JOB DESCRIPTION:

• Hands on experience in design, implementation of Splunk architecture.
• Experience on Linux and Windows administration
• Able to do data onboarding, fields extraction according to Splunk best practices.
• Able to provide Splunk guide and Splunk operation document
• Able to setup forwarders and onboard new data sources into the environment.
• Able to troubleshoot and identify Splunk issue relating to performance and searches.
• Able to fine tune Splunk use cases (rule) and optimize searches performance.
• Able to create new dashboard to enhance the visualization of the data and create Splunk use cases for alerts/reports.
• Knowledge on index segregation and user restriction setup
• Knowledge on using Splunk Enterprise Security
• Able to do Common Informational Model for Enterprise Security.
• Good in communication and able to understand the requirements.

Performs site engineer responsibilities for

managing all aspects of the construction,

installation, maintenance, and repair of

electrical power lines, electrical systems,

fixtures, apparatus, and appliances.

This individual is responsible for planning,

scheduling, assigning, participating in, and

inspecting the works of power linesmen,

electricians, and trades helpers. The employee

also has responsibility for supervising the

operation of an electrical repair shop. Work

includes the design and construction of

special electrical apparatus and fixtures and

the preparation of specifications and

estimates for construction, repair, and

installation projects. Large scale and complex

jobs are normally inspected upon completion

for conformance with specifications; smaller

jobs are checked for satisfactory operation by

the users of the equipment. Work is

performed under general direction of an

administrative superior and is reviewed

through discussions and inspection of

completed work.

DUTIES AND RESPONSIBILITIES

Plans, assigns, schedules, and supervises the

work of power linesmen, electricians, and

helpers engaged in the construction,

installation, maintenance, and repair of university power lines, electrical systems, fixtures, apparatus, and appliances;

participates in the more difficult work.

Trains and instructs subordinates on detailed

procedures. Conducts periodic inspections and gives onsite

supervision over hazardous or unusual

work assignment is; assures availability of

equipment, materials, and supplies.

Estimates the time and material costs

required for projected jobs; keeps cost and

job records and submits reports; initiates

requisitions for supplies, tools, and

equipment. Troubleshooting of all Electrical &

ELVS PLC Knowledge preferred

Perform & Supervises the installation of all

Electrical & ELVS

Enforces safety regulations, rules, and working

conditions.

Recruits and trains personnel in the safe

operation of equipment and tools.

EDUCATION AND EXPERIENCE:-

Degree or Higher ; 4 years of related

experience including site engineer or lead

experience and considerable experience as a

Lead Site Engineer or any equivalent

combination of training and experience.

Excellent communication skills.

KNOWLEDGE, SKILLS AND ABILITIES:-

Thorough knowledge of the practices,

methods, equipment, materials, and tools of

the electrical trade.

Thorough knowledge of the occupational

hazards and safety precautions of the work.

Ability to supervise the work k of skilled

workers.

Considerable knowledge of the National

Electrical Code for electrical installations.

Ability to interpret and work from instructions,

pencilled plans and sketches, and blue prints.

Ability to communicate and coordinate with

superiors, subordinates, vendors and Ability to estimate materials and labour costs.

Skill in the use and care of all hand and shop

tools and equipment of the electrician's trade.

n the broadest sense, project managers (PMs) are responsible for planning, organizing, and directing the completion of specific projects for an organization while ensuring these projects are on time, on budget, and within scope.

By overseeing complex projects from inception to completion, project managers have the potential to shape an organization’s trajectory, helping to reduce costs, maximize company efficiencies, and increase revenue.

The exact duties of a project manager will depend on their industry, organization, and the types of projects that a PM is tasked with overseeing. But across the board, all project managers share responsibilities across what’s commonly referred to as the “project life cycle,” which consists of five phases (or processes):

• Initiating
• Planning
• Executing
• Monitoring and Controlling
• Closing

• Perform preparation of design specifications
• Incorporate special features which relate to the project at hand into specifications. These include order of work, physical conditions at the site, construction work schedules, method of payment and measurement, construction procedures and special methods, and coordination with contractors and other stakeholders
• Perform technical review on specifications to ensure clarity, completeness, and exactness, and to remove restrictive descriptions so as to ensure competitive bidding
• Prepare project for advertisement by compiling contract specification into Electronic Bid Set (EBS)
• Visit proposed project site to obtain necessary information for use in creating project specification. This include condition and location of project site, location of storage and staging areas, and character and scope of work
• Provide guidance and technical advice to various persons and departments, including engineering personnel, Branch Chief, Section Chief, Engineering and Construction Department, and Architect-Engineer firms where necessary to develop basic specification procedure and policies to cover new types of projects and structures, and to make clearer various phases of the construction work
• Communicate with higher authorities on issues concerning specifications, engineering interpretations and explanations, supply of items, and items of work, and offer recommendations on reviewing specifications.

Responsibility

The holder of the position is mainly responsible for the following areas in coordination with his / her superior:

Design and build the DWH database models (star schema).

Manage the semantic model in Oracle Analytics Cloud to provide a unified view of our organization's data.

Manage application roles and access rights for end users including row level security filters, to protect sensitive data.

Work with ETL specialists, IT business Consulting as well as external vendors to ensure data ingestion and integration into the database model

Collaborate with Business Controlling and business counterparts on new reporting requirements.

Ensure data quality, security and compliance with industry standards and internal guidelines.

Ensure proper documentation of data infrastructure, data models, workflows as well as security concepts in accordance with internal security policies.

Skills

Looking for a Data Engineer more focused on Database modelling, Currently in Oracle environment and going forward with GCP stack.

Proficiency in SQL and data warehousing

Strong understanding of data modelling techniques and hands on experience building database models (star schema).

Expertise with ETL (extract, transform, load) processes. Familiarity with BI tool integration such as Tableau or Looker

Strong analytical thinking, problem-solving capability, and ability to translate business needs into technical specifications.

Customer-oriented with good communication and interpersonal skills.

• AUTO CAD Drafting for building & Steel Plate NESTING.
• Have a good knowledge in CAD MATIC.
• Preparing Engineering Drawings and steel weight checking.
• QA / QC Document controller.
• Have a good knowledge in M.S OFFICE.
• Material taking off for fabrication.(MTO)
• -Preparing Dimensional Reports

• Checking and inspecting the quality of works during construction.

• Checking actual construction according to drawings and specifications.

• Coordinate with the clients for whatever revision on drawings and in

actual Construction and Submit weekly site works progress report to

the client.

• Project Planning.

• Materials and Resources Forecasting and Procurement process.

• Execution of the Entire Building’s Structures and Finishes with Project

Team for smoothing the work progress.

.Office Administrator works

Responsibilities

- To assist Project Manager on the day-to-day management of the site, including supervising and monitoring the site labourforce and the work of any subcontractors

- Liaising with local authorities, client's representatives, sub-contractors and consultants.

- Checking and ensuring all plans and work are as per specifications

- Resolving any technical difficulties and problem that may arise on site.

Requirements

- Degree holder in Construction/Building or related discipline.

- Minimum 2years experience from Contruction background.

- Positive personality and good team player.

- Meticulous and responsible.

- Able to multi task and work in tight schedules.

- Able to start with short notice would be an advantage,

Main duties:

• Instrumentation team profile selection.
• Instrumentation works follow-up, correcting deviations with respect to the foreseen schedule.
• Instrumentation progress reporting.
• Interface with the Client
• Identification and assessment of client requirements out of scope.
• Works assignment within the instrumentation team.
• Co-ordination with other design disciplines,scheduling, cost control, Procurement and TR project management.
• Meetings with suppliers.
• Revision and approval of all instrumentation documents.

Main requirements:

• At least 5 years of experience in the same position in oil and gas projects.
• Enforcing obedience to Safety and Environment regulations, reviewing safety and environment manuals. Ensuring operational readiness off all emergency equipment in the Contractor.
• Knowledge of drafting tools: AutoCAD, uStation
• Experience in Fieldbus design
• Experience in DCS/ESD/F&G specifications.
• Knowledge of Process design.
• Knowledge of up-to-date instrumentation technologies and suppliers
• Proven experience in detail engineering of industrial plants.
• Intools expert user.
• Experience and understanding the EHS requirements

Working Place: Jurong Island

Element has an opportunity for an Calibration Engineer to join our rapidly expanding team.In this role, you will manage the equipment calibration within Element Singapore and Malaysia business units. Direct responsibility to Principal Quality Manager with functional responsibility to General Manager. The position will require the candidate to be eligible for permanent employment in Singapore. The Calibration Engineer is responsible for calibrating equipment and maintenance of records throughout the Element Singapore and Malaysia business units.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

1. Calibration of Equipment: (a) Perform regular calibration of testing and measurement, equipment to ensure accuracy and compliance with standards. (b) Verify and adjust instruments to meet technical specifications and industry guidelines.
2. Documentation and Reporting: (a) Maintain detailed calibration records, including test results, adjustments made, and equipment performance trends. (b) Generate calibration certificates and reports as required.
3. Compliance and Standards: (a) Ensure all equipment adheres to international, national, and organisational calibration standards (e.g., ISO/IEC 17025). (b) Support audits by providing necessary calibration documentation and demonstrating compliance.
4. Equipment Maintenance: (a) Monitor the performance of equipment to identify potential calibration or maintenance needs. (b) Conduct preventive maintenance and troubleshoot issues to minimise downtime.
5. Procedure Development: (a) Develop, review, and refine calibration procedures for various equipment types. (b) Standardise processes to improve efficiency and reliability.
6. Collaboration with Teams: (a) Work closely with the Quality team and Operational teams to address calibration needs. (b) Provide technical support and guidance to resolve instrument-related issues.
7. Training and Knowledge Sharing: (a) Train team members on proper calibration techniques and the importance of maintaining equipment accuracy. (b) Stay updated on new calibration methods, tools, and industry advancements.
8. Risk Management: (a) Identify risks associated with uncalibrated or faulty equipment and implement strategies to mitigate them. (b) Perform root cause analysis for calibration failures or discrepancies.
9. Inventory Management: (a) Maintain an inventory of calibrated tools, instruments, and reference standards. (b) Schedule periodic calibration and ensure timely replacement of outdated or damaged equipment.
10. Data Analysis and Trend Monitoring: (a) Analyse calibration data to identify trends, deviations, or potential areas of improvement. (b) Recommend corrective actions to improve equipment reliability and accuracy.
11. Regulatory Support: (a) Assist in external and internal audits by providing accurate calibration records and ensuring compliance with regulatory requirements.
12. Innovation and Process Improvement: (a) Propose and implement enhancements in calibration methods, technologies, and practices to increase efficiency and accuracy

Job Requirements:

• Minimum Bachelor Degree in in Materials Science or Materials Engineering
• Experience of working in an ISO / IEC 17025 calibration environment is a prerequisite.
• Effective organizational and time management skills with the ability prioritize activities.
• Ability to collaborate with colleagues and work effectively as part of a team.

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Coordinate with the engineering team and provide detailed drawings for installation

Updating layout, panel drawings for approval and as-built submissions.

Other ad-hoc duties that may be assigned from time to time

At least 5 years working experience in the construction industry （Electrical Works )

Basic knowledge on MEP construction works

Experienced with AutoCAD software

Chinese speaking preferred

JOB DESCRIPTION (ROLES AND RESPONSIBILITIES)

• Perform route mapping and navigation testing
• Assists in setting up the servers and other peripherals needed for robot operations
• Execute hardware and system upgrade or modification
• Provide technical support to the Service Team for Tier 3 - Software and System issues whenever necessary
• Conduct training to the Product Operators and Service Team for the newly setup system, equipping them with product operations and basic troubleshooting knowledge
• Coordinates with stakeholders, ensuring effective communication and providing regular progress reports
• Escalate higher level issue whenever necessary
• Prepare and submit relevant Operations documents as needed
• Execute ad hoc tasks on behalf of the Robotics Operations Team as needed

SKILLS AND QUALIFICATIONS

• Diploma, Bachelor’s or Associate’s degree in Mechanical/Electrical/Computer Engineering or other related fields
• Proven relevant work experience of at least 2 years
• Strong background in Autonomous Mobile Robots (AMR) and Automated Guided Vehicles (AGV)
• Familiarity in mechanical/electrical hardware installation, setup and troubleshooting
• Familiarity in system/network installation, setup and troubleshooting
• Familiarity in AutoCAD, ElcoCAD and any other design and planning software
• Familiarity of LINUX (Ubuntu) System and software troubleshooting will be an added advantage
• Ability to read and interpret mechanical / electrical prints and other related technical documentation
• Strong working knowledge of equipment, tools and components used in the industry
• Proficiency in using computers and basic applications such as MS Word, Excel and Powerpoint
• Ability to work independently and remain professional under pressure
• Ability to clearly communicate with colleagues and end users

ADDITIONAL REQUIREMENT

• Willing to travel locally in a short notice
• Comfortable to work overtime as needed
• Willing to be deployed overseas as needed

Work closely with project managers and stakeholders to coordinate project resources and information, ensuring that the project requirements are met. As a Project Engineer (PE) you will be responsible for working across multiple teams while executing project plans and revising as appropriate to meet changing needs and requirements.

Project Tasks

• Discipline in detailed documentation and reporting of projects plan, project status and issue logs.
• Identify and schedules customer-facing meetings to assure effective completion of projects Manages day-to-day operational aspects of a project schedule.
• To assist in install, setup, testing and provide technical support for the product installation team.
• Monitoring compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.
• Review technical documentation of projects and implementations as well as service deliverables.
• Manage customer relations by fostering productive and effective relationships with business users.
• Timely escalation of critical situations and any likely project risk that can impact project delivery scheduled to Manager.
• Effectively and accurately set client expectations and deliverables.
• Write documents describing functional specifications, protocols, test cases and maintenance guidelines for medical equipment.
• Keep documentation of implementation on all medical equipment.

Requirements

• At least 4 years of experience working in the IT industry, preferably involved in project delivery adopting SDL
• Familiar with Networking, Microsoft Operating System and SQL Server
• Relevant experience or interest in project management will be highly advantageous
• Excellent communication skills (both written and verbal) and interpersonal skills
• Great attention to details and results-oriented
• Ability to influence and present to the leadership team
• Committed to the values of integrity, accountability, transparency, scientific rigor and drive
• Good verbal and written communication skills

• Collaborate closely with clients, consultants, subcontractors, and other departments to address technical matters related to mechanical work.
• Possess the necessary qualifications, competencies, and skills to effectively manage and supervise mechanical works.
• Manage budgets, timelines and resources for mechanical project elements.
• Conduct risk assessments and implement safety measures throughout project phases.
• Monitor and report on project progress, identifying and addressing potential issues.
• Conduct quality inspections and ensure adherence to mechanical codes and standards.
• Provide technical support and guidance to project teams.
• Lead the on-site mechanical construction team to ensure smooth execution of work by subcontractors.
• Ensure full compliance with relevant standards, codes of practice, and safety regulations.
• Oversee all Mechanical issues on-site to ensure proper resolution.

REQUIREMENT:

Requirements

• Degree in Mechanical Engineering.
• Advanced proficiency in using company-specific software.
• Autocard
• Strong communication skills, both written and verbal.
• Expertise in design thinking for product innovation and improvement.

Job Description

• Reports to Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team

Job Responsibilities

• Assist and support Project Manager in handling and monitoring of smooth progress of project.
• Attending site walks, inspections, meetings and preparing of monthly reports and submissions.
• Coordinate and liaise with relevant parties to ensure smooth project implementation.
• To ensure and carried out site work in accordance to construction programme safely.
• Ensure supervisors and workers carry out daily site works accordingly with safety rules and regulations being observed.
• Must be familiar with all roads, drainage, sewers and all other infrastructure construction.
• To carry out all site works issues and ad-hoc duties when instructed.

Requirements

• Candidate must possess Bachelor’s degree in Civil Engineering (RE Recognised)
• Candidate to possess relevant certificates and Building Construction Supervisors Safety Course Certificate (BCSS)
• At least 3 years of working experience in the related field
• Preferably with Class 3 Driving Licence
• Good communication, self-initiative and interpersonal skills

RESPONSIBILITIES
• Scope, plan and execute multiple projects simultaneously.
• Supervise one or more highly technical personnel that resolve equipment operational issues; investigate errors, complete CAPA’s and remediate audit observation response items.
• Support investigations, participate and complete corrective actions/preventative actions (CAPA’s) based on root cause analysis and remediate audit observation response items.
• Support risk management initiatives to ensure organizational strategic objectives in the areas of asset capability, quality and production.
• Conducts Root Cause Analysis (RCA) or Root Cause Failure Analysis (RCFA).
• Troubleshoot complex systems.
• Develop required training and standards.
• Develop engineering solutions to improve the operational efficiency and uptime of production equipment.
• Work with equipment manufacturers to improve and upgrade equipment.
• Understand functionality and be familiar with computerized maintenance management system or asset management systems.

BASIC QUALIFICATIONS
• Bachelor’s degree in an engineering discipline or similar / equivalent discipline is required
• Experience in biotech pharmaceutical production equipments is required
• Engineering knowledge in one or more of the following: Electrical, Mechanical, Automation, Statistics, Maintenance, Reliability and Quality.
• Excellent written, communications and presentation skills.
• Possess good analytical and computer skills
• Have a thorough understanding of cGMP's
• Able to perform mathematical calculation and have the ability to perform complex data analysis

Responsibilities:

• Conduct tooling Contract review, mold design review, mold trial review, project review meetings
• Liaise with Designers, manufacturing Engineers, Planners on the progress of tool fabrication to achieve 100% on-time delivery
• Provide timely updates and Gantt charts to BD group
• Attend mold testing and perform molding process optimization to achieve part consistency quality
• Study FA report for dimensional rectification according product form fit functions as required by the customer
• Lead team in problem solving – identification of problems and analysis of the root cause
• Liaise with suppliers for mold outsourching on all tooling related issues
• Provide BD with technical support and customers with tooling feasibilities; Prepare quotation for engineering change requests
  

Requirements:

• Diploma / NITEC in Precision Machining, Tooling Technology or relevant
• Experience in project management and tooling technical incline
  Good analytical, communication and interpersonal relation skills
• Able to evaluate, diagnose and troubleshoot problems
• A team player with ability to work under minimum supervision
  

ServiceNow Engineer (ITSM)

What's on the offer

• Job Title: ServiceNow Engineer (ITSM)
• Job Type: Contract, 1 year renewable
• Industry: Consulting
• Salary Package: Base x 12 months only
• ITSM & HRSD experience is mandatory

Responsibilities:

• Collaborating with stakeholders - end-users, project managers, and technical team to document detailed requirements for the workflow application includes gathering information about business processes, user workflows, and system integration points
• Analyzing existing business processes and identifying opportunities for improvement, automation, and efficiency gains through the implementation of the regional workflow solution.
• Working closely with technical teams to design and document the workflow application's functional specifications. Ensure Processes and solutions design meet compliance & security requirements.
• Drive continuous improvement to optimized both system and work processes, Evaluate and identify suitable technology for workflow solution and Custom Web and mobile Applications
• Assisting in the development of user training materials and conducting user training sessions to ensure end-users are proficient in utilizing the workflow application.
• Support solution development and integration across the Software Development Life Cycle
• Drive for team’s research and develop technical prototypes for new product features, identify system improvement

Requirement:

• Needs to have experience in developing custom workflows using App Engine.
• Exhibit stronger knowledge in both technical end as well be able to leverage business process skills and technical skills in order to effectively bridge business requirements with technical solutions to support business analysis.
• Bachelor’s degree required (Information Technology related field); other advanced degree is a plus
• 1-5+ years’ experience in Workflow-based application; participate in minimum 4 end-to-end solution implementations/rollouts is preferable
• Experience delivering consulting engagements, managing customer expectations, and a command of the collaboration technologies and other components that make up ServiceNow/SharePoint collaboration product family.
• Deep technical knowledge and also possess the communication skills and organizational agility to guide customers through projects
• Good knowledge ServiceNow platform
• Good knowledge in Java, Microservices, REST APIs
• Familiarity with DevOps tools such as AzureDevOps will be advantage
• Self-motivated in learning new concepts and willing to share knowledge and skills with other team members.
• Outspoken and passionate about delivering well designed solutions that exceed business objectives and drive business success

1. Plan, design, co-ordinate with other consultants and construction management of Electrical services for all types of building projects.
2. Provide supports in project management and contract administration for building engineering contracts.
3. Preparation of tender documents and technical specification and evaluation of tenders and preparation of tender reports.

Job Description:

1. Managing hardware development from product definition through to production release.
2. Designing schematics and layouts for electronic systems.
3. Performing system bring-up and verification to ensure functionality and performance.
4. Identifying and troubleshooting hardware issues.
5. Reviewing and evaluating test reports during New Product Introduction (NPI).
6. Collaborating with platform design teams, including Firmware, Software, Layout, Mechanical, and Thermal.
7. Managing the Bill of Materials (BOM) for NPI projects.

Job Requirements:

1. Bachelor’s degree or higher in Electrical Engineering, Computer Engineering, Computer Science, or related fields.
2. Hands-on experience with design tools such as Cadence Concept HDL and Cadence Allegro.
3. Strong knowledge of Intel/AMD platform x86 architecture design.
4. In-depth understanding of PC and notebook system architecture.
5. Demonstrated skills in hardware debugging and testing.
6. Excellent organizational and planning abilities.
7. Practical soldering skills for hardware prototyping and debugging.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email to submit your resume.

Kindly send your resume in MS Word format to:

[email protected]

We regret only shortlisted candidates will be notified.

By submitting any application or resume to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Chew Hong Huang

EA Personnel Reg. No.: R24124128

• Provide technical services to the maintenance and troubleshooting of the different security, mechanical and electrical systems as company’s product.
• Attend and carry out Fault Finding and Diagnosis of systems breakdowns, both on a mechanical and electrical basis, with a focus on providing high levels of service and response times.
• Follow Preventive and Corrective Maintenance work schedules to specified standards and procedures and maintain all relevant written records as applicable.
• Attend to any operational and maintenance issues
• maintain records of breakdowns and repairs in compliance with ISO standards
• Assist in project related activities that include deployment, installation and testing.
• Assist in planning standby duties and implementing better strategies for improvement of maintenance operation
• Be available for on call and stand by duty procedures and other responsibilities required.
• To follow all company business operation and SOP at all times.
• Participate actively in Health Safety and Environment programs and activities in order to achieve Company’s KPIs, ISO 14001 objectives and target. Proactively rectify any abnormalities, unsafe acts or unsafe situations and report to supervisor accordingly.
• Maintain high standard of housekeeping at all times.
• Other operational and maintenance duties as assigned by Supervisor.

Requirements

• Diploma / NITEC in Electronic or Electrical or related field Minimum 2 year(s) relevant working experience
• Possess Class 3 Manual Driving Licence
• Must have knowledge in Security Systems and CCTV installation
• Committed and willing to perform standby duties when called upon
• Independent yet able to work as a team

We are looking for a skilled System Engineer to design, implement, and maintain IT systems and infrastructure. The ideal candidate will ensure system performance, security, and scalability while providing technical support and troubleshooting for various IT environments.

Responsibilities:

• Install, configure, and maintain servers, networks, and storage systems.
• Monitor and troubleshoot system performance and availability issues.
• Manage and support virtualization platforms (e.g., VMware, Hyper-V).
• Implement and enforce system security measures, including firewalls, patches, and updates.
• Develop and maintain system documentation, including network diagrams and procedures.
• Provide technical support to internal teams and end-users for IT-related issues.
• Automate routine tasks using scripting languages (e.g., PowerShell, Python).
• Collaborate with cross-functional teams to support IT projects and initiatives.
• Perform system backups and disaster recovery planning and testing.

Requirements:

• A graduate in Computer Science, IT, or related field (or equivalent experience).
• 3+ years of experience in system engineering or administration.
• Proficiency in Windows and Linux operating systems.
• Strong understanding of networking concepts (DNS, DHCP, TCP/IP) and hardware.
• Hands-on experience with server and storage management.
• Knowledge of virtualization and cloud platforms (e.g., AWS, Azure).
• Strong problem-solving and analytical skills.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Job Description & Requirements

• Liaise with Clients, Consultants, and Authorities for management of the project
• Must have the experience in Diaphragm wall and pilling
• Perform Civil/Structure engineering design works
• Responsible for on-site technical / engineering / administrative matters
• Involve in project planning, implementation, and close monitoring of projects
• Determine best materials and methods with Professional Engineers
• Liaise with Architects on design and safety of the structure
• Analysis of structural components with engineering software
• Prepare drawings, specifications, and computer models of the structure
• Ad-hoc duties as assigned by the Senior Engineer

Requirements:

• Candidate must possess at least Degree in Civil/Structural Engineering
• Minimum 15 years of LTA experience required
• Required Skill(s): Good communication and interpersonal skills, ability to liaise with all levels of people
• Relevant experience in the design of Buildings, Civil and Infrastructure works
• Preferably with project site co-ordination experience
• Knowledge of engineering software and MS Office

Position Summary

To supervise and coordinate the overall execution of projects assigned so as to ensure smooth delivery and handover to customers. This includes ensuring customers’ terms of order, meet delivery dates and installation completed with quality and safety standards as required by customers.

Job Description

• Manage and ensure project meets internal and client expectations with respect to quality, delivery timelines, and strategy required by Consultant/Owner with compliance to Workplace Safety Health (WSH) and prevent any Liquidated Damage (LD) imposed by Consultant/Owner.
• Maintain proper execution documentations and minutes of meeting to avoid claims and counter claims for delays or proof for extension of time with conduct periodic check on project filling and database to ensure it is properly file and relevant document are posted for easy reference.
• Develop and maintain good working relationship with the various parties at site that foster good client ties in the execution progress in order scope of works is not affected.
• Ensure own installation team and sub-contractors perform and comply with predefined quality scope of work and EHS standard.
• Communicate with Main Contractor/Consultant/Owner regarding project schedule and site facilities while manage customer changes throughout project and ensure deviations are commercially addressed ensuring configured documents are maintained at all times.
• Conduct bi-weekly project meeting with supervisor and feedback on the respective site issue and the progress of the projects.
• Assist General Manager and work closely with other departments, namely purchasing, quality control (QC) and Environment, health and safety (EHS) in promoting effective out-sourcing & sub-contracting.
• Review and approve WSH documents including Risk Assessment, Method of Statement, Safe Work Procedure, Fall Prevention Plan, Lifting Plan, Safety Management System, Permit to Work and ensure the work is carry out safely.
• Perform other tasks as delegated by the immediate superior.
• To comply with all relevant EHS legal and other requirements associated with the job functions and responsibilities.
• To comply with all EHS requirements affecting the operations, including those affecting the customers, suppliers and contractors supplying and serving the departments.
• To participate in EHS program.
• To follow the EHS procedures and work instructions.

Qualification & Experience

. Minimum Diploma in Engineering or equivalent years of experience.

· Minimum 3 years of working experiences in site management including 1 year of supervisory experience.

· Self-motivated with a results-driven approach.

· Good team player with ability to work independently.

· Working experience in a diverse cultural environment.

. Quality management system (QMS) fundamental & experience.

Automation Engineer is responsible for delivering technological solutions designed for software processes, collaborate with other teams to help identify and eliminate issues by collecting requirements and executing process automation.

Job Responsibilities:

• Plan and manage control engineering activities to ensure production and quality objectives are met
• Responsible for effective management of automatic control devices to achieve common factory goals
• Responsible for developing automation engineering issues to ensure system reliability and high availability
• Responsible for high-quality operation for automatic control equipment systems such as:
• - HMI/SCADA and PLCs (Siemens S7)
  - PLC programming
  - Control system
• Develop troubleshooting manuals, standard operating procedures, etc.
• Implement a Visual control system on the machine

Job Requirements:

• Degree in Electrical/ Electronics/ Mechatronics / Mechanical Engineering
• Experienced in multi type PLC programming & HMI Programming (Omron, Mitsubishi, Siemens S7 & WinCC)
• Experienced in SCL programming language and TIA Portal
• Knowledge of Codesys programming and SoftPLC will be an added advantage
• Knowledge of automatic control equipment, technical management, safety and environmental management, systems (ISO, GMP, HACCP), and control standard equipment (Robot, Vision, PLC, Servo press) will be an added advantage
• Committed and good team player with the ability to work independently
• Experience in Java, C++, C# to integrate with the company software system