• Continuous Service Improvement: Add value to Data Centre Operations by identifying improvement opportunities to sharpen Production stability, stakeholders experience and overall service quality.

• Identifying opportunities for automation within production processes to streamline operations and reduce manual intervention.

• Timely escalation and communication of major incidents such as escalation matrix, leading, driving, facilitating, and chairing all investigation activities.

• Being accountable for resolving the incident with workaround or permanent solution.

• Participate in troubleshooting system and network connectivity problems before escalation.

• Monitoring production metrics and performance indicators to ensure targets are met.

• Ensuring compliance with safety and regulatory standards in production.

• Other ad-hoc duties as instructed.

Good years of IT experience as Level 1 Production Operations engineer.

• Strong analytical skills: The ability to analyse production processes and identify areas for improvement and optimisation.

• Technical Proficiency: Profound knowledge of production systems issues and effective solutions to enhance operation efficiency.

• Problem-Solving Aptitude: A knack for troubleshooting production issues and devising effective solutions to enhance operational efficiency.

• Experience in Data Centre facilities, including temperature and humidity monitoring system, smoke detection and fire suppression systems, Uninterrupted Power Supply (UPS) units, CCTC, keypress units, etc. • Familiarity with AWS tools such as CloudWatch, Cloud Trail, etc would be an advantage.

• Able to work shift duties. -The shift hours are as follow:

▪ 1st shift - 7:00 am to 3:00 pm

▪ 2nd shift - 2:45 pm to 10:30 pm

▪ 3rd shift - 10:15 pm to 07:15 am

o The 8-day rotational shift pattern is as below:

▪ Two days 1st shift, followed by

▪ Two days 2nd shift, followed by

▪ Two days 3rd shift, followed by

▪ Two off days.

As a Firmware Engineer at Micron Technology, Inc., you will build groundbreaking high-performance controller firmware for volatile and non-volatile memory systems. You will assist in the evaluation, creation, build, bench testing, debugging, and failure analyzes of firmware for new high-performance memory controllers and Solid State Drives (SSD) that will improve performance, while reducing power, latency and SoC (System on Chip) complexity for the target sectors. You can expect to partner multi-disciplinary Engineers seek multi-functional product development issues. You will triage failures, file bug reports, and help the development teams with isolating issues.

Key Responsibilities:

• Develop and execute validation test plan on SSD devices on PC systems
• Design, develop, implement test cases required to validate Automotive SSD
• Work with Automotive customer systems and the automotive operating systems
• Analyze and writes test standards and procedures
• Maintain documentation of test results to assist in debugging and modification of software
• Analyze test results to ensure existing functionality, recommends and implement test coverage improvement actions
• Perform Failure analysis and work with other function groups to resolve SSD system issues
• Provide system analysis support for customer or yield related issues
• Improve customer integration experience

Requirements:

• Degree in Electrical and Electronics Engineering / Computer Engineering
• Knowledge and experience with embedded firmware development
• Expertise in the use of scripting languages, programming tools and environments
• Extensive experience programming in Python
• Experience in the storage industry in SSD, HDD, storage systems, or a related technology
• Understanding of storage interfaces including ideally PCIe/NVMe, SATA, or SAS
• Experience with NAND flash and other non-volatile storage
• Ability to work independently with a minimum of day-to-day supervision
• Experience with team leadership and/or supervising junior engineers and technicians
• Ability to work in a multi-functional team and under the pressure of multiple priorities

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Assistant Service Engineer/ Service Engineer
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $3800 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair & maintenance of commercial cleaning equipment; e.g. road sweepers, ride-on auto-scrubbers etc.
• Must be able to perform troubleshooting on various electrical circuitry.
• Able to lead a team of technicians to provide excellent service support.
• All other assigned duties.

APPLY NOW!!!

• Minimum Diploma (Electrical Engineering) with expertise in AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Minimum 1 year of experience in customer support and in repairing heavy industrial equipment.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65054 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: IT / Software
• Position Title: Data Center Engineer
• Working Location: Boon Lay
• Working Hours: 5 days, Mon – Fri (Morning Shift 6 AM – 2 PM / Afternoon Shift 2 PM – 10 PM)
• Salary Package: Basic Salary up to $5,000 + AWS + Bonus
• Duration: Permanent Role

Key Responsibilities

• Perform periodic walk-through, validation of equipment status, amber lights check, etc.
• Review work order requests in the queue and respond to semi-routine work orders by adhering to commitment times.
• Escalate and expedite orders to appropriate teams upon standard operating procedures.
• Rack and stack semi-routine customer equipment tickets.
• Support datacenter standard operating cross-connect work order requests.
• Support standard operating testing and standard operating installations of customer assets.
• Support standard operating procedures of layer 1 cross-connect certification testing.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma / Degree in IT/Computer Science, or related field.
• Minimum 1 year of IT experience or equivalent.
• Prior working experience in a Data Center, Network or Server environment would be an added advantage.
• Must be comfortable with shift rotation.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66104 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Sales Engineer
• Working Location: Island Wide
• Working Hours: 5.5 days (Monday to Friday 9 AM – 6 PM, Saturday 9 AM – 1 PM)
• Salary Package: Basic Salary up to $5,000 + AWS + Variable Bonus + Allowance + Commission
• Duration: Permanent

Key Responsibilities

• Drive sales growth in the APAC region.
• Handle all pre-sales and post-sales activities, including bidding, commercial negotiation, and technical requirements.
• Schedule weekly meetings with current and potential clients to introduce our organization.
• Collaborate closely with the Sales Manager on business planning and strategies, and assist in preparing sales reports for quarterly board presentations.
• Manage daily sales inquiries and quotations via email and phone for both existing and new clients.
• Frequently visit shipyards, vessels, refineries, and power plants to meet with technical managers and superintendents for sales discussions.
• Support the Service Team with on-board servicing for pre-docking inspections, dry-docking inspections, and final commissioning.

APPLY NOW!!!

• Diploma/Degree in Business Administration or equivalent.
• Experienced in power grid/water treatment sectors.
• Preferably with regional sales experience.
• Experience in electrical/mechanical fields is a plus.
• Proficient in MS Office.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67192 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

1) Conduct routine services and machine maintenance

2) Repair or replace machine transmissions, brakes, engines and other associated parts

3) Change engine and hydraulic oil, brake checks etc

4) Troubleshoot, repair, service and commissioning of equipment.

* Knowledge of diesel engine components and operational mechanisms

* Problem-solving ability

* Physically fit

5 days, Permanent, Paya Lebar

Our Client

Data Centre Builder , Data Center facility Management Company

Job scope

· Responsible for the management n implementation of data center building projects

· Plan and prepare work schedules when the project are awarded.

· Coordinate and manage work schedule, time line , progress with vendor and external contractor.

· Manage technical submission document and ensure technical drawing n material spec requirement are adhered to

· Regular site walk, Update client n company of project progress

· Resolve site issue with multiple parties

· Prepare n produce T&C report, SAT report and Test Script based on project/site requirement.

· Prepare and coordinate for Integrated Services Test (IST) with multiple parties before opening of data center

· Prepare operation n maintainence manual (OMM) and handover certificate.

Requirements

· Min Diploma in Electrical/Mechanical Engineering

· 3 years’ experience in data center M&E project management

Added advantage

· Proficiency with Authority and BCA Code of Practice.

Work location :Paya Lebar

Whats on offer

(1) Attractive package

(2) Stable Management

(3) Dynamic work environment

Please submit resumes(in MS word document format) to [email protected] with the following details :

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Michelle Goh

EA License No : 22C1142

We regret that only shortlisted candidates will be notified.

As a Product Yield Analysis (PYA) ESDA Engineer at Micron Technology, Inc., your primarily responsibilities will be setup ESDA for new products, maintain and enhance ESDA systems, drive alignment across fabs on how ESDA data is collected, stored, analyzed and reported. Additionally, you will be responsible for communicating and coordinating ESDA activities with various Departments (Design, Product Engineering, Test, YE, RDA and IT).

ESDA (Enhanced Software for Defect Analysis) is the system used at Micron Technology, Inc., to categorize fails coming from the tester based on their pattern, size and location within the die. ESDA is used to identify defects detected during wafer fabrication responsible for tester fails as well.

Key Responsibilities:

ESDA setup for new products

• Ensure ESDA is available for all DRAM and NAND parts before first Silicon reaches Probe.
• Verify that setup is correct and ESDA data is available to YE groups.
• Enable ESDA on new technology and new test data.

Maintain ESDA System

• Monitor Micron’s current ESDA system for problems in its ability to collect complete and accurate data in a timely fashion.
• Be a central point of contact for customer problems with ESDA.
• Identify root cause of ESDA problems quickly and solve or contact and work with responsible department to solve.
• Forecast future needs for ESDA system and be pro-active in addressing.

Improving ESDA System

• Identify opportunities to leverage ESDA data for yield improvement and reliability improvement.
• Improve ability to use ESDA for defect matching for feedback to RDA and YE.
• Create Engineering software tools for ESDA analysis and product line monitoring.
• Work with FA groups on tactical issues involving ESDA analysis to understand current usage.

Alignment

• Drive for alignment across fabs on how ESDA data is collected, stored, analyzed and reported.
• Help in establishing common company-wide criteria for measuring performance of ESDA system.
• Work with other departments/sites on prioritizing ESDA related projects (with timelines and deliverables).
• Facilitate meetings across departments to get input and consensus on improvements/fixes to ESDA.

Requirements:

• Degree in Electrical and Electronics Engineering / Computer Engineering or equivalent.
• Experience with memory products in one or more of the these areas: Product Engineering / Product Test / Product Design / Product Yield Enhancement
• Proficiency in at least one programming language, preference for C, C++, Python.
• Familiar with OOP concepts and implementation.
• Familiarity with web development beneficial (html, javascript, css, Angular)
• Familiar with Unix Shell environments
• Familiar with source control (Git, Jira, Jenkins).
• Excellent problem-solving and analytical skills.
• Ability to work in a fast-paced environment and communicate effectively (written and verbal) across multiple locations and teams.
• Strong skills in communicating complex technical ideas/concepts.

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Assistant Engineer / Mechatronics Assistant Engineer
• Working Location: Woodlands
• Working Hours: 5 days’ work (Mon – Fri: 8am to 6pm)
• Salary Package: Up to $3000 + AWS
• Duration: Permanent Role

Key Responsibilities

• Perform electrical wiring including installation, servicing and troubleshooting of machine equipment
• Identify and document issues in assembly and testing phases
• Conduct on-site machine commissioning and client training
• Complete in-house automation machine assembly and wiring
• Analyze and solve machinery issues during testing and commissioning

APPLY NOW!!!

• ITE/Diploma in Engineering or related field
• Individuals without experience but with a keen interest in engineering are encouraged to apply

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66189 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Engineering (Marine Industry)
• Position Title: Mechanical Engineer
• Working Location: Gul Circle
• Working Hours: 5 days (Mon to Thurs 8 am to 6 pm, Fri 8 am to 5 pm)
• Salary Package: Basic Salary up to $5,000 + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Follow up on projects from start to finish, including quotation, on-site work, invoicing, and service report.
• Lead technician teams through projects.
• Independently execute engine repairs and overhauls on board and on site.
• Dismantle, repair, replace, and reassemble mechanical parts.
• Troubleshoot and recommend repair solutions for machinery breakdowns.
• Conduct daily toolbox meetings with teams, ensuring safe work practices.
• Complete repairs, maintenance, and overhauls on time.
• Deliver high-quality services to satisfy customers.
• Prepare quotations for new inquiries and manage job costs within budget.
• Prepare service reports after project completion.
• Plan job methods and work schedules.
• Communicate with customers to ensure smooth project completion.
• Coordinate with local or overseas agents for job deployment and preparation.

APPLY NOW!!!

• Diploma or Degree in Marine/Mechanical Engineering or equivalent
• At least 3 years of ship repair experience in Singapore
• Able to work with tight schedules to accommodate ship arrival times
• Willing to perform hands-on mechanical repairs, installations, and removals
• Willing to work on-site, on board vessels, and in workshops with occasional irregular hours

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67187 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

As a Product Yield Analysis (PYA) ESDA Engineer at Micron Technology, Inc., your primarily responsibilities will be setup ESDA for new products, maintain and enhance ESDA systems, drive alignment across fabs on how ESDA data is collected, stored, analyzed and reported. Additionally, you will be responsible for communicating and coordinating ESDA activities with various Departments (Design, Product Engineering, Test, YE, RDA and IT).

ESDA (Enhanced Software for Defect Analysis) is the system used at Micron Technology, Inc., to categorize fails coming from the tester based on their pattern, size and location within the die. ESDA is used to identify defects detected during wafer fabrication responsible for tester fails as well.

Key Responsibilities:

ESDA setup for new products

• Ensure ESDA is available for all DRAM and NAND parts before first Silicon reaches Probe.
• Verify that setup is correct and ESDA data is available to YE groups.
• Enable ESDA on new technology and new test data.

Maintain ESDA System

• Monitor Micron’s current ESDA system for problems in its ability to collect complete and accurate data in a timely fashion.
• Be a central point of contact for customer problems with ESDA.
• Identify root cause of ESDA problems quickly and solve or contact and work with responsible department to solve.
• Forecast future needs for ESDA system and be pro-active in addressing.

Improving ESDA System

• Identify opportunities to leverage ESDA data for yield improvement and reliability improvement.
• Improve ability to use ESDA for defect matching for feedback to RDA and YE.
• Create Engineering software tools for ESDA analysis and product line monitoring.
• Work with FA groups on tactical issues involving ESDA analysis to understand current usage.

Alignment

• Drive for alignment across fabs on how ESDA data is collected, stored, analyzed and reported.
• Help in establishing common company-wide criteria for measuring performance of ESDA system.
• Work with other departments/sites on prioritizing ESDA related projects (with timelines and deliverables).
• Facilitate meetings across departments to get input and consensus on improvements/fixes to ESDA.

Requirements:

• Degree in Electrical and Electronics Engineering / Computer Engineering or equivalent.
• Experience with memory products in one or more of the these areas: Product Engineering / Product Test / Product Design / Product Yield Enhancement
• Proficiency in at least one programming language, preference for C, C++, Python.
• Familiar with OOP concepts and implementation.
• Familiarity with web development beneficial (html, javascript, css, Angular)
• Familiar with Unix Shell environments
• Familiar with source control (Git, Jira, Jenkins).
• Excellent problem-solving and analytical skills.
• Ability to work in a fast-paced environment and communicate effectively (written and verbal) across multiple locations and teams.
• Strong skills in communicating complex technical ideas/concepts.

Job Description

• Industry/ Organization Type: Security System Service Provider
• Position Title: Project Engineer (IT)
• Working Location: East (Nearest MRT: Tai Seng)
• Working Hours: 5 days (Monday-Friday, 9 am to 6 pm)
• Salary Package: Up to SGD 3500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Set up equipment for various systems and conduct testing and commissioning.
• Install electronic systems, including cabling and storage devices.
• Perform troubleshooting, repairs, and preventative maintenance on electronic systems.
• Manage projects and follow up with clients.
• Provide onsite support to diagnose and resolve technical issues.

APPLY NOW!!!

• Min. Diploma in IT or Engineering field
• Min. 1 year of working experience in Project Management or related field
• Familiar with Windows, Word, PowerPoint, Excel, and Access

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66287 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: M&E Consultancy Firm
• Position Title: Mechanical Engineer (Building and Infrastructure)
• Working Location: East – Paya Lebar
• Working Hours: 5 days (Mon-Fri: 8.30 am - 6 pm)
• Salary Package: Up to SGD 5500 + Bonus
• Duration: Permanent

Key Responsibilities

• Build relationships with clients, consultants, and contractors from other organizations
• Carry out duties in accordance with company procedures and implement prescribed systems of work
• Understand design philosophy/design fundamentals and communicate engineering solutions to project stakeholders
• Perform engineering calculations with the aid of engineering software such as Computational Fluid Dynamics (CFD), and Full Hydraulic Calculation (FHC)
• Familiar with Architect, Structural/Service Engineers drawings/specifications.
• Carry out investigative and technical review works
• Responsible for the development and production of drawings/calculations/specifications /reports
• Set an example for the placement of students and younger engineers

APPLY NOW!!!

• Degree in Mechanical Engineering recognized by PEB Singapore
• Min. 2 years of working experience in the consultancy firm in the design of ACMV, fire, and hydraulic services
• Experience as a Contractor in project execution will be considered
• Experience in Energy Storage System (ESS) / Capability in carbon, sustainability, resources conservation, and renewables will be an added advantage.
• Carry out tasks and duties assigned in a positive and dignified manner

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67061 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

INTRODUCTION
This is a Research & Development (R&D) Application Engineer/ Chemist position within the Electronic and Industrial Finishing (EIF) Group. This role is located in our Innovation Lab, Kallang Singapore.

Your role will be highly involve in development and improvement of metallization products for telecom, data center, consumer, and other electronics end markets. You will work in partnership with our global team of scientists and engineers to develop and commercialize industry-leading metallization products that deliver enhanced performance for the diverse electronics markets we serve. You will focus on the development and improvement of chemistries and processes within the metallization research platform.

YOUR KEY RESPONSIBILITIES:

• Evaluate and refine new metallization products via routine testing and analysis
• Compliance with environmental health and safety best practices
• Produce and provide samples of existing and early-stage products to customers for evaluation, feedback, and iteration
• Provide on-site technical assistance to customers during early installations of new products
• Conduct experiments and evaluations independently and as part of a team while exhibiting a strong commitment to safety at all levels
• Participate in team approach to product development by sharing knowledge, ideas, and creativity
• Evaluate and communicate customer’s critical requirements for successful product implementation
• Collaborate with R&D and other functions to successfully meet commercialization requirements

EDUCATION, EXPERIENCE & QUALIFICATIONS:

• Experience with applied electrochemistry and electroplating techniques, inorganic chemistry, corrosion science, surface science and/or metallization techniques is required
• A Bachelor’s or Master’s degree in Chemistry or a relevant applied science is required
• Experience with a wide range of analytical techniques including SEM/EDS, XRF, XRD, wet chemical techniques, or surface analysis methods
• Background in formulating new products, track record of innovation, and excellent practical laboratory skills is preferred
• Good problem-solving skills and ability to quickly become competent in an unfamiliar area of work
• Effective verbal and written communication on all aspects of program activity, including demonstrated ability to make clear, persuasive, concise, and well-organized oral presentations
• Excellent time management skills and strong bias for action
• Must be able to work well in teams and to work independently with limited supervision
• Strong commitment to core safety values and best practices for safety including review of risk assessments, job safety analyses, standard operating procedures and MSDS
• Position may require some travel to international locations and customer facilities
• Travel Expectations: may require up to 20% travel to customer facilities and international locations.

5days ,permanent, Aljunied

Product

Heating , ventilation, air conditioning (Hvac)solution for data center

Our client

MNC in air conditioning and humidification system solution serving high tech industry

Years in business : > 70 years worldwide

Area of business: Global

Job scope

· To design and draw HVAC solutions, to perform heat load calculations for clients.

· To visit site and attend to meetings with clients

· Submission of project specifications and certifications for client's approval.

· Sourcing of competitively priced equipment for the project

· To see through successful completion of project from inception to commissioning.

Requirements

· Min Diploma in Electrical/Mechanical/Electronic

· 2Years experience in HVAC design, installation ,commissioning works.

· 2 years experience in data center hvac project management

· Proficient in Auto-cad interpretation of job site drawings.

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Job Description

• Industry/ Organization Type: Marine Spare Parts & Machinery Supplier
• Position Title: Marine Service Engineer
• Working Location: West – Gul Circle
• Working Hours: 5.5 days (Mon-Fri: 8 am-6 pm, every Sat: 8 am-1 pm)
• Salary Package: Up to SGD 5000 + Bonus + On-site allowance
• Duration: Permanent

Key Responsibilities

• In-charge of repair / service sales division
• Main Engine & aux engine repair, pumps, compressors, purifier and hydraulic at shipyard, working anchorage, OPL, follow voyage, PSA & Jurong port (ship owner, ship manager / Shipyard – DDW Pax ocean, ST Marine, Keppel / Industry – sewage treatment, Jurong & Kranji / Spares & equipment supplier / Engineer solution)
• Prepare & submit repair /service quotation to customer
• Get quotation from repairer
• Co-ordinate and arrange internal and external service team
• Co-ordinate between customer, agent & vessel for dispatching our teams to go onboard vessel to carry out repair/servicing job and or pre-work inspection
• Follow up with customer on status of our offer
• Co-ordinate with repairer & customer for any claims, dispute or complaint on work done or supply
• Prepare & submit inspection / service report to customer in accordance with ISO requirement & standard, filing of report is part of the job scope as per requirement
• Update & submit, sales report - quotation, enquiry against actual sale statistic report by weekly, monthly & yearly
• Co-ordinate between the sales team & production / service team for reconditioning work of stock item
• Coard vessel to meet Capt / Chief engineer for service & spares sales call & inspection in due course
• Carry out risk assessment for each service and observe safe work practice and regulations onboard vessels & in the workshop is part of the job responsibilities

APPLY NOW!!!

• Min. ITE in Marine or Mechanical Engineering
• Min. 3 years of working experience in the Marine industry
• Must have Hands-on experience on 2 & 4 stroke engines, purifiers, pumps, and air compressors
• Those with sailing experience are welcome

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66039 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Overview: -

• Monthly Salary: Up to $3500 + AWB + Bonus (depend on EXP)
• Location: Loyang, Pasir Ris
• 5 Days (Monday to Friday), Office Hours

Your Responsibilities: -

• Develop, document, and support the creation of high-precision plastic injection molds and components for manufacturing.
• Assist the Program team during the initial project quotation phase by providing accurate tooling and product DFM (Design for Manufacturability) that aligns with quality standards.
• Engage with customers for DFM and mold concept reviews to ensure their technical requirements and concerns are properly addressed.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.

You will need: -

• Previous experience or knowledge in Precision Tooling Design/Fabrication, Micro Plastic Injection Molding, or Manufacturing Process Engineering is preferred.
• Proficiency in 3D CAD software, specifically Siemens UG NX or PTC Creo 4.0 and above.

For interested applicants, kindly click "Apply Now"

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Assistant Mechanical Engineer (Assembly)
• Working Location: Woodlands
• Working Hours: 5 days (Monday to Friday, 8.30 am – 5.30 pm)
• Salary Package: Basic up to $3500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assemble, debug, and test-run customized modular machines.
• Handle the commissioning of these machines.
• Provide technical support at customer locations to ensure proper equipment operation.
• Implement design improvements to simplify designs, reduce parts, and use cost-effective alternatives, while maintaining or enhancing product performance.
• Procure or assist in procuring necessary items to perform the above duties effectively.
• Write and maintain all required documentation, including work and assembly instructions, as well as manufacturing and test procedures.

APPLY NOW!!!

• Nitec, Higher Nitec, or Diploma in Mechanical Engineering with 2 to 3 years of relevant industry experience.
• Knowledge of industrial automation, jigs, fixture design, FMEA, SPC, and CAD as well as experience in machine design are added advantages.
• Ability to work independently with minimal supervision.
• Willingness to travel as required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67302 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Data Framework Engineer

Expected Years of Experience: 8-10 years

SCOPE OF THE ROLE

You will be responsible for the end-to-end software development and support for all work related to projects, quarterly change requests, L3 production fixes. This includes software product implementation and administration, application design, development, implementation, testing and support.

You will also be responsible for quality assurance of the team’s delivery in conformance with the Bank-defined software delivery methodology and tools. You will partner with other technology functions to help deliver required technology solutions.

Other responsibilities include:

- Create frameworks, technical features which helps in faster operationalisation of Data models, Analytical models (including AI/ML) and user generated contents (dashboards, reports etc)

- Effectively partner with data scientists in enabling faster adoption of AL/ML model based systems

- Independently install, customise and integrate software packages and programs

- Carry out POCs involving new data technologies

- Design and develop application frameworks for data integration

- Create technical documents such as solution design, program specifications for target solutions

- Perform design and development of applications which may not be limited to: Software Applications, Data Integration, User Interfaces, Automation

- Maintain and recommend software improvements to ensure a platform centric management of software applications

- Performance tuning

- Work with production support team members to conduct root cause analysis of issues, review new and existing code and/or perform unit testing

- Perform tasks as part of a cross functional development team using agile or other methodologies and utilising project management software

Technical skillsets

TEAM Architecture (Big Data)

- 8+ years of experience with application development in Big Data Ecosystem (such as Cloudera, ElasticSearch, Spark, Presto, Hive, Impala, Kibana, Logstash, Hbase, Kafka),

- Expertise in building applications using Java, Scala, Python, Shell scripting

- Experience in large scale implementations and performance optimizations in the Big Data Ecosystem using Spark, Hive, Impala, Apache Kudu, Ozone, Presto, Tez, Iceberg etc

- Knowledge of frameworks such as Spring, Struts, Hibernate etc

- Knowledge of Object Oriented Programming, Multi-threading, Containerization, etc

- Knowledge of related technologies such as HTML, Javascript, CSS, React, Jquery, node.js, docker

- Knowledge of Elastic, Kibana, Logstash, Hive, Sqoop, MongoDB, Oozie, Flume, Kafka

- Expertise in integrating applications with Devops tools

- Knowledge of building applications on MPP appliances such as Teradata, Greenplum, Netezza is a plus

At least, 2 to 3 technical certifications in any of the below technologies:

1. Language – SQL, Java, Python, Scala, Javascript, node.js
2. Automation / scripting – CtrlM, Shell Scripting, Groovy
3. Cloudera Hadoop distribution – Hive, Impala, Spark, Kudo, Kafka, Flume

Additional Experience required for all teams to create an added advantage:

1. CI/CD software, Testing Tools - Jenkins, SonarQube
2. Version Control Tool - Aldon+LMe, CA Endeavor
3. Deployment Tool kit -Jenkins
4. Service or Incident Management (IcM) Tools - Remedy
5. Source Code Repository Tool - Bitbucket
6. Scheduling Tool - Control-M
7. Defect Management Tool - JIRA
8. Application Testing tool – QuerySurge
9. Cloud certification
10. Platforms provided by FICO, Experian, SAS for credit and portfolio management

EDUCATION

- Bachelor’s degree/University degree in Computer Science, Engineering, or equivalent experience

Job Description

• Industry/ Organization Type: Manufacturing (Electronics)
• Position Title: Regional Technical Engineer (APAC) / IT Support Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 9 AM – 6 PM)
• Salary Package: Basic Salary up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Provide technical support to the sales team and customers for Proof of Concept (PoC), project deployment, post-sales support, and internal simulation testing.
• Study system and product technical details to offer technical advice or support to customers and the sales team.
• Evaluate product specifications to improve system performance.
• Communicate with HQ programmers about customized software functionality requirements or 3rd party software integration (API) details.
• Build and maintain strong relationships with customers.
• Offer troubleshooting assistance to customers from the office or on-site.
• Manage demo products and maintain the filing of technical information.
• Set up and manage demo equipment for tradeshows.
• Monitor customer satisfaction to ensure outstanding customer value.
• Develop and maintain technical competence in company products, applications, and services.
• Create technical information such as datasheets, manuals, and training materials.
• Conduct technical presentations or training for customers.
• Assist in overall company operations for self-development toward a managerial position.
• Provide timely updates through the Vaxtor Project/PoC Management tool.
• Any ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma in IT, Computer Engineering or Electronics, or equivalent
• Minimum 2-3 years of relevant experience in the electronics industry
• Knowledge of ANPR software and Intelligent Traffic System will have an advantage
• Experience with OCR, Computer Vision, Machine Learning and AI technologies is a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67173 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Assist Project Manager on Earth Control Measures (ECM) plan
• To inspect and examine the workplace to ensure environmental compliance
• Identify and discuss environmental health irregularities with superior and recommend measures to rectify such irregularities
• Liaise with authorities and clients on matters pertaining to environmental complaints and related issues
• Ensure that good housekeeping methods are always practiced at site
• Must possess a Certificate of Competency in Earth Control Measures
• Must be registered ECO
• At least 5 years of working experience in Building & Construction in HDB (BTO) project

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

§ Planning, co-ordination and execution of LTA and SMRT projects

§ To attend all interface and co-ordination meetings with different stakeholders and contractors

§ Installation, monitoring, supervision, testing and troubleshooting of RTU at site

§ Preparation of project documents and drawings

Requirements:

§ Relevant Diploma in Electrical Engineering/Computer Engineering from a recognised Polytechnic

§ Strong interpersonal skill with a positive attitude

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Job Requirements :

• Bachelor Degree in Civil Engineering recognised by PE Board ( Singapore )
• Minimum 1 to 2 years of design experience in a local consultant firm
• Graduate engineer with a positive attitude may also apply
• Candidates with ( partial ) overseas experience may be considered
• Conversant with current design codes and design process in Singapore
• Independent and organised, with positive work attitude
• Willing to put in extra effort / time when need arises
• Strong communication skills and effective team player
• Proficiency with ACAD will be an added advantage
• Able to execute submission to relevant agencies / authorities in Singapore
• Able to co-ordinate projects with other team members
• Willing to learn architectural permitting / compliances to Singapore authorities

`

Job Description :

• Support Senior Engineers in the detail design and design coordination of Civil, Structural and Geotechnical projects.
• Responsible for the execution of structural design and drafting works
• Preparation of calculations and review of structural design drawings
• Customer specifications, applicable codes, standards and other generally accepted
• practices.

Responsibilities :

• Design of temporary and permanent works
• Carrying out analysis design of buildings and infrastructure
• Co-ordination of projects including submission to local authorities and liaison during the construction stage
• Liaise with clients, consultant, and authorities on technical matters