Assignment

1. The Mechanical Engineer is assigned to Technical Centre Singapore (TC SG)
2. The Mechanical Engineer reports to the Mechanical department Manager of TC SG
3. The Mechanical Engineer is based in Singapore
4. The Mechanical Engineer will mainly work in Singapore, travel to jobsites (worldwide) is occasionaly required

Experience

1. The candidate has a degree in mechanical engineering
2. Experience in the field of hydraulics will be a plus
3. Experience in electrical engineering will be a plus
4. Experience with AutoCad is required
5. Experience with Inventor software will be a plus
6. English will be the common used language and the candidate needs to have an advanced level of English both written and oral
7. Knowledge of other languages will be a plus

Responsibilities

1. Carries out design in accordance with indications of Engineer in Charge
2. Understands the time frame (deadlines), monitors progress and informs on changes
3. Manages drafting manpower assigned to her / him with regards to quality, schedule and manhours spent
4. Understands and mitigates the technical risks associated with the task
5. Seeks advice from senior staff if she / he cannot solve a problem on her / his own

• Understanding of Internet technologies (such as routing, switching, and network infrastructure) and technologies related to the ISP sector
• Possessing excellent analytical and problem-solving abilities, with a talent for addressing technical and operational issues.
• Skilled in network management and maintenance with a strong dedication to offering assistance with technical issues.
• Experience in IT audit or CISA/CISM certified preferred or operational risk management and control self-assessment or prior experience in implementing security solution and information security governance
• Management of Enterprise Data Network includes administration, patching, upgrades, and migration tasks, as well as designing, preparing HLD/LLD, leading implementation teams, and managing service levels, demands, incidents, and changes.
• Cisco/Aruba Switching /Routing & WLAN
• DDI, AAA/Cisco ISE
• Network Automation: Python & Ansible
• As Built, LLD, Testing & Acceptance Testing Documentation Skills
• ZScaler & Network Security
• Certification: CCNP/CCDA equivalent
• Meraki, Palo alto, f5 loadbalancer, UTP
• Provide network WAN/LAN design, implementation, consulting, Cisco, Aruba, Juniper
• Conduct a network audit to pinpoint any deficiencies and recommend appropriate solutions. Assisting with RFP/RFI reply.
• Experience in overseeing operations using ITIL methods / Project Management certification - PMP

Job Description:

• Plan/Design of evaluation/bench test board PCB
• Guide ATE test engineer on test method of the IC
• Test Devices in lab for correlation with ATE
• Plan and test Device Qualification runs (HTOL, ESD, LU) with external test house

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Electrical/Electronic) or equivalent.
• At least 3 Year(s) of working experience in application/ validation

The team

Join BIPO Global Innovation Hub on an adventure to make BIPO the best HR solutions provider in the world. We make life easier for our customers and employees, always finding the next 80/20 in business, in data and in people. We conceive, communicate, and build unique capabilities for BIPO that will need to live up to proof-points. This is not an easy job but one that will put to test our strengths, vulnerabilities, and prioritisation, very much like a team sport. If you enjoy a sense of camaraderie at work, this is the place for you.

The role

We welcome anyone with some proven core technical strengths and outcome driven to have a chat with us. If you do not have the breadth but can show depth, we want to talk to you.

Responsibilities

• Build and maintain scalable backend services on cloud infrastructure to support smart rostering systems and LSTM-based demand predictions.
• Implement DevOps and MLOps, focusing on continuous integration, continuous deployment (CI/CD), and automated management of machine learning model lifecycles.
• Design, develop, and maintain robust features for the BI platform with a specific focus on enhancing the rostering and demand prediction capabilities.
• Work closely with AI engineers and IT teams to integrate various data pipelines, ensuring seamless data flow and synchronization across platforms.

Qualifications

• Bachelor's degree in Computer Science, Data Science, or a related technical field, or equivalent practical experience.
• Proficiency in programming languages such as Python, with experience in constraint programming, optimization algorithms, and machine learning techniques.
• Familiarity with relational and NoSQL databases for data storage and retrieval.
• Knowledge of web architecture and technologies, including web security, REST, and microservices.
• Experience with containerization technologies such as Docker and orchestration tools like Kubernetes.
• Experience with cloud services (AWS, Azure, Google Cloud) and building scalable applications.
• Excellent problem-solving skills and the ability to communicate technical concepts effectively.

• Atleast complted Bechelor of Civl Engineer or equilant.
• Preparing site reports and completing other site documentation
• Conducting preliminary site inspections of potential construction sites to determine essential tasks
• Developing labor and material cost estimates for a project
• Advising construction team on operational enhancements to lower costs and enhance efficiency
• Ensuring the construction team follows health and safety standards
• Resolving technical difficulties that occur during a construction project
• Connecting and negotiating with clients, subcontractors and other professional staff

Our Company

Our Company, Dex-Lab Pte Ltd, is a pioneering robotics and A.I company specializing in development of humanoid robotic solutions for healthcare, education and entertainment. Our mission is to drive workforce sustainability by deploying social robots that augment routine and repetitive tasks.

We are offering a unique job opportunity to join our multi-disciplined team of engineers, designers and artists where you can grow your skills while working on cutting-edge projects at the forefront of innovation.

Job Description

The selected candidate will be involved in the production of in-house humanoid robots for sale, offering after-sales maintenance support, and assisting with various ad-hoc tasks.

Additionally, based on your skill set and interests, you’ll have the chance to explore a wide range of career opportunities, including Operations, Robotics Software, Multimedia Design, and Marketing.

Key Responsibilities

• Assembling robots, including mechanical and electronic components, based on provided designs.
• Developing and interpreting electronics schematics and mechanical drawings.
• Wiring and integrating electronic systems for robots and related devices.
• Troubleshooting mechanical and electrical issues in robotic systems.
• Conducting tests and diagnostics to ensure proper functionality of robotic components.
• Maintaining and improving the assembly process to ensure efficiency and quality.
• Collaborating with the engineering team to optimize designs for assembly and performance.
• Documenting findings and providing regular updates to the engineering team.
• Assisting with inventory management and ensuring all tools and materials are available for assembly.
• Participating in the recruitment and training of junior engineers or apprentices.
• Attending relevant workshops and conferences to stay updated on advancements in robotics and mechatronics.
• Carrying out ad-hoc duties, such as on-site maintenance and system checks.

Requirements

• Diploma or BSc in mechatronics engineering, electronics, mechanical engineering, or a similar field.
• Strong knowledge of electronics schematics, wiring, and mechanical systems.
• Practical experience in robot assembly and troubleshooting.
• Ability to work independently or as part of a team.
• Strong problem-solving, analytical, and creative thinking skills.
• Passionate about robotics and engineering with a hands-on approach to tasks.

Understanding of Big Data Hadoop Ecosystem components (Sqoop, Hive, Pig, Flume)

Experience with Java or Big Data Technologies a plus

Any big data experience with Hadoop, HDFS, cluster management

Experience in designing & developing enterprise application solution for distributed systems

Experience with Hive, Pig & Map Reduce and Hadoop ECO system Framework

Experience in Hadoop and its components like HDFS, Apache Pig, Hive, Sqoop, Spark, Hbase, NIFI, Cassandra

Involved in Design and Development of technical specifications using Hadoop technology

Very well experienced in designing and developing both server side and client-side applications.

Role Description

As an Automation Engineer, you will be responsible to provide engineering subject matter expertise support to the manufacturing plants, utilities and site facilities operation to ensure consistent product supply and deliver production target. You will be entrusted with the responsibility to ensure maximum plant capabilities through continuous improvement so that equipment and facilities will be optimized in accordance to Good Manufacturing Practice, Good Engineering Practice and in compliance with regulatory requirements as well as EHSS requirements.

Responsibilities

• Lead operational plant troubleshooting efforts and investigation of production process, equipment, systems and code/configuration
• Provides support for the development of new product launch, new capabilities and optimization operational project initiatives to facilitate technical transfer of new program into manufacturing and provide the automation solution
• Provides technical support for new equipment/process start-ups and operation
• Provide operational support to the GMP processes including some off-hours on-call support
• Perform Root Cause Analysis, develop corrective and preventive actions and develop technical solutions to prevent recurrence
• Make changes to manufacturing process control under strict GMP change control management process to optimize processes and maintain compliance
• Responsible for the execution of all design, build and run activities
• Ensure robust testing of new configuration features based on structure risk assessments
• Work closely with stakeholder to ensure production supply
• Collaborate with cross functional team to resolve incidents, events or deviations
• Update or develop standard operating procedures, work instructions, functional / design specifications associated with automation process control.
• Promote Safety, Quality and Compliance culture and continuous improvement mindset that lead to plant safety, quality and compliance to regulatory requirement
• Support engineering process performance management, audit and inspection
• Provide training to plant personnel on automation control process
• Support Service Owner and System Owner roles for DeltaV within the company

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Job Scope for Electrical Engineer

Responsibilities

· Troubleshoot Plant Monitoring & Control System and Supervisory Control and Data Acquisition systems.

· Perform troubleshooting of electrical controls system.

· Upkeep proper filling system for maintenance records.

· Scheduling of preventive maintenance works.

· Managing all maintenance breakdown and ensure all faults are attended.

· Supervise onsite installations, testing and commissioning.

· Plan and co-ordinate with subcon and team members to execute all master schedules.

· Conduct routine inspection of the premises.

· Site meeting and liaising client.

Requirements

· Relevant University Degree in Electrical & Electronics or Electronics & Communication Engineering and equivalent with 3 years’ experience or relevant Diploma in Electrical & Electronics or Electronics & Communication Engineering and equivalent with 6 years’ experience

· Class 2 or 3 licence holder will be advantage

· 5.5 working days

Job Types: Full-time, Permanent

· Additional leave

· Professional development

Schedule:

• Day shift
• Night shift
• Weekend availability

Education:

• Local Polytechnic Diploma (Required)

Experience:

• Electrical engineering: 3 years (Required)

Work Location: In person

The Site Engineer (Building) is responsible for assisting the Site Agent on the progress of site works and manpower related aspects of the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Monitor and review master construction program and preparation of catch-up program, if applicable.
• Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Preparation of detailed method statements and work instructions for construction.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.
• Technical expertise and knowledge in Foundation, Structural and Building works
• Proficient in Microsoft Project
• Good knowledge on method statements

GEOLUTIONS is an independent geotechnical instrumentation specialist, executing specialized geotechnical contractor services for projects under the LTA, HDB, and private sectors. Our primary areas of expertise include foundation testing, instrumentation and monitoring, and site investigation activities.

WE ARE LOOKING FOR an experienced Project Engineer to manage the submission of MSRA, CAD drawings , NCE Applications , POWS applications , design calculations and related submissions to our clients.

JOB DESCRIPTION:

• Prepare design calculations, CAD drawings and MSRA , NCE Application , POWS Application for site investigation (and associated works) and foundation testing works
• Responsible for timely submission of method statements to client
• To coordinate & liaise with contractor, QP, or authorities for projects specifications & other technical requirements
• Attend meetings inclusive of technical meetings , Coordination Meetings and presentation with our clients
• Review comments from relevant authorities and respond to them
• Document control and compilation accordance to company SAC Singlas standards

QUALIFICATIONS & EXPERIENCE:

• Applicants should hold a degree in Civil Engineering , Geology or a related field.
• Candidates must be able to handle stress and maintain efficiency in a dynamic work setting.
• The ideal candidate should be capable of working independently while also being proactive in seeking advice from more experienced colleagues when necessary.
• Applicants should have at least two years of relevant work experience.
• Candidates must be skilled in using AutoCAD software.
• A strong understanding of instrumentation and monitoring, site investigation, and foundation design specifications is essential.
• Experience in foundation design, instrumentation and monitoring, and site investigation is highly preferred.

YOUR WORK ENVIRONMENT will be office-based at our Yishun location, with occasional site visits recommended to enhance your comprehension of the work involved. Our team is characterized by its youthful energy, dynamic spirit, and goal-oriented approach. The work environment is highly dynamic and presents a range of challenges. Matching the tempo of our operations will lead to rapid career advancement for those who can keep up with the pace.

Interested candidates, please submit your CV to [email protected] , [email protected]

The Structural Engineer assists the Project Manager in the supervision of all structural works in Project Site. Ensuring that works are carried out by construction coordinators and subcontractors are in accordance with specifications, drawings and stipulated work programme. At the same time making sure that quality requirement, standards and structural construction materials are efficiently utilized. The Structural Engineer plays a key role in coordinating with client’s representative, subcontractor and other trade coordinators and BIM (Building Information Modelling) team, and managing a team of construction coordinators to ensure project is completed profitably.

• Responsible for performing and overseeing engineering design works related to civil and structural aspects of projects.
• Act as a key point of contact for clients, consultants, and authorities. Manage communications and ensure project requirements are met.
• Manage technical, engineering, and administrative aspects of projects directly on-site.
• Participate in project planning, including scheduling, resource allocation, and budgeting.
• Monitor project progress closely, identify potential risks or delays, and implement solutions to mitigate them.
• Perform additional tasks as assigned by superiors.

Electrical Engineer (Satellite, Radio Frequency)/ Geotechnical Engineer

The Electrical Engineer is required to attend to pre-sale electrical matters and provide suggestions on project specification and give calculation on the amount of electricity consumption.

Responsibilities:

• To conduct and lead design reviews for Radio Frequency/ Satellite, Network communication systems.
• Responsible for SATCOM/Micro Wave system and network configurations, acceptance, interface and performance testing and commissioning of SATCOM/Microwave systems.
• Understand contractual and project requirements and specifications, propose and generate (SATCOM/MW) system architecture and designs.

Requirements:

• Good in handling Electrical Engineering skills and provide calculation on electricity consumption.
• Ability to calculate on the amount of Electricity required.
• Expert in electrical engineering.
• Good in handling Single diagram and sizing; SLD
• Responsible in handling Electrical Input and output of the equipment and Sizing of electrical equipment
• Good in handling Modulators and Voltage regulator
• Experience in handling Low noise amplifier and Electrical wiring.
• Good in handling Electricity Calculation, Drawing, Design and management of electrical specification with cost and time line.
• Strong knowledge of Radio Frequency, Microwave, Satellite (Satcom) and Microwave.
• Diploma/Degree in Electronics/Electrical Communication Engineering.
• Experience in handling Radio Frequency/ Satellite and Network.
• Proficient in operating RF and electronics test and measuring equipment such as signal generator and spectrum analyzer
• Experience in Satellite/Microwave Communications and Network is an added advantage.

We respect your privacy and all communication will be treated with confidentiality.

If you have meet the job requirements that we are looking for or wish to find out more on this role, please contact us or apply in-confidence to us with your updated resume in MS Words format to : [email protected]

*Only shortlisted candidate will be notified.

Lee Kelvin No. R1872625

STAR CAREER CONSULTING PTE. LTD (EA License: 20C0353)

• Perform end user IT Support
• Perform troubleshooting for client platform related problems
• Support Windows OS, office software, and other Desktop Related Software & Hardware Respond promptly to incident,
• investigate & provide temporary &/or permanent resolution of incidents escalated
• Liaise with support vendors for maintenance, support or issues resolution
• Monitor the agreed service level, document & maintain the configuration of the systems Involve in client platform implementation/upgrade project
• Any ad-hoc duties assigned / required.

Job Description & Requirements

Experience in web application development with an in-depth understanding of data structures, algorithms and software design principles.

• Exposure to cloud methodologies and experience with AWS or Azure is a plus. • Knowledge of AI/Machine Learning fundamentals.

• Experience in developing rich user interface using HTML5 and CSS3

• Experience working with NodeJS, Redux, Typescript, Webpack, NPM etc.

• Solid Proficiency in backend development including RESTful API, full-stack web-technologies, specifications and frameworks.

• Strong understanding of working with any databases like MSSQL/PostgreSQL/Oracle

• Experience building data models to support low latency reporting apps.

• Experience with software engineering best practices such as version control (e.g. git), CI/CD (e.g. Jenkins), testing, security and documentation

• Experience working on containerization and orchestration tools like Kubernetes and Docker.

• Bonus: Familiarity with common ML Ops tooling/platforms (i.e.) MLflow, Sagemaker, etc.

• Strong written and oral communication skills.

• Excellent problem solving and critical thinking with excellent ability to evaluate and apply new technologies in a short time

Benefits:

• Basic Salary up to $3,900 with yearly increment based on performance.
• 5 days (Monday to Friday) | 8.15am to 6pm
• Our company emphasises on good career progression.

Job Description:

This is a full time role for a Mechanical Engineer located in Sin Ming Ln. Our clients are doing Engine Servicing, Alternator Servicing, Control Panel Supply and Installation. You will be responsible for repairing and servicing various equipment and engines (Cummins, Volvo, Perkins, Man, Caterpillar, and Deutz) as scheduled by the Service Manager. The individual will troubleshoot and diagnose electrical and electronic circuits, including generators and control panels, and identify necessary parts for quotations. Testing and commissioning of engines and generators are also required. They should be able to read electrical and electronic drawings and conduct equipment surveys to determine the scope of repairs or services needed. Additionally, the role involves troubleshooting and repairing engine wiring harnesses and alternator wirings, constructing or modifying control panels (ACIDC) for engines and generators, and maintaining machinery, tools, and the service area.

Qualifications:

• 1 year relevant experience

• Basic up to $3.5k + Commission+ Transport Allowance
• North area of Singapore
• 5 days
• AWS + VB (depend on performance) + 14 days AL

Job scopes:

• Explain product features and solutions to meet customer needs.
• Build strong relationships with clients and identify new business opportunities.
• Prepare proposals, conduct product demonstrations, and offer training to clients.
• Analyse industry trends and competitors to guide sales strategies.

Job Requirements:

• Diploma/Certification in Engineering relevant courses
• 0-2 years of B2B sales experience
• Valid class 3 license

For consideration, kindly submit your CV by clicking “APPLY NOW” or TEXT +65 8432 3555 for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24123737 | Lim Jia Le

• Respond to a typical production situations and emergencies, such as process outages, critical alarms, or equipment failures, diagnose issues and take immediate corrective actions or perform manual interventions together with Manufacturing supervisor/delegate, to restore normal operations and prevent any potential safety or quality incidents.
• Collaborate with the production team to ensure the stability of production processes and the execution of operations.
• Identify opportunities for operational improvements and implement optimization strategies.
• Assist and guide Standard Users with system-related queries and issues.
• Provide support to manufacturing operations outside of regular office hours. Attend to urgent requests and ensure timely resolution of issues.
• Will work holidays and overtime as required
• May be required to adjust work schedule to meet production demands

Email: [email protected]

Whatsapp: 96503173

Telegram: @jesswongie

Jessie Wong Yuan Si

Personnel EA License No.: R2197171

Recruit Express Pte Ltd (EA Licence No.: 99C4599)

• Perform end user IT Support
• Perform troubleshooting for client platform related problems
• Support Windows OS, office software, and other Desktop Related Software & Hardware Respond promptly to incident,
• investigate & provide temporary &/or permanent resolution of incidents escalated
• Liaise with support vendors for maintenance, support or issues resolution
• Monitor the agreed service level, document & maintain the configuration of the systems Involve in client platform implementation/upgrade project
• Any ad-hoc duties assigned / required.

School of Infocomm (SOI) is is looking for a project engineer to play a key role in delivering full stack AI/ML solutions to its industry partners. Engaging industry partners to deliver innovative and practical solutions is crucial to RP’s mission as an educational institution and ensures its curriculum is updated and relevant.

This is an excellent opportunity for a full-stack developer to work with RP staff experienced in AI/ML to create AI/ML solutions that deliver critical business functions.

For more information from RP, please visit http://www.rp.edu.sg/careers or follow us on LinkedIn.

Job Description:

As a project engineer, you will work with academic staff and RP industry partners to design, develop, deploy and maintain AI/ML projects. You are expected to complete a project life cycle that starts with gathering business requirements, development of an AL/ML software library suite, and culminating in the deployment of prototype client applications that uses this AI/ML library to deliver its functionality.

• Participate in the full development life cycle of AI/ML projects, with a specialization in video and image recognition
• Design, develop, deploy and maintain robust, scalable AI/ML APIs
• Design, develop, deploy and maintain mobile and web applications that access AI/ML APIs
• Perform data exploration and data analysis to understand data, and design model architecture
• Optimize data systems and pipeline architecture. Design, build and deploy applications to extract data from a variety of sources and to perform feature engineering
• Deploy and integrate AI ​​models into back-end servers and cloud services for API access
• Identify and select AI/ML technologies to solve problems. Develop and test AI/ML models using these technologies
• Cooperate with other departments to effectively use internal/external big data
• Produce documentation to design, develop, test, deploy, sustain, and update AI/ML applications to ensure good governance and accountability

Job Description:

• Relevant qualification in Computer Science/Engineering preferably with a specialist certification in AI/ML OR Artificial Intelligence/Data Science
• 3-5 years relevant experience as a full stack developer or similar role
• Proficient in developing mobile web and mobile applications using multiple front-end languages (e.g. HTML/ CSS, JavaScript, XML, jQuery) and frameworks (e.g. React, Angular)
• Proficient in developing APIs and back-end services using back-end languages (e.g. Python, Java) and frameworks (e.g. Node.js, Flask)
• Proficient in storage and access of structured and non-structured data using SQL and non-SQL datastores (e.g. MySQL, MongoDB, Snowflake)
• Experience with deployment of application and services to cloud computing platforms (e.g. AWS, Azure)
• Experience in using OpenCV, Ultralytics, Media Pipe Pose, and other Pose Estimation technologies
• Familiar with Tensorflow, Tensorflowjs, Keras, Scikit-learn, PyTorch and other popular AI frameworks
• Enjoy sharing and presenting ideas
• Able to work independently

To succeed in this role, you need to be knowledgeable, independent, and flexible. As an educational institution, RP is vendor agnostic and delivers best-of-breed solutions to its industry partners across a spectrum of technologies. You are expected to be knowledgeable to recommend (and execute) technical practices that are affordable and fit-for-purpose.

You will enjoy working in an independent but accountable manner. There is ample space to explore creative solutions within the framework of project boundaries.

RP has a dynamic staff culture, being flexible and receptive to different opinions will contribute to your success as well. You will interact with project staff spanning IT, Health & Fitness and Logistics industries.

Backend Developer

Location: Ubi

Working Days: 5 Days Work Week

Working hours : Monday- Friday 9am -6pm

Salary : $4000~$6500 (Depends On Experience)

Job Description:

• Develop and maintain a highly scalable and distributed IT system.
• Write clear system documentation.
• Maintain a close communication with experts and teams from around the world to discuss the - project feasibility, assist in product testing and to provide updates on project progress.
• Regularly maintain and monitor software applications for error, health and performance improvement.
• Provide production level support to fix urgent issues and bugs.
• Research and suggest ideas to improve software application and process.

Requirement:

• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Computer Science/Information Technology or equivalent.
• Experienced in .NET Core framework preferably C# & web application technologies such as web api, HTML, CSS and etc & relational database and NOSQL database.
• Able to write high performance code to handle very high concurrent requests & highly optimized SQL queries to handle very high database requests.
• Knowledge in Kubernetes, Docker and microservices are an added advantage.
• Eager to research new methodologies and technologies.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Staff Software Engineer | Senior | Industrial Automation | C++, C# | Woodlands

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $6,000 to $12,000
Location: Woodlands

Job Responsibilities

• Design, develop, test, and debug robust and efficient industrial automation software using C++, C# & WPF.
• Utilize Windows API and libraries for interaction with hardware components.
• Program machine functionalities using motion control cards for precise movement control.
• Integrate with distributed I/O systems to gather sensor data and control actuators.
• Implement robust communication protocols for data exchange between software and hardware components.
• Leverage advanced threading techniques and synchronization mechanisms for optimal application performance.
• Employ advanced memory management practices, including memory mapped files, file mapping objects, and memory sections, to ensure efficient resource utilization.
• Utilize the C++ Standard Library and templates effectively for code optimization and reusability.
• Understand and utilize Windows objects like events and mutexes for thread synchronization and communication.
• (Optional) Develop user interfaces using frameworks like WPF or WinUI to provide a user friendly experience for monitoring and control (if applicable).
• Write well-documented, maintainable, and efficient code adhering to best practices.
• Collaborate with electrical engineers and mechanical engineers to understand system requirements and ensure software meets functional specifications.
• Participate in code reviews and provide constructive feedback to fellow developers.
• Stay up-to-date with the latest advancements in C++, industrial automation technologies, and relevant libraries.

Job Requirement:

• Bachelor’s degree in computer science, software engineering, or a related field
• Minimum 8 years of experience developing industrial automation software using C++, C# & WPF.
• Proven experience with programming motion control cards and distributed I/O systems.
• Strong understanding of Windows API development and memory management techniques.
• In-depth knowledge of the C++ Standard Library and its functionalities, including templates.
• Experience with Windows objects like events and mutexes.
• Familiarity with Windows GDI and GDI+ is a plus (for graphics-related tasks).
• Experience with Borland/Embarcadero C++ Builder VCL platforms is a strong plus.

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Location: Tanjong Penjuru
Working hours: Mon to Fri from 7:30am to 5pm
Salary: $3,500 - $4,000

Responsibilities:

• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with the HR Department and assure that employee grievances are addressed in a timely fashion.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.
• Maintain and ensure work safety and practice. Also continually improve safety records by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas
• Evaluate, train and maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Ensure on time submission of overtime record to HR Dept for computation of monthly salary
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in the hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Requirements:

• Min 5 years working experience in manufacturing environment.
• Able to supervise and lead the subordinates.
• Computer literate.
• Knowledge in ISO is an advantage.
• Diploma or Degree in Manufacturing / Electrical /Mechanical / Engineering discipline

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

No experience/Diploma in precision/mechanical/mechatronic/electrical/electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2600, after 3 months confirmation $2700

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368