• Equipment Maintenance and Troubleshooting: Oversee the maintenance, troubleshooting, and repair of container handling equipment such as cranes, straddle carriers, reach stackers, and forklifts to ensure continuous operational efficiency.
• Preventive Maintenance Scheduling: Develop and implement preventive maintenance programs to reduce downtime, enhance equipment lifespan, and optimize overall performance.
• Equipment Calibration and Upgrades: Ensure the accurate calibration of equipment systems and coordinate upgrades or retrofitting to meet technological advancements and compliance standards.
• Operational Support: Provide technical support to operations teams, assisting in diagnosing and resolving equipment-related issues promptly to minimize operational disruptions
• Safety Compliance: Ensure all equipment adheres to safety regulations and operational standards, conducting regular safety inspections and ensuring that equipment is used safely and efficiently.
• Equipment Performance Monitoring: Use diagnostic tools and systems to continuously monitor the performance of port equipment, analyzing data to identify trends, optimize performance, and prevent equipment failure.
• Budget and Cost Management: Assist in the budgeting process for equipment-related expenditures, such as maintenance costs, spare parts, and repairs, and work to control costs while maintaining operational readiness.
• Vendor and Supplier Management: Liaise with equipment manufacturers, service providers, and suppliers to procure spare parts, arrange for repairs, or source new equipment, ensuring quality and cost-effectiveness.
• Training and Development: Train and mentor port staff and technicians on proper equipment operation, maintenance procedures, and safety protocols to enhance team competence and reduce errors.
• Root Cause Analysis and Reporting: Conduct root cause analysis of equipment failures or inefficiencies and provide detailed reports with recommendations for improvements or corrective actions.

Requirements:

• NITEC/Higher Nitec/Diploma in a technical discipline
• Those without the stipulated qualifications but with related technical experience are also welcome to apply
• Willing to work outdoors, at heights and on weekends

Wong Li Qi (Jolin)

R2096313

• Service Recovery Support: Assist in the identification, diagnosis, and recovery of faulty equipment and machinery, ensuring timely restoration of service to meet customer requirements and operational goals.
• Troubleshooting & Diagnostics: Support senior engineers in troubleshooting and diagnosing mechanical, electrical, or software-related issues in equipment and machinery, using industry-standard tools and techniques.
• Preventive Maintenance: Assist in the implementation of preventive maintenance schedules to reduce equipment downtime and prevent future failures, ensuring maximum operational efficiency.
• Repair & Refurbishment: Help in carrying out repairs and refurbishments of malfunctioning equipment, ensuring repairs are made in compliance with safety standards, manufacturer guidelines, and company procedures.
• Technical Documentation: Maintain accurate records of service activities, including work performed, parts replaced, and equipment status updates. Assist in generating technical reports for service recovery actions and outcomes.
• Parts Inventory Management: Support in managing spare parts and components for equipment recovery. Assist in tracking inventory levels and ensure timely replenishment to avoid delays in repair processes.
• Customer Communication: Assist in communicating with clients regarding service recovery updates, equipment status, and timelines for repairs or maintenance, ensuring customer satisfaction.
• Quality Assurance: Help ensure that all equipment recovery actions meet company and industry standards for quality, safety, and reliability. Support post-repair testing and inspections to confirm equipment functionality.
• Training & Development: Participate in internal training programs to improve technical knowledge and stay up-to-date with the latest developments in equipment technology and repair techniques.
• Root Cause Analysis & Reporting: Assist in conducting root cause analysis for equipment failures and contribute to the development of solutions to improve long-term equipment reliability and performance.

Requirements

• Minimum Nitec/Higher Nitec or Polytechnic Diploma in any technical disciplin
• Willing to work outdoors and at heights
• Able to work 8 hours or 12 hours rotating shift

Wong Li Qi (Jolin)

R2096313

The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Job Description:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• Become the technical Expert for the respective machine specialization.
• Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Se expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Materials / Material Sciences Engineering
• Min 5 years of relevant work experience in Photo Equipment (Track) in semiconductor industry
• Excellent communication, interpersonal and leadership skills
• Strong analytical skill and able to work under pressure in fast pace environment
• Proficient with MS Power Point, Excel, Excel VBA, Power BI

The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Job Description:

• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness..
• Able to coach Engineers in performing hardware trouble-shooting for daily operations
• Establish Preventive Maintenance (PM) plans for all implant equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Initiate meeting with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives and analyze low yield and WAT issues
• Establish stock levels of essential spare parts and consumables to support equipment maintenance based on forecasted manufacturing volume. Liaise with vendors to minimize / eliminate over-stock or under-stock
• Manage new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production
• Develop continuous improvement and Implement equipment improvement projects to improve equipment efficiency, cost reduction and reliability of equipment
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Set targets, goals, and projects for the section to minimize wafer scrap, equipment cost per wafer, optimize equipment capability and utilization to meet operational needs
• Provide feedback / training to AEs and TAs on their troubleshooting skills, equipment knowledge, decision making, risks assessment
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers
• Self audit and update specifications to meet TS16949 Quality Standard requirements
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager. Help the AE or Engineer on their career path development
• Provide long term solutions to address daily issues. Resolve department hardware chronicle issues.
• Create and maintain implant operation SOP and PM OI
• Develop continuous improvement to enhance equipment reliability and cost of ownership, Able to plan implant cost budget

Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 5 years of relevant work experience in Diffusion Implant Equipment
• Familiar with all the implant tools: Varian E500, VIISTA900, Axcelis GSD, Axcelis HE/VHE. AMAT XR80.
• An excellent team player with good interpersonal, communication and written skills
• Strong leadership capability to lead and provide guidance to juniors
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Service Technician

• Salary: $2000 - $3800 + OT ( depend of experience)
• Location: Gul Crescent [Company Transport @ Chinese Garden, Lakeside, Boon Lay]
• Working Hours: 8.15am - 5.45pm
• Working Days: 5 Days [Monday - Friday]

Requirements:

• Minimum Professional Certificate or NiTEC in Electrical & Electronic Engineering / Electrical Engineering
• Experience in repair of forklifts, automobiles, heavy industrial equipment, and knowledge in engines, motors and electrical would be relevant and useful.
• Understand engineering drawing and schematic layout are essential
• Possess Class 3 driving license

Job Description:

• Responsible for outdoor and indoor repair work of all cleaning products.
• Mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair.
• Work closely with service technicians for problem solving and coordinating jobs between field service and workshop repairs
• Where there is no outdoor repair, you are required to work within the Company workshop

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Responsibilities

• Diagnose and solve technical problems on semiconductor machinery and systems, such as computer setups, advanced software, or networked/wireless systems.
• Carry out on-site installations, continuous improvement initiatives, parts overhauls, preventative maintenance, equipment modifications, and repair work.
• Act as the main point of contact between the company and the customer for both administrative and technical matters related to assigned projects.
• Organize logistics and coordinate with customers on equipment-related issues.
• Address customer complaints, offering timely solutions to resolve their issues.
• Track product performance, providing regular updates and feedback on customer service requests.
• Report recurring customer concerns to management to help prevent future issues.

Requirements:

• Minimum of 2 years of related experience in Semiconductor Industry
• Possess at least a Diploma/Degree in Electrical or Electronic Engineering
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXV54V53

Location: Jurong East

Working hours - Mon – Fri, 8.30am – 5.30pm

Requirements

• Handling of equipment for military and security (eg Chemical Detector, Radiation detector, Biological Detection Systems for Military , Acoustic Hailing Equipment / System etc)
• IT software installation and configuration.
• Handling enquiries on products such as post-sales delivery of equipment
• Carry out maintenance,diagnostic analysis, trouble shooting and repair work for equipment.

Requirements

• Higher Nitec / Diploma in Electrical & Electronics Engineering with min 5 years relevant experience
• Experience in customer relations.
• Able to do Stand-by duty if required

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Job Scope:

• Design and develop semiconductor manufacturing equipment and tools
• Collaborate with engineering teams to refine equipment specifications and improve performance
• Oversee the production process, ensuring quality control and adherence to industry standards
• Conduct testing and validation of equipment to ensure reliability and efficiency
• Manage supply chain logistics for materials and components needed in production
• Provide technical support and troubleshooting for equipment during installation and operation
• Develop and maintain documentation for equipment specifications, user manuals, and maintenance procedures
• Stay updated on industry trends and advancements in semiconductor technology
• Work closely with clients to customize equipment solutions to meet specific needs
• Ensure compliance with safety regulations and environmental standards throughout the manufacturing process

Requirements:

• Degree or Diploma in an engineering discipline with 1-3 years of experience
• Knowledge of vision/optical inspection systems is required
• Experience in semiconductor device manufacturing processes and quality control
• Familiarity with semiconductor optical inspection equipment is beneficial
• Experience in programming languages (C++, C#, or Python) is a plus
• Ability to troubleshoot electronics and PC hardware systems
• Knowledge of statistical data analysis is a plus
• Willingness to travel as required

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

We are looking for an experienced Maintenance Technician to join our team and ensure the proper functioning of cremation and filtration equipment. This role involves regular maintenance, overhauls, and troubleshooting to support smooth plant operations.

Key Responsibilities:

• Perform routine maintenance and troubleshooting on cremators and filtration equipment.
• Develop and execute maintenance and overhaul plans.
• Manage stock levels and prepare specifications for purchasing spare parts.
• Ensure safety procedures are followed during all maintenance activities.
• Assist with plant operations and cleaning as needed.
• Provide reports and collaborate with contractors and internal teams.

Job Requirements:

• Minimum ITE qualification.
• At least 2 years of supervisory experience in plant equipment maintenance.
• Might required to work in shifts, including weekends and public holidays.
• Strong safety awareness and troubleshooting skills.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to contact you about potential opportunities and delete personal data not required at this stage. To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Koh Shir Ley - R1327657
ScienTec Consulting Pte Ltd – 11C5781

• Global leader in the Semiconductor Industry.
• Exposure to industrial trends and technology.

About Our Client

The client manufactures advanced semiconductor solutions that power a wide range of applications, from data centers and mobile devices to automotive and industrial systems. With a strong focus on research and development, the client drives innovation in cutting-edge technologies, including artificial intelligence, 5G, and next-generation computing. The company is committed to delivering high-performance, energy-efficient solutions while maintaining a focus on sustainability and corporate responsibility.

Job Description

Responsibilities:

• Install and evaluate new equipment and/or CIP hardware to enable the early adoption of technologies for current and next-generation 3D NAND nodes.
• Partner with Fab layout, facilities, and cross-functional teams to ensure smooth and timely installation and operation of equipment.
• Work with the process development team to quantify the benefits of equipment and hardware and optimize existing tools to meet productivity requirements.
• Collaborate with global R&D teams on technology choices and translate future technology needs into actionable equipment requirements.
• Identify disruptive equipment early and propose viable evaluation paths.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead teams, suppliers, or cross-site projects to achieve equipment maturity, cost-effectiveness, and productivity enhancements.
• Serve as a technical advisor, provide recommendations to senior management, and lead innovation initiatives through patents or technical papers.
• Identify and mitigate safety hazards; strictly adhere to safety procedures, including lockout, chemical safety, and ergonomics.

The Successful Applicant

Requirements:

• PhD or a at least of 3 years of experience in the semiconductor industry in equipment engineering.
• Strong understanding of equipment operations, troubleshooting, and tool installation processes.
• Experience with R&D equipment transfer and hardware optimization is a plus.
• Excellent communication and collaboration skills with the ability to work with global teams.
• Self-motivated and adaptable to a fast-paced, dynamic work environment with flexibility for extended hours when needed.
• Strong project management skills, with the ability to prioritize and handle multiple tasks efficiently.
• Commitment to safe and compliant behavior.

What's on Offer

The Client offers an exciting opportunity for candidates to work on cutting-edge semiconductor technologies and next-generation innovations, in a fast-paced and collaborative environment. Joining the client means being part of a global team driving technological advancements with access to world-class training, career development opportunities, and the chance to contribute to patents and technical innovations. The client provides competitive compensation packages, comprehensive health and wellness benefits, and flexible working arrangements to support work-life balance. With a strong focus on sustainability, diversity, and inclusion, the client fosters a culture of creativity and excellence, empowering employees to make a meaningful impact in the tech industry and beyond.

Contact

Timothy Huang (Lic No: R1980928/ EA no: 18S9099)

Quote job ref

JN-122024-6626058

Phone number

+65 6416 9863

Michael Page International Pte Ltd | Registration No. 199804751N

Job Overview

Do you want to further develop your analytical mind to pinpoint core issue and earn the satisfaction of resolving it ? Do you like working with fellow team members to improve your job routine and environment ? Do you crave job security and yet be at the frontier of technology?

Join us at UMC (SG), a leading global semiconductor foundry company manufacturing microchips for use in the present and for the future. In course of your work, you will learn internationally acclaimed analytical skills and techniques to apply in your work and personal life. Have the chance to work with engineers from other fields and process to resolve and improve current procedures.Seize the opportunity to take part at senior level in Quality improvement competition host in Taiwan national level and earn accolades as an elite engineer with awards and certification. Be recognized as an engineer of high calibre in Singapore and internationally.

Responsibilities

1. Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality and lot handling
2. Maintain Equipment capability for production and meet production demand
3. Engage with Production line and Process Engineers to balance tool availability for production, troubleshooting and scheduled maintenance
4. Engage in Equipment troubleshooting and production quality improvement.
5. Evaluation of new equipment/materials and retrofits of Equipment for better efficiency / production quality

Qualifications

1. Possess at least a Bachelor's Degree in engineering in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering ,Physics, Automation, Aerospace Engineering
2. Able to think critically with strong analytical skills
3. Possess good communication skills and time management skills
4. Prior leadership or competition experience in school activities will be an advantage
5. Must be willing to commit shift work
6. At least 2 years with relevant working experience in semiconductor industry foundry

Job Descriptions:

• Lead and manage the R&D department, developing and implementing effective technical strategies.
• Provide technical guidance for product development, support, and certification.
• Ensure compliance with relevant airworthiness requirements and secure approvals from authorities (e.g., CAAS, EASA, FAA) and aircraft manufacturers.
• Drive product management initiatives to enhance customer satisfaction, increase productivity, improve product quality, and reduce manufacturing costs.
• Serve as the authorized design signatory for certification/design data with major aircraft manufacturers.
• Collaborate with cross-functional teams to identify business opportunities and develop innovative solutions.
• Promote a culture of innovation that encourages experimentation and calculated risk-taking.

Job Requirements:

• Bachelor’s or Master’s degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or a related field.
• 6-years or above of experience in aviation R&D, product development, or engineering management.
• Proven experience in leading technical teams and managing complex projects.
• Comprehensive knowledge of aviation regulations (e.g., FAR, EASA, CAAS).
• Familiarity with certification processes and design data management.
• Understanding of product lifecycle management (PLM) principles.

If you are interested in this opportunity, submit your application now to [email protected] find out more about this position. Thank you.

Chen Hsiu Wen (Winnie) | Personal Reg No: R1980765
Manpower Staffing Services (S) Pte Ltd | EA License No: 02C3423

[Order Number: 670864-R]

Responsibilities

• Install, troubleshoot, and maintain equipment or systems at client sites, ensuring proper functioning and addressing any technical issues that arise.
• Provide technical support and training to clients, ensuring they are equipped to operate and maintain systems independently.
• Conduct regular site inspections, collect data, and prepare detailed reports on system performance, maintenance needs, and any recommendations for improvements or upgrades.

Requirements

• No experience candidates are welcome to apply.
• Comfortable working in a cleanroom environment and on a 24/7 standby rotation shift schedule.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Tan Sin Rou
EA Personnel Registration Number: R22106434
EA License no.: 07C5771

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Product Engineer (Automation/Electromechanical Equipment)
• Working Location: East Area (Nearest MRT: Bendemeer)
• Working Hours: 5 days Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Set up and troubleshoot semiconductor equipment.
• Document engineering enhancements for continuous improvement and future reference.
• Develop procedures for the assembly, inspection, and testing of equipment.
• Collaborate with the engineering and software teams to enhance system designs.
• Work alongside cross-functional engineering teams to troubleshoot and resolve system issues.

APPLY NOW!!!

• Min. Diploma in Mechanical or Mechatronics Engineering.
• At least 2 years of experience in setting up and managing automation equipment.
• Possesses a thorough understanding of electromechanical systems.
• Willingness to travel internationally for field support as needed.
• Availability to work overtime when required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69727 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

• Increase revenue and market growth of general laboratory products and solutions in the assigned market segment.
• Handle enquiries from customers and prospects, providing excellent pre-sales and after-sales support.
• Build and maintain positive relationships with existing and potential customers, along with key opinion leaders.
• Monitor market trends and evaluate customer requirements.

Requirements:

• Degree in Marketing or equivalent.
• At least 4 years of sales experience in Laboratory Equipment/Consumables.
• Strong understanding of scientific and general laboratory consumables.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Benefits

• On Job Training, fresh grad are welcome
• Good progresssion X Stable company

Responsibilities

• Carry out Preventive & Corrective Maintenance in accordance with the Standard Operating Procedures and Work Instructions.
• Co-ordination of site works with sub-contractors/customers
• Provide project site & overseas on-site support services for systems testing & commissioning and clients' training
• Attend to any Emergency Service call during & after office hours & PH for weekly standby duty on a rotation basis

Requirements

• Fresh / Entry-level / Relevant Experience for NTC2 / ITE / Diploma in Electronics or IT Engineering background. Certificate for Electronics / IT Engineering will be required upon interview.
• Experience in site coordination, PM and installation works.
• Experience in the Installation and commissioning of devices for Electronic Low Voltage (ELV) systems (examples: Intercom, FDAS, ACS, BMS, BGM/PA, Nurse Call, CCTV, Alarm System, etc.)
• Added advantage: Experienced in Service and Facility Maintenance for hospitals, nursing homes and industrial sites.

Additional Information

• 5 working days: Monday – Friday 8.30am – 5.30pm
• Overtime to be required
• Standby 24/7 Duty on weekly Schedule

► Semiconductor and Electronics industry.

► Work Location: Ang Mo Kio

► Working hours: 8.30am to 5.30pm, Monday to Fridays

► AWS + VB

Our Client is a well-established company in Singapore to serve the semiconductor and electronics industries both local and globally.

Responsibilities:

· Software Design, Development and Maintenance (Equipment PC-based Programming)

· System Implementation, Testing, Debugging and Documentation

· Analyze existing software and identify areas for modification and improvement

· Troubleshooting at customer’s site

Requirements:

· Degree in relevant discipline with 3 years of experience in software development in the automation industry

· Strong in equipment PC-based programming skills

· Experience in motion control and process control

· Experience in Vision System software development is an advantage

· Knowledge in SECS/GEM standards and implementation is preferred

· Strong troubleshooting and analytical skills

· Willingness to travel for business on short notice when necessary.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email to submit your resume.

Kindly send your resume in MS Word format to:

[email protected]

We regret only shortlisted candidates will be notified.

By submitting any application or resume to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Chew Hong Huang

EA Personnel Reg. No.: R24124128

Position Overview:

We are currently recruiting for an Equipment Engineer role with a global leader in the consumer goods industry. This opportunity is ideal for a hands-on engineer who excels at optimizing equipment performance, driving cost-effective maintenance strategies, and leading technical teams to achieve operational excellence.

This role involves leading technical teams to maximize equipment uptime while meeting customer expectations and business objectives. You will engage in cross-functional collaboration, implement productivity improvement projects, and manage a best-in-class maintenance program.

Key Responsibilities:

• Ensure manufacturing equipment and processes meet performance targets through effective preventive maintenance and improvement initiatives.
• Troubleshoot and resolve equipment issues promptly and cost-effectively.
• Lead and support productivity improvement projects, including CAPEX and global/local initiatives.
• Manage variable expenses while delivering safety, quality, and productivity goals.
• Drive continuous improvement efforts to enhance equipment performance.
• Engage and develop team members through coaching and training.
• Maintain an adequate inventory of spare parts and ensure preventive maintenance is executed as per program requirements.
• Collaborate with cross-functional teams to support improvement activities and achieve business goals.

What We're Looking For:

• Min. Degree in Mechanical Engineering or equivalent field.
• Strong foundation in mechanical engineering and excellent troubleshooting skills.
• Knowledge of predictive maintenance techniques and best practices.
• Proven ability to lead and develop technical teams.
• Experience in implementing and maintaining high-performance maintenance programs.
• Collaborative mindset to work with cross-functional teams for continuous improvement.

Other key details:

• Working hours: Mon to Fri, 8am - 530pm
• Location: West of Singapore (Company transport from Jurong East)
• Bonus: AWS + Attractive Performance Bonus

To apply online please use the 'apply' function, with your latest resume attached.

(EA: 94C3609/R1442042)

Assistant Sales & Marketing Manager

• Location: Tuas
• Salary: $4000 - $5000 + Commission + Mobile + Meal
• Working days: Monday - Friday
• Working hours: 8:30am – 4.30pm

Requirement

• Relevant Experiences, preferably in the Heavy Equipment Industry
• Valid Class 3 License & Possess own vehicle

Responsibilities

Sales

• Customer Relationship Management: Build and maintain strong relationships with customers to foster long-term loyalty and repeat business.
• Sales Performance Analysis: Monitor sales performance, identify trends, and take corrective action as needed.
• Sales Forecasting: Prepare accurate sales forecasts to support business planning and resource allocation.
• New Business Development: Identify and pursue new business opportunities to expand the company's customer base and revenue streams.
• Internal Coordination: Ensure agreement with customers are executed by the team.

Marketing

• Market Research: Conduct market research to identify new business opportunities, analyze competitor activities, and understand customer needs.
• Marketing Strategy Development: Develop and execute comprehensive marketing strategies to increase brand awareness, generate leads, and drive customer engagement.
• Brand Management: Protect and enhance the company's brand image through consistent messaging and marketing initiatives.
• Digital Marketing: Leverage digital marketing channels (e.g., websites, social media, SEO) to reach target audiences and drive online sales.
• Event Management: Organize and participate in industry events, trade shows, and conferences to promote the company and its products.
• Other ad-hoc duties as and when assigned.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Responsibilities:

• Sustain equipment KPI and make continuous improvements to enhance performance with cost maintenance.
• Monitor and control equipment performance indices. Optimize PM procedures to make them more effective and efficient.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Coordinate new equipment start-up to support production, from facilities hook up, and vendor starts up, to acceptance of equipment for production.
• Monitor and analyze SPC, JMP for data collection.

Requirements:

• Degree in Mechanical / Mechatronics / E&E Engineering.
• Minimum 3 years of working experience in troubleshooting/maintenance of tools in Semiconductor industry.
• Proficient with SPC, FMEA, DOE, etc.
• Cleanroom experience.
• Good verbal and written communication skills and team player.

We regret that only shortlisted candidates will be notified.

To apply, please click "Apply Now" or visit www.gmprecruit.com and search for job reference: 20751

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

• Well Established Company
• Basic $3500 - $4000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working day: Monday to Friday
• Working hours: 8.15am to 5.15pm

Job Responsibilities:

• Oversee outdoor and indoor repair tasks for all cleaning equipment
  Perform mechanical preventive maintenance, identify mechanical issues, replace spare parts, and carry out repairs
  Collaborate closely with service technicians to solve problems and coordinate tasks between field service and workshop repairs
• Any ad hoc duties as assigned

Job Requirements:

• Possess at least a Professional Certificate/ Nitec in any Electrical & Electronic or Mechatronics Engineering or relevant qualification
• Possess experience in repair of forklifts, automobiles, heavy industrial equipment, and knowledge in engines, motors and electrical would an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• Provide technical support to clients' sites and achieve the service specification requirements.
• Perform on-site installation, parts' overhaul, preventive maintenance, modifications and repair works on equipment.
• Serves as company point of contact with customer on administrative and technical matters.
• Responds to customers’ complaints, provides time to solutions to resolve customers’ issues and provide the documentation/reports.
• Monitors the performance of the product, provide regular update report and feedback on customer’s service requests.

Requirements:

• Diploma/Degree in Electrical / Mechatronics Engineering with 2 years of experience in servicing/maintaining Semiconductor equipments.
• Experience in a cleanroom environment.
• Good analytical skills, problem-solving skills, and communication skills.
• Travel to customer sites, performing OT / Standby duty as the nature of the scopes.

To apply, please click "Apply Now" or visit www.gmprecruit.com and search for job reference: 22113

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

Responsibilities

• Plan, develop and implement new equipment mainternance SOP for polishing and cleaning processes.
• Responsible for new equipment set up, installation, and qualification.
• Process improvement and optimization to enhance quality, cost reduction, and productivity.
• Maintain the process and equipment documentation including operating, maintenance, and work procedure.
• Training of technicians on standard procedure and work instruction.

Requirements

• Degree in Mechanical / Mechatronics / Electrica & Electronics Engineering.
• With 2-3 years of working experience in polishing and cleaning processes is a must.
• Proficient in DOE, FMEA, and SPC.
• Possess good communication skills and able to work independently with minimal supervision
• Able to work in a cleanroom environment.

To apply, please click "Apply Now" or visit www.gmprecruit.com and search for job reference: 22111

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

Assistant Sales & Marketing Manager

Location: Tuas

Salary: $4000 - $5000 + Commission + Mobile + Meal

Working days: Monday - Friday

Working hours: 8:30am – 4.30pm

This role is responsible for overseeing and driving the company's sales and marketing efforts to ensure consistent revenue growth and market leadership.

Responsibilities

Sales

• Customer Relationship Management: Build and maintain strong relationships with customers to foster long-term loyalty and repeat business.
• Sales Performance Analysis: Monitor sales performance, identify trends, and take corrective action as needed.
• Sales Forecasting: Prepare accurate sales forecasts to support business planning and resource allocation.
• New Business Development: Identify and pursue new business opportunities to expand the company's customer base and revenue streams.
• Internal Coordination: Ensure agreement with customers are executed by the team.

Marketing

• Market Research: Conduct market research to identify new business opportunities, analyze competitor activities, and understand customer needs.
• Marketing Strategy Development: Develop and execute comprehensive marketing strategies to increase brand awareness, generate leads, and drive customer engagement.
• Brand Management: Protect and enhance the company's brand image through consistent messaging and marketing initiatives.
• Digital Marketing: Leverage digital marketing channels (e.g., websites, social media, SEO) to reach target audiences and drive online sales.
• Event Management: Organize and participate in industry events, trade shows, and conferences to promote the company and its products.
• Other ad-hoc duties as and when assigned.

Requirement

• Relevant Experiences, preferably in the Heavy Equipment Industry
• Valid Class 3 License & Possess own vehicle

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

• Position : Sales Executive (Heavy Equipment/Construction) - Must Own Car
• Location : Gul Circle
• Working hours : Monday - Friday 8am to 5:15pm
• Salary (commensurate with experience) : Up to $3800 Basic + $1000 Car Allowances + Commission + Performance Bonus + 14 Days Annual Leave (Up to 21)
• Duration : Permanent
• Industry : Material Handling Equipment Supplier

Main Responsibilities:

• Ensure profitable growth of our Agreement Base by selling new Service Agreements, renewing existing Agreements with added value/scope, and ensuring customer retention via active relationship management.
• The Sale of new and renewal Service Agreements to potential customers
• Maintain and develop business relationships with customers to ensure profitable growth and customer retention
• Prepare quotations and tenders and negotiate their terms according to company Contractual Instructions and grant approvals according to Delegation of Authority
• Follow good CRM practices on all Sales Case and Activity monitoring and handling
• Responsible for proper execution of Business Reviews for the related Agreements, utilizing the online customer portal
• Responsible for proper handover of all agreement details to Administrators/Planners and coordinate any needed changes during active agreement period
• Actively promote other non-agreement Services and Products, focusing on asset Modernizations and Spare Part needs
• Assist in creating team level sales forecasts, strategies, Annual Plans and Long-Term Plans
• Other ad-hoc activities assigned

Requirements:

• Minimum Diploma in Sales, Engineering, or related field
• 1-2 year/s of Engineering or Sales experience
• Experience working with Siebel CRM or similar tools
• Posses own car
• Bilingual in English and Mandarin to liaise with associates who can only speak mandarin.

Email to: [email protected] or call me at: 6398 5682 for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Diana Okta Tio

Deputy Consulting Director (APAC)

Reg no.: R2094678

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.