Job Responsibilities

• Perform preventive maintenance activities with the objective of ensuring equipment capabilities are stabilized and optimized through continuous improvement and cost reduction within the limits of cost permitted and department policies and objectives.
• React to error/alarm messages of manufacturing equipment.
• Perform equipment health check and troubleshooting.
• Prepare the procedure/OCAP or report regarding to machine issues.
• Identify and address potential areas for improvement and optimize tool availability, cycle time, utilization, and cost.
• Actively participate in continuous improvement project, to upkeep line equipment.
• Work as the proxy tool owner to manage the tool performance and meet the KPI requirement.
• Understand and follow all health, safety, and environmental procedures and requirements.
• Support on safety, ISO & 5S audit.

Spare Parts

• Assist in the management and upkeep of equipment spares and inventory system.

Training

• Assist Engineers in staff training, such as maintenance training, prepare training materials, cross training of zone members, updating and reporting.

Safety, Housekeeping, Discipline & Others

• Perform the activities (5S, workplace safety and occupational hazards) to ensure conformance of safety instructions and promote good housekeeping, organization, and manufacturing practices.
• Ensure good housekeeping, plant work discipline, ESD and safety awareness at all times.
• Execute Ad Hoc task instructed by supervisor / manager.

Others

• Carry out effective planning for corrective and preventive measures to maintain high equipment reliability and process stability with minimal resource requirements.

Job Requirements

• Diploma/Certificate in Electrical/Electronics/Mechanical/Mechatronics Engineering or equivalent
• At least 3-year of work experience in the semiconductor industry
• Able to perform swing shift (work in weekend) schedule, including working in a cleanroom environment.
• Able to work well with minimal supervision and ability to prioritize tasks and follow specific procedures.
• Strong technical skills and knowledge of semiconductor process tools
• Good communication skills and follow up with tool vendor for issue troubleshooting and solution.
• Experienced in repair and maintain a variety of Lithography exposure, coater, developer, bonder, scrubber tools.
• Able to use MS office.
• Able to read and write PLC (Programming Logic Control) will be an added advantage.
• Able to read FDC charts and use Power Bi will be an added advantage.
• Strong teamwork, able to work well with a global team and other duties as assigned.

Job Description

• Industry/Organization Type: Heavy Equipment/Parts
• Position Title: Assistant Sales & Marketing Manager (Heavy Equipment)
• Working Location: Tuas
• Working Hours: Monday – Friday, 8.15 pm – 5.15 pm
• Salary Package: Up to $5,000 + $1,500 Transportation Allowance + Commission + AWS + Meal Allowance
• Duration: Permanent

Key Responsibilities

• Build and maintain strong relationships with customers to ensure repeat business and customer loyalty.
• Continuously monitor sales performance, analyze trends, and develop strategies to address any gaps.
• Develop accurate sales forecasts to guide business planning and ensure strategic resource allocation.
• Identify and seize new business opportunities to expand market share and revenue streams.
• Work closely with internal teams to ensure that customer agreements are executed smoothly.
• Conduct in-depth market research to identify potential business opportunities, track competitor activities, and assess customer needs.
• Develop and implement marketing strategies that elevate brand awareness, drive lead generation, and enhance customer engagement.
• Ensure consistent messaging and maintain the brand's integrity across all marketing channels.
• Leverage digital marketing platforms—such as websites, social media, and SEO—to engage targeted audiences and boost online sales.
• Coordinate and participate in industry events, trade shows, and conferences to promote the company's portfolio of products.
• Perform additional responsibilities as required to support business needs.

APPLY NOW!!!

• With at least 3 years of Sales & Marketing experience.
• Good understanding of the heavy equipment sector, its market trends, and regulations.
• Comprehensive understanding of marketing principles such as brand management, market research, and digital marketing.
• Knowledgeable in digital marketing tools and platforms.
• Proficient in Microsoft Office (Word, Excel, PowerPoint).
• Well-versed in the Singapore market dynamics including economic conditions and competitive landscape.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69835 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/Organization Type: Heavy Equipment/Parts
• Position Title: Assistant Sales & Marketing Manager (Heavy Equipment)
• Working Location: Tuas
• Working Hours: Monday – Friday, 8.15 pm – 5.15 pm
• Salary Package: Up to $5,000 + $1,500 Transportation Allowance + Commission + AWS + Meal Allowance
• Duration: Permanent

Key Responsibilities

• Build and maintain strong relationships with customers to ensure repeat business and customer loyalty.
• Continuously monitor sales performance, analyze trends, and develop strategies to address any gaps.
• Develop accurate sales forecasts to guide business planning and ensure strategic resource allocation.
• Identify and seize new business opportunities to expand market share and revenue streams.
• Work closely with internal teams to ensure that customer agreements are executed smoothly.
• Conduct in-depth market research to identify potential business opportunities, track competitor activities, and assess customer needs.
• Develop and implement marketing strategies that elevate brand awareness, drive lead generation, and enhance customer engagement.
• Ensure consistent messaging and maintain the brand's integrity across all marketing channels.
• Leverage digital marketing platforms—such as websites, social media, and SEO—to engage targeted audiences and boost online sales.
• Coordinate and participate in industry events, trade shows, and conferences to promote the company's portfolio of products.
• Perform additional responsibilities as required to support business needs.

APPLY NOW!!!

• With at least 3 years of Sales & Marketing experience.
• Good understanding of the heavy equipment sector, its market trends, and regulations.
• Comprehensive understanding of marketing principles such as brand management, market research, and digital marketing.
• Knowledgeable in digital marketing tools and platforms.
• Proficient in Microsoft Office (Word, Excel, PowerPoint).
• Well-versed in the Singapore market dynamics including economic conditions and competitive landscape.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69835 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Location: Jurong East

Working hours - Mon – Fri, 8.30am – 5.30pm

Requirements

• Handling of equipment for military and security (eg Chemical Detector, Radiation detector, Biological Detection Systems for Military , Acoustic Hailing Equipment / System etc)
• IT software installation and configuration.
• Handling enquiries on products such as post-sales delivery of equipment
• Carry out maintenance,diagnostic analysis, trouble shooting and repair work for equipment.

Requirements

• Higher Nitec / Diploma in Electrical & Electronics Engineering with min 5 years relevant experience
• Experience in customer relations.
• Able to do Stand-by duty if required

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible and focus on improving tool performance and availability, in charge of maintenance, diagnosing failures and implementing effective solutions to meet uptime and cycle time requirements in the Wet Etch module.

Key Responsibilities

• Maintain equipment performance in cleanroom environment for quality production.
• Handle on-duty tasks and conduct fundamental alarm troubleshooting; identify root cause and problem-solve critical equipment issues with urgency
• Install and qualify new tool sets on schedule to increase capacity promptly
• Continually improve tool uptime availability, drive defect reduction and enhance hardware capability
• Develop defense and monitoring system to prevent equipment failure or performance lost.
• Analyze complex data sets and derive actionable insights to optimize equipment parameters and controls
• Actively collaborate with equipment suppliers and partners to identify tool deficiencies; develop, evaluate, and validate corrective and preventive solutions

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 2 years of experience as a Wet Etch equipment engineer, possessing in-depth knowledge. Experience working in a 12” fab would be advantageous
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Job Highlights

• Permanent Position / MNC/ Near Woodlands MRT/ Urgent Hiring!!
• Afternoon Shift (Monday to Friday: 3pm – 11pm, Sat: 1pm - & 7pm)
• Afternoon Shift allowance
• AWS bonus, Annual Leave,Medical Benefit, Dental Benefit

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities

• Responsible for all automation related activities of the product.
• Responsible for the Maintenance and Repair of production automated machines.
• Optimise automation parameters and meeting specific cycle time for existing and new products.
• To provide timely support to ensure efficiency of production machines & equipments are met.
• To work with respective department on product quality issues.
• Initiate containment plan and implement effective long term plan on quality related issues
• Attend to all daily quality and process related issues.
• Execute process validation for new and existing products with tooling and quality personnel.
• Continuous Improvement to enhance quality and productivity through automated processes
• Perform internal quality system audit.
• Train and assess production staff on processes and product where applicable.
• Attend routine production and quality meetings
• Execute engineering change notice from customer.
• Analyze quality data collected periodically and provide recommendation to management for improvement

Requirements

• Degree/Diploma in Engineering-related discipline, preferably Mechatronics
• Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA
• Results-oriented, meticulous and a self-motivated team player

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Ryan Tan (EA Reg. no.: R23116422)

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

[email protected] I www.rightrecruit.com.sg

You will work in the Coating Department and responsible mainly for equipment repair, maintenance and upgrading of equipment in optics coating.

RESPONSIBILITIES:

1. Responsible for 24-hour equipment uptime & efficiency.

2. Responsible for the troubleshooting, hands on repair and maintenance, and upgrading of equipment.

3. Assist in sourcing, qualification & installation of new equipment.

4. Preventive maintenance (PM) program to ensure good equipment running condition, minimizing operational downtime & yield losses.

5. Handle equipment such as high vacuum PVD systems, ultrasonic cleaning lines, robotic pick and place, gas delivery systems, acid-stripping benches and sandblaster.

6. Involve in projects to improve equipment efficiency and product yields, using FMEA & SPC techniques and other data analytical tools.

SKILLS & QUALIFICATIONS:

• At least 3 years of relevant work experience for NITEC or Technical Certificate.
• No experience is required for Diploma or Degree holder.
• Must pass in electrical subject.
• Normal color vision is required for electrical items checking
• Capable in simple tool, jig, fixture design.
• Experience in High Vacuum and Thin-film coating is preferred.
• Knowledge of instrumentation control, Auto CAD & high vacuum technology, and robotic systems are a plus.

Working Conditions:

1. Must commit to work permanent 12-hour rotating shifts from timing 8 to 8 including weekends and public holidays.

2. Initial start work period will be in morning shift for on -the -job training.

3. Work in Clean aircon room with normal dust coat attire.

4. Wear a tight-fit respirator when needed. Per safety rule, require clean shave facial hair

5. Exposed to low-level alpha radiation emission coming from coated accessories, with safety measures in place per NEA safety requirement.

Work Address:

II-VI Singapore Pte Ltd

Entity of Coherent Corp

Blk 5012, Techplace II

#04-07 Ang Mo Kio Avenue 5

Singapore 569876

This role will ensure the smooth operation of all production equipments through maintenance of repair records, collaboration with internal and external teams, and compliance with Food Safety requirements. The role involves coordinating maintenance tasks, managing inventories, analyzing data for process optimization, and maintaining documentation for audits and inspections.

Key Responsibilities:

• Database Management: Maintain an organized database of repair and maintenance records for all equipments, ensuring all documentation is up-to-date.
• Asset & Inventory Records: Track and maintain the equipment's spare parts inventory, ensuring availability for repairs.
• Vendor Coordination: Work with internal teams and external vendors to schedule and coordinate repair, maintenance, and inspection tasks.
• Schedule Monitoring: Oversee maintenance and calibration schedules, ensuring all preventive tasks are completed within established timelines.
• Process Improvement: Review and update maintenance procedures and checklists to improve efficiency in collaboration with the maintenance team.
• Data Analysis & Reporting: Compile and analyze maintenance data, generating reports to identify trends and opportunities for optimizing maintenance processes.
• Cross-functional Collaboration: Work with various teams to implement best practices for maintenance and ensure effective communication across departments.
  

Requirements:

• Possess a Degree in Engineering
• Possess at least 2 - 3 years’ Equipment Maintenance experiences
• Strong understanding of maintenance systems.
• Excellent organizational and communication skills.
• Ability to work with cross-functional teams and external vendors.
• Strong analytical skills and attention to detail.

Interested may sent your cv/resume to 84597671

Responsibilities

• Diagnose and solve technical problems on semiconductor machinery and systems, such as computer setups, advanced software, or networked/wireless systems.
• Carry out on-site installations, continuous improvement initiatives, parts overhauls, preventative maintenance, equipment modifications, and repair work.
• Act as the main point of contact between the company and the customer for both administrative and technical matters related to assigned projects.
• Organize logistics and coordinate with customers on equipment-related issues.
• Address customer complaints, offering timely solutions to resolve their issues.
• Track product performance, providing regular updates and feedback on customer service requests.
• Report recurring customer concerns to management to help prevent future issues.

Requirements:

• Minimum of 2 years of related experience in Semiconductor Industry
• Possess at least a Diploma/Degree in Electrical or Electronic Engineering
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXV54V53

The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Tasks:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• ecome the technical Expert for the respective machine specialization.
• ● Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Materials / Material Sciences Engineering
• 5 years of relevant work experience in Etch Equipment in the semiconductor industry
• LAM tools preferred
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Service Technician(Kitchen Equipment)

Working days: 5.5days

Working Hours: Mon-Fri 8am - 5pm, Sat 8am -12pm

Working Location: Defu Lane 10 (Hougang)

Salary: Basic $2300 - $3000 + OT (When require)

Job Description:

• Install, service, and repair commercial kitchen equipment.
• Perform routine maintenance and inspections to ensure equipment operates efficiently and safely.
• Diagnose mechanical and electrical issues and implement effective solutions.
• Perform testing and inspection on finished goods for quality issues and perform corrective actions.
• Provide assistance and technical service requests to and by project clients.
• Other duties as assigned by management.

Tee Xin Li Reg No: R24121619

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

(Technical Specialist/ Equipment technician/ Manufacturing Technician/ Production/ Maintenance Technician/ Engineering Assistant/ Assistant Engineer/ Service)

1 vacancy - Afternoon Shift: Mon - Fri 3pm - 11pm / Sat: 1pm-7pm

• Permanent Position / MNC/ Near Woodlands MRT/ Urgent Hiring!!
• AWS, Annual Leave, Medical & Dental Benefit
• Attendance Allowance + Shift Allowance, OT
• Training will be provided

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities:

• To carry out repair & maintenance of in-house Production Automation Machines
• To provide support to ensure production machines & equipments is repaired timely.
• To attend to unforeseen machine breakdown.
• To carry out Preventive Maintenance (PM) as scheduled.
• To support all Automation Integration.
• To recommend improvement to enhance Productivity & Yield.
• Compliance to all regulatory and in house system requirements especially for medical and automotive customers
• Prepare the automation documents, reports and records on daily basics

Requirements

• NTC in Engineering-related discipline, preferable in Mechanical/Electrical/Electronics/Plastic technology.
• 1-3 years relevant experience in Machine repairs and maintenance
• Good team player with positive working attitude

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Ryan Tan (EA Reg. no.: R23116422)

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

[email protected] I www.rightrecruit.com.sg

Responsibilities

• Diagnose and solve technical problems on semiconductor machinery and systems, such as computer setups, advanced software, or networked/wireless systems.
• Carry out on-site installations, continuous improvement initiatives, parts overhauls, preventative maintenance, equipment modifications, and repair work.
• Act as the main point of contact between the company and the customer for both administrative and technical matters related to assigned projects.
• Organize logistics and coordinate with customers on equipment-related issues.
• Address customer complaints, offering timely solutions to resolve their issues.
• Track product performance, providing regular updates and feedback on customer service requests.
• Report recurring customer concerns to management to help prevent future issues.

Requirements:

• Minimum of 2 years of related experience in Semiconductor Industry
• Possess at least a Diploma/Degree in Electrical or Electronic Engineering
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXV54V53

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Equipment Engineer to be part of our Diffusion Department diverse team of talent.

Responsibilities:

• Responsible for daily operations in the Diffusion CMP Equipment Module.
• Perform corrective & preventive maintenance on equipment to maintain good quality & productivity performance.
• Provide 24×7 support for troubleshooting equipment & problem solving in Factory operations floor.
• Maintain documentations for equipment installation, maintenance and troubleshooting procedures for reference purposes.
• Develop continuous improvement to enhance equipment reliability and cost of ownership.
• Drive innovation in factory automation, processes and systems to improve productivity.
• Coordinate, supervise & develop a team of high performance equipment engineers.

Requirements:

• Degree in Chemical/Electrical & Electronics/Materials/Mechanical/Microelectronics/Physics or equivalent
• Familiar with Mirra polishing tools and DNS Scrubber
• Highly motivated & strong team player
• Possesses good communication and interpersonal skills
• Quality 1st mindset & strong analytical, problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Candidate Profile:

• Min 3-5 years of relevant experience in process engineering with a precision equipment manufacturer.
• Degree in Engineering (Mechanical/Material/Production)
• Experience in Process Design and control in semiconductor equipment
• Strong in statistical tools, SPC, DOE

Key Responsibilities:

• Define and Document Equipment process requirements and specifications.
• Perform Process characterization to optimize critical process paths to meet equipment specifications.
• Perform data analysis using statistical techniques and conduct process capability studies
• Participate in continuous process improvement activities to enhance Equipment capability.
• Review, simplify, and optimize internal buy-off specifications for equipment with the quality assurance department.
• Support Equipment manufacturing activities by helping to troubleshoot and resolve process-related issues

Service Technician(Kitchen Equipment)

Working days: 5.5days

Working Hours: Mon-Fri 8am - 5pm, Sat 8am -12pm

Working Location: Defu Lane 10 (Hougang)

Salary: Basic $2300 - $3000 + OT (When require)

Job Description:

• Install, service, and repair commercial kitchen equipment.
• Perform routine maintenance and inspections to ensure equipment operates efficiently and safely.
• Diagnose mechanical and electrical issues and implement effective solutions.
• Perform testing and inspection on finished goods for quality issues and perform corrective actions.
• Provide assistance and technical service requests to and by project clients.
• Other duties as assigned by management.

Tee Xin Li Reg No: R24121619

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Location: Jurong East

Working hours - Mon – Fri, 8.30am – 5.30pm

Requirements

• Handling of equipment for military and security (eg Chemical Detector, Radiation detector, Biological Detection Systems for Military , Acoustic Hailing Equipment / System etc)
• IT software installation and configuration.
• Handling enquiries on products such as post-sales delivery of equipment
• Carry out maintenance,diagnostic analysis, trouble shooting and repair work for equipment.

Requirements

• Higher Nitec / Diploma in Electrical & Electronics Engineering with min 5 years relevant experience
• Experience in customer relations.
• Able to do Stand-by duty if required

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Responsibilities

1. Classify the received Parts into self-repair/outside-repair/Stage/Scrap/Return and place them on the corresponding racks of each Category, and convert the ePMS Level 1 order into a Level 2 order.
2. Open bidding and repair the Parts to be sent to the manufacturer for repair, and convert the ePMS second-level order into a third-level order and issue a warehouse receipt.
3. Each unit listed on the front of the maintenance will be sent to the Parts for repair, and after completion, the ePMS secondary order will be converted into a closed case and returned to the warehouse
4. FAB Urgent case support : The original factory has no ingredients, or the unit price is very high and the seasoning is urgently needed
5. Track and manage the progress of the repaired items sent by the manufacturer for repair, and control the Parts Repair work for Cycle time; provide USER query
6. Key/Special Component Sourcing (for Parts that are discontinued or unreasonably priced).
7. Parts Sourcing / Replacement Solution for Old Discontinued Machines

Qualifications

1. Possess at least a Bachelor's Degree in Electrical and Electronic Engineering.
2. Minimum 2 years relevant work experience in semiconductor related technology equipment maintenance.
3. Knowledge of Servo control loop will be an advantage.
4. Good communication and interpersonal skills.
5. Able to work independently and able to handle stress effectively.

Work Week & Shift: 6 days, rotating shift

Location: Airfreight Terminal

Job Responsibilities:

• will operate equipment that requires a class 3 driving license, such as tractors, at the airside.

Compensation:

• sign-up bonus of $5000
• annual wage supplement (AWS)
• allowances*
• overtime
• transport will be provided for working beyond midnight.

Responsibilities

• Execute job assignments using appropriate service tools with precision and care.
• Oversee the installation of electrical components, such as switches, sensors, transmitters, alternator parts, and control panels.
• Assist in assembling and disassembling key engine components, including oil pumps, water pumps, and cylinder heads, with experience in engine overhauls preferred.
• Conduct the installation and adjustment of engine fuel injectors, timing, and valve lash.
• Support and perform the mechanical installation of radiators, engines, alternators, gearboxes, and related piping and couplings.
• Align equipment, such as radiator assemblies, engines, and alternators, ensuring proper setup and operation.
• Prepare generators for load testing and carry out required safety and diagnostic tests while recording necessary parameters.
• Troubleshoot and maintain knowledge of engine and alternator systems, hydraulic steering systems, and marine gearboxes for issue resolution.

Requirements:

• Possess an ITE qualification or equivalent certification in a related field.
• 2 years of hands-on experience in heavy-duty diesel or automotive mechanics, with marine or offshore exposure preferred.
• Prior apprenticeship with a recognized engine-related organization will be an added advantage.
• Proficiency in IT systems and knowledge of programmable logic controls will be beneficial.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: L84VX85R

Responsibilities

• Diagnose and solve technical problems on semiconductor machinery and systems, such as computer setups, advanced software, or networked/wireless systems.
• Carry out on-site installations, continuous improvement initiatives, parts overhauls, preventative maintenance, equipment modifications, and repair work.
• Act as the main point of contact between the company and the customer for both administrative and technical matters related to assigned projects.
• Organize logistics and coordinate with customers on equipment-related issues.
• Address customer complaints, offering timely solutions to resolve their issues.
• Track product performance, providing regular updates and feedback on customer service requests.
• Report recurring customer concerns to management to help prevent future issues.

Requirements:

• Minimum of 2 years of related experience in Semiconductor Industry
• Possess at least a Diploma/Degree in Electrical or Electronic Engineering
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXV54V53

• Increase revenue and market growth of general laboratory products and solutions in the assigned market segment.
• Handle enquiries from customers and prospects, providing excellent pre-sales and after-sales support.
• Build and maintain positive relationships with existing and potential customers, along with key opinion leaders.
• Monitor market trends and evaluate customer requirements.

Requirements:

• Degree in Marketing or equivalent.
• At least 4 years of sales experience in Laboratory Equipment/Consumables.
• Strong understanding of scientific and general laboratory consumables.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities:

• Coordinate with departments to process customer purchase order, create DO & return forms, arranging equipment testing and maintenance.
• Responding to customer requests, clarifications and resolving any issues with customers
• Prepare and submit tax invoices, progress claims and statement of accounts to customers
• Follow up with customers on receivable and final accounts for completed projects.
• Liaise with vendors to support project executions and verify vendor invoices.
• Perform asset, inventory and financial reconciliation with Finance and generate monthly reports
• Maintain records for annual accounting and ISO audits.

Requirements:

• Diploma and above with proficient in Microsoft Office tools.
• Experience with ERP system and in construction industry will be an advantageous

Interested applicants, send in your updated resume by clicking “Apply Now”

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105