Job Description

• 5 years relevant working experience in Water Treatment industries is preferable.

• Experienced in the design of water treatment plants (desalination, potable water, demineralization) and membranes systems (MBR, MF/UF, Reverse Osmosis, Nano-Filtration, etc.), experience in Demineralization System will be added advantage.

• Strong technical knowledge (i.e Process Design and Calculation) in Membrane (MF/UF/RO/EDI), Ion Exchange, and pretreatment processes (coagulation / flocculation, sedimentation, clarification, filtration)

• Review Client’s Requirement, Technical Specifications & Tender Specifications to generate engineering deliverables (General Specification & Particular Specifications, Datasheets, Major Equipment List, Pipe List, Mass Balance, Hydraulic Profiles, Process Flow Diagram, Process & Instrumentation Diagram, etc.)

• Assist the Engineering Manager & Lead Engineer, Process on engagement with Clients, Consultants, Sub-Contractors, Vendors, and others for the development of design, procurement, fabrication, construction, erection and commissioning works.

• Coordinate with inter-disciplines engineering team (Process, Mechanical, Electrical, Instrumentation & Control Automation, C&S and Drafting) on development of engineering deliverable on a timely basis.

• Procurement Services Support: Develop the applicable Equipment List/Package, Technical Specifications and Bill of Materials to support Procurement Department to issue Request for Quotation (RFQ). Assist to review the RFQ, prepare applicable technical & commercial clarifications with selected Sub-Contractors or Suppliers. Provide justification on the shortlisted Sub-Contractors or Suppliers for onward negotiations.

Requirement:

• Degree in Chemical Engineering or Environmental.

• Prior experience of at least 5 years in process design. Experience in UltraPure Water (UPW) will be added advantage.

• Ability to establish and maintain appropriate relationships with team members.

• Able to work independently with minimal supervision

What we expect:

• Oversee the IT infrastructure and administration of the server, network, and relevant devices.

Ø Administration, Configuration & Maintenance of Network Infrastructure ( Firewall like Fortinet, Load Balancer like Peplink/F5 )

Ø Responsible for installing, configuring, and maintaining VM environment (VMWare, Hyper-V)

Ø Active Directory, DHCP, DNS, Anti-virus server

• Maintain servers and network file back-up/restore procedures (Internal & Cloud environment)
• Provide Local & Wide Area Network, Router, Internet, and system support/troubleshooting at all levels.

What we are looking for:

• Candidate must possess at least a Diploma or Degree in Computer Science/Information Technology or equivalent.
• At least 3 years of working experience in the related field is required for this position.
• Ability to work independently and efficiently, managing timelines and expectations.
• Good team player with strong analytical, communication, and troubleshooting skills.
• CCNA/CCNP certification is an advantage
• Knowledge in the cloud environments (AWS, Azure, Ali-cloud) will be an advantage

What we offer:

• Attractive rewards for long-term service staff
• Energetic and friendly working environment (flexible working hours, quarterly events, staff birthday celebration and etc.)
• Medical insurance

CCTV SYSTEM

• Involve in the project and maintenance services related with CCTV Systems, Access Control Systems, PA Systems, Alarm Systems and Server & Network Infrastructure and whenever required.
• Perform Installation, Implementation, Configuration and testing of system/storage equipment & setup.
• Troubleshoot Problem encountered on site.
• Develop implementation plan, migration plan, and acceptance test plan for the project.
• Work closely with Project/Maintenance Managers in Planning the implementation tasks.

ACCESS CONTROL SYSTEM

• Installation: Install and configure access control systems, including electronic locks, card readers, biometric scanners, and control panels.
• Maintenance: Perform routine inspections and preventive maintenance on access control systems to ensure optimal performance.
• Troubleshooting: Diagnose and resolve issues with access control hardware and software, including system malfunctions, wiring issues, and connectivity problems.
• Software Management: Install, update, and manage access control software, ensuring that all systems are up-to-date and compliant with security protocols.
• Customer Support: Provide technical support and training to clients on the operation and management of access control systems.

NETWORK

• Perform Installation and troubleshooting on network devices like Cisco, Aruba and Allied Telesis.
• Knowledge of Routers/Switches architecture and software upgrade procedure
• Support Network infrastructure Projects.
• Provide support to resolve network incidents and issues.
• CCNA/CCNP Certification

Job Position:

Mechanical Engineer

Job Description:
We would like to recruit a Mechanical Engineer to aid our team in the development of a custom 3D printer. The machine would require a complex tool swapping system for custom built extruders. Furthermore, it will require automation mechanisms to increase production volume and efficiency
• Design and develop a 3D printer, including the kinematics, electronics, and thermal components. Generating a BOM of all parts required based on knowledge of 3D printing systems.
• Generate a detailed CAD model that shows the assembly process of the machine, to be provided to suppliers for the purchasing of parts.
• Generate custom G-Code to accommodate for the tool changing
• Generate custom G-Code for the automation mechanisms
• Include safety precautions for the multiple extruders and build plate
• Optimise the design as the project progresses through troubleshooting design flaws during testing, allowing for a more reliable printer.

Required/Preferred Skills:

• CAD Profiency
• Product Design and Design for Manufacturing & Assembly
• Electrical wiring and Electronics
• Problem-Solving
• Testing and Validation
• Project Management
• Familiarity and experience assembling and upgrading FDM systems
• Enthusiasm in building and problem solving

Required/Preferred Qualifications:

Bachelor’s or master’s degree in mechanical engineering, Mechatronics, or a related field.

Experiences:

3+ years of experience in mechanical design, preferably with building customised 3d printer experience and related AM skills

Salary: Up $3000+OT

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Communicating with other team members to solve problems.
• Conduct / perform training to employees to improve GMP / international standards certification awareness and compliance.
• Other duties as and when assigned by management.

Requirements

• Diploma in Engineering
• Able to write simple report

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Job Summary:

We are looking for an experienced Infrastructure Engineer. This role requires the candidate to architect and build AWS solutions to achieve business outcomes, while also developing dashboards for cost optimization and compliance to enhance the public cloud experience.

Mandatory Skill Set:

• Degree in Computer science or a related field;
• Minimum 5 to 7 years of IT Infrastructure work experience;
• Minimum 5 years of experience with CloudFormation, specializing in both application deployment and architecture management;
• Strong skills in Python or Java for developing custom automation tools, dashboards, and cloud API integrations;
• Extensive hands-on experience with AWS, deploying and managing infrastructure and services;
• Knowledgeable in containers, Kubernetes, and serverless architectures. Skilled in infrastructure monitoring, log analysis, and incident response automation;
• Must have good communication and writing skills;
• Strong analytical, problem-solving skills.

Desired Skill Set:

• Proficient in using Terraform, and Ansible for infrastructure automation and orchestration.

Responsibilities:

• Design and build automated systems to streamline deployment, monitoring, and operations using infrastructure-as-code and configuration management tools;
• Develop and implement robust CI/CD pipelines in collaboration with development teams to drive automation in testing and releases;
• Responsible for utilizing public cloud APIs and services to create scalable, fault-tolerant automation solutions;
• Research and assess new tools for automating security, infrastructure, and operations;
• Implement automated security monitoring, alerting, and remediation to proactively resolve issues and create proofs of concept and prototypes to showcase automation solution value;
• Collaborate with stakeholders and development teams to design automated solutions that meet complex business requirements and build dashboards displaying key metrics, such as cost optimization and compliance;
• Responsible to stay current on automation trends and best practices to bring innovative solutions to the organization.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

The L1 Security Engineer is responsible to:

• To provide 24 x 7 support for Data Center running on 12 hours shift

• Maintain systems plus controls to protect unauthorized access, disclosure, modification and deletion of information through resources and computer networks.

• Support logs, categorizes, prioritizes, tracks, and routes

• (i) incidents reported by users or

• (ii) alarms raised by monitoring tools

• Interact directly with business technical specialist to guide on authentication, authorization and encryption solutions.

• Investigate known and suspected information security events and develop related reports.

• Conduct hardware and software security alerts as available.

• Resolve issues through responding IT threats and vulnerabilities.

• Conduct routine security risk analysis, evaluate business needs against collision, vulnerabilities and search resulting risks.

• Implement Change Request and Service Request.

• Perform patching on security equipment.

• To implement change request and service request.

Requirements:

• Minimum 2 years of relevant working experience in IT infrastructure operation

• 12 hrs shift working

• Be customer and service oriented, positive working attitude

• Good Knowledge of following products will be advantageous:

-Beyond Trust

-SEPM

-RSA

-Palo Alto

-Checkpoint

-Fortigate

-Safenet

Job Overview

Semiconductor devices are the necessity in our modern life. In Aurigin, we are a team of brilliant people designing and manufacturing automated systems in the Semiconductor industry. We are continuing to grow big and fast. We are inviting passionate Mechanical Design Engineers to join in this journey with us.

Responsibilities and Duties

• Design & develop high precision & high-speed machines using CAD tools.
• Test and evaluate design.
• Conduct experiments methodically, analyse data and interpret results.
• Identify, formulate and produce effective solutions to emerging problems.
• Evaluate final product’s overall performance, reliability and safety.

Requirements

• Bachelor’s/Master’s Degree in Mechanical/Mechatronics Engineering and preferably with design experience in similar equipment / machine / automation engineering environment.
• Good aptitude and strong interest in machine design.
• Robust understanding of core concepts including mechanics, kinematics, thermodynamics and materials science.
• Creative thinker with strong analytical and problem-solving skills.
• Accurate and strong attention to detail.
• Good communication skills.
• Applicants with demonstrated relevant experience will be consider for senior appointments.

About CAD-IT:

Established in Singapore in 1991, our vision is to be the preferred Industry 4.0 partner to our valued customers and a key global contributor to the successful use of innovation and technology. Our mission is to provide world-class Industry 4.0 solutions, thereby helping our customers and their supply chains achieve greater innovation, quality, productivity, reduced costs and time-to-market, whilst being good stewards of the resources that are entrusted to us.

Key Responsibilities:

• Establish and maintain long-term relationships with existing and prospective customers to maximize business opportunities.
• Build and own a sales portfolio, & develop and maintain a sustainable pipeline.
• Create, execute and maintain account plans for existing customers highlighting profile, share and value opportunities including strategy, goals, tactics and milestones.
• Stay up-to-date with the company's new and existing products/services so that once you have identified customers' needs, you are able to conduct technical presentations, product demonstrations and software evaluation.
• Initiate and drive technical activities in line with the business goals such as:
• Leverage on advanced-level engineering knowledge to analyze technical needs and solve complex engineering problems
• Perform engineering simulation consulting services
• Customize and conduct ANSYS software training

We would love to hear from you if:

• You possess a Bachelor’s Degree in Engineering (Electrical, Electronics, Telecommunications, Mechanical, Mechatronic, Electromechanical) or equivalent.
• You have knowledge in MEDDIC, Product Design, Manufacturing Process, FMEA, DOE Optimization, Root-Cause Analysis, Six-Sigma or TRIZ methodologies.
• Experience in ANSYS software will be highly advantageous.
• You have experience in applying PLM/CAD/CAM/CAE/Additive Manufacturing solutions in solving industrial problems.
• You have the ability to build relationships with prospective customers through the use of various prospecting techniques as well as maintaining relationships with current customers.
• You have 1 to 2 years sales experience.
• You are professional, with a strong sense of ethics and morals.
• You are self-motivated and sales-driven.
• You have excellent communication, presentation and influencing skills.
• You are able to work in a fast-paced environment.

What would you get?

• Training and Development
• Commission & Discretionary Yearly Bonus
• Medical & Insurance Benefits

CAD-IT rewards employees in various ways based on their role, contribution and performance. We believe in training and developing our employees to help them achieve their fullest potential.

The Product Tester Engineer will work in Interoperability Test Lab in Singapore Development Centre. This Test Lab performs integration tests of multi-vendor devices such as transmitters, control valves, multiplexers, remote IOs etc, against Yokogawa Control Systems (CENTUM VP, ProSafe-RS, Stardom, PRM and FieldMate)

The main responsibilities are:

• Liaise with device vendors for coordinating testing requests
• Plan and execute product testing
• Setup, maintain and upgrade lab assets, review test procedures and work process and implement improvement periodically
• Support in first line troubleshooting of customer reported issues related to tested products
• Support product development team for each development release or ad-hoc testing

Requirements:

• Minimum 3 years of experience in the process automation industry, either in instrumentation or control system
• Degree in Engineering/Computer Sciences
• Knowledge of digital communication protocols such as HART, Foundation Fieldbus, Profibus/Profinet, ISA100, WirelessHART, OPC-UA etc
• Knowledge of standard technologies such as FDT/DTM, FDI, PA-DIM, OPA, NOA etc
• Experience with Yokogawa DCS system and Field Instrument products would be valuable
• Some experience with product software testing would be advantageous

Yokogawa is an Equal Opportunity Employer. Yokogawa wants a diverse, equitable and inclusive culture. We will actively recruit, develop, and promote people from a variety of backgrounds who differ in terms of experience, knowledge, thinking styles, perspective, cultural background, and socioeconomic status. We will not discriminate based on race, skin color, age, sex, gender identity and expression, sexual orientation, religion, belief, political opinion, nationality, ethnicity, place of origin, disability, family relations or any other circumstances. Yokogawa values differences and enables everyone to belong, contribute, succeed, and demonstrate their full potential.

Are you being referred to one of our roles? If so, ask your connection at Yokogawa
about our Employee Referral process!

The Role

We are seeking a highly driven, talented, and self-motivated Senior Software Engineer to join our team of world-class professionals. As a Senior Software Engineer, you will lead the development of large-scale, distributed systems or applications, working with cutting-edge internet/software technologies.

Key Responsibilities:

· Collaborate with product and design teams to understand different customer needs, provide technical feedback and agree on minimally viable solutions for the release

· Lead architecture and design, applying best practice software engineering principles such as separation of concerns, high cohesion, low coupling, abstraction, encapsulation, interfaces, and dependency injection

· Make technical decisions while weighing trade-offs and lead large, complex projects with sound technical experience

· Plan, execute, and complete tasks both independently and as part of the development team

· Coordinate closely with other teams, including QA, Security, DevOps teams throughout the software development process to ensure smooth delivery of your solutions

· Mentor junior team members through formal and informal training sessions, design and code reviews, etc.

Key Skills and Experience

· 3 to 5 years’ experience in developing enterprise application software

· Strong knowledge and hands-on experience with Python backend development

· Experience with Python frameworks (e.g., Flask, Django)

· Experience with relational database technologies such as MySQL or MariaDB

· Proficient understanding of the software development process from design to deployment

· Proficient understanding of code versioning tools, such as Git

· Bachelor's degree or higher in Computer Science, Computer Engineering, or a related technical discipline

Desired Attributes

· Experience with PHP backend development

· Experience with non-relational database technologies

· Experience in scaling, building, and deploying enterprise-level applications and tools

· Experience in developing in innovation, R&D, labs, or start-up like environments

· Certification in any agile methodologies

· Ability to solve complex performance problems and architectural challenges

· Self-motivated, proactive, and driven

Compensation/Perks

You will be rewarded with a competitive compensation package, including excellent benefits such as medical, 18 days to 21 days annual leave and stock options.

Kiteworks will be prioritising applicants who have a current right to work in Singapore, and do not require company visa sponsorship.

Job Description

The successful candidate will be part of the Cloud & Platforms team.

He/She will be responsible for the following:

• Deep exposure to on-premises Linux and/or Windows administration on VMWare including SAN and storage solutions.

• Perform system administration and troubleshooting activities (including outside normal business hours) in accordance with company policies and procedures.

• Create and maintain documentation, and processes.

• Provide a focus on automation and Infrastructure-as-Code (IaC) to improve agility using tools such as Ansible, Python, and Terraform.

• Support audit and infrastructure/network security scans, disaster recovery and security related drills.

• Explore, learn and deploy new technologies that will help the company to reduce cost or improve operational efficiencies.

Requirements

• Possess a degree in Information Technology or related fields.

• Minimum of 5 years of IT experience with at least 3 years of hands-on experience in a similar role.

• Experience managing both Unix (Linux and/or AIX) and Windows servers. Expert level (e.g. certified) in one at least one: covering installation, configuration, security, networking, storage, patching, hardening etc.

• Experience working in VMWare environments.

• Practical experience administering SAN and related storage technologies.

• Experience with Python/Ansible scripting skills for provisioning and automating dynamic infrastructure.

• Demonstrate strong knowledge in infrastructure areas such as virtual server technologies, storage, networking, internet protocols, operating systems, scripting & monitoring tools and IT Security.

• Experience in Agile methodologies, DevOps, CI/CD and related tools preferred.

• Strong analytical, project management, communications, and interpersonal skills.

Company Overview

The team has more than 15 years of experience developing 1G/2.5G/5GBase-T Ethernet physical layer PHY and switch chips for data centers, enterprise networks, and gateways and has sucessfully developed multiple generations of the most competitive products.

The company is headquarted in Kunshan, and the R&D team is located in Kunshan, Suzhou, Shanghai, and Singapore.

The company is currently developing Ethernet PHY, gateway, and TSN switching chips. The target market is automotive & unpiloted driving, China's intelligent manufacturing, rail transit, and intelligent grid building industry provide domestic chips with "Independent intellectual property rights, independent and controllable.

We offer attractive salary commensurate with work experience + AWS + Bonus + Stock options

Job Responsibilities:

1. Participate in the design and realization of high-speed low-power small-area network chips.
2. Responsible for the design and verification of analog and mixed-signal circuits, particularly the CMOS signal processing circuits with profession in one of these areas, RX(e.g., AFE, ADC), TX(Serializer, DAC), PLL, LDO, ESD/EMC suppression etc.
3. Support high-level functional development and verification of analog and mix-circuit circuitry.
4. Cooperate with product definition, layout implementation, lab test and verifications.

Job Requirements:

1. Master with minimum 2-3 years' experience or PhD with > 1 years' experience in high-performance analog/mixed-signal ICs.
2. Proven experience in IC design including chip tape-out and lab evaluation of design.
3. Solid experience in Using EDA CAD tools and performing Analog Custom Layout.
4. Experience in measuring IC performance and debug of design to correlate simulations to measurements.
5. Deep understanding of fundamental, including: detailed transistor level design, device physics, control/feedback loop stability analysis.
6. Direct project experience in at least one of the following areas a plus: ADC-DAC design PLL or clock/freq generation design.
7. Knowledge & experience in Verilog coding a plus.
8. Strong communication skills and good team player.

• Attend User / Client meetings acting as technical lead in regard to project management as required.
• Conduct internal training to staff for pre-sales engagement and ensure knowledge transfer of design methodology, cost modelling, etc. to employees.
• Manage each phase of the project from design to completion and ensure efficient use of resources and enhance cost-effectiveness.
• Supporting new business venture overseas
• Propose design concept.
• Summarize design requirement.
• Analyzing existing facility
• Conceptual sizing/design
• Risk analysis by checking consistency between tender and quotation specification.
• Prepare supplemental material (Spec, DWG) for quotation.
• Review BoQ (Material and quantity)
• Propose Value Engineering and technical review.
• Prepare presentation material for tender interview.
• Provide audit and consultancy services.
• Vigilant system support (for Mechanical Engineer)
• Site survey
• Draft proposal document
• Provide technical support.
• Provide CFD simulation report (for Mechanical Engineer)
• Project Management for new construction and D&B project in design phase working directly with clients, consultants, statutory authorities, and contractors.
• Leading or facilitating the design review meetings and design workshops.
• Feasibility study
• Assessment of mission critical building
• Concept & schematic design
• Summarize design requirement.
• Analyzing existing facility
• Schematic design report
• Design development (Spec., technical calculation sheet)
• Propose new, feasible innovation and stay abreast on the latest trend in the market.
• Product differentiation
• Detail design
• Arrangement of shop drawing with drafter
• Authority submission arrangement with QP
• Input for T&C requirement (prepare test script and ensure that the methodology is in line internally)
• Design Coordination with other discipline.
• Review of construction material / shop drawing / MoS
• Shop drawing coordination with sub-con/vendor & other stakeholders.
• Periodical inspection (internal check for quality improvement)
• Ensure site installation works are accordingly to project plans / designs / time frame.
• T&C consultation for FAT, SAT, and IST with Technical & Q&C department
• Handover submission arrangement with drafter team and project team (As build DWG)
• Required to learn and adopt working in Cloud, Design Collaboration and Model coordination and QA/QC own work.
• AutoCAD & Revit experience with Cloud Work-sharing (ACC) is desirable.
• Depending on project need, this position may be located On-Site or Off-Site and requires frequent travel to the project site.
• Any other duties assigned by Senior Manager

Job Summary :

Provide pre-sales and post-sales support to customer on semiconductor testing. Maintain customer satisfaction so as to maintain or become the preferred tester platform

Job Responsibilities:

• Project delivery and support of Test Program/Test Library creation, conversion or consultation as required by Customer
• Provide support and consultation for Hardware and Software solutions for Customer Projects
• Post sales consulting and support including test methodology enhancements and modifications, test hardware/ software feature recommendations and audit
• Support and debug production issues like correlation, test time and yield discrepancy etc
• Delivery of application training, knowledge transfer and skill-up for Customer

Minimum Qualifications:

• Bachelor's Degree or equivalent
• Minimum 7-10 years of working experience in IC testing industry
• Good knowledge of digital/Mixed signal test methodologies
• Well versed with Java and C++, script programming, knowledge on 93000 software and debugging tools will be an added advantage
• Good experience in test program development and test floor exposures
• Strong problem solver with good technical capabilities, good communication skill, self-motivated, customer focus and result oriented
• Ability to work independently with minimum supervision

Join our global team to help design, implement, improve, and operate our worldwide Internet Breakouts as well as the VPN Services for Bosch Users and partners. Ensure that the security infrastructure deployment and configurations align with industry standards, compliance requirements, and organizational security policies. Provide Level-2/Level-3 Support for our service portfolio, including shared on-call duty (remote). Collaborate closely with our Architects, Engineers, internal customers, partners, and stakeholders. Initiate, manage, and implement changes to our security infrastructure.

Responsibilities:

• Design, implement, and operate worldwide Internet Breakouts and VPN Services for Bosch Users and partners.
• Ensure security infrastructure deployments and configurations comply with industry standards, organizational policies, and compliance requirements.
• Provide Level-2 and Level-3 support for the service portfolio, including participation in shared on-call duty (remote).
• Work closely with Architects, Engineers, internal customers, partners, and stakeholders.
• Initiate, manage, and implement changes to the security infrastructure.

Qualifications:

• Bachelor's degree in Computer Science, Information Technology, or a related field.
• Strong knowledge of network technologies, TCP/IP, NAT, Routing, Web protocols, and SSL.
• Advanced knowledge in networking technologies (e.g., BGP, OSPF).
• Advanced knowledge in VPN technologies (e.g., IPSEC, SSL-VPN).
• Broad knowledge of basic network and security concepts and implementations (NAT, DNS, Firewalling, ACLs, etc.).
• Experience with major hardware and software platforms from Cisco (ASA/Firepower, IOS, IOS-XE).
• Beneficial knowledge in software-driven networking and network automation (Python, Ansible, CI/CD, GIT, Scripting, etc.).
• Experienced in troubleshooting with packet capture and related tools.
• Confident in handling both Linux and Windows systems.
• Effective communication skills to collaborate with highly capable, international, and cross-functional teams.
• Excellent problem-solving skills, attention to detail, and a proactive mindset.
• High degree of creativity, pioneering spirit, and implementation strength.
• Distinct customer and service orientation as well as consulting skills.
• Possess a confident demeanor, friendly and helpful attitude.
• Task-driven and result-oriented individual.

Additional information:

• Willingness to work in an "On-Call Duty" setup.
• Able to work beyond normal office hours.

As a Data Analytics Engineer, you will work closely with cross-functional teams to understand business requirements, identify data sources, and develop robust data pipelines. Your expertise in data modeling, analysis, and visualization will be crucial in extracting meaningful insights from large datasets.

Responsibilities:

- Collaborate with stakeholders to understand business objectives and translate them into solutions.

- Design and develop data pipelines to extract, transform, and load (ETL) data from various sources.

- Perform exploratory data analysis to identify trends, patterns, and anomalies in the data.

- Develop predictive models and algorithms to solve complex business problems.

- Implement data visualization techniques to present insights in a clear and actionable manner.

- Optimize data storage and retrieval processes for improved efficiency and scalability.

Requirements:

- Proven experience as a data engineer or data analyst, with a focus on building analytical solutions.

- Proficiency in programming languages such as Python, SQL, and R.

- Strong understanding of data modeling techniques and database design principles.

- Experience with data visualization tools such as Tableau, Power BI

- Familiarity with machine learning algorithms and statistical analysis techniques.

- Excellent communication and problem-solving skills.

- Ability to work independently and collaboratively in a fast-paced environment

Job Responsibilities

• Assist engineers in the setup, configuration, and commissioning of PLCs, DDCs, edge devices, sensors, and servers.
• Support engineers in preparing system drawings using AutoCAD.
• Troubleshoot and resolve issues during the deployment of BMS / EMS / Integrated Platforms in collaboration with engineers.
• Work with engineers and project managers to prepare and compile essential documentation, including samples, catalogs, method statements, risk assessments, panel layout details, design/shop drawings, Operational & Maintenance manuals, As-Built drawings, and other required materials for consultant and client review and approval.
• Collaborate with the team to monitor and manage project execution, ensuring adherence to planned schedules, quality standards, and cost requirements.
• Ensure effective communication and coordination with all stakeholders, including internal teams, clients, and contractors, to facilitate smooth project execution.
• Perform Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) in alignment with client requirements.
• Create and maintain BMS documentation, including Functional Design and Software Test Documents.
• Conduct preventive and corrective maintenance on deployed systems to ensure optimal performance.

Job Requirements

• Diploma in Electrical, Electronics, Instrumentation & Control or related discipline.
• At least 2 years of hands-on experience in project execution related to I&C systems, SCADA, Industrial Automation, or BMS systems.
• Strong understanding of electrical systems, control systems, and networking installations.
• Hands-on experience with automation control systems in diverse environments, including commercial buildings, industrial facilities, and data centers.
• Knowledge of HVAC systems, Building Automation, Energy Management, and other related control systems.
• Proficient in programming and troubleshooting industry-standard communication protocols, such as BACnet, MODBUS, and LON; PLC knowledge is a plus.
• Ability to assist in analyzing operational data from buildings or industrial services, including chilled-water plants.
• Strong problem-solving skills, with the ability to support technical implementation and ensure smooth execution of projects.
• Good written and verbal communication skills for interacting with customers and preparing reports.
• Self-motivated, with strong analytical and troubleshooting capabilities to support engineering tasks.

• Reporting to the Project Manager
• Overseeing the construction activities, planning, implementation, and monitoring work schedules in accordance to the master and detailed work program.
• Liaise with consultants for technical issues and coordinate with subcontractors on the site activities.
• Managing interfaces with other contractors working on the project.
• Prepare project progressive report to the Project Manager/Project Director.
• Prepare report and method statement.
• Monitor ongoing construction activities.

Backup Engineer is responsible for:

• Configure and administer Redundant Array of Independent Disks (RAID) storage and associated components

• Configure and administer Storage Area Network (SAN) and associated components; including Fibre Channel switch administration

• Configure and administer data restore and disaster recovery

• Configure and administer data backup clients and servers

• Maintain storage aspects of new server integrations, storage allocation, and Change Management

• Setup procedures to consolidate storage of data from different platforms (i.e. Windows, UNIX and LINUX)

• Troubleshoot and fix storage issues

• Perform routine equipment check and preventative maintenance

• Storage analysis, capacity planning and performance planning of storage components

• Document the policies and procedures to support the operational storage environment and participate in the design and ongoing refinement of procedures and policies

• Prepare reports on storage administration best practices, new technologies, etc. and recommend enhancements and configuration changes to improve and optimize storage

• Ensuring the data is accessible and recoverable.

• Developing, implementing and overseeing policies and procedures to ensure consistent storage provisioning, uptime, regulatory compliance and data protection.

• Involve in incident management, change request, service request and change request

Requirements:

• Past working experience in Cloud environment is an advantage

• Able to handle demanding service response and recovery turnaround

• Able to manage daily support tasks to meet stringent SLA requirements

• Excellent scheduling and multitasking skills

• Meticulous and process-oriented

• Good, hard-working attitude with ability to work well under pressure

• Good communication skills English (written, spoken)

• Good analytical skills with ability to work with others to resolve problems.

• Good organization skills, with ability to properly document and track information.

• Preferably with Microsoft Certification and/or ITIL certification.

• Dynamic, customer oriented, experience working in a fast paced environment.

• Good Knowledge of following products will be advantageous:

-Microsoft Azure Stack

-Commvault Backup and Recovery

-Isilon

*Office hour with offsite standby

• Lead production by resolving material problems & software related

• Improve product yield & quality

• Support new product / variation / ECO activities

• Initiative & drive cost reduction issues

• Participate in employee involvement team

• Improve customer satisfaction and reduce linepull / warrantly to meet target

• Special projects

• Modify & debug test software (if applicable)

• Ensure all prints meet the revision

• Establish FA capability in Lab for product to meet level 2 component

• Lead in change management process

• Degree with minimum 2 years’ experience (Electrical Engineering)

• With project management experience in new product start-up (multi-

task)

• Pro-active approach to solve unanticipated process

issue/problems during builds.

• Require constant monitoring on design development or customer

requirement to meet process quality.

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business

Our Training & Simulation Systems business has close to 40 years of experience in delivering innovative learning, training, and simulation solutions to customers in the defence, public safety and security, and enterprise domains. We envision to create a better future together through learning, training, and simulation.

Together, We Can Make A Significant Impact

The software developer is responsible for designing, coding, and maintaining existing C#.NET code for existing and future projects. Participates in the design and planning for new software features or solutions for existing coding problems and challenges.

Be Part of Our Success

• To design, build, and maintain a reusable and robust code using C#.NET for backend services.
• Design and implement database schemas, write complex queries, and optimize SQL database performance.
• To develop and maintain a responsive and user-centric front-end application using React and Javascript.
• Develop and consume RESTful APIs and ensure seamless integration between front-end and back-end systems. Familiarity with gRPC services for high-performance inter-service communication.
• Write unit and integration test to ensure code quality and reliability.
• Contribute to continuous improvement in the team by suggesting and implementing process enhancements.
• Collaborate with cross-functional teams to work closely with product managers, designers, and other developers to translate business requirements into technical solutions.

Qualities We Value

• At least 4 years of experience as a software developer
• Experience in full-stack development
• Knowledge in technologies such as C#.NET and SQL database
• Familiarity with front-end frameworks such as React and Javascript
• Ability to adapt quickly to tackle challenges using problem-solving approach.
• Understanding in Git/Azure DevOps for team collaboration.
• Has a strong interpersonal skill and able to simplify technical concerns for easy understanding between team members.

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits

Job Brief

You will be responsible for designing and deploying Infrastructure network security solutions and Managed Security solutions for our enterprise customers. You will work with a team of security professionals and together, build up Corporate’s Cybersecurity practice. As a project owner, you must be responsible for all technical project deliverables and see your project through from start to finish.

This rewarding role will best suit someone with network experience and the ability to work closely with our engineers to deliver large scale network solutions.

Responsibilities:

• Part of Cybersecurity Team to plan, design and build security defences to protect corporate’s, Telcom Infrastructure and SPTel’s customers’ networks.
• Be the subject matter expert during a cybersecurity incident, work with stakeholders for cyber forensic, prepare the incident report to management.
• Conduct Vulnerability and Risk Assessments of Corporate’s corporate and Telco network, manage deviation approval processes.
• Response to Threat Intelligence alerts and keep abreast of new cybersecurity threats.
• Support and Maintain Corporate’s Cybersecurity assets.
• Implement InfoSecurity Policies for Corporate and Cybersecurity systems.
• Build cybersecurity awareness and capabilities in Corporate.
• Support company ISMS and Cyber Incident Response Team.
• Conduct company-wide Table-top Cybersecurity exercise and Simulation regularly.
• Support regulatory compliance monitoring and reporting.
• Manage and support cybersecurity related projects.
• Be the system owner for security systems and appliances including Firewall, N-IPS, H-IPS, Anti-DDoS system, Server protection and Endpoint protection systems, PAM, Active Directory, TACACS, etc. Prepare MOP and raise Change Requests for system changes, eg. System upgrades, patching, bug fixes.
• Translate and Implement Managed Security Services Solutions according to Product Specifications.
• Conduct POC Testing and technical evaluation for new cybersecurity solutions.
• Supportt the Ops Centre and Tech Ops staffs in Cyber related investigation and trouble-shooting.
• Create Standard Operating Procedures (SOP) for cybersecurity product offerings.
• Create Cyber incidents playbooks and Hardening baseline, review and update regularly.
• Any other ad-hoc duties as assigned by superior from time to time.

Role Requirements:

• Tertiary qualification in Cybersecurity, Computer Science, IT / Engineering or equivalent.
• 3-10 years of experience in IT or Telecommunication Sectors.
• Minimum 2 years of experience in any Cybersecurity Domains.
• Knowledge of vulnerability scoring systems (e.g. CVSSv3, CVSSv4)
• Ability to conduct root cause analysis against vulnerabilities and determine feasible technical solutions.
• Ability to handle large datasets and perform vulnerability analysis, experience on vulnerability management tools is a plus.
• Ability to work alongside other security functions to determine vulnerability scoring and impact.
• Good understand application protocols in context of OSI network layers and technologies not limited to NGFW, WAF, Anti-DDOS, IPS, IDS and etc.
• Good understanding of encryption and tunnelling protocols (IPsec, SSL VPN, TLS, IKE, IKEv2, etc.)
• Professional Certifications such as CEH, CISSP, CCSP, SSCP, CRISC, GCIH, GSEC or equivalent will be an advantage.
• Candidates with Hands-on experience in security products or security domains (security monitoring, incident handling, vulnerability management and etc) will be an added advantage.
• Have a deep and strong knowledge of networking – switching, dynamic routing protocols, static and rule-based routing, etc. Certificate in any networking area is a plus.
• Good analytical, problem and critical thinking skills
• Good oral and written communication skills
• Ability to work collaboratively with cross-function teams. Enjoy working with different stakeholders to achieve desire outcomes.

Job Responsibilities:

• Provide technical expertise support to customers and internal team members
• Responsible on in-house application, customer application and development support
• Involves providing direct technical support to customers at their location.
• Conduct training sessions for customers / internal employees on how to use and maintain the products or services the company provides.
• Provide support to the engineering and quality assurance teams within the organization

Job Requirement:

• Bachelor’s Degree in Material/Mechanical Engineering or equivalent practical experience, Master’s degree will have an advantage
• At least 5 years of experiences in Semiconductor
• Good knowledge of wire bonding operations and concept
• Wire bonding hands-on experience is needed
• Possesses with good presentation skill, DOE skills are essential
• Minimum supervision and should have good communication skill with customers
• Willing to travel to oversea for customer on-site support

About the Role:

• Develop detailed project plans, timelines, and milestones.
• Coordinate with clients, consultants, and contractors to define project scope and requirements.
• Monitor project progress and ensure adherence to schedules and budgets.
• Supervise on-site activities, including lift installation, replacement, and testing.
• Ensure compliance with workplace safety regulations and company standards.
• Manage and guide subcontractors and installers on project execution.
• Review and interpret technical drawings, specifications, and lift layouts.
• Conduct quality checks to ensure installations meet required standards.
• Resolve technical issues or challenges arising during project execution.
• Provide regular updates to clients and management on project status.
• Address client concerns and provide solutions to ensure customer satisfaction.
• Work closely with internal teams such as procurement, logistics, and design.
• Prepare project progress reports, risk assessments, and completion certificates.
• Maintain accurate records of all project activities, including materials and manpower.
• Ensure proper handover of completed projects, including as-built documentation.

About You:

• Minimally a Diploma in Mechanical or Electrical Enigneering or any other relevant discipline
• Has minimally 2 years of experience in lift/escalator installation or replacement projects
• Familiar with lift regulations, codes of practice, and safety standards
• Strong in project management and organizational abilities
• Proficient in AutoCad, MS Project, or similar software
• Workplace Safety and Health (WSH) certification is an advantage
• Relevant lift-specific certifications will be a bonus
• Ability to work independently and lead a team effectively

Why join Cushman & Wakefield?

As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from;

• Being part of a growing global company;
• Career development and a promote from within culture;
• An organisation committed to Diversity and Inclusion

We're committed to providing work-life balance for our people in an inclusive, rewarding environment.

We achieve this by providing a flexible and agile work environment by focusing on technology and autonomy to help our people achieve their career ambitions. We focus on career progression and foster a promotion from within culture, leveraging global opportunities to ensure we retain our top talent. We encourage continuous learning and development opportunities to develop personal, professional and technical capabilities, and we reward with a comprehensive employee benefits program.

We have a vision of the future, where people simply belong.

That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, gender, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status.

We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us.