Asst Project Engineer

• To assist the Senior Project Engineer/Project Manager to conduct kick-off, pre-project/project meetings to ensure team members is clear on the objectives, deliverable, Quality, equipment’s Lead-time, Safety and construction requirements.
• Plan and assist the Senior Engineer to monitor the daily progress of activities to achieve on or before schedule, i.e., by comparing the planned vs actual progress status, identify critical activities.
• Preparation of engineering documents, such as inspection form, testing form and progress reports, updating of completion status.
• Together with the project team prepare the statement/work procedures, RA to specify the detailed work step required for the specific task of the job to be done and identify key risk with the associate risk. A risk mitigation strategy is applied with the whole project construction task.
• Calculate and tracking usage of resources, such as materials and tools with report prognosis to the Senior Project Engineer/Project Manager.
• Understand and evaluate the project requirements and project plans particularly, materials, schedule, equipment and labour loading.
• Assist the Senior Engineer/construction superintendent in assigning tasks to work teams.
• To explain the site situation, technical requirements, project specifications, special engineering requirements, coordination procedures, execution approach and activities priorities to the various work teams to seek contributions for further refinement.
• Ensure that various disciplines (including quality and safety personnel) are carrying out each tasks and tests/inspection in accordance with specification and standards as per the contractual requirements.
• Assist in resolving engineering issues at site, coordinating with the respective engineering support units, if necessary report discrepancy (if any) on labour status, equipment, materials etc. to the Senior Project Engineer/Project Manager.
• Preparation of project close-out report for the Senior Project Engineer/Project Manager to review before submission to clients.
• Ensure final acceptance of the project by client in accordance with contractual requirements

The Rapid Response Damage Assessment (RRDA) program is seeking an Engineer or a Senior Engineer to assist with the modeling and analysis of vessel stability and hull strength for ships and offshore floating structures and verify their compliance with applicable Rules and Regulations.

· The RRDA program provides 24/7 technical assistance to ship and offshore floating structure related emergencies such as grounding and collision. When activated, RRDA is an extension of the vessel management team’s own response capability, focusing on the measure of changes occurring to hull strength, stability and the extent to which risk of pollution can be mitigated. This new position is expected to work along with a group of experienced engineers to respond to client service requests when emergencies occur or participate in routine vessel emergency response drills.

The RRDA work by nature of its complexity and difficulty require the fully competent application of conventional knowledge in a particular field of engineering or science. Through broader and more technically challenging work assignments, the ideal candidate will develop a thorough understanding of policies, methods and procedures.

What You Will Do:

• Under the supervision of an experienced engineer or the RRDA manager, develop analysis models and perform detailed engineering analyses to assess vessel stability and hull strength and verify their compliance with applicable Rules and Regulations.
• Perform work which involves conventional engineering practices but may include complex problems such as the resolution of limited information provided by the client, conflicting client requirements, or time constraints.
• Develop technically accurate and timely reports, and responses to client phone calls, emails and other forms of communication for review by an experienced engineer or the RRDA manager.
• Prepare accurate and timely weekly reports and billing on all work performed.
• Communicate the status of the current workload to all appropriate members of the team to meet the needs of clients.
• Standby for and respond to client service requests on the rotating shift
• May propose technical advice to field operations and other technical offices.
• May propose new approaches to problems encountered and make recommendations for changes in methods, procedures or designs.
• May work directly with clients to identify and resolve problems in the area of technical expertise.
• Work as a team member within the RRDA response team. May work autonomously, once trained, with limited supervision.
• Implements and maintains ABS Quality System requirements relative to responsibilities after undergoing ABS Quality System training.

What You Will Need:

Education and Experience

• B.S. degree in Naval Architecture, Ocean Engineering, Civil or Structural Engineering, or other related disciplines.
• Experience (coursework, research, or industry experience) with vessel stability calculations and ship and/or offshore floating structures is preferred
• Experience with stability software and/or salvage software such as Hecsalv, GHS, or NAPA is a plus.

Knowledge, Skills, and Abilities

• Knowledge of related technical disciplines required.
• The ability to identify, analyze and propose solutions to problems (i.e., the competence to demonstrate complex problem-solving skills).
• Good command of the English language.
• Ability to communicate orally and in writing.
• Ability to work well with others and sometimes within tight schedules

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem-linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the role

You will be part of a cross-functional agile engineering team (squad) responsible to build, deploy and run (support) one or more of our digital products, focusing on full-stack experience to build robust & resilient systems (front-end & back-end).

You will work closely with Engineers, Product, Design, and other stakeholders, collaboratively ensuring quality gets built in the product, get to see your impact in everyday lives of many people, and have great fun while doing it.

You will share your learnings within and beyond your team (squad) and mentor budding engineers for good engineering practices

What will you do

• Working with engineering+product owners to design, refine and develop the product, from concept to implementation.
• Main contributor in creating best in-class product & experience for our customers by designing, building, scaling, and evolving our platforms, services, and tools
• Communicate, collaborate and work effectively across cross functional teams in a multicultural environment
• Mentor a team of highly talented and motivated engineers
• Ensure the performance, security, and responsiveness of applications built
• Continuously improve code quality, product execution, automatization and customer delight

What you need to have

• You have at least 10+ years of professional experience in a similar role developing highly scalable applications
• Good written and spoken English
• Hands on expertise in Java / Javascript or its derivatives (Typescript, NodeJS, Scala, Kotlin, Springboot, etc)
• Have hands on experience on one of this front-end development (Flutter Preferred)
• Experience to Lean/XP practices (TDD, Pair Programming, Continuous Integration/Delivery for both Mobile & Back-end)
• Experience working in Agile Software development
• Communicate, collaborate, and work effectively across distributed teams in a multicultural environment.
• You’re excited about delivering end-to-end experiences and care about your software architecture across the front-end, back-end, and the APIs that glue them together
• A passion for quality and best practices but with a pragmatism that understands the
  balance between perfection and delivering value in a timely manner.
• Enjoys mentoring more junior engineers on good engineering practices & share knowledge

Responsibilities & Duties:

• Provide on-site services for new and existing customers, including equipment servicing and upgrades.
• Conduct technical analysis of product implementations, modifications, and enhancements to products in accordance with specific customer specifications.
• Update customer on the nature of service provided and recommends equipment repairs or system upgrade.
• Troubleshoots technical issues and recommends solution to customer.
• Provides technical analysis of equipment installation, modifications, and upgrade in accordance to customer’s requirements.
• Regular communication with customer to ensure high level of customer satisfaction.
• Duties includes but not limited to equipment installation, servicing, maintenance, repair, and relocation.

Requirements & Skills:

• ITE / Diploma in Electrical or Mechanical Engineering.
• At least 2 years on site experience preferred.
• Experience in Automation and/or Robotics preferred.
• Knowledge and experience in using Solid Works and PLC programming will be an added advantage.
• Good problem solving and communication skill.
• On the job training provided.

Responsibilities & Duties

· Identify and develop potential new customers

· Provide support and further develop existing customers.

· Marketing, promoting and selling of products.

· Provide advice on best solution and product to customers.

· Analyse competitors and market trend.

· Prepare quotations.

· Meeting of sales target and plan.

· Perform other duties as assigned.

Requirements & Skills

· Minimum Diploma in engineering, preferably Robotics and Automation.

· Minimum 2 years of experience in technical sales.

· Strong communication and sales skill.

· Good knowledge of industrial automation systems / equipment.

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

Job Description :

· Incremental improvements/development of software modules

· Analyze customer/production issues and implement solutions within the existing machine application (bug fixing).

· Investigate and implement engineering change requests.

· Testing of new releases by simulating processes and on actual equipment.

· Work with version control tools and issue tracking tool for software release management.

· Creates and maintains engineering documentations relating to software development / bug-fix / feature releases following BESI standards and design rules.

· Ensure fast response to customer and production issues.

· Provides engineering support to assigned R&D/CIT projects.

· Install & (beta) test new software release/fix at customer sites (ability to travel needed)

Requirements :

Education

Bachelor Degree in Electrical or Computer Engineering (Mechatronic) or Software Engineering

Work experience

At least 3 years relevant experience in automation / equipment industries.

Significant practical experience in software engineering and testing (embedded software and HMI environment).

Experience with agile software development processes, quality control and test driven development

Expertise and methodology

Proficiency in Microsoft (C++, VB6) using Microsoft Visual Studio 6.0 and programming language “C” and “C++”.

Knowledge of UML and state machines; State Transition Diagrams

Very good English skills (verbal and written)

Experience with version control in Mercurial / GIT is a pre

Experience with SECS/GEM is a plus

Other requirement criteria

· Good communication skills in a global environment

· Result oriented

· Strong analytical skills

· Team player

· Self-organized, proactive

· Stress resistant

· Affinity with mechatronic systems

· Ability to travel for on-site support (<30%)

Job requirement:

• Ability to perform first level investigation out of control situation and line excursions, abnormal lot/tool judgement due to inline OOC and OOS from SPC Chart.
• Process condition optimization.
• Work closely with equipment and production to ensure key module objectives are met.
• Evaluation to improve process margin.
• Cost reduction projects.
• Ensure safety, discipline and housekeeping compliance by all personnel.
• Analyze different types of defects and provide clear problem description with maintenance counterparts on troubleshooting.

Job requirement:

• Diploma in Electrical/Electronics/Chemistry/Microelectronics/Engineering or equivalent.
• Relevant working experience in Photo Process semiconductor front-end industry
• Willing to work in cleanroom environment.
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Objective:

Provide 24x7 support for all Diffusion Wet Equipment Tools and Issues

Job Description:

• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness..
• Able to coach junior engineers in performing hardware trouble-shooting for daily operations
• Establish Preventive Maintenance (PM) plans for all implant equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Initiate meeting with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives and analyze low yield and WAT issues
• Establish stock levels of essential spare parts and consumables to support equipment maintenance based on forecasted manufacturing volume. Liaise with vendors to minimize / eliminate over-stock or under-stock
• Manage new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production
• Develop continuous improvement and Implement equipment improvement projects to improve equipment efficiency, cost reduction and reliability of equipment
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Set targets, goals, and projects for the section to minimize wafer scrap, equipment cost per wafer, optimize equipment capability and utilization to meet operational needs
• Provide feedback / training to AEs and TAs on their troubleshooting skills, equipment knowledge, decision making, risks assessment
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers
• Self audit and update specifications to meet TS16949 Quality Standard requirements
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager. Help the AE or Engineer on their career path development
• Provide long term solutions to address daily issues. Resolve department hardware chronicle issues.
• Create and maintain implant operation SOP and PM OI
• Develop continuous improvement to enhance equipment reliability and cost of ownership, Able to plan implant cost budget

Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Min 3 years of relevant work experience as Engineer in Diffusion Wet Equipment
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Main Responsibilities:

• Interface with customers on Control System.
• Programming, understand and help customers define their needs.
• Attend all solution related problems on site, troubleshoot and provide technical support to customers as well as resolve technical issues.
• Conduct training to enable users/customers optimizing the graphical user interface.
• Provide necessary testing and debugging to engineering & factory for designing new products/refining existing products.
• Ensure full compliance with all validation issues concerning the product application, controls and documentation.
• Support product warranty claims and quality issue. Update customer complaints system & prepare monthly failure analysis report.
• Actively interact with customers to develop service business to achieve customer satisfaction.
• Collate and maintain project pursuit reports for management’s review and action plan.
• Training and mentorship shall be provided for fresh graduates.

Requirements:

• ITE/ Diploma in Electrical Engineering or equivalent.
• At least 1 years’ experience in similar industry.
• Immediate starter is preferred.
• Possess good communication skill for effective follow-up and attention to details.
• Ability to interact with all levels in a professional & responsive manner.
• Display maturity and able to handle stress.
• Willingness to learn and progress in a fast paced environment.
• Enthusiastic and able to work in a team oriented environment.
• General knowledge of AV products such as Crestron, AMX, QSC, Extron is preferred.
• Other related duties assign by Company from time to time.
• Singapore Citizen or Permanent Resident is preferred.
• Fresh graduates are encourage to apply.

Responsibilities:

• Provide business analysis and process redesign expertise in one or more functional areas (HR, Finance, Transport, Warehouse, Sales etc.) within the enterprise specifically in the analysis and redesign, of SAP and Non-SAP functions and processes.
• Work with business users to identify business requirements and the changes. Assists in the design, coding/configuring and testing of technical solutions of KTC core in-house applications and adheres to coding standards defined by IT.
• Customize SAP functionality to satisfy business requirements and business process design.
• Reviews and edits requirements, specifications, business processes and recommendations related to proposed solution.
• Contribute to corporate decision making by providing accurate, timely and relevant documentation, information and reports appropriate to maintaining awareness of plans and directions of business application systems.
• Liaising with software suppliers on their products and the requirements of business units

Requirements:

• Possess a Degree/Diploma in Computer Science / Information Technology or equivalent.
• Experience in developing, implementing and reviewing business application improvements.
• Must have at least two full lifecycle SAP R/3 implementation experience (Project preparation till go-live).
• Good interpersonal, analytical and problem-solving skills.
• Minimum 2 - 3 years of SAP Implementation experience.

Responsibilities:

• Work closely with business user and software/system architect.
• Gather and analyze requirement from stake holder, including business requirement document.
• Conduct technical feasibility study, analysis requirement specifications to design and architect solutions including developing proof of concepts.
• Translate business requirement into documented technical and data design specification.
• Perform code development, involve in code review, user acceptance testing and sign off.
• Perform implementation, provide post-implementation maintenance support and fine tuning.
• Collaborate with team members to deliver high quality and high-performance .net applications, web and mobile applications.

Requirements:

• Possess a Degree/Diploma in Computer Science / Information Technology (IT,Design) or equivalent.
• Proficient experience with programming language in VB,C# ASP.Net and/or Android, IOS.
• Good HTML5, CSS3, JavaScript, jQuery, Bootstrap responsive web and mobile design.
• Technically proficient with database programming language SQL.
• Demonstrated expertise with MS excel based programming using VBA.
• Experience in SharePoint, Power BI, Power Apps and PHP is an added advantage.
• Technically competent with EDI integration, including web services, Rest API.
• Ability to work under pressure and to tight deadlines.
• Ability to communicate complex concepts.
• Good interpersonal, analytical and problem-solving skills.
• Minimum 2 years of relevant working experience is required

Job Description & Requirements

• Plan, conceptualize, and create mechanical designs for new products
• Develop testing processes, and perform testing and validation of new designs
• Generate working prototypes for beta testing and customer demonstration
• Perform engineering calculations to support design work
• Create and review technical drawings, plans, and specifications using computer software
• Collaborate with multi-disciplinary engineering teams, and work with vendors and contractors
• Perform detailed documentation to track project development and design process
• Ensure project timeline is met and project stays within budget

Job Overview

The world will become more and more intelligent and automated in the future. Are you interested in automation?

UMC will expand production capacity and will build the first 22-nanometer production line in 'Garden City' Singapore. You'll have the opportunity to use your passion and expertise in semiconductors to turn your ideas into world-changing products.

We are looking for automation engineers to join our newly expanded fab in Singapore. You will have the opportunity to lead new technology transfer, new line setup, maintenance, quality and productivity improvements to ensure production runs smoothly.

Responsibilities

• Manage AMHS (Automatic Material Handling system), Sorter and FOUP performance metric
• Lead in AMHS daily operation, maintenance & troubleshooting and vendor liaison
• Create new function or tune system to optimize EQ/system performance
• Interact with various groups such as IT, manufacturing, EQ/Process owner and vendors to minimize downtime and maximize throughput.
• Initiate project management on cost, quality, scope and schedule to ensure timely delivery

Qualifications

• Possess at least a Bachelor in related Engineering (Electrical engineering /mechanical engineering / mechatronics / computer management)
• Possess good communication skills in working as a team
• Is self-demanding and committed to innovative solutions to complete task
• Able to think critically with strong problem solving skills
• Possess prior experience in basic IT infrastructure setup / maintenance / troubleshooting / (mainly windows based IPCs) will be an advantage
• Candidates with relevant AMHS hardware commissioning and maintenance experience may be considered for a senior position

JOB SCOPE & JOB RESPONSIBILITIES

• Drive the creation and refinement of piping layouts, material take-offs (MTOs), and 3D model evaluations for intricate piping systems.
• Analyse stress and vibration data, offering technical expertise and recommendations.
• Collaborate closely with multidisciplinary teams to ensure cohesive project progress.
• Oversee technical specifications, support standards, and material selection to meet project requirement.
• Conduct regular progress assessments and provide strategic recommendations for project requirements.
• Offer technical guidance during contruction and installation phases to ensure successful project outcomes.
• Mentor and guide junior engineers, promoting a culture of quality and efficiency in design.
• Any other duties as assigned by superior.

JOB REQUIREMENT

• Bachelor Degree in Mechanical Engineering or a related field (or equivalent experience).
• At least 10 Years of experience in piping design, stress evaluation, and construction engineering support, including 5 Years in a supervisory capacity.
• Proficient in AutoCAD and 3D modelling tools (eg., Navisworks etc)
• Strong technical knowledge of piping stress/vibration analysia, material selection, and system design.

JOB DESCRIPTION

Commissioning and Trouble-shooting to the all kind of air- con system,(A.C.C.U, A.H.U, F.C.U, SPLI type , WINDOW type , PACKAGE type , AND CHILLER type) check the Electrical wiring diagram to the system.

Overhauling all kind of Compressor to the refrigeration system(Carrier (5f/5h series), Daikin(c55/c58/c74/c75 series),Sabroe(cmo 20, 30 /smc 100/bf series), Bock(f-series), York( ms/mrseries), Carlyle (06ea/06ed series), Bitzer.

Mitsubishi (MS/O6B Series) open type and semi-hermetic type).

Split type air condition installation and troubleshooting.

Package type air condition installation and trouble shooting.

Re-fabricate and modify the piping to the Condenser by brazing method.

Re-fabricate and modify the piping to the Evaporator coil & steam coil by brazing.

Retro-fittings to the refrigeration system as per Environmental free zone Freon gas.

Service report maintains, & Attendant customer feed-back.

JOB REQUIRMENT

Minimum Degree or diploma in Relevant Engineering.

Minimum 10 years of experience on the relevant field.

Must have good communication knowledge.

Must have pervious Singapore experience.

Must able to work in any shift or any timing slot.

Must meet the following criteria:

1)Degree and qualifications in related field.

2)Must be able to speak and understand English so as to communicate with the team members.

3)Must be able to lead a groups of worker.

4)Must be a good leadership.

5)Must be able to coordinate workers and projects.

6)Must be able to work under tight deadlines.

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to analysis of production lines to identify improvement, fostering cross-departmental collaboration for project implementation, and utilizing data analysis for management reporting. It involves optimizing automated production systems for efficiency, supervising personnel and machinery, and ensuring production targets are met.

Key Responsibilities

• Conduct in-depth analysis of production lines and promote cross-departmental cooperation to propose and implement improvement projects.
• Utilize data analysis for effective management reporting.
• Optimize and maintain automated production systems to enhance efficiency.
• Supervise personnel and machinery while driving the achievement of production targets.

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Computer Science, Industrial Engineering or engineering related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

What you will do:

Installs more complex required system field devices and commissioning using standard configuration and commissioning tools. Troubleshoots and resolves problems. Responds to basic warranty calls. Keeps JCI, contractors, and the customer informed of job progress and issues as needed.

How you will do it:

• Responsible for attending to system breakdown calls and carry out scheduled preventive maintenance.
• Coordinate and monitor work progress with the customer and relevant parties for information to expedite installation and supervise sub-contractors work at the site.
• Check and ensure all installations conform to project specifications, and be able to manage system applications, drafting, database generation and commissioning of the systems under your care.
• Perform 24/7 standby duty for complaint and breakdown.
• Ensure safety procedures and conduct during service or repair.

What we look for:

• ITE/Diploma with minimum 1 year’s relevant experience handling preventative maintenance, repair, installation, commissioning, and general servicing activities.
• Service experience in the fire protection field/BMS/Security systems required for this role.
• Willing to standby and back up after office hours
• Willing to learn new things with good attitude.
• Entry level candidate are welcome to apply.

Asst Project Engineer

• To assist the Senior Project Engineer/Project Manager to conduct kick-off, pre-project/project meetings to ensure team members is clear on the objectives, deliverable, Quality, equipment’s Lead-time, Safety and construction requirements.
• Plan and assist the Senior Engineer to monitor the daily progress of activities to achieve on or before schedule, i.e., by comparing the planned vs actual progress status, identify critical activities.
• Preparation of engineering documents, such as inspection form, testing form and progress reports, updating of completion status.
• Together with the project team prepare the statement/work procedures, RA to specify the detailed work step required for the specific task of the job to be done and identify key risk with the associate risk. A risk mitigation strategy is applied with the whole project construction task.
• Calculate and tracking usage of resources, such as materials and tools with report prognosis to the Senior Project Engineer/Project Manager.
• Understand and evaluate the project requirements and project plans particularly, materials, schedule, equipment and labour loading.
• Assist the Senior Engineer/construction superintendent in assigning tasks to work teams.
• To explain the site situation, technical requirements, project specifications, special engineering requirements, coordination procedures, execution approach and activities priorities to the various work teams to seek contributions for further refinement.
• Ensure that various disciplines (including quality and safety personnel) are carrying out each tasks and tests/inspection in accordance with specification and standards as per the contractual requirements.
• Assist in resolving engineering issues at site, coordinating with the respective engineering support units, if necessary report discrepancy (if any) on labour status, equipment, materials etc. to the Senior Project Engineer/Project Manager.
• Preparation of project close-out report for the Senior Project Engineer/Project Manager to review before submission to clients.
• Ensure final acceptance of the project by client in accordance with contractual requirements

Job Description
• Involve in the project or maintenance services related with General Security Systems, Alarms
Systems, CCTV Systems , Access control systems and Server & Network infrastructure and whenever required.
• Perform Installation, Implementation, Configuration and testing of system/storage equipment & setup
• Troubleshoot problems encountered on site
• Perform OS hardening, patching and updating on servers/VM
• Develop implementation plan, migration plan and acceptance test plan for the project.
• Conduct acceptance test with users and address the testing findings/issues
• Work closely with Project/Maintenance Managers in planning the implementation tasks
• Maintain accurate and consistent set of work instructions service delivery processes.
• Develop As-built documentation for handover

Job Requirements
• Candidate must possess at least a Professional Certificate/Nitec, Diploma,
Advanced/Higher/Graduate Diploma, Engineering (Electrical/Electronic/Information
Technology ) or equivalent
• Minimum 2 years’ experience in Operational Technology/Information Technology industry
• Knowledge of networking and IP/TCP protocol
• In-depth knowledge in CCTV, Access Control and System Server etc.
• Hands-on experience in security-related tasks such as OS tightening, patching and updating,
virus scanning will be an added advantage.
• IT Certification in windows system & storage, network, database, virtualization, cloud
technologies will be an added advantage
• Good communication skills and positive working attitude.
• Candidate must possess a Class 3 driving license
• Fresh graduates welcome to apply

What you will do:
As Digital Solution Engineer/ Architect, you will be taking lead on application of digital software to our customer requirements and supporting digital sales specialists to sell the deals with include:

Client Engagement:

• Engage with prospective and existing clients to understand their business objectives, challenges, and technical requirements.
• Conduct discovery sessions to gather detailed information on customer needs, pain points, and success criteria.
• Develop and manage customer technical relationships, identify and expand digital opportunities.

Solution Design & Architecture:

• Develop customized digital solutions that align with client requirements, leveraging Johnson Controls’ digital OpenBlue portfolio, including IoT, AI, and data analytics platforms.
• Create and present high-level architectural solutions that address client needs, ensuring scalability, flexibility, and efficiency.

Technical Support to Sales:

o Qualify opportunities in terms of customer technical requirements and contribute to the Go/No-Go recommendations.

• Collaborate closely with the sales team to provide technical expertise throughout the sales cycle.
• Assist in the preparation of proposals, RFP responses, and presentations, ensuring they are technically accurate and compelling.
• Act as a technical advisor and thought leader to clients during meetings, workshops, and demonstrations.

Internal & External Digital Advocate:

o Enable the branch eco-system on technical aspect of the OpenBlue Solutions.

o Identify & train external partners to expand JCI digital solution business market reach

Product Demonstrations

• Deliver compelling product demonstrations that highlight the value and capabilities of Johnson Controls’ digital solutions.
• Tailor demonstrations to specific client needs, showcasing how our solutions can address their unique challenges

Solution Validation & Product Roadmap:

• Work with internal product teams to validate and optimize solutions for client-specific implementations.
• Provide feedback to product development teams on client requirements and market trends to inform future product enhancements.

Post Sales Activities:

• Support delivery readiness and gathering required documents including Scoping documents, IT approval, technical support during implementation
• Support Customer Kick-off meetings.

Documentation & Training:

• Develop and maintain technical documentation, including solution architectures, integration plans, and client-specific configurations.
• Provide training to sales teams and partners on new digital solutions and architectural best practices.

Industry Knowledge & Trends:

• Stay informed about the latest trends in digital solutions, smart building technologies, and industry-specific regulations.
• Share insights and best practices with clients and internal teams to drive innovation and competitive advantage.

How you will do it:

Technical Skills:

• Strong understanding of digital solutions, including IoT platforms, AI, data analytics, cloud computing, OT Cyber security and smart building technologies.
• Good understanding of building protocols like BACnet, Modbus, OPC, MQTT and other BAS protocols
• Proficiency in architectural frameworks, integration methodologies, and solution design best practices.
• Experience with relevant software and SaaS application in built or industrial environment.

Soft Skills:

• Commercial acumen
• Excellent communication and presentation skills, with the ability to convey complex technical concepts to non-technical audiences.
• Strong problem-solving abilities and a customer-centric mindset.
• Ability to work collaboratively in a cross-functional team environment

What we look for:

• Bachelor’s degree in computer science, Engineering, Information Technology, electronics, instrumentation, communication or a related field. A master’s degree is a plus
• Relevant certifications in cloud architecture, IoT, networking, cyber security or other digital technologies are a plus
• At least 6-7 years of experience in built or industrial environment.
• Minimum of 5 years of experience in a solution architect or presales role, preferably within the digital solutions, IoT, or smart building technology sectors.
• Minimum 3 years of experience in designing or delivering energy efficiency, workplace optimization, Asset Management, Facility management, HVAC optimization or digitization SaaS application in built or industrial environment.
• Proven track record of successfully designing and presenting technical solutions that meet client needs and drive business outcomes.
• Proficiency in APAC local language, Chinese is a plus as this position will require to liase with Chinese speaking customers.

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Job Description:

We are looking for an experienced Electrical, Instrumentation & Control Engineer (EIC Engineer) to manage and execute the design, installation, and maintenance of electrical, instrumentation, and control systems across a variety of projects. The ideal candidate will have a strong background in electrical and control systems engineering, as well as hands-on experience with instrumentation, PLCs, SCADA, and DCS systems.

Key Responsibilities:

• Design & Implementation: Design, develop, and implement electrical, instrumentation, and control systems for industrial projects.
• System Configuration: Configure and program PLC, SCADA, and DCS systems to ensure seamless automation and control.
• Installation & Commissioning: Oversee the installation, commissioning, and testing of electrical and control systems on-site.
• Maintenance & Troubleshooting: Perform preventive and corrective maintenance on electrical, instrumentation, and control systems.
• System Calibration: Calibrate and validate instruments to ensure accuracy and proper functioning.
• Safety Compliance: Ensure all electrical and control systems adhere to safety standards and regulations (IEC, NEC, ATEX, etc.).
• Collaboration: Work closely with cross-functional teams, including electrical engineers, mechanical engineers, and project managers, to meet project deadlines.
• Documentation: Maintain detailed documentation of designs, configurations, test results, and maintenance activities.

Qualifications:

• Education: Bachelor's Degree in Engineering, Instrumentation Engineering, Control Systems, or a related field.
• Experience: Minimum of 1 years of experience in electrical, instrumentation, and control engineering, with a focus on industrial applications.
• Technical Skills:Proficient in the design and configuration of electrical systems.
  Hands-on experience with PLC programming
  
• Problem-Solving: Strong troubleshooting and analytical skills in electrical and control systems.
• Communication: Excellent written and verbal communication skills.
• Certifications: Relevant certifications (e.g., Certified Control Systems Technician) are a plus.

Job Description

· Collaborate with cross-functional teams such as Mechanical Engineers, Test Engineers, Lab Technicians, and Project Engineers to execute ocean basin model testing projects, such as floating offshore wind projects.

· Analyse and comprehend project requirements related to hydrodynamic testing, model instrumentation, and data acquisition.

· Select and implement suitable data acquisition systems, control system design, and develop software architecture specific to ocean model testing needs.

· Develop and maintain application software for new ocean basin test setups and custom test requirements.

· Upgrade existing software systems to accommodate new test protocols or methodologies for ocean model testing.

· Choose appropriate sensors for wave, current, and motion measurements, ensuring seamless integration with control systems and software.

· Create and update documentation, including software designs, changes, user manuals, and standard operating procedures (SOPs) for ocean model tests.

· Upgrade LabVIEW-based software applications to newer versions, ensuring they meet the latest testing requirements.

· Troubleshoot and resolve issues in control systems, data acquisition, and software during model testing.

· Test and validate application software before deployment to the ocean basin test setup.

· Prepare comprehensive user manuals, SOPs, and provide training for test engineers to ensure smooth operation of the test environment.

Job Requirements

· Minimum qualification: Bachelor of Engineering (BEng) / Bachelor of Technology (BTech) in Electronics, Electrical, Instrumentation, or Computer Science with at least 2 years of relevant experience, particularly in LabVIEW.

· Proficiency in different versions of LabVIEW, including the latest versions with relevant toolkits.

· Experience in designing and developing NI LabVIEW-based data acquisition and control systems for ocean basin model testing or similar environments.

· Proven ability to develop modular and scalable applications using LabVIEW?s standard architecture.

· Experience in developing LabVIEW applications for Windows and Real-Time (RT) Linux environments.

· Proficiency in integrating NI hardware systems such as PXI, cRIO, and CompactDAQ into the testing framework.

· Hands-on experience with communication protocols like TCP/IP, UDP, Serial, USB, CAN, and EtherCAT for testing and control purposes.

· Experience with integrating third-party programmable instruments (e.g., multimeters, power supplies, oscilloscopes) and controllers into ocean testing setups.

· Experience in developing NI software drivers for third-party hardware and integrating third-party software with LabVIEW.

· Knowledge in selecting, wiring, and troubleshooting sensors used in hydrodynamic and ocean model testing (e.g., pressure sensors, accelerometers, flow meters).

· Experience in reading control panel schematics, designing control systems, and selecting appropriate control panel hardware for model testing.

· Strong team player with the ability to work independently and collaborate in cross-functional project teams.

· Experience interfacing induction motors with VFDs and control systems, with knowledge of VFD configuration for use in testing environments.

· Strong troubleshooting skills at the signal and system level for data acquisition and automated test systems.

· Excellent documentation skills for capturing test requirements, preparing software designs, and writing user manuals.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.