Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies.

We are seeking a Senior Engineer with system integration expertise with design oversight to join our team. As a vital member of our team, you will be involved in the design, development, and testing of medical devices, ensuring compliance with regulatory standards and industry best practices.

Your role will involve collaborating with cross-functional teams to create innovative solutions encompassing hardware, software and chemistry by conducting verification and validation activities, and providing technical support throughout the product lifecycle.

The ideal candidate will have a solid understanding of system integration principles, best practices in verification and validation testing, and knowledge of medical device regulations (such as ISO 13485).

Join our dynamic team and contribute to the development of cutting-edge medical devices that improve patient care and well-being.

Job Roles and Responsibilities:

• Develop high-level system architectures that meet user requirements while considering design feasibility.
• Ensure that all system components are compatible and can be integrated seamlessly.
• Design and implement integration strategies and validate the functions as intended while adhering to design principles.
• Lead collaborative teams for the design, implementation, and validation while is capable to perform hand-on testing independently if required to complete engineering or verification studies.
• Lead creating innovative solutions that align with both technical specification and user needs for medical products.
• Coordinate between design, engineering, assay, project manager, and other disciplines to ensure cohesive product development.
• Author or oversee the writing of protocols and reports.
• Foster collaboration among team members to address challenges from both a technical and design perspective.
• Creating and maintaining technical documentation, including design specifications, test protocols, and reports, ensuring compliance with regulatory requirements such as ISO 13485.

Job Requirements:

• Experience in system integration and innovation.
• Bachelor’s degree in Engineering, Design or equivalent engineering or science background.
• Comfortable with navigating uncertain situations without clear guideline.
• Adaptability to changing work conditions and project requirements.
• 5-10 years’ experience in cross-functional product development roles and completed one full product development cycle.
• Track record in working effectively with diverse teams, including engineering, design, and marketing.
• Strong interpersonal skills to facilitate communication between technical and non-technical stakeholders and ability to summarize and communicate complex problems in simple terms.
• Strong analytical skills to troubleshoot integration issues while considering design implications.
• Able to break down complex system in simple steps and identify interfaces between modules and generate system diagrams, workflows and reports.
• Curious and proactive approach to gather information necessary for decision-making.
• Knowledge of statistical tools for data analysis such as (Python/Matlab/Origin/LabView) will be a strong advantage.
• Experience with design software. Experience with CFD simulation software such as ANSYS is advantageous.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

• To assist the engineers to sustain and improve all equipment performance indices to meet operations goals.
• Perform shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled equipment preventive maintenance (PM), calibration and troubleshoot equipment-related problems on a timely basis to minimize equipment downtime
• Assist engineers in the installation and hook-up of new equipment
• Perform task with zero error
• Prepare consumables/preventive maintenance parts to ensure adequate provision
• Participate in continuous improvement programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Assist in implementing process improvement projects
• Ensure good housekeeping and safety practices in the Fab
• Safe custody of tools, equipment and other properties belonging to the Module
• Assist new associate engineers on their on-the-job-training (OJT) by acting as their buddy

Requirements:

• Diploma in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology or equivalent
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Good Team Player
• Good Problem-Solving skills
• Able to perform 12-hour rotating shift

About Bruker:

Bruker is enabling scientists to make breakthrough discoveries and develop new applications that improve the quality of human life. Bruker’s high performance scientific instruments and high value analytical and diagnostic solutions enable scientists to explore life and materials at molecular, cellular, and microscopic levels. In close cooperation with our customers, Bruker is enabling innovation, improved productivity, and customer success in life science molecular and cell biology research, in applied and pharma applications, in microscopy and nanoanalysis, as well as in industrial applications. Today, worldwide more than 8500 employees are working on this permanent challenge at over 90 locations.

Today, worldwide more than 9700 employees are working on this permanent challenge at over 90 locations on all continents. Bruker continues to build upon its extensive range of products and solutions, its broad base of installed systems and a strong reputation among its customers. Being one of the world's leading analytical instrumentation companies, Bruker is strongly committed to further fully meet its customers’ needs as well as to continue to develop state-of-the-art technologies and innovative solutions for today's analytical questions.

Bruker - Innovation with Integrity.

Please visit www.bruker.com.

Bruker Singapore is seeking for a Field Service Engineer within the service organization. He/She is an ambassador of Bruker Nano Surfaces Metrology (BNSM) instrumentation and technology. Bruker Nano Surfaces Metrology manufactures the world's leading Atomic Forces Microscopes, Stylus profilers, Mechanical Testers, X-Ray Diffractometer and non-contact 3D optical microscope instrumentation. This technical role responsible for customer direct post-sale instrumentation and application support including: installation, user and application training, instrument diagnostics/fix, and post-sale applications support. Individual must be customer focused with a strong technical background enabling our customers to maintain their instrument at peak performance and maximize productivity for their intended use case.

SUMMARY OF RESPONSIBILITIES:

• Performs site surveys, pre-installation, installation of Bruker Semiconductor Metrology Tools (AAFM(NanoMet), AFMi, TSOM & X-ray) for customers both domestic and international
• Provide high level technical support to external customers at their location
• Provide on-­site training to the customers
• Interface with cross functional work teams such as field applications, customer support/services, product management, manufacturing and marketing/sales
• Develop Service technical documentation
• Create, develop, and continuously improve the customer support & applications knowledge database
• Timely and professionally handle field service calls and issues arising from the field service
• Performs basic applications support of Bruker Semiconductor Metrology Tools for customers both domestic and international
• Visits, triage with field applications scientists as appropriate
• Timely complete and submit all required paperwork
• Flexible schedule to accommodate our customer’s needs
• Effectively handle multiple priorities, organize workload, and meet deadlines
• Communicate with the customer to ensure satisfaction and implement any necessary corrective actions
• Up to 30% traveling required within Southeast Asia (at times with short notice)
• Misc. other duties commensurate with the capabilities of a Field Service Engineer

ESSENTIAL FUNCTIONS:

• 90% Technical support (Diagnostics/troubleshooting/on-site/phone/e-mail/web-ex/SAP RMAs, etc.)
• 10% Knowledge database development, delivery of training, basic application support and Escalation support (technical analysis, cross-functional engagement, plan of action, on-site support, etc…)

ADDITIONAL RESPONSIBILITIES:

• Pre-sales support
• Other duties as assigned

EDUCATIONAL/EXPERIENCE REQUIREMENTS:

• Bachelor’s degree or equivalent technical qualifications in electrical/ mechanical engineering or physical sciences. Masters or higher-level education is preferred. Metrology experience within Semiconductor Market an advantage.
• Working knowledge of MS Office, Excel. Working knowledge and ability to test and troubleshoot mechanical, electrical analog and factory Automation
• Up to 5 years of relevant Semiconductor industry experience, preferably metrology products and with hands on instrument experiences.
• AAFM, AFM and X-ray service experience or background in Technical Support preferred.

Interested candidates, please apply via Bruker's career portal directly : https://bit.ly/48OlAj5

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span industries and geographical regions; and our focus is to engage in the dynamics of our customers’ vertical markets; including financial services, TMT (telecommunications, media and technology), education, healthcare, retail, government, manufacturing and professional services, and apply the skills of our 6,500 employees in modernising key digital pillars; data centre and cloud services, security and network infrastructure, workspace communications and collaboration, data and information strategies, and IT operation modernisation.

We are the advocates for our customers for some of the world’s leading technology companies including Cisco, HPE, IBM, CA Technologies, NetApp, Microsoft, Oracle, VMware and ServiceNow.

The Logicalis Group has annualised revenues of $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4.3 billion.

Summary of Position

The Enterprise Senior Networking engineer is a technical implementation role who will focus on delivering Enterprise Networking Technologies Data Centre, Wireless Routing & Switching, Software Defined solutions to new and existing customers.

The position will be a critical member of the Service Delivery team who designs and builds new Infrastructure. This role will work directly with customers to capture business requirements, share best practices, make recommendations, document the optimal design, provide trainings and build the approved solution.

This role may also support business development activities by providing demos or POV for the mentioned technologies below.

Responsibilites:

• Designing and implementing network and security solutions: Responsible for designing and implementing network and security solutions for clients, which may involve configuring routers, switches, wireless, load balancers and other network devices. Racking and Stacking network devices. Expected able to handle mid-sized to mega-sized project.
• Troubleshooting network and security issues: Responsible for diagnosing and resolving network and security issues that arise for clients while deploying, which may involve investigating connectivity problems, configuration issues, and analyzing network traffic.
• Client management: Responsible for building and maintaining relationships with clients, managing their expectations, and ensuring their needs are met.
• Collaboration with other teams: Working closely with other teams such as project managers and Operations team to ensure the network delivery is completed within the stipulated time.
• Technical Documentation: Responsible for creating technical documentation such as Low-Level Design, TDS, As-built, UAT and SAT documents. Signoff all the documents from clients for the project closure.
• Knowledge Transfer: Responsible for providing handover the project to Client and internal operations team.
• Provide guidance and mentorship: Conduct knowledge sharing sessions to keep the team updated on the best practices.

Requirements:

• Possess at least a Diploma, Bachelor's Degree, or Professional Degree in Computer Science/Information Technology or equivalent
• Minimum 5-10 years of experience in network design/deployment.
• Excellent knowledge in Routing and switching, eg. BGP, OSPF, Multicast, VSS, spanning tree, MPLS L3VPN.
• Experience in wireless. Cisco WLC, Aruba, Prime, MSE/CMX, DNAC, Ekahau Site Survey tool
• Data centre technologies, eg. Cisco Nexus VDC, VPC, FEX, VXLAN, ACI.
• Good knowledge of Firewall technologies eg. IPSEC VPN, SSL VPN, IPS/IDS, Cisco ASA, Firepower, Fortigate,
• Good knowledge in network access control(NAC) product, eg Aruba Clearpass Policy Manager, Cisco ISE.
• Excellent interpersonal & communication skills
• Current CCNP qualified with related professional experience, CCIE would be an advantage.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernising key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernisation.

Logicalis Group has an annualised revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

As we continue to grow as a business, our people are our key differentiator with our competitors, and developing and retaining our talent is a key priority for all of our businesses. We will recommend that you watch this short video with input from our employees around the world.

Job Summary:

We are currently looking for a Senior Security Project Engineer to join our Professional Services Team delivering Security Projects encompassing predominantly NAC, Firewall, PS and MFA solutions. Qualified candidate is expected to have hands-on experience in delivering such solutions. This role presents itself with considerable learning opportunities on the state-of-the art security technologies.

Accountabilities:

• Develop low level design document for the project delivery detailing the scope with the sensible technology write up.
• Participate in Internal/Customer meetings to develop the LLD document.
• In-depth technical knowledge and good working experience in implementing and supporting Cisco ISE and HPE Aruba ClearPass NAC solutions.
• Prepare UAT document and perform UAT as per document.
• Understanding of Windows Active Directory and Integration with NAC Solutions
• Proficient with hands-on experience delivering Firewall migrations and fine-tuning Firewall/IPS policies.
• Ability to deliver MFA Solutions for specific use case requirements.
• Assist in reviewing Technical Design Specifications (TDS) document for security projects
• Proactively participate in maintaining internal knowledgebase sharing technical findings within the Team.

The Individual and their Experience:

• Network Access Control (dot1x) experience of Cisco ISE and HPE Aruba ClearPass (Mandatory).
• Firewall Migration expertise across multi-vendor platforms- Cisco ASA/FTD, Palo Alto, Fortigate, Checkpoint.
• Hands on experience Cisco FirePower NGIPS.
• Basic understanding of Networking – Routing and Switching Protocols.
• Ability to manage medium to large size project and ensure completion within the projected timeline.
• Build customer relationship to manage the projects in a congenial way.
• Team Player highly spirited, sharing project experience with peers.
• Able to learn and adopt new skills when projects warrant based on the relevant training provided.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Job Responsibilities:

•Lots handling, WAT analysis and process optimization

•Device development, Yield trouble shooting and reliability improvement

•Fab transfer & Customers handling

•Customized structure process integration development

• To be responsible for helping to drive leading edge process/device development and optimization of devices in order to meet scaling, performance, reliability, and manufacturability requirements.

• Identify and solve IC process and device problems

Job Qualification

•Bachelor degree or above in Materials Science, Electrical Engineering, Chemical Engineering, Mechanical Engineering, Physics, Chemistry or a related engineer discipline.

• 5+ Years Experienced Process Engineering

• Fab 12" knowledge is preferred

• Knowledge of Statistical Process Control (SPC) and/or Design of Experiments (DOE) principles

•Good communication skills, be able to work within cross-functional teams, including internal and external partners

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Etch diverse team of talent. You will be responsible to manage the integration of all modules' processes and the respective derivatives.

What you will be working on:

• Responsible for new Process Development and/or Process Transfer
• Process optimization for Yield and Productivity improvement
• Troubleshoot and resolve Process related issues
• Sustain and/or improve Process Capability, CpK
• Qualify and release tools for required MFG capacity
• Qualify alternate sources for Cost improvement
• Plan and execute Engineering Projects
• Continuous improvement through participation in 10k idea, LSS & BKM to create cost effective and robust processes with quality
• Setup, monitor and maintain SPC charts
• Adhere and complete necessary documentation

More about you:

• Bachelor Degree in Engineering / Science or equivalent
• 1-3 years relevant experience in Semiconductor manufacturing environment
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span industries and geographical regions; and our focus is to engage in the dynamics of our customers’ vertical markets; including financial services, TMT (telecommunications, media and technology), education, healthcare, retail, government, manufacturing and professional services, and apply the skills of our 6,500 employees in modernising key digital pillars; data centre and cloud services, security and network infrastructure, workspace communications and collaboration, data and information strategies, and IT operation modernisation.

We are the advocates for our customers for some of the world’s leading technology companies including Cisco, HPE, IBM, CA Technologies, NetApp, Microsoft, Oracle, VMware and ServiceNow.

The Logicalis Group has annualised revenues of $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4.3 billion.

Summary of Position

The Enterprise Networking engineer is a technical implementation role who will focus on delivering Enterprise Networking Technologies Data Centre, Wireless Routing & Switching, Software Defined solutions to new and existing customers.

The position will be a critical member of the Service Delivery team who designs and builds new Infrastructure. This role will work directly with customers to capture business requirements, share best practices, make recommendations, document the optimal design, provide trainings and build the approved solution.

This role may also support business development activities by providing demos or POV for the mentioned technologies below.

Responsiblities:

• Implementing network and security solutions: Responsible for implementing network and security solutions for clients, which may involve configuring routers, switches, wireless, load balancers and other network devices like Aruba. Racking and Stacking network devices. Expected to handle small to mid-sized project.
• Troubleshooting network and security issues: Responsible for diagnosing and resolving network and security issues that arise for clients while deploying, which may involve investigating connectivity problems, configuration issues, and analyzing network traffic.
• Client management: Responsible for building and maintaining relationships with clients, managing their expectations, and ensuring their needs are met.
• Collaboration with other teams: Working closely with other teams such as project managers and Operations team to ensure the network and security delivery is completed within the stipulated time.
• Technical Documentation: Responsible for creating technical documentation such as Low-Level Design, TDS, As-built, UAT and SAT documents. Signoff all the documents from clients for the project closure.
• Knowledge Transfer: Responsible for providing handover the project to client and internal operations team.

Requirements:

• Possess at least a Diploma, Bachelor's Degree, or Professional Degree in Computer Science/Information Technology or equivalent
• Minimum 1-5 years of experience in network design/deployment.
• Excellent knowledge in Routing and switching, eg. BGP, OSPF, Multicast, VSS, spanning tree, MPLS L3VPN.
• Experience in wireless. Cisco WLC, Aruba, Prime, MSE/CMX, DNAC, Ekahau Site Survey tool
• Data centre technologies, eg. Cisco Nexus VDC, VPC, FEX, VXLAN, ACI.
• Good knowledge of Firewall technologies eg. IPSEC VPN, SSL VPN, IPS/IDS, Cisco ASA, Firepower, Fortigate,
• Good knowledge in network access control(NAC) product, eg Aruba Clearpass Policy Manager, Cisco ISE.
• Excellent interpersonal & communication skills
• Current CCNA/CCNP qualified with related professional experience, CCIE would be an advantage.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span industries and geographical regions; and our focus is to engage in the dynamics of our customers’ vertical markets; including financial services, TMT (telecommunications, media and technology), education, healthcare, retail, government, manufacturing and professional services, and apply the skills of our 6,500 employees in modernising key digital pillars; data centre and cloud services, security and network infrastructure, workspace communications and collaboration, data and information strategies, and IT operation modernisation.

We are the advocates for our customers for some of the world’s leading technology companies including Cisco, HPE, IBM, CA Technologies, NetApp, Microsoft, Oracle, VMware and ServiceNow.

The Logicalis Group has annualised revenues of $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4.3 billion.

Summary of Position

The Enterprise Senior Networking engineer is a technical implementation role who will focus on delivering Enterprise Networking Technologies Data Centre, Wireless Routing & Switching, Software Defined solutions to new and existing customers.

The position will be a critical member of the Service Delivery team who designs and builds new Infrastructure. This role will work directly with customers to capture business requirements, share best practices, make recommendations, document the optimal design, provide trainings and build the approved solution.

This role may also support business development activities by providing demos or POV for the mentioned technologies below.

Responsibilites:

• Designing and implementing network and security solutions: Responsible for designing and implementing network and security solutions for clients, which may involve configuring routers, switches, wireless, load balancers and other network devices. Racking and Stacking network devices. Expected able to handle mid-sized to mega-sized project.
• Troubleshooting network and security issues: Responsible for diagnosing and resolving network and security issues that arise for clients while deploying, which may involve investigating connectivity problems, configuration issues, and analyzing network traffic.
• Client management: Responsible for building and maintaining relationships with clients, managing their expectations, and ensuring their needs are met.
• Collaboration with other teams: Working closely with other teams such as project managers and Operations team to ensure the network delivery is completed within the stipulated time.
• Technical Documentation: Responsible for creating technical documentation such as Low-Level Design, TDS, As-built, UAT and SAT documents. Signoff all the documents from clients for the project closure.
• Knowledge Transfer: Responsible for providing handover the project to Client and internal operations team.
• Provide guidance and mentorship: Conduct knowledge sharing sessions to keep the team updated on the best practices.

Requirements:

• Possess at least a Diploma, Bachelor's Degree, or Professional Degree in Computer Science/Information Technology or equivalent
• Minimum 5-10 years of experience in network design/deployment.
• Excellent knowledge in Routing and switching, eg. BGP, OSPF, Multicast, VSS, spanning tree, MPLS L3VPN.
• Experience in wireless. Cisco WLC, Aruba, Prime, MSE/CMX, DNAC, Ekahau Site Survey tool
• Data centre technologies, eg. Cisco Nexus VDC, VPC, FEX, VXLAN, ACI.
• Good knowledge of Firewall technologies eg. IPSEC VPN, SSL VPN, IPS/IDS, Cisco ASA, Firepower, Fortigate,
• Good knowledge in network access control(NAC) product, eg Aruba Clearpass Policy Manager, Cisco ISE.
• Excellent interpersonal & communication skills
• Current CCNP qualified with related professional experience, CCIE would be an advantage.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a EQUIPMENT ENGINEER to be paart of our ETCH DEPARTMENTdiverse team of talent. You will be responsible for equipment preventive maintenance and equipment performance indices.

What you will be working on:

• Establish systems/guidance in sustaining and improving all equipment performance indices to meet operations goals.
• Perform shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production when requested.
• Perform scheduled equipment preventive maintenance (PM), calibration and troubleshoot equipment-related problems on a timely basis to minimize equipment downtime.
• Conduct installation and hook-up of new equipment.
• Perform task with zero error.
• Establish work procedures, corrective actions and preventions
• Oversee the preparation of consumables/preventive maintenance parts to ensure adequate provision.
• Participate in continuous improvement programs to improve productivity and output quality of the Module, and constantly monitor and feedback to the team to improve performance of equipment to meet Module objectives.
• Assist in implementing and managing process improvement projects.
• Ensure good housekeeping and safety practices in the Fab.
• Safe custody of tools, equipment and other properties belonging to the Module.
• Initiate, organize, develop and lead task-force for short term problem solving and long term continuous improvement.

More About You:

• Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics or equivalent
• 2-5 years semiconductor wafer fab experience as an Equipment Engineer
• Engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Familiar with TEL Unity DRM/ ME+ Platform and Dry Strippers
• Good Team Player
• Good Analytical & Problem-Solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer to be part of our Photolithography Equipment diverse team of talent.

What you will be working on:

• To assist the engineers to sustain and improve all equipment performance indices to meet operations goals.
• Perform shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production.
• Perform scheduled equipment preventive maintenance (PM), calibration, troubleshooting and monitoring of equipment-related problems on a timely basis to minimize equipment downtime.
• Assist engineers in the installation and hook-up of new equipment.
• Perform task with zero error.
• Prepare consumables/preventive maintenance parts to ensure adequate provision.
• Participate in continuous improvement programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives.
• Assist in implementing process improvement projects.
• Ensure good housekeeping and safety practices in the Fab.
• Safe custody of tools, equipment and other properties belonging to the Module.
• Assist new associate engineers on their on-the-job-training (OJT) by acting as their buddy.

More about you:

• Diploma in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology or equivalent
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Experience in TRACK ACT8/Mark8
• Good Problem-Solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span industries and geographical regions; and our focus is to engage in the dynamics of our customers’ vertical markets; including financial services, TMT (telecommunications, media and technology), education, healthcare, retail, government, manufacturing and professional services, and apply the skills of our 6,500 employees in modernising key digital pillars; data centre and cloud services, security and network infrastructure, workspace communications and collaboration, data and information strategies, and IT operation modernisation.

We are the advocates for our customers for some of the world’s leading technology companies including Cisco, HPE, IBM, CA Technologies, NetApp, Microsoft, Oracle, VMware and ServiceNow.

The Logicalis Group has annualised revenues of $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4.3 billion.

Job Summary

The Senior Network Operations Engineer is an Operations role whom will focus on SLA driven Level 3 Incident Management which encompasses responding and resolution of Network, Wireless, Security Infra related issues. The position will be a critical member of the Operations team whom are the higher level and Sev 1 n 2 escalations to diagnose and troubleshoot fault incidents. This role will work directly with customers to gather the fault symptoms and provide the resolution or work around and share best practices, make recommendations, document the issues, provide root cause incident reports. The job scope includes extensive support to client network support team to perform activities in network health check, wireless testing, user issues, break fix, preparing Incident root cause reports.

Responsibilities:

• Understand the process and practices related to GNC support Templates and Standard Operating Procedures
• Perform IOS upgrades and patches to fix software and ensure that the environment is bug/vulnerable free by keeping system with up to date software.
• Troubleshoot production issues and network problems to fix any user related issues and work with principal vendors and customer to provide the resolution with in the proposed timelines.
• Field engineer responsible for handling support issues on Enterprise Networking Platforms and Solutions related to Routing, Switching, Wireless, NAC, Security. Includes Vendors such as Cisco / Aruba / Fortinet / Riverbed / Palo Alto / F5 etc
• Under take escalation for Enterprise Networking related matters from level 1 helpdesk engineers, perform level 3 on site troubleshooting and hardware field replacement works for Enterprise Networking Solutions.
• Be part of a team of engineers that performs 24 hours standby duties on a rotational basis.
• Responsible for updating technical documentations for configuration changes made via helpdesks and/or managed services customers.
• Responsible for opening and closing of support tickets when applicable and providing timely updates to helpdesk personnel and customer for support cases that has been allocated to you
• Work closely with various team of engineers for troubleshooting in relation to Enterprise Networking incidents.

Qualifications:

• Minimum 5 years of relevant experiences in network operations including network, wireless, security technologies.
• Hands on experience in fixing user issues in production environment is essential
• CCNA/CCNP/CCIE certified plus any other networking certifications preferred
• Strong understanding about Enterprise Networking Solutions such as VSS,
• VPC, Multicast , MPLS etc..
• Ability in performing local / remote IOS upgrades on different products and RMAs for faulty devices in production

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Job Responsibilities :

• Communicate, coordinate, and integrate department resources to enhance efficiency and achieve departmental goals and objectives.

• Oversee team member assignments, manage project scheduling, and track project progress to ensure timely and successful completion.

• Implement cost control measures and optimize resource allocation to maximize department performance.

• Foster team development through targeted training and mentorship programs, ensuring the success and growth of team members.

Job Qualification

• Master’s degree in a related field, such as Chemistry, Chemical Engineering, or Material Science.

• Over 5 years of relevant work experience.

• Strong knowledge of 12-inch semiconductor diffusion processes, including furnace, ion implantation, and Wet Bench System.

• Proven ability to identify, assess and solve problems

• Analytical with good interpersonal skills

• Team leader with execellent communication/coordination skill.

Job Duties

• Capacity planning and management.

• Tool Productivity improvement.

• Capital investment evaluation and control.

• Fab space layout planning.

Job Qualification

• Bachelor degree or above in Industrial Engineering, Business, or related engineering field is required.

• 5+ years of experience in Fab

• Global mindset, Self-motivated, high personal standard,

• Strong analytical and problem-solving skills.

• Programming skills, knowledge about IC process and logistic flow are preferred.

The New Product Introduction (NPI) process engineer will provide Dermcut Medical Pte Ltd with technical support and operating knowledge for our medical device operation. This role will conduct critical engineering functions such as product validation, troubleshooting, identifying and implementing process improvements.

The engineer will work closely with project manager and is in charge of taking the prototype from pilot scale into full scale manufacturing in support of commercial efforts. This position will focus on developing various processes and implementing those to support mass production.

Primary Responsibilities

• Establish processes based on product specifications.
• Develop control plans, gage repeatability & reproducibility, test method verification & validation, and pFMEA.
• Identify areas of process improvement to reduce and minimize process related nonconformance incidents and to maximize efficiency of the process.
• Co-ordinate the generation of dossier including but not limited to design files, technical files and project files to include design outputs, shelf-life studies, biocompatibility, sterilisation, risk analysis, validation master plans, IQ's, OQ's, PQ's and test regimes.
• Responsible for screening and optimization of process parameters to achieve robust and stable processes and maximize yields, efficiencies and process capabilities.
• Perform other related duties and responsibilities as assigned.

Education / Experience Requirements

• Bachelor’s degree in process engineering or similar qualification.
• A minimum of 2 years’ experience in the medical device industry.
• A strong understanding of validation strategy (IQ/OQ/PQ), support protocols and reports.
• Experience in root cause analysis of technical discrepancies/abnormalities.
• Familiar with FDA documentation requirements, ISO 13485 quality management system, lean manufacturing, and good manufacturing practice.
• Experience with SolidWorks and Microsoft Project preferred.

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Assist in the development and training of computer vision models using state-of-the-art machine learning techniques.
• Work with large datasets for model training.
• Collaborate with engineers to implement and fine-tune models, focusing on performance, accuracy, and scalability.
• Contribute to the deployment and monitoring of trained models in production environments, ensuring robustness and reliability.
• Participate in the development and maintenance of MLOps pipelines, automating the process of model training, deployment, and monitoring.
• Conduct research to explore and implement the latest computer vision and MLOps techniques and technologies.
• Maintain and update model pipelines, ensuring they meet project requirements and deadlines.

Qualifications

• Bachelor’s degree in Computer Science, Data Science, Artificial intelligence, Mathematic, Electrical Engineering, or a related field.
• Solid understanding of machine learning concepts, particularly neural networks and their applications in computer vision (e.g., convolutional neural networks, transfer learning, and deep learning architectures).
• Proficient in one or more popular machine learning frameworks such as TensorFlow, PyTorch, or similar.
• Experienced with computer vision libraries like OpenCV, scikit-image, or equivalent.
• Strong programming skills in Python, with expertise in using tools like NumPy, Pandas, and Matplotlib for data manipulation and visualization.
• Knowledge of data preprocessing techniques, including image augmentation, normalization, and resizing.
• Basic understanding of MLOps practices, including version control, continuous integration, and continuous deployment (CI/CD).
• Strong analytical and problem-solving skills with attention to detail.
• Good communication skills, both written and verbal, with the ability to work collaboratively in a team environment.
• Eagerness to learn and adapt to new tools and technologies in the rapidly evolving fields of machine learning, computer vision, and MLOps.
• (Optional) Experience with cloud platforms like AWS, GCP, or Azure is a plus.
• (Optional) Knowledge of Docker or other containerization tools for model deployment.
• (Optional) Familiarity with MLOps tools like MLflow, Kubeflow, or similar is a plus.

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Pay: $4,500.00 - $7,000.00 per month

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary

Work Location: In person

Engineer - Analog / RF Design [Radio System Solutions]

Job Description:

• Design of RF/Analog/Mixed-signal IC circuit blocks / IPs based on specifications (performance, area, power consumption).
• Realize IC layout with floor planning and performance considerations (with layout engineers).
• Testing & Debugging of IC prototypes (with system verification engineers).
• Support of IC to mass production ready.
• Continual support / debug of field related issues or customer IC rejects.
• IC design and performance documentation.

Requirement

• Bachelor's Degree / Master’s Degree in EEE (major in IC Design).
• Knowledge of RF/analog designs through final year project and internship are an added advantage.
• Training will be provided.

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the team

Radio System Solutions Division develops standalone RF-IC or IPs for wireless communication products within MediaTek. This involves designing and verification of building blocks such as low-noise amplifiers, power amplifiers, filters, data-converters, phase-locked loops, low-dropout regulators and digital calibration circuits in advanced semiconductor processes. We are looking for a passionate talent who always up for challenges to join us for this exciting career journey!

In MediaTek, we believe technology changes lives and a changed life can change the world.

Joint us - Tomorrow built by you.

Project Overview

We are hiring research engineers interested in advancing the state of the art in data-efficient machine learning at SMART in the new program: Mens, Manus and Machina: How AI empowers people and the city in Singapore (M3S).

With the recent emergence of large language models (LLMs), the research engineers will assist in investigating how data-efficient and resource-efficient techniques, such as data attribution, data selection/reweighting, data valuation, data curation, Bayesian optimization, active learning, can be applied in the context of LLMs (as well as important issues involving AI privacy, model auditability and updatability).

Responsibilities

• Research on topics related to data-efficient machine learning, such as data attribution, data selection/reweighting, data valuation, data curation, Bayesian optimization, and active learning, in the context of LLMs.
• Investigate how these concepts as well as important issues involving AI privacy, model audibility, and updatability can be applied in the context of LLMs.
• Develop, implement, and evaluate experiments to characterise the feasibility and performance of the proposed research ideas.
• Collaborate with other PhD and undergraduate students to publish research results in top-tier conferences and journals, with focus on venues associated with the above-mentioned areas .

The research engineer will be jointly advised by Prof. Daniela Rus (MIT CSAIL), Prof. Alex 'Sandy' Pentland (MIT Media Lab), and Assoc. Prof. Bryan Low (NUS School of Computing), and based at SMART (Singapore-MIT Alliance for Research & Technology) in Singapore. The research engineer will have the opportunity to collaborate with PhD and undergraduate students, as well as Postdoctoral Fellows, within our research groups.

For more information on our research group and interests, visit

https://danielarus.csail.mit.edu/

https://www.media.mit.edu/people/sandy/overview/

https://www.comp.nus.edu.sg/~lowkh/research.html

Requirements

• Degree or Masters Degree in Computer Science, Machine Learning, Artificial Intelligence, or other related disciplines.
• Strong publication record at premier AI/ML venues such as ICML, ICLR, NeurIPS, CVPR, ACL, EMNLP or similar.
• Strong proficiency in programming.
• Strong proficiency in English and communication skills.
• Experience with machine learning and deep learning frameworks such as Pytorch, Tensorflow, among others.

To apply, please visit our website at: https://portal.smart.mit.edu/careers/career-opportunities

Interested applicants are invited to send in their full CV/resume, cover letter and list of three references (to include reference names and contact information). We regret that only shortlisted candidates will be notified.

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernising key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernisation.

Logicalis Group has an annualised revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

As we continue to grow as a business, our people are our key differentiator with our competitors, and developing and retaining our talent is a key priority for all of our businesses. We will recommend that you watch this short video with input from our employees around the world.

Responsibilities:

• Understand the process and practices related to GNC support Templates and Standard Operating Procedures
• Ownership on critical incidents for customers to deliver resolution with in SLA.
• Perform IOS upgrades and patches to fix software and ensure that the environment is bug/vulnerable free by keeping system with up-to-date software.
• Troubleshoot production issues and network/security problems to fix any infra related issues and work with principal vendors and customer to provide the resolution within the proposed timelines.
• Performing RMA for hardware failures and replacement in production environment
• Perform health checks for the critical environments and ensure the systems running up to the standard and no potential failures.
• Setup staging and simulation for customer activities for critical jobs before actual tasks in production environment.
• Working in 24/7 operations centre and standby role for after office hours support on monthly rotational basis
• Able to follow and meet customer SLA for all the incidents and requests / responsible for the service delivery
• Undertake escalation for Enterprise Networking related matters from level 1 helpdesk engineers, perform level 1/2/3 on site troubleshooting and hardware field replacement works for customers.
• Responsible for updating technical documentations for configuration changes made via helpdesks and/or managed services customers.
• Responsible for opening and closing of support tickets when applicable and providing timely updates to helpdesk personnel and customer for support cases that has been allocated to you

The Individual and their Experience:

• Knowledge of ITIL principles, particularly Incident, Change, Problem and Service Management
• Minimum 2-3 years of relevant experiences in network operations including network, wireless, security technologies.
• Experienced on working with vendors and customer on outage situation and provide direction to juniors and customer on recovering services affectively.
• Hands on experience in operations and BAU for fixing user/infra issues in production environment is essential.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Mission statement:

Lead the engineering execution of medium-size projects and ensure that all related activities are performed in accordance with Hitachi Energy policy, contractual agreements, quality standards, health, safety & environment requirements. Responsible for day-to-day designing and engineering activities aligned with schedule commitments. He / She is to possess technical knowledge and skills relating to the design of various transmission substation/Industry components, systems and equipment. To provide technical guidance to his/her project team and lead project engineering discussion.

Your responsibilities:

• You will design system while adhering to design and engineering principles of transmission substation/Industry, incorporate equipment, system, and safety features in design plans, comply with local and national safety standard and ethics that come with the design engineer role.
• You will maintain records and documents of all the work and design in accordance with unit and customer requirement.
• You will work in within the proposed schedule and budget for the project and liaise with project stakeholders with status update to them regarding the status of the work.
• You will coordinate mechanical and electrical tests on design, if required, conduct tests on equipment against fundamental design.
• You will manage department's compliance with organization’s risk management framework, review design drawings for practicability, completion timeframe and research capabilities.
• You will assist in development engineering resource planning strategy, coordinate with factory and supplier to ensure the design meet with the requirement, prepare design related calculation and issue bill of material·
• Living Hitachi Energy's core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.

Your background:

• You hold Electrical Engineering degree or equivalent.
• Preferably with 3 years’ experiences in Electrical/Transmission Industry.
• Experience and proficient knowledge and skills in BIM - Autodesk REVIT (3D model)
• Experience in switchgear planning, design and bidding related tasks.
• Good knowledge of substations equipment, protection relays and network automation.
• Knowledge of Electrical/Transmission Utilities Industry is preferred.
• Proficiency in English language.

Responsibilities

• Lead a team of line leaders and operators to meet daily production output, quality, productivity and yield.

• Conduct daily pass-down meetings and escalate line issues if any

• Oversee manpower/overtime and consumables planning

• Ensure manufacturing and safety procedures are being followed

• Conduct training/coaching to leaders & operators to improve performance

• Implement ideas and improvement activities to prevent human errors

• Ensure good discipline and housekeeping in the line

• Coordinate with other departments to support projects, evaluations and preventive maintenance activities in the fab

Requirements

• Diploma/Degree in Engineering/Science/Production/IT

• Preferably experienced in high-tech, high-vol manufacturing environment

• Good leadership and communication skills

• Willing to work 12-hour shifts (day or night)