• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

- 1 year contract

- Ang Mo Kio

- Mon to Fri: 8.30am to 6pm

- Up to $6,300

Responsibilities:

• Providing normal business hours service support and on standby 24x7 for Incident calls or escalation calls.
• Reviewing, assigning, and supervising all support teams on their roles and responsibilities and align to Authority’s expectation and standards.
• Managing, supervising and improving the workflow and throughput for Data Center operations where necessary.
• Managing/supervising incidents related to the M&E Facility and/or Cloud Operations.
• Reviewing Data Centre IT infrastructure process such as Asset Management, Capacity Management, Configuration Management, Service Fulfilment management, Change management and get endorsement from Authority to implement or update any policy/process/forms of the Data Center.
• Managing and monitoring vendor performance management according to KPI/SLAs for break fix/maintenance/installation of Data Centre IT infrastructure management.
• Reviewing Vendor’s ITIL framework process in both M&E Facility Operations and Cloud Operations’ maintenance, break fix through Change Management, Incident Management, Asset Management, Capacity Management, Service Requests and ensure that all works are well documented and stored accordingly and made available for audit.
• POC for escalation/consultation of incidents from Customer, Vendor, DC Operators and mediate the queries/requests respectively before escalating to Authority.
• Ensuring uptime of DC infrastructure systems on both M&E Facility and Cloud Operations.
• Reviewing/Approving requests (Change/Service) on both M&E Facility and/or Cloud Operations and involved in the weekly CAB.
• Reviewing/Auditing all documentation performed by all support teams (e.g. DC Operators, FM team and other support teams, etc.) and ensure that it is stored in the appropriate location.
• Coordinating and working with all support teams (e.g. FM Team/Cloud Operators/Security Guards/etc.) where necessary.
• Ensuring all the support teams in the Command Center, Security Guards are performing their daily duties diligently and effectively.
• Supervising/managing all support teams (e.g. DC Operators, Security Guards, Cloud Operations Team/etc.) in the Data Center on handling requests according to the agreed Service Level Agreement.
• Performing any other ad-hoc duties given by Supervisor/Authority.

Period:

• 1 year contract

Location:

• Ang Mo Kio

Working Hours:

• Mon to Fri: 8.30am to 6.30pm

Salary:

• Up to $6,300

Requirements:

• Degree in Computer Science, computer Engineering or equivalent, although consideration will be given to experience and certification
• Working experience in a Mission Critical Data Center environment, with knowledge of IT infrastructure that support a Data Centre.
• Working experience in a Cloud environment, with knowledge of Cloud Services lifecycle environment.
• Good analytical skills and ability to work with others such as vendors, subcontractors and fellow team members.
• Project Management skill and preferably with ITIL framework knowledge.

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Registration no: R1549023)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Resource Centre Pte Ltd (EA License Number: 04C3201 )

3 Shenton Way, Shenton House #19-01, Singapore 068805

T: 6337 3183 | F: 6337 0329 | W: www.successhrc.com.sg

JD and qualifications below:

RESPONSIBILITIES:

• Provide world class technical support to our customers (engineer to engineer)

• Build technical relationships with our customer’s engineering teams.

• Engage customers early in design stage to achieve design win.

• Understand customers technical requirements and create concepts to solve customer’s interconnect challenges.

• Differentiate our products and services above our competitors.

• Provide design guidance to customers on innovative interconnect applications against their design requirements.

• Understand our customers technical roadmaps to co-work with various business unit development activities to customer needs.

• Some travel will be required to meet with customers within different S.E.A region.

QUALIFICATIONS:

• Bachelor’s Degree in Mechanical or Electrical/Electronic Engineering

• 3-5 years of experience in connectors application or system level interconnect requirement.

• Knowledge of power supplies, BBUs, server/GPU, storage, networking and Data Center rack level solutions is desirable.

• General knowledge of industry specifications (UL, EIA, IEC, Telcordia, etc.)

• Highly proactive, innovative, enthusiastic, passionate, with strong problem solving, and analytical thinking skills and team player.

• Excellent verbal and written communication skills – ability to communicate within a Global organization to technical and non-technical audiences and at various levels of the organization.

About the Company

Our Client is a leader in geospatial technologies, serving customers across industries from commercial to government sectors.

Responsibilities

We’re looking for a highly engaged, solution-centric Software Engineer to deliver impactful geospatial solutions to achieve positive client outcomes.

• Understand and analyse customer’s challenges and requirements;
• Work with team members to identify solutions for complex problems faced by customers;
• Design and develop applications that leverage on geospatial technologies;
• Propose innovative designs that are empathetic and create a good user experience;
• Identify areas for professional growth, receive training and attain relevant certification;
• Participate in an agile team to continually improve the quality of solutions to customers.

Requirements

• Degree in Computer Science, Mathematics, Geographical Information Systems, or any relevant discipline;
• At least 3 years of experience full-stack application development, with strong front-end focus;
• Proficiency in JavaScript and its frameworks would be an advantage;
• Proficiency in Geographical Information Systems (GIS) technologies would be an advantage;
• Analytical and problem-solving skills;
• Creativity, innovation and a passion for designing user-centric and effective solutions;
• Excellent communication skills to articulate solutions for complex problems;
• Ability to work in a fast-paced environment with multiple deadlines.

Employment Details

• Career advancement opportunities;
• Good learning & development opportunities.

Get in touch with us

If you’d like to explore this opportunity, please reach out to Charmaine Tan (Regn No. R1102130) at [email protected] for a confidential discussion.

FCS CAREERS PTE LTD (EA 94C4359)

Data Protection Notice: By submitting any application or resume to us, you acknowledge that you have read, understood, and agreed to our Data Protection Policy (www.fcs-careers.com/about/data-protection), and that you consent to the collection, use and/or disclosure of your personal data by us for the purposes set out in the Policy. You may withdraw consent or make an access or correction request in respect of your personal data, however, depending on the nature or scope of such request, we may not be able to continue providing services to you. For any request, enquiry, or feedback, please contact our Data Protection Officer ([email protected]).

Responsibilities

• Responsible for performing corrective and preventive maintenance of CCTV Surveillance System
• Responsible in assisting in planning of the Preventive Maintenance Schedule

Requirements

• Min Nitec in Information Technology/ Electronics/ Electrical Engineering or relevant
• Min 1 years of working experience in computer networking, CCTV set up and Video Management System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Sales Responsibility

Handle enquiries, sales, quotations

Develop Sales strategies to meet sales target

Customer visits and design-in machine vision components to client’s project

Build strong relationship with customers.

Experience in machine vision, robotics and automation will have advantage imaging technologies will be an added advantage.

Job Requirements

Excellent outgoing personality with good communication and interpersonal skills

Able to work with minimum supervision, Excellent learning attitude

Able to travel and meet customers when required

Preferably with at least 2 to 3 years of sales experience

Main Responsibilities

• Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.

• Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification

• Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals

• Prepare operational and maintenance schedule as per MIS

• Work closely and collaborate with the customer support team to ensure customer satisfaction.

• Identify potential upselling opportunities at client site during regular or ad-hoc maintenance

• Remote monitoring of the system operation and performance and reach site if any emergency.

• Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.

• Working with a team and deliver the work within the planned schedule.

• Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.

• Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

• Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent

• Electrical or Mechanical troubleshooting experience would be advantageous

• HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment

• Strong communication and analytical skills.

We are seeking a electrical technician to join ourteam in Singapore.

The ideal candidate should

Job responsibilities

- installation of all types of CCTV/ door access ,etc.

- perform service & repair all types of CCTV/door access system.

- perform checking maintenance andtroubleshooting of CCTV/door access.

- Any other duties as assigned by Managerduring project, from time to time.

- perform handover with customer after jobcompleted.

Job requirement

- At least 4 Year(s) of working experience inelectrical work /installation /

- Have ITC/Diploma in Electrical may bepreferred.

- Be mild-tempered

- Be able to work overtime when required.

- Applicant with CSOC/BCSS cert may bepreferred.

- Required language (s): English (written andspoken)

Position title : System Engineer

Location: Ubi Avenue 1

Working Days: 5 Days Work Week

Working hours : Monday- Friday 9am -6pm

Salary : $8,000~$15,000 (Depends On Experience)

Interested applicants can also send your resume to

WA:+65 8151 4682 (Ms Angel) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Responsibilities:

• Design and build high performance large scale systems, like API Gateway, Message Queue etc.
• Be part of a top-notch engineering team keeping the systems running smoothly at global scale while implementing new features, ensuring reliability, and improving performance.
• Own your code from inception to release, delivering solutions at all layers of the software stack to empower our customers.
• Expect to interact with a variety of languages and technologies including, but not limited to Typescript, Go, Rust, and C/C++.

Requirements:

• Keep up with latest related technology trends and able to self learn new technology.
• Good Linux systems knowledge.
• Strong systems level programming skills.
• Experience working with large scale projects.
• Experience working on, and deploying, large scale systems in high performance computer languages.
• Experience for debugging to ensure the system works in all cases.
• Experience optimizing complex solutions to general problems that all websites face.
• Experience with a continuous integration work flow and using source control.
• Experience with a web server / reverse proxy system (Nginx, Apache, HAProxy, Varnish).

Duties & Responsibilities • To lead the Engineer team to carry out civil and structural engineering jobs in front end engineering design, detail engineering design. • To assist discipline Manager in project civil portion manpower. • To generate project specifications, design philosophy, calculation template to comply with clients’ requirement and local authority’s requirements. • Civil project team manhour control, schedule control. • To prepare foundation, structural or hydraulic calculation sheets, from simple to more complicated items, in accordance to project specifications, criteria and information. Ensuring correct and accurate calculations of loads and member sizes of structures. On average, a Civil Engineer II produces three simple foundation calculation designs a day or 1 structural calculation report a week. • To prepare three-dimensional (3D) models and design drawings for structures and foundations as well as shop fabrication drawings. • To supply design drawing information and instructions to Designers ensuring technical completeness and clearness of data for effective workflow. • Usually prepares anchor bolt list and setting bolt list for client’s procurement purposes ensuring at least (+)/(-) 10% safety factor and meeting client requirements. • Checks own design outputs and reviews design drawings to ensure accuracy and completeness to design requirements and concepts. • May act as Assistant Key Person for small projects or NIDC projects. • Coordinates with other Engineers and Designers to facilitate production of civil design and drawing outputs. • Performs other functions that may be assigned by the Department Manager. Requirements • Bachelor’s degree in Civil Engineering. • Minimum of ten (10) years in the field of years plant engineering design and construction experience in Oil & Gas, Refinery, Petrochemical, Chemical, Pharmaceutical and industrial plants and consistent career experience in the engineering department Skill Requirements • Ability to use computer equipment and peripherals to carry out routine computing tasks. • Basic knowledge on STAAD, AutoCad and Micro station. • Possess good communication and technical skills • Strong leadership qualities and analytical and reasoning abilities. • Ability to read, analyzes, and interprets common technical information, contract reports and instructions.

Our client designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits which are widely used in industries such as consumer electronics, IT and communications, automotive, aerospace, healthcare and others. Its core capabilities are in providing high-end vision inspection and ultra-precision handling solutions for die-sorting, vision inspection and laser marking equipments. They are currently hiring for a Electrical Engineer and will like to invite interested candidates to send your detailed resume to [email protected]

Electrical Engineer

MAIN DUTIES:

• The successful candidate will be part of our Systems & Control team to support the project design and development, installation, commissioning and upgrading of factory automation equipment and other machine assemblies for customers in the various industries.
• Design and implement Electrical Schematic specific to customers and project requirements. Design may involve testers, robotics, vision, PC and PLC separately or in combination.
• Develop electrical designs to meet customers’ requirements or for prototype or development machines.
• Provide Electrical layout drawings and BOM.
• He / She will be involved in each phase of the electrical hardware development process right up to equipment buy-off including post technical support.
• To assist in planning, organizing, coordinating and implementing projects in timely manner to ensure schedules and customers’ requirements are met.
• Work closely with vendor for Electrical hardware installation, machine wiring and panel wiring.
• Prepare test procedures, Instruction and Operation manual and final documentation.

RESPONSIBILITIES:

• Consults with customers and/or other departments on project status, proposals and technical issues such as electrical system design and maintenance.
• Direct electrical hardware design and development of documentation.
• Designs application electrical hardware to ensure system operates in conformance with specifications.
• Develops and directs hardware system testing and validation procedures.
• Modifies existing hardware to correct errors, to adapt it to new software or to upgrade interfaces and improve performance.
• Consults with engineering staff to evaluate interface between electrical hardware and software, develop specifications and performance requirements and resolve customer problems.
• Provides technical support and instruction to staff and customers regarding electrical hardware standards and troubleshooting
• Design electronic components and systems for projects and products
• Develops detailed design drawings and specifications for electrical equipment and controls using electrical CAD software.
• Writes technical reports, manuals and technical support documentation.
• Provide technical support and instruction to staff and customers regarding electrical equipment standards and troubleshooting.
• Supervise Control Engineers and other employees as required.
• Responsible for any other role as assigned by the Supervisor.

EDUCATION AND EXPERIENCE

• Degree/Diploma in Electrical, Mechatronics, Technology or an equivalent degree/diploma in a related technical field.
• Relevant experience working with multi-disciplined project teams, in an automation or system integration or manufacturing environment with exposure across various industries.
• Experience in electrical hardware design specializing in PC/PLC controller.
• Ability to work independently in designing and liaising with customers on technical specifications and requirements.
• Possess an excellent manufacturing or process engineering background, a superior mechanical aptitude and proven trouble-shooting skills.
• Experience in E3, Eplan, AutoCAD or Electrical CAD software.
• Good presentation and communication skills.
• Excellent project management ability.

New Product Development

• Proceeds development according to implement plan
• Makes functional specification
• Proceeds electrical, or firmware design
• Plans and proceeds prototype model evaluation and prepare evaluation to reports.

Re-design of Products

• Supports Lead Engineer to estimate return and investment.
• Proceed re-design according to implementation plan.
• Proceeds electrical, mechanical or firmware design.
• Plans and proceeds prototype model evaluation and prepare evaluation report.
• Makes up product manufacturing standard.

Technical Support

• Prepares technical information for parts localize and price negotiation.
• Supports production line if necessary according to superior’s direction.
• Supports parts faculty/investigation according to superior’s direction.

Requirements:

• Bachelor of Mechanical Engineering
• Experience in analog or digital electrical hardware design
• Entry level are welcome to apply.

Electronics Manufacturing Industry

East/Bedok

5 days work week

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Tel: 62226441

Attention: Audris Teo / EA Personnel No: R1102063

Key Responsibilities

Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies.

Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products.

Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality.

Develops and uses test procedures, including assisting with the definition of test specifications with design / software engineering. May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities.

Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions.

Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented.

Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required.

Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development.

Other Requirements: This position may require standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools.

Additionally, because this position also may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Providing maintenance support on the developed application and modules
• Work with system team to investigate all reported problems/errors & initiate amendments & testing so that the system can operate correctly & efficiently
• Engage users to implement enhancements/refinements based on changes in client requirements and timeline agreed upon with users
• Work closely with the BA / Project manager in understanding the functional and system requirements.
  Prepare & maintain up-to-date system and app documentation if required

Requirements:

• Experience in web based application development using Java, Javascript, HTML, CSS, Visual Studio.
• Added advantage for Experience in developing using Spring Framework, Spring Boot.
• Added advantage for Experience in frameworks such as Angular, ReactJS and Node.js.
• Demonstrate strong understanding of fundamentals of requirements specification, design, coding, and testing of information systems
• Preferably with experience working with relational database such as MySQL.
• Possesses good skillset in logical deduction in issue isolation and root cause analysis
• Good working knowledge of Azure/AWS will be an added advantage
• Possesses good interpersonal and communication skills.
• Possess initiative and disposition with a strong commitment and orientation towards results and high quality standards
• Team player with strong communication and interpersonal skills
• Self-motivator with a positive attitude and with high energy
• Customer focused

Key Responsibilities

• Key Product Unit, Process engineer for bump/FOWLP metallization product development at Applied Product Development Center (APDC).
• Product development include Degas, PreClean and PVD technology, required to design, collect data, analyze and compile reports on moderately difficult experiments, within safety guidelines. Generate internal documentation for products, presentations and technical reports.
• Perform new hardware characterization, tool issue troubleshooting, on moderately difficult systems, within safety guidelines. Basic hardware knowledge required.
• Troubleshoot moderately complex problems, perform Root Cause Analysis and resolve moderately difficult engineering issues
• Interact with customers to resolve moderately difficult engineering issues/problems.
• Implement new technology, products and analytical instrumentation

Requirements:

• PhD/ Master/ Bachelor in relevant Engineering/ Science/ Physics studies
• Candidate with minimum prior experiences to few years experiences are welcome to apply
• Understanding of semiconductor process and industry is compulsory
• Resourceful, meticulous and problem-solving attitude

Working Location:

• Science Park II

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications
• Assess potential risks, materials and costs
• Provide advice and resolve creatively any emerging problems/deficiencies
• Oversee and mentor staff and liaise with a variety of stakeholders
• Handle over the resulting structures and services for use
• Monitor progress and compile reports in project status
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

Responsibilities

• Manage, configure and upgrade a wide variety of security technologies
• Respond managed security technology’s fault alerts and/or customer escalation
• Use strong fundamental knowledge (e.g. TCP/IP) and product-specific knowledge to perform troubleshooting on common technical issues on the managed security technologies
• Perform escalation to internal product domain experts and/or external product vendors
• Work with internal experts/external vendors to resolve technical issues
• Respond to inbound Change Requests (CRs), Service Requests (SRs), Queries on managed security technologies, in a timely manner (within stipulated SLA).
• Perform regular configuration backups on managed security technologies
• Plan and coordinate Maintenance Windows with customer on necessary software patching and version upgrades.
• To provide day two security support service
• Create and update technical documentations on managed security technologies
• Generate monthly reports according to service scope requirements

Requirements

• Degree/Diploma in computer science, computer engineering, or relevant field.
• Hand-on experience in Firewall Administration and Operation
• Experience in security technologies (e.g. FW, UTM, IDS/IPS, SWG/SEG, VPN, EPP, DLP, ATP, 2FA, PAM, etc.)
• Knowledge and exposure in following technologies is advantage: RSA Solutions, Splunk, Cisco NG Firewall/NG IPS, CyberArk PAM

Kindly indicate 106 – Security Engineer

Interested applicants may send in their detailed resumes in MS Word to Meme @ [email protected]

IT Consultancy & Services Pte Ltd

EA No: 92C5311 | EA Reg No. R23116792 | www.itcspl.com

Responsibilities:

• To prepare engineering documents for approval submission.
• Review comments and make revision if necessary.
• To issue final specification/ BOM for purchase order and issue of PR.
• Negotiate with vendors on terms and condition of purchase.
• To liaise with vendors/ subcontractors for the timely delivery of goods and fabricated or installation
• To coordinate with subcontractors and internal supervisors and contract team for the site installation, testing and construction activities.
• To liaise with the customer and consultant on their engineering request. To attend technical meeting to help resolve technical issues.
• To supervise the Draft person in the production of drawings.
• To actively involved in safety activities, prepare Risk Assessment, Method Statements, Permit to Work to ensure site activities work can conduct in a safely and timely manner.
• To prepare O&M manual for the project.
• To prepare micro schedule and follow through in order to control and ensure timely completion of construction activities.
• Able to work and travel on oversea assignment for short duration.
• Any other task as designated by the management

Requirements:

• Diploma / Degree in Mechanical/Civil/Chemical or equivalent
• Experience in the following disciplines of the fabrication and installation of steel structure works, Stainless steel piping and Square and round Ducting works related.
• Experience to work with heavy lifting equipment and also the preparation of methods statement and also risk assessment

WHAT DOES THE ROLE OFFER?

• Gain unique insights into the ophthalmic optics and frames industry where EssilorLuxottica leads the fight against the word’s #1 disability – vision impairment.

• Long term career growth with the company in a sun-rise industry

• Exposure to APAC + India, one of the most exciting regions in EssilorLuxottica in terms of growth, diversity, and challenges.

• Experience in supporting both organic businesses and acquisitions

• Visibility with senior stakeholders in both the regional HQ.

• Interactions with diverse finance teams across 3 major sub-regions WHAT ARE THE

UNIQUE CHALLENGES/OPPORTUNITIES?

• 70%+ of the region consists of joint ventures which are run by entrepreneurs which we consolidate and need to ensure proper controls in place.

• Multiple ERP systems and manual intensive processes. Regional ERP implementation ongoing

• Distributed controllership environment. Shared services strategy under development

• Significant opportunities and low-hanging fruits to standard finance and accounting processe

Key Responsibilities:

This role is a core member of the APAC HQ team. The mission of the person is 2 fold.

Transformation of the Finacne Organization. This include but not limited to the following:

▪ Division Operating Profit implementation / roll out

▪ New Planning Tool Rollout

▪ Legal Entity Reduction

▪ Create / prepare Statutory KPI for Joint Ventures

▪ Working Capital roll out including new DPO (Days Payable)

▪ Cash Flow forecasting and automation of reconciliation with bank balance

Business Controlling

▪ Be the FP&A for selected region/business to partner with business managers to drive:

• Monthly business profitability / monitor/understand/analysis of key KPI for business success

• Budget process

• Forecast process.

Promote sustainable business growth by strengthening financial stewardship and promoting an effective control environment

The person will collaborate with the Finance leadership in the APAC + India to execute the above deliverables.

REQUIREMENTS

• Qualification: Recognized Degree in Accountancy/Finance with solid accounting and process knowledge. (CPA/ACCA preferred though not required)

• Minimum 5 years of relevant working experience in Finance.

• Project management skills is an advantage.

• Positive attitude and self-starter, going the extra mile.

• Excellent interpersonal and communication skills.

• Advanced MS Excel skill is required as the role requires analysis and automation of reporting Advantage

• Experience with process improvements and reporting automation is preferred.

• Experience in MS Dynamics ERP (D365) is an added advantage.

• Other Good PC skills including MS ppt, consolidation tool such as HFM, etc.

• Exposure to JV partnership support and accounting a plus.

• Treasury experience and FX hedging expertise highly valued

Responsibilities

• Identify and resolve all technical issues and resolve them within SLA timeframe by work closely with contractors, Requesting Licensees and internal departments.
• Manage and monitor contractor performance
• Identify potential issues prior to provisioning.
• Handle all CS escalations expeditiously and resolve them within SLA to ensure good customer experience.
• Find long term solutions and implement preventive action to all complaints and disputes to prevent future occurrences
• Prioritize and manage all VIP escalations with a high level of professionalism
• Prepare daily / weekly monitoring and analytical reports.
• Scrutinize contractor performance through respective feedback channels/analytical reports and assess areas of improvement/provide suggestions on SOP enhancements
• To pick up knowledge and skillsets from other sections within SP to prepare for the possibility of job rotation
• Perform other duties as assigned by supervisors.
• To go on-site to handle complaint cases and audit check on contractors, when required.

Requirements

• Diploma/ Nitec in any discipline (Engineering preferred) with 1 year relevant working experience is preferred
• Class 3 driving license and own transportation would be an advantage for onsite duties
• Possess good working knowledge of MS Office Outlook, Excel, Word and Powerpoint
• Must be team player and possess basic customer service skillsets for effective communication with end-users
• Job Reference: L47V7X7V

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

Tel: 6950 9754

EA Registration Number: R22110899

EA License number: 02C4944

EA Personnel: Celeste Wong Xin Yann

Responsibilities:

• Manages and monitors all installed systems and IT infrastructure to be in line with SOP (standard operating procedure) in place.
• Defines customers’ needs and functionalities.
• Assists in the coordination of system related activities and evaluation of the implementation design.
• Installs, configures, and tests operating systems, application software, and system management tools.
• Providing Level 1 and 2 support
• Responsible for supporting operational systems satisfying contractual Service Level Agreement (SLA)
• Performs and manages routine preventive maintenance and operational activities promptly and effectively (e.g. OS patching)
• Evaluates the existing systems and provides the technical directions. Collaborates and manage various stakeholders to ensure high quality deliverables within the guidelines, policies, and procedures.
• Anticipating, troubleshooting and rectifying systems related issues.
• Continual maintenance of security, including backup and redundancy strategies
• Liaising with 3rd party vendors, IT providers, etc. for support where required
• Provide system documentations and reports

Requirements:

• BS/MS degree in Computer Science, Engineering or a related subject
• At least 2 years of experience in System administration, including installing, configuring and troubleshooting UNIX /Linux based or windows server environments.
• Experience with virtualization and containerization (e.g., VMware, Hyper-V)
• Experience with network devices (e.g. firewall, switch) and networking knowledge (OSI network layers, TCP/IP)
• Experience with monitoring systems and shell / bash script for task automation is an added advantage.
• Solid experience in the administration and performance tuning of application stacks is an added advantage
• Pro-active, resourceful, willing to learn and able to work independently as well as in a team

Our client is from Manufacturing Industry. They are looking for a Service Engineer to assist their Engineer team for the next phrase of their business. They are located in West– easily accessible. The Service Engineer is responsible for:

Duties

• Delivering pre- and post-sales support to customers in alignment with departmental objectives.
• Coordinating the tasks of service engineers and technicians, ensuring efficient handling of service calls and issue resolution.
• Methodically troubleshooting and promptly repairing equipment.
• Providing recommendations to customers on appropriate usage, maintenance, and corrective actions.
• Planning and executing preventive maintenance for contracted customers.
• Assisting with Projects and A&A works as directed by management.
• Ensuring the accurate organization of service, warranty records, and installation data.
• Training and guiding assistant service engineers and technicians on technical matters.
• Serving as the main point of contact for management updates on issue resolution and team coordination activities.

Requirements

• Minimum of Diploma in Mechanical/Electrical Engineering or its equivalent
• At least 2 years of relevant working experience in related industry
• Project Management, Product Knowledge Skills & exposed to AutoCad or relevant drawing applications

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

What the role is

As a member of Team Central Provident Fund (CPF), you will play a crucial role in helping over 4 million members save for their retirement, healthcare, and housing needs as well as helping them cope with life’s uncertainties. With a fulfilling career, career growth, and development opportunities, you will be part of a big family of dedicated professionals. Join us and champion financial security for Singaporeans while leaving a lasting legacy.

What you will be working on

You will be responsible to manage the infrastructure that provides system resiliency solutions to protect the data. This includes the system administration of the enterprise backup, archival and storage systems to achieve a high level of security, reliability, resiliency, and recoverability.

A key role involves understanding of the cyber-security threats around data protection (eg. ransomware, site disaster), identifying the appropriate solutions to address the threats, using data to validate key decision points and thereafter to drive and see through the execution end-to-end.

Your key responsibilities include:
• Design, implement, and maintain backup and storage solutions across our hybrid cloud environment.
• Ensure the reliability and availability of backup and storage systems through monitoring, maintenance, and troubleshooting.
• Able to perform provisioning of infrastructure through Terraform and Azure DevOps or similar CI/CD tool chains,
• Familiar with all relevant security and governance standards and ensures compliance.
• Create and maintain documentation on the backup systems, processes, and procedures.
• Participate in disaster recovery planning and testing.
• Assist with Incident / Problem Management and follow up till the issues are resolved and closed.
• Proactively review gaps in existing processes and systems and recommend continuous improvements.
• Stay abreast of emerging cyber security threats, vulnerabilities, and controls to identify and minimize the impact on IT and business.

What we are looking for

• At least 6 years of working experience with enterprise backup solutions.
• Advance knowledge of cloud architectural principals and design.
• Experience in deployment, implementation and managing operations in a hybrid architecture for backup and archival (on-prem and cloud).
• Practical experience in modern hyper-converged backup software preferred.
• Familiar with Incident management procedures and troubleshooting
• Robust IT operations background with competencies in server virtualization, disaster recovery, server backups and storage management.
• Ability to work beyond business hours and weekends for work contingencies where necessary.
• Effective verbal and written communication skills, as well as good interpersonal and organizational skills.

Seniority of appointment will commensurate with relevant work experience.

What you can expect

• A challenging and rewarding career
• A variety of formal and informal training where you can hone your skills in the evolving technology landscape
• Promotion opportunities through your capability and on the job performance
• A friendly work environment with like-minded colleagues to co-create and collaborate together
• A hybrid work model where you can work remotely up to 50% of the time
• A productive yet growth-oriented workplace with flexible dress code where you are empowered to decide your appropriate outfit for the day
• Comprehensive rewards package
• Annual leave and pro-family leave
• Medical and dental benefits
• Access to recreational activities
• Position is on 2-year full time contract directly under the payroll of CPF Board with potential for emplacement into permanent position

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026