Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 3 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 3 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Duties & Responsibilities

• Prepare the equipment list
• Prepare the specification and data sheet as per codes / standards, project and client’s requirement, for pump, loading arm, lifting cranes, marine gangway, air compressor, nitrogen package, hot oil package, oily water system, vapor recovery system and etc equipment for Oil & Gas industries
• Prepare the specification and data sheet for cryogenic pump, BOG compressor, condenser, LPG heater, seawater strainer, flare and etc equipment for LPG industries
• Prepare the requisition and RFQ documents for vendor enquiry
• Prepare the technical clarification and technical bid evaluation of vendor proposal
• Review and check the drawings, designs specification, materials and equipment from vendor for conformity with project technical requirements
• To liaise effectively with vendor and inter-departments to resolve engineering technical issue
• To resolve and response to client comment.
• Prepare information drawing for interface design work whenever is necessary
• Prepare bill of material for cost estimation of bid project
• Provide engineering support for the equipment installation and commissioning activities at site
• Provide engineering support for maintenance works.
• To carry out any other duties as and when assigned by the immediate supervisor or principle engineer

Qualification & Experience Generally Required

• Bachelor Degree in Mechanical Engineering or its equivalent
• Min. 1 to 2 years engineering knowledge in mechanical disciplines in Oil & Gas and Petrochemical industries.
• Experienced in equipment engineering specifications and standards
• Familiar with industrial standards and local codes
• Strong communication skills and the ability to stay organised and multi-task
• Proficient in using MS Word, Excel, Autocad

The PTO Lead Process Engineer leads new product introductions and the transfer of drug products to other facilities of moderate/high complexity independently and is a coach for his/her colleagues on the commercialization and manufacture of all drug products. He/ she typically will assume the responsibilities of a technical product steward and leads/supports all technical/ process activities (for example) investigations, validation and qualification processes, risk assessments and process safety management activities under his/ her responsibilities. The PTO Lead Process Engineer also leads/supports continuous process improvement activities to enhance site performance metrics and provides advanced/expert knowledge to the site and across our global technical network (while leveraging on other site experiences / knowledge) and continuously expands on personal expertise. He/ she will also provide technical supply support independently. The PTO Lead Process Engineer is expected to possess advanced/expert knowledge of at least one process/platform technology and supports the objectives of his/her seniors and the direct supervisor.

WHAT YOU WILL DO

MAIN RESPONSBILITIES

• Leads new product introductions to the site by conducting process and equipment comparisons, new raw materials introduction, development studies, clinical supplies manufacturing, cleaning processes development/ validation and training of technicians as required. Identifies and implements strategies for PPQ matrixing, novel technologies and new products etc. Authors PPQ protocols, reports and other associated documentation related to a new product introduction. Expected to have an advanced knowledge of product development, scale-up and technical transfer, key supporting documentation and associated regulatory requirements. Anticipates and remediates quality issues and challenges from the technology transfer process. Demonstrates advanced knowledge in technical writing for investigations, change request, PPQ reports and CMC sections.
• Leads and/or supports the design and execution of small/ full scale experiments using appropriate methodology and/or simulations for products/ processes to evaluate the impact of proposed changes to validated equipment/ processes.
• Proactively identify solutions independently to address issues that arose during experiment/ evaluation
• Leads/ provides technical guidance in support of site and divisional capital projects and new facility start-up activities. Ensures that the process design is well thought-out and robust for routine manufacturing. Provide technical input independently to the process design to ensure its fit for purpose for routine manufacturing. Responsible to transfer the knowledge of the project and facility to IPT colleagues.
• Provides technical expertise related to the product, equipment and manufacturing/cleaning processes in response to deviations/ product complaints/ adverse events to identify point of occurrence, root cause and corrective/ preventative actions. Demonstrates ability to lead and resolve complex technical issues and investigations and resolve with minimal supervision.
• Provides technical expertise for compliance activities such as audit and regulatory support. Acts as primary regulatory representative with business partners and regulatory agencies for moderately complex products/ programs/ issues.
• Manages product portfolio activities and is expected to manage a project team for activities associated with the product portfolio. Examples (but not limited to) include managing documentation updates (e.g. SOPs, batchsheets, recipes), quality risk assessments, change control management/ filing support (if applicable) and validation activities such as equipment qualification, simple process validation and cleaning validation/monitoring activities. Expected to have an advanced knowledge of respective compliance topics related to the above-mentioned activities. Demonstrates good project management skills (e.g. define core team and activities, project scheduling, stakeholder management and issues escalation etc), and demonstrates the ability to manage/ influence the project team.
• Supports routine supply manufacture by providing on going technical support to the IPT, participates in Tier processes and implements opportunities for improvement utilizing MPS (Our Production Systems) tools. Ensures optimum production runs, identifies constraints and non-conformances and troubleshoots to resolve complex issues in production systems. In addition, conceptualizes process designs to troubleshoot and resolve complex operational or manufacturing issues and recommend enhancements to improve production runs and enable the continuously improvement of the product cost structure.
• Manages and performs the proactive monitoring of the performance of process parameters, critical quality attributes and equipment/module(s)/unit operation(s) performance during manufacturing and cleaning. This could involve leading/participating in Prospective Process Analysis (PPA), statistical analysis and response to shifts and trends in process performance. Undertakes responsibilities as an active site product steward and is a member of the Value Chain Technical Team where applicable.
• In addition, leads Continued Process Verification and participates in Annual Product review activities as part of product lifecycle management. Applies moderately complex statistical and risk analysis tools to evaluate actions required to ensure product robustness across applicable manufacturing equipment and processes.
• Demonstrates advanced understanding of product CPP, CQA, Cpk and sterile boundary of the current validated processes. Has good knowledge of the raw materials and PCC (product contact components) used for the products under his/her responsibility.
• Actively participates and shows commitment to collaboration and sharing of best practices across the global S&T network. Typically possesses advanced and/or expert knowledge in at least one platform technology/ process.
• Complies with all divisional and site-specific policies, guidelines and procedures.
• Demonstrates and promotes Environmental, Health & Safety (EHS) leadership behaviors, ensuring that all activities are carried out in accordance with EHS requirements. Actively participates in GEMBA safety walks. Leads/ participates process hazards analyses (PHA) and applicable Process Safety Management (PSM) activities related to new/inline products.
• Where applicable, develops SOPs, gap analyses and procedures for Quality/EHS subsystems/ topics in compliance with regulatory requirements, divisional and corporate policies and guidelines. Typically possesses advanced and/or expert knowledge in at least one compliance topic.
• Demonstrates leadership behaviors in alignment with our leadership standards (Individual Contributor). Practices Inclusion as the How.
• Leads personal career development with manager assistance through annual Performance Management Process (PMP), Employee Development Plan (EDP) and career mapping.
• Any other duties as assigned by the Supervisor.

WHAT YOU MUST HAVE

Qualification:

• Bachelor's degree in a technical field, including Chemical or Mechanical Engineering, Chemistry or Pharmaceutical Sciences

Experience:

• Minimum 5 to 10 years technical experience in related pharmaceutical manufacturing industry.
• Demonstrated capability to successfully lead teams in complex projects.
• Expert knowledge of core technology/unit operations relevant to active pharmaceutical ingredient, Biotech and/or Non-Sterile manufacturing.

Leadership, Professional and Functional Competencies

• Demonstrate leadership skills in alignment with our Leadership Standards, focusing on build talent, fostering collaboration and drive results.
• Effective communication skills, both oral and written. Ability to work effectively on cross- functional teams as a leader or a core member.
• Strong Leadership capabilities, with desire for active people development in the organization.

Who we are

We are known as Merck & Co., Inc., Rahway, New Jersey, USA in the United States and Canada and MSD everywhere else. For more than a century, we have been inventing for life, bringing forward medicines and vaccines for many of the world's most challenging diseases. Today, our company continues to be at the forefront of research to deliver innovative health solutions and advance the prevention and treatment of diseases that threaten people and animals around the world.

What we look for

Imagine getting up in the morning for a job as important as helping to save and improve lives around the world. Here, you have that opportunity. You can put your empathy, creativity, digital mastery, or scientific genius to work in collaboration with a diverse group of colleagues who pursue and bring hope to countless people who are battling some of the most challenging diseases of our time. Our team is constantly evolving, so if you are among the intellectually curious, join us—and start making your impact today.

As a member of the Control & Instrumentation team, you will be responsible for the effective maintenance of control systems and instrumentation in the power plant to achieve high reliability and availability in accordance with statutory, regulatory, and safety requirements.

Responsibilities:

• Ensure maintenance work is executed effectively, efficiently and complied with safety and regulatory requirement.
• Respond and attend to plant failures and forced outages to ensure timely and proper rectification and restoration.
• Plan and ensure safe and timely execution of plant overhaul activities.
• Recommend and implement modification, upgrading and installation plans for plant system and equipment for enhancement, availability and reliability improvement.
• Manage the procurement of parts and services to meet the maintenance needs of the section, including spare parts and external services for routine and breakdown maintenance.
• Lead and manage a team of technical officers and technicians.
• Development of staff.

Requirements:

• Degree in Electronic & Electrical Engineering or equivalent recognised by the Professional Engineers Board.
• Possesses sound knowledge of Control and Instrumentation and good working knowledge of safety and statutory requirements.
• Driven self-starter with strong work ethics.
• Team player with strong analytical, technology and communication skills.
• Is available on standby after office hours for emergency calls.
• Knowledge in cyber security will be advantageous.
• Have a safety mindset and display good workplace safety behaviour.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures.
• Witness and provide contractor resources to support FAT as required.
  Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

Job Info:

• Basic: $3000 - $4000 + Phone Allowance + OT + Performance Bonus
• Working Hour: Monday - Friday (9am - 6pm)
• Location: Tampines

Job Scope:

• Take the lead on AV initiatives and provide input for project procurement
• Offer expert advice on project plans and layouts
• Assist in the procurement of AV hardware and software, ensuring project needs are met
• Plan, maintain, and monitor project timelines, intervening when necessary, and managing equipment storage and transportation
• Perform rack and stack, onsite installation, upgrades, troubleshooting, and repair of AV equipment, networking, and other in-house projects at customer premises
• Complete electrical wiring, trunking, programming, and basic construction setups (may require the use of a ladder)
• Manage, test, and commission CCTV, door access, ELV equipment, Bluetooth devices, and other necessary devices
• Ensure timely completion of testing, configuration, staging, and upgrades for assigned projects
• Liaise with clients to understand their requirements
• Conduct quality control analysis prior to events
• Diagnose and resolve technical issues, both hardware and software, as needed
• Respond to service calls related to equipment breakdowns
• Provide on-site support and user training at end-users' premises.
• Ensure production and updating of documentation such as user guides, etc
• Follow up with the finance department regarding costing and billing

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Qualification:

-Degree in Electrical.

- 3-5 yrs experience at Electrical Equipment.

Job Description:

Improved JD:

• Oversee the maintenance, monitoring, and uptime of EV charging stations to ensure seamless customer experiences. Lead a service team.

• Manage the lifecycle of technology assets, including chargers, software platforms, and network security, ensuring system reliability and scalability.

• Establish and implement SOPs for troubleshooting and preventive maintenance, optimizing network performance.

• Implement data analytics solutions to monitor and analyze charging station performance, driving continuous improvements in operational efficiency.

- Collaborate with key vendors, suppliers, and partners to secure and manage essential hardware, software, and support services. Oversee the design, testing, and implementation of new chargers, including setting up Router, LAN or SIM. Set up API.

- ⁠Ensure that all technology solutions comply with local regulations and industry standards for safety, environmental impact, and cybersecurity.

• Oversee the implementation of cybersecurity protocols to protect customer data and infrastructure from potential threats.

- Work closely with the customer support team to address technical issues and improve customer satisfaction.

• Evaluate and manage relationships with Factory & technology providers, ensuring cost efficiency and quality.

Purpose Statement:

• Ensures reliability and mechanical integrity of equipment for processes, utilities, facilities and controls with an objective to constantly improve site production and cost performance.
• Develops engineering solutions for repetitive failures and all other problems that adversely affect plant operations including capacity, quality, cost or regulatory compliance issues.
• Promotes, supports, co-ordinates and facilitates multi-disciplinary, multi-level teamwork (reliability) improvement activities, both reactive and proactive, and assist in implementation and follow-up of action items

Major Responsibilities:

• Ensures reliability and maintainability of equipment, processes, utilities, facilities and controls with an objective to constantly improve site production and cost performance
• Lead and drive mechanical integrity program in compliance with regulations
• Take a lead to troubleshoot equipment reliability issues and carryout RCFA for the repeated failures and failures that has an impact to production, quality and safety.
• Lead RCM studies for critical assets/systems and implement the action items generated.
• Run online/offline condition monitoring program site wide.
• Promotes, supports, co-ordinates and facilitates multi-disciplinary, multi-level teamwork (reliability) improvement activities, both reactive and proactive, and assist in implementation and follow-up of action items.
• Works with project engineering teams to ensure reliability/ maintainability of new/modified installations.
• Perform analysis of asset performance including: Asset utilization, Overall equipment effectiveness, remaining useful life and capital replacement plans as well as other parameters that define Site MEP KPIs such as availability, maintenance performance, reliability and R&M costs of assets.
• Develop SOPs, equipment job aids, checklist to assure no equipment reliability issue after repair work.
• Evaluate content of maintenance plans in CMMS including methods, maintenance frequencies and spare parts needed

Qualifications:

Education

• A bachelor’s degree or a diploma in Mechanical engineering discipline.

Experience

• Mechanical engineering degree with at least 5 years work experience or a diploma with a minimum of 15 years of relevant work experience in pharmaceutical/ biological/ chemical/ oil & gas industries.
• Experience driving RCM studies and RCFA
• Experience/Knowledge in Asset Integrity Management
• Sound technical knowledge coupled with hands-on experience in maintenance of processing equipment

Skills

• Comfortable working in a team and matrix environments with high degree of initiative and self-motivation
• Scientific approach to solving problems and makes data-based decisions.
• Keen in driving and adopting new technologies.
• Knowledge of CMMS, Reliability, and proficiency in MS Office products (Excel, Outlook, PowerPoint, Word, Project)
• Knowledge on vibration analysis, RCM and RBI
• API 510/570/580 certification will be an added advantage
• Good written and oral communication skills
• Interpersonal skills and a "hands-on" attitude
• cGMP experience is a plus

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

Position Overview: Customer Success Engineer provides technical support and ensures the success of our client's post-implementation. He/she is to be highly knowledgeable and skilled in all aspects of Tunity’s product architecture, showcasing individual expertise in software and adept knowledge of its integration with hardware. Acting as the technical contact point for our clients, he/she ensures a seamless and cohesive experience of service support for our clients.

Key Responsibilities:

• Product Expertise: Develop a deep understanding of Tunity's products, from software to hardware, to provide comprehensive support across our product and solution suite.

• Software Support: Provide expert software support, resolving issues swiftly at the root cause to maintain high levels of client satisfaction.

• Maintenance Management: Implement and manage software maintenance processes, actively monitoring and analysing activities to identify improvement areas, and managing preventative maintenance schedules.

• Solution Maintenance: Oversee the ongoing maintenance of software and platform solutions, ensuring they are current, optimized, and operating effectively within the client's infrastructure.

• Hardware Liaison: Collaborate closely with the hardware team, addressing hardware-related concerns, and providing timely resolutions to clients.

• Client Communication: Work in tandem with Customer Success Specialists in client engagements and communications, such as guiding clients on resolution processes, conducting training, participating in and contributing to client meetings, etc.

• Documentation and Analysis: Create and maintain technical documentation, conduct regular system performance and cost analysis, and prepare reports that inform strategic decisions.

• Technical Assessments and Implementation: Lead in-depth technical reviews and strategically recommend solutions to address client change requests, ensuring optimal outcomes and seamless integration of modifications. Implement and perform coding of the approved solution.

Qualifications:

· Tertiary qualification in Computer Science, Information System, Computer Engineering or a related field.

· At least 3 years of professional experience as a developer

· Proficiency in back-end development using Entity Framework, C#, .NET Core, .NET Framework, MS SQL, and RESTful Web API.

· Proficiency in front-end development using Angular 2+.

· Solid understanding of databases, both SQL and NoSQL.

· Experience with version control systems (e.g., Git).

· Knowledge of containerization and orchestration technologies (e.g., Docker, Kubernetes) is a plus.

· Knowledge of Single sign-on (SSO) (e.g Microsoft Entra ID, AWS IAM) via SAML/OAuth is a plus.

· Familiarity with cloud platforms (e.g., AWS, Azure, GCP) is a plus.

· Experience in Inventory Management System, Warehouse Management System and SAP is a plus.

· Excellent problem-solving and communication skills.

· Ability to work effectively in a collaborative team environment.

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures.
• Witness and provide contractor resources to support FAT as required.
  Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

Position Overview:

As a Sr. Staff signal integrity engineer, you will be working on challenging SI and PI tasks in globally distributed teams. You will be supporting SI/PI signoff of chip design, package design and PCB design in order to support successful delivery of products of various product lines to market. You will be working with design, test, P&R and application teams globally for modeling of chip high speed I/O and power rails. You will be supporting customers in signing off hardware design or resolving SI/PI issues where system design has constraints. You will also be involved in defining specifications of product electrical performance. You may also be involved in modeling and simulation of EMC issues.

Responsibilities:

Primary (70%):

1. Responsible for SI/PI signoff of chip design, package design and PCB design.

2. Responsible for modeling high speed I/O and PDN.

3. Responsible for customer support for PCB design signoff and issue debug.

Secondary (30%):

1. Responsible for product electrical specifications related to high speed I/O.

2. Responsible for modeling and simulation of EMC issues.

Requirements:

Experience/Skills:

1. 10+ year working experience in SI/PI

2. Deep understanding in electromagnetic theory, transmission line theory and microwave theory

3. Familiar with SI/PI design flow, time domain and frequency domain modeling and simulation

4. Good comprehension of PLL, equalization, CDR, jitter, noise, IBIS modeling, 8b10b encoding

5. Hands on with lab equipment including high speed oscilloscope, spectrum analyzer and network analyzer

6. Skilled with SI/PI simulation tools from ANSYS, Cadence, Keysight and others.

7. Skilled in data processing with script in Python, Matlab or other language.

8. Experience in MIPI D-PHY, C-PHY and PAM-4 is a plus.

9. Good communication skills and team work.

10. Education: MS/PhD

Job Responsibilities:

• Supervise all engineering works, restricted activities civil, architectural, electrical and mechanical works carried out by the Contractors/SWCs etc
• Liaise with QP(s) for technical issues and coordinate the site activities with subcontractors
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.
• Attend all meetings with Stakeholders such as Authorities, Subcontractors, etc
• Prepare Monthly Progress Report
• Ensure site safety and compliance to Authorities' requirements

Requirements:

• Candidate must possess at least Bachelor's Degree in Civil Engineering Recognised by the PE Board
• At least 5 Year(s) of working experience in construction of civil and structures for LTA/MRT Projects
• Availability for Night Shifts: Candidates must be able to work during night shifts.
• Required Skill(s): Registered engineer
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

As a Senior Design Engineer, you will be working within a fast paced and exciting field with a dedicated inspiring workspace focused on developing products depending on advanced robotics and artificial intelligence technologies. Within Upstream Robotics you will be a crucial member of a dynamic team to help meet and exceed the requirements of our products and embedded technologies. You will be working closely with other engineers, designers, scientists, specialists, downstream teams and other cross functional teams to create and develop new technology, product formats and business cases for projects in our portfolio.

Responsibilities include:

• Designers will be expected to initiate new product concepts and ideas and identify market opportunities from a blank sheet of paper.
• Be responsible for leading key pieces of complex technology/product sub-assemblies that help to define the specification of future products.
• Produce working concepts for reviews with the use of handmade or prototype parts.
• Produce mechanical designs across a range of device types and technologies to deliver our product performance specifications while considering cost, manufacturing, and time delivery.
• Be responsible for 3D CAD and design requirements of mechanical systems of mechanical systems from concept, through evaluation to downstream delivery. Take an active role in defining design specifications for a given concept.
• Use hand calculations and/or computer simulation to validate designs through the development process, backed up with lab-based testing / characterisation / validation.
• Analyse test results, summarise and communicate these with both technical and non-technical colleagues.
• Challenge and develop Dyson engineering practices to continuously improve design quality.
• Define plans, monitor progress and report to management on technical risks.
• Take an active, hands-on role to ensure that all engineering problems are resolved thoroughly.
• Influence - you’ll need to be able to convince stakeholders at all levels of the business.

​

About You

We are on the lookout for a dynamic and skilled Senior Design Engineer to join our team. You will be enthusiastic about engineering and product design, bringing a robust technical foundation and a passion for developing innovative solutions. You take pride in your craft your craft and thrive in a fast-paced, collaborative environment. Key skills and attributes you will bring to the role include:

• A degree in a relevant engineering, product design, science discipline or equivalent.
• At least 2-3 years’ experience
• Sound understanding of basic mechanical/product design principles and the development of products and technologies through prototyping and testing.
• Proven ability to communicate through a variety of media.
• Ability to plan, prioritise and co-ordinate with work of others.
• Technical and personal credibility to work effectively in cross-functional design teams throughout the project development cycle.
• Basic knowledge and understanding of multiple tooling and manufacturing techniques.
• Proven experience of delivering creative design solutions that improve upon existing product designs.
• A creative and considered approach to problem solving, following clear design processes.
• Practical and methodical design development through hands on rig building, prototyping, and testing.
• Ability to plan ahead, prioritise tasks and coordinate with the work of others.
• Good commercial awareness with pragmatic approach to balance cost and value.
• A self-starter who thrives in a fast-paced, collaborative environment
• A passion for user focused design.

Dyson is an equal opportunity employer. We know that great minds don’t think alike, and it takes all kinds of minds to make our technology so unique. We welcome applications from all backgrounds and employment decisions are made without regard to race, colour, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other any other dimension of diversity.

We are seeking a Lead Application Support Engineer to to manage and oversee the smooth operation of critical applications, ensuring seamless user experience and system functionality.

• Competitive remuneration package (up to $6,300 + AWS + VB).
• Hybrid working arrangement.
• Leadership Role: Take charge of support operations and lead a dedicated team.

Responsibilities:

• Oversee and manage a 24/7/365 level 1 application support team, ensuring continuous support for both applications and systems.
• Participate in the recruitment and management of staff, including planning and organizing shift rotations.
• Train team members on the application's functionality, interface, and features, ensuring they are equipped to handle support tasks.
• Ensure team members provide adequate support to end-users, while also delegating tasks and responsibilities effectively.
• Take full ownership of all issues raised, ensuring they are resolved, regardless of which development team or vendor is responsible.
• Act as the primary point of contact for both technology teams and end-user clients on a day-to-day basis.
• Maintain and update a knowledge base of known issues, defects, and troubleshooting techniques, and ensure problem tickets are properly managed.
• Handle escalations effectively and manage client expectations to ensure smooth operations.
• Debug and improve application code when necessary to resolve issues or enhance functionality.

Requirements:

• Singaporean only.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Minimum of 3 years experience in relevant roles.
• Prior experience in supporting Web-based applications.
• Experience with some programming languages and willingness/ability to learn.
• Familiarity with IT industry practices and methodologies (ITIL foundation certification will be an added advantage).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

About the job

Company Description

Explore the future of communication and finance with Vama – a cutting-edge app that integrates instant messaging and secure payments, incorporating the latest Fintech technology.

Role Description

This is a full-time on-site role for a Software Quality Assurance Engineer at Vama in Singapore. The Software Quality Assurance Engineer will be responsible for software quality, quality assurance, software development, manual testing, and ensuring the highest quality of software across mobile (iOS and Android), desktop (React Electron), and cloud platforms (GCP). You will work closely with development teams to create and execute test plans, identify bugs, and ensure a seamless user experience.

Key Responsibilities:

• Designed, developed, and executed detailed manual test plans, test cases, and test scripts for iOS, Android, and React Electron desktop applications.
• Perform functional, regression, and exploratory testing to identify defects and ensure product stability and performance.
• Collaborate with cross-functional teams, including developers, product managers, and designers, to understand product functionality and requirements.
• Participate in test planning, estimation, and coordination of testing activities within an Agile development environment.
• Identify, document, and track bugs using QASE or similar test management tools.
• Verify bug fixes and ensure they meet the required specifications.
• Integrate testing processes with continuous integration pipelines (CircleCI) for improved development workflows.
• Ensure proper documentation of testing results and provide feedback for product improvements.
• Test cloud-based applications hosted on Google Cloud Platform (GCP), ensuring scalability and performance requirements are met.

Requirements:

• Experience in Manual Testing: Proven experience in manual testing across web, mobile (iOS/Android), and desktop (React Electron) applications.
• GCP Expertise: Strong knowledge of Google Cloud Platform (GCP) and testing cloud-based applications.
• Mobile Testing: Experience in testing mobile applications on iOS and Android platforms.
• Desktop Testing: Experience with desktop applications, particularly React Electron.
• Test Management Tools: Proficiency with QASE or similar test management platforms for documenting and managing test cases.
• Continuous Integration Tools: Hands-on experience with CircleCI or other CI/CD tools.
• Strong Analytical Skills: Ability to analyse complex systems, debug issues, and provide detailed reports.
• Attention to Detail: A meticulous approach to testing to ensure all edge cases are covered.
• Collaboration: Strong communication skills and ability to work in a team-oriented environment.

Qualifications

• Software Quality, Quality Assurance, and Software Quality Assurance skills.
• Experience in Manual Testing and Software Development.
• Strong analytical and problem-solving abilities.
• Knowledge of testing methodologies and tools.
• Effective communication and collaboration skills.
• Attention to detail and accuracy.
• Bachelor's degree in Computer Science or related field.
• Certifications in quality assurance are a plus.

Responsibilities:

• Supervise/perform fault diagnosis, trouble shooting and maintenance of power system/component in workshops and onboard vessels
• Liaise with various departments within company and client to expedite the scope of work
• Lead a team of electricians in corrective and preventive maintenance
• Prepare work completion reports for Customer’s Acceptance.
• Perform maintenance works in accordance with vessel safety requirement
• Conduct in-depth troubleshooting of electrical connections and Programmable Logic Controllers (PLC) programs.
• Coordinate with vendors and partners, conduct design reviews with customers, and maintain documentation according to our ISO quality systems.

Requirements:

• Diploma in Electrical Engineering
• 2-5 years of relevant experience in the Marine related or Oil & Gas industry
• Candidate with no experience may apply
• Experienced dealing with 440V Main switchboard, Distribution Boards, Transformer, Power Generator, Main Engine, Converter, Inverter Batteries, Fire alarm & flooding system and Ship Control Monitoring & Management System
• Experience in troubleshooting on various brands of PLCs (Panasonic, Omron, Allen Bradley, Siemens, Mitsubishi, ABB, etc.) is advantageous
• Proficient in selection and integration of sensors, pneumatic systems, Stepper and Servo Motors & control systems, Power Supply Units, other electrical hard wares, etc.
• Possess man management experience in leading up to 6 men, including Supervisors and Technicians
• Willing to work as a team player to achieve assigned task within given timeline.
• Comfortable with report writing
• Able to work onboard vessels and at heights

• Other Information:
  Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

As a Lead Design Engineer, you will be focussed on developing products depending on advanced robotics and artificial intelligence technologies. Within Upstream Robotics you will be a crucial member of a dynamic team to help meet and exceed the requirements of our products and embedded technologies. You will be working closely with other engineers, designers, scientists, specialists, downstream teams and other cross functional teams to create and develop new technology, product formats and business cases for projects in our portfolio.

What we need you to do…

• Designers will be expected to initiate new product concepts and ideas and identify market opportunities from a blank sheet of paper.
• Be responsible for leading key pieces of complex technology/product sub-assemblies that help to define the specification of future products;
• Produce working concepts for reviews with the use of handmade or prototype parts.
• Produce mechanical designs across a range of device types and technologies to deliver our product performance specifications while considering cost, manufacturing, and time delivery.
• Be responsible for 3D CAD and design requirements of mechanical systems of mechanical systems from concept, through evaluation to downstream delivery. Take an active role in defining design specifications for a given concept.
• Liaise and collaborate with the suppliers to develop innovative, robust and scalable technology platforms.
• Use hand calculations and/or computer simulation to validate designs through the development process, backed up with lab-based testing / characterisation / validation.
• Analyse test results, summarise and communicate these with both technical and non-technical colleagues.
• Challenge and develop Dyson engineering practices to continuously improve design quality.
• Define plans, monitor progress and report to management on technical risks.
• Take an active, hands-on role to ensure that all engineering problems are resolved thoroughly.
• Own/contribute to team/department level initiatives & change projects.
• Influence - you’ll need to be able to convince stakeholders at all levels of the business.

About you

• A degree in a relevant engineering, product design discipline or equivalent.
• 5+ years’ industry experience
• Sound understanding of basic mechanical/product design principles and the development of products and technologies through prototyping and testing.
• Proven ability to communicate through a variety of media.
• Ability to plan, prioritise and co-ordinate your work, and others
• Technical and personal credibility to work effectively in cross-functional design teams throughout the project development cycle.
• Basic knowledge and understanding of multiple tooling and manufacturing techniques.
• Proven experience of delivering creative design solutions that improve upon existing product designs.
• A creative and considered approach to problem solving, following clear design processes.
• Practical and methodical design development through hands on rig building, prototyping, and testing.
• Ability to plan ahead, prioritise tasks and coordinate with the work of others.
• Good commercial awareness with pragmatic approach to balance cost and value.
• A self-starter who thrives in a fast-paced, collaborative environment
• A passion for user focused design.

Nanyang Technological University’s ANT Group – NTU Joint Lab is a collaboration between ANT International and NTU. The partnership will explore privacy-preserving methods for large language models (LLMs) and will be overseen by a joint research committee.

We are looking for a Research Engineer II to involved in research and development collaboration with industry, on AI Safety and Trust Technology, especially on the topic of applying fully homomorphic encryption in privacy-preserving machine learning. The successful applicant is expected to be familiar with fully homomorphic encryption and its applications in AI models.

Key Responsibilities:

• Research and development of trust technologies such as privacy-preserving machine learning which are important components of digital trust platforms.
• Be involved in privacy-preserving machine learning and fully homomorphic encryption system development and implementation.
• Assist in preparation of reports and scientific papers.

Job Requirements:

• Master’s degree in computer science, mathematics, information theory or related field
• Participation in privacy, security, and trust related conferences and journals
• Good programming skill, preferably with experience in implementing cryptographic algorithms.
• Be familiar with the following programming languages: C/C++
• Good communication skill, self-motivated, and could deliver under tight schedule

We regret to inform that only shortlisted candidates will be notified.

Job Summary:

• Salary range : $4500 - $5500
• Working Days and Hours: Monday - Friday (8.30am - 6pm)
• Location of work: Somerset
• 1-month completion bonus upon completion of full year contract

Job Responsibilities:

• Responsible for conducting feasibility studies, market/customer needs analysis and financial analysis for electricity, utilities and related businesses. Specifically, the duties include:
• Conducting feasibility studies (Technical) of domestic and overseas projects/ investments, including economic (cost-benefit) analysis, project/ investment appraisal and project risk analysis
• Perform technical specifications review
• Provide engineering support for future developments of the group
• Participate in regulatory and statutory approval matters
  
  Requirements:
• Candidate must possess at least a Bachelor's Degree in Engineering (Electrical, Chemical, Mechanical)
• Minimum 5 years of relevant experience in Engineering/ Construction/ Oil & Gas industry
• Strong interpersonal communication and coordination skills

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON,

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Foo Kai Jing (Fiona)
Registration Number: R2199329
EA License No: 06C2859 (MCI Career Services Pte Ltd)

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

We are looking for a highly motivated individual with software development experience, to join a software company as Lead Application Support Engineer.

• Lead a team of engineers supporting world class custom software applications.
• Salary package up to $5,800 + AWS + VB (~2 months bonus).
• Dynamic working environment.

Responsibilities:

• Lead and run the 24/7 application support team for applications and systems.
• Ensures team members are providing necessary help to the end-users. Train the team members on the application logic/usage, interfaces and features.
• Solve critical issues of the application and system, guide and mentor team members.
• Ownership of all issues that are raised, through to closure within defined SLA.
• Build and maintain good rapport between stakeholders. Handle escalations and manage client expectations on an ongoing basis.

Requirements:

• Diploma/ Bachelor’s Degree in Computer Science or related.
• Minimum 3 years relevant working experience as a Software Developer/ Senior Application Support Engineer/ Team Lead.
• Strong analysis, research, investigation and evaluation skills, with a structured approach to problem solving
• Understanding of IT industry working practices / methodologies. ITIL certification is highly advantageous.

Interested candidates may click on apply or apply via email to [email protected] (indicating Job ID J50778 for faster processing).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

Job Summary

Responsible for engineering activities in product improvement/engineering projects; performs engineering analysis, equipment and process set up, carry out risk assessments and validations as well as production implementation for completed projects.

Job Responsibilities

• Participate in product improvement/engineering projects, and responsible for engineering activities.
• Take the lead in problem solving and action planning in project management.
• Perform risk analysis (FMEA) to define process flow and control plan.
• Perform equipment qualification and process validation for product improvement/engineering projects.
• Provide technical advice and guidance to junior engineers and other departments.
• ·Ensure projects are implemented in line with the schedule and budget.
• Optimize new/improved process parameters to further improve product quality and the overall equipment effectiveness.
• Explore new process to improve product quality or productivity.
• Be responsible for the successful transfer of new/improved process/methodologies into the production with good process margins and inline controls.
• Involved in hands-on execution of manufacturing operations.
• Provide operational training for operators or related personnel.
• Manage administrative duties as well as ad-hoc projects assigned by immediate superior.

Job Requirements

• Minimum a Bachelor Degree in Mechanical/Industrial/Manufacturing/ Biomedical Engineering related disciplines or equivalent.
• Good mechanical or material aptitude and knowledge.
• Good experience of manufacturing process and cGMP manufacturing.
• Experience of operational management and lean manufacturing.
• Clean room/environment control experience.
• At least 2 years of working experience in the related field.
• Excellent English-speaking & writing skills
• Multi-lingual: Chinese (Mandarin) to liaise with Mandarin speaking counterparts, other languages are an asset
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
• Ability to write professional reports, business correspondence, and procedure manuals.

Work Location

36 Jalan Tukang

Singapore 619266

Job Description & Requirements:

As a Frontend Engineer, you will be responsible for architecting and developing efficient, reusable, and visually appealing frontend systems for a trading application powered by AI models and LLMs. You'll work closely with cross-functional teams, including backend engineers, AI engineers, product managers, UI/UX designers, and the product design team to deliver a responsive, engaging user experience across web and mobile platforms. Your expertise will ensure a seamless blend of aesthetic and functionality.

Key Responsibilities:

• Architect, design, and develop efficient and reusable frontend systems (Web/Mobile)
• Collaborate with backend engineers, AI engineers, UI/UX designers, product managers, and other stakeholders to build comprehensive, architecturally sound, and visually appealing frontend solutions
• Optimize code to improve scalability, reliability, security, and performance of web and mobile applications
• Design interactive components, especially for chat-based and generative UI, to create dynamic LLM-powered user experiences
• Write comprehensive tests for all developed features to maintain software quality and reliability
• Documentation of design and architecture.

Qualification & Skills:

• Minimum 6 years of professional experience as a Frontend Engineer
• Expert in HTML5 / CSS3 / ECMAScript 6 + / TypeScript. Strong preference for candidates experienced with Tailwind CSS
• Proficient in modern frontend frameworks, including React and Vue, and/or React Native for mobile
• Skilled in state management tools such as Redux, Pinia
• Experience with API design principles, RESTful API integration and familiar with React Query
• Strong understanding of client-side performance, optimization.
• Deep knowledge of scalability, reliability, and security considerations in modern web development.
• Familiarity with LLM application development and generative UI/interactive components, particularly for chat-based applications
• Excellent collaboration and communication skills to work effectively across teams