Job Responsibilities:

• Lead Process Engineering and design, including process configuration and optimization studies
• Perform Process simulations and prepare Process/Utility Flow Diagrams, Heat and Material Balance and Utility Balances
• Create Piping and Instrumentation diagrams (P&IDs)
• Prepare datasheets for process equipment and instruments
• Conduct relief and blowdown studies, analyze relief load scenarios and calculate flare network requirements
• Perform process calculations for equipment sizing and line hydraulics
• Prepare Process design philosophies and operating guides
• Collaborate on Concept studies, Feasibility reports, Front-End Engineering Design (FEED) and detailed design projects

Job Requirements:

• Bachelor's Degree in Chemical Engineering
• At least 15 years of relevant engineering design experience
• Good experience with Offshore FPSO, Oil and Gas, and LNG terminal projects. Experience on Energy transition projects will be an advantage
• Leadership experience in managing process teams for Hydrocarbon projects - Concept studies, Front-End Engineering Design (FEED), and detailed design projects
• In-depth understanding of process design, heat and material balance and P&IDs
• Preference given to candidates with Lead Engineer / Area Lead Engineer experience
• Familiarity with international codes and standards, software and tools

• Manage and drive z/OS Unix (Mainframe Access Management operations and audits).
• Lead the completion of z/OS initiatives such as MFA and straight through processing for IDM processing requests.
• Automate manual processes through scripting or via zSecure.
• Possess strong knowledge of designing and reviewing RACF access groupings.
• Min 8 years of experience working in a z/OS environment including experience with REXX, Assembler, COBOL, JCL, TSO/ISPF
• Experience with system automation and scheduling tools such as IBM System Automation, Netview, IBM Tivoli Workload Scheduler(OPC).
• Experience with zLinux and zVM will be advantageous
• Support of third party software such as FileAid/Expediter, IBM Omegamon, RMF, ChangeMan
• Solid experience in mainframe security, RACF access controls, IBM zSecure, MFA
• Install, configure, and upgrade z/OS and subsystems using SMP/E
• Monitoring system performance and perform system tuning
• Technical support for z/OS and subsystems including engagement of IBM and vendors for problem determination and resolution
• Automation support and maintain SOP documentation
• Support backup/recovery and disaster/recovery planning and testing
• Support periodic system configuration reviews and audit reviews
• Strong communication skills and the ability to work collaboratively in a team environment
• Minimum of 5 years of experience in Mainframe Security (RACF) administration/operations provided by z/OS UNIX system services (USS), CICS, DB2, and WebSphere MQ with hands-on regulatory compliance knowledge.
• Good to have strong experience with using zSecure Admin and zSecure Audit modules.
• Good working knowledge of Access Management lifecycle and processes.

• Support on Wintel & virtualization infrastructure.
• Knowledge and experience in operations of virtual technologies such as VMWare
• Windows Server OS administration and support
• Server administration such as Active Directory, DNS, Databases, IIS security configuration and patching, and Backup/Restore
• Troubleshooting of VMWare, MS Windows technologies, AD, clustering and MS NLB (Network Load Balancing) especially troubleshooting.
• Experience or working knowledge of Disaster Recovery technologies helpful.

JOB SCOPE

• Assist the manager in managing the iSeries Product and Operation Services.
• Manage the iSeries operations activities to meet the OLA/SLA.
• Develop and update of Standard Operational Procedure, Operation Procedures.
• Provide iSeries support to both IT and business user.
• Manage and escalate system operation and application issues timely to management.
• Ensure all System Backup activities are completed successfully.
• Ensure System Disaster recovery readiness and successful execution of DR testing.
• Manage the High Availability iSeries System environment.
• Pro-active monitoring and maintenance of multiple iSeries servers and applications.
• Manage the Risk and Security & Vulnerability remediation for iSeries in compliance to the security best practices.
• Manage third party software, ensure they are updated according to the support lifecycle.
• Responsible for Firmware and OS upgrades, Performance Tuning, Capacity Planning, PTF installation.
• Work with multiple vendors on the implementation of iSeries support, lifecycle upgrade and project.

JOB REQUIREMENTS

EDUCATION

• Degree in Information Technology / Services related curriculum preferred
• Additional experience may be substituted in lieu of a degree

CERTIFICATION

• Formal IBM iSeries training and/or IBM certification preferred
• Formal training and certification in System Management, e.g. ITIL foundation

REQUIRED EXPERIENCE

• Minimum 10+ years hands-on experience in an iSeries environment
• Experience in managing iSeries AS400 operations.
• Experience in ITIL and processes in Service Request, Incident, problem and change management.
• Experience of one or more of the following:
• Remote Journaling / High Availability concept.
• Backup and Recovery on Flashcopy, BRMS, Safe Guarded Copy, NIM for VIOS backup.
• Security management in iSeries System and Application, user profiles, object authorities, system values .
• IBM i OS V7R3, V7R5, IBM VIOS Virtual Machine Environment.
• IBM PowerHA, ASP & iASP Disk configuration and administration.
• IBM EIM implementation for Single Sign on.
• 1 or more system replication software – e.g. iTera, Assured Mimix.
• Network configuration for TCP/IP protocol, Route and Host Tables, Firewall Rules.
• IBM SAN storage and SAN Switches, FC multipath configuration.
• System performance tuning, performance, and alert monitoring.
• Firmware, Patch, PTF, CUM Package ordering/installation.
• Query/400 – SQL/400, DB2 and performance tuning.
• Third party software, e.g. iTera, Assured Mimix, Optimizer, Fortra Powertech Exit Point, Authority broker, compliant monitor, Antivirus, System monitoring tool.
• Working knowledge on ACSC and Infinium advantages.

REQUIRED KNOWLEDGE

• IT processes, policies and procedures.
• Hand on experience and knowledge of iSeries application structure, operating system, installation specifications, troubleshooting, problem determination and data restoration techniques.
• Knowledge of and experience in personal computers and Microsoft products.
• Mature and strong leadership skill to lead both technical and service operation management.
• Enthusiastic and a strong desire to learn, quick leaner to adopt to fast changing environment.
• Organized and detail oriented. Ability to apply knowledge into practical support, identified and resolve potential pitfall upfront to avoid costly rework and service impact.
• Strong ability in handling multiple tasks stream, ability to priority critical / important task.
• Ability to perform troubleshooting with multiple technical team.
• Must be able to meet the attendance guidelines of the job and adhere to departmental and company policies.
• Possess excellent communication skills; able to read, write and speak English.
• Must be willing and available to work on remote standby duty including occasional weekends when required.

Marina Bay Sands is committed to building a diverse, equitable and inclusive workforce, providing equal opportunities as we grow our talent base to match our growth ambitions in Singapore. Our employees are committed to adhere to and abide by all rules, regulations, policies and procedures, including the rules of conduct and business ethics of the Company.

Position: Production Engineer / Executive

• Location: Tanjong Penjuru
• Working hours: Mon to Fri from 7:30am to 5pm
• Salary: $3,500 - $4,000

Requirements:

• Min 5 years working experience in manufacturing environment.
• Able to supervise and lead the subordinates.
• Computer literate.
• Knowledge in ISO is an advantage.
• Diploma or Degree in Manufacturing / Electrical /Mechanical / Engineering discipline

Responsibilities:

• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with the HR Department and assure that employee grievances are addressed in a timely fashion.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.
• Maintain and ensure work safety and practice. Also continually improve safety records by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas
• Evaluate, train and maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Ensure on time submission of overtime record to HR Dept for computation of monthly salary
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in the hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

To assist in the daily production operation, ensuring schedules of customer is met.

Create and develop quality reports based on drawings

Maintain measuring instruments calibration list.

Liaising with customers and suppliers

Fresh graduates are welcome to apply

Willing to learn and explore

Friendly environment

Engineering graduates prefer but open to others Diploma/ITE also

Versatile to different roles in the company

· Development experience with a scripting language (such as Shell Scripting or Python)

· A grounded understanding of Git branching, merging, and pull requests

· Hands-on experience with one or more of the following DevOps toolchains (or equivalent): o Jenkins, Git, Artifactory, Docker, Ansible, SonarQube

· Experience with IaaS or PaaS systems such as: o AWS, Google Cloud, Azure Cloud Foundry, OpenShift/Kubernetes, OpenStack

· Fundamental understanding of networking, firewalls, load balancing, forward and reverse proxies

Familiarity with concepts such as: Agile methodologies, Test-Driven Design, Behavioural-Driven Design, and 12 factor application design

If you're interested in this role, please email your latest CV to [email protected]

Other than that you can click 'apply now' to forward an up-to-date copy of your CV.

If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion on your career.

EA License Number: 20C0199 | Company Registration No: 201913897K

Industry: Precision Engineering Manufacturer
Location: West
Working Hours: Monday Friday, 8.30am- 5.45pm
Basic + Allowances + AWS + VB

Responsibilities:

• Responsible for automation engineering systems & processes per safety and performance standards to build products.
• Establish performance & quality criteria via validation (IQ, OQ and PQ) by FEED (Front End Engineering Design), testing, installation, commissioning & handover for production.
• Work closely with internal team for technical solution, design experiment, validation, qualification procedure & check list to ensure products meet governance, company & customer requirements.
• Create testing protocol, run test for concept approval, analyze results, update activity logs & document results.
• Monitor compliance with safety and quality regulations.
• Calibrating and repairing machine & equipment.
• Participate in cross functional team for product failure root cause analysis and automation system Continuous Improvement.
• Design new machines & auxiliary equipment maintenance procedures, check list & work instructions, provide training for operation & maintenance staffs.
• Collaborate with internal and external process FMEA and Machine qualification.
• Collaborates with suppliers and in-house complete all FAT and SAT requirements within the delivery date.
• Perform Lean principle (5S, Gemba-walk, 5-why and B&A suggestion improvements)
• Submit and Follow-up qualification with QA and Production staff
• Any other duties as and when assigned
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Diploma / Degree of Engineering in Automation / Mechatronics / Mechanical / Electrical or equivalent.
• Previous 3-6 years experience as a validation engineer or in a similar role.
• Experience in project management.
• Strong understanding of automation engineering system design concept & development, manufacturing processes and safety regulations.
• Excellent mathematical and analytical skills. Attention to detail.
• Knowledge of statistical software analysis (e.g., MINITAB, MATLAB)
• Well versed in Microsoft office tools (Excel/ Word / Power point)
• Have knowhow in Process Failure Mode Effect Analysis (PFMEA) and CPK study.
• Leadership, ownership, team player, self-motivated.
• Attention to details and eager to learn new technology.

Please send your updated CV to [email protected]

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

We regret that only shortlisted candidates will be notified

EA Personnel: Lim Jing Yee, Lena
EA Registration No.: R1872533
People Profilers Pte Ltd
20 Cecil St, #08-09, PLUS Building, Singapore 049705
EA Licence Number: 02C4944
Tel: 6950 9755
JOBID: L4W33367

Job Description:

• Responsible for on-site technical and engineering matters.
• Supervise & coordinate day-to-day site works, including sub-contract works, safety and quality control.
• Site inspection & upkeep site record.
• Liaise with consultants, client etc.
• Other duties assigned by Site Manager / PM.

Requirements & Qualifications:

• Graduate Bachelor in Engineering (Civil) or equivalent.
• 3-5 years work experience in Building Construction.
• Able to work independently.
• Autodesk Revit MEP experience will be an advantage

• Develop, maintain and administer tools which will automate operational activities and improve engineering productivity
• Identify industry best practices/solutions and pursue continuous improvement opportunities in SDLC / SDLC2 (Software Development Life Cycle) processes and practices, relentlessly drive for standardization, automation and self-services.
• Develop reusable, scalable, and testable automation scripts and tools for routine and repetitive tasks.
• Drive alignment efforts between development and operations teams to better recognize benefits of automation and cloud.
• Ability to research, propose and prototype new principles, technologies, tools and concepts and integrated them into the teams collective knowledge.
• Developing CI/CD roadmap and implementing to the projects. Help on AGILE/SCRUM Methodologies while execution.
• Manage and builds EAPI with Unit testing, Code Coverage, Enhancements. Same promote to Production through Jenkins CI/CD Pipeline.
• Configure OSS, Sonar, Fortify through continuous integration and commit based Scan for Quality Assurance. enable the automation testing and load testing.
• Automate continuous delivery and on-demand capacity management solutions
• Developing configuration and infrastructure solutions for internal deployments
• Troubleshooting, diagnosing and fixing software issues
• Updating, tracking and resolving technical issues
• Suggesting architecture improvements, recommending process improvements
• Evaluate new technology options and vendor products. Ensuring critical system security through the use of best in class security solutions

The ideal candidate should possess:

• Bachelor’s degree in computer science, Engineering, Information Technology, Electrical / Electronic, Information Systems or equivalent discipline

• 5 - 10 years of relevant experience in security surveillance hardware and software administration, configuration, network design, and troubleshooting

Roles & Responsibilities:

 Work with system architect and pre-sales team to implement security surveillance systems and network infrastructure solutions in-premise and able to articulate and document the solution.

 Analyze, plan, implementation (network, system, infra, applications), testing, and management of a state-of-the-art integrated perimeter, video surveillance and video analytics security system

 Good knowledge and hands on experience working with software and hardware systems in the area of:

• IP CCTV System

• Fence Intrusion Detection System (FIDS)

• Physical Security Information Management System (PSIM)

• Video Management System (VMS)

• Data Protection

• Identify and Access Management

• Windows Server OS, Linux OS in a virtual environment

• Virtualisation and Hypervisors

• Network Monitoring

 Work, liaise and lead inter-disciplinary technical team and stakeholders to design, implement and verify solutions to meet project requirements for performance.

 Works with partners to diagnose and rectify technical issues as well as support preventive and corrective maintenance

 Develop technical implementation timeline with critical path that complements project management schedule.

 Collaborate with respective key vendors/partners to design and review the proposed solution architecture in accordance with standards and policies.

 Understands technical documentation, installation manuals, system drawings and able to orientate construction drawing, floor plan, etc.

 Ensure the project User Acceptance Tests are conducted successfully accordance to requirements

 Proficient in electrical power and good knowledge on power cabling works for on-site works

 Attend customers meetings, report regularly on progress and monitor project progress

 Liaise with customers/consultants/project managers concerning approval of designs, reviews, progress of work, problem solving, etc.

 Determine and define clear deliverables, roles and responsibilities of technical engineers in a project to ensure all are actively working toward established milestones and ensuring work complete on time on schedule.

 Assists maintenance team to ensure System Availability and Reliability meets customers’ requirement

 Conduct Root Cause Analysis of system issue and failures and recommend solutions.

 With knowledge on construction site safety and regulatory requirements

 Understanding of financial reporting, budget tracking, and project cost management

 Attain key certifications for partnership with key vendors

Personal Attributes

• Positive work attitude, self-motivated, creative, and resourceful with a customer first mind set

• Independent, hardworking, and able to work under pressure

• Able to handle emergency situations outside of normal work hours when required

• Good inter-personal, organizational, problem solving and teamwork skills.

Responsibilities :

• Working with development teams and product managers to ideate software solutions. 
• Designing client-side and server-side architecture 
• Building the front-end of applications through appealing visual design Developing and managing well-functioning databases and applications Writing eAective APIs 
• Handling the client-side and server-side operations in web development 
• Troubleshooting 
• Communicating with the project team 
• Staying updated with the industry trends 
• Building a scalable, reliable, functional and secure application/software
• Implementing new features 
• Making modifications and fixing bugs in existing code 
• Designing and developing layouts 
• Developing tests for the code you write 
• Writing code optimized for mobile 
• Developing databases and services for functionality
• Translating designer mock-ups and wireframes into front-end code

Requirements and skills :



• Proven experience as a Full Stack Developer or similar role  Experience developing web applications for both desktop and mobile 
• Expertise developing applications using React, Redux, Express and NodeJS. 
• Knowledge of multiple front-end languages and libraries (e.g. HTML/ CSS, JavaScript, XML, jQuery) 
• Knowledge of multiple back-end languages (e.g. Java, Dart) and JavaScript frameworks (e.g., Angular, React, Node.js)
• Familiarity with databases (e.g., Postgres, MongoDB), web servers (e.g., Nginx) and UI/UX design 
• Excellent communication and teamwork skills 

Scope of work requested for the services is to provide system support (level 1/2) to manage Government agency servers. It includes the following:

1. Incident Management

a. Monitoring new incidents

b. Working on incidents assigned

c. Troubleshoot and resolve system issues

d. Timely follow-up and closure of incidents

e. Updating and resolving incidents status in ITSM system

2. Service Request Fulfilment

a. Monitoring of new service request (SR)

b. Work on SR assigned

c. Setup and configure new systems

d. Hardening of OS and applications

e. Timely follow-up and closure of SR

f. Updating SR status in ITSM System and closure of SR

g. Updating Asset Management team on asset issued / returned

3. Monthly Patching

a. Patching of systems

b. Testing upon completion of patching

4. 24 x 7 standby support

a. 24 x 7 standby support and to go onsite as and when required

5. Daily health check / Escort vendor

a. Daily health check and submission of daily health check report

b. Escort vendor when request are raised

6. Other tasks

a. Conduct any other tasks as required of a system engineer role

6 PERSONNEL REQUIREMENTS

6.1 The Contractor’s support personnel managing the servers must be trained and minimally be proficient in the following areas:

Windows Server

(a) The System Engineer shall minimally possess the following requirement:

(i) At least three (3) years of experience in Microsoft Server administration;

and

(ii) Microsoft Certified Solutions Associate (MCSA);

• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in geotechnical, Dwall and deep excavation works

- Degree in Civil Engineering

- Accredited as a RE with IES

Job Responsibilities:

• Pre-plan and prepare construction schedule, and coordinate activities.
• Follow up and report On-site and Off-site project management and progress.
• To prepare and submit progress reports as required by consultants and clients.
• Analyse project specifications, including civil/structural, architectural, and M&E drawings.
• Conduct thorough monitoring of construction work activities and prepare daily, weekly, and monthly site reports.
• Maintain a safe and clean working environment, ensuring adherence to standard rules and regulations.
• Perform other project related administrative duties assigned.
• Coordinate, prepare and arrange site inspection with RE & RTO.
• Arrange daily Toolbox Meeting with Site Supervisor and WSHC and briefing on site activities and daily task. Arrange Site daily activities with Site Supervisor.
• Attend monthly, weekly safety meeting and site works with Client.
• Prepare necessary submission for project. Example, RFI, MS, RA, SWP, shop drawings and supporting documents preparation.
• To prepare and keep records, summary related to project. Maintain Project documents control for ISO purpose.
• Organise the team to attend to emergency defects on Sundays and Public Holidays (Emergency Recovery Work)

Job Requirements:

• Minimum Bachelor's degree in Civil Engineering only.
• Minimum 2 to 4 years of work experience in infrastructural or marine construction industry. However open to fresh graduate to apply.
• Relevant project experiences in dredging, reclamation or near shore construction will be preferred.
• Knowledge of construction methods, materials, and BCA regulations.
• Daily sea travel to island work site is mandatory.
• Working hour from 7am to 7pm from Monday to Saturday (Depends on project requirements).
• Willing to work on Sunday or Public Holidays as per project requirement. (Emergency Recovery Work)
• May require to assist in variable projects.
• Own travel vehicle will be advantageous.
• Strong organizational and communication skills.
• Ability to work well under pressure and in a fast-paced environment.

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, please click to apply. joey.teo(a)bayesrecruitment.com

Bayes Recruitment Pte Ltd

16 Collyer Quay, Singapore 049318

bayesrecruitment.com

EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

The Digital Health Accelerator (DHA) is led by A*STAR, Ministry of Health (MOH) Singapore, SingHealth, National Healthcare Group (NHG), and National University Health System (NUHS). DHA supports innovators in driving adoption and scaling of market ready or near-market ready digital health solutions. DHA is hosted by Singapore's Diagnostics Development Hub (DxD Hub).

The DHA integration engineer is responsible for planning and developing workflow and technical interfaces between healthcare IT systems. She/He will work with DHA Project Managers, Solution Architects, health systems and companies to accomplish this objective. She/He may also be called upon to advise other developers on integration standards.

Responsibilities:

• You’ll be involved in the development, design, build, testing, and go live phases of multiple integration projects.
• This includes scripting to conform / transform to another systems specifications.
• You will also work with internal teams to continuously improve processes and procedures around deployment of interoperability products that communicate in HIT standards-based formats such as HL7, IHE Profiles, Direct, or SMART on FHIR.
• The Integration Engineer oversees the development of new interfaces and maintain the sandbox environment up to date for application testing.

Requirements:

• Bachelor’s degree in information systems, Computer Science, Engineering, Computer Information Systems, Management Information Systems, or equivalent experience
• 3+ years’ experience in HCIT integration using established and contemporary interoperability standards (e.g. HL7, SMRT, FHIR)
• Experience with SQL and relational databases, and communication using secure protocols.
• Ability to work in a team environment alongside developers and deployment teams.
• Utilise engines like Mirth Connect or Rhapsody to have a standard way of integration using both HL7 and DICOM
• Knowledge in developing and configuring Context Launch requirements according to AES 256 standards.
• Assess and customise integrations (HL7 / FHIR / DICOM) based on the project to specific workflow.
• Experience with cloud deployments and/or pipelines, especially Pivotal Cloud Foundry
• Experience with popular healthcare integration engines with ability to recommend and/or select different integration approaches depending on the desired outcomes for the system.
• Strong communication skills and ability to work with project stakeholders from different backgrounds (e.g. technical, clinical)
• Experience integrating with Singapore public hospital technical stack and working with Synapxe are a plus.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Digital Health Accelerator (DHA) is led by A*STAR, Ministry of Health (MOH) Singapore, SingHealth, National Healthcare Group (NHG), and National University Health System (NUHS). DHA supports innovators in driving adoption and scaling of market ready or near-market ready digital health solutions. DHA is hosted by Singapore's Diagnostics Development Hub (DxD Hub). The DHA integration engineer is responsible for planning and developing workflow and technical interfaces between healthcare IT systems. She/He will work with DHA Project Managers, Solution Architects, health systems and companies to accomplish this objective. She/He may also be called upon to advise other developers on integration standards.

Responsibilities:

• You’ll be involved in the development, design, build, testing, and go live phases of multiple integration projects.
• This includes scripting to conform / transform to another systems specifications.
• You will also work with internal teams to continuously improve processes and procedures around deployment of interoperability products that communicate in HIT standards-based formats such as HL7, IHE Profiles, Direct, or SMART on FHIR.
• The Integration Engineer oversees the development of new interfaces and maintain the sandbox environment up to date for application testing.

Requirements:

• Bachelor’s degree in information systems, Computer Science, Engineering, Computer Information Systems, Management Information Systems, or equivalent experience
• 5+ years’ experience in HCIT integration using established and contemporary interoperability standards (e.g. HL7, SMRT, FHIR)
• Experience with SQL and relational databases, and communication using secure protocols.
• Ability to work in a team environment alongside developers and deployment teams.
• Utilise engines like Mirth Connect or Rhapsody to have a standard way of integration using both HL7 and DICOM
• Knowledge in developing and configuring Context Launch requirements according to AES 256 standards.
• Assess and customise integrations (HL7 / FHIR / DICOM) based on the project to specific workflow.
• Experience with cloud deployments and/or pipelines, especially Pivotal Cloud Foundry
• Experience with popular healthcare integration engines with ability to recommend and/or select different integration approaches depending on the desired outcomes for the system.
• Strong communication skills and ability to work with project stakeholders from different backgrounds (e.g. technical, clinical)
• Experience integrating with Singapore public hospital technical stack and working with Synapxe are a plus.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

We are seeking for a research engineer to join our research team to work with PIs and co- PIs in the Department of Civil and Environmental Engineering and the Department of Architecture. This position's primary focus is developing tour-based destination choice models for Singapore’s future land use and transport systems using data-driven approaches.

Key responsibilities include:

• Collecting and analyzing relevant data;
• Designing tour-based destination choice models;
• Integrating developed models into Singapore’s existing tour-based transport framework;
• Working on research projects, supervising research students, and preparing research proposals and reports.

Job Requirements

• Possess a Bachelor and or MEng/MSc degree in a related discipline (transportation engineering, operations research, computer engineering/science, or related disciplines).
• Masters graduates without experience are welcome to apply.
• Candidates should demonstrate a strong expertise in discrete choice modeling, statistical modeling, and machine learning methods.
• Strong interest and expertise in discrete choice modelling, statistical modeling, traffic simulation, machine learning, and optimization techniques.
• Proficiency in transport planning software such as EMME or PTV Visum.
• Programming expertise in at least one language, e.g., Python, Java, or C++.
• Strong written and oral communication skills.
• Open to fixed term contract.

Responsibilities

• Design, Code, and Test Siemens PLC Systems: Utilize the TIA portal to design, code, and test Siemens PLC systems, ensuring they meet project specifications and industry standards.
• Pharmaceutical Industry Experience: Apply your knowledge of the pharmaceutical industry to develop and implement PLC solutions that comply with regulatory requirements and enhance operational efficiency.
• Desigo CC System: Work with the Desigo CC system to integrate and manage building automation and control systems.
• BMS/PCS Expertise: Leverage your expertise in Building Management Systems (BMS) or Process Control Systems (PCS) to support various projects and ensure seamless integration with other systems.
• Hardware Design and Engineering: Design and engineer hardware components for PLC systems, ensuring they are robust, reliable, and meet project requirements.
• Site Support and Troubleshooting: Provide on-site support and troubleshooting for PLC systems, addressing any issues that arise during installation, commissioning, and operation.
• Interface with Other Systems: Ensure PLC systems interface effectively with other systems, including SCADA, HMI, and other automation and control systems.
• Project Execution: Manage and execute PLC projects from inception to completion, ensuring they are delivered on time, within budget, and to the required quality standards.

Requirements

• Experience: 4-6 years of relevant experience in Siemens PLC engineering, with a focus on the pharmaceutical industry.
• Technical Skills: Proficiency in using the TIA portal for PLC design, coding, and testing. Experience with the Desigo CC system and BMS/PCS is highly desirable.
• Problem-Solving: Strong troubleshooting skills and the ability to provide effective on-site support.
• Communication: Excellent communication skills, with the ability to interface effectively with clients, project teams, and other stakeholders.
• Project Management: Proven experience in managing and executing PLC projects, with a track record of delivering successful outcomes.
• Certifications: Relevant certifications in Siemens PLC systems, BMS, or PCS.
• Industry Knowledge: In-depth knowledge of regulatory requirements and best practices in the pharmaceutical industry.

Responsibilities

Data Domain Management

• Interpret business workflows and data requirements.
• Conduct data exploration and create entity relationship diagrams.
• Develop data models and manage ETL processes.
• Create and service data pipelines.

Data Platform Operations

• Set up, install, and manage access controls.
• Monitor and maintain data pipelines to ensure quality data outputs.
• Validate data fusion processes for safe use.
• Data Platform Upgrade and Migration:
• Design, develop, and implement robust processes and automation.
• Conduct testing (unit testing, SIT, UAT) and implementation.
• Ensure secure and efficient data fusion, exploitation, and sharing.

Documentation and Administration

• Maintain data dictionaries and workflow processes.
• Report for Data Incident Concierge (DIC) and other documentation.
• Handle paperwork for data administration, including asset management and procurement of tools.

Collaboration and Continuous Improvement

• Collaborate with partners and cross-teams to benchmark best practices.
• Drive continuous improvement in data interpretability and searchability.
• Develop and maintain tools such as Microsoft Purview.

Requirements

• Minimum 4 years of hands-on experience in data engineering, systems implementation, or equivalent roles.
• Experience in data integration, analytics, system integration, and working on data pipelines.
• Knowledge of information management practices, including data lifecycle management, data modeling, and master data management.
• Experience in gathering requirements for data warehouses or similar systems.
• Familiarity with Change Management, Risk Management, and Incident Management.
• Experience supporting relevant Government Projects and understanding Government Data Governance Standards and Regulations (e.g., IM8, PSGA).
• Experience in public health or epidemiology is advantageous.

Technical Skillset

• Proficient in PySpark, SQL, and/or Python.
• Experience with large datasets.
• Proficiency in Microsoft Azure and Power BI is advantageous.
• Agile or other Project Management Methodology certification is a plus.

Key responsibilities

• Responsible for test and measurement businesses in the assigned territory.

• Formulate and implement market segments & territory sales plan to achieve growth targets.

• Derive and execute action plans to develop new markets and penetrate accounts.

• Establish strategic partnerships with government organizations, research institutions, universities, and key accounts.

• Coordinate with business units and marketing teams in new product launches and pursue opportunities in emerging technologies.

• Drive continuous improvement in the selling process such like planning, forecasting and productivity.

• Collaborate closely with cross-functional teams to deliver sales objectives.

Job requirements (education or experience and skills required to be able to perform this job)

• Degree in Electronic/Electrical Engineering or equivalent.

• Preferably 2-3 years of technical sales/application experience in the test and measurement industries.

• Highly-motivated and success-driven.

• Strong communication and interpersonal skills.

• Strong time management, problem-solving and analytical skills.

• Exercises strong initiatives, assumes ownership and ability to perform under significant pressure.

• Possess a valid driving license with own vehicle.

• Candidates in technical roles with strong aptitude for sales are welcome to apply.

About your role

• Serve as the technical expert and trusted advisor to manufacturing customers around automation solutions
• By applying subject matter expertise, you build and maintain client relationships and solve their complex automation challenges
• Collaborate with sales and technical team members to help identify, progress, and close commercial opportunities
• Develop sales processes and build relationships with stakeholders to design and offer solution that solve customer pain points
• Attractive commissions will be awarded

Requirements

• Experience in robotic engineering and simulation work is preferred
• Strong understanding of robotics and automation related products
• High willingness to learn and take ownership
• Ability to effectively communicate product value propositions, negotiate commercial contracts, and close deals
• Comfortable with travelling internationally for work
• Ability to take initiative and self-manage to achieve key objectives and company KPIs

• 5 years Gray box QA
• Proven experience black box testing Client-Server products with a focus on Server/API testing
• Demonstrated ability to write automation - we currently use Python
• Experience testing RESTful APIs
• Proficiency in an object-oriented language like C#, Java, JavaScript, Perl, Ruby, or Swift
• Experience traversing Unix directory structures; use basic Unix commands to scrape log files
• Experience scrapping customer logs and web searches to design tests cases as end user would use it
• Acquaintance with continuous integration/deployment
• Familiarity with static code analysis tools
• Experience with basic database queries

Our client is a distributor of automotive and industrial solutions.

• Manage and configure infrastructure systems and applications, network devices, desktops, mobile devices, and remote devices.
• Ensure automatic system backups, successful execution of recovery and disaster recovery plans, application of patches, and closely monitor system resource usage.
• Collaborate with external vendors to ensure compliance with Service Level Agreements (SLA).
• Research and source products, solutions, and vendors for ongoing projects.

Requirements:

• Diploma in Computer Science/Information Technology or equivalent.
• At least 2 years of relevant working experience.
• Skilled in enterprise networking, with expertise in WAN, LAN, and VPN optimization, implementation, and support.
• Knowledgeable about Alcatel PABX, FortiGate devices, Cisco Systems, and Unifi Wireless AP Controllers.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740