Job Description:

• Provide onsite client support, assisting with troubleshooting and design, configuration and escalated problem management.
• Technical subject matter expert for Cisco ACI network domain, providing technical leadership and mentorship to the team.
• Analysis of client and technical requirements, specifications development, solution design and development, and consult on testing and deployment processes for staging requirement.
• Manage client’s day 2 network operations in the Cisco ACI network landscape and other network technologies as assigned.
• Mandatory requirement: to succeed in this role, you must have experience in Cisco ACI project implementation or configuration.
• Comfortable with occasional support in outdoor environment (due to data center/ network equipment location).

Key Requirements:

• At least a CCIE or experienced Technical lead/ Subject Matter Expert who is experienced in enterprise routing and switching, data center network and architecture, and network security
• Proficient in troubleshooting Layer 2 and 3 network issues.
• Experience and proven hands-on installation and support in network devices covered in this contract.
• In-depth understanding of network protocols, architectures, and technologies, including TCP/IP, DNS, DHCP, VLANs, and routing protocol such as BGP, OSPF, EIGRP;
• Experience in Data Centre Network (Routing, switching), Cisco Application Centric Infrastructure (ACI)/Software Defined Network (SDN), Cisco ISE Servers.
• Experience in managing, administration, troubleshooting and maintenance of Nexus Switches and Software Defined Network such as Cisco ACI, DNAC and SD-WAN;
• Proficient in managing, administration, troubleshooting and maintenance of Firewall Systems in high availability mode. Firewall administrator certification such as either Palo Alto Networks Certified Network Security Administrator (PCNSA)or Check Point Certified Security Administrator (CCSA) is recommended.
• Experience in troubleshooting 4G and 5G Customer Premise Equipment (CPE) connectivity issue with telco service provider. Proficient in engagement, analyze and feedback on the service report furnished by service provider on their 4G and 5G cellular performance.
• Experience in managing, administration, troubleshooting and maintenance of load balancers.
• Experience in disaster recovery activation and deactivation exercises;
• Proficient in using sniffer tools to capture the network traffic and analyst the packets;
• Proficient in installing, troubleshooting and maintaining network management software.
• Proficient in configuring and managing network monitoring and management platform, e.g., SolarWinds, ServiceNow, etc.
• Proficient in creating Ansible Playbooks.

Please send your detailed resume in MS Word format to [email protected] with

• Education Level
• Working experiences
• Each employment background
• Reason for leaving each employment
• Last drawn salary
• Expected salary
• Date of availability

Job Description

• Liaise with respective functions to prepare project planning and progress report as and when required by authorities or clients and consultants.
• Ensuring projects meet agreed specifications, budgets or timescales
• Supervision of sub-contractors’ project execution processes.
• Attend technical meeting with authorities and consultants
• Ensure safe work procedures are implemented to control risk
• Familiar with relevant legal requirement
• Other duties as and when assigned

REQUIREMENT:

• Candidate must possess at least a Bachelor's Degree in Civil Engineering or equivalent.
• Required skill(s): MS Office, MS Project, AutoCad.
• Ability to work independently with minimum supervision and to meet tight deadlines
• Good team player

"• Extensive knowledge garnered working as a Data Center Operator
• Thorough knowledge of Data Center Operations with strong knowledge of Operations methodology.
• Experience in eye-ball checking of system faults and failures
• Good technical knowledge on Data Centre monitoring tools.
• Possess an in-depth knowledge of data center infrastructure technology and components for installation.
• Strong written and excellent communication skills.
• People are ready to work 12 hour shift patterns with and Day and night combination
• People are ready to work alone and can join in next 30days"

• Responsible for electrical and instrument preliminary and detailed design, costing, procurement and execution for M&E projects
• Conduct engineering design work of electrical including load calculation, SLD design, cable scheduling, cable routing, instrument hookup and etc.
• Work out the BOM, Budget & Schedule
• To monitor and update project schedule
• Implement the project by installation, testing & commissioning at sites
• To manage a team of electricians or sub-contractors for installation
• To manage the procurement, storage, and usage of materials at site
• To manage and supervise the clearance of punch list
• To work out as-built drawings
• To prepare document for submission and handover to clients
• Other ad-hoc duties

Requirement

• Bachelor's Degree in EEE, or E&I
• Preferably Proficent with AutoCad
• Min 3 years of working experience in M&E construction field
• Able to work independently and a team player
• Excellent communiation skills

Title: System Engineer

For quicker response, plz share your resume to [email protected] or WA at +65 92333815.

JD:

• Windows system administration, including PowerShell scripting, system hardening, patching etc.
• Linux (SuSE and Redhat) system administration, including shell scripting, system hardening, patching etc.
• Virtualisation (VMware) administration, including provision of resources, hardening, patching etc.
• Knowledge in Security Remediation process (vulnerability assessment and patch management)
• Commercial Clouds (AWS, Azure and GCP)
• Infrastructure troubleshooting (server, network and etc)

Requirements

• Strong background in IT, Computer Science / Computer Engineering, or related discipline
• Minimum 3 years of relevant working experience in the above technology is preferred.
• Working with Docker Containers and Kubernetes
• Setting up and managing commercial cloud platform such as AWS, Azure or GCP
• Infrastructure As Code, IT Automation Tool such as Ansible, Puppet. "

Thanks, and Best Regards

Karanam Vijaya Kiran

(EA Registration no: R1443178)

HP: +65 92333815

Recruitment Manager

Helius Technologies Pte Ltd (EA Licence No: 11C3373)

Job Description & Requirements

· Assist the project team on day-to-day management, site technical/ engineering matters and authority submissions.

· Prepare method statements, monthly progress claims measurement and reports.

· Ensure that the works are carried out in accordance with the Project Quality & Safety Plan, contract requirements, including drawings and specifications

· Supervise and monitor projects are carried out in accordance to company’s operating procedures, quality standards & contractual specifications.

· Ensuring supervisors & foremen meets clients’ regulatory work requirements.

· Interpret engineering documents and drawings for field personnel

· Ensuring environmental, safety and health practices are always carried out.

· Perform other duties / tasks as assigned by immediate superior or Head of department.

Requirements

· Diploma in Civil & Structural Engineering.

· Proficient in MS Office

· Strong and clear communication skills with proven ability to engage others

· Organised, meticulous with positive work attitude

We are seeking a talented and detail-oriented Release Engineer to develop, maintain, and optimize tools and processes that improve engineering productivity and operational efficiency. The ideal candidate will drive alignment between development and operations teams, enhance automation practices, and deliver high-quality solutions that support continuous integration and deployment pipelines.

Key Responsibilities:

• Develop, maintain, and administer tools to automate operational tasks and improve productivity.
• Create reusable, scalable, and testable automation scripts and tools for routine tasks.
• Drive standardization, automation, and self-service practices in the SDLC/SDLC2 processes.
• Identify and implement industry best practices and pursue continuous improvement opportunities.
• Propose, research, and prototype new technologies, tools, and concepts, integrating them into team practices.
• Develop and implement CI/CD roadmaps for projects.
• Configure and manage Jenkins CI/CD pipelines, enabling smooth production deployments.
• Configure and integrate OSS, Sonar, and Fortify for continuous quality assurance, including automation testing and load testing.
• Collaborate with development and operations teams to enhance automation and cloud adoption.
• Support Agile/Scrum methodologies during project execution.
• Automate continuous delivery and on-demand capacity management solutions.
• Troubleshoot, diagnose, and resolve software and system issues efficiently.
• Develop configuration and infrastructure solutions for internal deployments.
• Build and manage EAPI with unit testing, code coverage, and enhancements.
• Suggest architecture and process improvements.
• Evaluate and recommend new technologies and vendor products.
• Ensure critical system security using best-in-class security solutions.

Qualifications:

• Proven experience in release engineering, DevOps, or related roles.
• Hands-on expertise with CI/CD tools like Jenkins, GitLab, or Azure DevOps.
• Proficiency in automation scripting (Python, Bash, etc.) and infrastructure-as-code (e.g., Terraform, Ansible).
• Solid understanding of Agile methodologies and cloud technologies (AWS, Azure, or GCP).
• Familiarity with static and dynamic code analysis tools (SonarQube, Fortify, etc.).
• Strong problem-solving skills and a proactive approach to troubleshooting.
• Experience with containerization tools (Docker, Kubernetes).
• Knowledge of monitoring and logging solutions (ELK, Prometheus, Grafana).
• Experience with security compliance frameworks and standards.

To apply, simply click the "Apply" button or send your updated profile to [email protected]

EA Licence No.:18S9405 / EA Reg. No.:R1330864

Percept Solutions is expanding and actively seeking talented individuals. We encourage applicants to follow Percept Solutions on LinkedIn at https://www.linkedin.com/company/percept-solutions/to stay informed about new opportunities and events.

Job Description & Requirements

Job Description & Requirements

Roles and Responsibilities

• Site project management.

• Overall project planning, scheduling, monitoring and updating to meet project

completion targets.

• Daily site activities planning, preparing

work breakdown, daily site operations, site

coordination, monitoring and report work

progress.

• Work closely with sub-contractors on

project progress and ensure timely work

arrangements

• Liaise with consultant and carry out site

inspection.

• Attend weekly or monthly meeting with

sub-contractors on work progression and

prepare monthly meeting progress report.

• Preparation of structural analysis, loading

calculation and drawings.

• Establish good relationship with all

relevant parties.

• Ensure site safety & compliance to

authorities’ requirements.

• Perform other construction-related

duties as assigned by Reporting Manager.

Job Requirements:

Degree in Civil or relevant Engineering

Min. 3 years of working experience.

Office software

Experience in Infra-structure project more

than 200million.

• Ensure the BWTS & SCRUBBER systems achieve the required technical standards

and performance.

• Ensure the BWTS & SCRUBBER systems’ certificates and documents are

systematically updated and stored.

• Ability to supervise the installation of ballast water treatment system & Scrubber system.

• Effective implementation of the Company’s planned maintenance system.

• Prepare, arrange, and manage class, statutory, and other vessel surveys.

• Prepare, manage, and monitor dry-dockings and other required repairs and maintenance

jobs.

• Review and train vessels’ crew performance.

• Any other tasks as assigned by the company.

Job Responsibilities:

• Design electrical systems for construction projects, including power distribution, lighting, and safety systems.
• Prepare detailed electrical drawings, specifications, and technical documents.
• Conduct load calculations and electrical system analysis to ensure efficiency and compliance with codes.
• Collaborate with architects and other engineers to integrate electrical systems into overall project designs.
• Review and approve electrical contractor submittals, shop drawings, and material samples.
• Conduct site inspections to monitor the progress of electrical installations and ensure compliance with specifications and standards.
• Troubleshoot and resolve electrical issues that arise during construction and commissioning phases.
• Ensure that all electrical systems are installed safely, efficiently, and in accordance with local codes and standards.
• Prepare progress reports and documentation for project management and stakeholders.

Job Requirements:

• Bachelor’s degree in Electrical Engineering or a related field.
• 3–7 years of experience in electrical engineering, preferably in the construction industry.
• Proven experience with electrical design and installation for large-scale projects.
• Familiarity with project management and coordination with contractors and subcontractors.

A. Main Responsibilities

1 Responsible for all on-site technical and engineering matters.

2 Ensure works carried out meet company’s quality standards & contractual requirements.

3 Involved in project planning, monitoring project progress and schedule.

Including prepare work plan, schedule, preparation all the related work procedure/method statement, job safety analysis, technical clarification.

4 To co-ordinate with the client, consultant, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.

Include attending all progress meeting.

5 Assisting Project Manager in monthly progress claims and monthly progress reports.

6 Ensuring supervisors, foremen, workers and sub-con meets client & regulatory work requirements. 7 Ensuring Environmental, Safety and Health practices are carried out at all times.

8 Other ad-hoc duties assigned from time to time

Job Description

Applicant should be proficient or willing to learn:
- Autocad (and other software to create Technical Drawings)
- Robotic arm programming
- AGV programming
- Programming for PLC of various brands
- Other relevant programming languages

Job Responsibilities

- Prepare and conduct presentations at client site

- Site scheduling

- Able to keep up with managers for ongoing projects

Requirements

Salary will be based on experience and expertise.

To be discussed in person.

Fresh Graduates are welcome to apply.

Job Type: Full-time

Pay: $3,500.00 to 4,000.00 per month

Work Location: In person

Job Descriptions:

• Responsible for on-site construction technical management, ensuring construction quality and progress;

• Participate in the review of construction drawings and technical briefings, ensuring the project is constructed according to the drawings;

• Coordinate the work of various construction teams to ensure smooth operation on the site;

• Timely identify technical issues on the site and propose solutions;

• Responsible for filling in the construction log and reporting on-site issues;

• Assist the project manager with quality inspections and safety supervision during construction.

Job Requirements

• At least one year of relevant work experience;

• Candidates need to communicate in Chinese with the employer and site management staff;

• Strong communication and coordination skills, familiar with construction site management, and capable of solving on-site technical issues.

Follow the Project Management Process from award until handover including all statutory requirements and deliverables

• Develop comprehensive project plan for multiple projects

• Coordinate and be involved in pre-& post tender survey / ordering and pre-con survey on the existing building.

• Provide regular project management reports for management during Work in progress (WIP) review. • Directs and coordinates activities of project team which includes attend site meeting, involve in all internal and external inspection / handover of projects for public use with no critical defects

• Coordinate daily activities and resolve technical problems

• Strong project management skills.

• Good planning, analytical and organizational skills.

• Financial ability.

• Elevator modernization knowledge and experience.

• Great interpersonal skills and customer-oriented behaviour.

• Collaborative approach, strong team-working skills and self-motivated

• Demonstrate leadership ability.

• Desired university / diploma education in Mechanical, Electrical.

• Familiarity of elevator and escalator products knowledge. • Minimum 4 years of project management in lifts & escalator (preferred) or other relevant experience. • Good spoken and written English / Mandarin (Added adavantage)

• Preferably possesses own transport

Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.

Responsibilities

• Responsible for the design, development, maintenance of applications and systems as well as IT production and management of the Bank's technical infrastructures.
• At the forefront of technological innovation, its teams provide technical and functional support for the development activities and projects of the various Corporate and Investment Banking professions in an international environment.
• Develop and implement advanced machine learning and deep learning models to automate and transform business processes in the capital markets value chain
• Use and create data science models to produce strategic insights, develop sophisticated predictive models and deploy solutions meeting current standards.
• Use generative AI models to create synthetic financial data, simulate market scenarios, generate new investment ideas, automate post-trade processes, and enrich seller interactions with relevant stakeholders.
• Collaborate with quantitative analysts and traders to design solutions based on artificial intelligence.
• Develop a product mindset on the exploitation of AI models to improve and build functional blocks in the IS ecosystem
• Work closely with technical and business teams to resolve complex problems.

Qualifications

• Experience required 10 years minimum in an IT functional architecture position
• expertise in machine learning, deep learning, generative AI and MLOps.
• Knowledge of data management practices to clean, preprocess and transform data sets for model training
• Mastery of AI algorithms and frameworks (e.g., Tensorflow, PyTorch, Scikit, etc.)
• Knowledge of GEN AI and LLM technologies on the public Cloud using RAG patterns
• Understanding the ethical principles to better generate embeddings for GenAI.
• Expertise in Python, .NET or Java, DevOps / MLOps / LLMOps (GitLab CI/CD, Kubernetes, AWS Cloud)
• Only Singaporeans

Next Step

• Prepare your updated resume and expected package.
• Simply click on 'Apply here' or email to [email protected] to drop your resume
• All shortlisted candidates will be contacted.

Tamanna Bilandi

EA Licence No. 91C2918

Personnel Registration No. R2096241

Description:

• Perform preventative maintenance, repairs, installations, commissioning, and general servicing activities.
• Effective collaboration with management is vital to ensuring high levels of customer satisfaction through direct engagement.
• Regular communication with customers, the service team, and subcontractors is encouraged to foster positive relationships and enhance the overall customer experience.
• Timely responses to system breakdown and the execution of scheduled preventive maintenance are crucial responsibilities.
• Coordinate and monitor work progress with customers and relevant stakeholders to facilitate prompt installations, as well as supervising subcontractors' activities on-site.
• Ensure that all installations adhere to project specifications is critical. This role entails managing system applications, drafting, database generation, and the commissioning of the systems for which one is responsible.
• Available for 24/7 standby duty is expected to adequately address any complaints or breakdowns.

Job Requirement:

• Bachelor's degree in Engineering or its equivalent with minimum 3 years relevant working experience.
• Excellent communication and interpersonal abilities with a proven capability to work collaboratively with both internal and external partners.
• A proactive self-starter with strong initiative and a collaborative spirit.
• An adaptable individual who can thrive under pressure and handle multiple tasks in a fast-moving environment.

We are looking for a Desktop Support Engineer with expertise in Hardware Support in Desktop Systems, Mobile Devices and IPT. You will be part of the Client Services On-Site Delivery (OSD) team within Core Engineering that provides on-site technical support for internal business users, covering workplace systems, hardware, and multimedia support. The role involves hardware lifecycle management, infrastructure build-out, troubleshooting, and multimedia event support, with occasional data center services, cabling, and patching in regional offices.

Key Responsibilities

• Provide on-site support for workplace hardware and software, including desktop systems, mobile devices, and IPT.
• Handle hardware setup, provisioning, and lifecycle management, including inventory scanning and disposal.
• Offer second-level support for internal users and high-touch support for Platinum users.
• Perform Move, Add, Change (MAC) tasks, power-down execution, and BCP site maintenance.
• Troubleshoot Windows 10/11 systems, desktop builds, and software distribution processes.
• Document and update procedures, ensuring clarity and accessibility.
• Collaborate with engineering teams on workplace-related projects and pilot testing.
• Manage vendor coordination for project and operational needs.

Skills and Qualifications

• Strong knowledge of desktop hardware, telecom, multimedia, and mobile devices (e.g., BlackBerry).
• Expertise in Windows 10/11 troubleshooting and software distribution processes.
• Excellent communication and teamwork skills to engage with end users and offshore teams.
• Ability to prioritize tasks, track multiple assignments, and escalate issues when needed.
• Flexible schedule with the ability to work extended hours or weekends when required.
• Vendor management and coordination experience.

This role is on an initial 6 months contact role.

Job Overview

We are seeking an experienced Automation Engineer with expertise in DeltaV systems to support the commissioning, testing, and optimization of automation processes in a pharmaceutical manufacturing environment. This role focuses on ensuring compliance with GMP standards while driving efficient system performance.

Key Responsibilities

• Configure, maintain, and troubleshoot DeltaV automation systems to support manufacturing operations.
• Ensure reliable performance and minimal downtime of control systems.
• Lead the commissioning and testing of automation systems, ensuring readiness for operational use.
• Develop and execute protocols for FAT, SAT, IQ, OQ, and PQ phases.
• Ensure automation systems comply with GMP, GAMP 5, and FDA regulatory requirements.
• Maintain accurate documentation and support audits as required.
• Identify and implement improvements to enhance system efficiency and reliability.
• Conduct root cause analysis for automation issues and provide corrective actions.

Qualifications

• Education: Bachelor’s degree in Engineering, Automation, or a related field.
• Experience: 5-7 years in automation, with a strong focus on DeltaV systems, commissioning, and validation.
• Skills:Proficient in DeltaV configuration, commissioning, and troubleshooting.
  Hands-on experience with validation processes (FAT, SAT, IQ, OQ, PQ).
  Strong understanding of GMP and regulatory requirements.
  

Responsibilities:

• Set up, deploy, and maintain systems and networks for project requirements.
• Develop technical proposals and deliver solutions within quality standards and deadlines.
• Provide technical guidance, expertise, and support in problem-solving and decision-making.
• Participate in cybersecurity risk assessments, system hardening, and VAPT activities.
• Conduct UAT for systems, storage, switches, routers, and firewalls.
• Perform system and network hardening, VAPT tests, and recommend solutions.

Prerequisites:

• Degree in Information Technology, Computer Science, or a related field.
• Hands-on experience with designing, setting up, hardening, and deploying Windows/Linux OS, storage solutions, and MSSQL servers.
• Proficiency with Huawei/Cisco switches, routers, FortiGate firewalls, NMS, and MFA software.
• Skilled in preparing documentation for system setup, deployment, and hardening per project requirements.
• Strong knowledge of cybersecurity principles, hardening techniques, scripting, and related tools.
• Certifications such as CCNA, CISSP, Security+, or CISA are advantageous.
• Willing to provide support during off-hours for project-related system issues.

Job Description & Requirements

Job duties and responsibilities:

1. Perform certification of release to service

2. Perform and certify aircraft maintenance tasks

3. Inspect, troubleshoot, and repair all associated aircraft systems

4. Signing off tasks and complying with airworthiness requirements

Experience and Qualifications:

1. Minimum at least five years’ experience as an LAE capacity

2. A CAAS license or an Aircraft Maintenance License can be transferable to a CAAS license such as EASA, CASA, DCA, CAD or CAA.

3. Possess at least 2 B1 or B2 aircraft-type rating on A320, A330, A350, A380, B787, B777, B747, and/ or B737.

4. Well-written and spoken English essential.

5. Good computer and interpersonal skills

We are seeking a skilled and motivated Senior Software Engineer to join a dynamic engineering team at an international company.

As a Senior Software Engineer, you will play a critical role in designing and building robust systems while mentoring junior engineers and collaborating with cross-functional teams.

Key Responsibilities:

Design & Development:

• Architect, develop, and deploy high-quality software solutions
• Build scalable, cloud-native applications leveraging platforms like AWS, GCP, or Azure

Code Quality & Best Practices:

• Write clean, maintainable, andwell-documented code.
• Conduct code reviews, ensure adherence to best practices, and guide the team in implementing industry standards.

Collaboration:

• Work closely with the Engineering Manager, product managers, and designers to deliver impactful features.
• Collaborate with cross-functional teams to solve complex technical challenges.

Required Qualifications:

• 6+ years of experience in software development with expertise in GoLang, TypeScript, JavaScript, Python
• Experience in Frontend development would be an advantage
• Proven experience in designing, building, and maintaining scalable systems.
• Strong understanding of cloud platforms (AWS, GCP, or Azure) and microservices architecture.
• Proficiency in modern development tools, version control systems (Git), and CI/CD workflows.
• Excellent problem-solving skills with a focus on delivering high-quality results.
• Familiarity with monitoring, logging, and security best practices in cloud environments.
• Strong communication and teamwork skills with a proactive mindset.

Job Responsibilities:

· To provide technical and maintenance support for the network and security products.

· To work with the team to ensure that clients get the best support they need

· To respond to enquiries professionally

· To able to stage or research before responding to customer

· To flag out complex/difficult cases to team lead and follow through with both external and internal stakeholders

· To document troubleshooting and problem resolution steps

· To be on 24x7 rotating on-call standby for our customers & partners

Requirements:

· ITE or Diploma or Degree in Computer Science/IT Related Fields with a minimum of 1 year Network Security related experience

· Quick and keen to learn new technologies

· Resourceful, creative, independent but able to work well in a team

· Action and customer oriented; Takes initiative and adheres to deadlines

· Taking ownership of technical issues

· Good written and verbal skills; excellent phone manner.

· Firm understanding of TCP/IP, OSI Layer, network security, network routing and switching

· Good troubleshooting skills

· Support Engineers are required to be on 24x7 standby calls on a rotating basis throughout the year

· Relevant network or security certification will be plus point

About the role

Responsibilities

• Complies with all applicable codes, regulations, governmental agency and Company directives related to building operations and work safety.
• Leads operations, assigns work orders, and/or provides technical and procedural training of coworkers and subcontractors. Arranges for subcontractors as needed.
• Consults with clients to schedule preventive maintenance and other downtime to minimize business interruption and inconvenience.
• Formulates and implements a preventive maintenance program to ensure that building machinery and systems meet or exceed their rated life.
• Monitors building systems including fire alarms, HVAC, and plumbing to ensure operation of equipment is within design capabilities and achieves environmental conditions prescribed by client.
• Oversees and inspects the work performed by engineering staff. Determines that work is complete, equipment is fully functional and client space is in prime working condition.
• Responds quickly to emergency situations, summoning additional assistance as needed.
• Assist as needed with routine preventative maintenance functions (filter changes, belt replacements, water treatment, etc.)
• Ability to perform work independently after being given specific instructions.
• Must be able to work effectively with other team members and safety conscious environment.
• Follow company and customer rules and guidelines.
• Respond to customer requests.
• Performs other duties as assigned.

About You

Qualifications & Requirements

College Graduate (Engineering i.e., mechanical, or Electrical or any related courses)

IFM property Management experience for commercial offices (At least 4-5 years)

High IFM and Technical knowledge particularly in equipment’s and engineering (mechanical, electrical and such)

Knowledgeable in equipment’s such as genset, UPS, BMS, FDAS, etc Certification on Safety Training would be an advantage.

Additional certification in three or more of the following: HVAC, electrical, mechanical, HVAC and refrigeration systems, process controls, mechanical power transmissions, painting, plumbing, carpentry, or engine repair.

Certifications/licenses as may be required by local or state jurisdictions.

Why join Cushman & Wakefield?

As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from;

Being part of a growing global company;

Career development and a promote from within culture;

An organisation committed to Diversity and Inclusion

We're committed to providing work-life balance for our people in an inclusive, rewarding environment.

We achieve this by providing a flexible and agile work environment by focusing on technology and autonomy to help our people achieve their career ambitions. We focus on career progression and foster a promotion from within culture, leveraging global opportunities to ensure we retain our top talent. We encourage continuous learning and development

• To co-ordinate and correspond with Clients, Architects, Engineers and Consultants
• To co-ordinate, correspond and supervise sub-contractors, project team.
• Attend site meetings
• Prepare, Plan work schedule and monitor work progress
• Supervision of construction progress and quality checking
• Prepare monthly progresss report and progress claim
• Supervise all structural and civil works
• Liaise with clients' consultants, RE and etc
• Maintain and monitor quality controls
• Ensure workers maintain a clean and orderly construction site at all times
• Prepare job closing inspection reports for completed construction
• Establish inventory control methods and procedures to ensure availability of resources
• Other site administrative duties and adhoc assignments as and when required.