Job Description:

Design and Document Preparation:

• Provide networking expertise, revise solution architecture drawings and diagrams

• Prepare the design documents including Low Level Design (LLD) documents for OPS Network and SMRC Network, firewalls configuration, IDS/IPS and hardening states.

• Prepare ITD (Test procedure) document for OPS Network and SMRC Network

• Prepare new or update all the relevant documents (e.g. Maintenance or User Manual, Config/Rollback/Troubleshoot Procedure) required for the OPS Network (FMC, FTD (firewalls)) and SMRC Network (OFL+ONL)

Integration Support:

• The Contractor with support configuration changes to system platforms in factory and customer sites.

• The Contractor will work on the configurations of interfaces, zones, firewall policies, IPS, application filtering for single firewall (Offline)

• The Contractor will support the integration of Offline HSE and Offline Remote Site Switches with Offline SMRC Servers e.g. PIM/PAM, SNMS/SMS/NMS/LMS, RADIUS, NTP, SIEM etc (Offline)

• The Contractor will support the integration of Online AMTS New HSE & Remote sites switches with Offline SMRC Servers e.g. PIM/PAM, SNMS/SMS/LMS, RADIUS, NTP, SIEM etc. (Offline)

• The Contractor will assist in the SMRC network configuration, Integration, testing, verification and troubleshooting of the following technology used in SMRC Network (Online SMRC)

• The Contractor will work on the configuration, integration, testing, verification and troubleshooting of Online OPS Network selected firewalls / external interfaces (particularly from the Firewall application content inspection (Layer 4 through Layer 7)) (OPS Network)

• The Contractor will configure, optimize and test the transparent firewall failover functionality running in HA and standalone mode with online interfaces for the traffic impact (OPS Network)

• The Contractor will support External Support Platform (ESP) setup, including network platform configuration & Integration (Layer 2 and Layer 3) of switch, configure firewall with S2S VPN, DMZ, NAT and Internet using ACL policies, IPS policies, URL & Content filtering policies, VPN policies, NAT policies, hardening of switch and firewall as per the hardening guideline

• The Contractor to provide troubleshooting support during online deployment & integration (OPS Network)

Hardening Support:

• The Contractor will assist on the hardening of Online / Offline SMRC network equipment and firewalls

• The Contractor will assist on the hardening of Online / offline OPS firewalls (OPS Network).

• The Contractor will troubleshoot / fix if there are any operational / unknown issues occurs in the environment due to the hardening configuration on network devices (Offline, Online SMRC)

• The Contractor will support in case any issue with hardening of online firewalls / any operational issue occurs due to the hardening of online network devices (OPS Network).

JOB SCOPE:-

The scope of work is generally focused on system test engineering tasks to ensure quality products are developed.

1. You will be responsible in system testing activity, accountable for assigned work including system test bed wiring and commissioning, system test execution for product, including controller and I/O platform.
2. You are going to work with System Test leads and others team members closely in executing firmware centric system testing, discover the system related product failures, investigating and characterized the failure and report product defects promptly using assigned tools and template.
3. You are required proficient PLC knowledge to ensure defects are characterized accurately by developer and root cause is clearly understood in verification the resolution provided by developer.

JOB REQUIREMENTS:-

1.Programming experience in ladder programming.
2. Programming experience in scripting languages will be advantageous (preferably Python)
3. Experience/knowledge of industrial automation and PLC application
4. Familiarity with IO’s, controller’s families, and RSLogix5000/500 Application Software will be advantageous

5.Degree in Computer Science, Computer/Electrical/Electronic Engineering or related fields
6.Knowledge and expertise in Test Engineering processes (Agile, continuous integration, waterfall) and methods for test case design and test coverage optimization.
7.Knowledge and expertise in test automation methodologies.
8.Programming experience in ladder programming.
9.Programming experience in scripting languages will be advantageous (preferably Python)
10.Experience/knowledge of industrial automation and PLC application
11.Familiarity in particular with IO’s, controller’s families, and RSLogix5000/500 Application Software will be advantageous
12.Demonstrated a strong technical and problem-solving skills
13.5 years’ experience in test engineering
14.Comfortable with embedded system knowledge
15.Excellent interpersonal and communication skills.
16.Ability to work in teams, action-oriented, and possesses strong drive for results
17.Passionate with testing and curious to explore.
18.Report progress to managers, leads and escalate issues on time to project or management.

Job Responsibilities:

• Pre-plan and prepare construction schedule, and coordinate activities.
• Follow up and report On-site and Off-site project management and progress.
• To prepare and submit progress reports as required by consultants and clients.
• Analyse project specifications, including civil/structural, architectural, and M&E drawings.
• Conduct thorough monitoring of construction work activities and prepare daily, weekly, and monthly site reports.
• Maintain a safe and clean working environment, ensuring adherence to standard rules and regulations.
• Perform other project related administrative duties assigned.
• Coordinate, prepare and arrange site inspection with RE & RTO.
• Arrange daily Toolbox Meeting with Site Supervisor and WSHC and briefing on site activities and daily task. Arrange Site daily activities with Site Supervisor.
• Attend monthly, weekly safety meeting and site works with Client.
• Prepare necessary submission for project. Example, RFI, MS, RA, SWP, shop drawings and supporting documents preparation.
• To prepare and keep records, summary related to project. Maintain Project documents control for ISO purpose.
• Organise the team to attend to emergency defects on Sundays and Public Holidays, and update the status of resolution in the client’s WhatsApp chat group. (Emergency Recovery Work)

Job Requirements:

• Minimum Bachelor's degree in Civil Engineering only.
• Minimum 2 to 4 years of work experience in infrastructural or marine construction industry. However open to fresh graduate to apply.
• Relevant project experiences in dredging, reclamation or near shore construction will be preferred.
• Knowledge of construction methods, materials, and BCA regulations.
• Daily sea travel to island work site is mandatory.
• Working hour from 7am to 7pm from Monday to Saturday.
• Willing to work on Sunday or Public Holidays as per project requirement. (Emergency Recovery Work)
• May require to assist in variable projects.
• Own travel vehicle will be advantageous.
• Strong organizational and communication skills.
• Ability to work well under pressure and in a fast-paced environment.

Responsibilities:

• Perform the installation, configuration, and testing of audiovisual (AV) systems at client locations for both commercial and residential projects.
• Conduct site assessments to evaluate space and project requirements.
• Collaborate with subcontractors and internal teams to ensure smooth project execution.
• Troubleshoot and resolve AV and basic IT network-related issues (e.g., IP conflicts, connectivity problems) on-site.
• Provide technical support during system handovers and client demonstrations.
• Prepare and maintain project documentation, including reports, schematics, and equipment lists.
• Communicate effectively with clients, subcontractors, and team members on-site to address project needs and challenges.

Requirements:

• Entry-level candidates are welcome; basic AV knowledge is a plus.
• Basic computer skills, including familiarity with Microsoft Office (Word, Excel, PowerPoint).
• Strong interpersonal and communication skills, with proficiency in English and Mandarin (Hokkien is a bonus).
• Independent, responsible, and mature working attitude.
• Basic network knowledge (e.g., IP configuration, routers, and switches) is a bonus.
• Must be comfortable with a role that primarily involves off-site work at client locations.
• Ability to work under pressure and meet project deadlines.

Sales Engineer | Up to $3k | Training Provided | 5 Days | Woodlands

Working Day: Monday – Friday (8.30am – 5.30pm)

Working Location: Woodlands

Salary: $2300 - $3,000 + Mobile Claim + Transport Allowance (Cab-charge Card)

Requirements:

• Possessed Diploma in Engineering or any equivalent qualification
• Prefer at least 1 year working experience
• Technically incline with Sales Experience in Semiconductor Industry are preferred
• Willingness to travel oversea as required
• Training Provided

Responsibilities:

• Identify and create sales opportunity to penetrate new accounts for parts sales and main existing products
• Service corporate accounts and manage full sales cycles
• Follow up with customer enquiries
• Build strong and sustainable relationships with customer
• Any other ad hoc duties assigned

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Job Description

• Industry/ Organization Type: Manufacturing/Production
• Position Title: Instrumentation and Control Engineer
• Working Location: Islandwide
• Working Hours: Monday – Friday, 9.00am – 6.00pm
• Salary Package: Up to $4200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Develop solutions for complex technical issues in sectors including life sciences, power, water treatment, chemical, petrochemical, shipyard, and oil and gas.
• Perform calibration of various measuring instruments such as pressure, temperature, flow, radar level, analyzers, and wireless devices; collect and record data accurately.
• Calculate calibration metrics including range, mA, frequency, required output, and accuracy, documenting the results.
• Analyze and compile technical and statistical information to create detailed reports.
• Maintain accurate and up-to-date engineering documentation.
• Any other task as assigned by the Superior.

APPLY NOW!!!

• Diploma or Degree in Electrical, Electronic, or Instrumentation Engineering.
• At least 3 years of relevant experience in a similar field.
• Possess valid Class 3 driver's license.
• Knowledge of Mechanical and Measuring Instruments.
• Excellent reading, writing, and verbal communication skills.
• Skilled in technical report writing and able to interpret schematic diagrams.
• Willing to work at various locations island-wide.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71604 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

• Perform electrical and Instrumentation troubleshooting.
• Implement and execute preventive and breakdown maintenance work for electrical and instrumentation related tasks with focus on safety.
• Responding to breakdowns, diagnosing faults, record and report.
• Implement reliability programs and develop maintenance procedures for instrumentation & electrical equipment to facilitate consistent execution of maintenance tasks.
• Investigate instrument & electrical equipment failures or malfunctions in order to identify root causes of problems as well as recommend and implement solutions.
• Identify and maintain an optimum level of electrical spares and drives to reduce plant downtime, take drive parameters back up and need to maintain.
• Ensure systematic documentation of Maintenance Procedures and Risk Assessments, SLD, E&I related and maintenance records for troubleshooting purpose.
• Update and control of Electrical specification, procedure and drawings.

Requirements:

• Degree in Electrical Engineering or Instrumentation / Maintenance Engineering.
• Min 3 years of working experience in electrical engineering in pharmaceutical industry.
• Candidates from E&I project engineer (with brown field experience) or E&I technician (operating plant) experience will be an added advantage.

Duration : 12 months. Option to extend/convert subject to performance review.

Are you passionate about ensuring the highest quality in software services? We are seeking a Software Quality Engineer (QE) to join our team responsible for developing and maintaining disbursement system . As a QE, you will play a critical role in ensuring that our services are reliable, secure, and meet the needs of our users.

What to Expect:

• Test Planning & Maintenance: Create and maintain test cases and plans, ensuring they reflect the latest requirements and policy changes.
• Automation & Framework Development: Build, maintain, and improve automated testing frameworks and environments to enhance testing efficiency.
• Hands-on Testing: Conduct various forms of testing such as manual, functional, performance, and exploratory tests, and file defects when necessary.
• User Acceptance Testing (UAT): Support UAT activities, ensuring the system functions as expected before release.
• Production Support: Assist in resolving production cases to maintain high-quality operational systems.
• Agile Collaboration: Actively participate in all agile ceremonies, including stand-ups, sprint planning, and retrospectives.

Requirements:

• Educational Background: A degree in software engineering, computer engineering, electrical engineering, or an infocomm-related discipline.
• Testing Experience: At least 3 years of professional software quality testing experience with hands-on automation experience.
• Technical Skills:Strong understanding of testing techniques, test-driven development, and continuous integration/delivery.
  Experience with Java and Spring Boot frameworks is a plus.
  Familiarity with automated testing frameworks (Selenium, Cucumber, JUnit) or enterprise tools (HP UFT, QC, Mobile Center).
  Experience with performance testing tools like JMeter, Gatling, or enterprise tools such as HP LoadRunner.
  Knowledge of penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise-level tools (WebInspect, Nessus, CheckMarx).
  
• Agile Experience: Working experience in Agile environments is highly preferred.
• Soft Skills: Excellent verbal communication and listening skills, coupled with a proactive, self-driven, and motivated attitude.

Why Join Us?

• Be part of a team improving the quality of essential public services in Singapore.
• Work in an Agile environment that values continuous improvement and innovation.
• Enhance your skills in test automation, security, and performance testing using cutting-edge tools

Are you passionate about ensuring the highest quality in software services? We are seeking a Software Quality Engineer (QE) to join our team responsible for developing and maintaining disbursement system . As a QE, you will play a critical role in ensuring that our services are reliable, secure, and meet the needs of our users.

What to Expect:

• Test Planning & Maintenance: Create and maintain test cases and plans, ensuring they reflect the latest requirements and policy changes.
• Automation & Framework Development: Build, maintain, and improve automated testing frameworks and environments to enhance testing efficiency.
• Hands-on Testing: Conduct various forms of testing such as manual, functional, performance, and exploratory tests, and file defects when necessary.
• User Acceptance Testing (UAT): Support UAT activities, ensuring the system functions as expected before release.
• Production Support: Assist in resolving production cases to maintain high-quality operational systems.
• Agile Collaboration: Actively participate in all agile ceremonies, including stand-ups, sprint planning, and retrospectives.

Requirements:

• Educational Background: A degree in software engineering, computer engineering, electrical engineering, or an infocomm-related discipline.
• Testing Experience: At least 3 years of professional software quality testing experience with hands-on automation experience.
• Technical Skills:Strong understanding of testing techniques, test-driven development, and continuous integration/delivery.
  Experience with Java and Spring Boot frameworks is a plus.
  Familiarity with automated testing frameworks (Selenium, Cucumber, JUnit) or enterprise tools (HP UFT, QC, Mobile Center).
  Experience with performance testing tools like JMeter, Gatling, or enterprise tools such as HP LoadRunner.
  Knowledge of penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise-level tools (WebInspect, Nessus, CheckMarx).
• Agile Experience: Working experience in Agile environments is highly preferred.
• Soft Skills: Excellent verbal communication and listening skills, coupled with a proactive, self-driven, and motivated attitude.

Why Join Us?

• Be part of a team improving the quality of essential public services in Singapore.
• Work in an Agile environment that values continuous improvement and innovation.
• Enhance your skills in test automation, security, and performance testing using cutting-edge tools

Job Description:

The suitable candidate will join a team of engineers and operations specialists in the support of DBS’ enterprise privileged access management infrastructure and operations. He/She will be responsible for the end to end design, deployment, operations and development of the bank’s privileged access management framework, infrastructure and processes.

Key responsibilities

• Drive the automation and integration of privileged access management infrastructure to other systems to achieve straight through processing and reduce manual work.
• Provide on-going operations support including management reporting and operations dashboards relating to the governance oversight of privileged accounts and passwords.

Requirements

• 5+ years of CyberArk Experience: Demonstrated expertise in the deployment, configuration, management, and support of CyberArk infrastructure components. Proven ability to provide regional support and integrate CyberArk solutions via APIs. CyberArk certifications are preferred to validate knowledge and skills.
• Scripting and Reporting: Proficient in writing PowerShell scripts and SQL statements to develop comprehensive management reports focused on the usage and operational management of privileged accounts. This includes automating reporting processes and ensuring accurate data presentation for stakeholders.
• Data Visualization: Experienced with Grafana for creating data visualizations and dashboards, enabling real-time insights into access management and security posture. Skilled at translating complex data sets into understandable visual formats for better decision-making.
• Privileged Access Management: Strong understanding of enterprise privileged access management principles, encompassing risk management, compliance, governance, and control. Ability to develop and enforce policies that mitigate risks associated with privileged access.
• Audit Experience: Extensive experience in responding to audit queries and preparing detailed reports related to access management. Skilled in analyzing audit findings and implementing corrective actions to address compliance gaps. Proven ability to collaborate with internal and external auditors to ensure all necessary documentation is accurate and readily available.
• Remediation Expertise: Extensive experience in remediating CyberArk failed objects to ensure that auto-managed objects comply with security policies and standards. This includes troubleshooting and resolving issues to maintain operational integrity and compliance.
• Technical Platform Knowledge: In-depth knowledge of key operating systems and databases, including Windows, Unix, MSSQL, and MariaDB. Previous experience in administering these platforms enhances ability to manage and secure privileged accounts effectively.
• Banking Environment Experience: Familiarity with working in a banking or financial services environment, understanding the unique regulatory and security requirements involved. This background supports effective implementation of access management solutions tailored to industry standards.
• Educational Background: Bachelor’s degree in Computer Science, Information Systems, or Engineering (or a related field). Alternatively, a combination of relevant professional experience and CyberArk certifications is also acceptable, demonstrating a solid foundation in security practices.

The Mechanical Engineer is responsible for the engineering and delivery of mechanical and structural aspects of construction under direction from the Construction Manager. Their activities will involve coordinating design and construction efforts, resolving on site engineering issues and planning and tracking productivity targets.

Key responsibilities and accountabilities

Technical

• Design, integration & coordination, installation & commissioning of mechanical systems and services required for the project
• Liaise with Construction/Installation Manager to ensure job is on schedule on Site.
• Liaise with Client on all technical aspects of the project.
• Provides engineering advice for the Construction/Installation Team.
• Attends meetings with client on all disciplines of the work (i.e. 1 etc.) as required.
• Prepares with the Quality Manager all Inspection and Test Plans and associated Project Specific Procedures.
• Ensures that the quality requirements of the client are adhered to and that company procedures are followed.
• Coordination & integration of the design with other engineering design disciplines & services
• Ensure project timetabling requirements are met
• Development / production of inspection & test and operating & maintenance manual documentation.
• Ensure local regulatory and OHS requirements are maintained
• Ensure that the surveys of installations throughout the project are conducted in a professional manner with all results being reviewed and accepted by UGL. All actions resulting from these surveys are coordinated by the Engineer until completion.
• Provides written reports on engineering activities as required by the Project Manager.
• Mentor Engineering Graduates and Engineering Vacation Students (Engineering Assistant)
• Maintain documentation and registers
• Provide monthly reporting data to the Engineering Manager as required

Safety

• Undertake all responsibilities in a safe manner.
• Ensure a safe working condition is present for all employees, contractors and visitors.
• Participate in daily pre-start meetings.
• Use appropriate personal protective equipment and safety systems such as job safety analysis, pre-work checklists and risk assessments.
• Comply and have input into safe working procedures.
• Report hazards, incidents and accidents within company guidelines.
• Assist with safety sections for reports, tenders and proposals.
• Actively participate in safety training.

Other

• Prepare and implement Workpacks, including ITPs
• Detailed planning and engineering of works
• Procurement of suppliers and subcontractors
• Subcontractor and Supplier Management
• Monitor, control and update program and productivity metrics
• Enthusiastically and co-operatively undertake all site inductions as requested by the client.
• Proactively continuously monitor and evaluation systems and procedures specific to site works to ensure that they are up to date, compliant and up-to-date in line with best practice.
• Actively participate in regular learning and development programs to continually enhance and further develop skills and continuously improve capabilities and performance.
• Portray a professional approach at all times through attitude and appearance.
• Ensure that work space is well managed, tidy, organised and safe.
• Comply with all UGL systems and processes and expected behaviours and standards.

Qualifications and Education Requirements

• Mechanical Engineering Qualification.
• Minimum 5 years’ experience in project related disciplines.
• Significant engineering experience throughout, design, construction and commissioning on Brownfields and Greenfields projects.
• Technical experience includes; rotating equipment, static equipment, GE equipment, materials selection, hydraulic systems, pipelines and piping components
• Strong communication skills (oral & written) including strong negotiation and influencing skills and the ability to establish effective working relationships with a variety of people at different levels both internally and externally.
• Demonstrated ability to work independently to organise and prioritise demands, handle multiple complex tasks simultaneously, set and meet deadlines and follow-through within a fast paced environment with multiple and competing demands
• Proficient skills in computers: MS Word, Excel, Access, Outlook
• Leadership ability

You will play a lead role in managing the Contractors in the construction of new MRT Lines and / or enhancement to Existing Lines. You will be involved in the management of the contractors for Stations and Tunnel constructions in elevated or underground constructions.

You will be responsible for the safety, quality, progress and environment impact of the Contractors’ works. You will also assist in planning and managing the risks and cashflows of the various contracts as well as the issuance of instructions and assessment of variations/payments/claims.

• Knowledge in Civil Engineering with familiarity with the relevant local codes and transit construction

• At least 4 years’ experience in large-scale infrastructure projects

• A good appreciation of the constraints and interface requirements of civil and trackwork.

• Strong project management and leadership skills with proven track records

• Good communication (both oral and written) as well as presentation skills

• Team player who is analytical, resourceful and result-oriented

• Experience in the construction of Civil Defence shelters and underground MRT stations will be an advantage

• Candidates with very good relevant experience may be considered for more senior positions.

• Those without working experience are welcome to apply

Responsibilities:

• Perform scheduled plant inspection according to maintenance regime as well as ensuring that our gas plant, auxiliaries and common systems are maintained according to SOPs, and in compliance with regulations and requirements and in a safe manner.
• Coordination of all Mechanical Maintenance programmes (PM & CM)
• Manage and optimize all planned plant/equipment maintenance activities during minor and major overhauls and inspections.
• sponsible for the functional tests and analyse the failures related to mechanical systems and components and recommends corrective actions to prevent re-occurrence. Troubleshooting of faults/defects issues & carry out failure analysis.
• · Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Execute approved plant improvement works
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Prepare technical specifications for equipment parts and work services. Manage the procurement of parts and services to meet the maintenance needs

Requirements:

• Degree in Mechanical Engineering
• At least 8 years in mechanical maintenance
• Experience in power plant or related process plant experience
• Leadership experience will be a plus

Account Manager:

Kerwin Tan Kai Bin (R1331624)

[email protected]

EA16S8107

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Sales Engineer (Marine Engineering)
• Working Location: Monday – Friday, 9am – 5.30pm (One Saturday per month, 9am – 12pm)
• Working Hours: Tuas West
• Salary Package: Up to $3,800 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Prepare and deliver technical presentations to explain products or services to customers.
• Coordinate with customers and the engineering/operations department to assess service job requirements.
• Collaborate with administrative staff for efficient engineer deployment.
• Secure and renew orders, including managing overseas delivery and logistics.
• Work closely with other sales teams to understand customer needs and provide sales and technical support.
• Perform any other ad-hoc duties as assigned by the department head.

APPLY NOW!!!

• Bachelor's degree in Marine Engineering or a related field.
• Minimum of 1 year of experience in the Marine Industry.
• Strong technical knowledge of marine engines and spare parts.
• Willingness to work hands-on.
• Willingness to travel across various Asian countries for sales promotions and client meetings.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70837 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Chemical Manufacturing
• Position Title: R&D Electrical Engineer
• Working Location: Central
• Working Hours: Monday to Friday (8.45 AM – 5.30 PM)
• Salary Package: Basic Salary up to $3,800 + AWS + Bonus + Transport Allowance + Flexible Benefits
• Duration: Contract (3 years – Renewable)

Key Responsibilities

• Use 3D CAD design tools and perform high-precision 3D printing (FDM & DLP).
• Build simple circuit boards for sensor control and data acquisition using basic microcontroller boards like Arduino, ESP32, or STM32.
• Test and assemble electronic and mechanical parts, and debug software using basic tools like Python or C++.
• Maintain laboratory inventory and handle laboratory administrative tasks (procurement, equipment maintenance/repairs, and safety matters).
• Perform administrative tasks, such as ordering and payment using the SAP system.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• NITEC/Diploma in Electrical Engineering, Mechanical Engineering, Bioengineering, or relevant discipline
• Basic experience in 3D CAD design software, like Solidworks and Fusion360
• Has experience with microcontroller boards like Arduino, Esp32, STM32
• Basic experience in handling simple electronics and basic hands-on soldering skills

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68612 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Requirements:

• Minimally Five (5) years hands-on experience in administration of On-Premise Servers and Cloud Operations (AWS and Azure).
• Working experience with IAM, ECS and EKS in AWS/Azure
• Working experience with Route Tables, NACL, Security Groups, NSG
• With DevOps experience e.g. CI/CD pipeline building and management
• Very good working experience with Terraform using Ship/Hats
• Good working experience with Linux and Windows platform
• Good working experience with Microsoft Hyper-V, VMWare ESXi’s & vCenter, Nutanix, Azure and AWS experience
• Very proficient with Windows Operating Systems 2012/2016/2019/2022 Server
• Very proficient in Active Directory, DHCP, DNS, Group Policy, IIS, SCCM, WSUS, Windows Cluster
• Preferably experience in Commvault/Netbackup Veritas Backup Products
• Preferably experience in TrendMicro/Symantec Anti-virus products
• Exposure with cloud automation tools such as Terraform, Chef etc
• Knowledge with storage products is an advantage
• Able to manage daily support tasks to meet stringent SLA requirements
• Regular 8x5 support (shift rotation but no graveyard), required to be on standby for 7x24 support.
• Expected to work during off-peak hours on system activities
• Basic understanding of Linux OS and willing to be cross trained in Linux/Unix environment
• Basic Networking knowledge is a plus
• Preferably certified in RHEL, Microsoft Certified Systems Engineer (MCSE), Microsoft Certified Systems Administrator (MCSA), ITIL or equivalent.
• AWS SysOps Certified or Azure Administrator Certified is a must

Responsibilities:

• Install and configure software and hardware
• Manage servers and other related technology tools
• Set up accounts and servers
• Monitor performance and maintain systems according to requirements
• Work with users and vendors to take timely and appropriate steps to resolve and troubleshoot issues impacting service levels and conduct root cause analysis
• Ensure security through access controls, backups and hosts firewalls
• Ensure patching is done monthly and systems are upgraded with new releases and models
• Ensure systems always comply with security policies, including vulnerability assessment, patching, and hardening.
• Respond promptly to Incidents and SRs
• Generate and Review Accounts monthly or as per required
• Researching and recommending new approaches to improve the computer system.
• Providing technical support when requested within and after office hours
• Develop expertise to train staff on new technologies
• Build an internal technical documentation, manuals and IT policies

To apply, simply click the "Apply" button or send your updated profile to [email protected]

EA Licence No.:18S9405 / EA Reg. No.:R1330864

Percept Solutions is expanding and actively seeking talented individuals. We encourage applicants to follow Percept Solutions on LinkedIn at https://www.linkedin.com/company/percept-solutions/to stay informed about new opportunities and events.

Job Description:

• Provide presales and post-sales support on the technical queries by customers on the automation product.
• Provide technical support to customers via phone call or in person to provide solutions for them.
• Responding to their needs and make the best recommendation for them.
• Work closely with sales team to ensure they are equipped with up-to-date technical information.
• Provide product training and conduct product demonstration to customers.
• Perform needed evaluation and assessment on customers’ workpieces to ensure it is fulfilled as per their requirements.

Job Requirement:

• Good interpersonal and communication skill
• Welcoming fresh entry level with electrical/electronic or mechatronics background
• Knowledge in PLC, Control/Automation, IOT Knowledge will be added advantage
• Willingness to learn and with positive attitude

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

Sales Engineer

SGD4,000 - SGD 5,000 + Commission

Woodlands

Job Responsibilities

• Develop close working relationship with customers championing products.
• Identify niche market segments locally, create market awareness, new product positioning and launch, develop and implement effective marketing programs with the timely support to penetrate, expand and accelerate business growth.
• Understand market trends, competitions, local market culture/customer expectations in order to achieve the organizations’ goals.
• Liaise with management and on various matters – develop jointly common marketing goals/strategies, share marketing information, obtain courses information

Ho Ming Jie (Edmund) Reg No: R1987094

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Working Hours: Weekdays, 8am to 430pm
• Working Location: Jurong Island (Transport from Jurong East MRT)
• Basic Salary: $4000 - $5000

Ensure safety compliance, risk assessment, and process improvement in daily operations and construction projects, while adhering to health, safety, and environmental (HSE) regulations in the chemical industry.

Key Responsibilities

• Act as the HSE leader in daily operations and construction projects, ensuring adherence to safety standards.
• Lead risk assessments, HAZOP studies, and the review of operating procedures for modifications and site activities.
• Identify high-risk activities based on HAZOP studies, collaborate with production managers to develop and implement safety improvement plans.
• Work closely with production and logistics teams to enforce safe work procedures and compliance with HSE protocols.
• Review safety observations, prioritize improvements based on risk levels, and ensure follow-ups via the Management of Change (MOC) process.
• Collaborate with project engineers, production teams, and maintenance coordinators to ensure timely execution of safety-related projects.
• Regularly review and update emergency and disaster prevention procedures to align with current operations.
• Lead and drive HSE-related improvement projects and initiatives.
• Perform additional tasks as assigned by superiors.

Our Requirements

• Relevant experience in the chemical industry.
• In-depth knowledge of safety legislation and regulations in the chemical sector.
• Diploma or Degree in Engineering, Health, Safety, or Environmental disciplines.
• Proficiency in Microsoft Office applications.
• Strong written and verbal communication skills.
• Excellent organizational and analytical skills with critical thinking abilities.

We regret that only shortlisted candidates will be notified.

Interested applicants kindly click on “apply now” or send your updated resume to [email protected]

Jayden Kua Jing Yu

Registration Number: R24124814

EA License Number: 02C4944

People Profilers Pte Ltd, 20 Cecil St, #08-09, PLUS Building, Singapore 049705

http://www.peopleprofilers.com

We are hiring top-tier data analyst/data engineers at the different level , 2yrs+ for our trading clients.

What you could expect:

• Dynamic regional team;
• Competitive compensation
• Growth potentials

Job Responsibilities:

• Manage the end-to-end data flow and used for trading flow.

Job Requirements:

• 2+ years of experience in a similar roles.
• Degree from a top-tier univerisities.
• Bacic programming skills in in Python and SQL.
• Strong English communication skills.

License No.22S1076 | EA Reg.: R2197956

Permanent, 5days, Paya Lebar

Our client

MNC in air conditioning and humidification system solution serving high tech industry.

Responsibilities:

· To Conduct assessments of hvac designs to ensure that they meet the required specifications and standards within allotted timeline.

· To verify and prove that hvac systems in data centre build and function according to the requirement.

· To execute, lead n manages the commissioning process across all projects, from start-up, designing, construction, acceptance, functional performance and systems testing to operational turnover.

· Management of 3rd party commissioning agents, supplier, contractor, client to resolve any issues on site

· To perform project closeout and handover

· To produce Commissioning Report for each project.

Requirements:

· Diploma in Mechanical Engineer or related disciplines.

· 3 years’ experience in hvac data centre of commissioning management or hvac data centre design management

· Proficient in data centre safety and industry standards

· 3 years’ experience in physical M&E equipment in data centre (especially hvac0

· Speaks and write 2 languages.

Please email your resume ( in word document )to [email protected].

We regret only shortlisted candidate will be notified.

Job Description

• Review project specifications and technical clarifications
• Prepare method statements and check drawing discrepancies
• Carry out project planning, design, material requisition, cost control, project supervision and documentation
• Supervise the M&E works and coordinate with client’s representatives, consultants and sub-contractors on technical matters
• Coordinate with other trades to ensure smooth work progress
• Ensure all M&E works are compliance with all necessary standards, code of practice and safety regulations
• Attend all the meeting as and when required
• Temporary M&E works (eg: site office, trial holes, temp power supply etc)
• Any other duties assigned by the Management

Job Requirement

• Diploma/Degree in Mechanical or Electrical Engineering or equivalent
• Min 5 years experience in Construction Industry
• Good communication skills and ability to work independently
• AutoCAD & Revit Certificate

Responsibilities :-

- To supervise & ensure works are in accordance to the contract drawings & specifications

- To inspect & ensure that the ACMV installation works are executed within acceptable standard of workmanship

- To monitor the installation progress as well as coordination with Client, Consultants & vendors to ensure efficient & timely delivery of assignment

- Prepare & submit site progress reports & other necessary project documentation

- Assist in the preparation of progress payment claims & variation orders where required

- Responsible for testing & commissioning of ACMV systems

- Attend safety, technical & daily site progress meetings

- Conduct site inspection with relevant parties to resolve technical/site issues

- Ensure timely handover of project

- Other project-related tasks as deemed necessary

Requirements :-

- Diploma/Degree in Mechanical Engineering or equivalent

- Min.2 years of working experience in construction industry

- Having experience in Wafer fab or pharmaceutical will be an added advantage

- In-depth knowledge of project management principles

- Able to work independently with minimal supervision

- Able to converse in both English & preferably Mandarin as required to liaise with Mandarin speaking site workers, subcons/vendors

- Singaporean or Singapore PR preferred

Job Description

• Industry/Organization Type: Manufacturing/Electronic Components and Boards
• Position Title: R&D Engineer
• Working Location: Bedok
• Working Hours: Monday – Friday, 8.15 AM – 6.15 PM
• Salary Package: Basic Salary up to $4,000 + Transport Allowance + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Researching electronic components and designing new products to meet market needs.
• Supporting the complete R&D project life cycle and participating in all phases from concept to manufacturing through designing, prototyping, validation, and production of R&D products, taking into account the functionality, feasibility, quality, manufacturability, costs, and completion time.
• Giving concise and informative demos/presentations to other team members or product managers about design concepts.
• Finalizing a design and its deliverables to facilitate a smooth transition to the relevant stakeholders.
• Preparing product documentation like the bill of material, material specification, and process documentation.
• Evaluating processes and design improvements.
• Coordinating with the Global R&D team.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Bachelor’s Degree in Engineering or Technology (Electrical/Electronics) or equivalent
• Has a minimum of 2 years of experience with passive electronic components design
• Has understanding and work knowledge of AutoCAD Electrical
• A good understanding of product safety, environmental testing, and electromagnetic compatibility (EMC) will be advantageous

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69868 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781