Information:

1. Mon to Fri: 8am to 5.45pm
2. Salary range $3200 to $4500

Responsibilities:

• Assist the Project Manager in developing and managing project schedules, budgets and resources.
• Coordinate with architects and contractors to ensure project success.
• Review project plans, specifications, and contracts.
• Ensure compliance with building codes, safety regulations, and environmental requirements.
• Monitor project progress, make adjustment and report status to Project Manager
• Manage project risks and identify opportunities for improvement
• Provide technical support to project team members
• Ensure quality control and quality assurance for all project deliverables
• Attend project meetings and facilitate communication among team members.

Requirements:

• Diploma/Degree in Electrical/Mechatronic Engineering
• At least 1 - 3 years of experience in handling similar projects

Interested applicants, send in your updated resume by clicking “Apply Now”

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105

The Opportunity:

• MUST HAVE EPC DESIGN EXPERIENCE in Cleanrooms/Industrial Projects
• Permanent Roles x2
• Work hours: Mon to Fri
• $5,000 - $8,000 + AWS + VB

Adecco is partnering with a Global EPC Leader to look for Senior Process Engineer (Design experience in Cleanrooms/Industrial Projects)

The Job:

• Oversee the work of Process Engineers and Process Supervisors, ensuring accuracy and quality.
• Define deliverables for system design and collaborate with clients to understand scope requirements.
• Create or review design documents such as Process Flow Diagrams, Piping and Instrumentation Drawings, System Layouts, and Equipment and Instrumentation data sheets according to the Deliverable List.
• Participate in tendering activities including preparation, attending clarification meetings, evaluating proposal submissions, and preparing Tender Recommendation Reports.
• Conduct engineering reviews of vendor documentation to ensure technical scope compliance and completeness.

The Talents:

• Diploma/Degree in Chemical/Environmental Engineering or any technical discipline
• 4 - 7 years of EPC Design Experience, in Cleanrooms/Industrial Projects (Water, Gas, Chemical Systems)

Next Step:

• Interested applicants, please send your resume to [email protected] with your current and expected salary.
• All shortlisted candidates will be contacted.

The Opportunity:

• MUST HAVE EPC DESIGN EXPERIENCE in Cleanroom/Industrial Projects
• Permanent Role x2
• Consultancy experience is welcome to apply
• Work hours: Mon to Fri
• $5,000 - $8,000 + AWS + VB

Adecco is partnering with a Global EPC Leader to look for Senior Electrical Engineer (Design in cleanroom/industrial projects)

The Job:

• Prepare electrical tender packages, including specifications and drawings, ensuring alignment with the Design Checklist.
• Progress all design elements in accordance with the established Design Checklist.
• Undertake tendering and estimating of electrical works for projects before they are awarded.
• Compile and review the Operation and Maintenance Dossier for projects.
• Stay updated on industry practices and engineering trends to maintain technical competence.

The Talents:

• Diploma/Degree in Electrical Engineering
• 4 - 8 years of EPC Design Experience, in cleanroom/industrial
• Consultancy experience is welcome to apply

Next Step:

• Interested applicants, please send your resume to [email protected] with your current and expected salary.
• All shortlisted candidates will be contacted.

The Opportunity:

• Permanent Role
• Office location: Central
• Work hours: Mon to Fri / Hybrid Arrangement
• $4000 - $6000 Basic, $1150 Transport, PB+ AWS
• O&G industrial instrumentation experience

Adecco is partnering with a Global Leader in O&G Industrial Instrumentation with more than 100 years regional prescnece.

The Job:

• Build new accounts and maintain key accounts to meet sales targets.
• Conduct products demonstrations and technical presentations.
• Work closely with internal and external stakeholders to achieve overall efficacy.
• Minimal regional travelling to provide training and exhibitions.

The Talent:

• 2-3 years of sales experience in O&G industrial instrumentation
• Knowledge of visual inspection, NDT, detectors, analyzers related products that can apply in O&G

Next Step:

• Interested applicants, please send your resume to [email protected] with your current and expected salary.
• All shortlisted candidates will be contacted.

• To analyse user requirements and design, develop, implement and maintain computer applications to support and assist users to meet their business objectives more effectively and efficiently.
• Develop, support and enhance the Data Download Centre (including Engineering Portal) and iSCM websites.
• Develop, support and enhance Excel productivity enhancement tools (VBA macros).
• Support end-users in usage of Plasma and ACCPAC and help to resolve any operational issues, including working together with vendor (Databit) if necessary.
• Develop and enhance data extraction and transformation mechanisms on source systems (e.g. Plasma, YEOS, NYQT, Oracle BI, SAP RFC, PTS etc.) and store the results into Plasma Info Server Monitor the space consumption of Plasma Info so that Server database so that potential problems (e.g. disproportionate consumption of disk space by a particular table, depletion of data tablespace, excessive consumption of temp tablespace) are detected and resolved early to avoid unscheduled database downtime.
• Perform ad-hoc retrieval of order/production/sales data to support incident investigation, reporting or other requests.
• Support Migration Activities of Existing Plasma Info Server to SAP.
• Support & ensure successful implementation of Company-wide Automation (ERP) Projects.

Requirements:

• Degree in Info Systems/Computer Science or its equivalent
• Prefer 2-3 years relevant experience in Manufacturing Industry.
• Entry level are welcome to appy as training will be provided.

Knowledge:

SQL; Oracle PL/SQL; MS SQL Server Transact-SQL

Object-oriented analysis and design

ASP.NET 4.5.1; C/C++/C#; XML

JavaScript; JQuery; CSS; HTML

Excel VBA; VBScript; PowerShell

PHP, VS.Net, MSOffice

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

Job Title: Site Engineer
Number of Vacancies: 3
Salary Range: SGD 2500-3500 /month

Job Requirements:
• Experience: At least one year of relevant work experience;
• Language Skills: Candidates need to communicate in Chinese with the employer and site management staff;
• Other Requirements: Strong communication and coordination skills, familiar with construction site management, and capable of solving on-site technical issues.

Job Responsibilities:
• Responsible for on-site construction technical management, ensuring construction quality and progress;
• Participate in the review of construction drawings and technical briefings, ensuring the project is constructed according to the drawings;
• Coordinate the work of various construction teams to ensure smooth operation on the site;
• Timely identify technical issues on the site and propose solutions;
• Responsible for filling in the construction log and reporting on-site issues;
• Assist the project manager with quality inspections and safety supervision during construction.

Work Location: Construction Site

Benefits:
• Medical Insurance
• Paid Annual Leave
• Year-end Bonus

Application Method:
Interested candidates, please send your resume to [email protected] and indicate the position you are applying for.

职位名称: 现场工程师
招聘人数: 3名
薪资范围: 2500-3500元/月

职位要求：
• 经验要求： 至少一年相关工作经验；
• 语言能力： 需要求职者使用中文和老板、工地管理人员进行沟通；

• 学历要求： 要求是土木工程相关专业；
• 其他要求：

• 具备较强的沟通能力和协调能力，熟悉施工现场管理工作，能够解决现场技术问题。
• 能够接受合理的加班需求，适应现场的工作环境

岗位职责：
• 负责现场施工技术管理，确保施工质量和进度；
• 参与施工图纸的审核和技术交底，确保工程按图施工；
• 协调各施工班组的工作，确保施工现场的顺利进行；
• 及时发现施工中存在的技术问题并提出解决方案；
• 负责现场施工日志的填写和现场问题的汇报；
• 配合项目经理进行现场施工的质量检查和安全监督。

工作地点： 施工现场

福利待遇：
• 医疗保险
• 带薪年假
• 年终奖金

申请方式：
有意者请将简历发送至 [email protected]，并注明申请职位。

Location: Jurong East

Working hours : Mon – Fri, 8.30am – 5.30pm

Job Responsibilities:

• Supervise, execute and coordinate project activities together with a group of Engineers and Technicians
• Monitor and control project on schedule, within budgeted cost and quality standards.
• Work closely with consultant/ project owner to ensure project is delivered according to requirements.
• Perform system programming and troubleshooting during project implementation.

Requirements:

• Diploma/Higher Nitec in Electrical and/or Electronics
• 1-2 years’ experience in site supervision and coordination with main contractors and subcontractors
• Must have hands-on experience in alarm, card access and CCTV system installation knowledge.

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Job Info:

• Working Days: Monday - Friday
• Working Hours: 8:30am - 5:30pm
• Location: North-East

Job Description:

• Design and develop high-precision semiconductor equipment to meet the processing and automation needs of customers.
• Understand the design specification given to you by the design lead.
• Understand the company’s design standards and best practices.
• Understand the constraints within which your design must work.
• Understand geometric tolerances and dimensional analyses.
• Choose components based on an understanding of function, reliability, and costs.
• Choose materials based on an understanding of materials science and engineering.
• Understand design for manufacturability/assembly.
• Work with the Electrical Engineer to choose drives and electrical components (if any).
• Discuss with the Software Engineer on any interlocking logic requirements.
• Lay the design concept down in the 3D CAD.
• Perform DFMEA during the design process.
• Submit the CAD module to the system integrator to check for interface issues.
• Review the design with the design lead.
• Put the part designs down on drawings, carefully specifying tolerances and specifications.
• Build the module BOM.
• Procure the module components.
• Review the assembly of the physical module.
• Perform design improvements where appropriate.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Loh Kar Leong | EA Personnel No.: R23116015

Job Responsibilities:

• for research and development on the algorithm for Large Vision-Language Generation Models in the multimedia field, make breakthroughs in key algorithm technologies, such as controllable image generation, fine-grained generation content control, text-to-image generation, text-to-video generation, image editing, object addition & removal & alteration in images, etc.
• explore the latest technologies in large vision-language model, deeply understand the technological development trends in the multimedia field such as multimodal large model generation and editing, as well as industries like mobile phone / autonomous driving, to incubate new products and features.
• with relevant product teams to ensure the smooth delivery of related products.

Job Requirements:

• degree or above in Computer Science, Artificial Intelligence, or related engineering fields (Ph.D. preferred).
• background in large vision-language model, AIGC, image processing, and machine learning technologies, with 1-5 years of relevant industry experience. Priority will be given to those who have published papers in relevant academic conferences and journals as the first author, such as CVPR, ICCV, ECCV, NeurIPS, AAAI, ACMMM, ACL, ICLR, ACL, etc.
• algorithm and deep learning model development skills, proficient in Python/C++ and relevant AI development frameworks such as TensorFlow/PyTorch.
• in image/video processing algorithms or the development of image processing chips.
• vision, able to stay informed about the current status and trends in academia and industry.
• independent thinking ability and teamwork spirit.

Interested candidate who wish to apply for this position, please click on APPLY NOW

EA License No.: 01C4394 | PERSOLKELLY Singapore Pte Ltd

EA Registration No.: R23117518 | Heah Sian Wei

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services, complying with Government’s COVID-19 health advisories and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Product Engineer (Automation/Electromechanical Equipment)
• Working Location: East Area (Nearest MRT: Bendemeer)
• Working Hours: 5 days Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Set up and troubleshoot semiconductor equipment.
• Document engineering enhancements for continuous improvement and future reference.
• Develop procedures for the assembly, inspection, and testing of equipment.
• Collaborate with the engineering and software teams to enhance system designs.
• Work alongside cross-functional engineering teams to troubleshoot and resolve system issues.

APPLY NOW!!!

• Min. Diploma in Mechanical or Mechatronics Engineering.
• At least 2 years of experience in setting up and managing automation equipment.
• Possesses a thorough understanding of electromechanical systems.
• Willingness to travel internationally for field support as needed.
• Availability to work overtime when required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69727 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Product Engineer (Vision Inspection Systems)
• Working Location: East Area (Nearest MRT: Bendemeer)
• Working Hours: 5 days Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assist in component selection, engineering evaluations, and testing of parts and sub-modules for vision inspection equipment.
• Design electrical parts and sub-modules for vision inspection systems.
• Maintain product design documents, including drawings and BOM (Bill of Materials).
• Work closely with and manage suppliers to ensure all design requirements are met.
• Provide troubleshooting expertise for design and system issues.
• Plan and coordinate the release of new designs to manufacturing.

APPLY NOW!!!

• Min. Diploma in Electrical or Electronic Engineering.
• Familiarity with CAD software for electrical layout and schematic design.
• Experience working with PC hardware, Windows OS, and relevant software.
• Knowledge of PCB/PCBA design, fabrication, and testing processes is a plus.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69795 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

• Growth Opportunities
• MNC
• 5 days work week

RESPONSIBILITIES:

· Plan and forecast project monthly and weekly installation schedules.
· Anticipate potential site issues and eliminate any risks.
· Liaise with site person-in-charge for work arrangement and manpower planning.
· Liaise with suppliers for delivery of materials and equipment by raising MERF (material- equipmentrequisition-form) for approval.
· Attend regular project meetings (such as site progress and co-ordination) with interested parties
including clients, architect, consultants, main contractor, and sub-contractors.
· Monitor, co-ordinate and direct the execution of work with site representatives and workers for
smooth workflow.
· Submit method statement, risk assessment and shop drawing.
· Submit progress report and progress claim.
· Ensure design of Mechanical & Electrical work meets with clients’ requirements.
· Perform pre-inspection of deliverable material and equipment, and after delivery inspection for any
defective goods.
· Inspect site installation work for quality and assurance.
· Conduct joint site inspection with client’s representatives.
· Conduct pre-testing and commissioning activities.
· Clearance of defects and outstanding works.
· Prepare as-built drawings for joint inspection with clients’ representatives.
· Prepare Operation & Maintenance manuals for client’s acceptance.
· Assist in the settlement of project final account including variation orders.

Simply submit your application with your updated Resume in MS Word Format to Shubhi Dugar (EA Personnel Reg. No.: R21100680) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Shubhi, at 6590 9968 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary

• Reason(s) for leaving

• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Core Network Engineer | $ 7000 | Singaporean Only

Network Admins who Shall administer the network equipment, either on-site or remotely, which shall minimally include the following:

• Checking the logs of the network equipment and network links every morning to ensure no abnormal activities;
• Install, maintain and upgrade all hardware, firmware and software used;
• Apply software and security patches as prescribed in Part 2C Patch Management Requirements;
• Fine-tune the network or system parameters;
• Patch/Re-Patch cables in patch panels, network points and all network equipment;
• Labelling of cables, patch panels, racks and equipment;
• Create, delete or modify access rights for the network equipment related user accounts in terms of authentication, authorisation and accounting;
• Connect Customer-approved network equipment to the Customer’s network;
• Manage IP addresses and IP assignment scheme;
• Manage firewall rules setting and security configuration e.g. add, delete or modify firewall rules, change encryption keys;
• Perform troubleshooting to resolve network issues;
• Manage incidents as specified in Part 2D Service Management Requirements;
• Document and maintain configurations of all network hardware, cabling information and software used in the operating environment;
• Perform routine backup of network configuration for network equipment including firewall rules;
• Perform NAC ClearPass administration for security posture check enforcement which minimally

shall additionally have One of the following:

• Cisco Certified Network Professional (CCNP and above);
• Alcatel network certification or equivalent; or
• Administrative certification of firewall (e.g. Juniper, Cisco, Sidewinder).

Interested candidates, please send your CVs on [email protected]

Regret to inform that only shortlisted candidates will be notified.

CEI: R1988671

EA License: 14C7275

Bayes is representing a European Facade-Major on key hires as they scale-up their business across South-East Asia. We are presently seeking Project/Site Engineers as part of their hiring plans.

• Work with Project Manager to manage project-related tasks (Facade Installation) to achieve the project objectives on time and within the cost target by strictly enforcing quality, safety, and customer satisfaction throughout the entire duration of the project.
• Ensure performance targets are achieved.
• Provide regular site progress update status to project manager.
• Conduct weekly site progress meeting with subcontractors, monitor and supervise to ensure the subcontractors comply to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Drawing team

Requirements:

• Minimum 2-4 years of relevant experience - comfortable to work on 5.5 days workweek
• Experienced in Construction/M&E industry/Building Materials
• Basic knowledge of Microsoft Office software like Word, Excel, Outlook
• Local construction knowledge

Bayes provides career opportunities with reputable and progressive Employers and prioritizes the interests of all whom we represent. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

All personal data supplied will be treated in confidence, and as permitted by law. For further enquiries, please visit our website which shares our Privacy and Data Protection Policy.

Dickson KOH | Managing Partner
Head, Infrastructures Practice
EA Registration R1103367

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Product Engineer (Vision Inspection Systems)
• Working Location: East Area (Nearest MRT: Bendemeer)
• Working Hours: 5 days Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assist in component selection, engineering evaluations, and testing of parts and sub-modules for vision inspection equipment.
• Design electrical parts and sub-modules for vision inspection systems.
• Maintain product design documents, including drawings and BOM (Bill of Materials).
• Work closely with and manage suppliers to ensure all design requirements are met.
• Provide troubleshooting expertise for design and system issues.
• Plan and coordinate the release of new designs to manufacturing.

APPLY NOW!!!

• Min. Diploma in Electrical or Electronic Engineering.
• Familiarity with CAD software for electrical layout and schematic design.
• Experience working with PC hardware, Windows OS, and relevant software.
• Knowledge of PCB/PCBA design, fabrication, and testing processes is a plus.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69795 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

• Position :Project Engineer- MARINE OFFSHORE
• Location: Near Jurong East MRT
• Working hours: 5 days (Monday- Friday 9.00am-6.00pm)
• Salary (commensurate with experience): Up to $3500 + Bonus
• Duration: Permanent
• Industry: Marine and Offshore Engineering

Main Responsibilities

• To prepare Dynamic Positioning System Trial Report
• To prepare Dynamic Positioning Failure Modes and Effects Analysis (FMEA)
• To attend sea trials onboard vessels
• To liaise with clients on matters related to technical matters
• To prepare technical reports / drawings

Requirement:

• Proficient in AutoCAD
• Degree in Electrical or Electronic Engineering
• Possess good conversational and written English
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only.
• Relevant experience will be an advantage, candidate with no experiences welcome to apply as trainings will be provided

Email to [email protected]

Do visit Search Personnel Pte Ltd for more job listings.

***We DO NOT charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Engineer,Quotation to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Provide technical expertise during tendering and quotation processes/activities and support the sales and marketing team with relevant engineering insights.
• Handle tendering processes and engage with clients from oil companies through various communication channels.
• Review and comprehend technical requirements outlined in customer tender documents.
• Coordinate with internal teams to collect essential data for proposal development.
• Draft and compile technical documentation, such as datasheets, proposal designs, and tender technical answer sheet.
• Prepare cost breakdowns and delivery schedules to assist the sales and proposals team in responding to inquiries.
• All other ad-hoc duties as assigned.

Requirements

• Min Degree in Relevant Qualification in Engineering or equivalent.
• Min 5 years relevant working experience in tendering and quotation process.
• Proficient in Microsoft Office, SharePoint, and CAD software.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Responsibilities:

• Plan, execute, and monitor technical aspects of projects.
• Manage or support system/network setup and upgrades.
• Ensure operational systems meet Service Level Agreements.
• Perform routine maintenance and operational tasks. Provide project documentation and reports.
• Diagnose and resolve technical issues.

Requirements:

• Experience with Windows Server OS, Unix/Linux OS, and VM environments.
• Knowledge of Microsoft SQL Server is a plus.
• Familiarity with VPN, firewall appliances, and Cisco routers/switches.
• Strong communication skills for technical and non-technical audiences.Proactive, dynamic, and analytical

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Job Description

• Industry/ Organization Type: Material Handling Equipment Supplier
• Position Title: Control System Engineer (Electrical Control Panels)
• Working Location: East – Ubi (Walking distance from MRT to the company)
• Working Hours: 5 days (Mon-Fri: 8.30am-6pm)
• Salary Package: Up to SGD 4500 + AWS
• Duration: Permanent

Key Responsibilities

• Managing integration engineering tasks.
• Developing and implementing electrical circuits from the initial concept, through design, to programming.
• Programming PLCs, with proficiency in brands like Siemens, AB, Omron, Mitsubishi
• Installing, starting up, testing, and commissioning electrical control panels both in-house and on-site.
• Calculating complete costs for control panels necessary for projects.
• Conducting operational and maintenance training for customers and colleagues.
• Creating Operational and Maintenance manuals for completed projects.
• Diagnosing and repairing issues with delivery systems.
• Working independently both in-house and on-site.
• Coordinating with owners, subcontractors, and vendors.
• Meeting customer expectations according to engineering standards.
• Ensuring reports are submitted accurately and on time.

APPLY NOW!!!

• Min. Diploma in Electrical, Mechatronics, Automation, or Instrumentation Control System Engineering
• Min. 2 years of experience in the design and troubleshooting of Electrical Control Panels and PLC Programming
• Experience with material handling equipment or weighing systems is highly advantageous
• Hands-on experience in servicing and troubleshooting such systems is preferred
• Ability to read and understand schematic, electrical, and mechanical diagrams
• Must know Auto-CAD
• Willing to travel on short notice if required based on the project

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71642 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Responsibilities:

• Setup and troubleshooting of semiconductor equipment.
• Create procedures for assembly, inspection and testing of equipment.
• Collaborating with the engineering team and software team to optimise system design.
• Document engineering improvements for future reference.
• Work with cross-functional engineers to resolve system issues.

Requirements:

• Degree/Diploma in Mechanical or Mechatronics Engineering or Diploma with 3-4 years of experience in setting up high-precision/automation equipment.
• Process good knowledge of electro-mechatronic systems.
• Experience in Semiconductor Assembly and Test environment, especially with AOI/Vision Inspection machines.
• Good problem-solving and analytical skills.
• Able to travel overseas for field support when required.

To apply, please click "Apply Now" or visit www.gmprecruit.com and search for job reference: 21622

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

Job Description & Requirements

•To plan and execute corrective/preventive maintenance on facility equipment and production equipment to ensure good efficiency and availability.

•Implement TPM program in HPSL such as autonomous maintenance and critical spare part management.

• Engage external equipment vendor for service contract and ad hoc diagnostic or corrective maintenance activities.

• Support safety and EHS related activities and audits.

Duties:

1. Plan and execute corrective/preventive maintenance on facility equipment and plant equipment to ensure good efficiency and availability. Generate equipment and facilities related records/reports/ documentations on above activities.

2. Implement TPM strategy. Responsible for tracking machinery spare parts usage, maintaining adequate quantity, critical parts requirement, spare parts management, continuous improvement, and ISO audits.

3. Support EHSS related topics, ensure site is in full compliance with Environment, Health and Safety (EHS) and Security regulation and policy.

4. Resolve various equipment performance issues internally before approaching equipment vendor. Review equipment log and technician feedback for quick solutions.

5. Liaise and co-ordinate jobs to be performed by contractors for facilities and plant equipment. Ensure work completion and achieve high standard of work.

6. Perform site EHSS inspection/audits and ensure that all corrective / preventive actions are close in timely manner. Responsible for internal/external audits and EHSS activities.

7. Interpret electrical diagrams and mechanical drawings for equipment troubleshooting with at least 3 years hand-on experience

8. Evaluate existing/new contractors’ performance and negotiate with them on quotations and service level.

Knowledge:

• Hands on experience in mixer and milling equipment maintenance is an advantage.

• Knowledge in TMP, Equipment FMEA is an advantage.

• Knowledge in facilities maintenance (Electrical, water, AC) is an advantage.

• EHS competence, familiar with ISO45001 & ISO14000 is a plus.

• Diploma / Degree in Mechanical or related discipline

Skills:

• Able to read electrical, hydraulic, pneumatic and mechanical diagrams and carried out maintenance work accordingly.

• Lead and guide technicians on above work.

Abilities:

• Operational hands-on experience

• Work under pressure and multi-tasking.

• A good team player and have good interpersonal skills

Jessie Hoe Huey Miin

CEI Reg No: R1103861

EA: 99C4599

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)