Job Description:

Design and Document Preparation:

• Provide networking expertise, revise solution architecture drawings and diagrams

• Prepare the design documents including Low Level Design (LLD) documents for OPS Network and SMRC Network, firewalls configuration, IDS/IPS and hardening states.

• Prepare ITD (Test procedure) document for OPS Network and SMRC Network

• Prepare new or update all the relevant documents (e.g. Maintenance or User Manual, Config/Rollback/Troubleshoot Procedure) required for the OPS Network (FMC, FTD (firewalls)) and SMRC Network (OFL+ONL)

Integration Support:

• The Contractor with support configuration changes to system platforms in factory and customer sites.

• The Contractor will work on the configurations of interfaces, zones, firewall policies, IPS, application filtering for single firewall (Offline)

• The Contractor will support the integration of Offline HSE and Offline Remote Site Switches with Offline SMRC Servers e.g. PIM/PAM, SNMS/SMS/NMS/LMS, RADIUS, NTP, SIEM etc (Offline)

• The Contractor will support the integration of Online AMTS New HSE & Remote sites switches with Offline SMRC Servers e.g. PIM/PAM, SNMS/SMS/LMS, RADIUS, NTP, SIEM etc. (Offline)

• The Contractor will assist in the SMRC network configuration, Integration, testing, verification and troubleshooting of the following technology used in SMRC Network (Online SMRC)

• The Contractor will work on the configuration, integration, testing, verification and troubleshooting of Online OPS Network selected firewalls / external interfaces (particularly from the Firewall application content inspection (Layer 4 through Layer 7)) (OPS Network)

• The Contractor will configure, optimize and test the transparent firewall failover functionality running in HA and standalone mode with online interfaces for the traffic impact (OPS Network)

• The Contractor will support External Support Platform (ESP) setup, including network platform configuration & Integration (Layer 2 and Layer 3) of switch, configure firewall with S2S VPN, DMZ, NAT and Internet using ACL policies, IPS policies, URL & Content filtering policies, VPN policies, NAT policies, hardening of switch and firewall as per the hardening guideline

• The Contractor to provide troubleshooting support during online deployment & integration (OPS Network)

Hardening Support:

• The Contractor will assist on the hardening of Online / Offline SMRC network equipment and firewalls

• The Contractor will assist on the hardening of Online / offline OPS firewalls (OPS Network).

• The Contractor will troubleshoot / fix if there are any operational / unknown issues occurs in the environment due to the hardening configuration on network devices (Offline, Online SMRC)

• The Contractor will support in case any issue with hardening of online firewalls / any operational issue occurs due to the hardening of online network devices (OPS Network).

• 5 days, 8.30am- 5.50pm
• Salary: $2800- $3000
• Location: East, and clients site whenever required

Job scope:

• To provide support on maintenance project.
• Handle system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.
• Hands on experience in managing LAN / WAN / Routers / Switches / DNS / VPN and Firewall is preferred.

Requirements:

• At least a Diploma in Engineering (Electrical/Electronic), Computer Science/Information Technology or equivalent.
• Must have at least 1-2 years of Server experience
• Able to work on scheduled standby on rotating weeks

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Job Description

Responsible for managing day to day support of operational tasks, requests, incidents and changes meeting customer’s requirements and agreed service levels. Perform and support regular preventive maintenance tasks.

The activities include:

• Respond and handling of customer requests/queries
• Incident resolution
• Change and Service Request fulfilment
• Problem ticket closure
• Preventive maintenance tasks fulfilment
• Vulnerability assessment
• to assist the Team Lead/Operations Manager to train and guide junior team members
• Develop and enhance NOC team capability

Key Responsibilities

• Experienced in troubleshooting system and network problems, diagnose and solve hardware/software issues, analysing system logs and identifying potential issues/incident.
• Analysing, troubleshooting and correcting network problems remotely and on-site
• Responsibility for documenting incident RCA report the configuration of the system and (network) system performance tuning
• Responsibility for security compliance, patching, health check & hardening remediation
• Maintaining and administering perimeter security systems such as firewalls and intrusion detection systems
• Performing standard or project change request as per change window
• Provide on-call 24 x 7 support on a rotating basis
• Responsible for applying operating system updates, patches, and configuration changes
• Perform Preventive Maintenance
• Participate in customer weekly sessions

Qualifications and Competencies

• Degree in Computer Science / IT or equivalent
• 3 years experience in network support and maintenance (LAN/WAN)
• Cisco router, switch, wireless - Advanced level
• Solarwinds - Basic/Advanced level
• Huawei - Basic/Advanced level
• Cisco DNAC - Basic/Advanced level
• Lantronix/DRDM - Basic/Advanced level
• Incident, SLA and Change Management
• Good Team Player
• Able to work independently
• Routing Switching Wireless product such as Cisco - Advanced level
• Splunk - Basic level
• ITILv4 Foundation - Foundation level
• Scripting /Automation - Basic level
• SDWAN - Basic level
• Cisco Certified Network Professional

- Hunter Role

- Working hours: 8.30am to 6.00pm, Mon - Fri

- Working Location: North area

- Travel expenses can be reimbursed.

Job Description :

• Building strong, professional relationships with key personnel to identify and secure new accounts.
• Coordinating the participation of company staff, including support, service, and management teams, to achieve account performance goals and meet customer expectations.
• Achieving assigned targets for profitable sales and strategic objectives within designated accounts.
• Continuously assessing, clarifying, and validating customer needs to ensure ongoing satisfaction.
• Leading the development of solutions that best address customer needs, while ensuring the involvement of all relevant company personnel.

Requirement

• Minimum of 3 to 5 years of relevant experience.
• Experience in the precision engineering industry will be an advantage.
• Willingness to travel overseas

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email to submit your resume.

We regret to inform that only shortlisted candidates will be notified.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Stella Tan Sin Yong

EA Personnel Reg. No.: R24124127

Work Location: West

Working Hours/Day: 8.30am - 6.00pm / Mon - Fri

Job Descriptions:

• Experience in setting up and configuration of communication and network system e.g.. Muxes, Radios, Public Address System, PABX, network switches and routers.
• Analyze, isolate and resolve system integration issues.
• Liaise with vendors for procurement of equipment.
• Assist in testing of system to ensure seamless deployment.
• Generate System and Installation Control Document.
• Plan, generate test cases and procedures to carry out acceptance tests.

Job Requirements:

• 3 years work experience in Telecommunication and Network Engineering
• Diploma in Engineering (Computer Network & Systems)
• Proficient in MS office and Visio.
• Possess strong interpersonal skills.
• Team player with pleasant personality.
• Prior working experience with MINDEF and/or MHA customer is an advantage.

Responsibilities:

• Good technical and project management abilities.
• Strong ability to develop, plan and organize resources efficiently.
• Communicating plans and challenges and options in engineering issues and solutions to various stakeholders and Clients alike.
• Inspiring a team of different nationalities and cultures.
• Professional integrity and exemplary conduct at all times.
• Proven problem-solving and achievements.
• Comfortable at work site conditions.
• Site supervision and able to co-ordinate well with sub-contractors, RE and RTO.

Requirements:

• At least 3 year(s) of relevant working experience in construction is required for this position.
• Candidate must possess at least a Degree in Engineering (Civil/Structural) or equivalent.
• Preferably Managers specializing in Engineering - Civil/Construction/Structural or equivalent.
• Knowledge in Microsoft project.
• Full-Time positions available.

Applicants are to email to [email protected]

Employment Type: 1 year contract (renewable subject to work performance)

Salary up to S$5,000

Responsibilities:

• Manage, configure, and troubleshoot hardware and software systems related to security surveillance, including IP CCTV, Perimeter Protection Systems (PPS), Physical Security Information Management Systems (PSIM), Video Management Systems (VMS), and audiovisual systems.
• Analyze, plan, implement, test, and manage integrated perimeter, video surveillance, and video analytics security systems, ensuring smooth operations.
• Collaborate with team members to meet clients' service delivery agreements and ensure seamless system functionality.
• Coordinate with contractors, clients, and partners to diagnose, resolve, and support both preventive and corrective maintenance of systems.
• Interpret and work with technical documentation, installation manuals, system drawings, and construction-related materials like floor plans.
• Assist the maintenance team to ensure system availability and reliability meets customer requirements.
• Identify opportunities to improve processes and implement new technologies for enhanced security and customer satisfaction.
• Conduct on-site electrical power and cabling work, ensuring adherence to construction safety and regulatory standards.
• Provide support during emergency situations, even outside of normal working hours, when required.
• Perform other technical-related duties as assigned.

Requirements:

• Diploma in Information Technology, Electrical/Electronic, Information Systems, or related discipline.
• 1-3 years of experience in security surveillance hardware and software administration, configuration, and troubleshooting.
• Strong understanding of IP CCTV systems, PPS, PSIM, VMS, and audiovisual systems.
• Ability to read and interpret technical documentation, system drawings, and construction plans.
• Hands-on experience in electrical power systems and cabling work, with a solid understanding of on-site operations.
• Familiarity with construction site safety regulations and protocols.
• Proven ability to work independently, manage multiple tasks, and handle pressure effectively.
• Strong problem-solving skills with excellent interpersonal, organizational, and teamwork abilities.
• Willingness to respond to emergency situations and provide support outside regular working hours.

Responsibilities:

• Supervise and coordinate subcontractors works to achieve daily work schedules and to ensure compliance with specific requirements
• Assist the Project Manager in planning and monitoring of construction activities and production of shop drawings
• Liaise with relevant consultants and authorities on technical and engineering matters
• Monitor and coordinate the work of Sub-cons and Supervisors
• Coordinate the inspection of Civil and Structural works

Requirements:

• Candidate must possess Bachelor's Degree in Civil Engineering
• Preferably with working experience in foundation works
• Proficient in Microsoft Office and knowledge of AUTOCAD
• Independent, diligent and highly motivated with excellent team spirit
• Willing to work overtime including weekends and public holidays when necessary

Applicants are to email to [email protected]

Responsibilities:

• Good technical and project management abilities.
• Strong ability to develop, plan and organize resources efficiently.
• Communicating plans and challenges and options in engineering issues and solutions to various stakeholders and Clients alike.
• Inspiring a team of different nationalities and cultures.
• Professional integrity and exemplary conduct at all times.
• Proven problem-solving and achievements.
• Comfortable at work site conditions.
• Site supervision and able to co-ordinate well with sub-contractors, RE and RTO.

Requirements:

• At least 3 year(s) of relevant working experience in construction is required for this position.
• Candidate must possess at least a Degree in Engineering (Civil/Structural) or equivalent.
• Preferably Managers specializing in Engineering - Civil/Construction/Structural or equivalent.
• Knowledge in Microsoft project.
• Full-Time positions available.

Applicants are to email to [email protected]

Responsibilities:

• Supervise and coordinate subcontractors works to achieve daily work schedules and to ensure compliance with specific requirements
• Assist the Project Manager in planning and monitoring of construction activities and production of shop drawings
• Liaise with relevant consultants and authorities on technical and engineering matters
• Monitor and coordinate the work of Sub-cons and Supervisors
• Coordinate the inspection of Civil and Structural works

Requirements:

• Candidate must possess Bachelor's Degree in Civil Engineering
• Preferably with working experience in foundation works
• Proficient in Microsoft Office and knowledge of AUTOCAD
• Independent, diligent and highly motivated with excellent team spirit
• Willing to work overtime including weekends and public holidays when necessary

Applicants are to email to [email protected]

Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

• Assist Project Engineers on site
• Monitor site progress and schedule
• Manage to set out, level and survey the site
• Responsible for checking/advise of plans, drawings and qty for accuracy of calculations of area are followed correctly.
• Responsible to ensure all materials used and work performed area are in accordance with the specifications and budget.
• Supervise of project crews and subcontractors
• Coordination work with authorities, clients and QP
• Ensure safety,health & security in charge area

Requirement:-

• Minimum degree holder in Civil Engineering (Recognised by PE Board)
• Minimum 3 years experience in civil engineering
• Able to work under fast environment

Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

· Planning the detail construction methods, sequences, and procedures, and in liaison with the subcontractors under the direction and instruction of the Construction Manager.

· Directing the field construction works with strict control, especially on works activities that been identified to be hazardous and of high risky and ensuring their compliances of safe work practice.

· Ensuring all the works to conform to the Specifications, Works sequence and methods of construction.

· Identifying nonconformities and reporting them to the Construction Manager and Quality Management Representative.

· Supervising the field construction works including safety arrangements.

· Coordinate with Site Engineers of the subcontractors’ works.

· Carrying out or attending inspections and monitoring the progress of the works.

· Handling Engineering matters including work procedures and shop drawings.

· Managing the subcontractors and workers.

· Implementing the Quality System in the field construction works.

· Produce working schedules of short terms and keep records of the works.

· Ensuring that work schedules are followed and achieve milestones dates.

· Reporting to the Construction Manager if any changes and conflicts are ordered or found in the construction.

Qualifications and Education Requirements:-

· Minimum 10 years of relevant experience after obtaining a Degree in Civil Engineering recognised by the PE board, or other qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer or Degree in the relevant field subject to the acceptance by the Engineer and minimum 5 years of experience in the construction supervision of major underground structures of a similar nature.

The ideal candidate will be responsible for designing, developing, testing, and debugging responsive web and mobile applications for the company. Using JavaScript, HTML, and CSS, this candidate will be able to translate user and business needs into functional frontend design.

Responsibilities

· Designing, developing, and testing UI for mobile and web applications

· Build reusable code and libraries for future use

· Accurately translate user and business needs into functional frontend code

Qualifications

· 6+ years of software engineering experience primarily leveraging ReactJS.

· Strong engineering and technical background with demonstrable enterprise development experience using ReactJS and RESTful APIs.

· Deep understanding of JavaScript/Typescript, HTML5 and CSS.

· Experience using Redux, Web Workers and PWAs.

· Experience with continuous integration and build (CI/CD) process & tools.

· Proven ability to quickly understand functional requirements and technical concepts.

· Experience with TDD and familiarity with testing frameworks, ideally Cypress, Selenium and PACT.

· Exposure to mobile development via React Native an advantage.

· GitHub portfolio an advantage.

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Review project specs to ensure equipment meets contract requirements
• Prepare and approve instrument and electrical deliverables (e.g. wiring diagrams, lists, data sheets)
• Create material requests and evaluate bids for electrical and instrument equipment
• Develop engineering standards and procedures for design
• Monitor project costs and schedules
• Attend technical meetings and address client feedback
• Support plant start-up and on-site troubleshooting
• Provide technical support and estimates to the sales team
• Advise engineers and Project Managers
• Follow company health and safety guidelines

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5 years of relevant experience
• Familiar with key engineering concepts and practices
• Strong organizational and multi-tasking skills
• Excellent problem-solving and analytical abilities
• Proficient in Microsoft Office, Microsoft Project, and AutoCAD
• Strong verbal and written communication skills
• Able to work independently with attention to detail
• Good teamwork skills
• Knowledge of hazard area classification
• Fluent in English (speaking and writing)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Assistant Engineer x 8 (No experience required, office hrs)

(Gov project, stable role)

Singaporean Only, security clearance required

Salary range:

• Basic Salary $2800 - $3500 + Site Allowance + Standby Allowance + Bonus + Other Benefits

Responsibilities:

• Perform Preventive & Corrective maintenance work involving fault troubleshooting, diagnosis & replacement of equipment/ component at permanent sites
• Perform testing of equipment
• Provide troubleshooting to technical problem on communication system

Requirements:

• Higher Nitec/ Diploma in Electrical/Electronics, Communications/ Computer Engineering/ System Engineering or InfoComm Technology
• Training will be provided
• Able to perform standby duties (based on roster)

Additional Information:

• Stable role, Government Project (Singaporean Only)
• Working hours: Office Hours (Mon – Fri)
• Location: Near Paya Lebar/ Tampines/ Bedok

Interested applicants simply email your resume to: [email protected]

We regret to inform that only shortlisted applicants will be notified.

• Basic up to $4,200, depending on experience
• No experience also welcomed to apply, with minimum qualifications required
• Annual Increment + Performance Bonus
• Disciplines in either M&E or Building Services

Responsibilities:

• Lead project phases, ensuring adherence to resource, quality, and risk standards, while managing project profitability.
• Coordinate administrative aspects of projects, including reporting, claims, and invoice processing, up to final handover documentation.
• Identify and address project issues, proposing quality, risk, and administrative process improvements.
• Foster effective communication and negotiation, liaising between internal and external stakeholders to ensure project cohesion.
• Manage subcontractor integration, ensuring compliance with technical requirements.
• Interpret project drawings, identify discrepancies across trades, and develop resolutions.
• Oversee project planning, scheduling, and execution of alteration and addition (A&A) works to ensure on-time completion.
• Regularly update management and clients on project progress, maintaining transparency and accountability.

Requirements:

• A Diploma or Bachelor's Degree in Mechanical/Electrical Engineering or Civil/Construction/Building Services Engineering, with a strong understanding of electrical installations or relevant field.
• Minimum 5 years of experience in a related field, with at least 3 years in facilities/building maintenance.
• Proven leadership ability, with the skills to manage and motivate a team effectively.
• Excellent organizational and multitasking skills, capable of managing multiple projects concurrently.
• Class 3 driving license is advantageous.
• Demonstrated commitment, positivity, and the drive to work independently and deliver excellence.

Tyson Jay Management Pte Ltd | EA License No.: 24C2479

Ivan Lim | EA Personnel No.: R1109856

Key Responsibilities:

• Assist in the planning, execution, and monitoring of civil engineering projects to ensure they are completed on time and within budget.
• Supervise construction activities on-site, ensuring compliance with technical specifications, safety regulations, and quality standards.
• Liaise with project managers, clients, subcontractors, and authorities to ensure effective communication and project alignment.
• Conduct regular site inspections to monitor progress, quality of work, and adherence to safety protocols.
• Review technical drawings and designs for accuracy and ensure they are implemented correctly on-site.
• Prepare progress reports and documentation for management and stakeholders.
• Identify potential issues or risks during project execution and develop appropriate mitigation strategies.

Qualifications:

• Education: Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board (PEB) or Building Construction Authority (BCA).
• Experience: Minimum of 8-10 years of relevant local experience in civil engineering projects, specifically in infrastructure, sewer & drainage, and roadworks.
• Certifications: Possession of Resident Engineer (RE) or Resident Technical Officer (RTO) certification is preferred.
• Project Exposure: Experience working on LTA or PUB projects is highly desirable.

Skills:

• Strong technical knowledge of civil engineering principles and practices.
• Excellent leadership and team collaboration skills.
• Proficient in project management software, AutoCAD, MS Office, and MS Project.
• Ability to work independently with minimal supervision while meeting tight deadlines.
• Strong problem-solving skills and attention to detail.

Benefits:

• Competitive salary package commensurate with experience.
• Opportunities for professional development and career advancement.
• A dynamic work environment focused on innovation and sustainability.

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Daniel Lim | Registration Number: R24124455 | AlwaysHired Pte Ltd

EA Licence No: 24C2293

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

• MNC Company
• Salary $3500 - $4500 + Allowances + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working days: Monday to Friday
• Working hours: 8.30am – 5.30pm

Job Responsibilities:

• To supervise, execute and coordinate project activities together with a group of Engineers and Technicians leading to successful project completion
• Monitor and control project on schedule, within budgeted cost and quality standards
• Work closely with consultant/owner to ensure project is delivered according to requirements
• To perform system programming and troubleshooting during project implementation
• Any other tasks assigned by superior

Job Requirements:

• Possess minimum Higher Nitec and/or Diploma in Electronics and/or Electrical Engineering or relevant field with 1-2 years of relevant experience
• Possess Class 3 Driving License will be an advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: North
• Working days: Monday to Friday
• Working hours: 8am – 5pm

Job Responsibilities:

• Perform visual and functional checks on the products on site
• Handle trouble shooting on products on site and identify any leaking or faulty installation of the components
• Provide site supervision on contractors for proper installation of the products.
• Communicate with workers on site and supervise their tasks
• Present on improvement plans that generate pull through of product sales
• Work closely with Sales to promote on-site services contracts
• Provide both technical and market insight support to sales department for Oil & Gas market and mechanical packages
• Any other ad-hoc duties as assigned

Job Requirements:

• Possess minimum Bachelor’s degree in Instrument / Mechanical engineering or strong science/technical discipline with at least 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is a well established MNC who is a global leader in engraving technologies. Their sales office is located at KAKI BUKIT area (walking distance from Kaki Bukit MRT). They are currently looking for a PRODUCT SUPPORT ENGINEER to join their team.

Basic salary: up to $4000
Work Location: Kaki Bukit (near Kaki Bukit MRT)
Work Days: 5 Days, 8.30am - 5.30pm

Responsibilities:

• To support the sales team with on-site or remote demonstrations, installation / training / reparation of the product scope under service responsibility throughout the entire region.
• Provide online, remote, or on-site demonstrations or testing of the supported solutions and installation/training
• Become a participant in sales team training courses and train sales personnel on-site to improve the effectiveness of their exploration actions
• Collaborate with sales representatives to participate in organizing sales activities to achieve established revenue and profit targets (exhibitions, roadshows, phone and on-site exploration, potential customer follow-up, etc)
• Weekly reports may affect the company's business positioning activities and market development (customer needs, standards, competition, etc)
• Maintain a high level of market, technical, and product knowledge by attending company training courses
• Monitor changes in market application demand

Requirements:

• At least a Diploma in Engineering fields
• At least 5 years of commercial experience in selling or supporting industrial equipment (ideally CNC and/or Laser).
• Local & ASEAN travelling required
• Proficient in MS Word, Excel, CRM software and CAD/CAM software
• Good command of verbal and written English

Please submit your resume in MS Word format to [email protected]

Please remember to include your
1) Recent photo

2) Current salary & Expected salary
3) Notice period

UNITED PERSONNEL SERVICES

21 Bukit Batok Crescent,

WCEGA Tower #11-74,

Singapore 658065

Tel: +65 6562 2321

www.united-personnel.com

Registration No: R1103478

EA Licence Number: 05C5278

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates would be notified)

Salary: up to $3200

Duration: 1 year contract convertible to perm

Working Days & Hours: Mon-Fri Office Hours

Location: Outram

Job Description:

* Assist in the installation, calibration, and commissioning of medical equipment.

* Perform routine inspections, preventive maintenance, and repairs on medical equipment.

* Troubleshoot equipment malfunctions and provide timely resolutions.

* Maintain accurate documentation of equipment maintenance and repair activities.

* Adhere to all safety protocols and regulations.

* Any other duties assigned from time to time

Job Requirements: Min Diploma in Biomedical/Electrical Engineering or similar w min 2 yrs of relevant service engineer experience in medical device industry/microscope experience

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Responsibilities:

• Responsible for machine setup, module alignment, vision alignment/calibration, and machine checkout.
• Ensure machine meet customer specifications.
• Provide trainings and testing on the machines.
• Provide occasional on-site support, both locally and internationally.

Requirements:

• NITEC, Higher NITEC, or Diploma in Engineering.
• At least 2-3 years of automation machine experience in semiconductor industries.
• Proficiency in machinery automation, including electrical, servo, sensor, and pneumatic systems.
• Ability to read mechanical and electrical drawings is advantageous.
• Experience in mechanical alignment, motor tuning, or vision systems is a plus.
• Positive attitude and willingness to take on additional responsibilities as needed.

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.