. QAQC Inspector (Fabrication /Welding)

Responsibilities:

• Preparing or establishing that a welding procedure is available, has been approved as

required by the appropriate authority and is being employed in production.

• Witnessing of welder and procedure approval tests that including of the preparation of test

pieces and destructive tests and verifying compliance with appropriate standards and

specifications.

• Verification that adequate and valid welder approvals are available, and that only approved

welders as required are used in production.

• Interpretation of weld drawings and weld symbols.

• Performing of visual inspection and ensure that all finished goods are checked and approved

prior to any delivery of handover.

• Verification that post weld heat treatment has been conducted in accordance with

specification requirements.

• Appreciation of the factors influencing the formation of weld defects and their acceptability

in relation to the written specification.

• Coordination with QC Inspector (Hull/Structure and Piping) and NDT Coordinator, to verify

and ensure that all finished welds are checked and approved prior to any delivery of

handover.

• Ensure that quality assurance standards and procedures are maintained.

• Ensure that reports that are required are completed accordingly to the project

specifications.

• Liaise with Contractor, Production and Client’s representative to ensure the product is

checked and complied with the project quality plan and specifications.

• Perform any other tasks as may be assigned by the supervisor.

• Ensure compliance to relevant government regulations and company’s quality, safety, health

and environmental (QSHE) policies, practices and procedures at all times.

Requirements:

• Minimum Diploma in Engineering or relevant field of International certification (e.g. AWSCWI or CSWIP 3.1 WI).

• Physically fit since some of tasks require lifting of some equipment.

• A team player with the ability to work independently as well as in a team

• Good communication skills, meticulous, resourceful, able to multi-task

• Computer literary (MS. Office).

Job Description & Requirements

1. Conducts field inspection and verify conformance to approved specifications.
2. Conducts inspection on the installation of product such as AHU etc.
3. Prepare and review documents for project close-out requirements.
4. Conducts in-house orientation on company policies and procedures to employees in preparation for their incorporation to company.
5. Supervise the implementation of punch list (balance of works) issued by client to conform to the established client standards and specifications.
6. Prepare QC inspection reports and monthly accomplishment reports.
7. Proper checklist and progress report must be generated.
8. Conducts line checking on installed items, issue punch list and verify accomplishment prior to endorsement for testing.
9. Conducts pre-qualification of welders for pipe welding works.
10. Conducts inspection on installation of fans and blowers including pre-fabrication and initial testing.
11. Prepare inspection reports for accepted and rejected activities.
12. Conducts receiving inspection on critical materials prior to installation.
13. Attend to coordination meetings and address problems concerning installation problems.
14. Generate Non-conformance reports to activities not conforming to project specifications and monitor detailed action plans for close-out.
15. Prepare and maintain quality manual for the organization.
16. Generate work instructions, company procedures for use by the organization and submission to client.
17. Conduct and prepare analysis of generated NCRs, complaints, and audit results.
18. Arrange with third party inspectors for necessary testing.
19. Implement quality system to the project.
20. Arrange materials documentation requirements and submits to Client Inspection Department for acceptance.
21. Prepare Quality Inspection and Test Plan (ITP) for submission to clients.
22. Review Mill Test Certificates. (For Production Related Works only).
23. Setting QA compliance objectives and ensuring that targets are achieved.
24. Maintaining awareness of the business context and company profitability, including budgetary control issues.
25. Assessing the product specifications of the company and its suppliers, and comparing with customer requirements.
26. Working with purchasing staff to establish quality requirements from external suppliers.
27. Considering the application of environmental and health and safety standards.
28. Agreeing standards and establishing clearly defined quality methods for staff to apply.
29. Defining quality procedures in conjunction with operating staff.
30. Setting up and maintaining controls and documentation procedures.
31. Ensuring tests and procedures are properly understood, carried out and evaluated and that product modifications are investigated if necessary.
32. Supervising technical staff in carrying out tests and checks.
33. Bringing together staff of different disciplines and driving the group to plan, formulate and agree comprehensive quality procedures.
34. Persuading reluctant staff to change their way of working to incorporate quality methods.
35. All QC items must be reported to the Operations manager.
36. Establishing standards of service for customers or clients.
37. Establish and define Standards and Procedure of development requirements for the Product.
38. Formulate, implement and review work procedures to ensure effectiveness and efficiency to meet quality requirements.
39. Evaluate according to ISO requirements and actively provide constructive feedback to development team.
40. Establish and maintain high quality test procedures and methods to be used in present and future software and hardware testing and development that comply with the company quality standards and deliverables.
41. Prepare the requirements for components and / or assembled parts of the incoming inspections.
42. Oversee quality tests and qualify the release of products at the manufacturing side.
43. Oversee the resolution of quality-related problems in the development and manufacturing environment resulting from supply or production imperfections.

REQUIREMENT

1. Diploma in Mechanical Engineering related discipline

2. At least 2 years of related work experience in quality control

3. Good office coordination skill and interpersonal skill.

4. Independent and resourceful.

5. Knowledgeable in ISO documents preparation.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives. Our dedication to excellence and our strong track record have earned us a distinctive reputation for quality and trust as a global technology, defence and engineering group, spanning across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance.

Join our team of highly motivated individuals in the engineering cutting edge solutions that unify both cybersecurity and productivity. As our Cyber Security Product Engineer, you will join a team of specialised engineers to deploy, configure and support our indigenous and robustness cybersecurity products.

Job Description

• Participate in the product and project implementation and coordinate new installations, designs and migrations for security technology and solutions.
• Understand customer’s requirements and transform to technical control & technical solution
• Install, configure and upgrade Cyber Security Products
• Troubleshooting, diagnosing and resolving hardware, software, and other network and system problems on the customer's site
• Liaise with vendors and internal team for resolution solutioning for problems encountered.
• Monitor compliance to applicable codes, best practices, security standards and specifications for the delivery of security technology and solutions.
• Work within established configuration and change management policies to ensure awareness, approval and success of changes made to the ICT infrastructure.
• Cooperate and communicate effectively with project manager and coordinate with other project participants to deliver functional solutions and provide assistance and technical support.
• Create and maintain technical documentation for reference and reporting.
• Create, oversee and test system integration and security requirements (e.g. system integration test plan, system security acceptance test plan).
• Review findings from vulnerability assessment and penetration testing.
• You will learn system and cyber security knowledge with the team.

Requirements

• Possess 5-7 years of similar experience
• Familiar with cyber security products and project implementation
• Possess networking knowledge
• Possess basic knowledge in Linux
• Soft skills – Problem Solving, Communication and Teamwork Skills
• Singaporean only
• Work location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Responsibilities:

• Ensure proper risk assessment is in place to provide a safe working environment for workforce by periodically reviewing risks and hazards associated to workplace, executing control measures and communicate effectively to workforce.
• Respond to technical queries from subordinates to account for timely project completion by consulting relevant parties such as mould loft and engineering department for practical solution.
• Monitor quality of welding and NDT completion on end products to prevent carry over work to next station by preforming on site checks and reviewing NDT records.
• Set daily targets for workforce to achieve to account for timely project completion by monitoring daily output and conducting daily reviews of the results.
• Study production drawings to spot possible mistakes or possible fabrication issues to ensure production schedule can be met without unexpected delays by detailed discussion and review of drawings with technical staffs.
• Prepare weekly report on progress and KPI to ensure project progress in on track by monitoring block status and compiling production progress data from site.
• Identify bottlenecks to ensure no unexpected delays to project progress by conducting meetings with subordinates, analyzing weekly reports and formulate optimal production flows for any issues identified.
• Review manpower allocation and effectiveness to ensure project progress is on track by analyzing daily and weekly KPI against progress, discussing with managers should additional manpower or reallocation of manpower is needed.
• Performs supervision on site to ensure fabrication work have been safely executed accordingly to drawings and quality requirements to account for timely project completion by checks on the floor, communicating and getting feedback from workforce.
• Identify the production capacity and plan station schedule to ensure accordance to sequence by comparing to hullshop master schedule and hullshop historical productivity data.
• Set the KPI and manpower allocation for each station to achieve required schedule by analyzing workforce and facilities capabilities and historical date and previous projects.
• Study project requirements, identify any gap that exists with current hullshop practices and propose recommendations to close the gaps to ensure no unexpected delays to project schedule by conducting reviews and meetings with QA and QC personnel.
• Ensure Standard Operation Procedures (SOP) in place so that work can be performed according to project requirements by communicating SOP's to workforce.
• Determine block fabrication sequence to ensure most effective way to fabricate blocks by analyzing drawing and 3D model and holding discussion with production and mould loft team.
• Ensure proper lifting plan is available for blocks to account for safe block lifting by advising engineering lifting team on block fabrication method in advance.
• Review subordinates competency to ensure effectiveness in performing work by analyzing productivity data, non conformance received and feedback from QA, QC and clients.
• Take active role in Incident Investigation to find root cause and proper preventive measures are implemented by conducting interviews with injured person(s) and witnesses, analyzing accident scenes and other investigative processes together with HSE Team.
• Propose training required by workforce to prevent shortfall in certain roles by compiling workforce skills and comparing with production requirements.
• Participate in Safety Innovation Programs by actively contributing to department Safety Innovation Team

JOB REQUIREMENTS

Requirements:

• Degree in Engineering
• At least 3 years of relevant working experience, preferably in marine/ offshore industry
• Knowledge of functional and operational requirements related to design of all types of ships and offshore vessels
• Knowledge and experience of his engineering field
• Knowledge of regulatory and class requirements
• Able to read and understand engineering drawings
• Possess good communication and interpersonal skills
• Possess supervisory skill to coach and motivate staff
• Able to work in a team
• Proficient in Microsoft Office and engineering design software (e.g. Tribon, GEMS)

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

WE NEED EXPERICEND FOR METAL WOKS , ALUMINMUM WORKS , WETRADE WORKS AND TILES WORKS FOR CONSTRUCTION (HDB / CONDO ) , NEED HAVE EXCELLENT IN CHINESE AND ENGLISH COMMICATION SKLII AND ACKNOWLEGE DESIGN WORK ,NEED TO GO THROUGH WITH SITE COODINATOR FOR BQ AND MATERAILS ORDER AND DRWAING SUBMISSION WORKS ，ALLOW TO FOLLOW AND COORDINATE WITH SITE WORKS AND PROGRESS WITH MAINCON , SITE MEETING

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Benefits:

• Basic Salary up to $6,000 with yearly increment based on performance.
• 5.5 Days (Monday to Friday, 8am to 5pm)/(Saturday, 8am to 12pm)
• Our company emphasises on good career progression

Job Description:

This is a full time role for a Senior Service Engineer (Ship Cranes) located in Jurong East. Our company is an international crane & deck machinery repair specialist and offers crane and deck machinery related repair services and parts supply to the Merchant Marine- and Offshore industry and you will be responsible for field service tasks, including troubleshooting and repairing deck cranes, grabs, windlasses, hatch cover hydraulics, and davits.

Qualifications:

• Min 5 years' experience sailing as Electrical Officer on bulkers equipped with deck cranes and has carried out troubleshooting and repairing Marine Cranes, Windlasses & other hydraulic systems on board,
• In-depth knowledge and understanding of PLC controlled electro-hydraulic cranes & hydraulic machinery.
• Able to read and comprehend electric and hydraulic diagrams.
• Able to independently troubleshoot electrical, hydraulic and mechanical problems.
• Able to supervise a team of mechanics and carry out large repair projects as Lead Engineer on board, on voyage and in Ship Yards.
• Able to write technical reports and able to communicate with owners' representatives.
• Previous employment as service engineer with one of the leading deck crane manufacturers will be an added advantage.
• Experience with variable frequency drives (VFD) will be an added advantage

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

• 5 days, Jurong, Transport provided
• $4200 - $5000 basic salary, AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Minimum 1 year of experience in Process Engineering relating to Supply Chain
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• 5 days, MNC, Boon Lay, transport provided (2 ways)
• Salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Minimum 1 year to 2 years of relevant experience
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Job Requirements

1) To Work as lead Engineer for Oil & Gas Project

2) Leading a Team of Electrical Engineers in Preparation & Review of Load lists, Single Line diagram of PCC, PMCC, MCC, DB's, Equipment Sizing Calculation, System Study through ETAP (Version 19.1) and Preparation & Review of Layouts like Hazardous Area classification, Lighting Layout, Cable and Power Layout, Substation Equipment layout, Earthing & Lightning protection Layout.

3) Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies

4) Preparation, Monitoring and Control Engineering Document Control List and expedite for delay/ approvals/resolution of open issues

5) Review and Ensures that all works are carried out in accordance with project specification. Maintain Design integrity and quality within the Project Engineering Team

6) Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.

7) Preparation of Material Requisition, Specifications, Technical Bid Evaluation for Electrical works.

8) Preparation and Compliance for Engineering Audit Requirements.

9) Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.

10) Technical assistance to construction activities and attending to Site Queries.

11)Reviewing Vendor Drawings for Transformers, Switchgears, Cables, Distribution Boards, Junction Box, LCS, Motors etc.

12) FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.

13) Coordination with PMC / QP and Construction Coordination.

14) Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness and correctness in works

15) Inspecting various equipment like LV & MV Bus duct, LV & MV Switchgear, Cables, Transformer, AC / DC UPS

16) Field Engineering Support Activities to complete the task in accordance with the project schedule.

17) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

18) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelors’ Degree in Electrical Engineering

Experience

Preferably Minimum 15 years of experience

Software Requirements

ETAP, DIALUX, Auto cad, MS Excel, MS Word

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

• 5 days, MNC, Boon Lay, transport provided (2 ways)
• Salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Minimum 1 year to 2 years of relevant experience
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Degree in Mechanical Engineering

Minimum 3 years M & E Experience

Experience in Fire Sprinkler System

Autocad Skills and Computer Skills

independent Self-motivated, hard working and able to work as a team

To assist Project Manager to liaise with clients and consultants on Projects

To co-ordinate sub-contract works

Responsibilities:

• Designs, plans, and handles testing, commissioning, software programming and supervision on site for BMS on project plan, specifications, and contract documents.
• Analyses plans, specifications, and contract to determine project requirements.
• Prepares submittals containing schematics, descriptions and technical literature as required. Maintains current design documents throughout project duration.
• Prepares engineering re-estimate reports and minimizes report variances.
• Perform testing & commissioning of BMS.
• HVAC experience and sequence of preparation for BMS
• Experience in BMS technical submittals preparation, method of statement, compliance statement and OMM.
• Experience in IO point schedules, assignments and materials selection with value engineering
• With logical knowledge in ACMV & HVAC system control logic.
• Network and MS office & project background knowledge is a must.
• Be aware of all kinds of risks and their controls in your work environment.
• Be a part of site EHS inspections, hazard/ risk assessments and recommend mitigation measures.
• Immediately inform the site EHS officer/site manager of any additional EHS risks.
  Stop the work if any unsafe conditions are identified.
• Project management skill required.

Requirements:

• Degree/ Diploma in Mechanical/ Electrical engineering or its equivalent

• Min 2 years related experience in HVAC/ BAS industry

• Strong customer management & problem solving skills

• Excellent communication & interpersonal skills

Job Description:

• Design FA project inclusive of tooling, artwork, material and process.
• Draft drawing for making of tooling and artwork.
• Liaise with suppliers regarding the making of tooling and artwork.
• Create job ticket which consists of material and process.
• Co-ordinate FA run with FA report submission
• Co-ordinate product transfer from US to Singapore facility.
• Develop and fabricate test jig/tool for testing of functionality of finish product.
• Maintain all test jig/ tool used in production.
• Perform product failure analysis, as well as reduce cost through yield improvement, cycle time reduction and process enhancement.
• Coordinate the Engineering Change Notice (ECN) process.
• Putting up sales quotation for the customer through the sales department.
• Any other task assigned

Requirements:

• Diploma in Electrical / Electronics / Mechanical or Microelectronics Engineering.
• Knowledge of 3D modeling software such as Pro/Engineer and AutoCAD.
• Need to be flexible on working hours as support over the weekends may be required.
• Must be a self-motivated team player with good presentation and communication skills
• Good project and time management capabilities

Responsibilities:

· You will promote and propose Trane Chiller & Equipment to building consultants and contractors

· Responsible for developing long term customer relationships

· Building close business relationship with customers especially key accounts

· Maximizing account penetration and customer retention

· Identify potential opportunities & develop solutions with existing & new customers

· Update forecast timely into the system

· Negotiates value, addresses resistance, and close the sales. Differentiates & made Trane as preferred supplier

· Any other duties as assigned from time to time

· You also need to ensure all works carried out in accordance with the specified quality and EHS standards.

Requirement:

· Degree in Mechanical/ Electrical engineering or its equivalent

· 1-2 years in Engineering sales, experience in HVAC industry will be a plus

· Customer driven with excellent communication & interpersonal skills

· Candidates with the relevant education qualifications but no prior work experience is welcome to apply

Responsibilities:

• Promote and propose Trane Controls Solutions to building owners, consultants and contractors

• Develop long term customer relationships and maximize account penetration and customer retention

• Identify potential opportunities & develop solutions with existing & new customers

• Work closely with other department to promote package solution and enhance the win rate

• Ability to effectively writes and presents proposals.

• Negotiates value, addresses resistance and closes the sale. Differentiates & made Trane as preferred supplier.

• Ensure all works carried out in accordance with the specified quality and EHS standards.

Requirements:

• Diploma/ Degree in Mechanical/ Electrical engineering or its equivalent

• At least 1-3 years’ experience in selling HVAC or building automation system

• Good presentation, interpersonal and communication skills

• Customer driven mindset

Addcel has been delivering deep value to clients across the Oil and Gas, Petrochemical, Energy, Pharmaceutical, Data Centers, Environmental Solutions and Infrastructure industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation such as structural steel, piping, storage tanks & silos as well as the equipment installation, we take pride and passion in all that we do.

The Project Engineer reports to the Project Manager and is responsible for the below:

• Prepare and submit required documents for Project, working with respective stack holders based on project proposal.
• Prepare and maintain the project document summary.
• Upon confirmation of project resources, update other stakeholders to prepare submission and record for final MDR.
• Prepare and follow up with Engineering and drawing related documents.
• Receive, review, update and issue latest revised drawing to project team.
• Prepare and monitor STQ / RFI for technical details.
• Preparation and updating of project schedule.
• Prepare and update Regular reports and Project Forecast.
• Base on approved layout and schematic drawings, prepare and update MTO upon approval from client.
• Escalate any abnormalities compared to bidding quantity to PM and procurement team.
• Update the revised MTO (material take off) to project team, ensuring material availability as well as manpower resources.
• Attend daily toolbox meeting.
• Update Project managers about the progress, plans and challenges.
• Assist in the preparation of the complete subcontract Scope of Work.
• Work with all stakeholders to ensure that we have the latest equipment connection drawings.
• Prepare, monitor and update status to procurement, and submit monthly progress claim.
• Record additional works and variation orders.
• Prepare variation claim with proposal team.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Engineering or equivalent.
• Min. 3 - 5 years of relevant working experience, preferably managing projects for Semi-con, Pharma & Oil & Gas.
• Proficient knowledge in AutoCAD software & Microsoft Office.
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Join us in adding value everyway and creating value everyday with pride and with passion!

Responsibilities:

• Perform servicing of Trane chillers & other HVAC equipment
• Carry out corrective and preventive maintenance for chillers and related equipment
• Have basic knowledge of overhaul & start up jobs on Trane chillers
• Liaising with customers to resolve complaints cases
• Coordination with vendors and contractors in job coordination
• Assist or involve in schedule planning & prepare technical analysis reports for management’s review
• Ensure all works carried out in accordance with the specified quality and EHS standards
• Any other duties as deemed necessary from times to times

Requirements:

• NITEC/ Diploma/ Degree in Mechanical, Electrical, Electronic Engineering or equivalent
• Relevant experience in Chiller Systems/ Air-conditioning
• Positive attitude

Job Descriptions:

• Collaborates with the commercial/business development team to develop innovative and competitive technical solutions for bidding projects.
• Prepares detailed technical method statements, drawings, and integrated service and equipment solutions to meet project requirements.
• Reviews and understands bidding employer’s requirement documents, project specifications, and process data.
• Translates employer requirements into effective contractor solutions that align with project goals.
• Monitors market trends to ensure tender documents remain competitive and relevant, making necessary adjustments.
• Implements improvements in the tender process to enhance the company’s market position and competitiveness.
• Works closely with various department stakeholders to gather necessary information for bidding proposals.
• Consolidates and integrates collected information into comprehensive bid proposals.
• Conducts internal reporting of tender solutions to secure management approval for bid submissions.
• Provides timely and accurate updates on bid progress to the tender manager.
• Supports the tender manager in developing commercial bid solutions and engaging with the market as required.
• Support engineering budget (estimation) and cost control.
• Participates in market visits to assess and incorporate subcontractor solutions into the company’s proposals.
• Evaluates subcontractor technical solutions to ensure alignment with project requirements and company standards.
• Integrates subcontractor solutions into the company’s bid proposals effectively.

Requirements:

• Minimum Diploma or Bachelor’s degree in engineering, or a related field.
• Prior experience and knowledge in offshore wind projects is highly desirable and will be given preference.
• Proven experience in technical solution development, preferably within a commercial/business development context.
• Strong understanding of bidding processes, tender documentation, and market trends.
• Excellent analytical skills and attention to detail.
• Effective communication and collaboration skills to work with cross-functional teams.
• Ability to manage multiple projects and meet tight deadlines

Job Description

• Monitor, track, and provide timely project progress reports to the management
• Report to Project Manager / Site Manager for the arrangement of work
• Prepare the specification and data sheet as per codes / standards, project, and client’s requirement,
• Responsible of the submission and approval of materials in compliance to the specification;
• Responsible monitoring of work progress on site
• Co-ordinate the inspection work on site and installation works
• Handling technical and engineering problems on site
• Ensure site safety and proper execution of site work procedure on site
• Monitor and co-ordinate the works of subcontractors

Requirements

• Degree or Diploma in Mechanical Engineering / Building / Project Management or equivalent.
• Min. 2 years relevant working experience in the construction industry (building facade).
• Strong leadership, organizational, planning, and interpersonal skills.
• Good working attitude with a high level of professionalism, integrity, initiative, and being a team player.
• Knowledge and/or experience in contractual management is an added advantage.

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL