Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or related/equivalent discipline
• Experience / knowledge in RTL, C/C++ programming and verification
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours
• C++/SystemC knowledge with High Level Synthesis experience is a plus.
• Experience / knowledge in CMOS Image Sensor is a plus

Role: Quality Engineer (QE)

Position Overview:

The Quality Engineer is responsible for ensuring the quality of construction materials, processes, and workmanship throughout a project. This role involves QA/QC document developing; monitoring site quality control activities; monitoring compliance with standards; implementing quality assurance procedures to deliver projects that meet contract, client specifications, international standards and Singapore regulatory requirements. This role is essential to delivering high-quality, durable, and safe civil engineering projects while maintaining efficiency and minimizing risks.

Key Responsibilities:

1. Take part in developing QA procedures as per the required by project Quality Assurance Plan.

2. Develop and/or review QC report templates, checklists as per ITPs.

3. Take part in developing quality training materials as per project quality requirements, and technical specifications. Conduct quality training to subcontractors’ QC inspectors and site supervisors.

4. Conduct regular checks for site QC activities and QC report completion.

5. Take part in project internal quality audits in accordance with project audit procedure to ensure compliance with company ISO 9001 QMS, Singapore regulatory requirements. Identify non-conformities and work with project teams to implement corrective and preventive actions.

6. Take part in project external quality audits to subcontractors in accordance with project audit procedure to ensure compliance with subcontract, project specifications, codes, and Singapore regulatory requirements. Identify non-conformities and work with project teams to implement corrective and preventive actions.

7. Regularly monitor project KPIs, ensure out-of-target KPIs are identified and raised to applicable subcontractors for root cause analysis, at the meantime, report to QAQC manager.

8. Coordinate with discipline engineers, subcontractors, the client, third party inspectors to ensure project quality requirements are met.

Work Environment:

Ø Combination of office and on-site work.

Ø Working overtime may be required, and working at a fast pace.

Requirements for the role:

Ø Degree or Advanced Diploma in Civil Engineering or related engineering field.

Ø At least 6 years of relevant QE experience in Singapore.

Ø Experience in quality assurance (QA) and QA document developing.

Ø Experience in site quality control (QC) related inspection and tests.

Ø Experience in defects rectifications.

Ø Strong knowledge of construction materials, techniques, and standards (BS EN, SS, ASTM).

Ø Excellent problem-solving and analytical skills.

Ø Strong communication and interpersonal skills.

Ø Certification in Quality Management (e.g., ISO 9001) is a plus.

Job Description

• Co-ordination and supervision of M&E works
• Liaise with M&E Consultants
• Ascertain and make provision for all M&E and building services in collaboration with the project staff
• Monitor progress, quality of workmanship and compliance with authority requirements.
• Highlight and advise the project staff on the interfacing of M&E services and the building works
• Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission
• Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission
• Attend to technical clarifications as and when required to address technical issues and establish method statements
• Project Management and sites supervision works.
• Able to coordinate with contractors and consultants for engineering issues and drawing plans.
• Perform all duties in accordance with company policies, processes, systems and procedures.

Job Requirements:

• Minimum 8 years of engineering experience with recognised Degree in relevant field
• At least 5 years of supervision experience of E&M work in the construction site for projects of similar scale, complexity and nature of work
• Candidate must have LTA/ MRT/ rail projects background

Job Responsibilites

• Prepare Master Program and update progress monthly.
• Prepare Progress forecast of rolling programs and update of resources.
• Resolve any instrumentation issues & recording.
• Coordinate with services department about diversion work and schedule.
• Ensure overall site progress are updated according to schedule.
• Prepare monthly progress report for client/consultants.
• Assist Project Manager in the preparation and submission of verified work done to Quantity Surveyor.
• Any other adhoc duties as assigned by management.

Job Requirements

• Possess a Degree Civil Engineering and above or equivalent.
• At least 5 years of experience in construction planning and programme coordination for railway projects.
• Computer literate with proficiency in planning software such as Microsoft Project, AutoCAD, P6 Primavera.
• Experience in LTA Projects will be advantage.
• Willing to be based at project site office and work 5.5 days

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Job Description

If you are engineering trained, independent, self motivated and good team player, come join us as a Sales & Application Engineer.

• The candidates should be engineering trained.
• He/she is to maintain good relationship with existing customers and develop new businesses for the sale of company products (e.g. pumps & spare parts).
• Knowledge of handling tender documents, technical documentation and manual would be an added advantage.
• Daily tasks includes the handling of RFQ, attending to technical queries, provide technical solutions etc.
• Travelling within the region may be required.

Requirements

• Minimum Certificate in Engineering.
• With or without relevant experience as training will be provided.
• Possess a valid class 2/3 license would be an added advantage.
• Good engineering knowledge and self-motivated.
• Able to work independently, yet a good team player with positive work attitude

Remarks : Well performed candidates may be selected for overseas training.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

The job incumbent will be responsible for supporting the R&D department in various activities, which include the following:

· Support R&D activities for new membrane product or production process improvement.

· Involve in different project-related R&D activities like wastewater treatment, desalination, drinking water treatment, etc.

· Support and perform experiments for membrane characterization and evaluation.

· Carry out qualification tests and analysis for raw materials and products.

· Maintenance and calibration for some of lab equipment.

· Literature search for product development and relevant area.

· Provide reports and updates for R&D activities.

· Other related duties assigned.

Requirements:

· Diploma/Bachelor's Degree/Post Graduate/Professional Degree in Engineering (Chemical), Chemistry or equivalent

· Familiar with handling practice of chemicals

· Independent in performing experiments

· Good team player, self-driven and meticulous

· Good communication and interpersonal skills

COMPANY DESCRIPTION

Founded in Norway in 1996, REC Group is an international pioneering solar energy company with a strong footprint in North America, Europe and Asia. We are part of Reliance Industries Limited (RIL), a Fortune Global 500 company that shares our passion for bold innovations that empower people with clean energy solutions and drive global energy transitions. A trusted partner for customers, consumers and employees, we are “Solar’s most trusted”!

RESPONSIBILITIES

Be the key driver to ensure that REC Modules deliver world class leading top quality product through well controlled process and manufacturing flow, from material supplies to product deliveries.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Be key driver to ensure improvement, qualification and implementation of new processes/products including changes and/or new product introduction, are in-line with the overall production performance enhancement targets.
• Support production line issues with appropriate and permanent corrective solution, as and when necessary.
• In plant expansion phase, work closely with process/equipment/technology and contribute to establish good product quality and specification.
• Support investment proposals and projects in order to utilize best available practice and competence.
• Support managements’ directives and projects as and when needed.
• Possessed very good ability in project management, providing key milestone, timeline and execution, overseeing the completion of project on time.

Module PD Engineer

• Candidate working in Module PD is responsible for development of the bill of materials (BOM) used in the PV module.
• Responsible for redesign of parts for cost and process improvement through alternative components, parts reduction, jigs and fixtures, and increasing yield, reducing cycle time and improving quality
• Excellent knowledge in material structure performance and provide direction of how best the appropriate materials could be introduced and change to meet the overall cost targets.

Knowledgeable in establishing, sourcing and developments of new materials, new designs and alternative vendors (such as Glass, EVA, Back Sheet, Frame, junction box, etc.) to meet the overall process, production and cost improvement targets.

• Degree in engineering disciplines (electrical, mechanical, mechatronics, material science or related discipline )
• 3 years or more experience for engineer position
• 7 years or more experience for senior engineer position
• Knowledge in product design environment.
• Knowledge of interpreting design intent for DFM and DFA
• Strong knowledge of semiconductor or Solar.
• Knowledge in Prototype PV Module design functionalities that ensure good quality and manufacturability would be an advantage
• Knowledge of product functionality of PV modules/panels would be an advantage
• Good presentation and communication skills
• Must be able to work independently and knowledgeable in project management
• Supportive in other job functions assign by superior

Nanyang Technological University’s National Centre for Research in Digital Trust (DTC) is a Trust Technology Research Centre to execute a national program to help put Singapore into a strong trust hub. The key objective is to support efforts to create a trusted digital environment for people and businesses in the digital transformation by providing businesses and consumers with greater assurance and confidence as they digitalize. For more details, please view https://www.ntu.edu.sg/dtc

We are looking for a Research Engineer to develop, implement, and oversee techniques and systems in Trust Technology and related areas such as privacy, security and blockchain, which are important components of digital trust platforms. The role will focus on emerging technologies that engenders trust and espouse the values of fairness, safety, and privacy in digital technologies.

Key Responsibilities:

• Conduct research into trust technologies testing – translating algorithms, tools, and frameworks into working prototypes that can explain how research outputs can be productised into new capabilities.
• Work closely with Centre’s researchers to design and develop system implementation work from research into the product.
• Design and build working tools that can support the technology transfer of new capabilities to research partners and can be used to showcase the value of a given research outcome.
• Write and maintain technical documentation, presentations, and papers on research into trust technologies testing, helping to educate and raise the overall competency in emerging areas of trust technologies.
• Engage global partners and researchers to understand latest trends and advance Singapore’s mindshare in this domain.

Job Requirements:

• Master’s degree in computer science/ engineering or related fields.
• Proficiency in Python is essential; experience with Java, C/C++, Go, and PyTorch/TensorFlow is a plus. Proficient with Linux (e.g., Ubuntu, CentOS) and shell scripting.
• Experience in developing and deploying machine learning models, especially in NLP and LLMs, covering tasks like data preprocessing, feature extraction, training, and evaluation.
• Strong knowledge of machine learning and deep learning techniques (e.g., knowledge graphs, machine unlearning, AI testing). Cloud platforms (AWS, GCP, Azure) and containerization (Docker, Kubernetes) experience required.
• Familiarity with Git and collaborative development tools with experience in end-to-end ML system development (data exploration, feature engineering, model training/evaluation) is advantageous.
• Solid understanding of software engineering principles and best practices and the ability to explain complex technical concepts to both technical and non-technical audiences.
• Strong analytical, problem-solving, and innovative thinking skills and a good understanding of ethical AI practices, especially related to data privacy and security.
• Self-motivated, able to work independently in a fast-paced environment with strong collaboration skills. Experience working in cross-functional teams with attention to detail and commitment to delivering high-quality results.
• Experience in research on mechanistic interpretability.
• Experience in the implementation of multi-modal LLMs or vision-language models.

We regret to inform that only shortlisted candidates will be notified.

Mandatory Skills

Job Description:

The suitable candidate will join a team of engineers and operations specialists in the support of DBS’ enterprise privileged access management infrastructure and operations. He/She will be responsible for the end to end design, deployment, operations and development of the bank’s privileged access management framework, infrastructure and processes.

Key responsibilities

• Drive the automation and integration of privileged access management infrastructure to other systems to achieve straight through processing and reduce manual work.
• Provide on-going operations support including management reporting and operations dashboards relating to the governance oversight of privileged accounts and passwords.

Requirements

• 5+ Years of CyberArk Experience: Demonstrated expertise in the deployment, configuration, management, and support of CyberArk infrastructure components. Proven ability to provide regional support and integrate CyberArk solutions via APIs. CyberArk certifications are preferred to validate knowledge and skills.
• Scripting and Reporting: Proficient in writing PowerShell scripts and SQL statements to develop comprehensive management reports focused on the usage and operational management of privileged accounts. This includes automating reporting processes and ensuring accurate data presentation for stakeholders.
• Data Visualization: Experienced with Grafana for creating data visualizations and dashboards, enabling real-time insights into access management and security posture. Skilled at translating complex data sets into understandable visual formats for better decision-making.
• Privileged Access Management: Strong understanding of enterprise privileged access management principles, encompassing risk management, compliance, governance, and control. Ability to develop and enforce policies that mitigate risks associated with privileged access.
• Audit Experience: Extensive experience in responding to audit queries and preparing detailed reports related to access management. Skilled in analyzing audit findings and implementing corrective actions to address compliance gaps. Proven ability to collaborate with internal and external auditors to ensure all necessary documentation is accurate and readily available.
• Remediation Expertise: Extensive experience in remediating CyberArk failed objects to ensure that auto-managed objects comply with security policies and standards. This includes troubleshooting and resolving issues to maintain operational integrity and compliance.
• Technical Platform Knowledge: In-depth knowledge of key operating systems and databases, including Windows, Unix, MSSQL, and MariaDB. Previous experience in administering these platforms enhances ability to manage and secure privileged accounts effectively.
• Banking Environment Experience: Familiarity with working in a banking or financial services environment, understanding the unique regulatory and security requirements involved. This background supports effective implementation of access management solutions tailored to industry standards.
• Educational Background: Bachelor’s degree in Computer Science, Information Systems, or Engineering (or a related field). Alternatively, a combination of relevant professional experience and CyberArk certifications is also acceptable, demonstrating a solid foundation in security practices.

General Description

• Responsible as Operation’s facility engineer for the development of Terminal’s new LNG Trucking facility. Incumbent shall support the Project team, ensure the Operability & Maintainability aspects of the new facility are taken care during engineering, design and construction phases. Incumbent shall also develop and execute “Ready to Operate” plans for the facility;
• Incumbent shall work closely as a team with Production Shift Teams, Maintenance Team and other Process Engineers providing process engineering expertise ensuring the Terminal and Trucking facilities operates safely, reliably and efficiently;
• Incumbent shall liaise closely with Commercial team to ensure the Terminal delivers the required services, inclusive of Jetty Operations, Gas supply and Trucking are incompliance to regulations, procedures and contractual agreements

Roles & Responsibilities

The incumbent roles include but not limited to following scope of tasks and duties:

• Evaluate operations activities, make recommendations and execute continuous process improvements in the areas of operational excellence;
• Recruit, train and supervise the Trucking Technicians assigned for operating the Trucking Facility.
• Lead troubleshooting, inspections, reviews and investigations of equipment or process system to support optimisation, drive root cause analysis and formulate remedial resolution. Incumbent shall also investigate Customer’s complaints related to equipment and process systems;
• Review the adequacy of standard operating procedures(SOP) to ensure safe and reliable operations with operational design limitations, includes commissioning, operations and maintenance phases of facilities;
• Provide specific instructions to Production Shift Teams, Maintenance Team, Trucking Team and Laboratory on LNG transfer operations, trucking, stowage plans and samplings requirements;
• Liaise with stakeholders in ensuring LNG surveyor’s reports, certificates of quality are accurate and consistent as per the procedures;
• Diligently review maintenance plans, method statements and risk assessment on the process safety aspects for the maintenance work related to the assigned equipment and systems;
• Compile data and measure Terminal’s performance including service availability and efficiency;
• Undertake alarm management for assigned area and proactively drive alarms analysis to ensure robust operations;
• Take lead role for Management of Change(MOC) for facilities modification, as required;
• Participate in reviews and evaluations such as HAZID, HAZOP, FMEA, SPF, 3D models, Safety Integrity Level, RAM analysis, design layout and process safety requirement in alignment with regulatory and business objectives;
• Report HSSE near miss/violation. Take an active role in HSSE activities and green initiatives;
• Assigned specific role and responsibility in emergency response;

Work Experience

• Minimum of eight (8) years work experience in process engineering function in an oil, gas and petrochemical facilities, complex utility, cryogenic or trucking facilities;
• Conversant with local/international codes, regulations, standards, best practices, equipment inspection and schedule requirements;
• Knowledge of installation, commissioning, start-up, maintenance and troubleshooting of processes system in oil, gas or petrochemical industry;
• Knowledge of Process Safety Management, Electrical, Instrumentation, Controls or Mechanical systems;
• Experience in Process Simulation (e.g. Hysys/Unisim or equivalent), Design Softwares(e.g. Fisher Specification Manager, Hydraulics, PSV sizing) or other related process software an advantage;
• Experience in Engineering design analysis including preliminary design development, heat and mass balance calculation, technology evaluation and equipment selection preferred;
• Experience in dealing with consultants and contractors involved in the Oil & Gas sector, including external agencies, utilities and government organizations;
• Basic knowledge of ship-shore interface and cryogenic transfer operations an advantage;
• Capable of lead and guide technicians ensuring the works are executed safely and effectively;

Education

• Incumbent must possess a Degree in Chemical Engineering from a recognised university.
• Process Engineering background with Mechanical and Instruments knowledge.

Primary Purpose

Functions as a technical specialist in water / wastewater treatment process. Performs all aspects of conventional design engineering and analysis independently. Broadens knowledge and skill set in area of discipline. Knowledge in other disciplines and/or functional areas.

Roles & Responsibilities

• Detailed design of process systems for water and wastewater treatment plants, including screening equipment, physical-chemical treatment plants, biological treatment plants, blower equipment, odour control plants, disinfection plants, sludge treatment plants, desalination process, etc.
• Detailed design of ancillary systems including chemical feed systems, mechanical ventilation systems, and drainage systems.
• Preparation of Process Flow Diagrams and P&IDs.
• General Arrangement and equipment layout drawings.
• Preparation of process equipment specifications.
• Review and evaluation of vendor submissions.
• Coordination with other disciplines e.g. civil, structural, electrical, mechanical, building services, instrumentation & control designers and digital water specialists.
• Able to lead meetings, HAZOP, discussions with clients, contractors and vendors.
• Provide engineering support for bids & proposals.
• Prepare testing and commissioning plans
• Process Testing & Commissioning
• Keeping abreast with latest development in water treatment technology and suitably applies in the design

Candidate shall have minimum of 12 years’ experience in the process design of water / wastewater treatment (municipal and industrial) with the following attributes:

1. Degree in Chemical or Environmental Engineering.
2. Expertise in water / wastewater treatment process modeling and optimization (including biological treatment).
3. Proficient in BioWin/GPS-X/SUMO or other wastewater modelling software.
4. Possess knowledge of wastewater treatment processes such as Activated Sludge, SBR, MBR & MBBR/IFAS.
5. Experience in preparing PFDs/P&IDs and specifications for procurement of water and wastewater process equipment.
6. Proven ability to manage diverse and large scale water projects, prioritize tasks, effectively.
7. Utilize available resources and ensure timely completion of projects.
   Proficient in written and oral communication with good interpersonal skills.

Position Overview:

You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

1. Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog

2. Experience in ARM, RISC processor system

3. Experience in embedded C and assembly code programming

4. Experience in analysis of power, timing and area

5. Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)

6. Disciplined, quality-minded, and highly driven for excellence

7. Excellent team player and good communication skills

8. MSEE/BSEE in Electrical Engineering or Computer Engineering

9. Candidates with relevant experiences would be offered as Staff, taking on higher responsibilities

10. Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus

11. Experience in system modelling and simulation using emulator and SystemC is a plus

12. Passionate and strong in general programming is a plus

MacGregor shapes the offshore and marine industries by offering world-leading engineering solutions and services with a strong portfolio of MacGregor, Hatlapa, Porsgrunn, Pusnes and Triplex brands. Shipbuilders, owners and operators are able to optimise the lifetime profitability, safety, reliability and environmental sustainability of their operations by working in close cooperation with us.

Purpose of the position

As a Service Engineer with expertise in steel work, you will be responsible for supervising the structural steel repairs, including welding, fabrication, and modifications on Roll-on/Roll-off (RoRo) vessels and hatch covers on container vessels and bulk carriers. You will ensure that all steelwork adheres to industry standards and vessel safety regulations, while leading a team of engineers and subcontractors.

This role requires in-depth knowledge of steel structures and the

capability to manage projects efficiently and safely, ensuring high-quality service for MacGregor and third-party products when necessary

Main tasks and responsibilities

• Steel Work Supervision: Supervise structural steel repairs, including welding, fabrication, and modifications on RoRo vessels, container vessels, and bulk carriers, ensuring compliance with industry and safety standards.
• Maintenance: Perform preventative maintenance, corrective actions, and upgrades on MacGregor equipment, including RoRo ramps, doors, and hatches.
• Inspections: Conduct thorough inspections of steel structures and mechanical systems to ensure compliance with safety and quality standards.
• Project Management: Lead and manage subcontractors during larger steel repair projects, ensuring the work is completed on time and within budget.
• Customer Support: Establish and maintain excellent relationships with internal and external customers, providing technical support and feedback to the relevant teams.
• Safety Compliance: Adhere to all Quality, Health, Safety,and Environmental (QHSE) standards and site-specific safety protocols.

What you’ll need to succeed

Education:

• Diploma in Marine Engineering or an equivalent technical qualification in mechanical, marine, or steel fabrication fields.
• Engineering graduates are encouraged to apply.

Experience:

• Minimum of 5 years’ experience in supervising steelwork, particularly with RoRo/Hatch Cover systems or in marine environments.
• Strong background in mechanical, hydraulic, and steel structures is essential.
• Experience working in ports,onboard ships, and offshore environments is preferred

Skills & Competencies:

• Proficient in welding and steel fabrication techniques, with supervisory
• experience.
• Strong problem-solving abilities and the capability to lead teams and manage projects independently.
• Fluent in English; multilingual skills are an asset.
• Ability to perform under pressure and adapt to changing circumstances.

You will be part of

We offer you an opportunity to put your skills and experience into work and make an impact in our global organisation and the marine industry. You will work together with great colleagues from various backgrounds inspired by shared, ambitious goals. We value collaboration in our open and inclusive culture. With us, you will have the opportunity to develop yourself professionally. Join us to make a difference - and have fun while doing it.

Mandatory Skills

Job Description:

The suitable candidate will join a team of engineers and operations specialists in the support of DBS’ enterprise privileged access management infrastructure and operations. He/She will be responsible for the end to end design, deployment, operations and development of the bank’s privileged access management framework, infrastructure and processes.

Key responsibilities

• Drive the automation and integration of privileged access management infrastructure to other systems to achieve straight through processing and reduce manual work.
• Provide on-going operations support including management reporting and operations dashboards relating to the governance oversight of privileged accounts and passwords.

Requirements

• 5+ Years of CyberArk Experience: Demonstrated expertise in the deployment, configuration, management, and support of CyberArk infrastructure components. Proven ability to provide regional support and integrate CyberArk solutions via APIs. CyberArk certifications are preferred to validate knowledge and skills.
• Scripting and Reporting: Proficient in writing PowerShell scripts and SQL statements to develop comprehensive management reports focused on the usage and operational management of privileged accounts. This includes automating reporting processes and ensuring accurate data presentation for stakeholders.
• Data Visualization: Experienced with Grafana for creating data visualizations and dashboards, enabling real-time insights into access management and security posture. Skilled at translating complex data sets into understandable visual formats for better decision-making.
• Privileged Access Management: Strong understanding of enterprise privileged access management principles, encompassing risk management, compliance, governance, and control. Ability to develop and enforce policies that mitigate risks associated with privileged access.
• Audit Experience: Extensive experience in responding to audit queries and preparing detailed reports related to access management. Skilled in analyzing audit findings and implementing corrective actions to address compliance gaps. Proven ability to collaborate with internal and external auditors to ensure all necessary documentation is accurate and readily available.
• Remediation Expertise: Extensive experience in remediating CyberArk failed objects to ensure that auto-managed objects comply with security policies and standards. This includes troubleshooting and resolving issues to maintain operational integrity and compliance.
• Technical Platform Knowledge: In-depth knowledge of key operating systems and databases, including Windows, Unix, MSSQL, and MariaDB. Previous experience in administering these platforms enhances ability to manage and secure privileged accounts effectively.
• Banking Environment Experience: Familiarity with working in a banking or financial services environment, understanding the unique regulatory and security requirements involved. This background supports effective implementation of access management solutions tailored to industry standards.
• Educational Background: Bachelor’s degree in Computer Science, Information Systems, or Engineering (or a related field). Alternatively, a combination of relevant professional experience and CyberArk certifications is also acceptable, demonstrating a solid foundation in security practices.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Responsible for the design, implementation and monitoring of all electrical related works at site
• Detailed design of all Electrical related works
• Interpret tender drawings and studies the contract documents and applicable standards or specifications prior to design of the Electrical works
• Manage directly and provide engineering and technical supports to all the electrical work groups at site
• Coordinates with Client / Consultant’s representatives for any site instructions and inspection of works
• Support the Construction Manager in accomplishing all the goals and targets for the electrical groups at site
• Ensure that all the works done are in accordance with the approved construction drawings, contract documents, project specifications, and all applicable standards whether local, national or international standards
• Ensure that all site works are done according to all applicable quality standards
• Directly responsible for the safety of all electrical group personnel of the project by ensuring that the project execution will be done according to all applicable health, safety, sanitary and environmental standards.

Technical

• Design, integration & coordination, installation & commissioning of mechanical systems and services required for the project
• Liaise with Construction/Installation Manager to ensure job is on schedule on Site.
• Liaise with Client on all technical aspects of the project.
• Provides engineering advice for the Construction/Installation Team.
• Attend meetings with client on all disciplines of the work (i.e. 1 etc.) as required.
• Prepares with the Quality Manager all Inspection and Test Plans and associated Project Specific Procedures.
• Ensure that the quality requirements of the client are adhered to and that company procedures are followed.
• Coordination & integration of the design with other engineering design disciplines & services
• Ensure project timetabling requirements are met
• Development / production of inspection & test and operating & maintenance manual documentation.
• Ensure local regulatory and OHS requirements are maintained
• Ensure that the surveys of installations throughout the project are conducted in a professional manner with all results being reviewed and accepted by UGL. All actions resulting from these surveys are coordinated by the Engineer until completion.
• Provide written reports on engineering activities as required by the Project Manager.
• Mentor Engineering Graduates and Engineering Vacation Students (Engineering Assistant)
• Maintain documentation and registers
• Provide monthly reporting data to the Engineering Manager as required

QUALIFICATIONS, SKILLS & EXPERIENCE REQUIRED

• Minimum 5 years’ experience as an Electrical Engineer within a similar industry.
• Degree in Electrical Engineering with more than 5 years’ experience in basic design requirements, fabrication, installation, T&C and all site activities related to all electrical works.
• Familiar with all electrical engineering methodologies as well as the corresponding equipment, materials, consumables and tool allocations related to electrical works.
• Ability to work as part of a close-knit management team and manage numerous activities / projects simultaneously – both short and long term.
• Ability to work on own initiative and with the minimum of supervision
• Outgoing personality essential for dealing directly with Clients and their design team
• Demonstrated ability to work independently to organize and prioritize demands, handlemultiple complex tasks simultaneously, set and meet deadlines and follow-through within a fast-paced environment with multiple and competing demand

Science Centre Singapore is dedicated to the promotion of interest, learning and creativity in science & technology through imaginative and enjoyable experiences, and to contribute to the nation's development of its human resource.

Join the Exhibitions team and create memorable experience as an Assistant Experience Engineer.

Essential Job Functions

As an Assistant Experience Engineer, you play a pivotal role in developing exhibits and experience, ensuring they operate at the highest level for the enjoyable experience for our guests.

Your responsibilities include the following:

- Exhibit checks, reporting, troubleshooting and maintenance of exhibits/exhibitions

- Carry out periodic image back-ups of our exhibits, maintaining the exhibition network and administration of the team’s knowledge management database (storage FTP server)

- Set-up and takedown of Exhibitions

- Exhibit Ideation and Prototyping

- Work on Exhibit Specifications (including providing technical advice for development projects)

Requirements

Knowledge and work experience in the following areas will be an advantage.

Diploma in Industrial Design/Product Design:

· Machining, mechanical assembly works, electrical and electronic systems, digital prototyping using CAD (computer-aided Design) software.

· Rapid prototyping, addictive and subtractive fabrication of spare parts and components for exhibits, exhibit housing and experiences.

· Operating woodworking machines such as, the bench saw, planer, routers and stand drill.

· Wood/plastics fabrication works

OR

Diploma in Information Technology or equivalent:

· Familiarity with troubleshooting basic computer hardware faults, diagnose software issues within an exhibit and resolve them

Other Skills/Abilities

Having a strong interest in taking apart or fixing things, coupled with the ability to handle basic equipment and tools useful in carrying out the duties within the galleries.

We value qualities such as professionalism, initiative, and quality service in all aspects of interaction with both internal and external customers, collaborative and enthusiastic about learning and acquiring new skills.

Shift Requirements

Rotating 5-day work shifts is a requirement, while duties on weekends and public holidays will be scheduled as and when required.

Only shortlisted candidates will be notified.

Brief Summary

• Basic $8000 + AWS + VB + Medical benefits
• 5 Days : 8.30am-5.30pm
• Working Location @ West
• AL 14 Days, Birthday Leave, Annual health check-up, Customized Gift for holiday season
• Oversea training in Shanghai

Responsibilities

• Defining test plans, analyzing device performance, and contributing to the development of next-generation products.
• Define design verification test plans, analyze device performance, and provide feedback for design improvements.
• Perform detailed characterization of active and passive integrated photonic devices at the chip-level and wafer-level.
• Develop software for data post-processing.
• Participate in R&D projects for the development of next-generation products.
• Hands-on experience in characterizing active and passive integrated photonic devices, including various optical-optical (OO), electro-optical (EO), and optoelectronic (OE) measurements at DC and AC levels.
• Expertise in optical alignment and electrical probing procedures.
• Experience in test setup development, maintenance, and equipment resourcing.

Requirements:

• Min 5 year relevant experience
• Proficiency in handling mechanical, electronic, or automated equipment.
• Singaporean only

For consideration, kindly submit your CV by clicking “APPLY Now” or email to [email protected]

**Only shortlisted candidate would be notified**


EA Reg. No: R1988238 | Erlynn Tay Kim Geok

In this role, you will have the unique opportunity to engage in field service, site installation, and perform Quality check on all completed machines.

Job Responsibilities:

• Provide site machine installation and maintenance.

• Attend to service call.

• To conduct in-house and on-site training for customer.

• Investigate and handle customer's complaints.

• Quality check on all completed machines to ensure stringent quality compliance before delivery to customer.

Requirements:

• Diploma in Electrical or Mechatronics Engineering

• Minimum 2 years of field service or QA experience in Industrial Automation projects

• Ability to build strong relationships, work with customers to solve problems

• Good team player with excellent interpersonal and communication skills.

• Meticulous, Quality conscious and Problem solving/troubleshooting skills.

Job Description

We are looking for multiple seasoned Senior and Staff Software Engineers to grow an Edge AI & Systems software team to the next level. This team works within the larger ASIC team to architect and enhance Neural Network solutions in the Video Processor roadmap including these current and older products:

• https://www.ovt.com/products/oax8000/
• https://www.ovt.com/products/oax4600/
• https://www.ovt.com/products/oa7100/

Deliveries:

• Neural Network Inference libraries, drivers and sample applications
• Boot ROM, RTOS/OS BSP and platform SDKs and sample application
• SoC IP programming models

Responsibilities:

• Develop various features of deliverables
• Solution profiling, optimization and benchmarking
• Support internal developers directly and customers through FAEs
• Ensure compliance as required e.g.ASPICE, MISRA C, Coverity, BlackDuck
• System architecture, verification and validation of ASIC IPs
• Constantly improve productivity through automation in all areas

Skills:

• Strong ANSI C design, implementation, optimization and debugging using GCC-like toolchains
• Good communication, collaboration, task estimation & reporting, CI/CD via tools such as Confluence, Git, JIRA etc
• Familiarity with
• Python for prototyping, demo, verification and/or automation
• OS: GNU/Linux, proprietary RTOS, Bare metal
• Processor architectures: ARM/RISC-V symmetric multiprocessing with cache & internal buses, SIMD, Vector Processing
• Debugging tools: gdb, simulators, emulators, JTAG, Oscilloscope, Logic Analyzers

Any of the following will be advantageous:

• Detailed and comprehensive understanding of TinyML (e.g. TensorFlow Lite for MCUs), from training, quantization through to operator execution, optimizing for power, performance, and size.
• FPGA and hardware interfacing and debugging

Requirements:

1. Ph.D/MSEE/BSEE in Electrical Engineering, Computer Science or Computer Engineering
2. At least 5 years of commercial embedded development experience.