Responsibilities

1. Develop design requirements of an NPU given system level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 8+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on in digital design experience is a must.
4. Preferably has lead a team of at least 3 to 4 people in the past at the capacity of a design lead.
5. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
6. Experience in synthesis, with analysis of power, timing and area.
7. Disciplined, quality-minded, and highly driven for excellence.
8. Excellent team player and good communication skills.
9. MSEE/BSEE in Electrical Engineering or Computer Engineering.
10. Understanding of convolution operator and number system is required.
11. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
12. Experience in UVM verification methodology is a plus.
13. A plus to have SoC design experience.
14. Experience with optimizing micro-architectures for low-power and low-area is a plus.
15. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
16. Experience with past design experience with NPU / GPU / DSP design is a plus.
17. Experience with ARM or RISC-V processor systems is a plus.
18. Passionate and strong in general programming is a plus.

We are looking for multiple seasoned Senior and Staff System Engineers to grow an Edge AI & Systems software team to the next level. This team works within the larger ASIC team to architect and enhance Neural Network solutions in the Video Processor roadmap including these current and older products:

• https://www.ovt.com/products/oax8000/
• https://www.ovt.com/products/oax4600/
• https://www.ovt.com/products/oa7100/

Deliveries:

• Neural Network Processor (NPU) architecture, programming Model, simulation, verification, profiling and optimization
• Specification, review and verification of other IP blocks
• FPGA images and IO boards for pre-silicon verification and design exploration
• Boot ROM, bare metal BSPs, sample applications

Responsibilities:

• Support Inference Engine, Toolchain and ASIC teams on NPU
• Constantly improve productivity through automation in all areas

Skills:

• Strong ANSI C bare-metal design, implementation, optimization and debugging using GCC-like toolchains
• Strong processor architecture knowledge: ARM/RISC-V ISA, symmetric multiprocessing, cache architecture, SIMD, Vector Processing, custom instructions
• Strong software, hardware and FPGA debugging capability
• Good communication, collaboration, task estimation & reporting, CI/CD via tools such as Confluence, Git, JIRA etc
• Familiarity with

o Python for prototyping, demo, verification and/or automation

o OS: GNU/Linux, proprietary RTOS, Bare metal

The following will be advantageous:

• Detailed and comprehensive understanding of TinyML (e.g. TensorFlow Lite for MCUs), from training, quantization through to operator execution, optimizing for power, performance, and size.

Requirements:

1. Ph.D/MSEE/BSEE in Electrical Engineering, Computer Science or Computer Engineering
2. At least 5 years of commercial embedded system architecture and development experience.

The Air Traffic Management Research Institute (ATMRI) is the first institute in Singapore to be entirely dedicated to Air Traffic Management research. As part of its agenda for innovation, it is seeking to recruit a Research Engineer to work on the AI-Assisted ATFM project, to deliver an operationally ready prototype of an AI enabled ATFM system. This job will be responsible for contributing to the research transition into development, by documenting existing AI tools, including those designed by ATMRI researchers, and integrate them into operational software development.

Key Responsibilities:

• Interpret research papers and program, for conversion into applicable software development. Develop a vision for transforming research papers into technologies ready for deployment.
• Design and develop the front and backend of the applied research, for operational use. Work closely with the researchers and stakeholders to design a user-centric, ready for development software that emphasizes the benefits for end-users.
• Rigorously document every aspect of the software development, for integration into industrial development.
• Participate in meetings and workshops with fellow researchers and stakeholder partners to discuss the future directions for research and development.

Job Requirements:

• Bachelor / Master of Engineering in Computer Science or a related field.
• Impeccable English writing and communication skills
• 1+ year experience in industrial software development
• Experience in the development of APIs, UI, authentication and actualization systems, with proficiency in several programming languages (Python, Java, C++…)
• Industrial or operational prior experience in air traffic services is a plus.

We regret that only shortlisted candidates will be notified.

Job Description & Requirements

Responsiblities :

1. At least 2 years IT Service Desk experience or,

2. At least 1 year in IT Remote Support experience or,

3. At least 1 year IT Onsite/Desktop Support Experience

• Perform troubleshooting for client platform related problems
• Support Windows OS, office software, and other Desktop Related Software & Hardware Respond promptly to incident,
• investigate & provide temporary &/or permanent resolution of incidents escalated
• Liaise with support vendors for maintenance, support or issues resolution
• Monitor the agreed service level, document & maintain the configuration of the systems Involve in client platform implementation/upgrade project
• Any ad-hoc duties assigned / required.

Job Description & Requirements

1. At least 2 years IT Service Desk experience or,

2. At least 1 year in IT Remote Support experience or,

3. At least 1 year IT Onsite/Desktop Support Experience

• Perform troubleshooting for client platform related problems
• Support Windows OS, office software, and other Desktop Related Software & Hardware Respond promptly to incident,
• investigate & provide temporary &/or permanent resolution of incidents escalated
• Liaise with support vendors for maintenance, support or issues resolution
• Monitor the agreed service level, document & maintain the configuration of the systems Involve in client platform implementation/upgrade project
• Any ad-hoc duties assigned / required.

• Tuas Naval Base
• Up to $4000 + Bonus (salary based on experience)
• Direct Contract
• Training Provided

Responsibilities:

• Work on delicate Radar System for preventive and corrective maintenance on sites.
• Execute maintenance tasks within the committed TAT, Ops availability and good quality
• Liaise with customer for maintenance activities
• Perform maintenance activities and ensure tasks are performed accordingly to requirements
• Monitor and activate replenishment of consumables at reorder level
• Schedule and perform calibration of tools and equipment
• Provide inputs and prepare documentation required to complete job
• Manage inventory of authority furnished spares
• Perform housekeeping
• Response to customers’ requirements

Location: Tuas Naval Base

Working Hours: Mon – Fri, Normal Office Hours (Standby Required)

Salary Range: $3,000 - $4,000 + Bonus

Requirements:

• Min Nitec in Engineering in Electronics or equivalent
• Knowledge of EO/Radar maintenance experience would be advantageous
• Able to perform 24/7 stand by
• Physically fit and able to lift heavy loads
• Able to work at height and do not have height phobia
• Good team player and yet able to work independently.
• Valid Class 3 driving license would be advantageous.

If you are interested, please submit your application here.

Thank you for your application and we regret that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to P-Serv Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.p-serv.com.sg/priv.... You acknowledge that you have read, understood, and agree with the Privacy Policy.

P-Serv Pte Ltd

EA License No: 90C3494

Uma Maheswari | EA Personnel: R2092012

You may also reach me at 81278347 for further information.

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Conduct feasibility studies, develop design specifications, and support design proposals.
• Create conceptual and detailed designs for automation equipment, including material handling and process automation.
• Produce detailed CAD drawings using Autodesk Inventor or similar software, and release comprehensive design documentation.
• Work with the manufacturing team on Design for Manufacturing (DFM), assembly processes and qualification procedures.
• Assemble, test and qualify prototypes, troubleshooting as necessary to ensure project timelines and budgets are met.

Requirements

• Experienced in designing industrial automation using Autodesk Inventor, with expertise in pneumatics, motion components, DFM, DFA, and GD&T.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

• Perform first level troubleshooting on all reported incidents and escalate incidents to 2nd level resolver groups as per work instructions
• Provide First Call Resolution (FCR) technical support
• Troubleshoot and investigate cause of user’s problem
• Update work information with all troubleshooting steps used in the ticketing system
• Set Incident to “Resolved” if User’s problem has been solved
• Reassign ticket if agent is unable to resolve ticket

Quantity Surveyor

• Secure new contracts / projects, administer all project contracts
• Prepare tender and contract documents including bills of quantities;
• Undertake costs analysis for all project trade works;
• Establish client’s requirements and undertake feasibility studies with project team, perform value management and cost control;
• Execute procurement strategy and propose refinements / improvements;
• Identify, analyze and develop responses to commercial risks;
• Prepare and analyze costing for tenders;
• Analyze tender outcome and prepare detailed reports for review;
• Allocate work to subcontractors;
• Evaluate completed work and arrange payments;
• Monitor Gebiz, SESAMi, newspaper notices and other platforms for private and public tender and quotations;
• Maintain awareness of the current building contracts;
• Ensure compliance with relevant ISO and company standards or objectives;
• Keep abreast of relevant regulations such as Security of Payment Act (SOP), etc.

Project Engineer

• Coordinate with clients / main contractor, architect, consultants, suppliers and subcontractors;
• Conduct preliminary surveys of the construction site;
• Responsible for submission of technical drawings, work schedules and samples for clients / main contractor's approval;
• Undertake structural analysis, calculations and prepare design sketches and drawings indicating arrangement and design intent for a variety of building structures;
• Review and check shop drawings and built drawings;
• Attend site meetings with owners / subcontractors;
• Responsible for overall aspects of the management of subcontractors;
• Plan, work, schedule and delivery of equipment and materials to site;
• Responsible for monthly progress claims and project costing;
• Raise material requisition for local material ordering
• Ensure that all formalities such as permits and clearances are obtained from respective government agencies;
• Work closely with Consultants, Regulatory Authorities and Contractors, to provide planning, design and supervision to solve site matters and timely completion of the projects;
• Take part in the project plan and give inputs regarding implementation;
• Coordinate and manage Sub-contractors and Supervisors on site to ensure all works comply fully with regulatory and Client’s requirements;
• Update progress of construction work to Project / Site Manager
• Keep in touch with designers, architects, consultants and suppliers to ensure that construction is on schedule;
• Ensure implementation and sustaining of construction quality and safety programme;
• Prepare Method Statement, Risk Assessment and Safe Work Procedure;
• Process suppliers and sub-contractors (progress) claims;
• Ensure compliance with time and money constraints or budgets for projects; with relevant QMS, OHSAS, EMS and company standards and policies.

JOB REQUIREMENTS:

• Preferably Degree in Quantity Surveying or Engineering (Civil / Structural / Construction)
• Process relevant skills in MS Office, AutoCad, Microsoft Project
• At least 3 years working experience in the related field preferably min. 2 years experience in Building Construction specializing in Quantity Surveying or Engineering in Civil / Construction / Structural
• Good communication skills in both oral and written English and has the ability to liaise effectively with other professionals, e.g. clients / developers, main contractors, construction managers, quantity surveyors, subcontractors, architects, designers, other engineers, consultants, suppliers, etc.
• Possess excellent negotiation and coordination skills and able to work in fast paced environment

Kindly indicate the following information in your CV.

• Current / Last Drawn Salary (in SGD)
• Expected Salary (in SGD)
• Availability
• Residency Status in Singapore

We regret only shortlisted candidates will be notified.

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Deploy, administer, and support database and data lake infrastructures.
• Formulate and execute plans for high availability, backup, recovery, and disaster preparedness.
• Diagnose and resolve database issues and optimize performance.
• Enforce industry-standard security measures, policies, and best practices.
• Enhance clients' data warehouses and data lakes, and maintain comprehensive documentation.

Requirements

• Proficiency in Database Administration.
• Experience with Linux operating systems and scripting.
• Practical experience with at least one of the following: Hadoop Distributions, Relational Databases, or NoSQL Databases.
• Advantageous knowledge in one or more of the following areas: Data Virtualization tools, Scripting languages, Cloud platforms, and Docker/Kubernetes environments.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Deliver project milestones, install hardware/software, and troubleshoot issues during implementation.
• Draft and execute Statements of Work (SOW), coordinating issue resolution with external parties.
• Participate in System Acceptance Tests, collaborating with vendors and customers.
• Create and update technical documentation, emphasizing clear network topologies.
• Produce SOW, system handover documents, and maintain inventory records.

Requirements

• Proficient in Linux operating systems.
• Well-versed in Networking, Firewall, and Fiber-Optic transmission devices.
• Acquainted with Big Data technologies; preferred background in implementation and system maintenance.
• Advantageous experience in Virtualization.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Set and advance sustainability targets, balancing financial and environmental goals.
• Implement effective reporting systems; collaborate on performance benchmarks.
• Lead sustainability communications; create educational materials.
• Formalize sustainability practices through documentation and reviews.
• Monitor and report on sustainability metrics; conduct audits.

Requirements

• Experience in a related field preferred.
• Knowledged of BCA Green Mark for Data Centre and Buildings, ISO 14001 Environment Management System, SS564 Green Data Centre etc

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Are you passionate about ensuring the highest quality in software services? We are seeking a Software Quality Engineer (QE) to join our team responsible for developing and maintaining disbursement system . As a QE, you will play a critical role in ensuring that our services are reliable, secure, and meet the needs of our users.

What to Expect:

• Test Planning & Maintenance: Create and maintain test cases and plans, ensuring they reflect the latest requirements and policy changes.
• Automation & Framework Development: Build, maintain, and improve automated testing frameworks and environments to enhance testing efficiency.
• Hands-on Testing: Conduct various forms of testing such as manual, functional, performance, and exploratory tests, and file defects when necessary.
• User Acceptance Testing (UAT): Support UAT activities, ensuring the system functions as expected before release.
• Production Support: Assist in resolving production cases to maintain high-quality operational systems.
• Agile Collaboration: Actively participate in all agile ceremonies, including stand-ups, sprint planning, and retrospectives.

Requirements:

• Educational Background: A degree in software engineering, computer engineering, electrical engineering, or an infocomm-related discipline.
• Testing Experience: At least 3 years of professional software quality testing experience with hands-on automation experience.
• Technical Skills:Strong understanding of testing techniques, test-driven development, and continuous integration/delivery.
  Experience with Java and Spring Boot frameworks is a plus.
  Familiarity with automated testing frameworks (Selenium, Cucumber, JUnit) or enterprise tools (HP UFT, QC, Mobile Center).
  Experience with performance testing tools like JMeter, Gatling, or enterprise tools such as HP LoadRunner.
  Knowledge of penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise-level tools (WebInspect, Nessus, CheckMarx).
• Agile Experience: Working experience in Agile environments is highly preferred.
• Soft Skills: Excellent verbal communication and listening skills, coupled with a proactive, self-driven, and motivated attitude.

Why Join Us?

• Be part of a team improving the quality of essential public services in Singapore.
• Work in an Agile environment that values continuous improvement and innovation.
• Enhance your skills in test automation, security, and performance testing using cutting-edge tools

Responsibilities:

1. Project and Maintenance Support:
   • Participate in projects and maintenance services involving CCTV systems, access control systems, public address systems, alarm systems, and server/network infrastructure.
   • Provide technical assistance and support as required.
2. System Installation and Configuration:
   • Install, implement, configure, and test system/storage equipment and related setups.
   • Set up and integrate access control systems, including electronic locks, card readers, biometric scanners, and control panels.
3. Preventive Maintenance and Inspections:
   • Conduct routine inspections of access control systems.
   • Perform preventive maintenance to ensure optimal system performance and reliability.

Requirements:

• Proficiency in installing and configuring electronic security systems.
• Strong understanding of server and network infrastructure.
• Excellent troubleshooting and problem-solving skills.
• Ability to work independently and in a team-oriented environment.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

• Evaluate design package and prepare shop drawing of RC structural works and temporary works.
• Liaise structural design works with design-relevant counter parties and construction team.
• Design of temporary works related to structural design.
• Lead the project department in solving design related matters.
• Manage production, quality, design & engineering and schedule issue.

Requirements:

• Degree in Civil Engineering or equivalent
• At least 5 years of civil & structural works experience in Infrastructure/LTA Projects.
• Proficient in STADD, AutoCAD, MicroStation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Perform pre- and post-sales technical support to customers.
• Provide support to the sales staff in technical presentations.
• Evaluate and establish a vision system performance specification.

Requirements:

• Diploma in any Engineering field
• At least 2 years of experience in field servicing and semiconductor industry.
• Able to troubleshoot electronics hardware system, PC hardware, OS and networking.
• Good understanding in Die Sorter or Wafer Sorter

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Roles & Responsibilities:

• Assist Project Manager with coordinating, planning, and forecasting to optimize utilization of resources to fulfil budgetary and project milestones
• Perform site study for PV system recommendation
• Manage solar project site team to ensure compliance with safety standards.
• Monitor site work progress to ensure projects conform to specifications, schedules, and budgets
• Plan and prepare Bill of Materials (BOM) for projects.
• Coordination with procurement team to raise sales request and ensure timely delivery of materials
• Create checklists for review or inspection of solar projects.
• Assist in Investigation and troubleshooting of M&E issues during and post project implementation in coordination with clients, contractors, other stakeholders
• Assist LEW with site testing and inspection of installation.
• Assist Design and draft electrical single-line diagram (SLD), solar module layout and string-connection drawings for using AUTOCAD software.
• Assist Design and draft mechanical drawing of solar PV systems
• Prepare project documents for submission to authority and ensure smooth delivery of the project completion
• Assist with ad-hoc duties as assigned

Job Requirements:

• Diploma in Mechanical or Electrical Engineering or other related discipline preferred
• Knowledge in AutoCAD, Solidworks, and other modelling software (like sketchup, PVsyst, Helioscope) is an advantage.
• Ability to work independently and handle multiple projects concurrently
• Prefer to possess Class 3 driving license (Manual)
• Detailed Oriented

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Ding Xin Er

EA Personnel Reg No: R22106669

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Responsibilities:

• Lead Analog Circuit Design and Optimization:
  Direct the design and optimization of complex analog circuits, leveraging advanced schematic capture and simulation tools to achieve superior performance and reliability across diverse operating conditions.
• Drive Digital Standard Cell Library Development:
  Oversee the creation of high-performance, low-power digital standard cell libraries, ensuring alignment with stringent performance, power, and area specifications.
• Innovate Cutting-Edge Cell Architectures:
  Develop and implement advanced digital standard cell architectures, introducing innovative solutions to enhance design efficiency and meet evolving technological demands.
• Guide Layout Implementation:
  Provide strategic oversight to layout teams, ensuring accurate, efficient, and manufacturable physical implementations that adhere to performance and reliability goals.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or a related field. Advanced degrees (Master’s/Ph.D.) strongly preferred.
• Experience:
  10+ years in analog design and digital standard cell development, with expertise in deep sub-micron process technologies (12nm and below) and proven tape-out leadership.
• Advanced Technical Skills:Deep expertise in analog design, power optimization, and noise analysis.
  Mastery of tools such as Cadence Virtuoso, Spectre, and HSPICE for design and simulation.
  Extensive experience in digital standard cell library creation, optimizing for power, performance, and area.
  In-depth knowledge of deep sub-micron challenges, including layout optimization and power delivery strategies.
• Leadership and Communication:
  Demonstrated ability to lead cross-functional teams, mentor junior engineers, and foster innovation. Exceptional communication skills to articulate complex concepts and align multidisciplinary teams toward common objectives.

Our client provides the machinery, tools and technology in getting the best end glass quality.

• Manage all maintenance related problems on site, troubleshoot and provide technical support to customers.
• Responsible for site acceptance tests, commissioning and start-up assistance.
• Handle the customers on after sales service, understand and help customers define their needs.
• Perform trainings to enable users in optimizing the product performance.

Requirements:

• Diploma in Electrical/Mechanical/Mechatronic Engineering or equivalent
• At least 2 years of relevant working experience in servicing machineries.
• Independent with good time management skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client provides advanced instruments and systems designed for high performance across various industries.

• Connect with prospective clients to provide tailored semiconductor solutions.
• Manage the entire sales process, from prospecting to after-sales support.
• Liaise with global teams and R&D to tailor solutions to customer needs.
• Drive growth by exploring industry trends and opportunities in the SEA market.
  Foster and sustain strong client partnerships.

Requirements:

• Degree in Materials Science or equivalent.
• At least 2 years of sales experience in the Metrology/Scientific Industry.
• Good understanding of semiconductor processes for laboratory equipment uses for failure analysis, quality control and metrology equipment for thin film.
• Excellent communication, negotiation, and customer relationship skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Deliver engineering support for wide range of products (RF / Mixed Signal / Digital) through all phases from development to production release.
• Liaise closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement.
• Maintain close interaction with Product Test Engineering team and communicate technical product status to management.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 5 years of Product/Test Engineering experience with foundry process background.
• Hands-on experience with Advantest 93K ATE.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Provide presales support by solving technical business solutions for the client.
• Responsible for product demonstration, proposal writing, creating compliance table, training and product enablement.
• Develop working proficiency and obtain certifications on assigned products and technologies.
• Conduct hands-on POC independently and present vendor’s solution to partners and end-users.

Requirements:

• Diploma in Computer Studies or equivalent
• At least 2 years of presales experience in IT network and Cybersecurity domain.
• Good knowledge of security and networking infrastructure environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996