- 1 year Contract (Depend on job performance)

- $3000-$4000 + Allowances

- Mon to Fri: 8am to 5.30pm

- Tuas Naval Base (Shuttle Service provided at Joo Koon)

Responsibilities:

• Monitor UPS (Uninterruptible Power Supply) systems.
• Preventive & Corrective Maintenance
• Carry out or assist in preventive maintenance of UPS systems to ensure optimal performance.
• Execute corrective maintenance when necessary to resolve system faults or alarms.
• Perform additional tasks as needed to maintain the operational integrity of the UPS systems.
• Perform technical assistance for different components and systems in power management and backup solutions.
• Standby for any activation or system issues.
• Able to respond to short notice and work irregular hours to meet ad-hoc job assignments.

Period:

• 1 year contract (Depend on job performance)

Location:

• Tuas Naval Base (Shuttle Service provided at Joo Koon)

Working Hours:

• Mon to Fri: 8am to 5.30pm (Must be able to respond to short notice and work irregular hours to meet ad-hoc job assignments)

Salary:

• $3000-$4000 + Allowances

Requirements:

• Higher Nitec in Electrical Engineering/ Diploma in Electrical/Electronics Engineering or equivalent
• Minimum 2 years of experience

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Reg No.: R2198469)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Human Resource Centre Pte Ltd (EA License Number: R24124163)

160 Robinson Road, #13-07/08/09 SBF Center, Singapore 068914

T: 6337 3183 | W: www.successhrc.com.sg

. QAQC Inspector (Fabrication /Welding)

Responsibilities:

• Preparing or establishing that a welding procedure is available, has been approved as

required by the appropriate authority and is being employed in production.

• Witnessing of welder and procedure approval tests that including of the preparation of test

pieces and destructive tests and verifying compliance with appropriate standards and

specifications.

• Verification that adequate and valid welder approvals are available, and that only approved

welders as required are used in production.

• Interpretation of weld drawings and weld symbols.

• Performing of visual inspection and ensure that all finished goods are checked and approved

prior to any delivery of handover.

• Verification that post weld heat treatment has been conducted in accordance with

specification requirements.

• Appreciation of the factors influencing the formation of weld defects and their acceptability

in relation to the written specification.

• Coordination with QC Inspector (Hull/Structure and Piping) and NDT Coordinator, to verify

and ensure that all finished welds are checked and approved prior to any delivery of

handover.

• Ensure that quality assurance standards and procedures are maintained.

• Ensure that reports that are required are completed accordingly to the project

specifications.

• Liaise with Contractor, Production and Client’s representative to ensure the product is

checked and complied with the project quality plan and specifications.

• Perform any other tasks as may be assigned by the supervisor.

• Ensure compliance to relevant government regulations and company’s quality, safety, health

and environmental (QSHE) policies, practices and procedures at all times.

Requirements:

• Minimum Diploma in Engineering or relevant field of International certification (e.g. AWSCWI or CSWIP 3.1 WI).

• Physically fit since some of tasks require lifting of some equipment.

• A team player with the ability to work independently as well as in a team

• Good communication skills, meticulous, resourceful, able to multi-task

• Computer literary (MS. Office).

You will be involved in the end-to-end agile development lifecycle for in-house RPA and AI/ ML projects starting from UI/ UX Design to Cloud Engineering & Operations, Software Development, DevSecOps, Quality Assurance and Application Security.

Key Responsibilities

1. Provide mentorship, evaluate submitted problem statements and work with Product Owner and/or Citizen Developers to automate potential day-to-day processes and workflows using Robotic Process Automation and AI/ ML (RPA)

2. Work with UI/ UX Designer as they engage the Product Owner and stakeholders for user research to produce the User Journey Maps and high-fidelity wireframes, which feeds into development sprints (where required)

3. Develop clean, efficient and extendable codes using C, C++, Java and other relevant programming languages, which includes understanding code refactoring and design patterns to reduce and/or eliminate technical debt (where required)

4. Work with Cloud Engineers to setup cloud services for deployment on Government Commercial Cloud (where required)

5. Work with Quality Assurance Engineer to prepare test cases as well as entry and exit criteria for SIT and UAT to ensure that user requirements are met as described per product backlog

6. Work with Application Security Engineer to perform System Security Acceptance Test (SSAT), which includes Secure Code Review (SCR), Vulnerability Assessment (VA) and Penetration Test (PT) and remediate the security findings before seeking clearance and approval from CISO and CIO respectively (where required)

7. Maintain and update library of reusable code snippets, components and modules

8. Develop technical documentation to guide future RPA and AI/ ML development projects

9. Identify best practices and continuous improvement in deployed automations

10. Conduct RPA and AI/ML-related brown bags and information sessions for staff to share knowledge and increase adoption

Requirements

1. Background in Computer Science, Engineering or related disciplines.

2. Highly proficient in programming languages such as Python, C, C++, Java and other relevant programming languages.

3. Good technical knowledge and experience working with RPA tools such as Blue Prism, UiPath, etc as well as basic understanding of foundation models from Microsoft, AWS and Google.

4. Participated in at least one full software or product development cycle, preferably using Agile Methodology

5. Excellent communication skills

6. Teamwork and collaboration skills

7. Possess critical thinking and problem-solving skills

UX Engineer/Solution Designer (User Experience) (120)

JD:

• Set design requirements based on information from internal teams and user research.
• Identify new product improvement opportunities.
• Analyze how a new product satisfies business needs and user preferences.
• Modify and revise existing designs to meet changing customer preferences.
• Work closely with product engineers to suggest improvements for products and processes.
• Present product design ideas to cross-functional teams
• Help development teams create components by ensuring its built according to design and interaction specifications.
• Maintain the design system, create, and update documentation, and library components.

Establish design standards and principles accompanying the design system for scalability, efficiency, and consistency.

Requirement:

• Degree in Information Technology or design field, or equivalent work experience.
• Proven experience in all phases of the design process including user research, copywriting, wireframing, prototyping, visual design, interaction design, and usability testing.
• Proficiency and mastery of standard design tools (Figma, Sketch, Adobe CS and XD).
• Demonstrable experience in building design systems, component libraries, and/or UI Kits.
• An intuitive eye for customer needs beyond the obvious.
• Excellent attention to detail.
• Ability to collaborate with cross-functional team members.
• Ability to collect and interpret both qualitative and quantitative feedback.
• A well-rounded portfolio of client work, demonstrating a strong understanding of client objectives.
• Ability to effectively communicate and persuade around design concepts.
• Passion for design, not satisfied with the status quo and always thinking of ways to improve.
• Creative problem-solving skills.
• Provide assistance to product engineers when needed.
• Recommend new tools and technologies by staying abreast of the latest trends and techniques.

Interested applicants may send in their detailed resumes in MS Word to [email protected] with email subject title: UX Designer - 120

Best Regards

IT Consultancy & Services Pte Ltd

EA No: 92C5311 | EA Reg No. R1106648 | www.itcspl.com

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a QA Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

• Resolve equipment faults at customers' premises and ensure timely resolution.
• Coordinate with customers and sub-contractors to manage add-on project activities.
• Track work progress closely to ensure adherence to schedules and quality standards.
• Guarantee timely delivery of materials and equipment for site installation or fault rectification, and conduct periodic maintenance for customers.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent,
• At least 2 years of experience in troubleshooting of card access systems, alarm systems, CCTV etc.
• Possess valid class 3 driving license.
• Comfortable with stand-by duty.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Support the planning, implementation and upgrade of the cybersecurity products and solutions.
• Train external and internal clients on how to use the company products and solutions.

Requirements:

• Diploma in IT/Cyber Security Engineering or equivalent
• At least 2 years of CyberArk experience in IT, IS or Cybersecurity industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Role Profile

This technical solution focused role is accountable to setup applications and database and ensure their optimal performance to support various GovTech projects.

Key Responsibilities:

• Setup the application and database
• Perform analysis and review software application functionality and design and suggest improvement to enhance the design to cater for new services
• Consult with software development team, internal users, and clients to improve application performance
• Administer the application including user account management and configuration of the application
• Generate Test Plans and Test Procedures for User Acceptance Tests (UAT)
• Conduct UAT and prepare final UAT Reports
• Keep a record of configuration changes and scheduling application updates
• Support production issues such as establishing root causes of application issues and liaise with the software vendor to resolve issues
• Take care of application migration and new release roll-out
• Document processes and monitor application performance metrics
• Develop tools needed by L1/L2 that will help them with their investigation process
• Ensure all work activities comply with the company’s safe work procedures

Competence (Knowledge, Skills and Abilities):

• Good understanding of the software and hardware environments for CCTV/networked cameras system
• Proficient in Video and IoT management application, software analysis and design, as well as proposal write up
• Good knowledge on the key features of the CCTV / Networked Video / Security Camera / Video Management product in the market
• Sound network knowledge (Internet Protocols, TCP/IP, DNS, DHCP, SNMP, Network Architecture etc.)
• Familiar with Golang, Node JS, JavaScript, Windows Server OS, CentOS, Ubuntu OS and MongoDB

Requirements:

• High level problem solving and communication skills
• Strong technical knowledge with and certification on in-house products
• Able to deal with routine tasks and may perform tasks with some level of complexity
• Take decisions for own tasks in defined degree of freedom
• Able to solve problems in most cases and within guidelines
• Works independently within guidelines, defined procedures and direction

Education & Experience:

• Bachelor’s Degree in Computer Science, Information Technology, Software Engineering or related field
• At least 3-5 years working experience in Video and IoT Management application, software analysis and design

For personal data protection (PDP) related matters, pls refer to our PDP policy via corporate website at oconnors.co Personal Data Protection Policy.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / PLC Programmer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 9am – 6.00pm)
• Salary Package: Up to $3,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or to overseas
• Project presentation & documentation
• To work with third party engagement wherever necessary for project related matters

APPLY NOW!!!

• Diploma / Degree
• Experience in project management, especially with PLC design and implementation, is preferred.
• Good organizational and communication abilities to handle diverse project aspects.
• Willingness to travel for project supervision and commissioning.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70912 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

To liaise with consultant, client, and sub-contractors on the progress of M&E works.

To prepare method of statement, shop drawings, sample units, T&C sheets, work progress report, and other relevant documents for M&E related works.

Equipment design including Air Handling Units, Computer Room Air Handling Units, Cooling towers, Chillers, Sequence of Operations, Control Systems, Fire Detection/Suppression system

To coordinate with sub-contractors and consultants on preparation and submission of shop drawings and material/ samples

To coordinate, prepare, and check the technical submission for resolving of site issues and drawings issues.

Develop and keep up to date all site mechanical procedures including EOPs, SOPs, MOPs, and APs. All documentation should be consistent with current client standards.

Assist Technical Manager and all M&E issues including the preparation of M&E master and T&C schedule.

Manage and arrange for M&E progress inspection (R1, Fire Audit, etc), documentation for audit, use of resources and coordination works from the beginning until completion.

Requirement:

Bachelor Degree in Electrical / Mechanical Engineering accredited with PEB

8 years of experience as a Senior Engineer or M&E Manager

@ [email protected]

Job Description:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies.

We are seeking a Senior Engineer with system integration expertise with design oversight to join our team. As a vital member of our team, you will be involved in the design, development, and testing of medical devices, ensuring compliance with regulatory standards and industry best practices.

Your role will involve collaborating with cross-functional teams to create innovative solutions encompassing hardware, software and chemistry by conducting verification and validation activities, and providing technical support throughout the product lifecycle.

The ideal candidate will have a solid understanding of system integration principles, best practices in verification and validation testing, and knowledge of medical device regulations (such as ISO 13485).

Join our dynamic team and contribute to the development of cutting-edge medical devices that improve patient care and well-being.

Job Roles and Responsibilities:

• Develop high-level system architectures that meet user requirements while considering design feasibility.
• Ensure that all system components are compatible and can be integrated seamlessly.
• Design and implement integration strategies and validate the functions as intended while adhering to design principles.
• Lead collaborative teams for the design, implementation, and validation while is capable to perform hand-on testing independently if required to complete engineering or verification studies.
• Lead creating innovative solutions that align with both technical specification and user needs for medical products.
• Coordinate between design, engineering, assay, project manager, and other disciplines to ensure cohesive product development.
• Author or oversee the writing of protocols and reports.
• Foster collaboration among team members to address challenges from both a technical and design perspective.
• Creating and maintaining technical documentation, including design specifications, test protocols, and reports, ensuring compliance with regulatory requirements such as ISO 13485.

Job Requirements:

• Experience in system integration and innovation.
• Bachelor’s degree in Engineering, Design or equivalent engineering or science background.
• Comfortable with navigating uncertain situations without clear guideline.
• Adaptability to changing work conditions and project requirements.
• 5-10 years’ experience in cross-functional product development roles and completed one full product development cycle.
• Track record in working effectively with diverse teams, including engineering, design, and marketing.
• Strong interpersonal skills to facilitate communication between technical and non-technical stakeholders and ability to summarize and communicate complex problems in simple terms.
• Strong analytical skills to troubleshoot integration issues while considering design implications.
• Able to break down complex system in simple steps and identify interfaces between modules and generate system diagrams, workflows and reports.
• Curious and proactive approach to gather information necessary for decision-making.
• Knowledge of statistical tools for data analysis such as (Python/Matlab/Origin/LabView) will be a strong advantage.
• Experience with design software. Experience with CFD simulation software such as ANSYS is advantageous.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Assistant Engineer

• $2000 to $3000 + OT
• Address: Bukit Merah
• 5 Days 8.30am to 6pm

Requirements

• At least ITE or Diploma in Electrical / Electronics
• 1 year working experience in installation in the field of People Counting System, CCTV, Electronic Article Surveillance (EAS), Alarm System, Trouble Shooting, PC literate
• Must have Class 3 license
• Knowledge of electrical & electronics

Job scope

• Report to the Asst. Service Manager
• Responsible for project, implementation, installation, testing & commissioning of the system
• To carry out the maintenance works and services according to the maintenance contract.
• To manage and supervise the work progress of each project site by attending regular site meetings, coordinating with appointed sub-contractors of various services to see to ensure that projects are completed on schedule.
• To ensure proper and accurate records and documentations for the repair & servicing
• To standby and attend service calls

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Piping Design Engineer

Salary Range: $2500 - $3500

Working Days: Mon - Fri (8:15 am–6 pm)

Office Location: Joo Koon

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• At least 2 years of working experience in related field
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Assistant Project Engineer

• Working Days: 5 days’ work week
• Working Hours: 8:15 am–6 pm (Mon-Fri)
• Office Location: Joo Koon
• Salary Range: $2500 - $3500

(Fire protection Engineering Company serving the Oil & Gas & Offshore market)

Responsibilities:

• Assist project team in the execution of the project.
• Responsible for coordination & project documentation.
• Develop Technical Documentation
• Responsible for purchasing
• Liaise with authorities, sub-contractors, suppliers on project related issues.
• Attend project meeting.

Requirements:

• Candidate must possess at least ITE/Diploma in Engineering (Mechanical/Electrical/Marine)
• Autocad Skill
• Able to start work immediate or within short notice.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

• Work on RTL to GDS, including synthesis, placement, clock tree insertion and routing.
• Responsible for GDS validation like DRC/LVS, timing closure sign-off, scan, validation etc.
• Design, implement and maintain synthesis, DFT and Static Timing Analysis scripts using best-in-class methodologies.
• Work closely with other groups like Analog Design, Systems, Applications and Production in determining architecture and specification of the products.

Job Requirements

• Bachelor/Masters Degree in Electronics/Electrical/Computer Engineering with min 1 year experience
• Good experience and knowledge in design flow from Netlist to GDS, Floor Planning, Synthesis, route , STA, CTS, RC Extraction and correlation
• Static timing analysis, power and noise analysis and back-end verification across multiple projects.
• Proficient with backend design EDA tools, Synopsys ICC2 preferred
• Successfully track records of taping out complex SOC
• Working knowledge of deep sub-micron routing issues as they relate to power and timing.
• Proficiency using Perl and TCL
• Self-motivated team worker, good verbal and written communication skills

• Perform pre- and post-sales technical support to customers.
• Provide support to the sales staff in technical presentations.
• Evaluate and establish a vision system performance specification.

Requirements:

• Diploma in any Engineering field
• At least 2 years of experience in field servicing and semiconductor industry.
• Able to troubleshoot electronics hardware system, PC hardware, OS and networking.
• Good understanding in Die Sorter or Wafer Sorter

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities:

• Design, deploy, and maintain machine learning models and algorithms from scratch.
• Implement AI solutions that integrate with existing business systems to enhance functionality and user interaction.
• Manage the data flow and infrastructure for effective AI deployment.
• Collaborate across teams to align AI initiatives with organizational goals.
• Monitor and optimize resources for performance, cost, and security.
• Manage the data flow and infrastructure required for effective AI deployment.
• Troubleshoot and resolve issues promptly.
• Develop and maintain documentation for AI solutions and processes.
• Developing, deploying and debugging IaC code for AI solutions.
• Ensure that AI solutions comply with company security policies and best practices in security.
• Stay updated with the latest AI technologies and best practices.

Requirements:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• 3-5 years of relevant experience.
• Strong knowledge of AI frameworks.
• Experience in the Financial Services/Payments industry.
• Knowledge of DevOps practices and tools.
• Experience with infrastructure as code (IaC) tools.
• Excellent problem-solving skills and attention to detail.
• Strong communication and collaboration skills.
• Relevant certifications in AI technologies can be beneficial.
• Proficiency in Python, Java, and R
• Strong knowledge of AI frameworks such as TensorFlow or PyTorch

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Location : Tuas (Chemical Production Environment)

Working hours : Monday to Friday

Roles & Responsibilities

• To plan and execute corrective/preventive maintenance on facility equipment and production equipment to ensure good efficiency and availability.
• Implement TPM program in HPSL such as autonomous maintenance and critical spare part management.
• Engage external equipment vendor for service contract and ad hoc diagnostic or corrective maintenance activities.
• Support safety and EHS related activities and audits.

Description of Responsibilities and Duties

• Plan and execute corrective/preventive maintenance on facility equipment and plant equipment to ensure good efficiency and availability. Generate equipment and facilities related records/reports/ documentations on above activities.
• Implement TPM strategy. Responsible for tracking machinery spare parts usage, maintaining adequate quantity, critical parts requirement, spare parts management, continuous improvement, and ISO audits.
• Support EHSS related topics, ensure site is in full compliance with Environment, Health and Safety (EHS) and Security regulation and policy.
• Resolve various equipment performance issues internally before approaching equipment vendor. Review equipment log and technician feedback for quick solutions.
• Liaise and co-ordinate jobs to be performed by contractors for facilities and plant equipment. Ensure work completion and achieve high standard of work.
• Perform site EHSS inspection/audits and ensure that all corrective/ preventive actions are close in timely manner. Responsible for internal/external audits and EHSS activities.
• Interpret electrical diagrams and mechanical drawings for equipment troubleshooting with at least 3 years hand-on experience
• Evaluate existing/new contractors’ performance and negotiate with them on quotations and service level.

Requirements:

• Hands on experience in mixer and milling equipment maintenance is an advantage.
• Knowledge in TMP, Equipment FMEA is an advantage.
• Knowledge in facilities maintenance (Electrical, water, AC) is an advantage.
• EHS competence, familiar with ISO45001 & ISO14000 is a plus.
• Able to read electrical, hydraulic, pneumatic and mechanical diagrams and carried out maintenance work accordingly.
• Lead and guide technicians on above work.
• Operational hands-on experience
• Work under pressure and multi-tasking.
• A good team player and have good interpersonal skills
• Safety conscious

Education:

• Degree/Diploma in Mechanical Engineering or equivalent
• Minimum 5 years of relevant working experiences
• Experience in chemical and mechanical process

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to [email protected]or please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Lee Jia Chian (Jayleen)
EA Personnel Reg No: R24124361

• Oversee the installation, configuration, and upkeep of computer hardware, networks, and systems.
• Provide technical assistance and resolve issues related to hardware, software, network connectivity, and printers for end-users.
• Collaborate with users and IT vendors to deliver IT services and solutions effectively.
• Manage and implement data protection protocols and cybersecurity measures, ensuring robust security configurations and regular maintenance.
• Assist in the acquisition, procurement, and documentation of IT assets.
• Offer support for IT infrastructure, including system setup, software upgrades, and the installation of system patches.
• Configure and manage Microsoft 365 services like Exchange, SharePoint, and OneDrive, including user setup, licensing, and essential functions.
• Apply and maintain Microsoft 365 security policies and tools, such as Entra ID, Intune, Purview, Cloud Defender, and Multi-Factor Authentication (MFA).
• Hands-on experience managing Microsoft Windows environments, providing troubleshooting and email support.
• Perform other tasks as delegated by management.

Job Requirements:

• Min Diploma in Computer Science or relevant Degree qualification in a related discipline
• Strong working experience with Microsoft 365 administration
• 4 years of relevant working experience

Check out Aber Care Website for more details.

Interested applicants please email your detailed resume to [email protected]

Abercare.sg | EA License No. 18C9070 | KOH SU WEN, CLARISSA| Registration No. R24119504|

Job Description

• Work on RTL to GDS, including synthesis, placement, clock tree insertion and routing.
• Responsible for GDS validation like DRC/LVS, timing closure sign-off, scan, validation etc.
• Design, implement and maintain synthesis, DFT and Static Timing Analysis scripts using best-in-class methodologies.
• Work closely with other groups like Analog Design, Systems, Applications and Production in determining architecture and specification of the products.

Job Requirements

• Bachelor/Masters Degree in Electronics/Electrical/Computer Engineering with min 1 year experience
• Good experience and knowledge in design flow from Netlist to GDS, Floor Planning, Synthesis, route , STA, CTS, RC Extraction and correlation
• Static timing analysis, power and noise analysis and back-end verification across multiple projects.
• Proficient with backend design EDA tools, Synopsys ICC2 preferred
• Successfully track records of taping out complex SOC
• Working knowledge of deep sub-micron routing issues as they relate to power and timing.
• Proficiency using Perl and TCL
• Self-motivated team worker, good verbal and written communication skills

Ethos Search Associates Pte. Ltd.

EA Licence No: 13C6655

EA Reg No: R1109557 Rose

• Oversee contract execution and monitor installation progress, ensuring timely delivery through coordination with clients, consultants, and subcontractors.
• Prepare and review method statements, shop drawings, technical submissions, and work progress reports for M&E-related tasks.
• Liaise with stakeholders to resolve technical and site issues, and coordinate with authorities for inspections, testing, and commissioning.
• Assist in procurement of materials, equipment, and labour within budget while supporting project negotiations.
• Apply expertise in Data Centers, DfMA, and specialized systems such as VAV/VRV, chillers, chilled water pipes, and lighting control systems.

Requirements:

• Diploma in Mechanical/Electrical Engineering or equivalent.
• At least 2 years of experience handling and monitoring the progress of projects in Construction industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Pre-Sales Engineer Physical Security Job Description

The role requires the applicant to design and conceptualise the integration of multiple physical security solutions to ensure solutions are cost effective, scalable and aligned to customers security needs.

Responsibilities:

• Collaborate closely with the sales team to understand the clients requirements for physical security needs and requirements.
• Support and provide technical solutioning and support during the pre-sales process supporting the sales team during tenders for solutioning, costing and validation, including, product demonstrations, technical presentations, proof-of-concept activities, technical specifications, integration plans and compliance.
• Design nd propose comprehensive integrated physical security solutions including but not limited to access control solutions, surveillance systems, ingress protection solutions.
• Collaborate closely with the project team to hand over the design concept, costing, etc for the next phase of project implementation.
• Work together with industry partners and vendors to ensure proposed solutions are robust in design and up-to date.

Qualifications:

• Education: Bachelor’s degree in IT, Security, Engineering, or a related field.
• Experience: 5 years of experience in Integrated physical security pre-sales, system integration, or a related technical field.
• Relevant Skills:
• Team Player with strong analytical and excellent problem-solving skills.
• Ability to multi-task during peak seasons
• Strong presentation and communication skills
• Strong understanding of Integrated physical security platforms and technologies

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever!

We need someone who is passionate about detecting problems, making changes for the better, and seek out innovative ways in how predict device performance! We are an equal opportunity company who values of People, Innovation, Customer Focus, Tenacity and Collaboration.

As Yield Failure Analysis Engineer in Micron NAND Technology Integration (NTI) Singapore department, you will be responsible for providing yield analysis for next-generation Micron products. In this exciting role, you will become a domain expert on physical failure analysis methods for any given electrical failure! You will also participate in the identification and communication of yield issues, assist with the root cause analysis for process deviations, characterize, probe, parametric, and fabrication data to identify the sources of failures.

Your responsibilities will include, but are not limited to, the following:

Perform Failure analysis which includes conducting electrical characterization, perform electrical verification to confirm failures, and understanding PFA techniques available for de-processing failures

Drive failure analysis initiatives for the yield enhancement team. Create and deliver new methodologies, capabilities, and innovative ways for failure analysis de-processing failures

Participate in global meetings and present results to Product Development and Process Integrations teams

Collaborate with metrology and RDA team to re-define and validate inline detection capability

Assist and support the transfer documentation of layout/architecture fundamentals of new technology from R&D to manufacturing fab.

Understand and follow all health, safety, and environmental procedures and requirements.

Successful candidates for this position will have:

• Experience in the semiconductor industry in the areas of Process Integration, Yield Enhancement, Failure Analysis, Data Science, or Unit Process.
• In-depth knowledge and direct experience with nonvolatile memories
• Minimum 4 years of related work experience in yield analysis
• Good understanding of the process flow, and interaction of process and device.
• Poses theoretical and/or operational knowledge of scanning electron microscopes (SEM), focused ion beam (FIB), Transmission emission microscopes (TEM), and Elemental Analysis (EDS, EELS).
• Fluency in Python, JavaScript, C or C++ is Windows, Linux, JMP statistic software is desirable.
• Ability to be self-motivated and self-governing with confirmed ability to work in a demanding and dynamic environment.
• Solid analysis, communication and reporting abilities with demonstrated presentation abilities.

Education:

B.S., M.S., or Ph.D. in Electrical Engineering, Microelectronics, Materials Science, Chemical Engineering, Physics, or a related field. We also consider applicants with equivalent experience.