WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,200 - $5,800
Location: Woodlands

Key Responsibilities:

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirements:

• Bachelor's Degree in Electrical and / or Electronics Engineering.
• Min 3 Years of relevant experience.
• Added advantage but not mandatory: programing skill of PLC (Beckhoff preferred), motion controllers, robots and touch panels.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• Kaki Bukit (East)

Your Responsibilities: -

• Generate mechanical drawings
• Coordinate with customers about requirements and feedbacks
• Ensure drawings are in correct specification and requirements
• Follow-up of assembly and installation work

You will need: -

• No experience required, traning provided

Apply now or email to [email protected]

Good luck! Only shortlisted candidates would be notified.

Ho Tze Chin (Kenny) R1762905 Recruit Lync Pte Ltd 22C1000

• Working day: Monday – Friday
• Working Hour: 8:30am - 6:15pm
• Salary range: $3,200 - $5,800
• Location: Woodlands

Key Responsibilities:

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirements:

• Bachelor's Degree in Electrical and / or Electronics Engineering.
• Min 3 Years of relevant experience.
• Added advantage but not mandatory: programing skill of PLC (Beckhoff preferred), motion controllers, robots and touch panels.

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

• Working Location: Jurong Pier Road - Boon Lay
• Working Days: Monday – Friday
• Working Hours: 8:30am - 5:15pm
• Salary range: SGD 3,700 to SGD 5,000 monthly, 13th month, SGD 250 transport allowance

Specific Responsibilities

• Standby support and 24/7 emergency call for customer support.
• Providing after-sales technical support, site recovery and maintenance responsibilities to distributors/end customers.
• Provide the installation, commissioning and on-site training to support the customers according to the scope of the project.
• Generate a service report to customer in a systematic manner.
• Investigate and handle all customers’ complaints related to product failures.
• Investigates root causes of failures and recommend solutions.
• Review and assist in determining the extend of damage and repairs of warranty claims from distributors.
• Maintain close working relationship with our key customers to ensure the follow through until the issue is resolved.
• Develop service training material, ensures all technical and training documents are up-to-date and organized.
• Provides specific training to distributors and dealers for service and troubleshooting skillsets, ensuring optimum service level at all distributors.

Qualifications / Requirements

• Diploma/degree in Electrical/Mechanical Engineering with at least 5 years of relevant experience
• This position requires fair amount of traveling in the Asia Pacific and Southeast Asia Region
• Possess strong customer service orientation, enthusiasm for power generation products, electrical and control system
• Candidates with equivalent professional background will be considered
• Prior electrical and control experience with various control system (John Deere ECU and KDI ECU) and synchronization system will be advantageous

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

This position is for FULL TIME morning/afternoon shifts, and will require some weekend shifts for maintenance and support activities. Work is non-routine and complex, involving the application of advanced technical/business skills in area of specialization. Provide direction and mentoring to others.

As a Principal Site Reliability Engineer, you will be part of the DevSecOps culture who will combine software and systems engineering to build, package, release and integrate tools and applications that will strengthen and innovate in the Cloud space within the Oracle SaaS-at-Customer and OCI DRCC infrastructure.

Responsibilities:

• Team members will engage in operational activities including monitoring, installation, patching, and upgrading of Oracle Fusion Middleware, Fusion Applications, and Oracle database implementations.
• Work on the SaaS Engineering Operations team with full stack deployment and support responsibilities.
• Address extremely complex, critical customer system issues on a routine basis and document technical solutions.
• Work directly with customers, product development, and product support to resolve critical customer application or performance issues in a timely basis.
• Understand the end-to-end configuration, technical dependencies, and overall behavioral characteristics of production services.
• Authority for end-to-end performance and operability.
• Perform frequent planned DR switchovers.
• Utilize a deep understanding of service topology and their dependencies required to troubleshoot issues and define mitigations.
• Collaborate with team members to improve the team's engineering tools, systems, procedures, and security.
• Lead implementation of tools and processes using DevSecOps methodologies to innovate, design, develop, secure, build, release and support fully automated CI/CD pipelines for the development and maintenance of Cloud Infrastructure Services and relevant applications.
• Manage and operate the infrastructure and configuration of microservices with a focus on end-to-end automation and infrastructure as code.
• Perform code development, OCI DRCC region builds, monthly release deployments, operations engineering, and promotion to testing and production environments to support Sprint activities.
• Participate in developing, implementing, and enforcing policies to enhance cloud system security.
• Recommend technical policies and consult with development teams on remediation.
• Collaborate with team members to improve the team's engineering tools, systems, procedures, and security.
• Apply DevSecOps methodologies in assisting to determine the direction of current and future development projects.
• Evangelize security and application solutions and controls by creating and communicating presentations both internally and externally.
• Demonstrate flexibility and resilience in response to changing or ambiguous situations.
• Work across development and operational environments.
• Stay abreast of software testing technologies and best practices.

Minimum Required Experience

• Relevant experience to functional area with around 10 years of experience (7+ years of software engineering and at least 3 years of DevSecOps culture)
• Extensive experience with Oracle RDBMS, Real Application Cluster (RAC), Disaster recovery, WebLogic, Identity Management, Apache/HTTP, Apex and Fusion Middleware and/or other Oracle technologies.
• Experience with cloud solutions and security engineering/design experience on one of the major cloud platforms AWS, GCP, Azure, OCI (preferred).
• Extensive experience in using Terraform for orchestrating application resources and infrastructure in CI/CD platform.
• Extensive experience in DevSecOps culture.
• Extensive experience with scripting and coding languages like shell scripting (must), Python (must), Ruby (plus), Go (plus) but not limited to.
• Experience developing cloud native CI/CD workflows and tools such as Chef, Puppet, Jenkins, Ansible, Rundeck and Git.
• Experience with Release Management cycles and Git.
• Knowledge of storage (ZFS preferred), IP networking, VPN's, DNS, load balancing and firewall (F5).
• Experience with one or more of the following required (Docker, Kubernetes, Terraform, Kafka, Microservices, Machine Learning, Artificial Intelligence)
• Experience with full software development lifecycle and delivery using Agile practices.
• Extensive background in cloud applications, cloud platforms and/or experience providing cloud infrastructure platforms in complex environments.
• Highly self-motivated with the ability to work both independently and with members of a global team without close supervision.

Job Descriptions:

• Technical window for new product development.
• Involvement in developing the methodology for implementation of new and improved processes.
• Perform hands-on testing such as setting up the presses, moulds, process development and other engineering activities.
• Develop and document moulding processes, ensuring they meet all technical and quality standards, including DOE and process window study.
• Utilize scientific moulding principles to analyse and troubleshoot process issues, implementing corrective actions to improve efficiency and product quality.
• Preparation of process-related technical documentation, like FMEA, validation protocol, engineering report, evaluation processing parameters and data.
• Trial new tooling and equipment and make modifications as needed to meet quality and production goals.
• Liaison with customer engineering teams, incorporate customer engineering concepts, and ideas into feasible designs to fit facility/company manufacturing process.
• Use creative skills to assist in solving design or manufacturing issues or constraints.
• Provide primary tooling component and packaging cost input for quotation of new business.
• Work closely with the internal engineering team and outside vendors in tooling, equipment, component and material development.
• Work closely with customers on product, project or system development issues.
• Keep up on the latest industry standards, processes and procedures.
• Participate in formal improvement team activities.
• Support all development and initiate improvements to achieve business objectives.
• Travel to other sites and customer sites to perform testing onsite and knowledge transfer when required.
• Other tasks as assigned by supervisors/managers.

Requirements:

• Diploma/Degree in Mechanical Engineering/relevant field
• Strong mechanical aptitude and problem-solving skills.
• 5 years of hands-on working experience and process DOE will be a plus.
• Experience in the Medical Device Manufacturing industry.
• Experience in LSR will be a plus.
• Experience in Minitab software will be a plus.
• ISO9001 and ISO13485 awareness certification will be a plus.
• Good communication skills.
• Lead the technical team and provide training where required.
• Able to liaise with customers and interact with relevant persons in technical discussions.

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Technology Solutions Office is looking for Software Engineer

Internal Code: A25025

What will you do?

• Work with project leads, developers and operations on a live commercial project that has more than one million users on its platform.
• Software support and maintenance of deployed products and solutions
• Work closely with project management and experience design team to deliver project outcomes

• Strong hand-on experience in NodeJS Technologies
• Solid hand-on experience with AngularJS, ReactJS
• Knowledge of Object-Oriented Programming and SQL
• Experience with React Native, Microsoft SharePoint is a plus
• Proficient knowledge of languages such as .NET and/or Java will be a plus
• Ability to manage a hosting environment, including database administration as well as scaling applications to handle load changes
• Experienced in developing on Unix/Linux environments
• Effective communication skills & customer-oriented mindset
• Ability to work with a multiple team and stakeholders
• Enjoy constant learning and working with new technologies
• Excellent critical thinking and problem solving skills
• Experience in public sector projects is a plus
• Candidates who had previously managed small teams will be considered for the Senior/Lead positions
• Appointment will commensurate with experience and qualification.
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is strongly preferred.

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

About iNova

iNova is a different kind of health company. We are leading the way to better health by delivering innovative, patient-centric products that improve the lives of people around the world. Our diverse portfolio of iconic, market-leading consumer health brands and prescription medicines are backed by science and distributed in over 75 markets across Asia, Australia, New Zealand, Middle East & Africa and Europe. Experience the iNova difference today.

The Opportunity

We currently have an opportunity for a Data Engineer - Snowflake to based in Philippines or Singapore, to join our Group Technology Team.

Reporting to the Head of IT Strategy, Architecture & Governance, the Data Engineer will be primarily responsible for designing, developing, and optimizing data warehouse solutions with Snowflake. Secondarily, this role will involve supporting the integration of ETL processes using Microsoft tools (Azure Data Factory, LogicApps etc.) into the Snowflake ecosystem.

Knowledge of data visualization through Power BI would also be desirable to ensure provision of available, reliable, and structured datasets from Snowflake for both reporting and analysis purposes.

This role requires extensive knowledge of data engineering processes, data modelling, data warehousing, and business intelligence best practices. A successful candidate will be able to transform complex business needs into efficient, scalable, and secure data pipelines solutions.

Key Responsibilities

Primary - Data Warehouse Development and Management:

• Design and manage data warehouse solutions in Snowflake, ensuring data integrity, optimization, and security.
• Maintain and improve the performance of the data warehouse to meet the reporting and analytical needs of the business.
• Ensure Snowflake environment is optimized to integrate with upstream data-sources.
• Support Data Governance and Quality within the Snowflake environment.

Secondary - Data Integration / ETL and Visualization Support:

• Collaborate with internal and external integration specialists to identify data requirements and co-design data integration solutions.
• Consume output datasets from various internal and external sources into Snowflake as processed using Microsoft tools such as Azure Data Factory and LogicApps.
• Familiarity with other ETL tools such as Alteryx would also be beneficial.
• Ensure that Power BI reports deliver accurate, real-time data insights through providing appropriate reporting datasets.

Collaboration with Business and IT Teams:

• Work closely with business units including finance, marketing, supply chain, and sales to gather reporting requirements and translate them into technical solutions.
• Liaise with data governance teams to ensure adherence to best practices in data management and security.

Documentation and Compliance:

• Maintain documentation for all data pipelines, transformations, and visualizations, ensuring clarity and consistency for both technical teams and end-users.
• Ensure adherence to corporate policies and industry standards related to data security and compliance.
• Previous experience with CSV and GxP requirements would be a plus.

About You

To be successful in this role, you will possess a Bachelor’s degree in Computer Science, Information Technology, or a related discipline, with a minimum of 5 years hands-on experience in data engineering, with a focus on building and managing data warehouses in Snowflake.

Other key requirements for this role include:

• Snowflake Certification (SnowPro Core and/or other Advanced Certifications) a plus but not mandatory.
• Hand-on experience building data-pipelines in Snowflake with SQL and/or Python.
• Hands-on experience with Data Governance in Snowflake including compliance, security, privacy and access
• Ideally, experience with developing data-centric capabilities using Python in Snowpark and/or applications with StreamLit.
• Experience with ETL tools with a focus on Snowflake Integration, particularly within the Microsoft stack (Azure Data Factory & Logic Apps).
• Experience in building datasets to enable reports and dashboards using Power BI.
• Experience with data integration from cloud platforms and various APIs a plus.
• Effective Communication Skills (Written & Verbal).
• Personal accountability for outcomes and providing high-quality service to business users
• A strong work ethic and a well-organized self-starter.
• Optimistic “can do” personality.
• Be open to change and willing to learn new skills.
• An ability to follow up on pending issues and meet deadlines.

about the company

Our client is a renowned international consulting firm focused on maritime engineering. Their clientele includes government authorities, port authorities, industrial companies and private enterprises. They do both big-scale and small-scale projects worldwide.

Currently they are looking for a Senior/ Structural Design Engineer to join the team due to increased demand of projects. The potential candidate will be involved in the design of infrastructure type of works (mostly Marine related). The company pays 13 months fixed annual salary with 21 days of annual leave. The company encourages the work/life balance culture.

about the job

• Design and analysis of Marine Structures (reinforced concrete, steel design, ship-shore design and some geotechnical affinity)
• Discuss your designs with the project manager where you put forward technical advice
• Mentor/ coach less experienced colleagues on the project
• Support the drafters and BIM modelers to ensure the drawings and models comply with the design and specifications.

skills & experience required

• Msc / Degree in Civil Engineering
• Structural engineering with marine coastal and geotechnical engineering experience
• Min 3 years of relevant experience
• Knowledge of Industry Codes and Standards

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg
Please include your availability, expected salary and reason for leaving current job
We regret that only shortlisted candidates will be contacted
EA: 94C3609 / Reg: R1325913

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

Company’s Profile:

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for System Engineers to join their team and contribute to their

ongoing success.

Location: Ang Mo Kio/Yio Chu Kang area

Job Responsibilities:

• Providing technical consultancy advice relating to system design and configuration.
• Implement system infra expansion design and configuration Monitor System Performance.
• Assisting the customer in the verification, isolation and/or provision of a temporary work around for the incident/problem logged.
• Resolving system incident/ problem onsite.
• Escalating unsolvable problems and service requests to the System and/or Software Engineer and reporting the escalation to the Operation/ Project Manager.
• Applying operating system updates, patches, and configuration changes.
• Maintaining the configuration of the system.
• Liaising with OEM/Vendor/subcontractor for technical support.

Requirements:

• At least 1 – 2 years’ onsite Systems Engineer experience
• Good understanding of Infra system design
• Excellent communication skills with customers
• Keen sense of urgency for service performance issues
• Diploma or Degree in any IT discipline or equivalent

Interested candidates may whatsapp your resume to 6421 4965. Only shortlisted applicants will be contacted.

Cassie Chan | R2197426

Talentsis Pte Ltd | EA No: 20C0312

• Supervise, execute, and coordinate project activities until project completion.
• Ensure the project is on schedule, within budgeted cost and quality standards.

Requirements:

• Diploma in Electrical or Electronics Engineering
• At least 2 years’ experience in alarm, card access and CCTV system installation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Purpose:

To support the Program Manager in strengthening existing customer relationships and ensuring smooth day-to-day operations, which include New Product Introduction (NPI), Order Administration, BOM Management and Planning.

Job Description:

1. Customer Relationship Management

• Build and maintain strong relationship with customers by identifying and assessing customers’ current and future needs
• Timely fulfilment of customers’ orders or communication of schedule revision
• Liaise with internal departments to ensure orders will be fulfilled on time
• Respond to all customers’ inquiries promptly
• Prepare and provide reports and proposals to customers as required
• Support customers’ audits and visits when necessary

2. New Product Release

• Responsible for ECN (Engineering Change) and new BOM (Bill of Material) management, which includes item master creations.
• Ensure that all ECNs and BOMs are cross checked before releasing it and any ad hoc amendment to the BOM through internal ECN or waiver
• Manage FAA (First Article Approval) submission and approval.
• Define Production Routing Guide for manufacturing
• Ensure packing handling units (carton & palletization) are defined accordingly
• Maintain customer part numbers in ERP system
• Manage EOL (End of Life) of products.
• Handles new customer requirement that involves ERP system update and UAT
• Work together with manufacturing engineer & production to define the relevant process or packing instruction
• Maintain the relevant documents pertaining to BOM management, which includes work instruction, sticker placement
• Interface customer with respect to NPR, ECN, and FCS launch management
• Prepare samples for customer review/approval
• Prepare and participate in customer audit on new SKUs or artwork
• Create BOM structure for all new product release from sketch and maintain item, BOM, ECN and void in customer's SAP as per customer requirements

3. Report and Masterlist Tracking

• Ensure FAA Tracking List and BOM masterlist are well maintained
• Prepare launch tracking report
• Prepare QBR data on relevant sections
• Prepare weekly/ monthly reports as requested by customers and management

4. Order Processing

• Acknowledge and process sales orders, coordinate with various departments and related parties to fulfil order
• Prepares samples, price estimates and quotations within customer’s expectations and timeframe
• Creates work orders for production and replacement work orders if necessary
• Ensure prompt billing of invoices and assist in overdue payment collection
• Manage customer’s product content effectively

5. Material Planning

• Plan and make purchase requisition for necessary materials to ensure materials availability in meeting production needs while minimizing inventory holding/costs
• Manages inventory level for raw materials, work-in-progress and finished goods
• Analyse order trends and prepare forecast schedule to material planner

6. Productivity and Innovation

• Identify potential improvement initiatives
• Implement feasible improvement initiatives to enhance effectiveness, efficiency and/or economy

Job Requirements:

• Diploma/Degree in Business Administration, Supply Chain Management or other relevant fields
• 1 – 2 years of experience in operations/supply chain environment (Program Administrator)
• 3 – 5 years of experience in operations/supply chain environment (Senior Program Administrator)
• Strong interpersonal skills with good presentation and communication abilities
• Independent and proactive, with strong customer service orientation.
• Experience in printing and packaging industry will be an added advantage
• Knowledge in MRP and SAP systems will be added advantage

- The Solar Photovoltaic (PV) and Energy Storage Systems (ESS) Asset Maintenance Engineer leads in the operations and maintenance of solar PV ,Hot water and ESS

- Establishes new methods to optimise system performance and improve maintenance processes.

- He/She prepares cost estimates for maintenance and verifies claims on repair works.

- He/She occasionally works outdoors at solar PV, Hot water and ESS sites.

- He/She is systematic and has good problem-solving skills in leading the operations and maintenance works

- He/She has good leadership and communication skills to engage his/her stakeholders.

- He/She is also service-oriented and ensures customers are satisfied with the services provided.

- He/She to Create Maintenance Schedules

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / PLC Programmer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 9am – 6.00pm)
• Salary Package: Up to $3,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or to overseas
• Project presentation & documentation
• To work with third party engagement wherever necessary for project related matters

APPLY NOW!!!

• Diploma / Degree
• Experience in project management, especially with PLC design and implementation, is preferred.
• Good organizational and communication abilities to handle diverse project aspects.
• Willingness to travel for project supervision and commissioning.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70912 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

To liaise with consultant, client, and sub-contractors on the progress of M&E works.

To prepare method of statement, shop drawings, sample units, T&C sheets, work progress report, and other relevant documents for M&E related works.

Equipment design including Air Handling Units, Computer Room Air Handling Units, Cooling towers, Chillers, Sequence of Operations, Control Systems, Fire Detection/Suppression system

To coordinate with sub-contractors and consultants on preparation and submission of shop drawings and material/ samples

To coordinate, prepare, and check the technical submission for resolving of site issues and drawings issues.

Develop and keep up to date all site mechanical procedures including EOPs, SOPs, MOPs, and APs. All documentation should be consistent with current client standards.

Assist Technical Manager and all M&E issues including the preparation of M&E master and T&C schedule.

Manage and arrange for M&E progress inspection (R1, Fire Audit, etc), documentation for audit, use of resources and coordination works from the beginning until completion.

Requirement:

Bachelor Degree in Electrical / Mechanical Engineering accredited with PEB

8 years of experience as a Senior Engineer or M&E Manager

@ [email protected]

Job Description:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies.

We are seeking a Senior Engineer with system integration expertise with design oversight to join our team. As a vital member of our team, you will be involved in the design, development, and testing of medical devices, ensuring compliance with regulatory standards and industry best practices.

Your role will involve collaborating with cross-functional teams to create innovative solutions encompassing hardware, software and chemistry by conducting verification and validation activities, and providing technical support throughout the product lifecycle.

The ideal candidate will have a solid understanding of system integration principles, best practices in verification and validation testing, and knowledge of medical device regulations (such as ISO 13485).

Join our dynamic team and contribute to the development of cutting-edge medical devices that improve patient care and well-being.

Job Roles and Responsibilities:

• Develop high-level system architectures that meet user requirements while considering design feasibility.
• Ensure that all system components are compatible and can be integrated seamlessly.
• Design and implement integration strategies and validate the functions as intended while adhering to design principles.
• Lead collaborative teams for the design, implementation, and validation while is capable to perform hand-on testing independently if required to complete engineering or verification studies.
• Lead creating innovative solutions that align with both technical specification and user needs for medical products.
• Coordinate between design, engineering, assay, project manager, and other disciplines to ensure cohesive product development.
• Author or oversee the writing of protocols and reports.
• Foster collaboration among team members to address challenges from both a technical and design perspective.
• Creating and maintaining technical documentation, including design specifications, test protocols, and reports, ensuring compliance with regulatory requirements such as ISO 13485.

Job Requirements:

• Experience in system integration and innovation.
• Bachelor’s degree in Engineering, Design or equivalent engineering or science background.
• Comfortable with navigating uncertain situations without clear guideline.
• Adaptability to changing work conditions and project requirements.
• 5-10 years’ experience in cross-functional product development roles and completed one full product development cycle.
• Track record in working effectively with diverse teams, including engineering, design, and marketing.
• Strong interpersonal skills to facilitate communication between technical and non-technical stakeholders and ability to summarize and communicate complex problems in simple terms.
• Strong analytical skills to troubleshoot integration issues while considering design implications.
• Able to break down complex system in simple steps and identify interfaces between modules and generate system diagrams, workflows and reports.
• Curious and proactive approach to gather information necessary for decision-making.
• Knowledge of statistical tools for data analysis such as (Python/Matlab/Origin/LabView) will be a strong advantage.
• Experience with design software. Experience with CFD simulation software such as ANSYS is advantageous.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• Resolve equipment faults at customers' premises and ensure timely resolution.
• Coordinate with customers and sub-contractors to manage add-on project activities.
• Track work progress closely to ensure adherence to schedules and quality standards.
• Guarantee timely delivery of materials and equipment for site installation or fault rectification, and conduct periodic maintenance for customers.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent,
• At least 2 years of experience in troubleshooting of card access systems, alarm systems, CCTV etc.
• Possess valid class 3 driving license.
• Comfortable with stand-by duty.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Support the planning, implementation and upgrade of the cybersecurity products and solutions.
• Train external and internal clients on how to use the company products and solutions.

Requirements:

• Diploma in IT/Cyber Security Engineering or equivalent
• At least 2 years of CyberArk experience in IT, IS or Cybersecurity industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

UX Engineer/Solution Designer (User Experience) (120)

JD:

• Set design requirements based on information from internal teams and user research.
• Identify new product improvement opportunities.
• Analyze how a new product satisfies business needs and user preferences.
• Modify and revise existing designs to meet changing customer preferences.
• Work closely with product engineers to suggest improvements for products and processes.
• Present product design ideas to cross-functional teams
• Help development teams create components by ensuring its built according to design and interaction specifications.
• Maintain the design system, create, and update documentation, and library components.

Establish design standards and principles accompanying the design system for scalability, efficiency, and consistency.

Requirement:

• Degree in Information Technology or design field, or equivalent work experience.
• Proven experience in all phases of the design process including user research, copywriting, wireframing, prototyping, visual design, interaction design, and usability testing.
• Proficiency and mastery of standard design tools (Figma, Sketch, Adobe CS and XD).
• Demonstrable experience in building design systems, component libraries, and/or UI Kits.
• An intuitive eye for customer needs beyond the obvious.
• Excellent attention to detail.
• Ability to collaborate with cross-functional team members.
• Ability to collect and interpret both qualitative and quantitative feedback.
• A well-rounded portfolio of client work, demonstrating a strong understanding of client objectives.
• Ability to effectively communicate and persuade around design concepts.
• Passion for design, not satisfied with the status quo and always thinking of ways to improve.
• Creative problem-solving skills.
• Provide assistance to product engineers when needed.
• Recommend new tools and technologies by staying abreast of the latest trends and techniques.

Interested applicants may send in their detailed resumes in MS Word to [email protected] with email subject title: UX Designer - 120

Best Regards

IT Consultancy & Services Pte Ltd

EA No: 92C5311 | EA Reg No. R1106648 | www.itcspl.com

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a QA Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Role Profile

This technical solution focused role is accountable to setup applications and database and ensure their optimal performance to support various GovTech projects.

Key Responsibilities:

• Setup the application and database
• Perform analysis and review software application functionality and design and suggest improvement to enhance the design to cater for new services
• Consult with software development team, internal users, and clients to improve application performance
• Administer the application including user account management and configuration of the application
• Generate Test Plans and Test Procedures for User Acceptance Tests (UAT)
• Conduct UAT and prepare final UAT Reports
• Keep a record of configuration changes and scheduling application updates
• Support production issues such as establishing root causes of application issues and liaise with the software vendor to resolve issues
• Take care of application migration and new release roll-out
• Document processes and monitor application performance metrics
• Develop tools needed by L1/L2 that will help them with their investigation process
• Ensure all work activities comply with the company’s safe work procedures

Competence (Knowledge, Skills and Abilities):

• Good understanding of the software and hardware environments for CCTV/networked cameras system
• Proficient in Video and IoT management application, software analysis and design, as well as proposal write up
• Good knowledge on the key features of the CCTV / Networked Video / Security Camera / Video Management product in the market
• Sound network knowledge (Internet Protocols, TCP/IP, DNS, DHCP, SNMP, Network Architecture etc.)
• Familiar with Golang, Node JS, JavaScript, Windows Server OS, CentOS, Ubuntu OS and MongoDB

Requirements:

• High level problem solving and communication skills
• Strong technical knowledge with and certification on in-house products
• Able to deal with routine tasks and may perform tasks with some level of complexity
• Take decisions for own tasks in defined degree of freedom
• Able to solve problems in most cases and within guidelines
• Works independently within guidelines, defined procedures and direction

Education & Experience:

• Bachelor’s Degree in Computer Science, Information Technology, Software Engineering or related field
• At least 3-5 years working experience in Video and IoT Management application, software analysis and design

For personal data protection (PDP) related matters, pls refer to our PDP policy via corporate website at oconnors.co Personal Data Protection Policy.

Key Responsibilities:

• Develop and execute sales and marketing strategies for valves and instrumentation measurement products.
• Identify and source new business leads to expand the customer base.
• Build and maintain strong, collaborative relationships with key customers.
• Manage MRO (Maintenance, Repair, and Operations) activities and assigned projects efficiently.
• Promote the company’s capabilities and products to both existing and potential clients.
• Ensure annual sales targets are achieved through effective team leadership and strategic planning.

Requirements:

• Solid knowledge of valves, instrumentation, and measurement systems, including installation, operation, and troubleshooting.
• Established connections within relevant industries in O&G, Marine Offshore industry for accelerated onboarding and business growth.
• Class 3 Driving LIcense is good to have.
• Strong interpersonal and communication skills.
• Ability to develop and maintain long-term customer relationships.
• Target-driven with a proactive and results-oriented approach.
• Knowledge of the local market, particularly in areas like Jurong Island, is highly preferred.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)