Technical Engineer

Key Responsibilities

1. System Design and Development

· Design and implement solutions involving barcode scanners, RFID readers, and card-based access control systems.

· Develop integration plans for speedgates with these technologies to ensure seamless functionality.

· Evaluate and recommend appropriate hardware and software solutions to meet project requirements.

· Create technical documentation, including schematics, workflows, and system architecture.

2. Installation and Configuration

· Configure and install barcode scanners, RFID readers, and access control card systems.

· Oversee the physical installation of speedgates and their associated components.

· Calibrate devices for optimal performance and accuracy.

· Ensure compliance with safety and security standards during installation.

3. Integration

· Integrate barcode, RFID, and card systems with speedgates and other access control systems.

· Implement software and firmware updates for all components.

· Develop APIs or use existing interfaces to connect devices with management software or enterprise systems.

4. Troubleshooting and Maintenance

· Perform diagnostics on malfunctioning devices or systems to identify and resolve issues.

· Conduct regular maintenance on barcode scanners, RFID readers, card systems, and speedgates.

· Monitor system performance and propose upgrades or replacements when needed.

· Respond to technical support queries and provide on-site or remote assistance.

5. Testing and Quality Assurance

· Conduct tests to validate the accuracy and reliability of barcode and RFID readings.

· Ensure the synchronization of all integrated systems, including speedgates.

· Perform stress testing to confirm the system's ability to handle high traffic and loads.

6. Project Management and Collaboration

· Collaborate with architects, developers, and security teams to deliver integrated solutions.

· Manage timelines, budgets, and deliverables for related projects.

· Train end-users and provide documentation for system operation and troubleshooting.

7. Innovation and Research

· Stay updated on emerging technologies in barcodes, RFID, and access control systems.

· Explore opportunities for automation and efficiency improvements using these technologies.

· Recommend innovative solutions that enhance operational efficiency and user experience.

---

Required Skills

· Strong understanding of barcode technologies (e.g., QR codes, linear codes) and RFID systems (active, passive tags).

· Proficiency in card system technologies, such as smart cards and magnetic stripe cards.

· Knowledge of speedgate mechanics and automation.

· Programming skills for system integration (e.g., Python, C++, Java, or relevant API languages).

· Familiarity with networking and data communication protocols (TCP/IP, Wi-Fi, NFC, etc.).

· Hands-on experience with diagnostic tools and troubleshooting.

Responsibilities:

• Assist Project Manager in site supervision and management.
• Responsible for planning, scheduling, forecasting, conducting and coordinating the technical and management aspects of projects.
• Controlling the cost of the materials and labour.
• Coordination and checking of engineering deliverables.
• Attend site meeting, inspection, and monitoring of project progress with Main Con and Sub-cons.
• Liaising and coordinating with all parties involved in the projects such as consultants, main contractors, sub-contractors, suppliers, local authorities, environmental agencies, and federal entities to ensure successfully implementation of the project.
• To manage daily operation of the project execution.
• Solving construction problems as soundly as possible.
• Acting as the quality control and assurance to ensure that the project objectives are met.
• To ensure that project paper works are properly kept and up to date.
• Ensure safe work procedures are implemented to control risk.
• Familiar with the relevant legal requirement.
• Other ad-hoc duties as assigned

Job Requirements:

• Degree in Civil Engineering recognised by the Professional Engineers (PE) Board or qualifications accepted by the Commissioner of Building Control for registration as Resident Engineer.
• At least five (5) years relevant experience including in planning the construction of vehicular structures and roads involving stage diversions.
• Self-motivated, dynamic and goal orientated candidate
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Able to start work within short period

1) Devising and establishing software systems to support the implementation of strategies set by company’s management .

2) Development and maintenance of all our internal software systems and database.

3) Offer training to the company staff on the software and technical hardware usage.

4) Liaising with external vendors regarding network related matters and website hosting.

5) Staff support and maintaining hardware systems (CCTV, PCS/Laptops/Printers etc.) .

6) Server Maintenance & configurations.

7) Internet /Router Maintenance Requirements.

8) Bachelor’s Degree in Computer Science or equivalent 2+ yrs Experience in Programming Language Asp.Net C#, Sql Server 2012 or above Well verse in getting Requirements, Programming & Testing accordingly.

Purpose: Responsible for supervising staff, ensuring health and safety regulations at work are followed, making sure adequate training has been provided to the workers in the usage of equipment, and identifying deficiencies to be improved in production.

Key Area of Responsibilities:

• Supervising the man and assembly process, ensuring quality work is done safely and efficiently.
• Organize and motivate the mini-companies to perform daily production activities.
• Draw up training, and job rotation plans to develop manpower to be more flexible and competent and stimulate continuous productivity improvement.
• Liaising with other Engineers to develop plans that improve productivity, in terms of costs and manpower required.
• Support engineering/manufacturing teams, draw up safety protocols, report issues to the manager, and develop strategies to improve efficiency and profit.
• Take part in quality meetings with QA and process, conduct production CAB meetings, and ensure corrective actions are carried out.
• Conduct daily supervisor and production meetings to achieve delivery reliability.
• Record and report on the department’s activities and production results regularly in each productivity review meeting.
• Manage consumables and non-capitalized equipment spending.
• Maintain and ensure 5S housekeeping on the shop floor.

Qualification & Experiences:

• Diploma/bachelor’s in engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering).
• At least 3 years of experience as an engineer in the manufacturing assembly environment.
• Good communication skills to perform mentoring and coaching to production staff.
• Good knowledge in problem-solving methodology.
• Ensure the safety standards and process safety management is duly followed.

The Second Engineer reports to the Chief

Engineer and supervises routine and

scheduled operation and maintenance

work in the engine department, or other

location as required.

The Second Engineer duties and

responsibilities include:

- In charge of engine room in the absence

of Chief Engineer.

- Responsible to the Chief Engineer for the

efficient operation, maintenance and

repair of main machinery and all items of

auxiliary machinery and brought to the

attention of the Chief Engineer

immediately for any defects in equipment.

- The Second Engineer is to familiarize

himself and his subordinates in Engine

Room with the Company’s policies and

Shipboard Operating Procedures Manuals

and conversant with the methods of use of

all safety equipment and emergency

procedures.

- Responsible for advising the Chief

Engineer of spare part requirements and

ensuring efficient state of

preservation/stowed with documentation.

- The Second Engineer shall be responsible

to the Chief Engineer and shall undertake

duties as allocated by him as below.

• Keeping & maintaining engine-room

watch as required.

• Assists in the upkeep & recording of the

Inspection & Testing log.

• Assists in the preparation of docking /

repair list.

• Assists in monitoring & controlling the

usage of bunkers, lubes, stores, spares,

etc.

• Maintenance of lifesaving & fire-fightingequipment in engine room.

• Maintains the engine room in a safe &clean environment.

Requirements:

- COC Class II or I

- Minimum 3 years of experience on board

as Second Engineer on Oil / Chemical vessel.

- Good leadership, teamwork,

management and communication skills

- Must be willing to follow Company

planned working schedule on board vessel

Our client, one of world’s largest financial services institutions is looking for:

Test Engineer

Responsibilities:

• The role involves writing test cases, preparing and creating test data, and executing and retesting test cases.
• Able to leverage on in-house GenAI for test case creation and enrichment
• Ensure test runs and results are completed within the given time frame.
• Develop and execute test plans to validate software functionality against requirements and specifications.
• Identify, report, and track software defects and issues.
• Perform functional, performance, security, and regression testing of software products.
• Report test results and defects to the development team and other stakeholders, and work on their resolution.
• Provide suggestions and feedback to improve the quality of the software development process across teams.
• Stay updated with the latest testing tools, techniques, and methodologies.
• You will work closely with the Testing Centre of Excellence (COE) to enhance testing processes and standardize testing practices across operations

Requirements

• Degree or diploma in computer science, engineering, or similar technical certifications.
• At least 1 year experience in testing, quality assurance, or similar roles.
• Excellent problem-solving skills, an analytical mindset, and strong communication skills.
• Preferred skills in testing tools such as JIRA, Selenium, Appium, and other testing frameworks.

-----------------------------------------------------------------------------------------------------

Interested applicants can also email CV at [email protected] (for faster processing, please state the exact job/position title applied “Test Engineer”)

Only shortlisted candidates will be notified.

-----------------------------------------------------------------------------------------------------

EA License Number: 10C3636
EA Personnel Name: Vimmi Baunthiyal
EA Personnel Registration Number: R154398

Avensys is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail, and supply chain.

We are currently looking to hire DevOps Engineer.

This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

Job Type: One-year Renewable Contract

Job and Responsibilities: -

· Develop, maintain and administer tools which will automate operational activities and improve engineering productivity

· Identify industry best practices/solutions and pursue continuous improvement opportunities in SDLC / SDLC2 (Software Development Life Cycle) processes and practices, relentlessly drive for standardization, automation and self-services.

· Develop reusable, scalable, and testable automation scripts and tools for routine and repetitive tasks.

· Drive alignment efforts between development and operations teams to better recognize benefits of automation and cloud.

· Ability to research, propose and prototype new principles, technologies, tools and concepts and integrated them into the teams collective knowledge.

· Developing CI/CD roadmap and implementing to the projects. Help on AGILE/SCRUM Methodologies while execution.

· Manage and builds EAPI with Unit testing, Code Coverage, Enhancements. Same promote to Production through Jenkins CI/CD Pipeline.

· Configure OSS, Sonar, Fortify through continuous integration and commit based Scan for Quality Assurance. enable the automation testing and load testing.

· Automate continuous delivery and on-demand capacity management solutions

· Developing configuration and infrastructure solutions for internal deployments

· Troubleshooting, diagnosing and fixing software issues

· Updating, tracking and resolving technical issues

· Suggesting architecture improvements, recommending process improvements

· Evaluate new technology options and vendor products. Ensuring critical system security through the use of best-in-class security solutions

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression.

To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to [email protected]. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name: Preethi Kanthappan

Reg No: R1765546

Avensys Consulting Pte Ltd
EA Licence 12C5759

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' privacy policy.

Avensys is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail, and supply chain.

We are currently looking to hire DevOps Engineer.

This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

Job Type: One-year Renewable Contract

Job and Responsibilities: -

· Develop, maintain and administer tools which will automate operational activities and improve engineering productivity

· Identify industry best practices/solutions and pursue continuous improvement opportunities in SDLC / SDLC2 (Software Development Life Cycle) processes and practices, relentlessly drive for standardization, automation and self-services.

· Develop reusable, scalable, and testable automation scripts and tools for routine and repetitive tasks.

· Drive alignment efforts between development and operations teams to better recognize benefits of automation and cloud.

· Ability to research, propose and prototype new principles, technologies, tools and concepts and integrated them into the teams collective knowledge.

· Developing CI/CD roadmap and implementing to the projects. Help on AGILE/SCRUM Methodologies while execution.

· Manage and builds EAPI with Unit testing, Code Coverage, Enhancements. Same promote to Production through Jenkins CI/CD Pipeline.

· Configure OSS, Sonar, Fortify through continuous integration and commit based Scan for Quality Assurance. enable the automation testing and load testing.

· Automate continuous delivery and on-demand capacity management solutions

· Developing configuration and infrastructure solutions for internal deployments

· Troubleshooting, diagnosing and fixing software issues

· Updating, tracking and resolving technical issues

· Suggesting architecture improvements, recommending process improvements

· Evaluate new technology options and vendor products. Ensuring critical system security through the use of best-in-class security solutions

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression.

To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to [email protected]. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name: Preethi Kanthappan

Reg No: R1765546

Avensys Consulting Pte Ltd
EA Licence 12C5759

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' privacy policy.

An international company located in Singaporeis seeking an MLDevOps Engineer on permanent position.

The MLDevOps Engineer will focus on creating and testing innovative AI solutions aimed at improving software development productivity across the entire Software Factory. This role will be responsible for rapid prototyping, developing MVPs, and iterating on product prototypes to integrate AI effectively into our software delivery process. The ideal candidate is experienced in both MLOps and AI experimentation, with a keen focus on delivering solutions that facilitate code generation, quality assurance, testing automation, and continuous delivery.

Key Responsibilities

AI Use Case Development and Prototyping

• Develop and rapidly iterate on AI-driven prototypes that support and streamline developer workflows, including code specification, code generation, and testing automation.
• Collaborate with product and DevSecOps teams to identify high-impact AI use cases that improve software development and delivery efficiency.
• Drive proof of concept (PoC) initiatives, transforming experimental AI ideas into feasible and scalable solutions
• Implement automation to improve repeatability and reduce manual tasks in the development pipeline, such as auto-code generation, static code analysis, and intelligent error detection.
• Integrate automation tools that improve developer productivity, streamline testing, and optimize release cycles.
• Stay current with the latest advancements in Al and machine learning technologies.

MVP Development and Iterative Testing

• Build Minimum Viable Products (MVPs) for new AI solutions, focusing on quick deployment, testing, and user feedback.
• Establish efficient testing and evaluation frameworks to assess the effectiveness of AI models and rapidly iterate on improvements.
• Collaborate with developers and QA teams to integrate AI-based prototypes into the broader software lifecycle and measure productivity impact.

End-to-End ML Pipeline Development

• Design and deploy scalable ML pipelines tailored to rapidly evolving prototypes, with robust model training, testing, deployment, and monitoring processes.
• Manage versioning, model retraining, and performance tracking to ensure the continuity of high-quality AI solutions in the production environment.
• Collaborate with cross-functional teams to iterate on solutions based on developer feedback and usage data.
• Establish version control, deployment, and monitoring standards for ML models across the production environment.
• Develop tools and processes for A/B testing, canary releases, and other ML model rollout techniques.
• Ensure ML models are efficiently integrated within the internal Software Factory.

Collaboration with DevSecOps Team

• Work closely with DevSecOps engineers to integrate ML workflows with existing CI/CD pipelines.
• Enhance and support security measures for ML processes, ensuring compliance with DevSecOps policies and protocols.
• Write scripts and automate workflows to manage ML pipeline processes, ensuring faster, reliable, and secure model deployments.
• Integrate automation into DevSecOps workflows, ensuring repeatability and reducing manual intervention.

Documentation and Compliance

• Document AI use cases, PoCs, MVPs, and best practices for the integration of AI within the DevSecOps workflow.
• Create guidelines for evaluating AI model effectiveness, usability, and productivity impact.

Qualifications

Education and Experience

• Bachelor’s degree in Computer Science, Engineering, Data Science, or a related field (Master’s degree preferred).
• 3+ years of experience in MLOps, DevOps, or AI experimentation with a strong focus on rapid prototyping and MVP development.
• Strong understanding of DevSecOps practices, tools, and methodologies.

Technical Skills

• Proficiency in Python, Golang, Rust or other relevant languages.
• Experience with ML frameworks (TensorFlow, PyTorch, LangChain), deployment platforms (Kubernetes) and ML pipeline tools (Kubeflow, MLflow).
• Familiarity with CI/CD tools (GitLab CI)
• Knowledge of infrastructure-as-code (IaC) tools like Terraform.
• Understanding of data pipelines and tools (e.g., Apache Kafka, Spark) for data processing and transformation.
• Experience in developing Restful APIs for Al models.
• Good understanding of machine learning concepts, including neural networks, optimization algorithms, and evaluation metrics.
• Knowledge of Retrieval Augmented Generation (RAG) techniques.
• Familiarity with prompt engineering techniques like instruction design, template-based approaches, rule-based conditioning, or fine-tuning strategies.

Prototyping and Experimentation Skills

• Demonstrated experience in developing MVPs and iterating on product prototypes with quick turnaround times.
• Skilled in conducting PoCs and building scalable solutions based on experimental results and user feedback.
• Ability to work in a fast-paced, agile environment with a focus on continuous experimentation and learning.

Soft Skills

• Strong problem-solving skills and an innovative mindset geared towards improving developer productivity.
• Excellent collaboration and communication skills to work effectively across DevSecOps, product, and developer teams.
• Self-driven, adaptable, and capable of managing multiple AI-driven projects in a dynamic setting.

Preferred Skills

• Experience with AI models for code generation, automated testing, and intelligent debugging.
• Knowledge of security protocols and compliance measures for integrating AI within a DevSecOps environment.
• Experience with Agile methodologies.
• Familiarity with monitoring and observability tools (e.g., Prometheus, Grafana) and model explainability tools.

More openings at www.gasoil.com.sg

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 5 years’ experience or Diploma holders with 8 years’

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

About the Company

Our Client is an information technology service provider offering consulting, systems integration, maintenance and managed services to enterprise customers

Responsibilities

We are looking for a Network Engineer to design, deploy and maintain network infrastructure and solutions for clients in various industries.

• Design and implement secure networking solutions;
• Install, configure, and manage network devices;
• Troubleshoot escalated network issues and work towards effective resolution;
• Maintain detailed technical documentation for all network-related configurations and procedures;
• Monitor and enhance network performance, ensuring high levels of availability and stability;
• Drive improvements in scalability, capacity, security, and overall system efficiency;
• Support project deployment, ensuring successful implementation of network solutions.

Requirements

• Tertiary education in information technology or any relevant discipline;
• Certification in networking technologies would be an advantage;
• At least 3 years of experience in network infrastructure, ideally within a systems integration environment;
• Strong knowledge of wired and wireless network deployment and related technologies;
• Familiarity with routing and switching protocols and practices;
• Excellent organizational skills and the ability to prioritize tasks effectively.

Employment Details

• This is a 1-year renewable contract, convertible to permanent.

Get in touch with us

If you’d like to explore this opportunity, please reach out to Charmaine Tan (Regn No. R1102130) at [email protected] for a confidential discussion.

FCS CAREERS PTE LTD (EA 94C4359)

Data Protection Notice: By submitting any application or resume to us, you acknowledge that you have read, understood, and agreed to our Data Protection Policy (www.fcs-careers.com/about/data-protection), and that you consent to the collection, use and/or disclosure of your personal data by us for the purposes set out in the Policy. You may withdraw consent or make an access or correction request in respect of your personal data, however, depending on the nature or scope of such request, we may not be able to continue providing services to you. For any request, enquiry, or feedback, please contact our Data Protection Officer ([email protected]).

JOB DESCRIPTION

Commissioning and Trouble-shooting to the all kind of air- con system,(A.C.C.U, A.H.U, F.C.U, SPLI type , WINDOW type , PACKAGE type , AND CHILLER type) check the Electrical wiring diagram to the system.

Overhauling all kind of Compressor to the refrigeration system(Carrier (5f/5h series), Daikin(c55/c58/c74/c75 series),Sabroe(cmo 20, 30 /smc 100/bf series), Bock(f-series), York( ms/mrseries), Carlyle (06ea/06ed series), Bitzer.

Mitsubishi (MS/O6B Series) open type and semi-hermetic type).

Split type air condition installation and troubleshooting.

Package type air condition installation and trouble shooting.

Re-fabricate and modify the piping to the Condenser by brazing method.

Re-fabricate and modify the piping to the Evaporator coil & steam coil by brazing.

Retro-fittings to the refrigeration system as per Environmental free zone Freon gas.

Service report maintains, & Attendant customer feed-back.

JOB REQUIRMENT

Minimum Degree or diploma in Relevant Engineering.

Minimum 10 years of experience on the relevant field.

Must have good communication knowledge.

Must have pervious Singapore experience.

Must able to work in any shift or any timing slot.

As a DevOps Specialist, you will be required to:

• ​Work directly with clients Development team, product owner and various key stakeholders.
• Develop scripts and templates to automate infrastructure provisioning. ​
• Take ownership of end-to-end solutions provided by teams across the organisation. ​
• Provide system troubleshooting and problem solving across platform and application domains, expect to participate in on-call escalations to troubleshoot customer facing issues. ​
• Security and access control design IAM roles and utilize cloud native controls to meet security objectives and every infrastructure level and cloud services used. ​
• Capacity management and planning devise mechanisms to monitor and capture system. metrics and identifying potential bottlenecks at the infrastructure level. ​
• Assist in the migration activities for clients platform.

Qualifications:

• ​Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines. ​
• Passion for automation, standardization and best practices. ​
• Solid hands-on experience in designing, building, deploying and securing of highly available web application in cloud platform such as AWS, Azure or Google Cloud. ​
• Experience with Terraform, Atlassian JIRA, Confluence, Bitbucket and Bamboo. ​Experience in software-defined infrastructure (OpenStack, CloudStack, VSphere). ​
• Experience with infrastructure provision tools (Docker, Ansible, Puppet, Chef etc.). ​
• Network skills in firewall rules, load balancers, firewalls, VPNs, DNS. ​
• Basic understanding of DevOps principles and practices.
• Knowledge in DecSecOps will be an added advantage. ​
• Self-motivated and good communication skills. ​
• Experience in Agile development environment focusing on rapid quality delivery. ​
• High attention to detail, accuracy, meticulous to figures and processes in high agility environment.

Preference:

• ​Experienced with management cloud infrastructure and services / certification with GPC, GCC (i.e. AWS, Azure, Google Cloud) or equivalent cloud platforms will be preferred. ​
• Experience in one or more virtualization technologies (KVM, Xen, VMware, Hyper-V). ​
• Good understanding of the Linux operating system. ​
• Good understanding of Infra-as-code and Policy-as-code.

Role Overview

• Reports To: Project Manager
• Objective: Collaborate with Application and Infrastructure Teams to set up and configure infrastructure and applications in the OpenShift Container Platform (OCP).

Responsibilities

• Coordinate infrastructure setup and support application infrastructure requirements.
• Work with the application team to set up, migrate, and test applications from VMs to OCP.

Qualifications

• Proficiency in Red Hat OpenShift (OCP) Development & Architecture.
• Knowledge of Linux OS & MariaDB.
• Experience in Java Development, Shell Scripting, and DevOps.
• A minimum of 5 years of professional experience, with 3 years in a relevant field.
• Ability to work shifts, including weekends.

Strong interpersonal skills and the ability to work independently

Must meet the following criteria:

1)Degree and qualifications in related field.

2)Must be able to speak and understand English so as to communicate with the team members.

3)Must be able to lead a groups of worker.

4)Must be a good leadership.

5)Must be able to coordinate workers and projects.

6)Must be able to work under tight deadlines.

Purpose: Provide the fabrication steps & process time to calculate the cost of the part. This includes assessing whether the design provided is machinable, the availability of machines or tools to support the requirements and proposing cost-efficient methods.

Key Areas of Responsibility:

• Provide machining process steps for quote submission to determine process cost calculation.
• Review the part drawings & specifications provided and consider the critical dimensions or process.
• Identify machining issues and provide Design for Manufacturing (DFM) slides to highlight issues; present an alternative proposal when possible.
• Generate a drawing/list of the requirements before sending the Request for Quote (RFQ) to suppliers.
• Inform suppliers of requirements & stipulate a cost breakdown list. Ensure that suppliers meet the specified timeline.
• Provide Part Cost estimation for Outsource Build to Print (BTP) parts for the Commodity team to use as a price reference.
• Mentor new hires on operations and part calculation processes to ensure they receive the information and guidance needed to perform their jobs effectively.
• Support and participate in company continuous improvement program.

Qualifications & Experiences:

• Nitec/Dilpoma/Degree in Mechanical Engineering or relevant field.
• Minimum 1 year of working experience in the Semiconductor or High precision equipment industry, with relevance to costing will be an advantage.
• Knowledge of Solidworks or other computer-aid design software.
• Application of measuring equipment and techniques
• Knowledge of geometric dimensioning and tolerancing

This is a permanent role for a regional company working in the infrastructure construction company. The incumbent must be willing to work on Jurong Island.

Must be hands-on Primavera P6

• Degree or equivalent in Civil/Mechanical engineering

• Minimum 4 years in Oil & gas, Process/chemical plant EPC projects experience

Philips is a global leader in health technology, committed to improving billions of lives worldwide and striving to make the world healthier and more sustainable through innovation. Driven by the vision of a better tomorrow.

But it’s not just what we do, it’s who we are. We are 80,000, wonderfully unique individuals, with two things in common. An unwavering sense of purpose and a relentless determination to deliver on our customers’ needs. It’s what inspires us to create meaningful solutions – the kind that make a real difference – when it matters most.

The world and our customers’ needs are changing faster than ever before and while we are proud of what we do already, we know we can do more. That’s why we need you, to help us tackle increasingly complex challenges posed by ever evolving health and well-being needs.

In this role, you have the opportunity to make life better

Looking at the challenges the world is facing today Philips’ purpose has never been more relevant. So whatever your role, if you share our passion for helping others, you’ll be working towards creating a better and fairer future for all.

• Monitor market trends and competitor activities to refine strategies and maximize engagement identifying critical enablers for success for the region
• Collaborate closely with the sales and product teams to align marketing efforts with business goals and client needs.
• Use market intelligence to identify areas to focus sales activities, potential disruption and opportunities to increase impact in the field.
• Design and execute tactical marketing initiatives like campaigns, promotions and activation leveraging data based insights. Create, launch and manage targeted sales promotions with your regional teams.
• Use assets to sell the story, identify what proof points and points of engagement are important at each stage of the process and drive implementation and execution for your region.
• Enable the sales team to be effective with sales assets, messaging, targeting and engagement.
• Develop, maintain and distribute competitive intelligence.
• Measure performance and impact with data and analytics
• Be the region "go-to" for support and escalation.
• Build a tender database for faster and more consistent response for your region.
• Work across the CT Product Management and Marketing team to represent the voice of sales for your region.

You're the right fit if:

• Bachelor’s degree or equivalent work experience (must)
• > 5 yrs related experience in Field Marketing or adjacent fields (e.g. Product Marketing, Clinical Marketing, Marketing Communications)
• Ability to synthesize market and customer feedback and existing and new products into targeted campaigns, promotions and marketing strategies; comfortable with making tradeoffs, decisively
• Excellent communication skills with a talent for building strong professional relationships and ability to influence colleagues.
• Ability to lead an organization in the development and implementation of region-specific Go-to-Market strategies.
• Experience in high-tech, healthcare/med-tech solutions businesses in B2B environments
• Knowledge of commercial and marketing processes, planning and budgeting
• Understanding of area of specialization; resolves a wide range of issues in creative ways
• Ability to manage multiple projects independently and effectively.
• Analytical mindset with a focus on delivering measurable results.
• MBA desired in related field (optional)

About Philips
We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others.
• Learn more about our business.
• Discover our rich and exciting history.
• Learn more about our purpose.

If you’re interested in this role and have many, but not all, of the experiences needed, we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our commitment to diversity and inclusion here.

We are seeking a talented and motivated Software Engineer to join our dynamic team. In this role, you will contribute to the development and enhancement of cutting-edge software solutions tailored for high-tech products in the semiconductor manufacturing industry. Collaborating closely with the Software Manager and an Agile Scrum team, you will be instrumental in designing, implementing, and optimizing robust software applications that integrate seamlessly with advanced hardware systems.

Key Responsibilities:

• Design, develop, and enhance software architecture for scalable, high-performance applications.

• Integrate hardware control systems and sensor data acquisition modules into the software platform.

• Work closely with team members in a Scrum environment, reporting progress to the Software Manager.

• Write, debug, and maintain high-quality source code, and conduct comprehensive unit testing to ensure software robustness.

• Present developed features to stakeholders, including team members and product managers, and incorporate feedback for continuous improvement.

• Provide technical support and on-site debugging to resolve issues as needed.

Requirements:

• Bachelor’s, Master’s, or Ph.D. in Computer Science, Computer Engineering, Electronics, Automation, or a related technical field from a recognized institution.
• At least 5 years of hands-on programming experience in C#, .Net/WPF, and C++ on the Windows platform.
• Proven expertise in object-oriented design patterns for scalable, high-performance software applications.
• Significant experience in integrating commercial system software with hardware in production environments.
• Proficiency in multithreading technologies.
• Experience with digital data acquisition and data processing using high-speed digitizer cards, frame grabbers, or similar technologies.
• Familiarity with capital equipment especially defect inspection and metrology machines.
• Experience in factory automation and MES development is highly advantageous.
• Prior experience working in Scrum Agile development teams is preferred.

If you are passionate about developing innovative software solutions, thrive in a collaborative environment, and aspire to make an impact in the semiconductor manufacturing industry, we invite you to be part of our team. Take this opportunity to shape the future of high-tech solutions with us!

Job Description

• Develops and manages new designs in accordance with project requirements and objectives, while adhering to project milestones and schedule.
• Conduct feasibility studies, FMEA, cost analysis and material selection to support design decisions.
• Collaborate closely manufacturers, and suppliers to address technical challenges through DFM & DFA and ensure successful implementation of designs.
• Prepare and present design proposals, progress reports, and project updates to stakeholders, while abiding to timely delivery within project’s budget.
• Utilizes SolidWorks software to generate detailed 3D models and technical drawings for prototypes and production.
• Setup test plans using DOE methodology, analyze test results and iterate design to meet performance and quality standards.
• Participate in team design reviews, providing constructive feedback and contributing to continuous improvement initiatives.

Job Requirements

• Bachelor’s Degree in Mechanical/Material Engineering is required.
• Min 3 years’ design experience in a product development environment, contributing to a product’s successful delivery into series production will be preferred.
• Proficiency in CAD software for 3D modeling and technical drawings, SolidWorks knowledge will be preferred.
• Strong understanding of materials and manufacturing processes. Knowledge in machining, metal forming, heat treatment and casting are preferred.
• Knowledgeable in design principles, such as springs, bearings and hydraulics, and in theoretical calculations related to the field of statics, dynamics and kinematics.
• Keen interest and experience in a hands on approach towards the construction of prototypes and testing.

• Basic $4000 - $5200 + Variable Bonus + Allowances
• Excellent Welfare and Benefits + Career progression
• Working location: West / Northeast (Both location available)
• Working hours: 8:30am – 5:30pm (Mon – Fri)
• BMS (Building Management System) // ACMV // Control Valve
• Mechanical Engineering - Training Provided

Job Responsibilities:

Liaison with Subcontractors:

• Coordinate with subcontractors for project updates and service execution, ensuring alignment with technical specifications.
• Monitor subcontractor performance to uphold quality and safety standards.

Client Interaction:

• Serve as the primary contact for clients regarding service inquiries and project progress.
• Attend client meetings to discuss project requirements, timelines, and address any concerns.

Project Management:

• Track and manage service projects, ensuring timely delivery and adherence to client specifications.
• Assist in preparing and submitting project documentation, including service reports and compliance materials.

Coordination of Meetings:

• Organize and participate in internal and external meetings to discuss project status and resolve issues.
• Prepare agendas and meeting notes, ensuring effective communication among stakeholders.

Documentation and Reporting:

• Maintain accurate records of project activities, subcontractor communications, and client interactions.
• Generate regular progress reports for management and stakeholders.

Continuous Improvement:

• Identify opportunities for process improvements in service delivery and communication.
• Collaborate with team members to implement best practices, enhancing operational efficiency and customer satisfaction.

Requirements:

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• Training will be provided for candidate without or with lesser experiences

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Title: Software Engineer / Senior Software Engineer (Machine Vision)

Job Description:

We are seeking a talented and motivated Software Engineer to join our dynamic team. In this role, you will contribute to the development and enhancement of cutting-edge software solutions tailored for high-tech products in the semiconductor manufacturing industry. Collaborating closely with the Software Manager and an Agile Scrum team, you will be instrumental in designing, implementing, and optimizing robust software applications that integrate seamlessly with advanced hardware systems.

Key Responsibilities:

• Research and develop cutting-edge algorithms for image processing, machine learning, and deep learning.

• Implement, integrate, and optimize these algorithms in mission-critical software to leverage high-performance hardware.

• Work closely with team members in a Scrum environment, reporting progress to the Software Manager.

• Write, debug, and maintain high-quality source code, and conduct comprehensive unit testing to ensure software robustness.

• Present developed features to stakeholders, including team members and product managers, and incorporate feedback for continuous improvement.

• Provide technical support and on-site debugging to resolve issues as needed.

Requirements:

• Bachelor’s, Master’s, or Ph.D. in Computer Science, Mathematics, Digital Signal Processing, or a related field from a reputable institution.
• At east 5 years of experience developing, implementing, and integrating algorithms in image processing and deep learning.
• Skilled in programming in C# or C++ (minimum 5 years in at least one language) and Python.
• Familiarity with prevailing AI development environments, model training tools, open-source neural networks, and inference technologies.
• Solid understanding of machine vision technologies.
• Familiarity with capital equipment especially defect inspection and metrology machines.
• Expertise in GPU acceleration programming (CUDA) is highly valued.
• Familiarity with working in Scrum Agile development teams is preferred.

If you are passionate about developing innovative software solutions, thrive in a collaborative environment, and aspire to make an impact in the semiconductor manufacturing industry, we invite you to be part of our team. Take this opportunity to shape the future of high-tech solutions with us!

As an Engineer of MSB Lean Manufacturing, you will manage the implementation of Lean transformation methodologies and tools in Assembly, Test and SSD manufacturing at MSB. You will collaborate closely with site functional teams to identify, explore and implement lean methodologies and tools to drive improvements in throughput, labor productivity, yield, and cycle time performance.

Responsibilities:

• Lead the adoption and implementation of Lean methodologies and tools across Assembly, Test, and SSD manufacturing.
• Facilitate continuous improvement events across different functional teams (e.g., Kaizen, Value Stream Mapping (VSM), Projects, Workshops).
• Develop and sustain programs and systems to foster a Lean culture.
• Conduct labor productivity analyses (e.g., Touch-time, MMR, spaghetti charts) to enhance operator and technician efficiency and reduce operational errors.
• Oversee Utilization/ Overall Equipment Effectiveness (OEE) to identify key sources of losses and improvement opportunities.
• Collaborate with functional experts to identify areas for improvement through the application of Lean methodologies and tools.
• Propose Lean approaches and initiatives, including Kaizen and Continuous Improvement Projects.
• Act as the key integrator between central and site functional teams, developing, driving, and communicating progress on critical Lean improvement initiatives.
• Develop an overall view of critical initiatives and their impact on key performance indicators.
• Provide visibility on program status, including key achievements with clear ownership.
• Trigger interventions to ensure programs stay on track towards targets.
• Support regular reporting and meetings with senior leadership, including deep dives for weekly/monthly reports and ad-hoc senior management updates.

Requirements

• Bachelor’s /master’s in Industrial and system engineering, engineering management, Production & Operation Management, or related field.
• > 2 years of experience in Overall Equipment Effectiveness (OEE) and/or Lean manufacturing fundamentals in the semiconductor industry
• Strong project management, analytical skills and problem solving skills
• Possess good communication and interpersonal skills, with the ability to work effectively with multiple multi-functional teams.
• Knowledge of Semiconductor processes, engineering and/or manufacturing operations

Keen on the role? Apply now!

• Well Established Company
• Basic $4000 - $5200 + Variable Bonus + Allowances
• Excellent Welfare and Benefits + Career progression
• Working location: West / Northeast (Both location available)
• Working hours: 8:30am – 5:30pm (Mon – Fri)
• DCS | PLC | SCADA | Harmonas Programming
• Training Provided

Job Responsibilities:

• Plan, design, and configure control systems for a variety of applications, ensuring seamless integration with Building Automation Systems (BAS), Distributed Control Systems (DCS), SCADA, and Programmable Logic Controllers (PLC)
• Create detailed control schematics and field termination drawings, ensuring accurate design documentation for system installation
• Set up and configure system databases, prepare control descriptions for Testing and Commissioning (T&C), ensuring all configurations are optimized for performance.
• Lead Factory Acceptance Testing to verify system functionality, compliance with project requirements, and quality standards.
• Provide hands-on support during installation, commissioning, and start-up phases. Troubleshoot, repair, and calibrate systems on-site to ensure optimal performance.
• Conduct in-depth troubleshooting and fault diagnosis across systems such as DCS, PLC, BAS, and SCADA to resolve issues and maintain smooth operation.
• Perform system testing, calibration, and fine-tuning to ensure systems operate at peak performance and meet specified requirements.
• Work closely with project managers, designers, and engineers to ensure projects are executed smoothly and on time. Communicate technical requirements and solutions effectively to clients and stakeholders.

Qualifications & Experience:

• Bachelor’s Degree in Electrical Engineering, Control Systems, Automation, or a related field.
• Proven experience in system configuration, design, and commissioning of DCS, PLC, BAS, and SCADA systems.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

• 5 days work week
• Location: Toa Payoh
• 2 years' contract
• Basic up to $5000

Key Responsibilities

• Setup and optimize applications and databases to meet project requirements.
• Analyze, review, and suggest software application improvements to support new services.
• Collaborate with software development teams, clients, and users to boost application performance.
• Administer applications, including user account management and configuration.
• Develop and execute comprehensive Test Plans and User Acceptance Tests (UAT).
• Prepare detailed UAT reports and maintain configuration records.
• Investigate and resolve production issues, liaising with vendors as needed.
• Manage application migrations and rollouts for new releases.
• Monitor and document application performance metrics.
• Develop tools to assist L1/L2 teams in their investigations.

Technical Expertise:

• Solid understanding of CCTV/networked camera systems and IoT management applications.
  Proficient in application design, analysis, and technical documentation.
  Knowledge of Video Management products and network fundamentals (TCP/IP, DNS, DHCP, etc.).
  Hands-on experience with Golang, Node.js, JavaScript, Windows Server OS, CentOS, Ubuntu OS, and MongoDB.
  

Education & Experience:

• Bachelor’s Degree in Computer Science, IT, or Software Engineering.
  Relevant working experience in video and IoT management applications, software analysis, and design.
  

To Apply, kindly click on the "APPLY NOW" button.

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)