Responsibilities:

• Oversee the construction activities and progress, plan, implement, and monitor work
• Schedule following the master and detailed work program
• Liaise with a Professional Engineer on the Temporary works
• Liaise with consultants (QPS) for technical issues and coordinate the site activities with subcontractors
• Handle technical and engineering problems
• Guide supervisors about construction works, ensure progress according to schedule,
• Maintain quality standards, carry out site inspections and resolve technical issues on time
• Prepare report and method statement whenever necessary
• Manage and control workers and monitor their work closely to keep the site safer and neat
• Supervise ongoing site activities closely

Requirements:

• Diploma in Civil Engineering or equivalent
• must have Lifting Engineer Certification for a Senior role
• Experienced in Singapore underground project, D/wall, and other structural works
• Minimum 2 years of relevant experience in LTA Project is preferred
• willing to work 6 days and/or 5.5 days per week

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Good interpersonal and communication skills

Job Description:

• Lead metal Additive Manufacturing process, materials and application development and service projects, including material selection, part design, parameterization, prototyping and manufacturing of AM parts
• Scoping, managing, and executing of customer projects within budget and schedule, ensure deliverables, objectives and customer requirements are met
• Provide technical consultation and support to customer enquiries relating to metal AM application
• Operation of metal AM machines and auxiliary equipment, including maintenance, troubleshooting, risk assessment, and managing of AM lab
• Documentation of project reports, engineering reports, technical data, process know-hows; development of SOPs and best practices for AM equipment and processes
• Support market promotion and customer engagement; participate in local or overseas industry exhibitions, tradeshows, conferences, and seminars; facilitate lab tours, demos and presentations
• Provide technical content to support creation of marketing collaterals such as demo parts, product videos, whitepaper, etc.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers
• New hire is required to undergo specific tests for who are exposed to certain occupational hazards.

Requirements:

• Bachelor's Degree / Master / PHD in Engineering, Mechanical, Materials, Aerospace or equivalent
• Min 5 years of working experience with metal Additive Manufacturing process and application development
• Hands-on experience with LMD/DED machine operation
• Proficient in data preparation, CAD/CAM and toolpath generation for LMD/DED process
• Strong understanding of LMD/DED process, materials, and key process variables
• Experience with parameters development, material characterization, or process simulation
• Familiar with metal AM process chain
• Keen on hands-on work
• Fast learner and agile, able to adapt to dynamic work environment
• Able to work independently and self-motivated

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

Responsibilities

• Undertake detailed design in Building Structures
• Execution of projects and liaison with the Client, Client’s Consultants, Contractors, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Prepare design report & attend meeting to resolve technical issue

Requirements

• Degree in Civil and Structural Engineering or its equivalent that is recognized by the Professional Engineers Board of Singapore
• Well versed with local authority codes and regulations
• Minimum 4 years of relevant building structure with civil experience
• Involve in large scale building (HDB/ Condominium/ Commercial) structural design project
• Good exposure in the analysis and design of PPVC, Precast and concrete structures, steel structures
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings, and other documents prepared for the different stages of a project.
• Supervise the installation, testing, and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Correspond with project experience acquired and individual competency in technical knowledge/skills, project management, and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognized by the Professional Engineers Board, Singapore
• Registered with the Professional Engineers Board, Singapore.
• Minimum 3 years of relevant experience in Mechanical engineering design for building services and infrastructure works. Those with more than 5 years of relevant experience may considered for a Senior role.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational, and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You are responsible for identifying, assessing and advising on risks arising from the workplace health, environmental and/or work processes, recommending measures to eliminate or minimize and control the risks and implementing the measures.

Key Responsibilities

• Conduct job and environment hazard and risk assessments, perform workplace evaluations, and implement corrective and preventive actions
• Apply relevant licenses, conduct tests and provide necessary inspection reports on environment and safety to drive improvement
• Lead and continually review existing and new Fab processes and equipment for EHS compliance, including managing waste, air, water, chemicals, gas and others
• Manage semiconductor process safety, establish Environment, Health and Safety (EHS) culture, implement and enhance the EHS program for employees and contractors
• Perform regular and ad-hoc inspections. audits and supervise hazardous operations safely
• Lead and facilitate ERC (Emergency Response Committee) related activities such as factory emergency response, fire, gas leak and others
• Collaborate with relevant departments for ISO14001, ISO45001, ISO14064, and ISO50001 management systems certification and compliance
• Provide technical, regulatory and process guidance to address emerging EHS issues

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Engineering or Science background including Occupational Safety, Chemical Engineering or Chemistry, environmental science and emergency response or management
• Minimum of 3 years of experience in semiconductor, electronics manufacturing, or other chemically intensive manufacturing industries and regulatory compliance preferred.
• Possess industrial safety, environmental protection, and fire protection related certificates
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months

Key Skills and Attributes

• Strong analytical skills and able to work under pressure in a fast-paced environment
• Good interpersonal, leadership and communication skills to work effectively across functions and geographical teams with diverse background
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

Responsibilities

• Assist/support Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements;
• Understand the contract and scope of work for topsides with sub-contractor;
• Prepares key project documentation as per project specification requirements;
• Manages project topsides related drawings and controls technical documentation across disciplines;
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget;
• Assist topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assist topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Support topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Review & comment the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables;
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull;
• Co-ordinate between discipline to utilize the shared license based-on work priority;
• Monitor & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer;
• Record & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager;
• Expedite the information required by each discipline prior to start & complete the topsides design works;
• Monitor 3D model clashing issues with other discipline;
• Prepare Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM;
• Lead topsides design review activities either internally with other discipline or externally with other parties (include client);
• Initiate, organize, participate, record & file the minutes of meeting with external parties (include client) for topsides design related activities;
• Prepare, update & monitor the topsides design Punch List & Hold List on weekly basis, especially related to external parties (include client);
• Support Project Planner in preparation of monthly or weekly report to client related to topsides design progress & status;
• Support Topsides Engineering Manager/Engineering Project Manager & commercial team for VO related to topsides design;
• Responsible for ensuring that all topsides design activities meet work scope & comply with Project Quality Plan.
• Liaises with Construction & Commissioning Team to ensure topsides design activities are in-line with Area or System Completion Priority.
• Understand and monitor all interfaces with Class Society (if topside is classed) / other regulatory bodies and Clients to ensure requirements are properly addressed and relevant documents are reviewed timely.
• Assist topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering;
• Minzmum 10 years working experience in offshore oil and gas project managing topsides design works;
• Able to liaise with internal and external parties;
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design;
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MECHANICAL ENGINEER/ SENIOR ENGINEER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be responsible for HVAC systems, Clean Room, Building services and maintenance.

What you will be working on:

• To provide facilities support pertaining to Clean Room, Chillers and HVAC systems, Environmental Protection Systems, Process Utilities Supply Systems, Building Services and Maintenance, and other miscellaneous mechanical and facilities systems to wafer fabrication so as to ensure continuous supply of utilities and related facilities at the required performance level or specifications
• Formulate, implement, review and improve preventive and predictive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time. Carry out root cause analysis and implement action plans to prevent recurrence
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Formulate, implement, review and improve operating procedures so as to ensure optimum operation of systems
• Monitor and review utility consumptions and work with users to implement projects to reduce the consumption where possible
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance
• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup
• Ensure plant histories, drawings, data and other appropriate documentations are being generated and properly filed for future reference and review.
• Evaluate and recommend appropriate spares, consumables and other resources necessary for the day-to-day operation of the systems.
• Conduct project supervisions.

More About You:

• Master / Degree in Science, Mechanical Engineering, Building or equivalent. Preferred candidate with SCEM certification.
• 5 years of relevant working experience in semiconductor, pharmaceutical or petrochemical industry. Hands-on experience in day to day operation and maintenance essential.
• Experienced in managing cleanroom (Class 100 environment) systems
• Person shall act as SME for ACMV system. Person must have sound knowledge of operation and maintenance of Clean room areas and ACMV system
• Provide building services and maintenance, including building facilities repair and upgrading, housekeeping, landscaping and pest control.
• Knowledge of maintenance principles and good engineering practices.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible for successful customers’ product full lifecycle, including but not limited to, technology transfers, new products introduction, device performance, yield, and reliability of our advanced technologies

Key Responsibilities

• Take charge for successful new products qualification and technology transfers from motherfab
• Complex data analysis to identify process design weaknesses and/or manufacturing tool issues.
• Design and execute experiments, analyse complex data sets and derive actionable insights to improve yield and performance for each specific technology and/or products
• Collaborate with the engineering teams to maintain process stability and provide technical solutions to customers

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 4 years of experience in silicon process flow enhancements and managing process shifts, changes with design rules and product layout, ensuring optimal yield, electrical test and product performance with short-and long-term reliability implications considerations
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

Job Highlights:

• Working with world's leading company in SMT / PCB / semiconductor industries.
• Attractive salary package: AWS, variable bonuses, comprehensive medical coverage.
• Career growth opportunities with trainings provided.

About the Company:
Our client is a global technology company and a market leader that develops and provides leading-edge solutions in surface mount technology, equipment and materials for the semiconductor assembly and packaging industries.

Role Overview:
Join our client's dynamic team as a Software Engineer or Senior Software Engineer, where you will develop and manage cutting-edge solutions for SPI, factory line systems, and associated modules. The role demands technical expertise, creativity, and a strong focus on quality to deliver scalable and maintainable software solutions. Senior candidates will additionally lead complex design tasks, mentor junior engineers, and drive innovation in a competitive landscape.

Key Responsibilities:

• Design, develop, and maintain software solutions for SPI and factory line systems, focusing on quality and scalability.
• Provide effective solutions for production units and address customer requirements with a balance between functionality and time-to-market.
• Solve complex engineering problems using innovative approaches and technical analysis.
• Conduct technical reviews and provide evidence of appropriate solutions to customers.
• Stay updated on industry trends through continual professional development.
• Guide junior team members (for Senior roles) and support their growth.
• Perform any additional ad-hoc duties as assigned.

Requirements:

• Bachelor/Master Degree in Engineering or a related discipline.
• A minimum of 3–5 years of relevant working experience, depending on the role.
• Strong experience in software design, analysis, and validation of engineering requirements.
• Proficient in C++, UML, and the appropriate usage of design patterns.
• Familiarity with Source Control Systems, Visual Studio, and Software Development Lifecycle.
• Knowledge and experience in hardware systems, real-time control systems, Unit Testing, Dependency Injection, and WPF are advantageous.
• Demonstrated ability to balance functional design with time-to-market considerations while maintaining scalability and maintainability.
• Senior candidates should have experience mentoring junior engineers and leading complex software design tasks.

How to Apply:

Interested candidates, please submit your updated resume by using Apply button

**We regret to inform that only shortlisted candidates will be informed.**

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Engineer/Engineer to be part of our Product Engineering diverse team of talent. You will be responsible for yield, quality and reliability issues of devices.

What you will be working on:

• Resolve yield, quality and reliability issues in the qualification of new devices
• Perform pre-tapeout risk assessment and communication with Business line/ Fab on the necessary actions to eliminate/ minimize risk
• Conduct product yield analysis to identify root causes of wafer sort and final test failures
• Work with Customers and Account Managers to maximize die output
• Establish product low yield criteria and dispositioning
• Provide product engineering support to failure analysis lab for electrical fault isolation
• Provide product engineering support to reliability lab to understand and resolve reliability failures
• Compliance to safety, discipline and housekeeping rules
• Support cost reduction through yield improvement and resolving excursion
• Participate in continuous yield and productivity improvement projects

More About You:

• Bachelor's Degree in Engineering (Electrical/Electronic) or equivalent
• 2 years of relevant product engineering experiences in front-end wafer fab environment or
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical and problem solving skills
• Good communication and interpersonal skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities:

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control

· Develop & review electrical related drawings, e.g. Single Line Diagram, MCC Schematic, Equipment layout, Cable ladder/tray routing layout

· Knowledge in Onshore/ Offshore standards (IEC, NEMA, IEEE & API)

· Prepare Electrical Load Analysis & List

· Familiar with Short-Circuit and Voltage Drop calculation

· Prepare & review Electrical MTO for projects

· Review Electrical equipment’s datasheet

· Strong knowledge in Low voltage MCC/Switchgear, UPS, VSD/VFD & Transformers

· Prepare specification for LV Switchgear, MCC, Transformers & VSD/VFD’s

• Reviewing of customers' specifications and drawings
• Define specifications and scope of work to contractors
• Execution of projects.
• Startup, testing, commissioning and troubleshooting of plants.
• Develop engineering capabilities and work with sales team on project proposal and bidding

Requirements:

• Degree in Electrical Engineering or equivalent recognized by Professional Engineers Board (PEB) Singapore
• Able to read & understand line diagram and generate Bill of Materials from single line diagram
• Knowledge on control, schematics, motor controls and materials take-off
• Proficient in AutoCAD, Microsoft Office
• Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage
• Able to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / vision
• Able to communicate effectively in English at all levels, both verbally and in written reports

An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate. We regret only shortlisted candidate will be notified.

• 5+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

Job Title: Contract Execution Engineer

Job Description:
We are looking for a dynamic and results-driven Contract Execution Engineer to oversee the execution of contracts, negotiate vendor agreements aligned with the scope of work, and lead a team to ensure the timely and successful completion of projects. This role demands a professional with strong leadership skills, excellent negotiation abilities, and a focus on delivering quality outcomes.

Key Responsibilities:

1. Contract Execution:Execute contracts in accordance with agreed terms, conditions, and the defined scope of work.
   Monitor adherence to contractual obligations, ensuring compliance with company policies and industry regulations.
   Collaborate with internal teams to align project deliverables with contract requirements.
   Proactively address and resolve any issues or disputes that arise during the execution phase.
   
2. Vendor Negotiation:Negotiate terms with vendors and suppliers to finalize contracts that align with the project scope, budget, and timeline.
   Evaluate vendor proposals for technical, financial, and operational suitability.
   Build and maintain strong relationships with vendors to support project goals and future collaborations.
   
3. Team Supervision and Leadership:Lead, mentor, and supervise a multidisciplinary team to achieve project objectives.
   Delegate tasks effectively and ensure team members have the necessary resources and support.
   Foster a positive work environment that encourages collaboration, innovation, and accountability.
   
4. Project Management:Ensure projects are completed on time, within budget, and to the desired quality standards.
   Develop and monitor project schedules, identifying potential delays and implementing corrective actions.
   Track project progress, prepare status reports, and present updates to management.
   
5. Leadership and Problem-Solving:Exhibit strong leadership skills, motivating and guiding the team through challenges.
   Make informed decisions to resolve issues while balancing project goals and stakeholder expectations.
   Drive continuous improvement initiatives within the team and project workflows.
   
6. Qualifications:

• minimum O level with advanced certificate in work place safety and health, safety coordinator, other construction and process related safety certificates.
• Proven experience in contract management, vendor negotiations, and team leadership.
• Excellent leadership, organizational, and decision-making skills.
• Proficiency in project management tools and contract management software.

Mon to Fri: 9am to 5:30pm

Objective:

We are looking for a Field Application Engineer to drive new projects and business pipelines for FY24 growth.

Responsibilities:

• Responsible for pre & post sales requirements of Company’s Power Quality products (preparing technical documents & commercial proposals)

• Provides technical support to distributors and key account customer for troubleshooting, on-site testing and commissioning

• Provides trainings to distributors and customers to enhance their capabilities

• Responsible for design-in (spec-in) of company’s products with the distributor in the appointed territory and market segments, achieve yearly design-in targets

• Lookout for opportunities to cross out competitor part

• Coordinate PQ Application and On-site Measurement Services in line with the company strategy

• Maintains good relationship with both end-users, local distributors, external test laboratories and build customer loyalty through field visits

• Maintenance of existing customers base and achieve development of new potential customers.

• Effective use of CRM/CAS system to record key activities, including customer visit/call reports and opportunities

• Able to communicate and work well with internal departments.

• Any other responsibilities as assigned by the Strategic Account Manager or/and Sales Manager

Job Requirements:

• Possess fundamental PQ Harmonic knowledge and application.

• Basic knowledge of EMC / EMI compliance is a plus

• Bachelor’s degree or equivalent in Electrical/Electronics/Mechatronics Engineering or other relevant majors

• Prefer minimum 3 years technical experience in the field of industrial products

• Able to operate common test equipment like voltage meter, clamp meter, oscilloscope, analyzer, etc.

• Good interpersonal and communication skills

• Well-versed in basic MS Office tools (eg. Word, Excel) and SAP (preferred)

• Interpersonal savvy

• Good follow up and consultative approach attitude

• Able to work independently and resourceful

What we offer:

• Attractive remuneration and incentive package

• Annual leave, medical welfare and insurance

• Provide opportunities for career advancement within the company

• The Field Service Engineer provides direction and assistance to work group in order to meet assigned objectives. In this role you will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning
• Provide general technical direction and assistance to the customer in the operation, maintenance, repair, logistic support, and installation of Veolia’s products
• Provide on-site interpretation of data and technical instruction
• Provide Project and Field Service management with complete and prompt information regarding status of programs, customer problems, failures and trends.
• Provide technical assistance through on-site guidance and training in proper operation, maintenance, and troubleshooting of assigned programs and ground support equipment, including the use and proper interpretation of data and technical instructions
• Provide communication to Product Support and Field Service regarding all program activities and problems through regular, timely reports
• Review reported malfunctions and identify / analyze any undesirable trends
• Make recommendations on findings
• Review effectiveness of maintenance actions in order to identify training needs
• Be one of the focal points for assigned account for all matters concerning Veolia products and services and total support, ensuring that both customer and Veolia objectives are met
• Developing and maintaining a customer preference relationship toward Veolia
• Execute value generating plans and coordinate both internally and externally with the customer
• Outlining, presenting and selling the value of Veolia products and services that can benefit customer needs
• Ensure that all the KPIs set by customer are met
• Ensure customer satisfaction by providing high service standards.

Requirements:

• Diploma or Degree in chemical, environmental engineering. Chemistry or equivalent knowledge and experience are welcome.
• Those with experience in water treatment & field service in chemical industry, will be an added advantage.
• Able to work well and excel in a team. Demonstrates leadership qualities.
• Strong communication skills (both written and verbal)
• Possess valid class 3 driving license.

Responsibilities:
1. Customer Service:

• Ensure a high level of customer satisfaction by delivering excellent support services.
• Act as a point of contact for escalated customer inquiries, maintaining a professional and customer-focused approach.
• Build and maintain excellent relationships with end-users, understanding their technical needs and preferences.
• Gather feedback from users to identify areas for improvement and implement solutions to enhance the overall user experience.
• Conduct user training sessions to promote self-service options and empower users to resolve common issues independently.

2. Technical Support:

• Identification and resolution of hardware and software issues for end-users, both onsite and remote.
• Serve as an escalation point for complex technical problems, ensuring timely and effective solutions.
• Collaborate with other IT teams within the organization (Infra, Network and App) to address and resolve technical issues.
• Oversee the development and maintenance of standardized laptop images for various user profiles.
• Deployment of laptops to new and existing users ensuring consistency, security, and compliance with organizational standards.
• Design and implement efficient processes for onboarding new employees, including laptop setup, account provisioning, and orientation on IT policies.
• Streamline and execute offboarding procedures, ensuring secure data removal, account deactivation, and retrieval of IT assets.
• Ability to analyze issues related to Microsoft 365 applications.
• Having knowledge to troubleshoot Wi-Fi or Network related issues.
• Possess expertise in diagnosing and resolving printer-related issues, including hardware malfunctions, connectivity problems, and print queue management.
• Develop and implement preventive and corrective maintenance strategies to optimize printer performance and minimize disruptions.
• Collaborate with vendors for escalated printer issues, warranty claims, and hardware replacements.

3. Documentation and Reporting:

• Maintain accurate records of support activities, including incident reports, service requests, and resolutions.
• Generate and analyse performance reports to identify trends and areas for improvement.

Qualifications:

• Bachelor’s degree in information technology, Computer Science, or related field (or equivalent work experience).
• Proven experience in a technical support role, with a minimum of 3 years in a leadership or supervisory position.
• Excellent knowledge of desktop operating systems, hardware, and software applications.
• Excellent troubleshooting and problem-solving skills.
• Effective communication and interpersonal skills.
• IT certifications (e.g., CompTIA A+, Microsoft Certified Desktop Support Technician, ITIL V4) are desirable.
• Solid understanding of ITIL framework and best practices for IT service management

Job Scope:

• Generate leads and identify sales opportunities
• Present product demos and technical solutions to customers
• Prepare proposals, quotes, and pricing
• Collaborate with engineering teams to design tailored solutions
• Assist with product installation and integration
• Provide post-sales support and customer training
• Manage sales pipeline and track progress
• Build and maintain customer relationships
• Negotiate pricing and close deals
• Stay current with product knowledge and industry trends

Requirements:

• At least 3 years of experience in manufacturing automation machines
• Knowledge of CAD software and Microsoft Office
• Diploma (or higher) in any discipline; related experience may apply
• Self-motivated, goal-oriented, creative, and able to multitask
• Able to collaborate effectively with others
• Frequent travel may be required
• Class 3 driving license preferred
• Willingness to adapt and be flexible
• Preferably own vehicle (car allowance provided)

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• The Field Service Engineer provides direction and assistance to work group in order to meet assigned objectives. In this role you will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning
• Provide general technical direction and assistance to the customer in the operation, maintenance, repair, logistic support, and installation of Veolia’s products
• Provide on-site interpretation of data and technical instruction
• Provide Project and Field Service management with complete and prompt information regarding status of programs, customer problems, failures and trends.
• Provide technical assistance through on-site guidance and training in proper operation, maintenance, and troubleshooting of assigned programs and ground support equipment, including the use and proper interpretation of data and technical instructions
• Provide communication to Product Support and Field Service regarding all program activities and problems through regular, timely reports
• Review reported malfunctions and identify / analyze any undesirable trends
• Make recommendations on findings
• Review effectiveness of maintenance actions in order to identify training needs
• Be one of the focal points for assigned account for all matters concerning Veolia products and services and total support, ensuring that both customer and Veolia objectives are met
• Developing and maintaining a customer preference relationship toward Veolia
• Execute value generating plans and coordinate both internally and externally with the customer
• Outlining, presenting and selling the value of Veolia products and services that can benefit customer needs
• Ensure that all the KPIs set by customer are met
• Ensure customer satisfaction by providing high service standards.

Requirements:

• Diploma or Degree in chemical, environmental engineering. Chemistry or equivalent knowledge and experience are welcome.
• Those with experience in water treatment & field service in chemical industry, will be an added advantage.
• Able to work well and excel in a team. Demonstrates leadership qualities.
• Strong communication skills (both written and verbal)
• Possess valid class 3 driving license.

• Well Established Company
• Basic $3500 - $4000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working day: Monday to Friday
• Working hours: 8.15am to 5.15pm

Job Responsibilities:

• Responsible for outdoor and indoor repair work of all cleaning products
• Mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair
• Work closely with service technicians for problem solving and coordinating jobs between field service and workshop repairs
• Any ad hoc duties as assigned

Job Requirements:

• Possess at least a Professional Certificate/ Nitec in any Electrical & Electronic or Mechatronics Engineering or relevant qualification
• Experience in repair of forklifts, automobiles, heavy industrial equipment, and knowledge in engines, motors and electrical would be relevant and useful

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Electrical Engineer/Field Service Engineer (Marine/Electrical)
• Working Location: Tuas West
• Working Hours: Monday – Friday, 8 am – 5.30 pm (One Saturday per month, 8 am – 12 pm)
• Salary Package: Up to $3,300 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Carry out testing and commissioning related to marine propulsion systems, power generation systems (Marine and Land), deck machinery, etc.
• Conduct hands-on fault diagnosis, troubleshooting, and maintenance of marine systems/components in workshops and on-board vessels.
• Perform hands-on work in mechanical repairs, installation, and removals.
• Provide support to the project team on the implementation of new projects.
• Provide technical support to customers.

APPLY NOW!!!

• Minimum 2 years of related experience.
• Minimum Higher Nitec in Electrical Engineering, preferably Major in Power.
• Proficient in Microsoft Office.
• Candidates with experience in Electrical Control Systems are preferred.
• Comfortable with traveling (Anchorage/Local/Overseas) on short notice and at odd hours.
• Comfortable with working outdoors and onboard.
• Inexperienced candidates are welcome to apply, as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65623 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Well Established Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: North
• Working days: Monday to Friday
• Working hours: 8am – 5pm

Job Responsibilities:

• Handle trouble shooting on products on site and identify any leaking or faulty installation of the components
• Perform visual and functional checks on the products on site
• Provide site supervision on contractors for proper installation of the products.
• Communicate with workers on site and supervise their tasks
• Present on improvement plans that generate pull through of product sales
• Work closely with Sales to promote on-site services contracts
• Provide both technical and market insight support to sales department for Oil & Gas market and mechanical packages
• Any other ad-hoc duties as assigned

Job Requirements:

• Possess minimum Bachelor’s degree in Instrument / Mechanical engineering or strong science/technical discipline with at least 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI