• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

(Barcode and Office Automation solutions)

Working Day: Monday – Friday (8.30am – 6pm)
Working location: Ubi
Salary: SGD 2,200 – SGD 2,500 + Commission + Allowance

Job Description:

• Active canvasing for new customer base
• Achievement of agreed upon sales targets and outcomes within schedule
• Pre-sales activities to ensure healthy pipeline and good closure rate, with post-sales activities occasionally according to sales requirement
• Performance of sales cycle which includes sales quotation, order confirmation, purchase requisition, delivery (urgent case), installation (occasionally), payment collection

Requirements:

• Basic IT knowledge in Tele-Communication, Excel, PowerPoint
• Polytechnic Diploma - Electrical & Electronics Engineering is preferably.
• IT Solution selling and experiences in Electronics, Transport, Logistics, Aerospace, Hospitality industries is preferable.

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

Role:

Vision Software Engineer (C++ / WPF / Up to $8000)

• Location: Sembawang
• Working Days: 5 Day A Week
• Working hours : 9:00am - 6:00pm
• Salary : $5000 - $8000 (depends experience)

Job Summary:

We are seeking an experienced Software Engineer to join our team, responsible for
designing, developing, and maintaining software applications for vision systems.

Responsibilities:

• Design and develop PC based automated visual inspection systems for our full range of semiconductor equipment.
• Evaluate and feasibility study on the customer’s vision specifications.
• Responsible to integrate any new vision hardware (camera, frame grabber, etc) onto the vision software.
• Troubleshooting and improve the processing time of the inspection.
• Provide technical support to internal and external customers to fulfill the inspection requirements. Change the vision inspection algorithm to improve the inspection capabilities and its performance.
• Be the key driver for continuous improvement plans for new and existing inspection capabilities.
• Coordinate with customer for any new enquiry with sale personnel if needed.
• Work closely with the vision application and optics team members to produce the best inspection result.
• Build and nurture a culture in engineering organization of harmony, quality, ownership, collaboration, continuous improvement and data-driven decision making.

Requirements:

• BS Science Diploma or higher in electrical and electronic, mechanical, or mechatronics engineering or related technical discipline or equivalent practical.
• Technical troubleshooting experience.
• Minimum 3 years in related field.
• Relevant technical work experience including automation machine system troubleshooting.
• Experience working with end customers.
• Understanding semi-conductor manufacturing process, vision inspection settings, machine software settings and configuration or equivalent practical experience.
• At least 3+ years of experience in software development with C#, WPF, Image Processing , Halcon (bonus)

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

Job Description & Requirements

• Perform end user IT Support
• Perform troubleshooting for client platform related problems
• Support Windows OS, office software, and other Desktop Related Software & Hardware Respond promptly to incident,
• investigate & provide temporary &/or permanent resolution of incidents escalated
• Liaise with support vendors for maintenance, support or issues resolution
• Monitor the agreed service level, document & maintain the configuration of the systems Involve in client platform implementation/upgrade project
• Any ad-hoc duties assigned / required.

• Basic up to $4,200, depending on experience
• No experience also welcomed to apply, with minimum qualifications required
• Annual Increment + Performance Bonus
• Disciplines in either M&E or Building Services

Responsibilities:

• Lead project phases, ensuring adherence to resource, quality, and risk standards, while managing project profitability.
• Coordinate administrative aspects of projects, including reporting, claims, and invoice processing, up to final handover documentation.
• Identify and address project issues, proposing quality, risk, and administrative process improvements.
• Foster effective communication and negotiation, liaising between internal and external stakeholders to ensure project cohesion.
• Manage subcontractor integration, ensuring compliance with technical requirements.
• Interpret project drawings, identify discrepancies across trades, and develop resolutions.
• Oversee project planning, scheduling, and execution of alteration and addition (A&A) works to ensure on-time completion.
• Regularly update management and clients on project progress, maintaining transparency and accountability.

Requirements:

• A Diploma or Bachelor's Degree in Mechanical/Electrical Engineering or Civil/Construction/Building Services Engineering, with a strong understanding of electrical installations or relevant field.
• Minimum 5 years of experience in a related field, with at least 3 years in facilities/building maintenance.
• Proven leadership ability, with the skills to manage and motivate a team effectively.
• Excellent organizational and multitasking skills, capable of managing multiple projects concurrently.
• Class 3 driving license is advantageous.
• Demonstrated commitment, positivity, and the drive to work independently and deliver excellence.

Tyson Jay Recruitment Pte Ltd | EA License No.: 16C7954

Tay Shiong Luan | EA Personnel No.: R23115166

Job Description

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Job Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB
• Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Ship Repair Engineer | Up to $4k | 5 Days | Clementi

• Location: Penjuru lane ( Transport provided at Jurong East)
• Monday to Friday: 8:00 AM – 5:00 PM
• Saturday: 8:00 AM – 12:00 PM
• Salary: $3,300 - $4,000

Job scopes:

• Manage day-to-day operations and coordination of afloat repairs, load testing & inspection services on ships in Singapore and the region.
• Assist Service Manager in handling the company’s field service operations, in technical, operational and commercial matters
• Prepare quotations, costing for invoice, tools & equipment lists and procurement of parts.
• Manage and coordinate service job execution.
• Liaise with our customers, such as Ship Managers, Offshore Operators, Shipyards, Agents and others
• Manage the tools & equipment which are kept at our warehouse. Send for recertification periodically as required.
• Coordinate with Ship Agents, Ports & Ship Yards, handle permits and schedule service attendances.
• Coordinate and arrange transport of Engineers, tools & equipment to and from job sites
• Answer customer queries and provide remote technical support.

Job Requirements:

• Diploma in Marine Engineering or similar.
• Past experience in marine cranes & deck machinery required.
• Experience in coordinating marine service work, especially afloat repairs will be an advantage.
• Able to commit overtime.

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

• American MNC
• Basic from $4,500 - $6,500
• AWS + transport allowance
• Monday – Friday, 8:30am – 5:15pm
• Location: Boon Lay

Responsibilities

• Identify and pursue new business opportunities by contacting potential customers, decision-makers, and target accounts, and analyse market strategies to evaluate options.
• Develop persuasive pitches and collaborate with regional and global teams to secure deals, build pipelines, and progress sales opportunities to closure while maintaining accurate CRM data.
• Cultivate relationships with end customers, influencers, and contractors through direct engagement or distribution partners, ensuring long-term collaboration.
• Set budget forecasts and sales volume targets for the SEA Data Centre market and guide distributors on pricing and quotation strategies.
• Promote the company at trade events, prepare technical papers, and provide marketing and technical support to distribution partners.
• Analyse sales and market data for management decision-making and monitor industry standards and power system solutions to maintain technical expertise.

Requirements

• Degree in Electrical or Mechanical Engineering with at least 5 years of sales experience in the power generation business.
• Proven track record in direct and channel sales, with strong presentation and negotiation skills for engaging senior executives.
• Results-oriented and highly motivated, with strong communication, interpersonal, and teamwork skills.
• Solid technical knowledge of power generation products and solutions, particularly for Data Centre applications, with familiarity in industry standards.
• Willing to travel frequently and work independently in a competitive environment.
• Bilingual in MANDARIN & English to liaise with Mandarin-speaking customers.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected]

**Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752
EA. Registration No.: R24123733 | Chen Yit Keat

Job description:

Customer support:

• To arrange service visiting, install, repair, troubleshooting, and relocation on site.

• To set up and dismantle equipment for demonstrations.

• To conduct equipment familiarization training for users.

• To answer service enquiries.

• To attend user’s meetings.

• To install and commission new equipment at customer’s sites.

Service administration

• To prepare service quotations, contracts, report, and invoice.

• To arrange spare parts from suppliers.

• To send / deliver repair item and spare parts.

• To collect equipment for in-house repairs.

• To deliver new equipment to customers.

• To attack and pursue outstanding debts.

• To send faulty parts to vendors for checking and testing.

• To furnish technical information and quality report to Principal.

Job requirements:

• Min. Diploma in Engineering

• Min. 1 to 2 years of experience in going clients’ sites to perform servicing

• Experience in medical device servicing is advantageous

Apply now by sending your resume to [email protected]

We regret to inform that only shortlisted candidates will be notified

Alex Goh Hock Leong | CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Sciences) | 99C4599

RESPONSIBILITIES

• Parts teardown, re-assembly, re-certification and qualification
• Troubleshoot PCB Electronics

REQUIREMENTS

• Knowledge of soldering is required
• At least 5 - 8 years of soldering experience will be considered for Engineer position.
• Troubleshooting of electronics components or semiconductor components is preferred.
• Knowledge of Repairs in Semiconductor Industry is advantageous
• Up to board / component level experience is ideal.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Responsibilities
• Maintain, monitor and support the infrastructure environment and/or facilities such as:
- Data Centers
- Physical Servers
- Virtual infrastructure and their virtual machines (VMware, Hyper-V, Nutanix AHV)
- Windows Servers and Linux
- Storage (NetApp, DellEMC)
- Backup & Restore (Veeam)
- VMware Horizon & Citrix
- Azure & AWS cloud
• Work on multiple cross-functional base work initiatives and projects.
• Diagnose and resolve complex hardware, software and connectivity problems.
• Ensures high quality IT service delivery through proper testing, quality assurance and documentation preceding complete rollout and normal operation.
• Participate in providing accurate budgetary figures and cost/benefit justifications for the IT Data Center Manager.
• Manages and participates in IT projects whenever required.
• Follow change management processes providing change request initiation, control and impact assessment.
• Develop and maintain processes, procedures, standards and documentation to support successful operation of the server and storage infrastructure.
• Manage third party services needed to provide IT services according to business requirements.
• Provide guidance and ensure IT security and continuity providing security patching, software and hardware updates, malicious software prevention, detection and correction.
• Develop and support security processes.
• Ensure relevant backup and recovery of data, software and system configurations in order to support the IT Disaster Recovery plan.
• Provide a stable, secure and auditable server environment to enable efficient use of business applications and data.
• Ensure software compliance within the server and storage infrastructure area.
• Responsible for technical roadmap development, implementation and improvement of Server and Storage Infrastructure for regional and global systems.
• Responsible for capacity and resource planning for Server and Storage Infrastructure supporting regional and global systems.
• Responsible for planning changes, upgrades, tuning and patches of regional and global systems together with partners and the rest of the Enterprise Operations Team.

Job Requirements:

• Bachelor’s degree in computer engineering or computer science or any other IT variant course level is required
• Technical certifications from main technology vendors such as VMware, Microsoft, Cisco, Nutanix, NetApp, Veeam, Citrix and so on are desirable
• 6-8 years of relevant experience in data centers & servers operations
• Fluent in English
• Exceptionally well organized with attention to details
• Solid networking and interpersonal skills
• Be a good team player but also work independently

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Alternatively, you may wish to email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd, 20 Cecil Street, #08-09 PLUS Building, Singapore 049705
Tel: 6950 9748
http://www.peopleprofilers.com
[email protected]

Consultant in charge: So Boon Shyen, Debbie
EA Licence Number: 02C4944
Registration Number: R1111376

Responsibilities:

• Perform servicing of chillers & other HVAC equipment
• Carry out corrective and preventive maintenance for chillers and related equipment
• Have basic knowledge of overhaul & start up jobs on chillers
• Liaising with customers to resolve complaints cases
• Coordination with vendors and contractors in job coordination
• Assist or involve in schedule planning & prepare technical analysis reports for management’s review
• Ensure all works carried out in accordance with the specified quality and EHS standards
• Any other duties as deemed necessary from times to times

Requirements:

• NITEC/ Diploma/ Degree in Mechanical, Electrical, Electronic Engineering or equivalent
• Relevant experience in Chiller Systems/ Air-conditioning / BMS / ACMV / HVAC
• Positive attitude

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to kenneth(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Kenneth Tan Guan Quan

EA Personnel Reg No: R1550240

We are seeking a System Safety Engineer for ST Engineering.

Job Title: System Safety Engineer

Responsibilities

• Develop system safety program plan, hazard analyses and risk assessment documents, safety assessment report and hazard logs based on contracted system safety and project requirements

• Facilitate system safety reviews and assessment with project system safety working groups and to facilitate and seek technical endorsement for safety assessment report with company and customer safety review boards

• Ensure system safety requirements and implementation are complied with company process and contracted requirements for projects and in-house products

• Submit monthly project status report and updates to Project Manager, System Safety Leads and Department Manager

• Support safety related administrative functions

• Lead and participate in Workplace Safety & Health committee and functions

Requirements

• Degree/Diploma in Electronic/Electrical/Mechanical Engineering

• At least 2 years working experience in communication/mechanical/ electrical project environment as system, project, engineering support, safety or maintenance engineer

• Experience and qualified as Safety Officer in Environmental Health & Safety would be advantage

• Good presentation, leadership and communication skills

• Working location is in Jurong East

• Singaporeans Only

Please click apply, or submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Goh Kwan Way Marc

EA License No : 06C4642

EA Reg No : R24120754

We regret that only shortlisted candidates will be notified.

Location: Taiseng

Job description:

• To arrange service visiting, install, repair, troubleshooting, and relocation on site.

• To set up and dismantle equipment for demonstrations.

• To conduct equipment familiarization training for users.

• To answer service enquiries.

• To attend user’s meetings.

• To install and commission new equipment at customer’s sites.

• To prepare service quotations, contracts, report, and invoice.

• To arrange spare parts from suppliers.

• To send / deliver repair item and spare parts.

• To collect equipment for in-house repairs.

• To deliver new equipment to customers.

• To attack and pursue outstanding debts.

• To send faulty parts to vendors for checking and testing.

• To furnish technical information and quality report to Principal.

Job requirements:

• Min. Diploma/ Degree in Engineering/ Science (Mechanical / Biomedical / Electrical)

• Min. 1 years of experience in going clients’ sites to perform servicing

• Experience in medical device servicing is advantageous

For interested applicants, please send your updated resume to: [email protected]

All candidates’ information will be treated with the strictest confidence

Melissa Zhang Zhiqi (Mezzo)

R2197564

Recruit Express Pte Ltd

99C4599

Production Engineer

• Working hours: 5 Days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $6000

Position Summary:
The Production Engineer is responsible for improving the production technology of the EVAL site which will be launched in second half of 2026. The Production Engineer supports the production team for identifying, investigating, and resolving production issues in technical aspects. The Production Engineer leads technology for process control (DCS, SIS), operation condition, and product quality improvement and joins project work related to production technology development and improvement. Until the startup of EVAL production line, training and learning opportunities of EVAL production technology is provided by experienced members in Company. The Production Engineer will be a member of the commissioning and startup team of new EVAL plant and is responsible for designing and optimizing the process condition and process control system (DCS) and supports other production team members to achieve safe and stable commissioning and startup of new EVAL plant.

Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Minimum Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in Chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Preferred Requirements:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction process, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programming and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

Karen Lee Kai En Reg No: R22108159

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Position title : Vision Software Engineer

Location: Admirality Street
Working Days: 5 Day A Week
Working hours : 9:00am - 6:00pm
Salary : $5000 - $8000 (depends experience)

Job Summary:

We are seeking an experienced Software Engineer to join our team, responsible for
designing, developing, and maintaining software applications for vision systems.

Responsibilities:

• Design and develop PC based automated visual inspection systems for our full range of semiconductor equipment.
• Evaluate and feasibility study on the customer’s vision specifications.
• Responsible to integrate any new vision hardware (camera, frame grabber, etc) onto the vision software.
• Troubleshooting and improve the processing time of the inspection.
• Provide technical support to internal and external customers to fulfill the inspection requirements. Change the vision inspection algorithm to improve the inspection capabilities and its performance.
• Be the key driver for continuous improvement plans for new and existing inspection capabilities.
• Coordinate with customer for any new enquiry with sale personnel if needed.
• Work closely with the vision application and optics team members to produce the best inspection result.
• Build and nurture a culture in engineering organization of harmony, quality, ownership, collaboration, continuous improvement and data-driven decision making.

Requirements:

• BS Science Diploma or higher in electrical and electronic, mechanical, or mechatronics engineering or related technical discipline or equivalent practical.
• Technical troubleshooting experience.
• Minimum 3 years in related field.
• Relevant technical work experience including automation machine system troubleshooting.
• Experience working with end customers.
• Understanding semi-conductor manufacturing process, vision inspection settings, machine software settings and configuration or equivalent practical experience.
• At least 3+ years of experience in software development with C#, WPF, Image Processing , Halcon (bonus)

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

• Well Established Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: North
• Working days: Monday to Friday
• Working hours: 8am – 5pm

Job Responsibilities:

• Perform visual and functional checks on the products on site
• Provide site supervision on contractors for proper installation of the products.
• Handle trouble shooting on products on site and identify any leaking or faulty installation of the components
• Communicate with workers on site and supervise their tasks
• Present on improvement plans that generate pull through of product sales
• Work closely with Sales to promote on-site services contracts
• Provide both technical and market insight support to sales department for Oil & Gas market and mechanical packages
• Coach, mentor and elevate associates’ capabilities to enable them to deliver results exceeding expectations while creating opportunities for development and succession
• Any other ad-hoc duties as assigned

Job Requirements:

• Possess minimum Bachelor’s degree in Instrument / Mechanical engineering or strong science/technical discipline with at least 1-2 years of relevant onsite sales experience in instrumentation or process industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Project Engineer (Marine Engineering)
• Working Location: Tuas West
• Working Hours: Monday – Friday, 9am – 5.30pm (One Saturday per month, 9am – 12pm)
• Salary Package: Up to $5,500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assist the sales team in project execution.
• Coordinate and manage project documentation, liaising with customers and suppliers on project-related matters.
• Oversee internal and external coordination on issues related to quality, engineering, delivery, and commissioning.
• Perform additional duties as assigned by the manager.

APPLY NOW!!!

• Minimum Diploma in Mechanical/Electrical/Marine Engineering or equivalent with at least 2 years of experience in project management; experience in marine projects is a plus
• Willingness to travel as required.
• Proficiency in Microsoft Word, Excel, and PowerPoint.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70693 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

As a Server / Network Security Support Engineer, you are required to provide maintenance support to clients. You will play a key part in Technology Services Delivery team to ensure security solution maintained at the highest quality and standard

What will you do?

• Perform Preventive Maintenance on customers solution with accuracy and adhere to high quality of work
• Perform Corrective Maintenance on any fault calls reported and comply closely to project SLA
• Perform Patch Management support, plan and apply regular updates to mitigate vulnerabilities, OS patching and maintain system compliance
• Provide support to customer asset discovery, consolidation, tracking, updating and monitoring to ensure they are up-to-date
• Perform regular health checks and activities to ensure operational effectiveness for customers
• Provide and prepare technical maintenance documentation to be delivered for customers
• Work closely and collaboration with different stakeholders from internal teams to vendors to provide end to end of assigned task
• Work closely with Team Leader or Service Manager to meet customer delivery milestones
• Participate in maintenance standby duty to cover 24x7 support on rotational basis as pre-assigned by the team lead

The ideal candidate should possess:

• Diploma / ITE in Computer Science / Computer Engineering / Information Technology related field, or IT equivalent
• Typically 1-2 or more years of experience in IT domain and some experience in patching for Window environments
• Understanding of System/Servers and Network technology
• Knowledge of network system, network architecture, routing, switching, firewall and security
• Knowledge of technical vulnerability management (vulnerability assessment, penetration testing), security technologies (system hardening, IDS/IPD, firewall), security incident response and security assessment
• Certification in CCNA, CISSP or equivalent network or IT security certifications will be value-add
• Team player with strong communication and interpersonal skills
• Self-motivator with a positive attitude and with high energy
• Independent and customer focused
• Proficient in written and spoken English
• Able to travel as required

Responsibilities:

• Project Planning & Coordination: Organize and schedule project activities, including expediting timelines and completing field documentation. Collaborate with internal teams to ensure all project requirements are captured during the initiation phase.
• Design Review: Assess and verify design drawings prior to the start of construction.
• Stakeholder Engagement: Work closely with design teams, clients, and subcontractors to ensure seamless coordination throughout construction activities.
• Quality Assurance: Inspect subcontractor work to ensure it meets established standards and customer specifications.
• Project Execution Support: Assist the Project Manager in delivering projects on schedule, ensuring safety, and adhering to compliance standards.
• Testing & Commissioning: Oversee the testing and commissioning of equipment with subcontractors after installation.
• Customer Training: Conduct training sessions for clients following project handover.
• Final Inspections & Documentation: Perform final inspections, and prepare data for as-built drawings and comprehensive project documentation.
• EH&S Compliance: Adhere to and implement Environmental, Health, and Safety (EH&S) policies, procedures, and applicable regulations to achieve EH&S objectives.

Qualifications & Competencies:

• Bachelor’s degree in Engineering.
• At least 3 years of experience in project management.
• Strong proficiency in engineering management, problem-solving, analytical thinking, and understanding of commercial terms and conditions.
• Experience working within an ISO 9000 quality framework will be preferred
• Familiarity with Fire Protection and Fire Alarm Systems is required.

Job Description:

• To attend all necessary meeting with clients or subcontractors during various stages of the project.
• Receives instructions from construction managers and distribute to subcontractor accordingly. The engineers shall take charge of day-to-day running and coordination of all site works, inspection and include testing and commissioning.
• To prepare detailed design and engineering of entire Electrical system.
• Carry out resources planning and control of materials, tools and equipment ordered and delivered.
• To ensure cost control, maintain project timeline and manage manpower resources for the project.
• To liaise with appointed Mechanical and Electrical PE for all submission to authorities.
• To attend to site progress meeting and site technical issues and report to Construction Manager.
• To attend and liaise with authorities for plan approval and site inspection including preparation and vetting drawings plan for submission to all Authorities.
• Will be the frontline contact with Civil and SWCs’ representatives on site.
• Monitor daily site progress and update programme on the site progress report.
• Identify complex problems and review related information to develop and evaluate options and implement solutions.
• Using logic and reasoning to identify the strengths & weaknesses of alternative solutions, conclusions or approaches to problems.
• Responsible for technical support activities including installations, testing, commissioning, repair, modifications, preventative maintenance and troubleshooting of systems.
• Proficient in REVIT and AUTOCAD software applications.
• Handle and resolve technical and engineering problems.
• Other ad-hoc duties when assigned.

Job Requirement:

• Working experience with LTA projects or similar government authority.
• Candidate must possess at least Bachelor's Degree/ Post Graduate Diploma/ Professional Degree in Engineering (Electrical/ Electronic) or equivalent.
• The Electrical Engineer shall have minimum of Five (5) years engineering experience after tertiary education with at least Three (3) years relevant experience in commercial mixed development projects of a similar size and complexity.
• Required Skill(s): Organizing, Planning and Prioritizing Work, Time Management, Communication, Go-getter mindset

Site Office Address: 2 Internationa Business Park, The Strategy Singapore 609930

Site Location : Jurong East Mrt (J121 Project)

Job Description

Team Summary:

The Client Services Team provides industry-leading operational support to Visa’s clients around the world. With our deep knowledge and expertise, we bring the voice of the customer into the design, development and successful deployment of Visa products and services. We are trusted partners to Visa’s clients, providing expertise to support and successfully grow their business.

The Client Testing team is part of Visa's Global Client Services group. We deliver quality services and solutions using best-in-class processes, methodologies, and technology with our worldwide workforce. We are an integral part of revenue-generating areas within the company. This team is dedicated to its customers and to building on past achievements. We are committed to leveraging innovative technology to enhance quality and to accelerate time-to-market. Visa has one of the most visible and most used comprehensive payment systems in the world.

What a Senior Software Test Engineer does at Visa:

This is an individual contributor role responsible for identifying and resolving issues of simple to moderate complexity. This position is at an intermediate professional level and requires strong execution and analytical abilities. This role works independently and receives minimal guidance only in the most complex situations. The role will analyze and troubleshoot user requirements, procedures and problems to automate or improve existing systems under broadly defined practices and procedures, including working with developers in analyzing and developing process improvements for system administration and environmental build functions.

In this role, you are expected to:

• Be responsible for programming, testing, implementation, documentation, maintenance and support of systems application software.
• Design, create, execute and report on functional tests against multiple applications.
• Research, create and evaluate technical solution alternatives for the business needs.
• Follow standards in development and testing to ensure compliance with Audit Requirements.
• Follow Quality Control processes according to the Industry Standard practices.
• Actively look for opportunities to enhance standards and improve process efficiency.
• Identify and document software defects in a clear manner and retest using corrected code to resolve the issue in a timely manner.
• Identify and troubleshoot system issues working with development as required.
• Design, document and track test cases in tracking system.
• Identify opportunities for process improvements and efficiencies.
• Work with business representatives, IT Management, IT development, support teams and vendors to ensure on time, on budget, and quality delivery of testing deliverables.
• Coordinate and collaborate with a globally distributed team.

Why this is important to Visa

The successful candidate will be part of a team that designs and develops test designs as well as cases for the Client Testing Organization. The individual will perform functional and automation testing for Visa Processing Services applications. The role holder will need detailed analytical skills and a good understanding of the test methodologies to be able to interface directly as well as make decisions with staff members of Client Testing, Product Management, Project Management, Client Implementations and Development.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office three days a week - Tuesdays, Wednesdays and Thursdays.

Qualifications
What you will need:

• We are looking for an individual who brings breadth of experience, a curiosity about payments, is results-driven and client focused. As a candidate, you should have:Bachelor’s Degree in Computer Science, Computer Engineering, Management Information Systems or Technology-related field.
• Minimum 5 years of hands-on Quality Assurance experience.
• Korean language capabilities (verbal and written communication) to liaise with Korean speaking clients
• Manual testing experience.
• General business knowledge of financial systems.
• Basic understanding and knowledge of Software Engineering Concepts and Methodologies is required.
• Strong understanding of Agile, scrum and Quality Assurance processes and methodologies.
• Experience with tools like clear quest, ALM, AGM, Share point and Wiki.
• Must have experience with Automation tools like QTP, Selenium RC and Web driver.
  

What will also help:

• 3 plus years of EFT experience strongly desired.
• Tandem and Connex Advantage experience is a plus.
• Japanese language capabilities (verbal and written communication) is an added advantage to liaise with Japanese speaking clients

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Job Responsibilities

• Plan, design and lead mechanical system expansion projects to facilitate tool utilities demand of future technology of manufacturing equipment
  
• Responsible for Continuous improvement of preventive maintenance programs for systems to achieve optimal system performance and uptime.
  
• Maintain maintenance record for system fault history traceability, recommend and implement improvement/enhancement projects.
  
• Engage in driving system reliability improvement initiative to enable maximum equipment uptime and reduction of system interruption.
  
• Lead troubleshooting and timely response to site for system abnormities to reduce production impacts. Carry out Root cause analysis and implement action plans to prevent recurrence.
  
• Perform effective capacity tracking and planning for mechanical systems
  
• Innovate ideas, implement predictive maintenance through SMART Facilities initiative in collaboration with control team.
  
• Track and monitor equipment spare parts and consumable inventory
  
• Enforce to company’s environmental safety health policy and procedure, standard operating procedure with risk assessment, good housekeeping standard and quality policy when performing work.
  
• Utilize computer base software to document and analyses records of maintenance work order, equipment history and project tracking.
  

Job Requirements:

• Bachelor’s degree in Mechanical engineering.
  
• Design and Engineering background of mechanical system such as HVAC system and Exhaust system will be of good advantage.
  
• 5+ years of experience with mechanical facilities background in critical environment
  
• Ability to understand and use schematic, single-line drawing and related equipment and system documentation.
  
• Ability to work in a team environment with various professional level.
  
• Considerable knowledge and application of problem solving and data analysis methodology.
  
• Considerable knowledge of maintenance practices and procedure and installation work.
  

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations.

Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition.

Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs.

Inspects construction and installation progress for conformance to established drawings, specifications, and schedules.

Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.