Contract role- Fully onsite

Key Skill

- Red Hat Enterprise Linux (RHEL) and Windows Administration

- Must Have:

o Intensive experience in supporting RHEL for JBOSS/WebSphere/WebLogic, Oracle DB is a must

o Intensive experience in supporting RHEL in DMZ is a must

- Professional understanding of networking related to RHEL and Windows

- Professional understanding of SAN Storage related to RHEL and Windows

- Good understanding of large Data Center Facilities operation

- Hands-On experience supporting various Infrastructure agents like NetBackup, BMC Patrol

- (Mid-Level) vSphere 5.x and 6.x

- Cross-team collaboration with storage, network, security and application delivery

- Technical leadership quality to handle technical challenge and sensitive situations

- Integrate the server automation process either by custom scripts or via third-party solutions(Chef)

- Candidate should have the drive and intellectual horsepower to resolve user issues and support them through telephone, email, or via chat services as applicable

- Strong communications skills

- Excellent spoken and written English communication skills

-

Key Responsibilities

Minimum 3 years of hands on Linux Engineer experience

- Managing and Operating Red Hat Linux, Windows VM Infrastructure

o Installation/Configuration/Hardening/Maintenance/Patching

o Maintain System Security

o Advanced Troubleshooting

o Performance Tuning

o Capacity Management

o Preventive/Proactive Support

o Incident/Change/Problem Management

o Provide system administration support and guidance for development team’s app configuration tasks

o Veritas Clustering Setup on RHEL VM would be added advantage

o Chef Automation would be added advantage

- Managing and Operating VMware vSphere IT infrastructure

- Other IT Infrastructure Related Tasks

Contract role- Fully onsite

Key Skill

- Red Hat Enterprise Linux (RHEL) and Windows Administration

- Must Have:

o Intensive experience in supporting RHEL for JBOSS/WebSphere/WebLogic, Oracle DB is a must

o Intensive experience in supporting RHEL in DMZ is a must

- Professional understanding of networking related to RHEL and Windows

- Professional understanding of SAN Storage related to RHEL and Windows

- Good understanding of large Data Center Facilities operation

- Hands-On experience supporting various Infrastructure agents like NetBackup, BMC Patrol

- (Mid-Level) vSphere 5.x and 6.x

- Cross-team collaboration with storage, network, security and application delivery

- Technical leadership quality to handle technical challenge and sensitive situations

- Integrate the server automation process either by custom scripts or via third-party solutions(Chef)

- Candidate should have the drive and intellectual horsepower to resolve user issues and support them through telephone, email, or via chat services as applicable

- Strong communications skills

- Excellent spoken and written English communication skills

-

Key Responsibilities

Minimum 8 years of hands on Linux Engineer experience

- Managing and Operating Red Hat Linux, Windows VM Infrastructure

o Installation/Configuration/Hardening/Maintenance/Patching

o Maintain System Security

o Advanced Troubleshooting

o Performance Tuning

o Capacity Management

o Preventive/Proactive Support

o Incident/Change/Problem Management

o Provide system administration support and guidance for development team’s app configuration tasks

o Veritas Clustering Setup on RHEL VM would be added advantage

o Chef Automation would be added advantage

- Managing and Operating VMware vSphere IT infrastructure

- Other IT Infrastructure Related Tasks

Job Description

• Develop control solution related to Semiconductor equipment.
• Design electrical system includes interlock, power distribution, digital/analog signal, I/O, etc
• Manage external vendors or contractors to deliver sub-systems that meet design specification and reliability
• Responsible for equipment safety, manage equipment compliance and certification on standards such as SEMI, CE, etc
• Integrate and test subsystems

Requirement

• Bachelor’s Degree in Electrical Engineering or equivalent
• At least 5 years working experience in capital / semicon equipment electrical system design
• Familiar with AC & DC application, motors, sensors, etc
• Experience in semiconductor equipment industry or high precision automation equipment industry
• Familiar with communication protocol, such as Ethernet, RS232, etc
• Working knowledge of electrical systems including motion, temperature measurement, PID loops, and safety interlock circuits.
• Strong diagnostic skills and capable of resolving electrical noise, grounding, and signal integrity issues
• Experience in Electrical CAD tools
• Experience in PCB design is an advantage

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg
Please include your availability, expected salary and reason for leaving current job
We regret that only shortlisted candidates will be contacted
EA: 94C3609 / Reg: R1325913

• Identify and resolve problems with marine motors, auxiliary engines, steering systems, and other related components.
• Repair inboard and outboard engines, focusing on fuel, cooling, and exhaust systems.
• Perform regular maintenance to ensure the proper functioning of all shipboard systems.

Requirements:

• Diploma in Marine Engineering or equivalent.
• At least 2 years of nautical maintenance and repair experience.
• Skilled in using diagnostic tools and marine service equipment.
• Good understanding of marine engines, auxiliary engines, and cargo pumps.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Electrical) for the next phase of their business. They are located in West.

Duties:

• Lead Electrical discipline for CAPEX projects, supervising consultants, contractors, and vendors.
• Develop and issue Electrical design bases, specifications, and scopes of work.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Approve Electrical deliverables and develop necessary project documents.
• Support regulatory approval processes.
• Collaborate with project management and engineering teams.
• Witness factory acceptance tests (FAT).
• Ensure accuracy of engineering databases (e.g., SmartPlant tools).
• Review and document as-built deliverables.
• Follow Quality Management System and QA plans.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 15 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

• Collaborate closely with the Planning and Project Controls Manager to perform planning and scheduling, risk management, cost control, and reporting activities throughout the detailed design and construction phases of the project.
• Act as the main contact for planning, scheduling, and cost analysis, developing accurate cost forecasts and actionable reports to support effective project management.
• Prepare and deliver clear status reports, issue network-based schedules, update Primavera P6 with project progress, and monitor earned value systems to guide team performance and understanding.
• Strong knowledge of planning and scheduling to identify scheduling issues and recommend corrective actions and implement relevant control services.

Requirements:

• Degree in Project Management or equivalent
• At least 5 years EPC/full-service project delivery processes and apply project controls methodologies and practices specifically related to cost control development.
• Strong verbal and written communication skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

Job Description

• Working on 6nm and below advanced process project APR and Timing/PI sign-off
• Take the TOP and PM role for the complicated hierarchical chip (more than 20M inst plus 500+ macros)
• Take the Block or Block coordinator role for complex blocks
• Do early prediction for critical APR/Timing/PI issues

Job Requirements

• APR/Timing/PI hands-on/tapeout experience on complicated hierarchical chip
• With min. 8 years relevant experience
• TCL/Perl/Python/C/C++ programming skill
• Have advanced process(n6 or below) experience is a plus
• Excellent communication and team work spirit

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Technical Support Engineer / Assistant Manager – Technical (Full time opening = Stability, Mechanical Engineering, industrial piping and instrumentation design)

Job Scope:

• Attend technical meetings and presentations with customers.

• Perform technical calculations (e.g., WFC, Thermowell design, thermistor) and issue certificates.

• Provide technical advice and propose solutions to meet customer needs.

• Design and prepare technical drawings using 2D AutoCAD.

• Liaise with headquarters on design changes and certification compliance (e.g., ATEX, IECEx).

• Plan work schedules and guide technical support engineers.

• Address and resolve technical issues for customers and internal teams.

• Collaborate with the sales team to understand and meet customer requirements.

Additional Skills

• Good interpersonal and communication skills

• Experienced in coordinating schedules and providing guidance

• Analytical problem-solving ability to propose alternative technical solutions that align with customer needs and company standards.

If you are interested in this opportunity, submit your application with current salary now to [email protected] find out more about this position. Thank you.

Chen Hsiu Wen (Winnie) | Personal Reg No: R1980765
Manpower Staffing Services (S) Pte Ltd | EA License No: 02C3423

• Global and well-established MNC in the Pharmaceutical industry
• Attractive remuneration and benefits package

About Our Client

We are partnering with a global and well-established MNC in the Pharmaceutical industry, headquartered in US.

Job Description

• Able to write efficient and maintainable codes to deliver enterprise AI projects, products, and platforms with a focus on scalability and reusability
• Involved in both back end and front end development mainly using Python, SQL, React languages
• To deploy solutions on the cloud with CI/CD integration
• To work with DevSecOps tools for deploying and versioning code
• Staying up to date with the latest advancements in software engineering technologies

The Successful Applicant

• At least 2 years of hands-on experience building robust and scalable software using Python, SQL, REST, JavaScript, TypeScript / node.js + React framework
• Has experience in building data intensive applications in a modern technology stack such as AWS, Azure Cloud services, data pipelines, SQL/No-SQL databases
• Familiar with CI/CD environments and test-driven development leveraging a Version Control system including different branching strategies

What's on Offer

• Permanent role
• Global and well-established MNC in the Pharmaceutical industry
• Attractive remuneration and benefits package

Contact

Cheryl Ang (Lic No: R2091316/ EA no: 18C9065)

Quote job ref

JN-092024-6537127

Phone number

+65 6416 9884

Page Personnel Recruitment Pte. Ltd.| Registration No. 201736642C

Located at Chai Chee

Precision industry (Clean room)

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to become Leader

Requirements

• Diploma in Precision Engineering
• No experience required

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Your role:

Do you want to design and build ESG & regulatory services using the latest technologies while making a positive impact to the planet? Are you confident at iteratively refining user requirements and removing any ambiguity? Do you like to be challenged and encouraged to learn and grow professionally?

We’re looking for software engineers to:

• Provide technology solutions that will solve business problems and strengthen our position as digital leaders in financial services.
• Design, plan, and deliver sustainable investing solutions using modern programming languages and tooling.
• Provide technical expertise and recommendations in assessing new software to support and enhance our existing applications.
• Conduct code reviews and test software as needed, along with participating in application architecture and design in an Agile environment.

Your team:

You’ll be working in the Save, Protect and Grow my Investments (SPGI) stream, as part of a global crew but you will be based in Singapore. You will be joining a team that prides itself on caring for its users and their experience, providing next generation ESG & regulatory solutions covering cross divisional, multiple portfolios and asset classes across international locations.

This is an experienced software engineering appointment, and as such you’ll play an important role in improvement of our applications architecture, development of tooling, pipelines and workflow, and reinforcement of coding quality.

Your expertise:

• Seasoned software engineer with extensive experience focused on building and testing complex applications.
• Expert level knowledge in backend technologies (including Java or Kotlin, SQL / NoSQL databases).
• Expertise in CI/CD pipelines, tooling, and deployment (e.g. Docker, Kubernetes and GitLab).
• Experience with big data technologies such as Apache Spark.
• Experience with Azure cloud services.
• Ability to design, plan and deliver solutions in a large-scale enterprise environment that adhere to security, compliance, reliability and operational standards.
• Ability to support other engineers, collaborate and develop your skills together with willingness to learn new technologies and skills to grow next generation of software engineers for the bank.
• Knowledge and experience with green software engineering principles and practices would be advantageous.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

COMPANY DESCRIPTION

About the Company

JERA Global Markets (JERAGM) is a leading utility-backed seaborne energy trader specialising in LNG, coal and freight. A joint venture between majority shareholder JERA Co., Inc. and EDF Trading, JERAGM's shareholders are among the world's major utilities.

JERAGM operates one of the largest energy portfolios in the world which gives it an in-depth understanding of the way local, regional and international energy markets behave. Its in-depth knowledge and market insights enable us to capture trading opportunities, optimise portfolios, create value and enhance security of supply for our customers.

Headquartered in Singapore, JERAGM has a global talent pool of close to 300 people across offices located in four strategic locations: Singapore, Japan (Tokyo), the UK (London) and the US (Houston).

JERAGM is strongly capitalised with over US$500 million in paid up capital and a total equity of US$4 billion. JERAGM has retained its A+ Stable rating from R&I, attributable to a robust business model and solid financial base.

RESPONSIBILITIES

JERA GM is implementing a series of new IT systems to reduce its reliance on its shareholders for IT services and to enable the rapid growth into a global leader in the trading of fossil fuels.

At the core of the system landscape is a set of vendor systems that support critical business activities such as trading, risk management, pricing, and logistics. JERA GM have and will continue to make significant investments building on top of these systems to tailor them to the specific needs of its business. Up until now, this work has been performed by teams of consultants. JERA GM would like to develop an in-house capability, so they can be self-sufficient in the ongoing development on this platform.

This in-house capability needs to be able to extend, customise, configure and integrate these systems to meet the ongoing needs of the business. They will also support the development of new bespoke systems, such as for business intelligence and decision support, to meet needs not provided by the vendor systems.

The Core Platform Software Engineer will:

• Work to obtain excellent business knowledge of the full transaction cycle within a multi-commodity energy trading environment such that they can converse directly with users and other stakeholders with minimal hand-holding from Business Analysts.

• Develop new features on the company's credit system (Cubelogic) and ETRM (Energy Trading and Risk Management) system to support the company's growth (new products, new processes), in a Python/Azure (Databricks & ADF)/C# / SqlServer environment.

• Demonstrate a broad set of technical skills including expert database development and administration, Python/.NET/C# development and Powershell Automation/Devops skills.

• Build new features on the various applications that revolve around the Cubelogic/ETRM (APIs, loaders, reports, BI). It is most important that they have the ability and desire to rapidly pick up a diverse range of technical skills to support challenges as they arise. They will be actively required to work with challenges using technologies such as Azure IaaS/PaaS, Python, Databricks, Power BI.

• Apply their strong software engineering skills to:
  • Improve the ability to integrate vendor systems together.
  • Improve the ability to unit test customisations of vendor systems.
  • Improve the structure the source of such customisations.

• Work with JERA GM IT to evaluate the quality of the existing vendor system customisations and build out a prioritised backlog of improvements. Work to then safely improve the code estate to improve its flexibility and maintainability.

• Support efforts to improve end-to-end test automation and continuous integration across the application estate.

• Have a strong engineering focus and eye for high quality delivery. They will be expected to deliver high quality software and adhere to modern software engineering practices. They must also be driven to automate everything as this is ingrained in the culture of the team.

• Work within a hybrid internal/consultant/vendor team to deliver a backlog of new features, enhancements, bug fixes and integrations to support the ongoing needs of the LNG and Coal trading businesses. Demonstrate a strong ability to self-organise when required.

• Work collaboratively with the rest of the JERA GM technical team, whilst also demonstrating end-to-end ownership of entire problems where required.

• Show a highly proactive attitude in learning and immersing themselves in the vendor platforms with the aim of gaining an expert knowledge of how to develop and support extensions and integrations.

• Be comfortable with agile delivery modes such as Scrum or Kanban but also be flexible to work with whichever delivery approach works best for the problem at hand.

• Provide 3rd line production support.

Skills and Experience required

• 5-10 years of overall experience with advanced level of coding experience in either Python or C# with good knowledge of other.
• Strong experience in SQL, & PowerShell
• Modern cloud-based system architectures and technologies such as Data Lakehouse using Databricks, Azure functions and ADF
• Experience with C# .NET
  • Good understanding of the core language and framework
  • Service oriented development (WCF, Rest API, GraphQL)
  • Data access development (ADO.NET, EF or equivalent such as NHibernate)
• Extensive SQL Server database design and development skills (excellent SQL skills assumed). A good working knowledge of database performance optimisation is also required.
• Familiar with knowledge of Azure services including VNET, Key-Vaults, Azure Data Factory, ADLS Gen2, Virtual Machines, App Services, Storage Accounts and Azure Active Directory
• Orchestrating data pipelines using Azure Data factory
• Strong conceptual understanding of Big Data, Map-Reduce, Spark, file formats such as Parquet, Avro, ORC etc.
• Reporting tools such as Power BI
• Knowledge of JavaScript/UI framework like Angular/React.
• Cloud experience in Azure or AWS
• Experience with Windows Server infrastructure
• Experience working with agile delivery methodologies such as SCRUM or Kanban.
• Experience with Microsoft-based BI stack, including SSIS, SSRS and Power BI is desirable.
• Experience with Azure PaaS and IaaS and corresponding automation toolkits is desirable.
• Experience in Allegro ETRMs is desirable.
• Experience in Cubelogic is desirable.
• Proven work experience in the energy trading, commodities trading or corporate banking sector

• Highly motivated to continually develop skills and techniques to ensure the best tools are used for the job. Support, resources and technical mentoring will be provided by JERA GM as required.

• Highly motivated to deliver results and ‘go the extra mile' to meet deadlines.

• Able to multi-task with minimal supervision and highly structured and organised in the way tasks are approached.

• Excellent communication skills.

• Strong academic background, educated to degree level and/or equivalent professional qualification or relevant business experience.

AI based maintenace & Reliability Optimization Engineer:

Develop engineering solutions to overcome repetitive failures and other problems that adversely affect plant operations.

Manage and supervise a team of Calibration/E&I Technicians to perform instrument calibration and instrument maintenance activities

• Support maintenance operations and shutdown activities by working with Supervisor and Engineer on developing the annual PM plan, setting work priorities; scheduling PM activities, coordinating and resources planning to meet the schedule in cost-effective way.

Drive Sustainability: Lead initiatives for waste reduction, carbon emissions, and water conservation; assess and adopt renewable energy solutions for the manufacturing plants in semi conductor and petrochemical sectors

Continuous Improvement: Apply data-driven approaches to improve asset reliability and sustainability, integrating best practices across the manufacturing plant.

AI-driven predictive maintenance improves operational efficiency by optimizing maintenance schedules and resource allocation. Analyzing real-time data and predictive analytics allows AI algorithms to prioritize tasks and allocate resources more effectively.

Requirements

• Bachelor’s in reliablity engineering or related field

• ⁠Ability to garner technical insights from large engineering data sets using analytical tools and concepts; making competitive

• Minimum 3 years in reliability engineering, energy management, or sustainability within manufacturing

Provide 1 st and 2nd level support  Technical assistance and support for incoming IT Helpdesk and End User desktop queries and problems.  Laptop/desktop/peripherals hardware and software technical support.  Windows 7/10, Windows server, file/print/scan services, Outlook/Office 2016, Office365 suite, 2FA, LAN\WAN/Wireless network connectivity, VPN, mobile devices, meeting room audio/video conferencing systems, PABX and basic application troubleshooting.  Perform PC/Laptop Refresh, Onboarding and off boarding of users and ensure asset inventory tracking is updated.  Escalate issues to OEM/vendors and follow-up until the resolution of the problem.  Out-Of-Office-Hours On-Call support. 2. Systems administration and maintenance  Provide Wintel server, Active Directory, GPO, WSUS, Software deployment and system administration.  Liaise with external vendors for any related hardware/software maintenance and services.  Perform Installation/Configuration/Monitoring/Patching/Upgrades of desktops, servers, operating systems, antivirus, databases and other system related software.  Participate in disaster recovery testing. 3. IT governance & documentation  Involve in regular review and update of infrastructure policies, procedures and system documentation to ensure compliance.  Plan and conduct end-users training as needed.  Conduct quarterly IT asset counts.

At least 2 years of working experience in IT helpdesk providing 1st level and 2nd level end user desktop support. 2. Strong experience in End user hardware and software technical support, Windows 7/10, Office 365 administration and Active Directory. 3. Good to have networking, storage and some database administration experience. 4. Able to work on a rotating 2nd level Out-Of-Office-Hours support On-Call basis. 5. Knowledge of ITIL operation. 6. Strong analytical skills, ability to work independently and in a team environment. 7. Possesses good attitude, good interpersonal and communication skills. EDUCATION 1. Degree/Diploma in Electronic/Computer Engineering or Computer Studies or equivalent. 2. Good to have ITIL foundation certification. 3. Good to have Microsoft 365 or MCSA certification

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Brief Summary:

• Basic Salary: $2500 - $3500 + Quarterly Com+ Transport Allowance
• Mon - Fri (8.30am – 5.30pm)
• Company: Woodlands
• Permanent Role + AWS + VB (depend on performance) + 14 days AL (+1 per year) + Confirmation increment

Job Responsibilities:

• Explain product features and solutions to meet customer needs.
• Build strong relationships with clients and identify new business opportunities.
• Prepare proposals, conduct product demonstrations, and offer training to clients.
• Analyse industry trends and competitors to guide sales strategies.

Job Requirements:

• With Diploma/Certification in Engineering relevant courses.
• With 0 - 2 years of B2B Sales Experience.
• Possess Valid SG Class 3 License is an advantage.

For consideration, kindly submit your CV by clicking “APPLY NOW” or TEXT +65 9422 1220 for confidential discussion.

*Only shortlisted candidates would be notified*

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R22111807 | Yap Teng Hui

Your role:

• Work closely with business stakeholders to understand their requirements and provide expert guidance on leveraging T24 functionality to meet their needs.
• Collect and analyze requirements, and manage end-to-end operations related to T24 business functions.
• Engage in all phases of the project lifecycle, including requirements gathering, solution design, configuration, testing, and implementation of T24 modules.
• Configure T24 modules such as core banking, deposits, loans, payments, treasury, and other relevant modules based on business requirements.
• Good Knowledge in Temenos Payment Hub. Play a key role in the design and implementation of business and system functionalities across a multi-disciplinary team.
• Support users in preparation and deliver Business Requirements Documents (BRD). Prepare Functional Specification Documents (FSD), requirements scoping, sign-offs, planning, client interactions, prioritization, elicitation, review test cases and preparing training manual for user
• Offer solutions for product improvements and enhancements.

Your team:

• Work closely with business stakeholders to understand their requirements and provide expert guidance on leveraging T24 functionality to meet their needs.
• Collect and analyze requirements, and manage end-to-end operations related to T24 business functions.
• Engage in all phases of the project lifecycle, including requirements gathering, solution design, configuration, testing, and implementation of T24 modules.
• Configure T24 modules such as core banking, deposits, loans, payments, treasury, and other relevant modules based on business requirements.
• Good Knowledge in Temenos Payment Hub. Play a key role in the design and implementation of business and system functionalities across a multi-disciplinary team.
• Support users in preparation and deliver Business Requirements Documents (BRD). Prepare Functional Specification Documents (FSD), requirements scoping, sign-offs, planning, client interactions, prioritization, elicitation, review test cases and preparing training manual for user
• Offer solutions for product improvements and enhancements.

Your expertise:

• Extensive knowledge of Temenos T24 and TPH banking software, including experience in configuring and customizing T24/TPH modules to meet business requirements.
• For payments SME’s - Good knowledge in Payments Domain (Especially European payment flows and products SEPA, Target 2 etc.,)
• 5+ years of experience as a T24 and TPH Functional Consultant/Business Analyst, ideally within a banking or financial services environment, with a deep understanding of core banking processes and functionalities.
• Excellent analytical and problem-solving abilities with a talent for translating complex business requirements into effective T24 solutions.
• Strong communication and interpersonal skills, with the ability to convey technical concepts to non-technical stakeholders effectively.
• Should take full accountability of the deliverables and work with all the stakeholders (IT & Business) for a smooth implementation of the requirements
• Good collaboration with all the business and IT teams to ensure there is no ambiguity of requirements for implementation and support there after

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries*.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Purpose and Scope

The Contracts Engineering team plays a pivotal role in managing the financial & contractual provisions which is crucial to the successful delivery of building projects.

Responsibilities:

• Manage the financial & contractual provisions of all projects from pre-tender to post contract phases including quantities, variations, cost estimates, monthly claims, final accounts etc
• Work closely with Project Manager in preparing monthly updated project costing
• Develop suitable subcontract conditions for specific project requirements
• Prepare project budgeting and costing reports
• Responsible in cost estimating, quantity take off, claims preparation, variations and final accounts.
• Review of contracts, prepare tender & contract documentations, tender analysis & reporting, measurement etc
• Review sub-contractors claims and materials on site
• Standardize all agreements (e.g. subcontracts and joint ventures) with alignment to contract policy

Requirements:

• Degree in Building/ Construction Management/ Quantity Surveying or its equivalent.
• Minimum 3 years of relevant experience in construction industry.
• Strong in negotiation skills.
• Good understanding & knowledge of contracts law and its application.
• Preferably well versed in various form of contracts such as PSSCOC, SIA and FIDIC as well as other international form of contracts.
• Preferably conversant in using CostX and/or Glodon Cubicost measurement software.
• Strong communication and presentation skills.
• Only Singaporean

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

Institution-first Mindset – Put the interest of the Group ahead of individual interests.

Collaboration – Deliver through collaborating across markets, businesses, and functions.

Accountability – Hold team and self-accountable to deliver on our commitments.

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Animal Science Care Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Title: DevOps - SRE (Google Cloud - GCP) Engineer

Responsibilities

• Design and project management of mechanical/electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc.
• Engineer shall be expected to carry out design work, attendance at consultants’ meetings and management of the relevant M&E aspects of the construction activities.

Requirements

• Bachelor degree holder in electrical engineering
• 2-6 years of experience under consultancy culture
• Design and implementation, able to attend meetings independently
• Able to multi-task and work in a fast-paced environment
• Possess initiative, drive, and ability to work independently
• Good interpersonal/communicational skills
• Experience as a consulting in the construction industry is a pre-requisite
• Working schedule: 4.5 days
• Mondays to Thursdays (8am-6pm/9am-7pm), Fridays (8am-12pm/9am-1pm)
• Office location: Central

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)