• Report to Project Manager / Site Manager for the Arrangement of work
• Liaise with consultants for the submission and approval of materials and shop drawings
• Responsible for planning, programming and monitoring of work progress on site
• Co-ordinate the inspection work by Resident Engineer and clerk of works
• Handling technical and engineering problems on site
• Ensure site safety and proper execution of site work procedure on site
• Monitor and co-ordinate the works of subcontractors
• Structure and Architectural work

Requirements:

• Civil Engineer preferably registered with PE Board
• Preferably possess RTO Certificate
• Min 2 – 3 years’ experience
• Entry Levels are also welcome to apply
• Those with construction work or design skills preferred
• Singapore PR / Singaporean

Job Description & Requirements

• Undertake construction supervision as RE of underground building works and civil infrastructure, involving site inspection, meetings and review of drawings and method statements in accordance to customer specifications, applicable codes, standards and other generally accepted practices
• Carry out independent design checks for temporary formwork and formwork support system
• Keep quality records of all works, monitor and report on work progress
• Review and comment on contractor's submissions
• To review and supervise safety, environmental and health matters
• Station full-time on site to support Senior Resident Engineers (SRE) and the QP(S) with projects

Requirements:

• Experience in Underground work/ viaduct work
• Minimum Diploma in Civil and/or Structural Engineering from an established institution and/or qualification accredited by JAC of IES/ACES as QSS
• Minimum 3 years of relevant experience as RE for LTA project (MRT, underground, tunnelling works) or PUB project
• Has good working knowledge of Geotechnical and instrumentation works and compliance to Singapore Building Regulations
• Good analytical ability with strong verbal and written communication skills
• Independent, organized with positive work attitude

Working Location:

• LTA / PUB projects

Responsibilities:

• Research in the short-range wireless technology innovations and applications with focus on Wi-Fi and UWB, and undertake one or more of the following responsibilities:
• Research the innovation of system architecture and key technologies of short-range wireless, and gain insights on the technologies and trends of short-range wireless;
• Propose efficient solutions for algorithms and problems related to short-range wireless and carry out related verifications.
• Involve the standardization of short-range wireless, propose innovative solutions to the identified problems, and prepare contributions to promote your solutions.

Requirements:

• Master/PhD degree in Communications, Electrical & Electronics, Computer Science/Engineering or related discipline, with strong background on signal processing and/or protocol design for communications, positioning and/sensing.
• Good knowledge on IEEE 802.11 protocol family (e.g. 802.11n/11ac/11ax/11be) and/or IEEE 802.15 protocol family (e.g. 802.15.4z) will be a plus.
• Skills in wireless system simulation using Matlab, C/C++, NS-3 and/or other tools will be a plus.
• Excellent written and verbal communication skills, and interpersonal skills.

Interested candidate who wish to apply for this position, please click on APPLY NOW

EA License No.: 01C4394 | PERSOLKELLY Singapore Pte Ltd

EA Registration No.: R23117518 | Heah Sian Wei

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services, complying with Government’s COVID-19 health advisories and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries.

Responsibilities:

• Undertake construction supervision as RE of underground building works and civil infrastructure, involving site inspection, meetings and review of drawings and method statements in accordance to customer specifications, applicable codes, standards and other generally accepted practices
• Carry out independent design checks for temporary formwork and formwork support system
• Keep quality records of all works, monitor and report on work progress
• Review and comment on contractor's submissions
• To review and supervise safety, environmental and health matters
• Station full-time on site to support Senior Resident Engineers (SRE) and the QP(S) with projects

Requirements:

• Experience in Underground work/ viaduct work
• Minimum Diploma in Civil and/or Structural Engineering from an established institution and/or qualification accredited by JAC of IES/ACES as QSS
• Minimum 3 years of relevant experience as RE for LTA project (MRT, underground, tunnelling works) or PUB project
• Has good working knowledge of Geotechnical and instrumentation works and compliance to Singapore Building Regulations
• Good analytical ability with strong verbal and written communication skills
• Independent, organized with positive work attitude

Working Location:

• LTA / PUB projects

Responsibilities:

• Design new test programs for 1st silicon validation of new product/technology startup which provides very important feedback for the appropriate groups responsible in refining the devices' quality and performance.
• Develop and maintain test programs of Micron NAND products to cater to customers' specifications, device performance characterization needs and analysis of customer returns.
• Optimize test programs by applying more efficient testing methods to reduce product test times and manufacturing cost.
• Automate test process by writing software scripts to improve work efficiency.
• Enhance test coverage to ensure excellent outgoing quality and customer satisfaction.
• Cooperate with product/equipment engineering departments to improve overall product yield as well as to develop customization from available test solutions in order to maximize Return Of Investment.
• Collaborate with test capacity and manufacturing departments to realize output goals.
• Develop and monitor process and engineering metrics to ensure stability, efficiency and effectiveness of test processes.

Requirement:

• Bachelors/Masters in Electrical/Electronics/Power/Mechatronics/Computer /IT Engineering or equivalent in Physics.
• Strong coding skill in either Python or C/C++ is a must; Experience in all 3 python/C/C++ is added advantage
• Familiarization Test software development/validation and unit testing is a must
• Hands-on experience in using debug/simulation tools like Verilog, Valgrind, Helgrind, etc is a plus
• Good understanding of semiconductor device physics will be advantageous
• Knowledge of Unix/Linux operating system will be an added advantage
• Prior experience in using Automated Test Equipment and program handling is a plus
• Drive continuous improvement initiatives in terms of test coverage to improve DPM and drive TTR improvements through code optimization during NPI and High volume manufacturing phases of the product.
• Ability to understand the system and product architecture and involve in discussion with stake holders during the End to End product design development to develop, deploy and improve test screens.
• Solid analytical problem-solving skills
• Excellent verbal and written communication skills

Directs and coordinates engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment and control devices. Determines conditions under which tests are to be conducted, and phases of test operations. Coordinates operational, functional and performance phases of tests. Analyzes and interprets test data. Prepares technical reports of for use by engineering personnel.

Responsibilities:

• Develop printed circuit board designs which satisfies the customer's requirements and follow customer’s established DFX guidelines

• Generate all data required for the fabrication, assembly, and test of printed circuit boards to aid in the downstream processes

• Library creation and schematic drafting in PADS

• Work from components placement to Gerber generation in PADS

• Design high dense PCBs for power supplies and microcontroller circuits

• Follow safety spacing and constraints for international standards like IEC60950, IPC9592B, etc.

• Generation of BOM, assembly drawings and fabrication drawings

• Gerber review using CAM350

• Work as a team with electrical and mechanical engineers

Requirements

• Diploma/Degree in Electrical & Electronics Engineering

• 3 to 5 years of experience in PCB design

• Minimum 5 years of PCB Design Experience for senior position

• Full-fledged experience in PADS Layout, PADS logic and CAM350

• Experience in single and multilayer PCBs up to 6 layers

• Working experience in SMPS is an added advantage

• Able to work independently and as a team

• Dynamic and excellent interpersonal skills

Location: Tuas, Singapore (Nearest MRT: Tuas West Road, 3 mins walk)

Salary Range: S$3,500 – S$4,000 (depending on experience and profile)

Working Hours: 8:00 AM to 5:30 PM, Monday to Friday (5-day work week)

Responsibilities:

• Manage project execution within budget and schedule.
• Prepare Bill of Materials (BOM) and coordinate with Design Department for workshop drawings.
• Ensure accurate documentation and client/vendor communication.
• Verify correct sizing of components and update Master Production Schedule.
• Lead project kick-off meetings and follow up on procurement details.
• Attend Factory Acceptance Tests (FAT) and site meetings if necessary.
• Coordinate with sub-contractors and ensure quality work.

Requirements:

• Diploma in Mechanical Engineering
• 2 years of Project Management experience
• Knowledge in AutoCAD 2D and 3D drawing

Interested applicants, please email your resume to [email protected]

Tan Li Lian

EA 01C3135

Reg R1100465

Company’s Profile:

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for AI Engineers to join their team and contribute to their ongoing success.

Location: Ang Mo Kio/Yio Chu Kang area

Job Responsibilities:

• Work with internal & external stakeholders on data-related technical issues and support their data infrastructure needs
• Work closely with data scientists to solicit data requirements to support modeling works
• Design, develop, document, manage and maintain data models, ETL processes, data warehouse, data management and pipeline solutions for large volume of structured/unstructured data from disparate sources and with different latencies (e.g. on-demand, batch, real-time, near-real-time)
• Define, monitor and report SLAs for data pipelines and data products
• Understand data security and governance standards or requirements to implement solutions that ensure adherence to these standards or meet such requirements
• Drive/execute data quality assurance practices
• Support data management solutions pre-sales initiatives, proposal development and provide post-sales support

Requirements:

• At least 2 – 3 years’ work experience in data engineering field, experience with master data management, data governance, data lifecycle management
• Education qualification in Computer Science, Data Science, Machine Learning or relevant field
• Proficiency with relational/non-relational/NoSQL database and enterprise data warehouse/mart
• Experience with big data technologies e.g. Hadoop, Spark, Hive, HBase etc.

Interested candidates may whatsapp your resume to 6421 4965. Only shortlisted applicants will be contacted.

Cassie Chan | R2197426

Talentsis Pte Ltd | EA No: 20C0312

Qualifications

• Degree in Engineering, IT or related discipline

• Cisco formal certifications (CCNP, CCNA etc)

Essential Experience

• 5+ years experience in similar positions on projects delivering complex software-centric real-time systems.

• Proven experience in leading small teams

• Demonstrated experience in the design of infrastructure and network architectures

• Demonstrated experience in the design of network architectures inline with security standards and policies

• Sound level of knowledge and experience with Unix/Linux (Redhat distribution preferred) Operating System

• Familiarity with a wide range of Computer and Networking hardware (preferably Cisco)

• Scripting (TCL/TK, Perl, & Shell)

• Able to work on multiple activities con-currently and effectively self-manage (autonomy)

• Experience with collective decisions and conflict resolutions

• Capability to manage various stakeholders having different objectives

• Proven capability to work in a multi-cultural environment and with variety of international customers.

• Aptitude to work effectively in a multi-disciplinary integrated team environment

• A positive attitude combined with excellent interpersonal and motivational skills.

• Sound judgement and independent decision-making capability where necessary

Location: Jurong East

Working hours - Mon – Fri, 8.30am – 5.30pm

Requirements

• Handling of equipment for military and security (eg Chemical Detector, Radiation detector, Biological Detection Systems for Military , Acoustic Hailing Equipment / System etc)
• IT software installation and configuration.
• Handling enquiries on products such as post-sales delivery of equipment
• Carry out maintenance,diagnostic analysis, trouble shooting and repair work for equipment.

Requirements

• Higher Nitec / Diploma in Electrical & Electronics Engineering with min 5 years relevant experience
• Experience in customer relations.
• Able to do Stand-by duty if required

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

About the Role:

A team member of RRC (Regional Repair Center) and will be responsible to perform repair of medical endoscopes in RRC. He is also responsible to strictly adhered to the process, safety and quality standards required to repair medical equipment. He also has responsibility to maintain the proper condition of repair workbench as assigned.

Roles and responsibilities:

· Perform repair of medical endoscopes

· Carry out workshop maintenance task assignments

· Ensure compliance with GDPMDS requirements at all times

· Perform 5S in individual and scope repair areas at all times

· Any other duties as assigned

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

· A competitive salary package including AWS and Variable Bonus

· 18 days of annual leave in your first year

· Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

· Diploma or ITE in Engineering / Biomedical Engineering

· More than 3 years of Medical Equipment service provision

· Personality: Team Player, meticulous and organized

· Traits: Steady hands and keen eyes to handle delicate components

· Electrical & Mechanical soldering skills

· Require critical thinking and problem solving skills

· Good with Microsoft Office

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

Key Responsibilities:

• Design, implement, and maintain CDN architectures to optimize content delivery.
• Configure and manage CDN services to enhance performance.
• Monitor CDN performance metrics and analyze traffic patterns to identify areas for improvement.
• Provide effective troubleshooting solutions for technical issues encountered during content delivery.
• Collaborate with development, DevOps, and network operations teams to resolve complex technical problems.
• Supervise junior engineers, providing mentorship and guidance.
• Collect and organize customer feedback to provide insights and improvement suggestions to the product and development teams.
• Maintain strong customer relationships by providing after-sales technical support through phone, email, and online chat.
• Implement security measures to protect content delivery from threats such as DDoS attacks.

Qualifications:

• Education: Bachelor's degree in Computer Science, Information Technology, or a related field.
• Experience: Proven experience working with CDNs (e.g., Akamai, Cloudflare, AWS CloudFront).
• Networking Knowledge: Deep understanding of networking technologies and protocols including TCP/IP, DNS, DHCP, routing, and switching; familiarity with network topologies.
• Programming Skills: Proficiency in programming languages such as C, Java, Python, JavaScript, and HTML for developing and optimizing CDN services; experience in scripting for automation using languages like Python.
• Language Skills: Fluency in English and Mandarin is required for effective communication with clients.
• Soft Skills: Excellent problem-solving skills, attention to detail, strong communication skills for effective collaboration with cross-functional teams, and the ability to work independently as well as in a group setting.

Work Environment:

This position requires shift work with the following schedules:

• AM Shift: 7:30 AM to 3:30 PM
• PM Shift: 3:15 PM to 11:30 PM
• Night Shift: 11:15 PM to 7:30 AM

For senior positions, there may be a requirement to work shift hours for 1 or 2 days per week.Shift allowances will be provided.

Employee Welfare:

We offer competitive employee welfare benefits that include:

• Medical and dental benefits
• Annual Wage Supplement (AWS)
• Performance Bonus (subject to company discretion)

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 6 years in semiconductor foundry module process,
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

Responsibilities:

• Assist the project manager with on and off site meeting pertaining to the technical issues
• Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project
• Proven problem solving and achievements work progress according to the work schedule
• Site supervision and able to coordinate well with sub-contractors, RE and RTO

Requirements:

• Candidate must at least a Diploma in Civil Engineering or equivalent
• Min 5 years relevant experience in the related field for this position
• Be able to work independently with minimum guidance
• Good team player

Backup Engineer is responsible for:

• Configure and administer Redundant Array of Independent Disks (RAID) storage and associated components

• Configure and administer Storage Area Network (SAN) and associated components; including Fibre Channel switch administration

• Configure and administer data restore and disaster recovery

• Configure and administer data backup clients and servers

• Maintain storage aspects of new server integrations, storage allocation, and Change Management

• Setup procedures to consolidate storage of data from different platforms (i.e. Windows, UNIX and LINUX)

• Troubleshoot and fix storage issues

• Perform routine equipment check and preventative maintenance

• Storage analysis, capacity planning and performance planning of storage components

• Document the policies and procedures to support the operational storage environment and participate in the design and ongoing refinement of procedures and policies

• Prepare reports on storage administration best practices, new technologies, etc. and recommend enhancements and configuration changes to improve and optimize storage

• Ensuring the data is accessible and recoverable.

• Developing, implementing and overseeing policies and procedures to ensure consistent storage provisioning, uptime, regulatory compliance and data protection.

• Involve in incident management, change request, service request and change request

Requirements:

• Past working experience in Cloud environment is an advantage

• Able to handle demanding service response and recovery turnaround

• Able to manage daily support tasks to meet stringent SLA requirements

• Excellent scheduling and multitasking skills

• Meticulous and process-oriented

• Good, hard-working attitude with ability to work well under pressure

• Good communication skills English (written, spoken)

• Good analytical skills with ability to work with others to resolve problems.

• Good organization skills, with ability to properly document and track information.

• Preferably with Microsoft Certification and/or ITIL certification.

• Dynamic, customer oriented, experience working in a fast paced environment.

• Good Knowledge of following products will be advantageous:

-Microsoft Azure Stack

-Commvault Backup and Recovery

-Isilon

*Office hour with offsite standby

A Senior Cloud Wintel Engineer focuses on managing and supporting Windows-based Cloud IT infrastructure in large enterprise environments. The primary responsibilities involve maintaining the Cloud Wintel (Windows and Intel-based) platforms, including servers, operating systems, and applications, while ensuring high availability, performance, and security.

You Will:

· Administration and troubleshooting of Windows Servers (Preferably Windows 2008 R2, Windows 2012, Windows server 2003).

· Able to Install of windows servers and has good troubleshooting skills for Wintel systems, knowledge in hardening and securing of Wintel systems.

· Advanced level of Administration of Windows server with active directory, DNS, DHCP and High Availability.

· Understanding of RAID, pros and cons of various RAID levels and decision making on the same in a given situation

· Microsoft cluster configuration, administration and troubleshooting.

· Working experience with various storages, precisely for cluster configurations is good to have.

· Working knowledge in SAN environment and storage space management from systems side is good to have.

· File system and quota management.

· Experience and knowledge on FTP and SFTP Client and Server Model.

· Experience and knowledge with installing and implementing VMware ESX server, VMware virtual Center, setting up V-Motion, HA, DRS, and related VMware products such as VM Workstation, VMware converter VM Backup products and other products for virtualization would be advantages.

· Experience provisioning, operating, and maintaining systems running on Azure

You Bring:

Active Directory Concepts:

· Understand and explain Domain & Forest structures, Organizational Units (OUs), Schema, and Global Catalog.

· Use tools like nltest, dsquery, and netdom for AD troubleshooting.

AD Infrastructure Components:

· Manage Domain Controllers including recovery methods (authoritative and non-authoritative restore, 3rd party tools).

· Diagnose and troubleshoot replication issues using repadmin and dcdiag.

· Understand and manage FSMO Roles, including their purposes and recovery procedures.

· Configure and manage DHCP, including scopes, SuperScopes, Failover, Static IPs, Reservations, Exclusions, and DNS settings.

· Utilize DNS tools such as Nslookup, Test-DnsServer, ipconfig, tracert, and DNS Query.

· Support and troubleshoot Active Directory Federation Services (AD FS) for SSO.

· Address time synchronization issues using NTP.

· Create and troubleshoot gSMA Accounts.

Authentication and Authorization:

· Manage Kerberos authentication for both Windows and non-Windows (Linux) systems.

· Maintain and resolve LDAP authentication issues.

· Implement and manage Access Control Lists (ACLs) effectively.

Group Policies:

· Enforce configurations on users and computers through Group Policy Objects (GPOs).

· Use GPOs to manage security settings, software installations, and scripts.

AD Management Tools:

· Proficient in Active Directory Users and Computers (ADUC).

· Intermediate to expert skills in PowerShell.

· Knowledge of AD Administrative Center (ADAC) is a plus.

Integration with Other Services:

· Support AD FS onboarding and troubleshooting for SSO solutions.

Troubleshooting and Diagnostics:

· Review and analyze event logs to identify and resolve issues.

Tech Refresh:

· Study and propose improvements for AD design best practices.

· Implement and upgrade DC, DHCP, and DNS roles on newer OS versions.

· Understand and manage AD functional levels and raise them as necessary.

Windows Patching:

· Enroll new servers with WSUS & SCCM, manage monthly patches, and troubleshoot patching issues.

Business-As-Usual (BAU) Duties:

· Take ownership of and resolve assigned tickets within SLA.

· Create and improve Standard Operating Procedures (SOPs).

· Collaborate with team members and mentor junior engineers.

· Exhibit flexibility with working hours and maintain professionalism in customer interactions.

· Ability to identify and gather requirements to define a solution to be built and operated on Azure

· Capabilities to provide AZure operations and deployment guidance and best practices throughout the lifecycle of a project

· Experience with application / data migration to AWS

· Understanding about the ITIL process

· 5 - 8 Years of System Administration Experience is must.

· Must be a Graduate in Engineering / Science / Diploma in Computers

· Preferably with any two of the given Certification – MCSE / VMWare Certification

· Must have good communication & Interpersonal Skills

· Must be customer-focused

· Good problem-solving skills

DUTIES & RESPONSIBILITIES:

1. INTERNAL CO-ORDINATION WITH ENGINEERS/SUPERVISORS AND CONTRACTORS

2. CHECKING OF SUBCONTRACTOR’S CONTRACTS

3. CHECKING OF SHOP DRAWINGS

4. SITE SUPERVISION AND PROGRESS MONITORING

5. CHECKING OF PROGRESS CLAIM

6. CHECKING OF PAYMENT

7. SAFETY

8. WORK QUALITY CONTROL

9. CHECKING OF OPERATION & MAINTENANCE MANUAL

10. COMISSIONING, CHECKING & MONITORING

11. CHECKING OF AS-BUILT DRAWING

12. CHECKING OF COST ESTIMATION

Job scope:

Central effort to check and handhold project teams to make sure that they have fully onboarded to enterprise compliance platforms and have proper, sustainable processes in place to fulfil IT compliance requirements

Job responsibilities:

• Responsible for validating security and compliance solutions for enterprise applications and databases in data centers and cloud services in accordance to IT policies.

• This role is responsible for validating security and compliance solutions for enterprise applications and databases in data centers and cloud services in accordance to IT policies.

• This involves providing guidance and hands-on implementation in the design, configuration and troubleshooting support in the areas of logs, patch, vulnerability and configuration management leveraging enterprise platforms and technologies

• IT Security remediation and IT Policy implementation.

Job requirements:

• Shall have at least Two (2) years of experience in at least one security and compliance technology and product such as vulnerability assessment, logs management

• Product certification in one or more of the industry toolsets and platforms is advantageous

• Familiarity with IT compliance standards in a variety of technical environments, including Windows, Linux etc is advantageous

• Experience in IT audit is advantageous.

• Familiarity with IM8 or equivalent ICT policies is advantageous

• Any of these certification: CSA, CISA, CISSP, CISM and CRISC is advantageous.

Responsibilities:

• Design, implement, and maintain scalable and secure cloud infrastructure on AWS.
• Manage and deploy applications using containerization technologies, with a strong focus on Red Hat OpenShift.
• Develop and optimize CI/CD pipelines using Jenkins to ensure smooth and efficient delivery of software releases.
• Collaborate with cross-functional teams to troubleshoot and resolve infrastructure and deployment issues.
• Implement and manage Nginx configurations for load balancing, reverse proxy, and other web server-related tasks.
• Ensure the security, availability, and performance of production systems.

Profile

• Bachelor's degree in Computer Science, Engineering, or a related field, or equivalent experience.
• Minimum7 years experience as an AWS DevOps Engineer
• Proven experience as a DevOps Engineer with Blockchain experience in Singapore public sector or Financial Institution is a plus
• Hands-on experience of AWS services and infrastructure as code (IaC) principles.
• Expertise in containerisation technologies, especially RedHat OpenShift and/or Kubernetes
• Proficient in scripting languages such as Python, Shell, or Bash.
• Strong knowledge of CI/CD concepts and hands-on experience with Jenkins pipelines.
• Familiarity with Nginx for web server configurations and optimisations.
• Excellent problem-solving and communication skills.
• AWS or other relevant certifications are a plus.

We specialize in supply and installation of Security Systems.

4) Job Scope:

- Able to hands on Networking & Security systems installation, testing & commissioning, programming, maintenance, system troubleshooting (i.e. especially CCTV security system, ACS door access system, Electrical, alarm system)

- Preparation of project schedule, safety documents for safety submission (i.e. risk assessment, method statement, etc)

- Coordinate with site supervisor/ client/ sub-contractor/ main-con for site work related matters such as installation, testing & commissioning, etc to ensure smooth execution of site work.

- Liaise with main-con/ sub-contractors/ client for arrangement of materials, equipment, tools and other sub-contracting work activities.

- Coordinate/ participate in regular customer meetings/ site meeting on project related matters.

- Support other team members at site as needed.

- Manage & comply with Workplace Safety & Health for project execution.

- Other duties as assigned.

5) Requirement:

- Diploma in Electrical engineering or related studies in Mobile Communication Technology (Network Design and Management).

- More than 3 years of project management experience in related field

- Experienced in handling multiple projects

- Possess effective organizational and follow-up skills, meticulous

- Good interpersonal skills and able to interface with all levels, internally and externally in professional and responsive manner

- Attended safety courses/ possess work at height, BCSS supervisor, scissor lift, etc

- Capable of interpreting building schematics drawings, electrical drawing/layout

- Good oral and written communication skills

- Knowledge in Microsoft, AutoCAD

- Able to work independently with minimum supervision.

- Works well under pressure

- Well time management

- Specialise in networking system.

6) Working hours:

- 5 days/ week (Monday-Friday) 0900-1800hrs,

- OT allowance

- immediate vacancy position, performance bonus

- Career development and opportunities

- Positive, friendly working environment

Job Description

• Industry/ Organization Type: Marine Offshore Engineering
• Position Title: Project Coordinator Engineer/Junior Marine Engineer
• Working Location: Islandwide (Office at Pioneer)
• Working Hours: 5.5 days (Monday to Friday – 8.00am to 5:00pm, Saturday – 8.00am to 12.00pm)
• Salary Package: Up to $2800 + OT + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Provide expert technical and engineering advice to both the engineering and production teams.
• Lead and manage projects, including planning, coordinating activities, and allocating resources effectively.
• Offer guidance and support to less experienced engineers, enhancing their professional development.
• Represent the company in meetings with partners, clients, and vendors, ensuring clear and effective communication.
• Communicate project details accurately and effectively to both clients and project teams.
• Ensure that client requirements are addressed promptly and satisfactorily.
• Maintain the project schedule by overseeing progress, coordinating activities, and resolving any issues that arise.
• Any other assigned duties.

APPLY NOW!!!

• Minimum 3 years of relevant experience in marine engineering.
• Strong knowledge of ship structure fabrication.
• Possession of a Class 2B or Class 3 driving license will be advantageous.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #72068 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Marine Maintenance/Services
• Position Title: Service Engineer
• Working Location: Islandwide
• Working Hours: Flexible – must be on standby 24/7 to respond to client calls
• Salary Package: Up to $4,500 +OT + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Perform diagnostics, maintenance, and repair work on DF engines and other marine propulsion systems.
• Conduct routine inspections and troubleshoot engine issues to minimize downtime.
• Provide technical support and expertise to clients, ensuring optimal engine performance.
• Collaborate with the engineering team to develop and implement maintenance strategies.
• Prepare detailed service reports and documentation for all completed work.
• Ensure compliance with safety regulations and industry standards during all service activities.
• Travel to client sites as required to perform on-site maintenance and repairs.

APPLY NOW!!!

• At least a Diploma in Marine & Offshore Engineering, Mechanical Engineering, or Electrical Engineering.
• Minimum of 2 years of experience in engine repairs and maintenance, preferably within the marine industry.
• Experience with DF engines is highly preferred.
• Able to travel to client sites as needed, sometimes on short notice.
• The position requires flexibility in working hours, as the engineer must be on standby 24/7 to respond to client calls.
• Ability to work in varying environments and under pressure to resolve issues promptly.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #68647 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Overview

Manage the installation, maintenance and troubleshooting of chilled water and direct-expansion (DX) type HVAC equipment. Knowledgeable with HVAC market trends and understands what motivates customers to engage our services.

Responsibilities of Role

• Manage and lead team to install chilled water and direct-expansion (DX) type HVAC equipment. Perform testing and commissioning of equipment and system after.
• Able to carry out preventive maintenance of chilled water equipment such as air and water cooled chillers, cooling towers, and fluid pumps. Proficient in troubleshooting breakdowns and carry out repairs where necessary.
• Able to carry out preventive maintenance of direct-expansion (DX) type equipment such as single, multi-split, and VRF DX units as well as air and water cooled package units. Proficient in troubleshooting breakdowns and carry out repairs where necessary.

Skills and Proficiencies Wanted

• Exceptional interpersonal skills with the ability to build genuine relationships with internal team members and customers.
• Fine decision making, possess good problem solving and project management abilities.
• Willing to travel to meet partners.
• Appreciation of Microsoft Office Word, Excel, PowerPoint, AutoCAD.

Preferences

• 5 years working experience in the HVAC industry.
• Possess a valid driver’s license and owns a vehicle.
• Diploma or Bachelor’s degree in Engineering, or National ITE Certificate (Nitec) in relevant disciplines.

Requirements:

• Minimum Qualification: Engineering graduates from Electronics/Instrumentation
• Experience: 8-10 years
• Must Know: DeltaV™ Process Control System (or PCS) Setup and Configuration for Pharmaceutical industry, DeltaV Batch Implementation

Responsibilities:

• Contribute to projects that involve technical subject matter, technical methodologies, or other areas requiring understanding of complex Control systems

· Contributing to the successful completion of specific DeltaV™ engagements

· Ability to identify clear decisions or recommendations that may emerge from meeting discussions

• Helping in project scheduling and budgeting of projects
• Design & implementation of PCS system with focus on BATCH design, Batch Implementation, configuration, testing on EMR DeltaV™ internal system and Customer site system
• Experience in handling customer site and commissioning activities, Support activities
• Ensuring the compliance to the project quality standards
• Preparing project documentation & records
• Interacting/coordinating with cross functional teams of other global office to ensure consistency in project deliverables
• Responsible for project planning, scheduling, cost control, progress reports, quality and reviews for assigned scope
• Responsible to engage with overseas country Customers and doing necessary project coordination with Customers, Engineering Contractors and/or Consultants
• Achieving cost & time targets for assigned scope

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyze and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Bachelor’s degree in computer science, Software Engineering, or a related field (Advanced degrees are a plus).
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis)
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.