Job Scope

• Manage and execute project in cost effective, on time delivery with quality standards to meets client expectations;
• Managing the projects in accordance to our Company’s ISO 9001, ISO 14001 & OHSAS 18001 Standards and contractual requirements;
• Pre and post-contract stages from vetting tender documents, organizing tender activities as well as settlement of accounts with owner, sub-contracts / suppliers;
• The development and implementation of project management plans through the provision of project scheduling, monitoring, reporting and forecasting, ensure that safety regulations are complied;
• Providing and preparing all scheduling, budgeting and specification for the project work;
• Check drawings and quantities and ensure that the calculations are accurate for the project implementation;
• Carry out project planning, cost control, project management and documentations;
• Provide the direction in construction planning, coordinate work with other departments, sub-contractors, clients and consultants to ensure overall construction progress as scheduled;
• Liaise and assist in submission of all necessary permit, license to all relevant authorities for the project work;
• Attend meetings, correspondences and liaise with clients, sub-contractors and suppliers;
• Resolve design and site problems encountered during the construction period;
• Plan and manage actual and post construction issues with the clients, consultants, sub-contractors and relevant authorities;
• Ensure proper documentation of the project, such as record correspondence, as-built drawings, etc..;
• Close supervision of work carried out by sub-contractors and suppliers to ensure adherence to project schedule;
• Ensure highest quality on the work carried by the sub-contractor, fabricators and suppliers;
• Liaise with consultants, clients, sub-contractors and suppliers on the implementation of the projects;
• Check on the progress claim submitted by the sub-contractors;
• Monitor, track, report project progress, supervise Engineers, Supervisor, Technicians and sub-contractors’ on site;
• Follow-up on the defective work and ensure timely rectification by contractors, fabricators and suppliers;

Job Requirement

• Recognized Degree by BCA in Civil Engineering.
• Experience in Civil Engineering Projects, especially in Marine Construction of Jetty, Wharf, Harbour, Dredging, etc.

Job Description & Requirements

Responsibilities:

· Direct and Supervise WIP and Final Inspections

· Handle and Approve First Article Submissions

· Understand & Ensure Compliance with customer’s requirements

· Monitor, maintain and continually improve quality standards.

· Resolve Quality issues with internal and external parties.

· Supervise and maintain calibration of measuring equipment

· Review on non-conformances & approve disposition actions.

· Create 8D reports.

· Provide periodical quality review and trainings

· Involve in First Article Product and process development

· Assist in maintaining ISO System, reports, follow-up and closure

Requirements:

· Minimum Diploma in Mechanical/ Manufacturing or related Engineering field.

· Minimum 5 years in related field.

· Knowledge on measuring and statistical techniques

· Knowledge on CMM Machine

· Responsible, Positive Attitude and able to work well as a team.

· Able to lead a team of quality operators

· Able to work in Tuas area

· Class 3 license is an advantage

If you are interested to join our enriching and challenging environment, please submit a comprehensive resume to: [email protected] to include:

1. Recent passport-sized photo

2. Current Salary

3. Expected Salary

4. Notive Period

Job Responsibilities:

• Lead and direct cross-functional team in program execution
• Ensure proper qualification of new projects and successful implementation of programs in the production/manufacturing unit
• Track and monitor project progress to ensure project schedules and cost objectives are met
• Actively follow on sales leads and take lead in business development
• Serve as primary technical contact with customers on strategic or politically sensitive issues
• Provide support to BD manager in generating quotation for molding projects involving new toolings
• Provide customer support and perform in BD activities to direct customers; Serve as primary technical contact with customers on strategic or politically sensitive issues
• Work with Manufacturing on developing and establishing workflows and production concepts (to optimize production efficiency &meet customers’ requirements)
• Identify and specify engineering requirements for new projects
• Initiate equipment procurement activities for new projects when needed (with Purchasing)
• Plan and execute tooling qualification activities with supporting groups to achieve successful project execution
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Job Requirements:

• Diploma/ Degree in Mechanical Engineering or related
• Minimum 3 years of working experience in project management & production process
• Plastic injection moulding and mould assembly background preferred

Note

The above statements reflect the general tasks, duties, activities and/or responsibilities necessary to describe this position and is not intended to set forth all of the specific requirements of the job. These job duties/responsibilities may change or vary in response to business needs.

Project Engineer

This role is a newly expanded role for a European MNC who is a APAC leader in industrial and material handling products, services, and solutions for various application such as automated warehousing, building maintenance, automotive and others. Come join this role and be part of the active players in this growing industries

Key Roles and Responsibilities

· Report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals.

· Assist Project Manager in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.

· Prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.

· Manage day to day project activities including scheduling, coordinating and monitoring and reporting update of projects

· To supervise the execution of the works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract document

· To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.

· Liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist in verifying progress payments and claims from Contractors.

· Attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule

· Establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications.

· Be the primary focal point between various parties

Qualifications & Experience

· Diploma or Bachelor’s Degree in Electrical Engineering/Electronics/Control Systems Engineering or related disciplines

Preferred Skills & Characteristics

· Self-starter and ability to self-manage strong interpersonal and leadership skills

· Must have high level of integrity, able to generate trust and build alliances with co-workers

· Familiar with Job Safety Analysis, Work Method Statement and Permit to Work application requirements and procedures

· Ability to maintain good project documentation and is familiar with ISO documentation requirements

· Safety certifications such as Working at Height, Construction Safety Orientation Course etc. is advantegeous

· Basic knowledge on Industrial Control Real Time Systems such as PLC/SCADA/IoT

· Additional skills in AutoCAD, Revit and Microsoft Office are advantageous

If you are keen to apply for this role, please click auto-apply

HRLinked Asia Search & Consultancy Pte Ltd (Registration No: 201910702W)

Able to assist in tender pricing of ACMV project/ Alteration & Additional Work.

2. Data Entry for the project material delivery, Bill of Quantity and Tender Pricing.

3. Serves as liaison between the user and in-house contractor on all ACMV related system.

4. Provide sizing and design of ACMV system (chilled water) for individual room

5. Coordinate with supplier / sub-contractor of the tender specification and obtain the quotation from them

6. Control and supervise workmen to make sure standards of building performance, quality, time and cost schedules, and safety are complied.

7. Responsible for keeping daily work record, including additional work claims to the clients and from the subcontractors

Flex Logistics is a fast-growing Healthcare Supply Chain On Demand startup in Singapore. For more details, please visit our website https://www.flexlogistics.sg/. We are in the hunt for a highly driven, motivated and aggressive Field Engineer to join our highly talented team in a fast-growing startup at the early stages of growth.

What you can expect?

Direct exposure and training with Founder and inner workings of a start-up. Potential growth opportunities within the firm

We are looking for?

1. Talented individual who is not afraid of challenges and failure

2. People who is able to work in ambiguous environment

3. Strong entrepreneur spirit and able to think out of the box

How you’ll shape our journey

• Support offsite servicing of IoT devices at clients sites.
• Support CTO in building of future IoT solutions for clients
• Support CTO in designing, fabricating and implementation of solutions.
• Collaborate with Sales Teams in deal pursuit pitches
• Subject matter expert in designing and optimizing shelving load capacities for clients.

We are looking for?

· Proficient in Python and C++

· Able to work with PCB and circuits board, soldering etc

· Confident in operating basic tools, drills, electric saws, electric cutters

· Comfortable in fabricating basic shelvings and racks

· Possesses an open mind and willing-to-learn attitude

· Meticulous and have an eye for details

· Talented individual who is not afraid of challenges and failure

· People who is able to work in ambiguous environment

· Strong entrepreneur spirit and able to think out of the box

· Team player with a positive, pleasant & outgoing personality

· Fresh graduates are welcome to apply

· Self-motivated & results oriented

· Independent & resourceful

· Competent in problem solving & possess strong analytical skills

· Able to multi-task in a fast-paced environment

· Good communication skills

This role reports directly to the Co-Founders and CTO of the firm

ONLY APPLY THROUGH CAREERFUTURE OR EMAIL [email protected] (WE DO NOT POST OUR JOB IN ANY OTHER PLATFORMS)

• Designing, developing and enhancing electro-mechanical systems and mechatronic devices.
• Creating automated systems and the software to control them.
• Conducting research, documenting findings, and presenting reports at meetings.
• Developing design documents for mechanical parts and final products.
• Identifying areas of weakness in the Equipment and making recommendations for improvement.
• Understanding problems or client briefs and developing solutions that satisfy them.
• Selecting the required tools and materials for the process.
• Assisting with recruitment, onboarding, and training of junior Engineers or Apprentices.
• Attending workshops, training sessions, and conferences to network with others and stay on top of field advancements.
• willing to do night shift
• any service requirement from the site must go and attend any time
• Willing to work Night Shift

Performs site engineer responsibilities for

managing all aspects of the construction,

installation, maintenance, and repair of

electrical power lines, electrical systems,

fixtures, apparatus, and appliances.

This individual is responsible for planning,

scheduling, assigning, participating in, and

inspecting the works of power linesmen,

electricians, and trades helpers. The employee

also has responsibility for supervising the

operation of an electrical repair shop. Work

includes the design and construction of

special electrical apparatus and fixtures and

the preparation of specifications and

estimates for construction, repair, and

installation projects. Large scale and complex

jobs are normally inspected upon completion

for conformance with specifications; smaller

jobs are checked for satisfactory operation by

the users of the equipment. Work is

performed under general direction of an

administrative superior and is reviewed

through discussions and inspection of

completed work.

DUTIES AND RESPONSIBILITIES

Plans, assigns, schedules, and supervises the

work of power linesmen, electricians, and

helpers engaged in the construction,

installation, maintenance, and repair of university power lines, electrical systems, fixtures, apparatus, and appliances;

participates in the more difficult work.

Trains and instructs subordinates on detailed

procedures. Conducts periodic inspections and gives onsite

supervision over hazardous or unusual

work assignment is; assures availability of

equipment, materials, and supplies.

Estimates the time and material costs

required for projected jobs; keeps cost and

job records and submits reports; initiates

requisitions for supplies, tools, and

equipment. Troubleshooting of all Electrical &

ELVS PLC Knowledge preferred

Perform & Supervises the installation of all

Electrical & ELVS

Enforces safety regulations, rules, and working

conditions.

Recruits and trains personnel in the safe

operation of equipment and tools.

EDUCATION AND EXPERIENCE:-

Degree or Higher ; 4 years of related

experience including site engineer or lead

experience and considerable experience as a

Lead Site Engineer or any equivalent

combination of training and experience.

Excellent communication skills.

KNOWLEDGE, SKILLS AND ABILITIES:-

Thorough knowledge of the practices,

methods, equipment, materials, and tools of

the electrical trade.

Thorough knowledge of the occupational

hazards and safety precautions of the work.

Ability to supervise the work k of skilled

workers.

Considerable knowledge of the National

Electrical Code for electrical installations.

Ability to interpret and work from instructions,

pencilled plans and sketches, and blue prints.

Ability to communicate and coordinate with

superiors, subordinates, vendors and Ability to estimate materials and labour costs.

Skill in the use and care of all hand and shop

tools and equipment of the electrician's trade.

Mandatory Skills

We are seeking a skilled and motivated Data Engineer with expertise in Scala, SQL, and Hadoop to join our dynamic team. In this role, you will design, develop, and maintain scalable data pipelines and systems to process large datasets. You will collaborate with cross-functional teams to deliver high-quality solutions for data storage, transformation, and analytics.

Key Responsibilities

Data Pipeline Development

o Design, build, and optimize scalable data pipelines using Scala and Hadoop frameworks.

o Implement ETL processes for ingesting, transforming, and storing data from various sources.

Data Analysis and Query Optimization

o Write and optimize complex SQL queries for efficient data retrieval and transformation.

o Troubleshoot and resolve performance issues in queries and data workflows.

Big Data Ecosystem Management

o Manage Hadoop-based data infrastructure, including HDFS, Hive, and related components.

o Monitor system performance and optimize resource utilization in a distributed environment.

Collaboration and Problem Solving

o Work closely with data analysts, data scientists, and business stakeholders to understand requirements and translate them into technical solutions.

o Provide technical guidance and best practices for data engineering within the team.

Automation and Monitoring

o Develop scripts and tools to automate repetitive tasks and enhance system monitoring.

o Ensure data quality and consistency through validation and monitoring mechanisms.

Documentation and Compliance

o Document technical solutions, workflows, and processes to ensure knowledge sharing and reproducibility.

o Ensure compliance with data governance and security policies.

Skills and Qualifications

Technical Skills:

o Proficiency in Scala programming and functional programming principles.

o Strong SQL skills, including query optimization and database design.

o Hands-on experience with Hadoop ecosystem tools (HDFS, Hive, YARN, MapReduce).

o Familiarity with other big data tools like Spark, Kafka, or Flink is a plus.

Problem-Solving:

o Strong analytical skills with the ability to troubleshoot and resolve complex data issues.

Communication:

o Excellent communication skills to effectively collaborate with technical and non-technical stakeholders.

Experience:

6+ years of experience in data engineering, big data technologies, or a

similar role.

The incumbent is responsible for managing all phases of the project activities including planning, implementation, execution and completion of gas and chemical supply equipment, installation and certification. He/She will have direct interface with the Project Manager or FAETH associated companies

JOB DESCRIPTION

• To manage, lead and control multi-projects.
• Direct interface with customers or sub-contractors for all aspects of their project contract and schedule including organising the project meeting for technical presentations, contract reviews and design reviews and providing project progress reports for management or customer review.
• Direct interface with other Faeth associated companies in managing the resources and obtain the necessary engineering, design or process information required to manufacturer, install and qualify the system and equipment.
• To take charge in project planning and implementation including developing detailed project plans defining project task and to manage project resource allocation and project budget, scheduling of project timelines and tracking of project deliverables to meet the project targets.
• To liaise and manage suppliers and subcontractors to complete system or equipment installation works.
• To coordinate with the onsite subcontractors, Faeth team and the customer for equipment testing, operation and commissioning activities.
• To observe the Quality Management function and Project Quality Plan (QMS/PQP) and Safety Management System (SMS) and requirements throughout the project.
• To implement best practices throughout the project sites and participate in discussions with the teams for effective management and utilisation of constrained resources.
• To prepare and manage all safety inclusive of Work Method Statement, Risk Assessment, Permit to Work and others permit associated with the work.
• To prepare, manage, and maintain service reports & permits to work as required by the customer for equipment related items.
• To work towards the project schedule as planned and ensure that the equipment works as per the contractual specification.
• Commissioning activities as planned plus ensuring that the equipment works according to its specifications.
• To prepare, collect, review, manage, and maintain project design and start-up documentation (certificates, test sheets, etc) with customers, consultants and the authorities required by customers for final acceptance of the system or equipment.
• To ensure the certification of all systems and equipment supplied to the customer.
• Responsible for acting on, and solving all design or start-up related issues and customer complaint as swiftly as possible, with a minimum of inconvenience to the customer, and to keep the customer and Project Manager up-to-date on actions taken, together with a time plan for which the identified issues can be resolved.
• To perform maintenance and calibration and sampling tasks / duties as per Standard Operating Procedures (SOP) and Working Instructions (WI) as required.
• To perform preventive and corrective maintenance as scheduled; attend to unplanned downtime or breakdowns across all Faeth equipment & systems and dispatch personnel as required.
• To investigating problems, diagnosing/repairing faults and carry out field troubleshooting and repair of Faeth products at customers’ site both locally & overseas including component ordering.
• To provide training to end customer for Faeth equipment supplied based on the user manual, providing technical instruction and assistance to customer regarding installation, commissioning, operation, repair and maintenance of equipment.
• To collect feedback on customer’s experience or products quality issues and report to Product Design Team for product improvement.
• Upon completion of a project to participate in post mortem meeting with management for evaluation of the project results and project problem faced and provide recommendations to Management for future improvement.

JOB REQUIREMENTS

• Diploma/degree in Mechanical/Electrical/Chemical or equivalent
• At least 1 to 2 years’ experience with strong understanding of project planning, project management functions, sourcing and technical planning in semiconductor, oil & gas field.
• Fresh Graduates are welcome to apply for the position.
• Ability to communicate and interact with people at all level and to work cross functionally.
• A team player and a self-starter with the ability to work independently with minimum supervision.
• Strong analytical, planning, oral and written communication and interpersonal skills.
• Able to work in a fast pace and dynamic environment.
• Knowledge of Microsoft Project, AutoCAD or equivalent CAD/3D Software desired but not a must.
• Willingness to travel and be site-based.

An attrative remuneration package with comprehensive insurance coverage awaits the right candidate.

• Responsible for all site works and activities
• Ensure effective project planning and implementation, efficient use of resources, and proper co-ordination and delegation of works to successfully complete project by the contractual deadline and within the budgeted cost.
• Ensure all works carried out meet company’s quality standards and requirements
• Engage and coordinate internal resources, engineers, consultants, and solar installers in preparation and execution of project plans through completion.
• Review and take ownership of project budgets including cost of permits and fees, third-party consultants, and construction costs for off-site, site work.
• To ensure site supervisors, foremen and workers comply with client & regulatory requirements
• To ensure high Environmental, Safety and Health standards are upheld on site at all times
• Other ad hoc duties assigned by company from time to time

Job Description:

• Design wide range of mechanical / structure / company’s product.
• Analyse and interpret design schematics.
• Direct accountability in managing individual efficiency and completion of work schedule.
• Attend meetings with internal and external stakeholders to discuss on their requirements in new project and/or project proposals.
• Research and develop new ideas and concept to enhance company’s performance and competitiveness.
• Work closely with various Departments to ensure timely deliverance of projects.
• Adhere to design and process system in accordance with ISO 9001 guidelines and to constantly monitor and upgrade our quality standards.
• Any other ad-hoc tasks as assigned.

Requirements:

• Degree / Diploma in Mechanical Engineering with minimum 2 years relevant experience.
• Good knowledge using 2D & 3D design software (Solidworks).
• Good communication skills, positive mind-set, hardworking and able to multi-task.

Interested candidates, do send your resume to [email protected]. ONLY shortlisted candidates will be notified through email for an interview.

Job Description

• Responsible for the configuration, administration, monitoring and daily maintenance of enterprise-wide application such as Oracle, MS-SQL, Apache HTTPd, Apache Tomcat, JBoss , Websphere Application Servers, Kubernetes, Kafka, IBM-MQ.
• Interact with Software Development and infrastructure teams to implement application solutions and troubleshoot technical issues.
• Interact with software, network and infrastructure administrators to seamlessly solve technical issues.
• Troubleshooting web, middleware and database environments.
• Identify potential and real performance bottlenecks within web environments.
• Using troubleshooting methods to differentiate between an infrastructure or environment problem.
• Constantly update documentation as necessary to reflect system setup and environment.
• To handle escalation seamlessly to avoid any gaps that may arise to meet or exceed SLA.
• To utilise ITSM process and tool support.

Requirements

• Diploma/Degree in Information Technology/Computer Science/ Computer Engineering or equivalent.
• At least 4 years of working experience in a similar role.
• Working experience in Linux and Windows system.
• Strong implementation and administrative skillsets for Linux and Windows
• Good knowledge of MS-SQL and open-source solutions such as JBoss, Docker containers and Kubernetes container orchestration
• Prior experience providing enterprise-wide on-premises systems support.
• Must be a Singaporean citizen due to G50 security clearance requirements by the client.
• Possess analytical mindset.
• Possessed initiative that would improve productivity and efficiency.

Job Description

• Configure and manage critical systems, including Active Directory (AD), telephony, video conferencing, access points (AP), firewalls, VPNs, and more. Monitor and analyse the performance of LANs, WANs, and wireless networks to ensure optimal functionality.
• Configure laptops and desktops for new and existing staff, perform system backups, and handle disaster recovery (DR) as needed. Ensure all automatic system backups are in place.
• Apply system patches after hours to maintain system stability and security. Perform routine system checks to ensure continuous operations.
• Work with third-party support vendors to resolve technical issues. Participate in IT auditing and documentation to ensure compliance with company policies.
• Provide IT support for approximately 200 users, managing user accounts and roles within the ERP system. Troubleshoot login issues, assist with basic system navigation, and resolve minor technical problems.
• Monitor ERP system performance, address minor issues, apply updates, and generate routine reports for departments like finance, HR, and inventory. Customize reports based on user requirements.
• Maintain documentation for common IT processes, user guidelines, and troubleshooting procedures. Optionally, assist with creating and launching new business processes within the company.
• Perform routine backups, monitor system security, and follow compliance protocols under the guidance of the IT team.

Requirements

• Diploma or Degree in IT/Computer Science.
• Possess CCNA / Microsoft certification.
• Proven experience in providing technical support in a corporate IT environment.
• Experience with Veeam and Microsoft 365 administration.
• Familiarity with leading wireless vendors’ products (Cisco/Meraki, Aruba/HPE, Ruckus) is advantageous.
• Knowledge of virtualization technologies such as Hyper-V and VMware is a plus.
• Strong communication and administrative skills.
• Ability to manage multiple tasks and prioritize in a fast-paced environment.

We value all applicants and thank you for your interest. However, please be advised that only shortlisted candidates will be contacted.

Responsibilities

• Data Collection & Reporting: Assist in gathering, organizing and analyz-ing data from web based data, focusing on key performance indicators such as waste and recycling tonnage.
• Liaising with operations: Work closely with operational teams ensure timely and accurate submission of operations data. Provide support and guidance to operations as needed to improve data reporting processes.
• Data Accuracy & Quality Assurance: Perform regular data quality checks to verify accuracy, completeness, and consistency of sustainability data. Identify discrepancies or issues and work with local teams to resolve them.
• Updating of route plan masterlist: Assist in the updating process for new collection data points.
• Liaising with estate managers: Provide estate managers sustainability data in a timely and accurate manner.
• Data Entry & Updates: Ensure that all sustainability data is entered into the relevant tracking systems on time and in line with reporting sched-ules.
• Develop & Maintain Reporting Tools: Assist in creating and maintaining data dashboards and reports that provide real-time insights into sustaina-bility performance.
• Reporting Support: Help prepare periodic sustainability reports and presentations for internal stakeholders
• Collaboration & Communication: Work closely with customer service team to serve as a joint point of contact for sustainability data
• Ad-hoc Project Support: Assist with various sustainability initiatives and projects as required, providing data support and helping to implement new programs or processes

Requirements:

• Have at least 1-2 years of experience in sustainability data or related fields.
• Graduated from a diploma program in Environmental Science, Sustaina-bility, Engineering, Business, or a related field.
• Strong analytical skills, with experience in data collection, cleaning, and analysis.
• Proficiency in Microsoft Excel, Google Sheets. Data analysis tools (e.g., Power BI, Python) is a plus but not required.
• Interest in sustainability and environmental impact, with a willingness to learn and contribute to global sustainability efforts

Purpose: To design, develop, and implement automation solutions for system integration and machine assembly processes to enhance productivity, minimize human errors, and ensure high-quality outputs. The role will focus on leveraging AI and robotics to achieve automated assembly and inspection solutions.

Key Area of Responsibilities:

• Design and implement robotic systems for automated assembly processes.
• Develop AI-driven solutions for process optimization and defect detection.
• Evaluate current manufacturing processes to identify automation opportunities.
• Collaborate with cross-functional teams to integrate automation into existing workflows.
• Integrate robotics and AI systems with MES systems for real-time monitoring and control.
• Ensure seamless communication between automation systems and other manufacturing tools.
• Diagnose and resolve issues with automation systems, including robotic arms and AI algorithms.
• Conduct regular maintenance to ensure system reliability and minimize downtime.
• Train technicians and operators on the use of automated systems.
• Create and maintain technical documentation, including user manuals and troubleshooting guides.
• Ensure automation solutions comply with industry safety standards and company policies.
• Perform risk assessments to identify potential hazards and implement safeguards.

Qualification & Experiences:

• Bachelor’s or Master’s degree in Automation Engineering, Robotics, AI, Mechatronics, or a related field.
• Minimum 3-5 years of experience in automation engineering with a focus on AI and robotics.
• Proven track record in designing and deploying robotic systems and AI-driven inspection tools.
• Proficiency in programming languages like Python, C++, C# or Java.
• Expertise in AI frameworks (TensorFlow, PyTorch) including machine learning algorithm and robotic platforms (e.g., ABB, KUKA, FANUC).
• Familiarity with PLC programming and industrial communication protocols (EtherCAT, Modbus, IoT etc.).
• Strong problem-solving abilities and analytical thinking.
• Excellent communication and teamwork skills to collaborate with multidisciplinary teams.
• Certification in Robotics or AI.
• Safety certifications related to industrial automation (e.g., ISO 13849).

Responsibilities:

• Architect and implement transformative software solutions using the latest technology trends
• Lead in the design and development of key features, propelling our product portfolio to new heights
• Collaborate with multidisciplinary teams to build robust, scalable systems
• Contribute to creating high-quality, innovative software that meets the evolving needs of our clients
• Stay ahead of industry trends, harnessing emerging technologies to enhance our software solutions

Requirements:

• Degree in Computer Science/Computer Engineering/Information Technology or a related field
• A .NET guru with a deep understanding of modern software architectures, microservices, and API development
• Experienced in cloud-based development, containerization (Docker/Kubernetes), and infrastructure as code (Terraform/Ansible)
• A database wizard, adept in designing, managing, and optimizing databases (SQL, NoSQL, etc.), with a solid foundation in data analysis and machine learning
• Versatile across various operating systems including Linux, Mac OS, Windows
• An excellent problem solver with a keen eye for detail, and experience in agile methodologies and DevOps practices
• Familiarity with React.js, Node.js, and other frontend technologies would be an added advantage
• Candidates with more years of related work experience may be considered for a senior position
• Remuneration will be commensurate with experience

Engineering Project Managers are pivotal in steering complex engineering projects from conception to completion, ensuring that technical solutions are delivered on time, within budget, and to the required quality standards

Defining project scope, goals, and deliverables in collaboration with senior management and stakeholders

Developing detailed project plans that outline specific engineering tasks, timelines, and resource allocations

Coordinating cross-functional teams of engineers, designers, and technical staff to ensure project milestones are met

Managing project budgets, including cost estimation, budget tracking, and financial reporting

Ensuring compliance with industry standards, regulatory requirements, and company policies

Identifying, assessing, and mitigating project risks and issues throughout the project lifecycle

Communicating effectively with stakeholders to provide project updates, gather feedback, and make informed decisions

Conducting post-project evaluation to identify successful elements and areas for improvement for future projects

Continuously updating project documentation and maintaining accurate records for all project-related information

Leading and motivating project teams, providing guidance and support to foster a collaborative work environment

Leading and motivating project teams; assigning tasks and deadlines

Managing project budgets and resources, including adjustments as necessary

Identifying, assessing, and minimizing project risks throughout the project lifecycle

Directing the allocation of resources across various projects for optimal efficiency

• To plan and execute corrective/preventive maintenance on facility equipment and production equipment to ensure good efficiency and availability.
• Implement TPM program in HPSL such as autonomous maintenance and critical spare part management.
• Engage external equipment vendor for service contract and ad hoc diagnostic or corrective maintenance activities.

Support safety and EHS related activities and audits.

Description of Responsibilities and Duties

1. Plan and execute corrective/preventive maintenance on facility equipment and plant equipment to ensure good efficiency and availability. Generate equipment and facilities related records/reports/ documentations on above activities.
2. Implement TPM strategy. Responsible for tracking machinery spare parts usage, maintaining adequate quantity, critical parts requirement, spare parts management, continuous improvement, and ISO audits.
3. Support EHSS related topics, ensure site is in full compliance with Environment, Health and Safety (EHS) and Security regulation and policy.
4. Resolve various equipment performance issues internally before approaching equipment vendor. Review equipment log and technician feedback for quick solutions.
5. Liaise and co-ordinate jobs to be performed by contractors for facilities and plant equipment. Ensure work completion and achieve high standard of work.
6. Perform site EHSS inspection/audits and ensure that all corrective / preventive actions are close in timely manner. Responsible for internal/external audits and EHSS activities.
7. Interpret electrical diagrams and mechanical drawings for equipment troubleshooting with at least 3 years hand-on experience
8. Evaluate existing/new contractors’ performance and negotiate with them on quotations and service level.

Knowledge:

• Hands on experience in mixer and milling equipment maintenance is an advantage.
• Knowledge in TMP, Equipment FMEA is an advantage.
• Knowledge in facilities maintenance (Electrical, water, AC) is an advantage.
• EHS competence, familiar with ISO45001 & ISO14000 is a plus.

Skills:

• Able to read electrical, hydraulic, pneumatic and mechanical diagrams and carried out maintenance work accordingly.
• Lead and guide technicians on above work.

Abilities:

• Operational hands-on experience
• Work under pressure and multi-tasking.
• A good team player and have good interpersonal skills
• Safety conscious

Education:

Degree/Diploma in Mechanical Engineering or equivalent

Experience:

• Minimum 5 years of relevant working experiences
• Experience in chemical and mechanical process

Competencies:

• Fast Learner
• Willingness to learn
• Self-Initiative
• Team Spirit
• Self-responsibility
• Physical Fit

Working Conditions:

Chemical Production Environment. A skin allergy/blood count medical test may be required as part of the employment medical checkup.

Mandatory Skills

We are seeking a skilled and motivated Data Engineer with expertise in Scala, SQL, and Hadoop to join our dynamic team. In this role, you will design, develop, and maintain scalable data pipelines and systems to process large datasets. You will collaborate with cross-functional teams to deliver high-quality solutions for data storage, transformation, and analytics.

Key Responsibilities

Data Pipeline Development

o Design, build, and optimize scalable data pipelines using Scala and Hadoop frameworks.

o Implement ETL processes for ingesting, transforming, and storing data from various sources.

Data Analysis and Query Optimization

o Write and optimize complex SQL queries for efficient data retrieval and transformation.

o Troubleshoot and resolve performance issues in queries and data workflows.

Big Data Ecosystem Management

o Manage Hadoop-based data infrastructure, including HDFS, Hive, and related components.

o Monitor system performance and optimize resource utilization in a distributed environment.

Collaboration and Problem Solving

o Work closely with data analysts, data scientists, and business stakeholders to understand requirements and translate them into technical solutions.

o Provide technical guidance and best practices for data engineering within the team.

Automation and Monitoring

o Develop scripts and tools to automate repetitive tasks and enhance system monitoring.

o Ensure data quality and consistency through validation and monitoring mechanisms.

Documentation and Compliance

o Document technical solutions, workflows, and processes to ensure knowledge sharing and reproducibility.

o Ensure compliance with data governance and security policies.

Skills and Qualifications

Technical Skills:

o Proficiency in Scala programming and functional programming principles.

o Strong SQL skills, including query optimization and database design.

o Hands-on experience with Hadoop ecosystem tools (HDFS, Hive, YARN, MapReduce).

o Familiarity with other big data tools like Spark, Kafka, or Flink is a plus.

Problem-Solving:

o Strong analytical skills with the ability to troubleshoot and resolve complex data issues.

Communication:

o Excellent communication skills to effectively collaborate with technical and non-technical stakeholders.

Experience:

6+ years of experience in data engineering, big data technologies, or a

similar role.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum 5 years QA/QC experiences

· LTA Mrt experiences will be an advantages

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Description:

• Ensure high quality and timely completion of the assigned work within the established time, budget, including ensuring technical accuracy of drawings, material quantities, specifications, procedures, etc. produced by the Civil and structural discipline
• Prepare, Review, Check, Issue, and follow up on all Civil and structural deliverables up to the issue for the construction stage
• Perform engineering design calculations check and prepare design sketch as required
• Perform/ review steel connection design and steel fabrication drawing review
• Coordinate with other disciplines for inputs/comments on Civil and structural drawings before the construction issue
• Assist in internal & client model reviews in line with Company procedure
• Coordinate with the and Qualified Persons (QP)/ Professional Engineers (PE), involved in the project for timely delivery of Civil and structural documents for local permitting and authority submission
• Provide prompt resolution for all site issues and ensure no delay on the construction due to engineering & constructability issues
• Perform good communication/ coordination with Client

Requirements:

• Min degree in Civil Engineering
• Min 8 years of experience in design, coordination and field engineering of process plant or industrial building development (such as chemical/petrochemical plant/ incineration plant/ food waste, water/wastewater plant/ oil & gas/ refinery/ power/ pharmaceutical etc.)
• Hands on experience working in fast paced, diverse and multi-disciplined coordination
• Adapt with software for Civil/ Structural (both Concrete and Steel) design calculations such as STAAD.Pro, SAP, ETABS, SAFE, TEDDS, Idea Statica, Limcon, etc
• Have knowledge on AutoCAD, Revit, Tekla software for Structural Steel fabrication
• Familiar with Microsoft Word, Excel Spreadsheets, PowerPoint
• Conversant with Local and International Design Codes and Standards such as Euro Codes, British and American Codes for Civil Structural design
• Have knowledge in Local Singapore Civil & Structural Permitting Requirements
• Familiar with Civil & Structural design and drafting activities including ability to review 3D Design, SPR, Navisworks etc. and ability to manage/supervise BIM team
• Able to lead, motivate & guide a team comprising of Engineers/ Designers
• Must have experience in manpower planning and CSA design deliverables execution planning

• Perform site planning, coordination & inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met
• Assist in the implementation of project operations to comply with ISO 9001; 14001; 45001 standard requirements, documented procedures as well as client, companies, authorities’ requirements
• Update the progress of structural works in the Progress Reports
• Assist in commissioning including coordination structural engineering
• Maintain the proper documentation of inspection forms and other follow-up inspections from RE
• Support Quantity Surveyors in conducting site measurement and inspections
• Liaise with sub-contractors, suppliers and clients
• Work under the advice of the Safety Officer to adhere to compliance & safety requirements with regulatory and industry standards during the construction phase
• To ensure works are in compliance with quality procedures and within standard workmanship requirements

Requirements:

• Minimum Degree in Civil Engineering
• At least 3 years of local relevant experience in Construction industry; HDB preferred
• Good analytical, communication and interpersonal skills

Job Descriptions:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist for tender team.
• Research on the application and construction technology of new materials.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Calculation and design optimization of offshore photovoltaic structures.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Report on work progress during meetings.

Job Requirements:

• Preferably with a Degree in Engineering or related studies.
• Tender experience is preferable.
• Minimum 6 years of design engineering experience.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Act as team player.