The Rapid Response Damage Assessment (RRDA) program is seeking an Engineer or a Senior Engineer to assist with the modeling and analysis of vessel stability and hull strength for ships and offshore floating structures and verify their compliance with applicable Rules and Regulations.

· The RRDA program provides 24/7 technical assistance to ship and offshore floating structure related emergencies such as grounding and collision. When activated, RRDA is an extension of the vessel management team’s own response capability, focusing on the measure of changes occurring to hull strength, stability and the extent to which risk of pollution can be mitigated. This new position is expected to work along with a group of experienced engineers to respond to client service requests when emergencies occur or participate in routine vessel emergency response drills.

The RRDA work by nature of its complexity and difficulty require the fully competent application of conventional knowledge in a particular field of engineering or science. Through broader and more technically challenging work assignments, the ideal candidate will develop a thorough understanding of policies, methods and procedures.

What You Will Do:

• Under the supervision of an experienced engineer or the RRDA manager, develop analysis models and perform detailed engineering analyses to assess vessel stability and hull strength and verify their compliance with applicable Rules and Regulations.
• Perform work which involves conventional engineering practices but may include complex problems such as the resolution of limited information provided by the client, conflicting client requirements, or time constraints.
• Develop technically accurate and timely reports, and responses to client phone calls, emails and other forms of communication for review by an experienced engineer or the RRDA manager.
• Prepare accurate and timely weekly reports and billing on all work performed.
• Communicate the status of the current workload to all appropriate members of the team to meet the needs of clients.
• Standby for and respond to client service requests on the rotating shift
• May propose technical advice to field operations and other technical offices.
• May propose new approaches to problems encountered and make recommendations for changes in methods, procedures or designs.
• May work directly with clients to identify and resolve problems in the area of technical expertise.
• Work as a team member within the RRDA response team. May work autonomously, once trained, with limited supervision.
• Implements and maintains ABS Quality System requirements relative to responsibilities after undergoing ABS Quality System training.

What You Will Need:

Education and Experience

• B.S. degree in Naval Architecture, Ocean Engineering, Civil or Structural Engineering, or other related disciplines.
• Experience (coursework, research, or industry experience) with vessel stability calculations and ship and/or offshore floating structures is preferred
• Experience with stability software and/or salvage software such as Hecsalv, GHS, or NAPA is a plus.

Knowledge, Skills, and Abilities

• Knowledge of related technical disciplines required.
• The ability to identify, analyze and propose solutions to problems (i.e., the competence to demonstrate complex problem-solving skills).
• Good command of the English language.
• Ability to communicate orally and in writing.
• Ability to work well with others and sometimes within tight schedules

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem-linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the role

You will be part of a cross-functional agile engineering team (squad) responsible to build, deploy and run (support) one or more of our digital products, focusing on full-stack experience to build robust & resilient systems (front-end & back-end).

You will work closely with Engineers, Product, Design, and other stakeholders, collaboratively ensuring quality gets built in the product, get to see your impact in everyday lives of many people, and have great fun while doing it.

You will share your learnings within and beyond your team (squad) and mentor budding engineers for good engineering practices

What will you do

• Working with engineering+product owners to design, refine and develop the product, from concept to implementation.
• Main contributor in creating best in-class product & experience for our customers by designing, building, scaling, and evolving our platforms, services, and tools
• Communicate, collaborate and work effectively across cross functional teams in a multicultural environment
• Mentor a team of highly talented and motivated engineers
• Ensure the performance, security, and responsiveness of applications built
• Continuously improve code quality, product execution, automatization and customer delight

What you need to have

• You have at least 10+ years of professional experience in a similar role developing highly scalable applications
• Good written and spoken English
• Hands on expertise in Java / Javascript or its derivatives (Typescript, NodeJS, Scala, Kotlin, Springboot, etc)
• Have hands on experience on one of this front-end development (Flutter Preferred)
• Experience to Lean/XP practices (TDD, Pair Programming, Continuous Integration/Delivery for both Mobile & Back-end)
• Experience working in Agile Software development
• Communicate, collaborate, and work effectively across distributed teams in a multicultural environment.
• You’re excited about delivering end-to-end experiences and care about your software architecture across the front-end, back-end, and the APIs that glue them together
• A passion for quality and best practices but with a pragmatism that understands the
  balance between perfection and delivering value in a timely manner.
• Enjoys mentoring more junior engineers on good engineering practices & share knowledge

Responsibilities & Duties:

• Provide on-site services for new and existing customers, including equipment servicing and upgrades.
• Conduct technical analysis of product implementations, modifications, and enhancements to products in accordance with specific customer specifications.
• Update customer on the nature of service provided and recommends equipment repairs or system upgrade.
• Troubleshoots technical issues and recommends solution to customer.
• Provides technical analysis of equipment installation, modifications, and upgrade in accordance to customer’s requirements.
• Regular communication with customer to ensure high level of customer satisfaction.
• Duties includes but not limited to equipment installation, servicing, maintenance, repair, and relocation.

Requirements & Skills:

• ITE / Diploma in Electrical or Mechanical Engineering.
• At least 2 years on site experience preferred.
• Experience in Automation and/or Robotics preferred.
• Knowledge and experience in using Solid Works and PLC programming will be an added advantage.
• Good problem solving and communication skill.
• On the job training provided.

Responsibilities & Duties

· Identify and develop potential new customers

· Provide support and further develop existing customers.

· Marketing, promoting and selling of products.

· Provide advice on best solution and product to customers.

· Analyse competitors and market trend.

· Prepare quotations.

· Meeting of sales target and plan.

· Perform other duties as assigned.

Requirements & Skills

· Minimum Diploma in engineering, preferably Robotics and Automation.

· Minimum 2 years of experience in technical sales.

· Strong communication and sales skill.

· Good knowledge of industrial automation systems / equipment.

Job Description :

· Incremental improvements/development of software modules

· Analyze customer/production issues and implement solutions within the existing machine application (bug fixing).

· Investigate and implement engineering change requests.

· Testing of new releases by simulating processes and on actual equipment.

· Work with version control tools and issue tracking tool for software release management.

· Creates and maintains engineering documentations relating to software development / bug-fix / feature releases following BESI standards and design rules.

· Ensure fast response to customer and production issues.

· Provides engineering support to assigned R&D/CIT projects.

· Install & (beta) test new software release/fix at customer sites (ability to travel needed)

Requirements :

Education

Bachelor Degree in Electrical or Computer Engineering (Mechatronic) or Software Engineering

Work experience

At least 3 years relevant experience in automation / equipment industries.

Significant practical experience in software engineering and testing (embedded software and HMI environment).

Experience with agile software development processes, quality control and test driven development

Expertise and methodology

Proficiency in Microsoft (C++, VB6) using Microsoft Visual Studio 6.0 and programming language “C” and “C++”.

Knowledge of UML and state machines; State Transition Diagrams

Very good English skills (verbal and written)

Experience with version control in Mercurial / GIT is a pre

Experience with SECS/GEM is a plus

Other requirement criteria

· Good communication skills in a global environment

· Result oriented

· Strong analytical skills

· Team player

· Self-organized, proactive

· Stress resistant

· Affinity with mechatronic systems

· Ability to travel for on-site support (<30%)

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

What you will do:

The Systems Applications Engineer, National Accounts will Provides sales support to the engineering and sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Oversee the application engineering team, providing configuration, enhancement, and support for technical documentation and presentations to clients.
• Customize and introduce new features to Metasys software and in-house developed applications based on end-user requirements.
• Design and construct new applications tailored to meet customer specifications and needs.
• Guide application engineers in writing and executing tests on complex programming, troubleshooting issues as they arise, and supporting product launches.
• Provide technical support and troubleshoot application issues while performing tests on complex programming and assisting in product launches.
• Assist the application manager in process improvements to enhance productivity and efficiency.
• Collaborate with system integrators (SI) to monitor their performance with quality assurance/quality control checks and ensure completion sign-off.
• Manage vendor relationships, including scoping application services and reviewing deliverables.
• Collaborate as part of a design, engineering, and operations team.
• Knowledge of ACMV and controls associated with Johnson Controls Metasys will be advantageous.
• Deliver customer support by responding to technical queries with detailed analyses of building management systems, tooling costs, and design/process improvements to meet all customer needs.
• Collaborate with engineering, sales, and operations teams to understand standard fabrication techniques, composite materials, and customer demands to develop design details.
• Create and present technical engineering information based on customer proposals, including 3D representations of products and tooling.
• Prepare cost estimates by analyzing blueprints, customer documents, and consulting with engineers and technical personnel.
• Conduct conceptual designs of composite components and assemblies to support proposals.
• Generate accurate CAD models of components and assemblies.
• Develop detailed bills of materials for proposals.

What we look for:

• Bachelor's Degree in Engineering with a minimum of 5 years of relevant experience in Access, Intrusion, and Video Management systems
• Demonstrate strong verbal and written communication skills, including the ability to efficiently articulate technical subject matter
• Good communication skills, with an ability to express and understand complex technical concepts.
• Experience of working with globally distributed teams & matrixed environment

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Responsibilities:

• Handles the technical aspects of patch deployment and system updates.
• Ensures that patches are tested, scheduled, and deployed with minimal disruption to system availability.
• Responsible for testing patches in a controlled environment before deploying them to production systems.
• Verify that patches do not introduce new issues or conflicts.
• Regular scanning and analysis.
• Scheduled and controlled patch deployment.
• Perform risk-based prioritization.
• Rigorous testing in a controlled environment.
• Collaborate with customer’s IT team for user acceptance testing.
• Emergency response for critical vulnerabilities.
• Understand the customer’s infrastructure and become familiar with the Customer’s infrastructure environment and support processes and procedures to ensure supporting customer with proper SLAs.
• Troubleshoot production issues to fix any user related issues and work with principal vendors and customer to provide the resolution within the proposed timelines.
• Be available for customers’ questions in assisting their needs to support any issues and monitor customer’s environment leveraging appropriate monitoring tools as well for special scheduled activities performed during non-business hours or public holidays due to system upgrades.

The Individual and their Experience:

• Linux OS patching
• MySQL system and patching knowledge
• MSSQL system and patching knowledge
• Maria DB system and patching knowledge
• Eagerness and willingness to pick up & adapt new skills and automation.

Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernizing key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernization.

Logicalis Group has an annualized revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

Interested applicants please submit your application with your expected salary and notice period to be considered for the role.

We regret that only shortlisted candidates will be notified.

As part of any recruitment process, we collect and processes personal data relating to job applicants. We are committed to being transparent about how we collect and use that data and to meeting our data protection obligations. By applying to this post and sending us your resume, you agree to the collection, use and/or disclosure of your personal data in the manner as set out in our Data Protection Notice for Job Applicants which can be found

Logicalis is committed to protecting your privacy.

Click below to view the data protection notice.

https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf.

Overall Summary:

Mainly supporting security aspect like firewall checkpoint, security appliances - configuration, troubleshooting, capacity planning. Supporting current operation and deployment of resiliency project. This is a 2-year direct contract position.

Roles and Responsibilities:

• Directly reporting to Security Senior Manager
• Assist Architect team on new infrastructure design, implementation, and management of network solutions that form the core infrastructure, ensuring seamless integration across different platforms. This includes procurement of necessary equipment.
• To provide comprehensive product knowledge on the data technology required to deliver, support the networks infrastructure.
• Collaborate with the team to identify network and system needs, monitor performance metrics, troubleshoot, and resolve network-related issues, and implement improvements.
• Deliver project management for network activities encompassing upgrades, deployments, and migrations. Provide technical guidance and user support as required.
• Develop, maintain, and update documentation covering the network environment and operational procedures.
• Generate reports and detailed documentation outlining findings, implemented solutions, and recommendations for further enhancements.
• Oversee network environment to maximize performance, scalability, and minimize downtime.
• Closely coordinate and conform to Change Management policies, process, and procedures on any network changes.
• To implement approved changes, troubleshoot to identify root causes and implement effective solutions.
• Experience on Automating daily network tasks using scripting.
• Be available to provide on-call support as needed.

Qualifications/ Requirements:

• Minimum Bachelor in Computer Engineering or equivalent
• Must equipped with CCNP or CCIE
• Network Infrastructure & Hardware: 5+ years experience managing large enterprise network with a strong focus on F5, Palo Alto, Cisco, and CheckPoint Technology.
• Network Devices: In-depth knowledge and proficiency with switches, firewalls, load balancers, routers, and ISE.
• Network Design & Troubleshooting: Expertise in designing, monitoring, and network & incident management (LAN, WAN, VPN).
• Strong experience with automation tools: Ansible, Python - Automate in operation / project work before
• Experience with Deployment and automation, advantage to have experience building data center
• Proven track record of success in a fast-paced IT environment.
• Excellent communication and interpersonal skills, allowing you to effectively collaborate with both technical and non-technical stakeholders.
• Ability to work under pressure and delivery the project on time with minimum supervision.
• Certified and experienced with the mentioned technologies.

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Responsibilities:

•Check and analyse drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Check and prepare for discrepancies of drawings to be highlighted to consultant

•Oversee the projects and follow the terms and conditions of contracts. Ensure compliance to contracts and the drawings with regulatory specifications

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

Job Requirements:

•Candidate has at least 2 years of relevant working experiences that possess Degree in Construction, Civil Engineering and M&E or equivalent

•Entry level candidates are encouraged to apply ，as training will be provided.

•Knowledgeable in basic Autocad software

•Has positive attitude and sense of responsibilities

•Able to handle construction projects with commitment on work

•Good in communication and written abilities

•Required skill : Able to use Microsoft Project to present schedule to the clients

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

Responsibilities:

· Participate in feature definitions of the leading-edge AI chips

· Lead and participate the microarchitecture design of AI chip SoC and the subsystems

· Lead and participate in the front-end design and the implementation using HDLs

· Perform critical analysis and propose novel chip architectures for performance, power, and area improvement

· Cross-team collaboration with Software, DV, and Physical Design to meet performance, power, and area goals

· Write patents

Qualification:

· Bachelor degree and above in Electrical & Electronic Engineering, Computer Science or equivalent

· Experience in computer architecture, such as AI Accelerator, CPU, network-on-chip, memory hierarchy

· Experience in hardware module development using HDLs

· Experience with Logic Synthesis, Linting, CDC and DFT tools is preferred

· Good understanding of RTL verification flow and environments (e.g., UVM, VIP) is preferred

· Strong learning capability, good communication and collaboration skills

· Mid-senior to senior level positions are available

Responsibilities:

• Liaise and co-ordinate with consultants, clients and subcontractor on Civil, Architectural & M&E works.
• To assist and prepare method statement, drawings, work progress and other relevant documents for M&E related works with project teams.
• Attend regular site meeting with consultants.
• Supervise all M&E related works on site.

Requirements:

• Diploma / Degree in Mechanical / Electrical Engineering.
• 2-3 years experience in Mechanical / Electrical.
• Fresh graduate may apply.
• Experience in engineering softwares and AutoCAD.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Chemical and Biomolecular Engineering, National University of Singapore, is inviting applications for 1 Research Engineer (RE) position under Associate Professor Sibudjing Kawi’s group. The candidate will work on A*STAR LCERFI research project entitled “Methane Pyrolysis for Hydrogen and Carbon Nanotube Production via Novel Catalytic Membrane Reactor System”.

Qualifications

Master degree in chemistry/chemical engineering in the area of catalysts, inorganic membranes and inorganic membrane reactors for high temperature reactions.

• Proven experience (with good research track record in terms of publications and/or patents) in the field of inorganic hollow fiber membrane synthesis, catalyst synthesis/characterization/testing for hydrocarbon pyrolysis and catalytic membrane reactor design.
• Strong team player skills and the ability to work harmoniously with a diverse workforce.

Responsibilities

• Responsible for the quality management of machined products to ensure that product quality
• Ensuring that our internal management systems are well defined and relevant in meeting international standards and customer requirements.
• Lead and monitor the QMS incl. ISO9001 & ISO 14001 quality system certification and promote continuous improvement.
• Lead the quality team to implement quality inspection and control and manage non-conforming products.
• Participate in supplier evaluation and management to ensure the quality of raw materials and purchased parts.

Requirement

• Minimum Bachelor Degree in Mechanical or Industrial Engineering
• At least 3 years of quality management experience in the machining industry
• Proficient in using office software and mintab statistical analysis software, and possessing Six Sigma quality management knowledge and skills, e.g. SPC tools & 8D reports.
• Strong knowledge and experience in leading ISO9001 & ISO 14001 quality system certification.
• Proficiency in English and Chinese, with the ability to communicate effectively with stakeholders in China.

Responsibilities

Operational support and efficiency

• Perform scheduled preventive maintenance (PM) and troubleshoot equipment-related problems to minimize equipment downtime
• Resolve equipment issues and implement corrective and preventive actions
• Always aim to maximize uptime of equipment to sustain equipment performance
• Prepare and execute new equipment start-up by working with cross functional team
• Coordinate with process, integration and manufacturing engineers to ensure work is carried out efficiently to meet module objectives.
• Provide leadership in giving direction and systematic guidance to Equipment Engineer / Technologists/Technicians.

Record and reports

• Review, validate and analyze given reports
• Ensure staff's on-time submission and accuracy on the tool checklist or report

Documentation & Standard Operating Procedures

• Establish and implement all equipment specification, troubleshooting procedures, maintenance procedures, safety related documents and ensure compliance with corporate requirements and procedures
• Documentation of Corrective Action and Best-Known Methods for equipment to allow more efficient troubleshooting
• Lead and work with the supplier and cross function groups on new tool start up with necessary documentation, gantt chart, site preparation, facilities preparation, acceptance preparation, automation preparation and production readiness .

Cost efficiency

• Work with equipment vendors and spare parts suppliers to improve and develop new methods to achieve improvement in maintaining the tools
• Expected to involve actively in yield improvement, cost reduction, 2nd source suppliers and parts sourcing/testing, optimisation of new machine qualification release plan and cycle time reduction projects

Equipment improvement

• Participate in global key equipment exchange to improve and align strategy and plans
• UPkeep, monitor and control equipment performance indices (MTBF, MTTR, UPtime% , Errors Pareto list, WSPC and etc)
• Maintain optimum utilization of equipment and resources and constantly review methods of OEE management to reduce tool downtime and increase equipment throughput
• Develop and implement improvement/safety program of preventive maintenance task of machines
• Lead Technicians to participate in continuous improvement projects

Training and development

• Train/mentor Technicians and Engineers through OJT and continually upgrade their technical skills to cope with technological changes

Quality

• Participate in QIT programs to optimize equipment utilization and cost of maintenance
• Analyze trend, propose areas of quality improvement; Coordinate evaluation and implementation with relevant parties
• Lead or participate in quality related exchange to enhance improvement and preventions

Safety

• Ensure good housekeeping and safety practices in the Fab
• Work with HSE team to establish ,maintain tool and chemical safety related documents

Requirements

• Possess at least a Bachelor’s degree in engineering (Material Science, Chemical Engineering, Electronic/Electrical Engineering, Physis) with min 3 years experience as tool owner
• Preferable hands on experiences with knowledge on

1. Vapor phase decomposition- inductively coupled plasma-mass spectrometry(VPD -ICPMS)
2. Film measurement system
3. Visual and Sorter systems
4. Sem Vision
5. Bagging tool and Box cleaner tools
6. Automation material systems

• Skilled in JMP, Python and driven on root cause analysis techniques to aid on troubleshoot complex problems and provide root-cause fixes to recover/improve the tool and/or process
• A critical thinker team player who loves challenges, thrive on complex issues, multitasker and possess passion for learning
• Have good communication skills and time management discipline.

Degree or diploma in Civil Engineering or project management.

Please email your CV to: [email protected]

Our business:

Professional Engineer (PE Civil)

1. PE endorsement for any temp works

2. PE endorsement for wall hacking, submission to HDB/MCST;

3. Building structure crack/safety assessment

4. Scaffolding/shoring/formwork design

5. ECM design and submission to PUB / QECP inspection to site

6. A&A work design and submission to URA/BCA/HDB/LTA/JTC

7. SCDF submission for shop / factory partition works

8. LTA prompt submission for road opening;

9. PUB POWS submission

10. PUB Form B1 endorsement for sewer connection

11. SCDF FSC02 form endorsement.

12. HDB SED 054M form endorsement.

13. Project management

14. Design for Safety (DfSP) Services

15. Building structural inspection (PSI) to BCA requirements

16. Façade inspection to BCA requirements

17. Earth returning structure design and submission (ERSS)

M & E Work (PE Mechanical)

18. Design and PE endorsement to piping / ducting support

19. Design and PE endorsement to piping trenching excavation work

20. Endorsement to FSC02 form

21. Mechanical PE work

Geotechnical Consultancy

22. Deep Excavation

23. Slope Protection

24. Soil Improvement

25. Foundation Design

26. Soil Interpretation Report

Others

27. Land Survey

28. Pre-con survey

29. Technical clearance to Npark, PUB, LTA, JTC etc.

30. Traffic diversion design, LTA prompt submission

31. Design for Safety Professional (DfSP)

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

As a Senior Frontend (Full Stack) Engineer, you will be responsible for designing, developing, and maintaining our data product suite. You will work closely with cross-functional teams including data scientists, data engineers, and UX/UI developers to create scalable, robust, and user-friendly applications. Your expertise in both front-end and back-end development will be crucial in implementing innovative features and ensuring seamless integration between different components of our data products. This role requires strong problemsolving skills, a deep understanding of data processing and visualization techniques, and a passion for delivering high-quality software solutions.

Responsibilities

• Collaborate with product owner, data scientists, data engineers and designers to understand product requirements and translate them into technical specifications.
• Design and develop full-stack solutions, including user interfaces, APIs, data processing and storage.
• Implement data visualization components using modern front-end frameworks and libraries.
• Develop scalable and efficient back-end services to handle data from multiple data source with complex business logic.
• Optimize application performance and ensure high availability and reliability.
• Conduct code reviews, ensure seamless deployment and testing of the data products and provide constructive feedback.
• Stay updated with the latest industry trends and best practices in full-stack development, data engineering, and data visualization.
• Troubleshoot and resolve issues reported by users, ensuring a smooth user experience.
• Continuously improve software development processes and contribute to the overall technical excellence of the team

• Bachelor's or master's degree in Computer Science, Software Engineering, or a related field.
• 5+ years of professional experience as a Full Stack Engineer, with a focus on datadriven applications.
• Strong proficiency in JavaScript, HTML, CSS, and modern front-end frameworks (e.g., React is preferred as we use React in our team).
• Expertise in server-side programming languages such as Node.js, Python or Java.
• In-depth knowledge of databases and SQL, with experience in designing and optimizing data models.
• Familiarity with data processing frameworks (e.g., Apache Spark) and big data technologies (e.g., Kafka) is a plus.
• Solid understanding of RESTful APIs and microservices architecture.
• Experience with cloud platforms (e.g., Azure, AWS) and containerization technologies (e.g., Docker, Kubernetes).
• Proficiency in version control systems (e.g., Git)
• Excellent problem-solving skills and the ability to debug complex issues in a distributed system.
• Strong communication skills and the ability to work effectively in a collaborative team environment.
• Prior experience working on data products or analytics platforms is highly desirable.

COMPANY DESCRIPTION

As the world's leading owner and operator of LPG carriers with five decades of operating experience, BW LPG promotes competitive, sustainable solutions to secure value for society and our stakeholders.

Our global footprint spans seven countries with 17 nationalities represented across our workforce. Our fleet of 39 Very Large Gas Carriers (VLGC) offer a total carrying capacity of over 3 million CBM. From spot voyages and time charters to Contracts of Affreightments (CoAs), our emphasis on flexible, reliable service has earned the trust of leading oil companies as well as trading and utility companies. More information about BW LPG can be found at www.bwlpg.com.

BW LPG is associated with BW Group, a leading global maritime company involved in shipping, floating infrastructure, deepwater oil & gas production, and new sustainable technologies. Founded in 1955 by Sir YK Pao, BW controls a fleet of over 490 vessels transporting oil, gas and dry commodities, with its 200 LNG and LPG ships constituting the largest gas fleet in the world. In the renewables space, the group has investments in solar, wind, batteries, biofuels and water treatment. BW LPG, as a member of the BW Group, is one of Forbes World's Best Employers 2023.

RESPONSIBILITIES

Summary:

The Senior Data Engineer has a role focusing on building our modern Lakehouse including owning pipeline development, data modeling and governance within a cross-functional team responsible for the end-to-end delivery of data products and analytics solutions.Additionally creating CI/CD pipelines for automated deployments and monitoring, and enforce data quality checks, ensuring data consistency, reliability, and compliance.

Key Responsibilities:

Working with Product Owners, Business Analysts and Data Analysts to ensure business requirements are translated into data solutions, deliver accurate and reliable datasets that enable impactful analytics and dashboards.

They collaborate with System Analysts and the Business to understand the business logic and data lifecycle within our systems and inform our solution design with a goal of balancing scalability and performance.

Skills:

• Collaboration and Communication Skills: Excels at working in a team to align data solutions with business needs, focused on creative problem-solving in a fast-paced environment.
• Analytical Thinking & Communication: Strong skills in analyzing and translating data-driven insights and requirements to both technical and non-technical stakeholders.
• Spark & Azure Databricks: Proficiency in designing and implementing data pipelines to support reliable data ingestion and transformation using Databricks and Spark.
• Data Modeling Expertise: Advanced SQL and Python skills for complex queries and data modeling, enabling efficient data access and transformation.
• CI/CD Pipeline Creation: Experience in creating CI/CD pipelines, enabling automated testing, validation, and deployment of data pipelines models using GitHub and GitHub Actions with Databricks.
• Infrastructure as Code: Experience in automating cloud infrastructure management for consistent deployment and scaling using tools like Terraform.

• 5+ Years in Data Engineering: Proven experience building and maintaining data infrastructure, with a deep understanding of data engineering principles and best practices.
• Agile Mindset and Experience: Thrives in Agile Environments, with a strong resilience, adaptability and responsiveness to change in fast-paced settings.

The position will be based in Singapore.

Only shortlisted candidates will be notified.

Responsibilities

• Responsible for internal and external excursion management (MRB or Quality Claims)
• In-charge of customer data reporting
• Conduct quality related training
• Support customer survey and audits
• Responsible for continuous improvement activities
• Other Adhoc duties assigned

Requirements

• Degree in Engineering or Science
• Min. 2 years relevant working experience is required
• Systematic and analytical problem-solving skills
• Proactive and Multi-tasking
• Good communication skills and a good team player
• Proficient in Microsoft Office
• Good working knowledge in Statistical Process Control (SPC) and Statistical techniques is preferably
• Auditing experience is an added advantage
• Understanding of system flow and database is an added advantage

Job Description

· Collaborate with cross-functional teams such as Mechanical Engineers, Test Engineers, Lab Technicians, and Project Engineers to execute ocean basin model testing projects, such as floating offshore wind projects.

· Analyse and comprehend project requirements related to hydrodynamic testing, model instrumentation, and data acquisition.

· Select and implement suitable data acquisition systems, control system design, and develop software architecture specific to ocean model testing needs.

· Develop and maintain application software for new ocean basin test setups and custom test requirements.

· Upgrade existing software systems to accommodate new test protocols or methodologies for ocean model testing.

· Choose appropriate sensors for wave, current, and motion measurements, ensuring seamless integration with control systems and software.

· Create and update documentation, including software designs, changes, user manuals, and standard operating procedures (SOPs) for ocean model tests.

· Upgrade LabVIEW-based software applications to newer versions, ensuring they meet the latest testing requirements.

· Troubleshoot and resolve issues in control systems, data acquisition, and software during model testing.

· Test and validate application software before deployment to the ocean basin test setup.

· Prepare comprehensive user manuals, SOPs, and provide training for test engineers to ensure smooth operation of the test environment.

Job Requirements

· Minimum qualification: Bachelor of Engineering (BEng) / Bachelor of Technology (BTech) in Electronics, Electrical, Instrumentation, or Computer Science with at least 2 years of relevant experience, particularly in LabVIEW.

· Proficiency in different versions of LabVIEW, including the latest versions with relevant toolkits.

· Experience in designing and developing NI LabVIEW-based data acquisition and control systems for ocean basin model testing or similar environments.

· Proven ability to develop modular and scalable applications using LabVIEW?s standard architecture.

· Experience in developing LabVIEW applications for Windows and Real-Time (RT) Linux environments.

· Proficiency in integrating NI hardware systems such as PXI, cRIO, and CompactDAQ into the testing framework.

· Hands-on experience with communication protocols like TCP/IP, UDP, Serial, USB, CAN, and EtherCAT for testing and control purposes.

· Experience with integrating third-party programmable instruments (e.g., multimeters, power supplies, oscilloscopes) and controllers into ocean testing setups.

· Experience in developing NI software drivers for third-party hardware and integrating third-party software with LabVIEW.

· Knowledge in selecting, wiring, and troubleshooting sensors used in hydrodynamic and ocean model testing (e.g., pressure sensors, accelerometers, flow meters).

· Experience in reading control panel schematics, designing control systems, and selecting appropriate control panel hardware for model testing.

· Strong team player with the ability to work independently and collaborate in cross-functional project teams.

· Experience interfacing induction motors with VFDs and control systems, with knowledge of VFD configuration for use in testing environments.

· Strong troubleshooting skills at the signal and system level for data acquisition and automated test systems.

· Excellent documentation skills for capturing test requirements, preparing software designs, and writing user manuals.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing, Deskside support and Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 2 End User Computing support and well verse in Windows OS.
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment.
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Familiar with Service Desk ticketing systems and process.
• VIP support.
• Change Management, including review new and implemented changes, chair CAB, review change schedule, maintain dashboard, prepare comms.
• Incident Management, including analysing trends, incident workarounds, monitoring aged incidents.
• Major Incident Management, including communication, being part of the Incident Response Team, managing suppliers
• Problem Management, including chairing any problem meetings, managing active problems, highlighting new problems.
• Release Management – liaising with the testers, vendor, tracking features and defects
• Service Request Management – documenting processes, analysing trends, identifying service improvements, working with teams to design new processes
• Continual Service Improvement – being able to highlight areas of improvement for effectiveness and efficiency
• Service Reporting
• ServiceNow – to assist with the day-to-day management of the tool, including working on incidents and requests

Technical Skills & Qualifications Required:

• Good knowledge of ITIL
• Good knowledge of ServiceNow
• Good knowledge/experience of using the Microsoft suite, specifically including SharePoint , Visio and Excel
• Exposure to/familiarity with automation

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences.
• A good team player.
• Excellent verbal and written communication skills, and ability to communicate with different audiences and write a range of document types – procedures, comms, training modules.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Responsibilities

• Internal and external excursion management (MRB / Quality Claims)
• Customer data reporting
• Conduct Quality related training
• Support customer survey and audits
• Continuous improvement activities

Requirements

• Degree in Engineering or Science
• Minimum 2 years relevant experience
• Systematic and analytical problem-solving skills
• Proactive and Multi-tasking
• Good communication skills and a team player
• Auditing experience is a plus
• Good working knowledge in Statistical Process Control (SPC) and Statistical techniques is a plus
• Understanding of system flow and database; basic IT knowledge is a plus

As a Software Engineer (C++ / C#), you will be a critical team member and fully responsible for developing graphics components for our products. In this role, you will work closely with product managers, UI-UX designers and the R&D team to collaboratively solve real-world problems.

What will you do

• Design, build and maintain efficient and reliable software modules for Screening Eagle software products.
• Develop tools for real-time interactive 3D graphics applications.
• Assist other team members to implement next generation NDT solutions.
• Collaborate with team members to integrate the components to desktop, mobile and web platforms end products.

What do we expect

• BA/MA/MS/PhD degree in Computer Science, Computer Graphics, or strong experience in 3D Games / 3D experiences.
• Proficiency in C++11 and above.
• Proficiency in C# and Unity.
• Good understanding of software design patterns.
• Good knowledge of data structures and algorithms for OOP.
• Good understanding of memory management in non-garbage collected environments.
• Familiar with memory and CPU usage optimization.
• Familiar with 3D graphics pipelines and optimization techniques.
• Solid linear algebra knowledge.Experience in developing for and integrating third party software on desktop, mobile and web tech stacks.