ABOUT Defense and Security Engineering Team

Established in Singapore in 1973, Thales Singapore Engineering Team leads and pioneers innovative solutions for the Asia-Pacific region. Our coverage spans across an extensive spectrum of fields, encompassing proven solutions in Defence & Military, Security & Surveillance, Intelligence & Big Data, Secure Radio Communications, to Cybersecurity, Network & Infrastructure Security.

We are at the forefront of cutting-edge technology with a rich legacy in excellence and innovations. With the combined expertise of 2100 staff in Singapore, and over 80,000 professionals across 68 countries, Thales Singapore Engineering Team is the key contributor in keeping Asia-Pacific & the world safe and secure, protecting and changing lives every single step we take.

Along with other departments in Singapore, such as Thales Research & Technology, we engineer state-of-art technological solutions from dreams into reality for the world. If you are ready to make a difference on a global scale, our team is the place for you. Join us today and embark on an extraordinary journey of writing the next chapter of history for a better world.

KEY ACTIVITIES AND RESPONSIBILITIES

As a Software Engineer, you are accountable for:

• Be part of the Security Development team to build innovative Security solutions for Homeland Security, Smart Cities and Critical Infrastructures.
• Be responsible for the technical/solution designs, code development, and component test execution to demonstrate alignment to the product/functional specification of the solution.
• Develop and demonstrate a broad set of technology skills in web application technologies, micro service design patterns, Open Source libraries and frameworks, and technology architecture concepts.
• Collaborate with product/solution architects to create, implement and maintain the product/solution development roadmap.
• Be the main contact point to represent the team, join agile ceremonies and communicate effectively with other development teams and product management team.
• Ensure all work adheres to Thales software development methodologies and processes
• Thoroughly document design to ensure the usability, supportability and maintainability of the developed
• Perform sub-system installation, configuration and integration to support Proof-Of-Concept (POC)/demo.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Experience required:

• 3+ years of hands-on experience of full web application development lifecycle of scalable micro-services-based architectures; including tools, best practices, continuous deployment, dependency/complexity management, scale/performance tuning, monitoring, resiliency, etc.
• Experience in SCRUM/Agile software development methodologies
• Strong knowledge of architectural styles and design patterns is good-to-have

Programming languages/frameworks/Technologies:

• Proficiency in Go Language, various Go frameworks and tools
• Proficiency in building responsive layouts with CSS and HTML5
• Proficiency in building complex Angular applications with Typescript
• Experience with Android (Kotlin)
• Familiar with database technologies such as Postgresql and ClickHouse
• Familiar with MQ and Apache Kafka
• Unit-test code for robustness, including edge cases, usability, and general reliability
• Strong knowledge in version control using GIT
• Maintain the CI/CD pipeline and familiar with Kubernetes. Knowledge about Ansible is good-to-have.
• Knowledge about Mapbox SDK (Android or iOS) is good-to-have.

Behaviour:

• Good communication skills and team-works

Analytical and problem-solving skills

Job Description:

A Singapore based precision optical company is looking for dedicated sales engineer who is fast learner, enthusiastic in sales and customer services

Job Responsibilities:

- Identify and develop new business accounts

- Establish good working relationships with customers and partners

- Follow-up and manage customers enquiries and order shipments

- Recommend suitable products and solutions to the customers

- Provide monthly sales update to the management

- Evaluate new potential products for customer

- Manage with system set up, paperwork, commissioning and ensure that delivered system performance is within specifications

- Attend local or overseas events, conferences and exhibitions

Job Requirements

- Diploma or Degree in Engineering (EEE; Electronic, Mechanics; Biomedical etc.) related discipline

- 2 years of sales experience in optics, laser, spectroscopy, and photonics is preferred.

- Fresh graduates who are keen to explore industrial sales or with engineering background are also welcome to apply

- Be keen on business travelling

- Self-driven and motivated team player

- Good presentation and communication skills with willingness to learn

• Carry out work in accordance to safety procedures.
• Coordinate site resources.
• Designs and drafts construction drawings according to project specifications.
• Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.
• Inspect installations to ensure it adhere to design and equipment specifications.
• Interacting with contractors and customers using verbal and written communication
• Keep proper record of all works carried out on-site.
• Manage a team on-site to ensure works follow regulatory and project’s requirements.
• Supervising or training project team members.
• Estimating material, labor, or construction costs for budget preparation.
• Maintaining electrical equipment.
• Track work progress to ensure project specification and schedules are met.

Job Descriptions

• Reporting to Tunnel Manager
• Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.
• Prepare method statements, safe work procedures, risk registers, tunnel progress reports, and other tunnel-related documentation.
• Provide guidance to supervisors in relation to construction works, ensure progress according to schedule
• Work closely with subcontractors on project progress and ensure timely work arrangements.
• Plan and monitor and track site progress, manpower mobilization, and equipment deployment
• Liaise with consultant and carry out site inspection.
• Maintain quality standards, carry out site inspections and resolve technical issues on time

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Responsibilities:

• Perform software development activities including requirements gathering and analysis, planning, systems design, development and implementation, documentation, testing and deployment.
• Participate and follow in all areas of the software development lifecycle from requirements definition to deployment.
• Document and demonstrate solutions by developing documentation, flowcharts, wireframes, diagrams, charts, UI/UX, code comments and code reviews.
• Recommend and evaluate detailed design of system components/libraries to ensure reusability and flexibility is practiced, where applicable.
• Develop and Implement the software in accordance to the coding standards and design patterns specified in the design document
• Debug, troubleshoot and resolve bugs and complex issues.
• Research and evaluate new software technology stacks for project and product development.
• Report to and work closely with Team Lead / Project Manager for projects deliverables
• Provide operational support, ongoing maintenance and enhancement.

Requirements

• Bachelor’s degree or above with solid programming skills in C# is highly desired.
• Good working knowledge on Microsoft technologies like .Net, .Net Core, Service-Oriented architecture, Entity Framework, nHibernate, ASP.NET, WPF, WCF and MS SQL.
• Familiarity with software design patterns, such as MVC and MVVM.
• Working knowledge on cloud DevOps
• Experience with Python or React would be advantageous.
• A good innovative team player with strong sense of integrity & accountability.
• Great communication skills.
• Must have willingness to learn new technologies.
• Excellent problem solving and analytical thinking skills.
• Fresh graduates are welcome to apply

What we offer:

• An attractive remuneration package will commensurate your experience and qualification.
• Work with a team who are generous in knowledge sharing, friendly, smart, passionate, and funny too.
• Business casual dress throughout the week.
• Professional training opportunities. We believe learning is a lifelong journey. We offer everyone the internal and external training opportunity to grow employee’s technical skills.

An Electrical Engineering background to design Solar PV system, including prepration of Auto CAD drawings,SLD, STR, LPS and other related drwings. Must be independent and able to execute project alone. Must have minimum experience of Solar projects execution. Well versed with Electrical connections, Including Inverter, PVACDB

Key Responsibilities:

• Overseeing projects at one or multiple stipulated sites.
• Assist project manager is the execution of the projects.
• Responsibilites for co-ordination with Consultants, Architects and relevant authorities.
• Liaise with Consultants, Main contractor, Suppliers, Sub contractor on Equipment & Material submissions.
• Monitor and ensure progress of works are carried out according to project specification.
• Design schematic drawing, layout drawing, P&ID drawing.
• Review and check drawing before submit to main contractor.
• Oversee the overall planning of ACMV works, site inspection, variation order and certification of work done for all assigned projects.
• Support project manager in the administration of contract, claim, variation and any dispute arise.
• Raise MR and order material & arrange manpower for necessary works.
• Advise site team for work schedule and technical issues.
• Make sure project is carried out according to schedule.
• Responsible for site supervision and implementation.
• Responsible for ensuring implementing safety measures.

Requirements:
- Minimum diploma
- 3 years or above experiences in ACMV, especially in air-conditioning industry
- Able to use AutoCAD or other related software for ACMV Design
- Able to communicate Fluent in English
- Minimum 3 years in ACMV Sector

Job Title: Architectural Engineer

Occupation: Architectural Engineer

Duties and Responsibility:

→LTA A&A Experience (Must)

→Minimum 5 years relevant experience in supervision of architectural works in building construction

→Handle technical and engineering problems

→Plan and execute work schedule based on contract schedule

→Coordinate and control construction works on site

→Evaluate subcontractors’ risk assessment, safe work procedures and method statements

→Review subcontractors/supplier performance after completion works

→Well-versed in Construction Method Statements

→Manage Piling, Excavation, ERSS, RC, and Architecture work

→Preparing the site and liaising with other construction professionals before construction work starts

→Developing the program of work and strategy for making the project happen

→Planning ahead to prevent problems on site before they occur, planning the delivery and storage of equipment and materials

→Making safety inspections of the site when work is underway and ensuring regulations relating to health, safety, and the environment are adhered to

→Ensure progress of work is within budget & timelines as well as quality & safety objectives

→Well-versed in construction sequence, principles and LTA regulatory requirements

→Good leadership skills

→Good communication and interpersonal skills

→Great team player

Responsibilities

• Communicate and reconcile quality / technical matters to various stakeholders.
• Investigate supplier non-conformance, drive root cause analysis, discuss corrective actions and implement process improvement, including source inspection.
• Work with suppliers to ensure their manufacturing processes comply with customers’ expectations.
• Monitor non-conformance performance and collaborate with suppliers to drive continuous improvement in supplier’s quality.
• Maintain and improve product quality by completing product and compliance audits.
• Prepare and review monthly data to analyse quality issues.
• Process engineering changes (ECN).
• Maintain customer’s claims system.
• Maintain calibration process for Shimadzu’s equipment.
• Ad-hoc duties as assigned.

Requirements

• Diploma or degree in supply chain management, engineering or science.
• At least three years of experience in quality engineering or related role.
• Having experiences in mechanical engineering or related field will be advantageous.
• Possess good communication skills and able to articulate ideas succinctly to local and international stakeholders.
• Possess a good analytical mind, positive attitude and patience under challenging situations.
• Having a tenacious desire to solve challenging technical problems will be a distinct advantage.
• Possess a good organizational skill and a strong penchant for neatness.
• Possess a high level of proficiency in Microsoft Office and Microsoft 365.
• Able to work independently and a good team player.
• Possession of a Class 3 driving licence is preferred.

We regret that only shortlisted candidates will be contacted.

- To monitor and supervise work progression according to shop drawings, method statements, material and samples.

- To liaise and work with relevant authorities on shop drawings, materials and samples.

- Review and align Fire protection design drawings to ensure compliance with design specifications and guidelines.

- Knowledge in M&E and able to Identify discrepancies between M&E, structural, ID, architectural and client provisions.

- Manage and execute project as per the schedule.

- To attend meeting with contractors to address issues and update progress.

- Study and reviewing of drawings, specifications for compliance.

- Allocate work to supervisors and ensure jobs are correctly and properly achieved within standards and SOP.

- Plan and lead testing and commissioning of the fire protection systems.

- Liaise with regulatory bodies, fire departments, and other stakeholders to ensure compliance with relevant codes and regulations.

- Follow up with site / authority inspections, defects rectifications of the fire protection works.

- Plan and prepare OMM, training, As-Builts drawings for handing over of completed fire protection systems to client.

- Follow up with maintenance of fire protection systems during DLP.

- Ensure that all project documentation is accurate, complete, and up-to-date.

Job Requirements

-To assist the Project Manager on overall site works related to Fire Protection and this shall be in line with safety requirements.

- Hands-on and technical assistance for fire protection systems services, programming, testing and commission for the projects.

- Design and engineering of fire protection system.

- Supervision of work, liaise with sub-contractors, site supervisors, foremen and workers regarding the overall fire protection system.

- Attending to all site meetings with owner, consultants on all matters relating to the project operation and co-ordination

Requirements:

- Min 3 years similar capacity experience in fire protection Industry

- Knowledge of AutoCAD added Advantage

Job Description:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• Become the technical Expert for the respective machine specialization.
• Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Se expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Bachelor Degree in Electrical / Electronics / Chemical / Mechanical /Microelctronics Engineering
• Min 5 years of relevant work experience in Photo Equipment (Track) in semiconductor industry
• Excellent communication, interpersonal and leadership skills
• Strong analytical skill and able to work under pressure in fast pace environment
• Proficient with MS Power Point, Excel, Excel VBA, Power BI

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in Etch tools / equipment (AMAT / Mattson)
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

COMPANY

At Peptobiotics we have built a new biotechnology product to replace the billions of dollars of antibiotics currently used in agriculture - enabling a productive, sustainable food system free from disease, and helping prevent the superbug crisis. We use genetically modified microbes to produce novel antimicrobial peptides. Our strain and bioprocess teams work together designing our product around straightforward scale-up and profitable unit economics.

OBJECTIVES

• Operation of bioreactor systems for submerged fermentation, downstream processing and sample analysis.
• Liaise with Chinese contract manufacturers for production at ~80kL scale and assist them in troubleshooting when required.
• Drive process optimisation by overseeing rigorous data collection, recording, and analysis. Use effect size analysis, DoE, etc to accelerate yield improvements and scale up.
• Preparation of SOPs for fermentation and downstream processing.
• Work with other team members to align molecular, bioproduction and veterinary research.
• Training and mentorship of junior team members.

REQUIREMENTS

ATTRIBUTES

• Experience with benchtop microbial bioreactor systems.
• Experience with yeast secreted protein production fermentation optimization preferred.
• PhD or Masters with work experience.
• Ideally has some experience or familiarity with downstream processing and analytical methods.
• Ideally has some experience or familiarity with industrial-scale fermentation.
• English and Chinese language working fluency are both required.
• Good communicator that enjoys working with and supporting others.
• Driven and takes initiative.
• Interested in entrepreneurship, biomanufacturing, synthetic biology, sustainability/agriculture,aquaculture, technology commercialisation and science with real world impact.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible for ensuring quality control in semiconductor manufacturing processes, managing engineering changes, resolving production issues, and driving continuous improvement.

Key Responsibilities :

• Develop, implement, and maintain quality control measures for semiconductor manufacturing processes.
• Monitor production data to identify trends and initiate corrective actions to improve yield and reliability.
• Review and validate quality systems and specifications for new equipment and processes.
• Ensure smooth integration of new technologies into the production line with a focus on maintaining quality standards.
• Manage quality control for engineering changes in wafer fabrication, including reviewing change requests, conducting risk assessments, and ensuring compliance with quality standards.
• Oversee the quality of incoming masks through inspections and audits.
• Collaborate with mask suppliers to identify quality issues, implement corrective actions, and drive continuous improvement initiatives.
• Lead the response to major abnormal events in the wafer fab, including root cause analysis and corrective actions.
• Manage RMAs and work with customer quality teams to resolve issues and improve customer satisfaction.

Education Qualification & Essential Experiences:

• Education: Bachelor's degree or higher in Electronics, Physics, Materials Science, or other related engineering fields.
• At least 5 years of relevant work experience.

Personal Attributes:

• May need to travel to Taiwan for a training period lasting 6 to 9 months.
• Excellent coordination and communication skills, with the ability to work independently and manage multiple tasks effectively in a fast-paced environment.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Job Responsibilities:

• Handling MEMS modules development related project independently.
• Host regular PRS review meeting with project owners of TD integration and Fab module engineers.
• Provide robust recipe to TD PI for new process developing
• Co work with fab module engineers to provide solutions for projects
• Provide risk assessments for new developing projects.
• Continuous improvement

Job Requirements:

• Bachelor degree in any Engineering discipline
• At least 3 years' experience from Etch/Diffusion/Thin Film/Photo process engineer
• Integration experience is a plus
• Capable of using DPE, 7 QC tools, FMEA, SPC, 3L5W, 8D

(a) Responsibilities:

The candidate is responsible for the end-to-end testing activities of an integrated e-payment system. The primary responsibilities would include carrying out the activities in the testing lifecycle including the test

planning, and analyzing business and system requirements.

The candidate will also be responsible for:

• Preparing the test environment, designing, and developing the test cases.

• Preparing the test environment, and executing the test procedures.

• Automating the test solution based on the system design using scripting or programming languages as well as performance tuning.

• Create traceability to requirements, analyze gaps and address them.

• Logging and tracking defects to closure

• Conducting test reviews with internal and external stakeholders.

• Perform root cause analysis for production and user acceptance defects, and address test gaps to ensure test efficiency.

• Develop design documents and user manuals that would effectively describe and provide clear instructions on the test automation solution to the end users including testers and stakeholders.

(b) Qualifications & Requirements:

• Tertiary qualification in Information Technology or Engineering

• At least 3 years’ relevant experience in executing testing and

developing test automation solutions involving devices (UI-based

or embedded) and/or back-office systems with familiarity on the full

system development lifecycle from requirement, development, to

testing and deployment;

• Good written and verbal communication skills;

• Able to work well both independently as well as in a team;

• Certification in software testing preferred;

• Experience in micropayments Fare Collection systems using Smart Cards and in diverse test execution phases (System Integration Testing, User Acceptance Testing, Performance testing) would be an advantage;

Point of contact with customer

Coordination with sub con and suppliers

Proficient in paper work preparation for each project

Familiar with Safety requirements and regulations

Develop project schedule, track timeline

Good disposition, able to handle stress

Resourceful and creative

Responsive and fast

Speak and write good english

Experience in CCTV, Access Control is advantage

• Bachelor’s degree in civil engineering or related field, accredited by the Institution of Civil Engineers.
• A minimum of 5 years of industry knowledge may be strongly desired.
• Familiarity with design software, such as Autodesk, AutoCAD Civil 3D, and MicroStation.
• Knowledge of map creation software and photo imaging software.
• Strong analytical and critical thinking skills, with a high level of accuracy in calculations and design.
• Excellent time management skills to ensure project deadlines are met.
• Leadership skills to effectively manage a diverse group of professionals working on one project.
• Ability to coordinate more than one project at a time.
• RES or REO is the added advandage.

Job Description:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Mfg can have more flexibility.
• Perform process matching between equipments to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Mfg Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide coaching, guidance, feedback and training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics
• Min 3 years of relevant work experience in Etch Process or BEOL
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Location: Tampines

I- Basic Function/General Scope of Work

The position takes overall responsibility of project management for all aspects (contract, commercial and technical) of the projects assigned. The position works closely with Project Manager so as to complete and achieve the projects’ objectives/ metrics as planned.

II- Key Duties & Responsibilities

1. Conducts site inspection, collects the data and transfers the information to design team to prepare drawings.

2. Verifies all drawings from design team prior to moving to construction phase.

3. Deals with customer requires related to drawings and requirements.

4. Coordinates with design team, customers and sub contractors during construction.

5. Checks and inspects the quality of work carried out by workers of subcontractors.

6. Assists and follows the assignments of project manager in ensuring that the projects are implemented on time, safety and in accordance with the customer requirements

7. Be responsible for testing and commissioning all equipment with subcontractors after installation.

8. Be responsible for customer training after project completed.

9. Be responsible for final inspection and collection the data for as built drawings.

10. The position is accountable for implementing assigned responsibilities and activities to attain project goals and objectives.

11. The position is accountable for strictly complying with Chubb’s Code of Ethics.

12. The position is accountable for implementing assigned responsibilities and activities to attain EH&S goals and objectives and complying with EH&S policies, applicable rules, procedures, and regulations.

III- Qualifications & Compentencies

The incumbent should possess:-

1- a degree in Engineering is required/preferred.

2- a minimum 3 years of Project Management knowledge, skills, experience.

3- Knowledge and experience in any kind of engineering management, problem solving, strong systematic and analytical thinking skills, strong knowledge of commercial terms and conditions, working within an ISO 9000 quality environment, strong coaching, influential and negotiation skills.

4- Good English communications and computer competencies.

5- Adaptability, Analytical Thinking, Teamwork, Communications, Listening and Ethics.

6- Experience in LTA projects is preferred.

Compensation & Benefits

• Annual Increment
• Performance Incentive Bonus
• Career Progression

For quick reply, please contact me at +65 85878287

Registration Number: R21100938

EA Licence No: 22C1301 (Unisearch Services Pte Ltd)

Job responsibility:

• Setup, commissioning and decommissioning of equipment
• Troubleshoot and resolve technical issues with semiconductor equipment
• Perform preventive maintenance on equipment
• Conduct training for customers’ engineers
• Provide technical support to maintain high level of customer satisfaction

Requirements:

• Diploma in Electrical / Electronics / Mechanical Engineering
• Excellent analytical skills with the ability to trouble-shoot and resolve technical issue
• Able to read electrical and mechanical diagrams
• Responsible, Positive Attitude and able to work independently with minimum supervision
• Prior experience working in semiconductor industry would be an added advantage
• Fresh Polytechnic Diploma holder are welcome to apply

able to work comfortably and independently in construction site environment .

coordinate , meeting with consultant and maincon . plan and liaise with site drafter to prepare

required drawing .

able to read and understand construction drawing . assist project manger in site work .

upadte BQ and monitor inventories movement .

understand security and cctv system and equipment . have no bad record and need clearance from MHA .

submit drawing and attend RTO inspection .

Responsibilities of Process Engineer

· Process Technology development for Silicon wafer manufacturing

· Manage wafer manufacturing process in achieving quality, yield, quality and production targets.

· Collaborate with Technology counterparts globally on process alignment and qualification of new processes, suppliers and consumables if needed

· Work with cross-functional teams on process capability improvement and yield enhancement projects

· Coordinate troubleshooting of process issues and yield losses

· Drive for continuous process improvement and permanent solutions to resolve chronic process and quality issues.

· Develop best practices, routines and innovative solutions for continuous improvement

· Perform Statistical data analysis for process improvement and interpretation of data

· Apply problem solving methods (8D, Fishbone, DOE etc.) and risk analysis (like FMEA)

Requirements of Process Engineer

· University degree in Engineering or Science

· Min. 3 years relevant semicon/ manufacturing experience

· Knowledge of quality management systems, data analysis, Design of Experiments (DOE) and statistical process control (SPC)

· Proficient in statistical software like JMP, visual basic, database and queries will be an added advantage

· Self-motivated and able to work well in a team

· Good analytical and communication skills

· Willingness and curiosity to learn attitude

Job Description & Requirements:

• Review of Civil & Structural working drawings and shop drawings in connection with SEM and steel structure shop drawings during pre-construction phase to prepare construction methods, identifying risks to promote strategies and alternative methodologies to mitigate.
• Organizing regular meetings with the sub-contractor's technical teams to resolve technical problems in pre-construction and construction phase.
• Working closely with Design team and LTA/QPS (client) to resolve execution issues with appropriate functional proposals with an aid of presentation or sketches.
• Preparing method statement for construction working including RA and SWP.
• Prepare of RFI for site inspection for construction, MPI test, welding works and post concrete works and also involving in site inspection with QP.
• Reviewing of rebar BBS prepared by sub-con in compliance with standards and shop drawings roof slabs, steel structures and corbel details for precast installation.
• Site Supervision of construction of structures such as pile cap, undergrounds tanks, base slab, column (~12m high) including corbel, RC beams, Capping beam, RC and PC beam connections, ramps, steel and RC struts, hanging sumps and staircases.
• Reviewing and site supervision of surface water drain and waterproofing shop drawings and site work.
• Assisting construction manager for planning and preparing daily progress reports
• Tracking and optimizing manpower for each works
• Preparation of conceptual drawings for steel decking or other temporary structures required on site and reviewing shop drawing submitted by sub-con and supervising site installation.
• Reviewing concept drawings and supervising installation of bracing connections between permanent plunge-in-columns for top down column construction.
• Reviewing sub-con's shop drawing for steel strut and supervision of installation work.