Job Description:

1. Oversees projects management and implementation;
2. Codify implementation design into documented for end user's record;
3. Conduct training and presentation for team members and end-users;
4. Provide technical testing or support to pre-sales engineer/customer on the network setup;
5. Assist on technical communications with customer/partner, to ensure closure of sales order;
6. Ensuring that the solution can deliver on the customer’s requirements;
7. Work closely with Level 2 support, if case issue is escalated to Level 3;
8. Maintain rapport with customers and competence in managing vendors; and
9. Any other ad-hoc duties assigned.

Job Requirement:

• Degree/Diploma in IT Networking or equivalent
• At least 2 years of work experience in a SI or distributor environment with network security skillset
• Good IT knowledge in OSI 7 Layer, TCP/IP, LAN/WAN technologies and network security
• Ability to work under pressure with minimal supervision
• Excellent in communication and analytical skill
• Experience in network security projects implementation
• Positive working attitude and a good team player
• Willing to work extended office hours and after office hours when needed
• Exposure to security solution such as Firewall, local balancer or endpoint protection will be an added advantage

Your duties as Site Engineer as follows:

• setting out, leveling, and surveying the site;
• checking plans, drawings, and quantities for accuracy of calculations;
• ensuring all materials used and work performed are as per specifications;
• overseeing the selection and requisition of materials and plant;
• making cost-effective solutions and proposals for the intended project;
• liaising with any consultants, subcontractors, supervisors, planners, quantity surveyors, and the general workforce involved in the project;
• liaising with the local authority to ensure compliance with local construction regulations and by-laws;
• liaising with clients and their representatives (architects, engineers, and surveyors), including attending regular meetings to keep them informed of progress;
• day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors;
• planning the work and efficiently organising the plant and site facilities in order to meet deadlines;
• overseeing quality control, health, and safety matters on-site;
• preparing reports as required;
• Resolving any unexpected technical difficulties, and other problems that may arise.
• Calculate costs relating to building and civil engineering projects, from the initial calculations to the final figures.
• Involved in a project from the start, preparing estimates and costs of the work.
• preparing tender and contract documents, including bills of quantities with the architect and/or the client;
• allocating work to subcontractors;
• providing advice on contractual claims;
• maintaining awareness of the different building contracts in current use;
• Understanding the implications of health and safety regulations.

1. Trouble-shooting, repairing & maintenance for

ship automation

2. Degree / diploma in electrical automation or

equivalent

3. Min. 3 years relevant site experience in a ship

automation engineering

4. Independent, strong technical competence, can

do overtime if necessary

5. Class 3 driving license and navigation

equipment experience preferred

6. Only Singaporean or Singapore PR

7. Can start work immediately

• Assist the Project Manager in overseeing the construction activities and progress, planning, implementation, and monitoring of work schedules.
• Liaise with both internal and external parties and ensure efficient communication.
• Ensuring that the works are carried out to schedule and in accordance with relevant regulations
• Other ad-hoc duties as assigned

Job Description
• Involve in the project or maintenance services related with General Security Systems, Alarms
Systems, CCTV Systems , Access control systems and Server & Network infrastructure and whenever required.
• Perform Installation, Implementation, Configuration and testing of system/storage equipment & setup
• Troubleshoot problems encountered on site
• Perform OS hardening, patching and updating on servers/VM
• Develop implementation plan, migration plan and acceptance test plan for the project.
• Conduct acceptance test with users and address the testing findings/issues
• Work closely with Project/Maintenance Managers in planning the implementation tasks
• Maintain accurate and consistent set of work instructions service delivery processes.
• Develop As-built documentation for handover

Job Requirements
• Candidate must possess at least a Professional Certificate/Nitec, Diploma,
Advanced/Higher/Graduate Diploma, Engineering (Electrical/Electronic/Information
Technology ) or equivalent
• Minimum 2 years’ experience in Operational Technology/Information Technology industry
• Knowledge of networking and IP/TCP protocol
• In-depth knowledge in CCTV, Access Control and System Server etc.
• Hands-on experience in security-related tasks such as OS tightening, patching and updating,
virus scanning will be an added advantage.
• IT Certification in windows system & storage, network, database, virtualization, cloud
technologies will be an added advantage
• Good communication skills and positive working attitude.
• Candidate must possess a Class 3 driving license
• Fresh graduates welcome to apply

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible for ensuring wafer products meet quality standards by developing shipment procedures, improving processes, resolving anomalies, and overseeing staff training.

Key Responsibilities :

• Develop and maintain wafer product shipment standards and procedures to ensure alignment with customer quality requirements.
• Improve the quality of wafer product shipments by identifying areas for enhancement and implementing corrective and preventive actions.
• Analyse and address quality control inspection anomalies, promptly resolving customer complaints.
• Conduct process analysis and lead continuous improvement initiatives for semiconductor products to elevate overall product quality.
• Oversee training and certification programs for quality control personnel to ensure strict adherence to quality standards and procedures.

Education Qualification & Essential Experiences:

• Bachelor's degree or higher in Electronics, Materials, Chemical Engineering, or other related engineering or science disciplines
• At least 1 years of relevant work experience.

Personal Attributes:

• May need to travel to Taiwan for a training period lasting 6 to 9 months.
• Excellent coordination and communication skills, with the ability to work independently and manage multiple tasks effectively in a fast-paced environment.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible to ensure the reliability and stability of semiconductor processes and achieve it through advanced testing, analysis, and collaboration with both internal teams and external clients.

Key Responsibilities:

• Develop and implement reliability assessment systems for semiconductor processes, including TDDB, HCI, BTI, PID, EM, and SM.
• Design and conduct reliability tests to evaluate process performance and durability, analyse test data, and provide recommendations for process technology improvements.
• Provide expert technical support to clients by diagnosing reliability issues, addressing their concerns, and delivering solutions to improve process performance.
• Assist the manufacturing team in managing abnormal events by conducting reliability risk assessments and suggesting improvements to mitigate risks.

Education Qualification & Essential Experiences:

• Bachelor’s degree or higher in Electronics, Electrical Engineering, Physics, or a related technical field.
• Minimum of three years of relevant experience in semiconductor process reliability engineering.
• Strong problem-solving skills and a detail-oriented approach with the ability to analyse complex data and derive insights.

Personal Attributes:

• Excellent coordination and communication skills, with the ability to work independently and manage multiple tasks effectively in a fast-paced environment.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.es.

Job requirement:

• Ability to perform first level investigation out of control situation and line excursions, abnormal lot/tool judgement due to inline OOC and OOS from SPC Chart.
• Process condition optimization.
• Work closely with equipment and production to ensure key module objectives are met.
• Evaluation to improve process margin.
• Cost reduction projects.
• Ensure safety, discipline and housekeeping compliance by all personnel.
• Analyze different types of defects and provide clear problem description with maintenance counterparts on troubleshooting.

Job requirement:

• Diploma in Electrical/Electronics/Chemistry/Microelectronics/Engineering or equivalent.
• Relevant working experience in Photo Process semiconductor front-end industry
• Willing to work in cleanroom environment.
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Objective:

Provide 24x7 support for all Diffusion Wet Equipment Tools and Issues

Job Description:

• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness..
• Able to coach junior engineers in performing hardware trouble-shooting for daily operations
• Establish Preventive Maintenance (PM) plans for all implant equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Initiate meeting with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives and analyze low yield and WAT issues
• Establish stock levels of essential spare parts and consumables to support equipment maintenance based on forecasted manufacturing volume. Liaise with vendors to minimize / eliminate over-stock or under-stock
• Manage new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production
• Develop continuous improvement and Implement equipment improvement projects to improve equipment efficiency, cost reduction and reliability of equipment
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Set targets, goals, and projects for the section to minimize wafer scrap, equipment cost per wafer, optimize equipment capability and utilization to meet operational needs
• Provide feedback / training to AEs and TAs on their troubleshooting skills, equipment knowledge, decision making, risks assessment
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers
• Self audit and update specifications to meet TS16949 Quality Standard requirements
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager. Help the AE or Engineer on their career path development
• Provide long term solutions to address daily issues. Resolve department hardware chronicle issues.
• Create and maintain implant operation SOP and PM OI
• Develop continuous improvement to enhance equipment reliability and cost of ownership, Able to plan implant cost budget

Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Min 3 years of relevant work experience as Engineer in Diffusion Wet Equipment
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Key Responsibilities:

• Provide remote and on-site technical support, including but not limited to, Incident Management and Problem Management

• Escalate incidents, problems, changes to Team Lead, Service Delivery Manager, Account Manager or vendors as per defined business rules, ensuring timely resolution of client service requests

• Liaise with vendors needed to achieve incident and problem resolution.

• Maintain detailed knowledge of clients’ environments, where applicable, by maintaining and updating relevant documentation.

• Provide high levels of customer service and resolving problems/issues with the client in a constructive manner.

• Prepare adhoc reports as required for contractual requirements.

• Contribute to ITIL based processes to ensure successful delivery of services and initiate solutions to improve quality and productivity

• Participate in client presentations when necessary

Job Requirements:

• CCNP or CCIE in Enterprise is required

• Hands-on experience in installation, configuration and troubleshooting of Cisco routers, wireless or switches

• Have some working knowledge of Cisco Routers, Switches, SD-WAN, DNA, Wireless products in addition to Meraki Switch, Router, Wireless products

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines

• At least 3 years of experience in a technical support environment working with Cisco products

• Experience with VMWare NSX and VMWare Load balancers, is an added advantage

• Knowledge of Aruba, Bluecoat, Ironport, F5, Checkpoint, Fortigate or Juniper products is also preferred

• Able to work in a 24x7 and team environment

Asst Project Engineer

• To assist the Senior Project Engineer/Project Manager to conduct kick-off, pre-project/project meetings to ensure team members is clear on the objectives, deliverable, Quality, equipment’s Lead-time, Safety and construction requirements.
• Plan and assist the Senior Engineer to monitor the daily progress of activities to achieve on or before schedule, i.e., by comparing the planned vs actual progress status, identify critical activities.
• Preparation of engineering documents, such as inspection form, testing form and progress reports, updating of completion status.
• Together with the project team prepare the statement/work procedures, RA to specify the detailed work step required for the specific task of the job to be done and identify key risk with the associate risk. A risk mitigation strategy is applied with the whole project construction task.
• Calculate and tracking usage of resources, such as materials and tools with report prognosis to the Senior Project Engineer/Project Manager.
• Understand and evaluate the project requirements and project plans particularly, materials, schedule, equipment and labour loading.
• Assist the Senior Engineer/construction superintendent in assigning tasks to work teams.
• To explain the site situation, technical requirements, project specifications, special engineering requirements, coordination procedures, execution approach and activities priorities to the various work teams to seek contributions for further refinement.
• Ensure that various disciplines (including quality and safety personnel) are carrying out each tasks and tests/inspection in accordance with specification and standards as per the contractual requirements.
• Assist in resolving engineering issues at site, coordinating with the respective engineering support units, if necessary report discrepancy (if any) on labour status, equipment, materials etc. to the Senior Project Engineer/Project Manager.
• Preparation of project close-out report for the Senior Project Engineer/Project Manager to review before submission to clients.
• Ensure final acceptance of the project by client in accordance with contractual requirements

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]

Overall Summary:

Mainly supporting security aspect like firewall checkpoint, security appliances - configuration, troubleshooting, capacity planning. Supporting current operation and deployment of resiliency project. This is a 2-year direct contract position.

Roles and Responsibilities:

• Directly reporting to Security Senior Manager
• Assist Architect team on new infrastructure design, implementation, and management of network solutions that form the core infrastructure, ensuring seamless integration across different platforms. This includes procurement of necessary equipment.
• To provide comprehensive product knowledge on the data technology required to deliver, support the networks infrastructure.
• Collaborate with the team to identify network and system needs, monitor performance metrics, troubleshoot, and resolve network-related issues, and implement improvements.
• Deliver project management for network activities encompassing upgrades, deployments, and migrations. Provide technical guidance and user support as required.
• Develop, maintain, and update documentation covering the network environment and operational procedures.
• Generate reports and detailed documentation outlining findings, implemented solutions, and recommendations for further enhancements.
• Oversee network environment to maximize performance, scalability, and minimize downtime.
• Closely coordinate and conform to Change Management policies, process, and procedures on any network changes.
• To implement approved changes, troubleshoot to identify root causes and implement effective solutions.
• Experience on Automating daily network tasks using scripting.
• Be available to provide on-call support as needed.

Qualifications/ Requirements:

• Minimum Bachelor in Computer Engineering or equivalent
• Must equipped with CCNP or CCIE
• Network Infrastructure & Hardware: 5+ years experience managing large enterprise network with a strong focus on F5, Palo Alto, Cisco, and CheckPoint Technology.
• Network Devices: In-depth knowledge and proficiency with switches, firewalls, load balancers, routers, and ISE.
• Network Design & Troubleshooting: Expertise in designing, monitoring, and network & incident management (LAN, WAN, VPN).
• Strong experience with automation tools: Ansible, Python - Automate in operation / project work before
• Experience with Deployment and automation, advantage to have experience building data center
• Proven track record of success in a fast-paced IT environment.
• Excellent communication and interpersonal skills, allowing you to effectively collaborate with both technical and non-technical stakeholders.
• Ability to work under pressure and delivery the project on time with minimum supervision.
• Certified and experienced with the mentioned technologies.

What you will do:

The Systems Applications Engineer, National Accounts will Provides sales support to the engineering and sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Oversee the application engineering team, providing configuration, enhancement, and support for technical documentation and presentations to clients.
• Customize and introduce new features to Metasys software and in-house developed applications based on end-user requirements.
• Design and construct new applications tailored to meet customer specifications and needs.
• Guide application engineers in writing and executing tests on complex programming, troubleshooting issues as they arise, and supporting product launches.
• Provide technical support and troubleshoot application issues while performing tests on complex programming and assisting in product launches.
• Assist the application manager in process improvements to enhance productivity and efficiency.
• Collaborate with system integrators (SI) to monitor their performance with quality assurance/quality control checks and ensure completion sign-off.
• Manage vendor relationships, including scoping application services and reviewing deliverables.
• Collaborate as part of a design, engineering, and operations team.
• Knowledge of ACMV and controls associated with Johnson Controls Metasys will be advantageous.
• Deliver customer support by responding to technical queries with detailed analyses of building management systems, tooling costs, and design/process improvements to meet all customer needs.
• Collaborate with engineering, sales, and operations teams to understand standard fabrication techniques, composite materials, and customer demands to develop design details.
• Create and present technical engineering information based on customer proposals, including 3D representations of products and tooling.
• Prepare cost estimates by analyzing blueprints, customer documents, and consulting with engineers and technical personnel.
• Conduct conceptual designs of composite components and assemblies to support proposals.
• Generate accurate CAD models of components and assemblies.
• Develop detailed bills of materials for proposals.

What we look for:

• Bachelor's Degree in Engineering with a minimum of 5 years of relevant experience in Access, Intrusion, and Video Management systems
• Demonstrate strong verbal and written communication skills, including the ability to efficiently articulate technical subject matter
• Good communication skills, with an ability to express and understand complex technical concepts.
• Experience of working with globally distributed teams & matrixed environment

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

Responsibilities:

• Handles the technical aspects of patch deployment and system updates.
• Ensures that patches are tested, scheduled, and deployed with minimal disruption to system availability.
• Responsible for testing patches in a controlled environment before deploying them to production systems.
• Verify that patches do not introduce new issues or conflicts.
• Regular scanning and analysis.
• Scheduled and controlled patch deployment.
• Perform risk-based prioritization.
• Rigorous testing in a controlled environment.
• Collaborate with customer’s IT team for user acceptance testing.
• Emergency response for critical vulnerabilities.
• Understand the customer’s infrastructure and become familiar with the Customer’s infrastructure environment and support processes and procedures to ensure supporting customer with proper SLAs.
• Troubleshoot production issues to fix any user related issues and work with principal vendors and customer to provide the resolution within the proposed timelines.
• Be available for customers’ questions in assisting their needs to support any issues and monitor customer’s environment leveraging appropriate monitoring tools as well for special scheduled activities performed during non-business hours or public holidays due to system upgrades.

The Individual and their Experience:

• Linux OS patching
• MySQL system and patching knowledge
• MSSQL system and patching knowledge
• Maria DB system and patching knowledge
• Eagerness and willingness to pick up & adapt new skills and automation.

Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernizing key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernization.

Logicalis Group has an annualized revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

Interested applicants please submit your application with your expected salary and notice period to be considered for the role.

We regret that only shortlisted candidates will be notified.

As part of any recruitment process, we collect and processes personal data relating to job applicants. We are committed to being transparent about how we collect and use that data and to meeting our data protection obligations. By applying to this post and sending us your resume, you agree to the collection, use and/or disclosure of your personal data in the manner as set out in our Data Protection Notice for Job Applicants which can be found

Logicalis is committed to protecting your privacy.

Click below to view the data protection notice.

https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf.

Job Responsibilities:

1. Develop and release warranty claims policies for service providers.
2. Review and settle service provider claims.
3. Provide training and support for service providers on claims processes.
4. Inspect and supervise the disposal of service provider claim parts.

Recruitment Requirements:

1. Minimum Bachelor in any field.
2. At least 3 years of warranty admin experience in automotive industry.
3. Strong communication skills, preferred proficiency in English and Mandarin to liaise with HQ colleague.

Responsibilities:

· Participate in feature definitions of the leading-edge AI chips

· Lead and participate the microarchitecture design of AI chip SoC and the subsystems

· Lead and participate in the front-end design and the implementation using HDLs

· Perform critical analysis and propose novel chip architectures for performance, power, and area improvement

· Cross-team collaboration with Software, DV, and Physical Design to meet performance, power, and area goals

· Write patents

Qualification:

· Bachelor degree and above in Electrical & Electronic Engineering, Computer Science or equivalent

· Experience in computer architecture, such as AI Accelerator, CPU, network-on-chip, memory hierarchy

· Experience in hardware module development using HDLs

· Experience with Logic Synthesis, Linting, CDC and DFT tools is preferred

· Good understanding of RTL verification flow and environments (e.g., UVM, VIP) is preferred

· Strong learning capability, good communication and collaboration skills

· Mid-senior to senior level positions are available

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Chemical and Biomolecular Engineering, National University of Singapore, is inviting applications for 1 Research Engineer (RE) position under Associate Professor Sibudjing Kawi’s group. The candidate will work on A*STAR LCERFI research project entitled “Methane Pyrolysis for Hydrogen and Carbon Nanotube Production via Novel Catalytic Membrane Reactor System”.

Qualifications

Master degree in chemistry/chemical engineering in the area of catalysts, inorganic membranes and inorganic membrane reactors for high temperature reactions.

• Proven experience (with good research track record in terms of publications and/or patents) in the field of inorganic hollow fiber membrane synthesis, catalyst synthesis/characterization/testing for hydrocarbon pyrolysis and catalytic membrane reactor design.
• Strong team player skills and the ability to work harmoniously with a diverse workforce.

Responsibilities:

• Liaise and co-ordinate with consultants, clients and subcontractor on Civil, Architectural & M&E works.
• To assist and prepare method statement, drawings, work progress and other relevant documents for M&E related works with project teams.
• Attend regular site meeting with consultants.
• Supervise all M&E related works on site.

Requirements:

• Diploma / Degree in Mechanical / Electrical Engineering.
• 2-3 years experience in Mechanical / Electrical.
• Fresh graduate may apply.
• Experience in engineering softwares and AutoCAD.

Responsibilities

• Responsible for the quality management of machined products to ensure that product quality
• Ensuring that our internal management systems are well defined and relevant in meeting international standards and customer requirements.
• Lead and monitor the QMS incl. ISO9001 & ISO 14001 quality system certification and promote continuous improvement.
• Lead the quality team to implement quality inspection and control and manage non-conforming products.
• Participate in supplier evaluation and management to ensure the quality of raw materials and purchased parts.

Requirement

• Minimum Bachelor Degree in Mechanical or Industrial Engineering
• At least 3 years of quality management experience in the machining industry
• Proficient in using office software and mintab statistical analysis software, and possessing Six Sigma quality management knowledge and skills, e.g. SPC tools & 8D reports.
• Strong knowledge and experience in leading ISO9001 & ISO 14001 quality system certification.
• Proficiency in English and Chinese, with the ability to communicate effectively with stakeholders in China.

Responsibilities

Operational support and efficiency

• Perform scheduled preventive maintenance (PM) and troubleshoot equipment-related problems to minimize equipment downtime
• Resolve equipment issues and implement corrective and preventive actions
• Always aim to maximize uptime of equipment to sustain equipment performance
• Prepare and execute new equipment start-up by working with cross functional team
• Coordinate with process, integration and manufacturing engineers to ensure work is carried out efficiently to meet module objectives.
• Provide leadership in giving direction and systematic guidance to Equipment Engineer / Technologists/Technicians.

Record and reports

• Review, validate and analyze given reports
• Ensure staff's on-time submission and accuracy on the tool checklist or report

Documentation & Standard Operating Procedures

• Establish and implement all equipment specification, troubleshooting procedures, maintenance procedures, safety related documents and ensure compliance with corporate requirements and procedures
• Documentation of Corrective Action and Best-Known Methods for equipment to allow more efficient troubleshooting
• Lead and work with the supplier and cross function groups on new tool start up with necessary documentation, gantt chart, site preparation, facilities preparation, acceptance preparation, automation preparation and production readiness .

Cost efficiency

• Work with equipment vendors and spare parts suppliers to improve and develop new methods to achieve improvement in maintaining the tools
• Expected to involve actively in yield improvement, cost reduction, 2nd source suppliers and parts sourcing/testing, optimisation of new machine qualification release plan and cycle time reduction projects

Equipment improvement

• Participate in global key equipment exchange to improve and align strategy and plans
• UPkeep, monitor and control equipment performance indices (MTBF, MTTR, UPtime% , Errors Pareto list, WSPC and etc)
• Maintain optimum utilization of equipment and resources and constantly review methods of OEE management to reduce tool downtime and increase equipment throughput
• Develop and implement improvement/safety program of preventive maintenance task of machines
• Lead Technicians to participate in continuous improvement projects

Training and development

• Train/mentor Technicians and Engineers through OJT and continually upgrade their technical skills to cope with technological changes

Quality

• Participate in QIT programs to optimize equipment utilization and cost of maintenance
• Analyze trend, propose areas of quality improvement; Coordinate evaluation and implementation with relevant parties
• Lead or participate in quality related exchange to enhance improvement and preventions

Safety

• Ensure good housekeeping and safety practices in the Fab
• Work with HSE team to establish ,maintain tool and chemical safety related documents

Requirements

• Possess at least a Bachelor’s degree in engineering (Material Science, Chemical Engineering, Electronic/Electrical Engineering, Physis) with min 3 years experience as tool owner
• Preferable hands on experiences with knowledge on

1. Vapor phase decomposition- inductively coupled plasma-mass spectrometry(VPD -ICPMS)
2. Film measurement system
3. Visual and Sorter systems
4. Sem Vision
5. Bagging tool and Box cleaner tools
6. Automation material systems

• Skilled in JMP, Python and driven on root cause analysis techniques to aid on troubleshoot complex problems and provide root-cause fixes to recover/improve the tool and/or process
• A critical thinker team player who loves challenges, thrive on complex issues, multitasker and possess passion for learning
• Have good communication skills and time management discipline.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are seeking a Research Engineer to join our research team to work on related Soft Robotics.

Key Responsibilities:
To design, build and test whole hybrid robot systems for specific scenarios.

Qualifications

• Possess a bachelor’s degree in biomedical engineering or related field.
• Have relevant experience with hybrid robot system development and evaluation.
• Have good knowledge of soft robot actuator/sensor/integration fabrication.
• Good written and spoken communication skills and the ability to collaborate effectively in a team environment.
• Open to fixed-term contract.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are seeking a Research Engineer to join our research team to work on related Soft Robotics.

Key Responsibilities:

To design, build and test whole hybrid robot systems for specific scenarios.

Qualifications

• Possess a bachelor’s degree in biomedical engineering or related field.
• Have relevant experience with hybrid robot system development and evaluation.
• Have good knowledge of soft robot actuator/sensor/integration fabrication.
• Good written and spoken communication skills and the ability to collaborate effectively in a team environment.
• Open to fixed-term contract.

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Responsibilities:

•Check and analyse drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Check and prepare for discrepancies of drawings to be highlighted to consultant

•Oversee the projects and follow the terms and conditions of contracts. Ensure compliance to contracts and the drawings with regulatory specifications

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

Job Requirements:

•Candidate has at least 2 years of relevant working experiences that possess Degree in Construction, Civil Engineering and M&E or equivalent

•Entry level candidates are encouraged to apply ，as training will be provided.

•Knowledgeable in basic Autocad software

•Has positive attitude and sense of responsibilities

•Able to handle construction projects with commitment on work

•Good in communication and written abilities

•Required skill : Able to use Microsoft Project to present schedule to the clients

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239