Key Responsibilities:

• Develop hardware for switched-mode power supplies and battery chargers.
• Perform topology selection, circuit design, component selection, and power loss calculations based on customer specifications.
• Design schematic and PCB layout based on product design.
• Craft test and verification plan to ensure product design can comply with customer requirements.
• Ensure the product can meet safety and certification requirements.
• Resolve issues with design promptly based on customer and internal feedback.
• Liaise with multiple parties – customer, factory, and internal/external stakeholders to ensure successful delivery of the product.
• Good communication skills to ensure effective collaboration within a diverse team.
• All experience levels are welcome – job grade and salary will be commensurate with relevant experience.

Requirements:

• BSc, MSc, PhD, or researcher with Min. 3 years experience.
• Knowledge of power electronics topologies and design – flyback, boost PFC, LLC, PSFB.
• Experience designing CC/CV charger systems and working on power supplies with power levels >500W.
• Working experience in schematic design and PCB layout software, e.g. OrCAD, PADS, or other equivalent software
• Familiar with simulation tools, e.g. LTspice, PSIM, or other equivalent software
• Acquainted with test equipment such as AC/DC source, electronic load, oscilloscope, and soldering iron.
• Candidates with the below skillsets will be an added advantage.

1. Experience in volume manufacturing.
2. Experience in the automotive industry.
3. Ability to converse in Mandarin to liaise with HQ.

Key Responsibilities:

• Develop hardware for switched-mode power supplies and battery chargers.
• Perform topology selection, circuit design, component selection, and power loss calculations based on customer specifications.
• Design schematic and PCB layout based on product design.
• Craft test and verification plan to ensure product design can comply with customer requirements.
• Ensure the product can meet safety and certification requirements.
• Resolve issues with design promptly based on customer and internal feedback.
• Liaise with multiple parties – customer, factory, and internal/external stakeholders to ensure successful delivery of the product.
• Good communication skills to ensure effective collaboration within a diverse team.
• All experience levels are welcome – job grade and salary will be commensurate with relevant experience.

Requirements:

• BSc, MSc, or PhD with Min. 5 years’ experience.
• Knowledge of power electronics topologies and design – flyback, boost PFC, LLC, PSFB.
• Experience designing CC/CV charger systems and working on power supplies with power levels >500W.
• Working experience in schematic design and PCB layout software, e.g. OrCAD, PADS, or other equivalent software
• Familiar with simulation tools, e.g. LTspice, PSIM, or other equivalent software
• Acquainted with test equipment such as AC/DC source, electronic load, oscilloscope, and soldering iron.
• Candidates with the below skillsets will be an added advantage.

1. Experience in volume manufacturing.
2. Experience in the automotive industry.
3. Ability to converse in Mandarin to liaise with HQ.

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, resourceful, meticulous and professional individual.
• Lead in plan, sourcing and initiate - raise purchase requests accordingly to day-to-day materials / spare parts requirements to ensure stock adequacies, required to ensure smooth Fab operations.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time (include coordination of shipments etc. with forwarders when required etc.)
• Provide good supports on logistics and inventory movements required to enable smooth FAB cleanroom operations.
• Excellent interpersonal skills and communication skills so to work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.
• Self-starter with strong ability to work with own initiative under minimal supervision.
• Process strong sense of customer service mind-set and teamwork.
• Strong flexibility and ability to handle multiple requests from across teams.
• Good communication, analytical, problem-solving skills.
• Put-up good initiatives to move forward towards systematic inventory digitalization.
• Ability to work in a multi-task environment and perform other duties assigned by Department Managers.

Experience:

• Education: Diploma in engineering discipline. Preferably in procurement, supply chain logistic/ warehouse operation.
• At least 3 years of related semiconductor engineering experiences; with good wide contacts with semiconductor material suppliers, equipment vendors.
• Relevant experience in analytics or strategic reporting will be an advantage.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

• Position : Senior Project Engineer (Building & Construction/Civil Engineering) - Up to $7,500
• Location : Resorts World Sentosa
• Working hours : Monday to Saturday | 8am to 5pm
• Salary (commensurate with experience) : Up to $7,500 + Performance Bonus + Transport Allowance + 14 Days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Engineering & Construction

Main Responsibilities:

• Monitor and manage the day-to-day operations of project
• Create project plans, schedules and budgets
• Liaise with Subcontractors, Surveyors and Site Supervisors/Foremen to make sure that works are carried out in time and smoothly on site
• Attend regular meetings with Owner/Client/Contractors/Subcontractors on the project related matters
• Carry out site inspection and ensure that the works are executed to the required quality standards

Requirements:

• Degree in Civil Engineering or equivalent with minimum 4 - 5 years of working experience in Building & Construction Industry.
• A team player with positive working attitude
• Bilingual in English and Mandarin to communicate with Chinese clients who can only speak mandarin.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Key Responsibilities:

• Partner with multidisciplinary teams to craft, build, and launch top-tier software applications, spanning mobile and web interfaces, as well as corresponding backend systems.
• Advocate for and implement industry-leading software development methodologies, including collaborative coding, peer review, and test-driven development.
• Spearhead technical forums, design system architectures, and coach team members to cultivate expertise and excellence.

Requirements:

• A minimum of 5 years of experience as a full-stack developer, with a demonstrated history of delivering high-performance, scalable solutions.
• In-depth knowledge of modern web development frameworks, including ReactJS, NextJS, TypeScript, and Kotlin/Java.
• Skilled in designing, implementing, and managing continuous integration and delivery pipelines, with expertise in deploying applications on cloud-based platforms such as AWS.
• Familiarity with database migration tools and techniques is a plus.
• Experience working in Agile/Scrum environments is also desirable.
• Excellent verbal and written communication skills, with the ability to clearly articulate complex technical concepts.
• A self-driven and proactive individual with a strong passion for innovation and continuous improvement.

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R21102607

Business Registration Number: 201735941W

Licence Number: 18S9037

http://www.dadaconsultants.com/

—------------

EA License number : 20S0283

EA Personnel : R1332294

Job Title: Production Engineer / Executive (ID3469)
Location: Jalan Buroh
Working Hours: Mon - Fri 7:30am -5pm
Salary： $3500-$4000

JOB RESPONSIBILITIES
• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with HR Department and assure that employee grievances are addressed in a timely fashion.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.
• Maintain and ensure work safety and practices. Also continually improve safety record by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas.
• Evaluate, Train and Maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Ensure on time submission of overtime record to HR Dept for computation of monthly salary.
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

REQUIREMENTS
• Minimum 5 years working experience in manufacturing environment.
• Able to supervise and lead the subordinates.
• Able to work under pressure.
• Computer literate.
• Knowledge in ISO is an advantage.

Summary:

• Construction industry
• Junior role up to $3800
• Senior role up to $5000
• Performance bonus on a yearly basis
• Location: AMK / YCK / Central
• 5 days work week
• Experienced in ACMV & LTA / SMRT

Key Responsibilities:

• Perform engineering design, calculations, planning, and tender preparation / evaluations
• QA/QC documentation of engineering deliverables (DTS,MSS,RFI)
• Liaise with clients, project managers, architects, contractors about the projects
• Assist in resolving any technical problems faced during project design and / or construction stages
• Any other required duties as required by the Project Team

Key Requirements:

• At least 3 years experience in relevant field
• Must have ACMV, LTA / SMRT experience

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Title: Project Engineer (ID5034)
Location: Ubi
Working Hours: Mon to Fri 8.30am – 6pm
Salary: $3000 to $4000


Job Description:

The role and responsibilities include, but are not limited to,
• To manage projects, monitor progress and ensure smooth completion.
• To coordinate the works of a multi-disciplinary workforce including consultants, external subcontractors and etc.
• To handle project risk management and issues escalation.
• To ensure safe work procedures and environmental control measures are implemented at work site.
• To provide project status update to management accurately and in a timely manner.
• To attend to maintenance issues during DLP.
• To assists in products specification and datasheet.
• Any other ad hoc duties assigned by Manager.



Requirement:

• Min Diploma holder in Electrical / Electronic / Mechanical Engineering
• At least 3 years’ experience as Project Engineer
• Motivated to work in challenging, fast paced and result-driven environment
• Good communication and interpersonal skills
• Knowledge of lighting an advantage
• Knowledge of software an advantage, eg. Autocad, Photoshop, Dialux

Summary:

• Basic up to $6000 (Senior), $5000 (Junior)
• Performance bonus
• Location: AMK / YCK / Central
• 5 days work week
• Familiar with ACMV
• Career advancement & stability

Key Responsibilities:

• Manage and lead the electrical team
• Perform engineering duties: design, engineering calculations, planning, tender and etc
• Perform testing and commissioning of ACMV electrical system
• QA/QC
• Resolve any technical issue during any stage of the project
• Liaise with clients, project manager, contractor and etc
• Ensure the team follows all electrical codes and standards
• Other relevant ad-hoc duties

Key Requirements:

• Min 5 years of relevant experience in Construction Electrical field, including testing and commission
• Familiar with ACMV

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Product area

Google's network provides services to millions of Internet users around the world. Our metros are on the edge of our network where Google connects to its users. The Network Team is responsible for operating that network reliably and at scale. Our team owns the full life cycle of all space, power, and network assets in all of Google’s data centers and metro points of presence globally. From the foundation, we are involved from site acquisition to construction and are accountable for what space and power is delivered. We're involved in every facet of network delivery from architecture and design to installation, configuration, activation, and commissioning.

Job description

As a Network Implementation Engineer, you will be the initial point of our efforts to execute deployment, maintenance, and operations of private data networks worldwide. You will work with Technical Program Managers, Network Engineers, Design and Infrastructure Engineers, Field Engineers within Google, as well as construction and telecommunications vendors and contractors, all to position your team and organization for success.

You will facilitate faster, better, and more efficient, positive outcomes for the business and our customers. Your objective will be to build the world’s most reliable, cost-effective and scalable network to support all of our current and future customers and users globally.

Qualifications

Job responsibilities

• Manage oversight and Quality Assurance (QA) of installation technicians for rack, stack and installation of networking equipment.
• Test and commission routers, optical transport equipment, and other network devices in new and existing network nodes across Google's global network.
• Generate implementation plans and provide technical leadership and guidance during deployment activities.
• Work with project management, network engineering, and rest of the Engineering team to identify in advance potential issues in network installations, including in the areas of facility power Alternating Current/Direct Current. (AC/DC), cooling, security/access, rack layout, and cable management.
• Own network documentation, updating, and maintaining network drawings and plans.

Minimum qualifications

• Bachelor's degree in Network Engineering or Telecom Engineering, a related technical field, or equivalent practical experience.
• 3 years of experience in Dense Wavelength Division Multiplexing (DWDM) or Transmission Control Protocol/Internet Protocol (TCP/IP) or system design operations methodology.

Preferred qualifications

• Experience working with field operation technicians, engineers, contractors, or vendors in a telecommunications environment.
• Experience in collaborating across multiple levels and functions.
• Experience in directing field operation technicians, engineers, contractors or vendors in a telecommunications working environment.
• Ability to engage/influence tactical decision-making.

Project Overview

We are seeking a Research Engineer to systematically organize knowledge for a project on “Designing human-AI teams.” The project is part of a five-year research program on "Mens, Manus and Machina—How AI Empowers People, Institutions and Cities in Singapore (M3S)."

Successful applicants for this position will have the opportunity to work on a cutting-edge, interdisciplinary project that aims to dramatically rethink how people and AI systems will work together in the future. To do this, the project seeks to build a strong scientific foundation for how AI can augment (as opposed to replace) humans.

An important goal of the project is to develop a rich ontology of activities that can be performed by human-AI teams. Like categorizing the plants and animals on a little-explored continent, the work will involve cataloging many (a) activities and (b) possible human-computer processes for performing these activities.

To do this, we will develop knowledge graphs that include (1) descriptions of many different types of activities and processes, and (2) classifications of these descriptions into multi-dimensional taxonomies that range from very general types of activities to very specific ones.

These knowledge graphs will then be used to automatically generate promising ways of combining humans and AI systems to perform different tasks. In the long run, we believe these tools will help rapidly (a) identify use cases for new AI capabilities, (b) specify effective processes and task allocations to humans and computers in a given situation, and (c) identify innovative ways to combine people and AI to solve business and societal problems.\

The T6 team is led by distinguished scholars, including Profs. Thomas Malone, Charles Fine, Armando Solar-Lezama, Jinhua Zhao, and Abdullah Almaatouq from MIT; Prof. Marcelo Ang from the National University of Singapore; and will be assisted by Prof. Archan Misra from Singapore Management University.

Responsibilities

• Developing descriptions of current or potential activities and processes based on various sources such as: interviews, field studies, literature reviews, and generative AI systems (such as ChatGPT).
• Making editorial decisions about what content from these sources to include in the knowledge graphs and how to present and organize this knowledge clearly.
• Collaborate with the project team and other researchers to design, implement, and evaluate research projects.
• Perform other duties as needed.

Requirements

- Bachelor’s or Master’s degree.

- Excellent communication and collaboration skills.

-Ability to systematically organize knowledge in structured ways that are logical, comprehensive, understandable, and conceptually elegant.

-Skilled in software development, good writing ability, statistical analysis, and social science methodologies such as experimental design or ethnographic observation.

To apply, please visit our website at: https://portal.smart.mit.edu/careers/career-opportunities

Interested applicants are invited to send in their full CV/resume, cover letter and list of three references (to include reference names and contact information). We regret that only shortlisted candidates will be notified.

Salary: $3,400 - $3,800

Location: Ang Mo Kio/Yio Chu Kang

Key Responsibilities:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects and contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Key Requirement:

• Graduate in Electrical/Mechanical Engineering.
• Advanced skills using company software
• 3 - 5 years experienced
• Experienced in ACMV & LTA/SMRT
• Soft skills including a positive attitude, flexibility and conflict resolution

WhatsApp me wa.me/6585125305 for a prompt response to your enquiry!

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please by notified that only shortlisted candidates will be informed.

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

WHO YOU’LL WORK WITH

Apparel and Accessories Costing Team is a function of Apparel and Accessories Supply Chain, driving costing model that is transparent, fair and fully digital across apparel and accessories. The team provides predictability, scalability and benchmarking of Nike manufacturing costs that improves end to end margin planning, cost mitigation and sourcing decisions. This role reports to Director, Apparel/Acc Costing, N Asia based in Shanghai

WHO WE ARE LOOKING FOR

The ideal candidate should have relevant experience and knowledge in Apparel/Accessories industrial engineering, costing, product construction, or production management. Good in product complexity analysis, workflow study and data management skills. Have good communication in technical manufacturing concepts with other stakeholders. A self-starter with ability to work independently and meet deadlines. Willing to learn and with “can-do” attitude. And below qualifications:

• Diploma or above. Minimum of 2-year work experience
• Certificate of General Sewing Data (GSD) and relevant knowledge in SAM (Standard Allowed Minute) /SMV (Standard Minute Value) analysis.
• Able to communicate in verbal and written English. Mandarin is a plus.
• Computer skills: Microsoft Excel, Word, PowerPoint, and Outlook.

WHAT YOU’LL WORK ON

As a Cost Engineer, this role will work closely with ACE managers and directors in optimizing the cost models in Nike, creating SAM/SMV database, managing the product cost analysis from manufacturing perspective, and driving cost improvement with best practice sharing. She/He will closely collaborate with both Nike internal and external stakeholders including factory partners to understand, collect and analyze the cost-related information, and then align the standard and processes.

Core Responsibilities include:

• Product Cost Engineering Analysis

1. Assist the Director/IE (Industrial Engineer) managers to design and enhance the product cost review tools (e.g. Product Standard Minutes - SAM/SMV database, Cost Matrices & Calculators) for quick and accurate product cost assessment.
2. Analyze the product cost based on style constructions, factory cost structure and other related cost factors e.g. Manufacturing efficiency during product development.
3. Liaise with Factory Partners (mostly their costing or IE teams) in case of critical gap (e.g. in SAM/SMV or other related production process) vs their quotation. Support the product development to resolve the costing challenges from product perspective.

• Update Nike cost model

1. Collect, review and analyze manufacturing information from factories or market research (machines, workflow, output/efficiency…) for setting the reasonable and sustainable cost models.
2. Track and report cost drivers (e.g. SAM/SMV, Efficiency/Productivity) Study the impact and drive the review with the key functions including factory partners, Manufacturing Engineering team and Product creation team.

• Improve factory cost performance

1. Collect and analyze production data. Report the factory performance through scoring Manufacturing Index or other measurements.
2. Study and share the best practice to improve the cost performance of factories. Regularly review and update any related cost benchmarks.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• Design and synthesis of organic functional materials with persistent luminescence
• Design and synthesis of organic functional materials for theranostic applications
• Design and synthesis of nanomaterials for theranostic applications
• Cellular and bacteria studies to evaluate fluorescent probes
• Responsible for conducting high quality research, writing academic papers and collaboration with other researchers

Job Requirements

• Bachelor degree in Chemistry, Materials, Polymers and Chemical Engineering.
• Good knowledge in synthesis and characterization.
• Have good publication record and relevant research experience.
• Highly motivated and independent, strong problem-solving skills
• Good written and spoken communication
• Open to fixed-term contract

Summary:

• Quality control engineer (manufacturing company)
• Basic salary up to $4500
• Performance bonus
• 5 days work week @ 8.30 am - 6.00pm
• Location: Serangoon

Key Responsibilities:

• Implement procedures to ensure consistent product quality during the manufacaturing process
• Work with process engineer & engineering team on QC requirements
• Regularly inspecting the materials, components and finished products
• Proper record of the inspection and test results
• Work with QA, process and product team on corrective action with quality issues
• Assist with in-process audit and FQC audit
• Other relevant ad hoc duties

Key Requirements:

• Min Diploma in manufacturing / quality engineering
• Min 1 year of relevant experience in electronics products / manufacturing environment
• Knowledge of ISO 9001, 14001, 13485, 45001, FDA requirement

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Key Responsibilities:

• Work along with the development teams to onboard the Project onto AWS Platform
• Guiding the continuous integration, continuous deployment, continuous testing & continuous monitoring
• Work closely with the development team and operation team to ensure project delivery and maintain compliance standards.
• Set up, deploy, and maintain scalable, high-availability systems.
• Perform and automate provisioning and security hardening of systems.
• Set up and maintain CI/CD, automated testing, development, and delivery environments.
• Writing scripts/programs for service monitoring and health checks of systems
• Day-to-day monitoring, backup, deployment, and maintenance of systems

Requirements:

• Bachelor's or Master’s Degree in information engineering, information management or computer science
• Minimum 3 years in the software development industry or server infrastructure setup
• At least 1-year of experience working closely with infrastructure, Experience in Linux, Windows
• Network troubleshooting is a plus.
• Good hands-on experience in using AWS Cloud
• Experience with IAC / config management tools (Terraform, Ansible, Puppet etc.)
• Good understanding of hardware infrastructure systems (network switches, firewalls, router etc.) and Linux operating system
• Good understanding of DevOps Principles and practices
• Experience with cloud orchestration, configuration management and auto-scaling techniques
• Experience on building and developing CI/CD pipeline and workflow.
• Cloud & DevOps Certifications e.g., AWS Solution Architect, DevOps is a plus.

• Position : Project Engineer (A&A Construction/Junior Role) - Up to $6,500 + Bonus
• Office Location : East - Aljunied
• Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm
• Salary (commensurate with experience) : Up to $6,500 + Variable Bonus + Annual Leaves + Medical Benefits + Travel Reimbursable
• Duration : Permanent
• Industry : Construction Sector - A&A / Building Works

Main Responsibilities:

• Manage the transmission of documents and drawings to the client and subcontractor to ensure the updated drawings are issued.
• Prepare method of statement and work procedure
• Conduct weekly or monthly meeting with sub-contractors to update progress of work
• Ensure quality of work is achieved and all government and safety regulation are complied
• Oversee drawing management and control of technical documentation
• Manage procurement of resources, monitor and control material usage on site to avoid unnecessary wastage or wrongly usage.
• Assist the Project Manager or Senior Project Engineer in co-ordination with consultants on change order issued and liaise closing with the Quantity surveyor by providing necessary supporting documents on the change order
• Any other duties assigned

Requirements:

• Minimum of Degree in Architectural/ Building / Construction Management or related; with at least 3-5 years of experience with A&A works preferably.
• Great team player with pro-active attitude.
• Bilingual in English and Mandarin to liaise with Mandarin speaking associates

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• Position : Senior Project Engineer (Building & Construction/Civil Engineering) - Up to $7,500
• Location : Resorts World Sentosa
• Working hours : Monday to Saturday | 8am to 5pm
• Salary (commensurate with experience) : Up to $7,500 + Performance Bonus + Transport Allowance + 14 Days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Engineering & Construction

Main Responsibilities:

• Monitor and manage the day-to-day operations of project
• Create project plans, schedules and budgets
• Liaise with Subcontractors, Surveyors and Site Supervisors/Foremen to make sure that works are carried out in time and smoothly on site
• Attend regular meetings with Owner/Client/Contractors/Subcontractors on the project related matters
• Carry out site inspection and ensure that the works are executed to the required quality standards

Requirements:

• Degree in Civil Engineering or equivalent with minimum 4 - 5 years of working experience in Building & Construction Industry.
• A team player with positive working attitude
• Bilingual in English and Mandarin to communicate with Chinese clients who can only speak mandarin.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• Position : Technical Sales Engineer (NO EXP REQUIRED/TRAINING PROVIDED) - Up to $4500
• Location : West – Bukit Batok Crescent
• Working hours: Monday to Friday | 8.30am to 5.30pm
• Salary (commensurate with experience) : Up to Basic of $4,500 + Average Incentives of $1,000 + AWS + Variable Bonus + Transport Reimbursement/Allowance + Mobile Phone Allowance + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Industrial Automation

Main Responsibilities:

• Responsible for preparing quotations, proposal according to customer’s requirements
• Plan sales visits, customer calls
• Service existing clients and proactively identify and develop new customers and markets
• Conduct product training and presentation to customers
• Follow up on sales lead, sales orders and deliveries
• Provide application/product support to customers and internal sales team
• Provide post sale and presale application and sales support by analysing and recommending solutions to meet customer’s needs.
• Using technical skills to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products..

Requirements:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic/Mechanical
• No experience required/ Entry level candidates are welcome to apply
• Training on products will be provided
• Bilingual in English and Mandarin to communicate with colleagues who can only speak in mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS.
• Change Management, including review new and implemented changes, chair CAB, review change schedule, maintain dashboard, prepare comms.
• Incident Management, including analysing trends, incident workarounds, monitoring aged incidents.
• Major Incident Management, including communication, being part of the Incident Repsonse Team, managing suppliers
• Problem Management, including chairing any problem meetings, managing active problems, highlighting new problems.
• Release Management – liaising with the testers, vendor, tracking features and defects
• Service Request Management – documenting processes, analysing trends, identifying service improvements, working with teams to design new processes
• Continual Service Improvement – being able to highlight areas of improvement for effectiveness and efficiency
• Service Reporting
• ServiceNow – to assist with the day-to-day management of the tool, including working on incidents and requests

Technical Skills & Qualifications Required:

• Good knowledge of ITIL
• Good knowledge of ServiceNow
• Good knowledge/experience of using the Microsoft suite, specifically including SharePoint , Visio and Excel
• Exposure to/familiarity with automation

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 3-5 years of relevant working experiences.
• A good team player.
• Excellent interpersonal skills.
• Excellent verbal and written communication skills, and ability to communicate with different audiences and write a range of document types – procedures, comms, training modules.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Sound problem solving and investigative skills.
• Desire to follow best practice and development standards as agreed within IT.
• Keen to learn new skills.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Key Responsibilities

• Take charge of facility MEP package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor EPC contractors or design consultants’ design progress.
• On-site management MEP package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Mechanical Engineering or related field.
• 300mm fab facility mechanical system operating experience, especially Exhaust / Chiller / PCW & Clean Room Systems.
• Good written and verbal communication skills in English.
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

• Marine Civil Engineering
• Basic $4000 + $5000
• 5.5 days (8am-5pm/12pm)
• Office: Bukit Batok
• Working location: Project based

Responsibilities:

• Oversee daily vessel operations, including movements, documentation, and compliance.
• Manage ship and cargo documents, procurement, and maintenance requests.
• Submit monthly reports and assist with claims like demurrage and cargo shortages.
• Improve ship efficiency and oversee sea staff deployment.
• Maintain records and planned maintenance documentation.

Requirements:

• Diploma / Bachelor’s degree in Marine & Offshore Engineering, Mechanical Engineering, or a related field.
• Knowledge of international maritime regulations and environmental standards.
• Minimum 1 years hands-on experience with vessel operations, maintenance, or technical troubleshooting.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R1873990 | Lucky Lee Ding Cong

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• Fabrication of 2D materials based memristors using mask aligner, electron beam evaporator and shadow masks
• Characterization of 2D materials based memristors using a semi-automatic probe station, semiconductor parameter analyser.
• Characterization at the materials level using SEM, TEM, FIB, XPS, and Raman Spectroscopy.
• Other routinal paperwork related to the correct functioning of the group, including purchases, contract preparation and reimbursements.

Qualifications

• PhD in Materials Science and Engineering plus 3 years postdoc in memrsitors.
• Proficiency in using all the above mentioned machines
• Publications in top journals
• Fluent in English and Chinese language (including read/write) as the candidate is also expected to support applications for funding in collaboration with China (for example, with the NUS - Suzhou Research Institute).

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Integration diverse team of talent. You will be responsible to manage integration of all modules’ processes and the respective derivatives.

What you working on:

• To provide a leading role in the developing, transferring and maintaining of advanced CMOS fabrication technology with good process capability and high yield.
• Lead new technology transfer from mother fab or process development.
• Owner of new tapeout prototype lots and ensure 100% success rate.
• Drive process robustness improvement by providing root cause analysis and and collaborate improvement actions to meet 100% wafer acceptance test (WAT) Cpk goal & Baseline D0 target.
• Drive process excursion control by providing root cause analysis to modules and collaborate improvement actions to meet wafer acceptance test out of control % / out of specification % (WAT OOC%, OOS%) goal and single wafer low yield (SWLY) and single lot low yield (SLLY) goal.
• Collaborate with product engineer on product sensitivity related low yield and plan to do product specific process tuning to meet baseline D0 target
• Work with Customer Engineering to resolve customer complaints and provide customers with required information to meet customer concern and satisfaction & customer caution index (CCS & CCI) goal.
• Adhere to all FAB change management, safety & ISMS procedures
• Continuous improvement in d0, WAT performance, new tape-out (NTO) success and people efficiency.
• Ensure safety awareness
• Lead sub-team in x-functional continuous improvement projects.

More about you:

• Degree in Electrical/Electronics/Microelectronics/Material Science/Materials Engineering/Physics Engineering
• At least 2 years of relevant PI/Yield Engineering working experience in semiconductor manufacturing environment
• Strong understanding of device physics, advanced semiconductor process and SPC
• Strong analytical and problem solving skills to lead 8D team for corrective and performance actions
• Proficient in Microsoft business applications
• Proficiency in PROMIS system, Klarity ACE & DataPower will be an added advantage

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.