Job Title: Sputter Process Engineer (ID1603)
Location: Pioneer, transport pick up Singapore and JB Bukit Indah
Working Hours: 4334 days 12 hours shift
Night Shift: 8:00pm – 8:15am
Salary: $2800 - $3600
Benefit: 12 days Annual Leave, AWS and Variable Bonus


Job Description
• Ensure the sputtering machine is tuned to operate at maximum capacity without compromising performance.
• Adjust the sputtering parameters to maintain high-quality output, minimizing defects and inconsistencies.
• Regularly monitor and maintain the sputtering equipment to ensure it remains in optimal condition.
• Optimize the sputtering process to maximize the efficient use of materials, reducing waste.
• Work closely with teams from different departments to ensure smooth operations and address any cross-functional
• issues.
• Analyze data from the sputtering process to identify trends, issues, and areas for improvement.
• Based on data analysis, make precise adjustments to the sputtering machine to enhance performance and quality.
• Implement a continuous improvement approach to keep refining the sputtering process and achieve better results
• over time.
• Any other job assigned by superior.

Requirement:
• Diploma or Bachelor's degree in any Engineer-related field.
• Minimum 4 years of experience in manufacturing process related role for Diploma Holder
• Material Science & Chemistry Fresh Graduate for degree profile.
• Fresh Graduate with strong technical understanding
• Understanding of Sputtering technology
• Good knowledge of Minitab, Microsoft Office

Key Responsibilities:

1. Preventive Maintenance (PM):

• Lead and execute preventive maintenance strategies with technician team for all critical production equipment.
• Monitor equipment performance to identify potential issues and implement solutions to reduce downtime.
• Develop and update PM schedules and ensure compliance with maintenance procedures.

2. Troubleshooting and Major Equipment Downtime:

• Provide technical expertise in diagnosing and troubleshooting complex equipment issues during major breakdowns.
• Lead root cause analysis for equipment failures and implement corrective actions to prevent recurrence.
• Support the repair and maintenance team during critical equipment down situations.

3. Equipment Down Reporting:

• Track and report on equipment downtime, analysing data to identify trends and areas for improvement.
• Prepare detailed reports on equipment failures, downtime reasons, and actions taken to minimize future disruptions.

4. Production Planning Support:

• Assist in production planning by coordinating equipment availability and maintenance schedules to minimize impact on production timelines.
• Collaborate with production teams to optimize equipment usage and throughput.

5. New Material Qualification:

• Work closely with the QC team to qualify new materials and ensure they meet required specifications.
• Coordinate testing and evaluation processes for new materials, providing technical input to ensure compatibility with existing equipment.

6. Work Instructions and Process Improvement:

• Develop, review, and update detailed work instructions, standard operating procedures (SOPs), and maintenance manuals for equipment operation and repair.
• Ensure that work instructions are clear, comprehensive, and easy to follow for both operators and technician team.

7. Spare Parts Management:

• Manage spare parts inventory for critical equipment, ensuring optimal stock levels and fast access to required parts.

8. Machine Improvement & Optimization:

• Continuously evaluate production equipment for potential improvements, such as upgrades or modifications
• Lead initiatives to optimize existing equipment, reduce maintenance costs, and improve overall production efficiency.

Qualifications:

• Preferably with Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or related field.
• 2+ years of experience in engineering roles focused on equipment maintenance, troubleshooting, production support, or similar fields.
• Strong knowledge of preventive maintenance techniques, troubleshooting complex equipment issues, and working with various industrial systems and machinery.
• Proven ability to diagnose and resolve mechanical, electrical, and control system issues
• Ability to manage multiple priorities, coordinate cross-functional teams, and ensure timely completion of equipment improvement projects.
• Strong written and verbal communication skills, with experience in preparing reports, work instructions, and technical documentation.
• Full-time, on-site position located at Tampines.
• Occasional travel to other company sites (East region) may be required.

• Carry out work in accordance to safety procedures.
• Coordinate site resources.
• Designs and drafts construction drawings according to project specifications.
• Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.
• Inspect installations to ensure it adhere to design and equipment specifications.
• Interacting with contractors and customers using verbal and written communication
• Keep proper record of all works carried out on-site.
• Manage a team on-site to ensure works follow regulatory and project’s requirements.
• Supervising or training project team members.
• Estimating material, labor, or construction costs for budget preparation.
• Maintaining electrical equipment.
• Track work progress to ensure project specification and schedules are met.

Responsibilities:

• Carry out structural design and analysis to meet project requirement.
• Prepare design calculations & shop drawings for submission.
• Provide general technical support to the in-house operations team.
• Technical marketing of structural strengthening products.
• Attend meetings with clients for pre and post contract to meet project requirement.
• Accountable for effective co-ordination of projects as assigned.
• Ensure all safety and quality assurance procedures and standards are followed.

Requirements:

• Must possess at least a good Degree in Engineering (Civil) recognised by the Ministry of Manpower, Singapore and is familiar with the British American Design Standards, and Eurocodes.
• Able to perform structural analysis using design software such as STAADPro ETABS, Prokon etc.
• Familiar with AutoCAD application.
• Good command of spoken and written English.
• Possess initiative, analytical thinking abilities and able to work both independently and as a team.
• Possess positive attitude and interpersonal relationship skills.
• Foreigners: Minimum of two years' experience in local consultancy firms will be an advantage.

Creating technical reports for customers

Making plans using detailed drawings

Preparing estimates and budgets

Source for material, treatment and coating from different supplier

Develope and issue job travellers to production

Ability to communicate technical knowledge in a clear and understandable manner

Responsibilities:

- Collaborate with the sales/business development team to understand customer requirements and use cases

- Conduct POC, demo, testing and setup of security system and video analytics

- Process knowledge of basic security technology including video analytics and application scenarios

- Manage and execute new/existing projects

- Collaborate with product teams to address specific customer needs and feedback

- Design and propose security technology solutions tailored to different verticals

- Process market knowledge in physical security industry for verticals ie. transportation, commercial building, hospitality, etc.

- Forward looking in term of industry/technology trend to improve business portfolio

Requirements:

- Diploma or Degree in any discipline

- Ability to understand and address customer requirements and translate them into

technical solutions

- B2B (Business-to-Business) experience in robotic/physical security

- Process negotiation, networking, presentation, project management, market analysis, strategic skill will be an advantage

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Cloud Infrastructure Engineer (Endpoint Security) to join us!

Responsibilities:

· Work with Product Owner and Product Principals to operate the various endpoint security tools, including:

- EPP/EDR

- Data Loss Prevention

· Work with Central ICT Infra teams to operate the on-prem components of the SSE platform.

· Conduct system health check and proactively identify and troubleshoot issue in end-to-end manner.

· Manage the change, release, incident, problem management processes in ITSM platform.

· Document the requirement and specification to address the needs for all Public Service agencies.

• Comfortable with a 5-year direct contract
• At least 5 years of experience in the above domain areas

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience.

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS's privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Benefits

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Senior Cloud Infrastructure Engineer (Device Management) to join us!

Responsibilities:

Work with Product Owners, internal engineering team and Product Principals to oversee and co-ordinate the operation of various endpoint management tools, including:

1. Windows Autopilot
2. Intune
3. Application control
4. Scripting and automation
5. Virtual Desktop Infrastructure
6. Microsoft Graph API

• Co-ordinate with Central ICT Infra teams to operate the on-prem components of the above platforms.
• Oversee a team of Ops Engineers to manage the change, release, incident, problem management processes.
• Ensure timely handling of requests and queries.
• Lead incident response and recovery by analysing the root cause and submission of RCA report.
• Drive improvement in operation effectiveness by implementing the monitoring and alerting tools.
• Document the requirement and specification to address the needs for all Public Service agencies

Mandatory Requirements:

• Exam: Microsoft 365 Certified: Endpoint Administrator Associate, for demonstrating the skills and knowledge of endpoint management and security using Microsoft 365 tools and services.
• Proficient in PowerShell scripting

Additional Skillset(s) (Good to have):

• Prior experience in developing Windows desktop applications using C#, .NET
• Familiar with developing ServiceNow workflows
• Endpoint monitoring and observability for infrastructure reliability using tools such as NexThink, Riverbed, Dyatrace...etc

Additional 2 or more certifications (at least one from each group):

Group 1

1. DevOps Institute: Site Reliability Engineering Foundation or Site Reliability Engineering Practitioner, for demonstrating the skills and knowledge of applying DevOps principles and practices to the endpoint engineering process
2. ITIL 4 Foundation Certification, for demonstrating the skills and knowledge of the ITIL framework and best practices for ITSM.
3. Certified Information Systems Security Professional (CISSP) or CompTIA Cybersecurity Analyst (CySA+)

Group 2

1. Exam MS-102: Microsoft 365 Administrator: deploys and manages Microsoft 365 and performs Microsoft 365 tenant-level implementation and administration of cloud and hybrid environments
2. Exam AZ-104: Configure, manage, secure, and administer key professional functions in Microsoft Azure.
3. Exam AZ-140: Plan, deliver, manage, and monitor virtual desktop experiences and remote apps on Microsoft Azure for any device.
4. UiPath Certified Professional Automation Developer Associate or PL-500 Microsoft Certified: Power Automate RPA Developer Associate

Requirements:

• Comfortable with a 5-year direct contract (with perm benefits)
• At least 5 years of experience in the above domain areas

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience.

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS's privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Benefits

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Cybersecurity Engineer (Cloud Infrastructure and Log Management) to join us. The employment contract will end on 31 March 2026.

You will be working on:

• Responsible to develop, setup and maintain large scale log ingestion cloud infrastructure.
• Responsible to handle the log ingestion workflow from Subscriber till backend SOC.
• Develop automation for end-to-end log ingestion processes to facilitate scalable ingestion infrastructure and provide better Subscriber experience.
• Develop and maintain custom log parsers.
• Monitor and respond to incidents for the cloud infrastructure and log ingestion system.
• Provide consultancy to Subscribers and their contractors on their log ingestion matters.
• Assist Subscribers on-site to setup and troubleshoot their log management system, ensuring their log are successfully being forwarded to the SOC.
• Engage stakeholders and enhance operations to improve on the log ingestion workflow/pipeline.

To succeed in this role, you will ideally have:

• Minimum 3 years of working experience in Cybersecurity.
• Minimum 3 years of working experience in one or more of AWS, Azure or Google Cloud Platform, doing Cloud Infrastructure or Cloud DevOps.
• Experience with IAC deployments and it’s best practices.
• Knowledge of SIEM or log parsers will be an added advantage.
• Good to have knowledge on Node.js, Python or other scripting languages
• Good to have knowledge and experience on GitOps
• Possess good communication skills and interpersonal skills.
• Passion for improving operations to ensure the system are secure and resilient.
• Self-motivated, driven, and possesses a strong aptitude for continuous learning.
• Good team-player who is willing to help the team to succeed in the achieving the objectives.

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience. Interested applicants, please click "Apply Now".

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Key Responsibilities:

• Design power supply hardware (and/or embedded firmware) for various switching mode power converters (PFC, Flyback, Forward, Buck, Boost, Resonant topologies including LLC, series resonant, and Synchronous Rectification), ranging from 1,000W to 22,000W, for on-board/off-board charger.
• Theoretical analysis of concepts (calculation and simulation).
• Practical and detailed evaluation of all types of power circuits.
• Enhance and improve circuit performances such as Efficiency and Reliability.
• System design with creation 2D models and design 3D together with ME team.
• Schematic creation and PCB design support.
• As project key person to start from concept to mass production stage.
• Implement design for manufacturing and design for automation. DFx.
• Patent and technology creation, defining new power requirements.

Key Requirements:

• BSc, MSc, PhD, or researcher with Min. 5 years’ experience.
• Experience with EV chargers and onboard chargers (OBC) is a plus.
• Familiar with power measurement equipment.
• With solid technical know-how on the transformer, power Mosfet, PWM controller, and synchronous rectifier circuits.
• Understand the application of PID controllers and control loop analysis.
• Knowledge of EMC/IEC/UL/EN standards.
• Experience in schematic and PCB layout designs.

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 5+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Key Responsibilities:

• Design power supply hardware for various switching mode power converters (3-phase Vienna Rectifier, NPC, PFC, Flyback, Forward, Buck, Boost, Resonant topologies, and Synchronous Rectification), ranging from 1,000W to 22,000W.
• Design on-board charger requirement, compact and high-power density requirement.
• Design to meet functional safety and reliability standards. For automotive grade.
• Theoretical analysis of concepts (calculation and simulation).
• Practical and detailed evaluation of all types of power circuits.
• Enhance and improve circuit performances such as Efficiency and Reliability.
• Creation of 3D/2D models, assembly drawings, PCB, and schematic designs.
• Support firmware development using various DSP/MCU platforms.
• As project key person to start from concept to mass production stage.
• Implement design for manufacturing and design for automation. DFx.
• Patent and technology creation, defining new power requirements.
• Electrical and Firmware architectures (lead and support).

Key Requirements:

• BSc, MSc, PhD, or researcher with Min. 8 years experience.
• Experience with EV chargers and onboard chargers (OBC) is a plus.
• Familiar with power measurement equipment.
• With solid technical know-how on the transformer, power Mosfet, PWM controller, and synchronous rectifier circuits.
• Understand the application of PID controllers and control loop analysis.
• Knowledge of EMC/IEC/UL/EN standards.
• Experience in PCB schematic and layout designs.

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Description

•Check and analysis drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Oversee the projects, ensure compliance of contracts and the drawings with regulatory specifications.

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

•Attend meetings with architects and consultants

•Other ad-hoc duties as assigned

Job Requirements: Possess at least diploma in Electrical Engineering and Mechanical Engineering (M&E) or equivalent

•However, entry level are encouraged to apply, from recognized University by Singapore PE Board as training will be provided.

•Good operational planning for construction projects

•Good in communication and written abilities

•Required skill: Able to use Microsoft Project to present schedule to the client

•Knowledge in Construction and Renovation.

•Skills required: Autocad

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 3+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Key Responsibilities:

• Design power supply hardware (and/or embedded firmware) for various switching mode power converters (PFC, Flyback, Forward, Buck, Boost, Resonant topologies including LLC, series resonant, and Synchronous Rectification), ranging from 1,000W to 22,000W, for on-board/off-board charger.
• Theoretical analysis of concepts (calculation and simulation).
• Practical and detailed evaluation of all types of power circuits.
• Enhance and improve circuit performances such as Efficiency and Reliability.
• System design with creation 2D models and design 3D together with ME team.
• Schematic creation and PCB design support.
• As project key person to start from concept to mass production stage.
• Implement design for manufacturing and design for automation. DFx.
• Patent and technology creation, defining new power requirements.

Key Requirements:

• BSc, MSc, PhD, or researcher with Min. 3 years’ experience.
• Experience with EV chargers and onboard chargers (OBC) is a plus.
• Familiar with power measurement equipment.
• With solid technical know-how on the transformer, power Mosfet, PWM controller, and synchronous rectifier circuits.
• Understand the application of PID controllers and control loop analysis.
• Knowledge of EMC/IEC/UL/EN standards.
• Experience in schematic and PCB layout designs.

Job Overview

Do you want to further develop your analytical mind to pinpoint core issue and earn the satisfaction of resolving it ? Do you like working with fellow team members to improve your job routine and environment ? Do you crave job security and yet be at the frontier of technology?

Join us at UMC (SG), a leading global semiconductor foundry company manufacturing microchips for use in the present and for the future. In course of your work, you will learn internationally acclaimed analytical skills and techniques to apply in your work and personal life. Have the chance to work with engineers from other fields and process to resolve and improve current procedures.Seize the opportunity to take part at senior level in Quality improvement competition host in Taiwan national level and earn accolades as an elite engineer with awards and certification. Be recognized as an engineer of high calibre in Singapore and internationally.

Responsibilities

1. Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality and lot handling
2. Maintain Equipment capability for production and meet production demand
3. Engage with Production line and Process Engineers to balance tool availability for production, troubleshooting and scheduled maintenance
4. Engage in Equipment troubleshooting and production quality improvement.
5. Evaluation of new equipment/materials and retrofits of Equipment for better efficiency / production quality

Qualifications

1. Possess at least a Bachelor's Degree in engineering in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering ,Physics, Automation, Aerospace Engineering
2. Able to think critically with strong analytical skills
3. Possess good communication skills and time management skills
4. Prior leadership or competition experience in school activities will be an advantage
5. Must be willing to commit shift work
6. At least 2 years with relevant working experience in semiconductor industry foundry

Job Description:

We are seeking a highly skilled Ansible Automation Engineer to design and implement automation solutions tailored to diverse customer needs. The successful candidate will focus on developing robust playbooks and workflows to automate day-to-day IT operations across multiple domains, ensuring seamless integrations with industry-standard tools like Remedy and Jira.

Location: Onsite - Singapore

Experience Level : 5 years

Key Responsibilities:

• Collaborate with customers to understand automation requirements and define scope and workflows.

• Develop and maintain Ansible playbooks to automate day-to-day IT tasks across middleware, database, networking, infrastructure provisioning etc.

• Implement and manage integrations with ITSM tools like Remedy and Jira to streamline incident and change management processes.

• Ensure automation frameworks adhere to best practices in security and scalability.

• Troubleshoot, test, and validate playbooks to ensure reliable deployments and operations.

• Work closely with cross-functional teams to align automation strategies with overall IT objectives.

• Document automation workflows, processes, and best practices.

• Document automation workflows, processes, and best practices.

Required Skills:

• Ansible Expertise: Strong proficiency in Ansible and Ansible Automation Platform for playbook development, role creation, and managing inventory.

• System Administration: In-depth knowledge of Linux (RHEL, CentOS, Ubuntu) and Windows environments, including configuration and troubleshooting.

• Scripting and Development: Expertise in Python, Bash/Shell scripting, and YAML for automation and customization.

• Networking Automation: Hands-on experience with network device configurations (Cisco, Juniper, Palo Alto etc.) using Ansible.

• Database Management: Familiarity with automating database tasks for MySQL, PostgreSQL, Oracle, or MS SQL.

• ITSM Tools Integration: Proven experience with integrating ITSM tools such as Remedy and Jira.

• DevOps Practices: Knowledge of CI/CD tools like Jenkins, GitLab, or Azure DevOps, including pipeline automation.

• Containerization: Basic knowledge of Docker and Kubernetes for containerized application management and deployment automation.

• Security Practices: Familiarity with SSH, SSL/TLS, and other security mechanisms for secure automation.

• Version Control: Proficiency with Git for version control and collaboration.

Preferred Qualifications:

• Experience in deploying Ansible Automation Platform (AAP).

• Certifications: Red Hat Certified Specialist in Ansible Automation or equivalent certifications.

• Understanding of CI/CD pipelines and workflows.

• Certifications in Ansible or related IT automation domains.

Why Join Us?:

• Opportunity to work on diverse and challenging automation projects.

• Be part of a team driving digital transformation for top-tier clients.

• Access to cutting-edge technologies and continuous learning opportunities.

About your role

• Design, maintain, and scale testing frameworks, ensuring comprehensive coverage and reliability.
• Integrate with CI/CD pipeline to ensure tests are executed as part of the development lifecycle.
• Utilize testing tools to develop and execute automated and unit tests.
• Manage bug tracking and test case management using Jira, with Zephyr to streamline test planning and execution within the Unity development workflow.
• Develop detailed automated and unit test plans and test cases, and maintain them.
• Optimize automated and unit testing strategies and tools to meet the unique needs of software development.
• Analyze test results,document systematically, and collaborate with the development team for issue resolution.
• Stay informed on the latest testing technologies, and best practices to continuously improve the testing process.

Requirements

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• At least 2 years of experience in QA process.
• Experienced with CI/CD practices.
• Skilled in using Jira for issue tracking, with proficiency in Zephyr for managing test cycles.
• Strong communication abilities and a detail-oriented mindset as a collaborative team member.

Key Responsibilities:

• Design, develop, and maintain scalable cloud-native applications using .Net Core (C#), Web API, and modern technologies
• Build seamless front-end experiences with Reactjs, Nextjs, and integrate with back-end services
• Develop data access layers using Entity Framework Core and integrate with PostgreSQL and AWS Redshift databases
• Deploy, monitor, and manage applications on cloud platforms (AWS, Azure), utilizing services like Lambda, API Gateway, S3, and CloudWatch
• Develop and maintain containerized applications using AWS EKS or Openshift
• Collaborate with cross-functional teams to design, develop, and ship new features
• Ensure high-performance, quality, and responsiveness of applications
• Maintain code quality through reviews, unit tests, and best practices
• Troubleshoot, debug, and upgrade existing software
• Stay current with emerging technologies to improve efficiency and scalability

Requirements:

• Education: Degree in Computer Science, Information Technology, or related field
• Technical Experience:
  • .Net Core (C#) and Web API
  • Entity Framework Core
  • Nextjs, Reactjs, and Nodejs
  • Database experience (Postgres, AWS Redshift)
  • Cloud-native app development (AWS/Azure preferred)
  • Container platforms (AWS EKS, Openshift)
• Nice to Have: Familiarity with Python

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R21102607

Business Registration Number: 201735941W

Licence Number: 18S9037

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• Design and synthesis of organic functional materials with persistent luminescence
• Design and synthesis of organic functional materials for theranostic applications
• Design and synthesis of nanomaterials for theranostic applications
• Cellular and bacteria studies to evaluate fluorescent probes
• Responsible for conducting high quality research, writing academic papers and collaboration with other researchers

Job Requirements

• Bachelor degree in Chemistry, Materials, Polymers and Chemical Engineering.
• Good knowledge in synthesis and characterization.
• Have good publication record and relevant research experience.
• Highly motivated and independent, strong problem-solving skills
• Good written and spoken communication
• Open to fixed-term contract

Job Summary

The role involves offering overarching guidance to ensure the successful completion of a project while maintaining adherence to the quality standards established by the company. Responsibilities include, but are not limited to, identifying critical aspects of project execution and proactively addressing potential issues before they arise. Additionally, the position requires the verification and management of man-hour consumption across various disciplines throughout the project's duration.

Duties & Responsibilities

• Involvement in projects with budgets that start at $3 million and can exceed $20 million.

• Assist Senior Project Engineer to oversee the planning, scheduling, execution, and coordination of the technical aspects of projects.

• Facilitate collaboration between various disciplines, including procurement and construction teams.

• Coordinate cost estimation for Engineering, Procurement, and Construction (EPC) activities.

• Maintain regular communication with assigned project clients to facilitate their engagement throughout the implementation process.

• Participate in client meetings to address and resolve project-related issues effectively.

• Oversee project documentation and manage design changes.

• Ensure the seamless execution of projects in alignment with established strategies and objectives across all phases, including feasibility studies, front-end engineering design (FEED), detailed design, construction, commissioning, start-up, and project handover.

• Guarantee that projects adhere to safety, cost, schedule, and quality standards.

• Conduct comprehensive contract reviews, risk assessments, and develop contingency plans.

• Organize proposal and project task forces, as well as allocate staff effectively.

• Initiate kick-off meetings with clients and internal teams.

• Prepare and analyse the overall budget cost plan.

• Monitor and evaluate project operations and timelines.

• Act as the company representative in interactions with clients.

• Develop project specifications and establish systems or processes for effective project execution.

Key Requirements

• Bachelor’s degree in mechanical engineering or a related engineering discipline, with minimum of 3 to 5 years of experience

• Comprehensive understanding of various engineering disciplines, including Process Technical knowledge.

Knowledge & Skills

• Proficient in Basic Design and Piping and Instrumentation Diagrams (P&ID).

• Familiarity with project management fundamentals, front-end engineering FEED, and relevant planning and scheduling tools is preferred.

• Demonstrated success in EPC Project Management within the Oil & Gas and Petrochemical sectors.

• A team-oriented individual who excels in collaboration, showcasing strong communication and interpersonal abilities, alongside outstanding presentation, technical, analytical, and troubleshooting skills.

• Highly self-driven, with the capacity to proactively create plans and carry out tasks with professionalism, diligence, and efficiency, while adhering to established company protocols.

• Design electrical systems for construction projects, including power distribution, lighting, and safety systems.
• Prepare detailed electrical drawings, specifications, and technical documents.
• Conduct load calculations and electrical system analysis to ensure efficiency and compliance with codes.
• Collaborate with architects and other engineers to integrate electrical systems into overall project designs.
• Review and approve electrical contractor submittals, shop drawings, and material samples.
• Conduct site inspections to monitor the progress of electrical installations and ensure compliance with specifications and standards.
• Troubleshoot and resolve electrical issues that arise during construction and commissioning phases.
• Ensure that all electrical systems are installed safely, efficiently, and in accordance with local codes and standards.
• Prepare progress reports and documentation for project management and stakeholders.

Job Scope:

• To review project specifications and technical clarifications
• To prepare method statements and check drawing discrepancies
• To carry out project planning, design, material requisition, cost control, project supervision and documentation
• To supervise the construction works and coordinate with client’s representatives, consultants and sub-contractors on technical matters
• To target and ensure timely and smooth progress of works
• To ensure quality of works is achieved and safety & environmental regulations are complied with
• To ensure project activities complied with the Company’s ISO system

Requirements:

• Fresh Graduates are welcome
• Min Diploma in Construction related major.

Job Description:

• Responsible for planning, managing and ensuring smooth implementation and monitoring of projects assigned from inception to completion within the specified timeframe and of the desired quality.
• Liaise with authorities, consultants and subcontractors.
• Implement architectural and structural works.
• Good communication skills to enhance good team working spirit.

Requirements:

• Experience in management of projects will be advantageous.
• Recognized degree in Civil/Structural Engineering by P.E. Board / BCA.
• Initiative, self-motivated, possess a strong drive with high responsibility and result oriented.
• Preferably 1 - 5 years working experience in Civil & Structural works.
• Experience in engineering software and AutoCad would be an advantage.
• Fresh graduates may apply.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.