As a Senior Package Design Engineering (PDE) Central Engineering System and Analytics (CESA) Engineer, you will develop integrated solutions to empower Backend Operations to make data-driven and heuristics-based decisions. You will work across Global Operations and sites to improve Cost, Scale, Quality, and Cycle Time by defining and designing data architecture and collaborating with key partners.

Responsibilities

• Yield Enhancement (YE) lots analysisLead YE lot analysis including reconstructing fuse identififaction (FID) for traceability, statistic comparison for different group
  
• Yield modelling / pareto benchmarkingIdentify actionable opportunities from YE lots
  Develop and improve Yield Models for HBM
  Periodically improve models based on actual performance
  
• Best Known Methods (BKM) DeploymentDevelop BKM’s for YE and drive implementation
  Identify/align BKMs and monitor implementation
  Works with different teams in the identification of critical metrics

Requirements:

• PhD/Masters/Bachelors in Statistics, Mathematics, or a related field; advanced degree preferred.
• Minimum of 3 years of experience in semiconductor manufacturing or related fields
• Preferably with experienced in Package Design Engineering and Yield Enhancement
• Strong understanding and knowledge of semiconductor manufacturing processes and technologies.
• Proficiency in statistical/machine learning and statistical techniques skills will be additional advantageous;
• Experience in MRDA will be a plus
• Proven ability to make decisions, multi-task, and solve problems and address root causes.
• Exhibit critical thinking to see opportunities.
• Effective communication skills in verbal/written.
• Self-motivated. Able to work independently with minimal supervision.
• Able to travel as required to support department and company objectives.

Job Responsibilities:

• Schematic capture, optimization and simulation.
• Develop efficient circuit designs and digital STD cell library meeting performance, power and area target.
• Study and invent new digital STD cell circuit architecture.
• Work with a layout designer to implement the layout of circuit.

Requirements:

• Bachelor's degree or above in Electronics, Computer Science, or related fields.
• Experience on high performance and low-power analog design.
• Experience on deep sub-micron process technology (12nm and below) taped outs.
• Excellent interpersonal and communication skills.

As a PDE Central Process Integration Principal Engineer, you will lead the development and integration of assembly and packaging processes for cutting-edge semiconductor products, such as DRAM, NAND, controllers, graphics, 3D-stacked (3DS) technologies, and High Bandwidth Memory (HBM). The ideal candidate will drive innovation in packaging technology and ensure seamless process integration during new product introductions.

This position involves working closely with multi-functional teams to research, design, and implement new packaging solutions while optimizing production yields and ensuring the successful commercialization of next-generation semiconductor technologies.

JOB RESPONSIBILITIES

Promote worldwide synergy

• Improve benchmark performance and efficiency gains through global project management and execution
• Network BKM leveraging and enhancement, business process creation and re-engineering
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Sites, TD, Product Engineering, Global Quality
• Help drive and fix the issue where necessary

Drive FE-AT Integration initiatives

• Business process governance between Fab – Assembly (WSPEC, FE2BE forum, WPSWAT)
• Lead & drive FE-AT excursions
• Yield, DPM related issues that involves both Fab – Assembly

Cross sites benchmark & achieve BIC yield performance

• Lead PI programs, PI Loop taskforce and/or team in network to address yield and quality challenges, optimize process flow

Identify, Propose & Drive new initiatives programs

• Propose & lead strategic programs to shift left/ shorten cycle learning across TN phase (PD, NPI, HVM)
• Process flow simplifications & standardizations
• Cross technology streamline (Process, tools, etc)
• Sites expansions process & qualification requirements
• Drive roadmaps with multi-functional teams (FE, AT Procurement, APTD, APPDE)

JOB QUALIFICATIONS

• Bachelor's degree in Engineering (Electrical, Mechanical, Materials Science, or related field).
• 3+ years of experience in semiconductor packaging technology development, process integration, or new product introduction (NPI)
• Strong background in frontend fabrication processes (FAB)
• Proven experience in data analysis, statistical process control (SPC), and process optimization.
• Strong problem-solving skills, attention to detail, and a proactive approach to technology development.
• Excellent communication and teamwork skills, with the ability to work across departments and with external partners.
• Hands-on experience in the development and implementation of cutting-edge semiconductor packaging technologies.
• Experience leading multi-functional teams in process development, technology transfer, and ramp-up.
• In-depth knowledge of the latest industry standards and trends in semiconductor packaging and assembly.

As a PDE Central Process Integration (PI) Senior Engineer, you will lead the development and integration of assembly and packaging processes for cutting-edge semiconductor products, such as DRAM, NAND, controllers, graphics, 3D-stacked (3DS) technologies, and High Bandwidth Memory (HBM). The ideal candidate will drive innovation in packaging technology and ensure seamless process integration during new product introductions.

This position involves working closely with multi-functional teams to research, design, and implement new packaging solutions while optimizing production yields and ensuring the successful commercialization of next-generation semiconductor technologies.

JOB RESPONSIBILITIES

Promote worldwide alignment

• Improve benchmark performance and efficiency gains through global project management and execution
• Network BKM leveraging and enhancement, business process creation and re-engineering
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Sites, TD, Product Engineering, Global Quality
• Help drive and fix the issue where necessary

Drive FE-AT Integration initiatives

• Business process governance between Fab – Assembly (WSPEC, FE2BE forum, WPSWAT)
• Lead & drive FE-AT excursions
• Yield, DPM related issues that involves both Fab – Assembly

Cross sites benchmark & achieve BIC yield performance

• Lead PI programs, PI Loop taskforce and/or team in network to address yield and quality challenges, optimize process flow

Identify, Propose & Drive new initiatives programs

• Propose & lead strategic programs to shift left/ shorten cycle learning across TN phase (PD, NPI, HVM)
• Process flow simplifications & standardizations
• Cross technology streamline (Process, tools, etc)
• Sites expansions process & qualification requirements
• Drive roadmaps with multi-functional teams (FE, AT Procurement, APTD, APPDE)

Requirements

• Bachelor's degree in Engineering (Electrical, Mechanical, Materials Science, or related field).
• 3+ years of experience in semiconductor packaging technology development, process integration, or new product introduction (NPI)
• Strong background in frontend fabrication processes (FAB)
• Proven experience in data analysis, statistical process control (SPC), and process optimization.
• Strong problem-solving skills, attention to detail, and a proactive approach to technology development.
• Excellent communication and teamwork skills, with the ability to work across departments and with external partners.
• Hands-on experience in the development and implementation of cutting-edge semiconductor packaging technologies.
• Experience leading multi-functional teams in process development, technology transfer, and ramp-up.
• In-depth knowledge of the latest industry standards and trends in semiconductor packaging and assembly.

Keen on the role? Apply now!

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 36 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

As an NPI Engineer, you will be responsible for overseeing the transition of new products from design to full-scale production. You will work closely with cross-functional teams, including Product Development, Manufacturing, Quality, and Supply Chain, to ensure the smooth introduction of new products while maintaining efficiency, quality, and cost-effectiveness. Your role will be instrumental in implementing new processes, optimizing manufacturing methods, and ensuring product manufacturability.

Key Responsibilities:

• Product Introduction & Process Development: Collaborate with the design and engineering teams to evaluate product designs for manufacturability, scalability, and cost efficiency.
• Cross-Functional Collaboration: Partner with Product Development, Quality Assurance, and Supply Chain to define project requirements and timelines, supporting a seamless transition to manufacturing.
• Production Line Setup: Develop and implement production line processes, workflows, and assembly instructions to achieve quality and production targets.
• Process Validation & Optimization: Conduct process validation tests, analyze data, and implement adjustments to optimize production yields and reduce waste.
• Supplier Management: Work with suppliers to ensure components and materials meet required specifications and quality standards.
• Continuous Improvement: Drive continuous improvement initiatives for production processes, focusing on quality, efficiency, and cost savings.
• Documentation: Develop and maintain technical documentation, including process flow diagrams, PFMEA, work instructions, and BOMs.
• Troubleshooting: Investigate and resolve production issues, providing timely solutions to minimize downtime and production delays.

Qualifications:

• Education: Bachelor’s degree in Mechanical Engineering, Industrial Engineering, or related field.
• Experience: 3+ years of experience in NPI, process engineering, or manufacturing engineering, ideally within precision engineering.
• Technical Skills: Strong understanding of production process development, validation, and troubleshooting. Experience with lean manufacturing principles and Six Sigma is a plus.
• Communication Skills: Ability to work cross-functionally and communicate complex technical information effectively.
• Analytical Skills: Proven ability to analyze data, identify trends, and make recommendations for process improvements.

Job description

• Design, develop, test, deploy, maintain and improve of software application

• Documentation of software design and description required in a software process life cycle

• Create and maintain documentation for software installations, changes and upgrades

• Involve in the setup and deployment of software for developmental, testing and operational use

• Manage individual project priorities, deadlines and deliverables

• Evaluate system architecture and make recommendations as required

• Perform peer-to-peer code reviews

Requirement

• Proficient in C, C#, NodeJS, Augular or ReactJS

• Familiar with working in Windows environment

• Good knowledge in Javascript / RESTful API / HTML5 / CSS3 / Typescript will be added advantage

• Good knowledge in SQL / NoSQL databases would be added advantage

• Good knowledge in Network Communication and configuration would be added advantage

• Team player with good interpersonal, written and verbal communication skills

Job Description:

• Perform electrical and mechanical assembly work for the semiconductor industry.
• Perform equipment assembly according to engineering drawings.
• Perform installation, repair, inspection, reassembly, refitting, and adjusting products as required.
• Coordinate M&E engineering work and work closely with other department staff to resolve site discrepancies and technical issues.
• Maintain work area clean, safe, and orderly.
• Perform repair pipe and plumbing if needed.
• Planning / Scheduling and coordination of M&E works.
• Oversee and ensure works are carried out by the approved drawings, materials, and method statements.
• Liaise with clients, consultants, relevant authorities, and sub-contractors on M&E issues.
• Update maintenance daily schedule.
• Any other duties as may be assigned.

Job Requirements:

• Minimum 3 years of relevant experience in the Construction industry.
• Diploma/ Degree in Mechanical & Electrical Engineering or related fields.
• Strong building and M&E knowledge with hands-on experiences.
• Positive attitude, willingness to learn, and good team player.
• Entry-level candidates are welcome to apply.

Others:

• Working hours: Monday to Friday - 8:30 am to 5:30 pm
• Saturday - 8:30 am to 12:00 pm
• Salary range: $2500 - $5000 (Price Negotiation)
  

Job requirement:

• Degree in Mechanical or Electrical Engineering.
• Must have at least 3 years of related experience.
• Proficient in Microsoft Office and AutoCAD.

Responsibilities:

• Responsible for all on-site technical and engineering matters.
• Determines project schedule by monitoring project progress, coordinating activities, resolving site problems.
• Prepares project status reports.
• Coordinates structural details and design features within the project.
• Flexible and able to work well in a fast-paced environment.
• Ensure works carried out meet Company's quality standard and contractual requirements.

• Software Development, Implementation and Deployment in the area of industrial automation systems, with Human Machine Interface (HMI), including but not limited to the following sub-systems: Motion Control System, Vision System, Digital and Analog Input/output Control, Device control and Database.
• Work with customer and application team to configure, install and test new equipment.
• Provide software user training to customers
• Field service support, field deployment and on-site / remote debugging
• Overseas travel is required with short notice period.

Qualifications

• Candidate must possess at least Bachelor's Degree and/or equivalent, preferrably in Electrical / Computer Engineering and/or any other relevant course of study.
• Preferably with [1 - 3] Year(s) of working experience in Engineering in automation and/or any other related field/industry is required for this position.
• Fresh graduates with relevant knowledge in their course of study are welcome to apply.

Other Information

Skillset(s) Requirement:

• Required Knowledge: Sofware development
• Required Skill(s): C#, C++, VB.NET, WPF, Winform, MFC, MySQL Database
• Preferably Entry / Junior specialized in [Engineering] - [expertise, Electrical / Mechatronics / Computer Engineering] or equivalent.

Attributes:

• Can do attitude
• Adaptable to a fast-paced environment
• Able to work independently
• Good team player
• Highly logical

• Provide engineering support to various telecommunication equipment installations, testing, patching, and migration.
• Responsible for implementing Outside Plant Cable Networks, such as RF cable, structured cable, Fiber optic cable installation, and testing.
• Responsible for fixing and troubleshooting ADSL Modem, CISCO Routers, and wireless APsPerf
• Perform fault diagnosis, analysis & rectification of LAN, WAN, and Telephone issues
• Perform site acquisition, site survey, acceptance test plan(ATP), and network planning of new sites to roll out and reconfiguration of sites
• Provide engineering support activities either remotely, or on-site.
• Rotational 24x7 standby duties required

technical understanding requirement .

a) understands the drawings and scope of works

b) understands the implications of different technicalchoice so as to meet the project objectives

c) involve in providing value engineering solutions basing on his knowledge .

d) to have knowledge in the preparationof engineering proect proposals and method statements .

e) carry out project objectives so align with company goals.

f) to co-ordinate program and monitor site work , materials , plant and equipment .

g) involving in client /consultant / sub-contractor meetings .

h) to carry out short term planning to meet site progress .

g) shop / as build drawing preparation .

h) Assists project manager in monthly progree report

Job scope

- Carrying out Various noise monitoring and noise consultancy at workplace and construction site.

- To perform noise impact assessments (NIA), noise management plans (NMP), and workplace noise assessments.

- Carry out noise prediction by using company proprietary spreadsheets and SoundPLAN Acoustic Modeling Software

- Various noise measurements for vessel at dock site

- Measurement and analysis of whole body and hand arm vibration.

- Preparation of proposal, test methods, test plans and test report for clients.

Job Requirements

- Able to work independently with minimal guidance and supervision.

- Effective communication skill with customer.

- Technical knowledge in the field, especially as it relates to acoustic engineering.

-Support and report directly to Senior Acoustic Consultant

Job Scope:

To design and develop Application Software//Embedded firmware for user interface equipment, and device control equipment as follows:-

· Designs and implements systems using a variety of languages (e.g. C, C++, C#, Java, Python, etc.);

· Designs enhancements, updates, and programming changes for subsystems, including embedded code;

· Writes and executes complete testing plans, protocols, and documentation;

· Identifies and debugs, and creates solutions for issues with code and integration into application architecture;

· Collaborates and communicates with management, internal, and outsourced development partners regarding firmware design status, project progress, and issue resolution; and

· Analyzes designs to determine coding, programming, and integration activities required based on general objectives and knowledge of overall architecture of product or solution.

Requirements:

1. Degree in Computer Science or Embedded System.

2. Proficiency and experience in C, C++, C#, Java, UML, Docker.

3. Good knowledge in application software programing for Linux and Windows.

4. Knowledge and experience with network programming and database programming.

5. Familiar with C#.Net full stack development.

6. Knowledge about containerized microservice solution.

7. Knowledge about aws/azure cloud architecture.

The duties and responsibilities of a mechanical engineer include

• Identifying deficiencies in mechanical processes and developing improvements
• Designing and developing prototypes
• Analyzing and testing prototypes and each revision of a device
• Designing, manufacturing, and installing components that fulfill requirements
• Analyzing problems or deficiencies and developing solutions to resolve them

Job Scope

• Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.
• Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.
• Generate BOM and RFQ document.
• Communicate with contractor for automation equipment panel fabrication.
• Prepare factory acceptance test document for automation equipment panel.
• Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.
• Provide support on site installation.
• Updating of Circuit diagram, Control device and Equipment Installation layout.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

RAYMOND NG JUN HAN | EA Personnel No.: R1657009

Responsibilities:

- Design and implement integration solutions for various physical security systems, including access control, video surveillance, intrusion detection, video analytics and alarm systems

- Ability to understand and address customer requirements and translate them into technical solutions

- Collaborate with product teams to address specific customer needs and feedback

- Design and propose security technology solutions tailored to different verticals

- Collaborate with cross-functional teams to gather requirements and define project scope

- Conduct site surveys and assessments to determine integration needs and best practices

- Conduct POC, demo, testing and setup of security system and video analytics

- Manage and execute projects with strong project management skills

- Develop documentation, including system specifications, integration plans, and user manuals

- Stay updated on industry trends, technologies, and best practices related to physical security

Requirements:

- Bachelor’s degree in Computer Science, Engineering, or a related subject

- Programming skills in Python, C++ and/or Javascript

- Fullstack experience is strongly preferred

- Strong understanding of networking, database management, and software integration

- Familiarity with industry standards and protocols (e.g., ONVIF, BACnet, etc.)

Nice to have:

- Professional experience working with VMS systems and integrating 3rd party solutions

- B2B (Business-to-Business) experience in physical security

- Technical security system certifications (I.e., Gallagher, Genetec, BICSI, Milestone) and/or related IT (i.e., CCNA) certifications preferred

- Possess market knowledge in physical security industry for verticals ie. transportation, commercial building, hospitality, etc.

Responsibilities:

• Develop and enhance robot software for the Smart+ RMF platform, our cloud based solution that enables remote intervention, robot management and teleoperation for any robot in the world.
• Write the code that enables Smart+ to handle new robots brought into the ecosystem.
• Integrate our robots with the world, by implementing new workflows and interactions with different systems.
• Collaborate with senior stakeholders to understand business requirements and translate them into technical specifications.
• Participate in daily standups, sprint review/planning, code reviews, and testing on physical robots as part of our agile development process.
• Produce clean, testable, and maintainable code while adhering to best practices.
• Support technical deployments both remotely and on-premise and address any issues that arise.
• Contribute to our open-source strategy, including the development of OpenRMF and ROS2.
• Support technical partnerships within our ecosystem network, including those in robotics, security, and facility management.
• Assist in defining product direction and participate in the overall architecture design and documentation for the Smart+ platform.

Requirements:

• Degree in Computer Science, Engineering, or a related field.
• 2+ years of relevant industrial experience (robotics, fleet management, system integration).
• 1+ years of professional experience with ROS, building production-level robotics systems.
• Strong proficiency in C++ and Python, with a solid background in ROS.
• Strong knowledge of networking protocols such as REST, MQTT, Zenoh, WebRTC, TCP/IP, UDP, and CAN.
• Excellent communication skills to effectively collaborate with both technical and non-technical stakeholders.

Responsibilities:

• Architect and implement scalable control and navigation solutions for AMRs utilizing your expertise in ROS, C++, and Python. Your focus will be on robustness, efficiency, and adaptability in real-world environments.
• Evaluate and integrate third-party systems (HW/SW) to enhance KABAM robots' capabilities.
• Conduct rigorous field tests to validate the reliability and performance of navigation systems in diverse outdoor conditions. Leverage insights gained to iteratively improve and optimize navigation algorithms, incorporating SLAM, motion planning, and perception techniques.
• Maintain comprehensive documentation of design, development, and deployment processes. Foster a culture of knowledge sharing within the team by presenting insights and lessons learned in regular sessions.
• Provide expert support for remote robot deployments at customer sites worldwide. Your troubleshooting skills and hands-on assistance will ensure seamless integration and operation of our solutions.
• Stay abreast of the latest advancements in robotics technology. Engage in continuous R&D efforts to explore new methodologies and technologies that can elevate the capabilities and performance of our AMRs. Implement findings to enhance existing systems and processes, keeping KABAM at the forefront of technological innovation.

Requirements:

• Education – Bachelors or Masters in Computer Science/Electrical Engineering/Mechanical Engineering with a focus in robotics, mechatronics, or related fields
• Experience – Bachelors (with at least 3 years relevant experience) or Masters (with at least 1 years relevant work experience)
• Industry – Previous experience in a robotics company preferred
• Supervisory – Personnel management is nice to have. Project management/technical lead experience is preferred
• Language – English (required), Mandarin (desirable)
• Technology – C++/Python, Linux, git, ROS; SLAM, motion planning, or perception techniques
• Coordinating the Work and Activities of Others — Yes
• Guiding, Directing, and Motivating — Yes
• Making Decisions and Solving Problems — Yes

Basic salary: ($3200 - $4500)

Location: Serangoon

Working hours: Mon - Fri, 8.30am to 6pm

Job Description

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Job Requirements

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts
• Able to speak both English and Mandarin to liaise with Chinese speaking clients

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Summary:

• Basic up to $4500
• Variable bonus
• Location: Serangoon
• 5 days work week, 8-6pm

Key Responsibilities:

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit
• Other related adhoc duties

Key Requirements:

• Min Diploma in Electronics Engineering
• Min 2 years of relevant work experience in electronics manufacturing indusrty

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Remuneration: Basic with AWS & VB

+ $120 Transport Allowance + $66 (Flexible Benefit Allowance) + eMedical Card (cover spouse + children under 18)

Work location: MacPherson

Working hours: Monday to Friday

Job Description:

• Responsible for planning and implementing the execution of preventive and corrective programs within schedule in compliance to regulatory standards and requirements.
• Perform troubleshooting/ faut diagnosis/ failure analysis to determine cause of failure for equipment.
• Development of Standard Operating procedures (SOP) and Work Instructions (WI) to technicians to develop their competence.
• Develop and perform Risk Assessments to evaluate mitigation measures for all maintenance activities.
• Establish and maintain proper document system to achieve all jobs internally for sharing and audit purposes.
• Assist in identification, planning and reviewing of necessary training needs for mentoring and coaching of maintenance staffs.
• Preparation and write maintenance and spares consumption report.
• Perform other duties as instructed by Management.

Job Requirements:

• Degree in Maintenance Engineering or related discipline
• 2–3 years of relevant work experience
• Ability to relate work with different stakeholders
• Proficiency in Excel, Words and Powerpoint
• Able to think and work independently and as a team member in a challenging environment

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to develop a flexible array ultrasound imaging system for velocity estimation.

Key Responsibilities:

• Participate in and manage the research project with Principal Investigator (PI), Collaborator and the research team members to ensure all project deliverables are met.
• Undertake these responsibilities in the project:
  i. To develop simulation models for flexible array ultrasound system
  ii. To develop custom phantoms for experimental studies
  iii. To design and develop non-linear signal processing algorithms including deep learning algorithms for image reconstruction
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements:

• Have relevant competence in the areas of digital electronics, signal processing, machine learning and deep learning.
• Have a B-Engg or B. Tech degree in Electronics, Computer or Biomedical Engineering with undergraduate projects related to the relevant competence mentioned.
• Knowledge of biomedical signal processing will be advantageous.
• Should have proficiency in Matlab or Python.
• Prior experience in publishing is desirable.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Major Challenges

• Integration of flexible arrays with research ultrasound platform
• Design and development of deep learning-based flexible array adaptive image reconstruction pipeline

Salary - ($5,200 - $6,000)

Mon - Fri, 8am - 5:15pm

Job Description:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations

Job Requirements:

• Diploma/ Degree in Mechanical Engineering
• Minimum 2-3 years related work experience
• 2D & 3D CAD operations; strong in CATIA
• Proficient in Microsoft ( Excel / words / powerpoint )
• Good technical design and engineering background would be highly advantageous
• Solid work test will be conducted during interview

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Description

• Reporting to Global Category Microcontroller & Memories (MCM), strive to secure “Best in Class” consistent and sustainable supplier quality performance to reach the Continental Business and Quality targets.
• Maintenance of the defined Supplier Quality Management System (procedures, guidelines, and tools) to ensure the requested quality is in line with the defined supplier management strategies to meet the quality targets.
• Execution of supplier evaluations and assessments to support the cross-functional supplier selection team with the required quality data.
• Driving supplier development & improvement activities at supplier's site.
• Initiation and introduction of the preferred supplier and components strategy.
• Design, initiation, and control of preventive quality management measurements in the design and development phase for supplied parts and services to ensure that our products meet the quality requirements defined.
• Component introduction through robust APQP process which include Component sourcing, writing of specifications, handling of qualifications and risk management.
• Manage change requests (PCN) from component suppliers and assure comprehensive qualification of any change.
• Support of the data system to collect and evaluate supplier quality related key performance indicators (KPIs) for the regular reporting of quality performance.
• Support for the continuous improvement process of all supplier quality-related processes, guidelines, and tools by means of supplier audits, on-site assessments, and benchmarking and best practice sharing programs.

Qualifications

• Degree in Electronics/Electrical Engineering (or related) with minimum 5 years’ experience, preferably in the automotive industry
• Candidates with experience in semiconductor processes (e.g., wafer process technologies, back-end assembly, and testing), knowledge in electronic component & qualification requirements (e.g., AEC-Q, JEDEC, IP qualification) preferred. Candidate with more work experiences may be considered for Principal role.
• Strong experience in quality systems, process audits and part qualification.
• Understanding of automotive practices such as APQP/PPAP/VDA6.3/IATF16949.
• Able to lead suppliers' development and audit activities within Asia.
• Able to work independently and travel frequently (e.g. SE-Asia, China, Japan & S. Korea).
• Strong interpersonal and communication skills e.g. in collaborations, problem solving process, conveying technical details and presentation.