Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

• Work on problems of various scopes where data analysis is required on evaluation of identifiable factors
• Set up and commission new machine installations at customer's site
• Able to troubleshooting/repair/maintenance machine
• Understand customer's requirements and capable of performing data mining and analysis to provide recommendations for improvement
• Work on problems of various scopes where data analysis is required on evaluation of identifiable factors
• If necessary, monitor and follow big customer projects.
• Collaborate closely with the R&D and Application Engineering teams to investigate a challenging issue and implement a solution.

Requirements

• Strong analytical and problem-solving skills, eager to learn and work hard
• Candidates with experience working on water quality or air quality analytical instrument is preferred.
• Comfortable to travel to the East.
• Good interpersonal, negotiation, presentation, and communication skills
• Positive work attitude, self-motivated with ability to work independently or in a team environment
• At least 4 years of experience in troubleshooting of analytical equipment.
• Minimum Degree in Chemical / Environmental or related engineering discipline

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a Electrical and Instrument Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Job Responsibilities of Electrical and Instrument Engineer:

• Review project specs to ensure equipment design meets contract requirements.
• Prepare, review, and approve instrumentation and electrical deliverables (e.g., lists, data sheets, diagrams, schedules).
• Create material requisitions and perform technical bid evaluations for electrical and instrumentation equipment (e.g., transformers, MCCs, flowmeters, control valves).
• Develop engineering standards and procedures for design and production.
• Monitor project costs, timelines, and compliance with technical specifications.
• Attend technical and HAZOP review meetings to address client feedback.
• Support plant start-up, commissioning, troubleshooting, and manual preparation.
• Provide technical support to sales, engineers, and project managers.
• Self-manage daily engineering tasks while adhering to health and safety protocols.

Requirements

• Bachelor’s degree in engineering discipline
• 5 years’ E&I experience in water treatment industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: Manufacturing/ Production (Precision Engineering)
• Position Title: Procurement Engineer
• Working Location: Kaki Bukit
• Working Hours: 5 days (Mon – Fri, 8am – 5.30pm)
• Salary Package: Up to $4,500 + AWS
• Duration: Permanent

Key Responsibilities

• Report to Operations Manager.
• Obtain quotations and purchase raw materials, components, and assign secondary processes to subcontractors.
• Update approved machining subcontractor quotations in the system.
• Issue and manage Work Orders and Purchase Orders.
• Source materials, components, and plating for cost reduction.
• Perform evaluations for company purchases and assist with assigned duties.
• Collaborate with the group sourcing team on procurement evaluations.
• Develop and manage the Supply Chain Management plan.

APPLY NOW!!!

• At least Diploma in Mechanical Engineering with 1 year of related working experience. Preferably from the Manufacturing industry.
• Proficient in Microsoft Office is a must.
• Experience with CRM tools (such as Salesforce) would be beneficial.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71172 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

If you are a Sales professional looking to grow your technical sales know-how, then Emerson has a great opportunity for you! Based in Singapore, the Senior / Sales Engineer will plan, and drive accounts assigned to grow the Valve business in Singapore.

In this Role, Your Responsibilities Will Be:

· Provide sales forecast and achieve/exceed bookings, sales, and profitability targets set for the Business Unit’s business in Singapore.

· Tap on prospects, analyze requirements to develop winning strategies, and negotiate to win the business profitably.

· Maintain excellent accounts and build strong relationships with external customers and the internal sales and service team.

· Collaborate with Inside Sales team for technical support, and generate winning proposals for order processing, project team, and documentation including post-sales service with the Service team and various departments within the organization.

· Proactively promote regulators and pressure safety relief valve products and service solutions by using marketing programs, maximizing field resources.

· Lead and build on internal sales team relationships and bring in Product Sales Specialists to assist in value proposition.

· Understand customer needs to uncover additional opportunities within accounts across all products and service solutions.

· Strong and keen sense of hunting and developing new opportunities/new customers.

Who You Are:

You effectively communicate in various settings: one-on-one, small and large groups, or among diverse styles and position levels. You build rapport in an open, friendly, and accepting way. You draw upon multiple relationships to exchange ideas, resources, and know-how. You understand that different situations call for different approaches. You position views and arguments appropriately to win support.

For This Role, You Will Need:

· Good communication/interpersonal skills and strong negotiation skills.

· Good in analytical, questioning and possess good critical thinking skills coupled with the ability to develop and implement strategies.

· Mature and independent while having strong team spirit with internal stakeholders.

Preferred Qualifications that Set You Apart:

· Degree/Diploma in Engineering (Mechanical, Chemical, Instrumentation, Automation) with 3-5 years of sales experience in marine, oil & gas, petrochemical & chemical industry.

· Proven experience in technical sales, preferably in the valves business would be an added advantage.

Please submit your application on or before 31 December 2024.

Our Offer To You:

By joining Emerson, you will be given the opportunity to make a difference through the work you do.

Emerson's compensation and benefits programs are designed to be competitive within the industry and local labor markets. We also offer a comprehensive medical and insurance coverage to meet the needs of our employees.

We are committed to creating a global workplace that supports diversity, equity and embraces inclusion.

We attract, develop, and retain exceptional people in an inclusive environment, where all employees can reach their greatest potential. We are dedicated to the ongoing development of our employees because we know that it is critical to our success as a global company.

We have established our Remote Work Policy for eligible roles to promote Work-Life Balance through a hybrid work set up where our team members can take advantage of working both from home and at the office.

Safety is paramount to us, and we are relentless in our pursuit to provide a Safe Working Environmentacross our global network and facilities.

Through our benefits, development opportunities, and an inclusive and safe work environment, we aim to create an organization our people are proud to represent.

Our Commitment to Diversity, Equity & Inclusion

At Emerson, we are committed to fostering a culture where every employee is valued and respected for their unique experiences and perspectives. We believe a diverse and inclusive work environment contributes to the rich exchange of ideas and diversity of thoughts, that inspires innovation and brings the best solutions to our customers.

This philosophy is fundamental to living our company’s values and our responsibility to leave the world in a better place. Learn more about our Culture & Values and about Diversity, Equity & Inclusion at Emerson.

If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: [email protected].

Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

· Act as the main technical adviser on a construction site for subcontractors, craftspeople, and operatives & junior Engineers.

· Responsible for checking/advise of plans, drawings, and quantities for accuracy of calculations of area are followed correctly.

· Responsible to ensure that all materials used, and work performed are in accordance with the specifications & budget.

· Responsible for work progress timescales. (In charge area)

· Supervising of project crews.

· Coordination with consultant traffic team for timely submission and obtaining approval of temporary and permanent traffic diversion plan.

· Coordination work with authorities, clients and QP.

· Coordination with LTA term contractors (traffic light and street lighting).

· Ensure safety, health & security of the in-charge area.

· Assist in preparation of Approve-In-Principle (AIP), Preliminary, pre-final and final submission drawings with consultant for LTA, NPARKS, PUB and BCA submissions.

· Attending and preparing minutes for meeting with clients, consultant and technical agencies such as NPARKS, PUB, HDB, URA and etc

· Liaise and coordinate with interfacing contractors on traffic diversion matters.

· Assist in planning and execution of works

· Review method statement for various construction works and traffic diversion and traffic control plan for submission to LTA.

· Take part in briefing with sub-contractors on the technical

· Deal with arborist on site works to meet NPARKS requirement

Qualifications and Education Requirements

· Minimum 10 years of working experience in road alignment design and traffic engineering after tertiary education. Shall be well versed and have experience in LTA’s design standards.

Job Description

• Industry/ Organization Type: Manufacturing/Construction Machinery
• Position Title: Service Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8.15 am – 5.15 pm
• Salary Package: Up to $4,000 + AWS + Meal Allowance + Company Transportation/Transport Allowance + OT
• Duration: Permanent

Key Responsibilities

• Conduct product delivery training for distributors and customers.
• Provide diagnosis guidance and analysis of fault found to Distributor / End-user, remotely via emails and/or calls.
• Carry out field services at sites in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team in locating correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.

APPLY NOW!!!

• Minimum Diploma in Mechanical/Mechatronics Engineering or relevant studies.
• With at least 2 years of relevant working experience in construction machinery industry.
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram.
• Process valid Class 3 Driving License.
• Comfortable with travelling internationally within Asia (Entitled to travelling allowance).

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65794 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Planning, co-ordination and execution of LTA and SMRT projects

To attend all interface and co-ordination meetings with different stakeholders and contractors

Installation, monitoring, supervision, testing and troubleshooting of RTU at site

Preparation of project documents and drawings

Requirements:

Relevant Diploma in Electrical Engineering/Computer Engineering from a recognised Polytechnic

Strong interpersonal skill with a positive attitude

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

· Act as the main technical adviser on a construction site for subcontractors, craftspeople, and operatives & junior Engineers.

· Responsible for checking/advise of plans, drawings, and quantities for accuracy of calculations of area are followed correctly.

· Responsible to ensure that all materials used, and work performed are in accordance with the specifications & budget.

· Responsible for work progress timescales. (In charge area)

· Supervising of project crews.

· Coordination with consultant traffic team for timely submission and obtaining approval of temporary and permanent traffic diversion plan.

· Coordination work with authorities, clients and QP.

· Coordination with LTA term contractors (traffic light and street lighting).

· Ensure safety, health & security of the in-charge area.

· Assist in preparation of Approve-In-Principle (AIP), Preliminary, pre-final and final submission drawings with consultant for LTA, NPARKS, PUB and BCA submissions.

· Attending and preparing minutes for meeting with clients, consultant and technical agencies such as NPARKS, PUB, HDB, URA and etc

· Liaise and coordinate with interfacing contractors on traffic diversion matters.

· Assist in planning and execution of works

· Review method statement for various construction works and traffic diversion and traffic control plan for submission to LTA.

· Take part in briefing with sub-contractors on the technical

· Deal with arborist on site works to meet NPARKS requirement

Qualifications and Education Requirements

· Minimum 10 years of working experience in road alignment design and traffic engineering after tertiary education. Shall be well versed and have experience in LTA’s design standards.

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Assistant Service Engineer/ Service Engineer
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $3800 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair & maintenance of commercial cleaning equipment; e.g. road sweepers, ride-on auto-scrubbers etc.
• Must be able to perform troubleshooting on various electrical circuitry.
• Able to lead a team of technicians to provide excellent service support.
• All other assigned duties.

APPLY NOW!!!

• Minimum Diploma (Electrical Engineering) with expertise in AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Minimum 1 year of experience in customer support and in repairing heavy industrial equipment.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65054 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: QA Engineer / Quality Assurance Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that ISO13485 and FDA 21 CFR Part 820 systems are adequately maintained, and continuous improvements are implemented
• Coordinate with various functions to ensure awareness and understanding of the Quality Management System.
• Plan and coordinate gap analysis exercises and provide advice on bridging the gap
• Manage and oversee quality audits by plan and ensure quality audits findings and recommendations are rectified and implemented
• Apprise management of quality audit findings and corrective actions taken
• Ensure that the procedures and processes prescribed by the Quality Management System are in place and implemented per requirement
• Review the Quality Management System periodically to assess continued suitability and areas of possible improvement
• Arrange for ISO13485, ISO14971 and FDA 21 CFR Part 820 awareness training and further refresher training as needed
• Coordinate and plan work of external audit such as Customer, ISO certification and Regulatory bodies
• Ensure that systems and procedures are in compliance with ISO13485, ISO14971, FDA 21CFR Part 820, and GDP requirements
• Mentor / supervise as assigned and ensure timely and accurate completion of quality projects
• Support Plant wide audit/ inspection activities and special projects, as assigned
• Able to travel for suppliers/customers visits
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Quality Management or Electronics Engineering
• At least 3 years of working experience in Quality Management Systems, and in a manufacturing environment
• Excellent hands-on knowledge of Quality Management Systems primarily in ISO 13485 and FDA 21 CFR Part 820
• Lead, mentor and facilitate problem-solving and quality improvements
• Establish controls system required in ISO13485 & FDA registered facility
• Strong communication and interpersonal skills
• FDA Inspection experience preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65191 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Description

• Industry/ Organization Type: IT / Software
• Position Title: Data Center Engineer
• Working Location: Boon Lay
• Working Hours: 5 days, Mon – Fri (Morning Shift 6 AM – 2 PM / Afternoon Shift 2 PM – 10 PM)
• Salary Package: Basic Salary up to $5,000 + AWS + Bonus
• Duration: Permanent Role

Key Responsibilities

• Perform periodic walk-through, validation of equipment status, amber lights check, etc.
• Review work order requests in the queue and respond to semi-routine work orders by adhering to commitment times.
• Escalate and expedite orders to appropriate teams upon standard operating procedures.
• Rack and stack semi-routine customer equipment tickets.
• Support datacenter standard operating cross-connect work order requests.
• Support standard operating testing and standard operating installations of customer assets.
• Support standard operating procedures of layer 1 cross-connect certification testing.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma / Degree in IT/Computer Science, or related field.
• Minimum 1 year of IT experience or equivalent.
• Prior working experience in a Data Center, Network or Server environment would be an added advantage.
• Must be comfortable with shift rotation.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66104 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Account Manager | Sales Engineer | Up to $5k | 5 Days | Woodlands

• Salary : SGD4,000 - SGD 5,000 + Commission
• Working hours: Monday - Friday 830am to 6pm
  (once a month half Saturday 9am to 12pm)
• Location: Woodlands

Job Responsibilities

• Develop close working relationship with customers championing products.
• Identify niche market segments locally, create market awareness, new product positioning and launch, develop and implement effective marketing programs with the timely support to penetrate, expand and accelerate business growth.
• Understand market trends, competitions, local market culture/customer expectations in order to achieve the organizations’ goals.
• Liaise with management and on various matters – develop jointly common marketing goals/strategies, share marketing information, obtain courses information

Job requirements

• With relevant experience, preferable with Semiconductor industry
• Cert /Nitec / Diploma in engineering background
• Possess own transportation is an added advantage

The Supreme HR Advisory Pte Ltd | 14C7279
Ong Boon Kiet (Travys) | R22104769
Senior Recruitment Consultant

Responsibilities

• Global production service operations support in middleware technologies and platforms.
• Accountable for the overall service reliability, availability and stability of the technical scopes.
• Provide technical expertise for managed workloads, including troubleshooting, analyzing and resolving incidents, problem, service request and change management process.
• Partner with the development, project and business teams to understand requirements and technical specifications to participate in project deliverables activities.
• Drive through culture of continuous improvements for the production environment through automation or manual work and performance hygiene.
• Technical analysis of production platforms to identify and remediate performance issues.
• Work collaboratively in teams and develop meaningful relationships to achieve common goals.
• Operation and further development of middleware platforms and the associated interfaces
• Development of self-service interfaces and their workflows.
• Exercise specialist responsibility in strategic projects and initiatives.

Requirements

• Minimum Bachelors Degree in Computer Science / Information Technology / Computer Engineering or equivalent
• Minimum 4 years of experience in the following technical platforms:Operating Systems: Linux, Unix and/or Windows
  Middleware Technologies: BMC Control-M, Axway CFT/Secure Trasnsport/Sentinel
  Monitoring and Data analytics tools: OMI, ServiceNow, Geneos
  Scripting tools: Java, Unix Shell, Python, PowerShell, perl
• Good understanding of ITIL Service Management framework such as Incident, Problem, and Change processes
• Experience in one or more of the following technical platforms:Kubernetes, Ansible, Elastic Search, Rundeck, GIT
• Ability to work in shifts and support On-call in rotations.
• Excellent communication (written and verbal), interpersonal and logical skills.
• Customer oriented and a strong team player.
• Ability to work in a team and individually.

Advantage if you have the following:

• DevOps tools & framework experience
• BMC Certified Service Professional in Control-M Version 9.
• IBM MQ
• Experience working in the banking / financial institution
• French language proficiency

Next Step

• Prepare your updated resume and expected package.

• Simply click on 'Apply here' or email to [email protected] to drop your resume

• All shortlisted candidates will be contacted.

Tamanna Bilandi

EA Licence No. 91C2918

Personnel Registration No. R2096241.

Responsibilities:

• Deployment via JIRA, Job scheduling via control M, basic knowledge in Jenkins, bitbucket and artifactory, and reporting.
• Ensure all documents and requirements for UAT/Production implementations are complete with correct details and comply with approval process.
• Support UAT/Production deployments for Unix/Linux/Windows platforms using Rocket Aldon LM(e).
• Check in collections to Aldon via Jenkins.
• Investigate and coordinate issues encountered in Jenkins.
• Assist other teams on UAT/Production deployment issues related to Aldon.
• Raise requests using CRQs in remedy/ SmartIT.
• Request deployment setup.
• Review and perform SIT/UAT ECP deployments.

Requirements:

• Bachelor's degree in Computer Science, Information Technology, or a related field.
• Minimum 8+ years’ experience as Release Engineer.
• Knowledge/experience in Aldon LMe including setup, ECP.
• The successful candidate will have experience with source control tools, setting up servers, working with MQ, CI/CD Tools, build tools etc.

• Supports the construction team for all design matters.
• Reviews all technical documentation and drawings of the Project works.
• Works closely with the Consultants on the designs and project deliverables to enhance site efficiency and constructability.
• Understands and familiar with Authority approval/clearance of works including URA, BCA, LTA, PUB, etc.
• Manages design approval process and coordinates with the Clients and Consultants in a timely manner to resolve all technical issues.
• Ensures strict compliance of the design in accordance with contractual requirements.
• Ensures the distribution of all the approved and latest drawings and other relevant documents to the relevant parties.
• Prepares shopdrawings with in-house BIM team and obtains approval in advance to site installation dates.
• Raises queries to Client or handles Client’s clarification on technical requirements pertaining to the Project works.
• Prepares and presents design progress status and slides to KTC management, project team and Client as and when required.
• Strong coordination and collaboration with other disciplines (i.e. Architectural, MEP, BIM, etc.) on design to ensure delivery of high quality outcome.
• Supports tender team and prepares technical tender documents as per specifications for bidding of civil and structural engineering projects as and when assigned.
• Attends Technical Meetings, Coordination Meeting, Site Meetings, etc as and when required.

JOB SCOPE
Responsible for executing the company projects in building construction which covers.

• To review project specifications and technical clarifications
• To prepare method statements and check drawing discrepancies
• To carry out project planning, design, material requisition, cost control, project supervision and documentation
• To supervise the construction works and coordinate with client’s representatives, consultants and sub-contractors on technical matters
• To target and ensure timely and smooth progress of works
• To ensure quality of works is achieved and safety & environmental regulations are complied with
• To ensure project activities complied with the Company’s ISO system

JOB REQUIREMENTS

• Minimum a degree in Civil/Structural Engineering
• Minimum 5 years working experience in building construction
• Use of Autocad would be an advantage
• Proficient in using Microsoft Office and familiar with Microsoft Project
• Good communicative skills, able to interact with people of all levels and teamwork

Responsibilities

• Monitor and review master construction program and preparation of catch-up program, if applicable.
• Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Preparation of detailed method statements and work instructions for construction.
• Coordinates between sub-contractors / vendors / internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Site inspection and QAQC check
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastage of all.
• Adherence to safety practices in the workplace.

Requirements

• Techinical expertise and knowledge in Foundation, Structural and Civil Works
• Proficient in Microsoft Project

• Good hands-on experiences in Tunneling works for MRT Project.
• Site management which includes planning, supervising and coordinating projects.
• Managing all project operational and administration.
• Attending site progresses and meeting with client, Main contrator and others who involved in project.
• Review of design and construction methodology from construction perspective. Monitoring the progress of the project strictly following the permissible time parameter.
• Able to work independently and under pressure.
• Good team player with ability to lead & multi tasking
• Diploma/ Degree in Civil Engineering

Why Join Us?

• Attractive Newcomer Bonus
• Saturday work allowance
• Career Progression & Development Opportunities
• Opportunity to Work Alongside an Innovative Team
• Comprehensive Leave Packages (e.g: additional leave, birthday leave, eldercare leave, marriage leave & gift, etc...)
• Annual Executive Health Screening

Job Responsibilities:

• Assist Project Manager on project matters.
• Coordinate with subcontractors, supervisors and clients on site matters.
• Execute, monitor and ensure the project completed on time.
• Maintain work quality according to specification and requirement.
• Check drawing for accuracy and completeness for construction.
• Maintain inspection records of works, materials and all completed works.
• Implement cost control measures to meet project budget.
• Ensure the site operations comply with project quality plan, environmental and occupational safety and health.
• Ad-hoc duties as assigned by superior(s).

Job Requirements:

• Degree in Civil Engineering or equivalent; certification must be recognized by PE Board
• Has experience in infrastructure projects, e.g. roads and rail projects
• Possess skill, knowledge and ability to supervise and manage project effectively
• Independent, resulted-oriented and self-driven team player with good communication skills

Key Responsibilities:

• Develop and execute sales and marketing strategies for valves and instrumentation measurement products.
• Identify and source new business leads to expand the customer base.
• Build and maintain strong, collaborative relationships with key customers.
• Manage MRO (Maintenance, Repair, and Operations) activities and assigned projects efficiently.
• Promote the company’s capabilities and products to both existing and potential clients.
• Ensure annual sales targets are achieved through effective team leadership and strategic planning.

Requirements:

• Solid knowledge of valves, instrumentation, and measurement systems, including installation, operation, and troubleshooting.
• Established connections within relevant industries in O&G, Marine Offshore industry for accelerated onboarding and business growth.
• Class 3 Driving LIcense is good to have.
• Strong interpersonal and communication skills.
• Ability to develop and maintain long-term customer relationships.
• Target-driven with a proactive and results-oriented approach.
• Knowledge of the local market, particularly in areas like Jurong Island, is highly preferred.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Responsibilities

• Define specifications and scope of work for contractors.
• Oversee the startup, testing, commissioning, and troubleshooting of machines.
• Handle the creation and management of Single Line Diagrams, Control Schematic drawings, and PLC/HMI programming.
• Ensure timely execution of projects.
• Prepare and support the installation team.
• Willing to travel and work on overseas assignments.
• Will be part of the Customer Support team providing assistance for PLC Control Software Solutions
• Resolve and diagnosing of system errors to ensure minimal downtime.

Requirements

• Candidate with relevant working experience in Siemens S7 Classic Programming, Siemens TIA Portal, HMI Development is preferred.
• Degree Electronic/Electrical/ Mechatronic Engineering or related discipline
• At least 5 years of relevant working experience in process industries such as Food Manufacturing, Chemical Manufacturing industries.
• Basic Knowledge of Allen Bradley PLC.
• Control Panel Design Knowledge
• Candidate must be comfortable working in Tuas

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting,

using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

*Entry Level* Quality Assurance Engineer | Java | Whitebox

Working Hours: Monday - Friday (Hybrid)

Working Location: Central

Remuneration Package: Up to $4,000 + AWS + Performance Bonus

Join our team as a Quality Assurance Engineer (Whitebox) where you'll play a critical role in ensuring the quality and reliability of our software products. Collaborate closely with development and project management teams, create comprehensive test plans, execute automated scripts, and track bugs to drive continuous improvement.

Responsibilities:

• Review requirements, specifications, and technical design documents to provide timely and meaningful feedback.
• Develop detailed, comprehensive, and well-structured test plans and test cases.
• Estimate, prioritize, plan, and coordinate testing activities.
• Design, develop, and execute automation scripts using automated testing tools.
• Identify, document, and track bugs thoroughly, ensuring proper resolution and regression testing.
• Monitor debugging process results and track quality assurance metrics such as defect densities and open defect counts.
• Stay updated with new testing tools and test strategies.
• Coordinate with the development and project management teams for smooth System Integration Testing (SIT) and User Acceptance Testing (UAT) processes.

Requirements:

• Bachelor's degree in Computer Science, Engineering, or related field.
• Good to have experience software quality assurance with strong knowledge of QA methodologies, tools, and processes.
• Good to have experience in writing clear, concise, and comprehensive test plans and test cases.
• Familiarity with Agile/Scrum development processes.
• Good to have hands-on experience with both white box and black box testing is a plus.

"By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

Contact you about potential opportunities.

Delete personal data not required at this application stage.

To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Aloysius Tan Sheng Rong - R22110441

ScienTec Consulting Pte Ltd - 11C5781

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a Electrical and Instrument Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Job Responsibilities of Electrical and Instrument Engineer:

• Review project specs to ensure equipment design meets contract requirements.
• Prepare, review, and approve instrumentation and electrical deliverables (e.g., lists, data sheets, diagrams, schedules).
• Create material requisitions and perform technical bid evaluations for electrical and instrumentation equipment (e.g., transformers, MCCs, flowmeters, control valves).
• Develop engineering standards and procedures for design and production.
• Monitor project costs, timelines, and compliance with technical specifications.
• Attend technical and HAZOP review meetings to address client feedback.
• Support plant start-up, commissioning, troubleshooting, and manual preparation.
• Provide technical support to sales, engineers, and project managers.
• Self-manage daily engineering tasks while adhering to health and safety protocols.

Requirements

• Bachelor’s degree in engineering discipline
• 5 years’ E&I experience in water treatment industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Assume a position as a key member of a high-performing team that delivers infrastructure and performance excellence. Your role will be instrumental in shaping the future at one of the world's largest and most influential companies.

As a Lead Infrastructure Engineer at JPMorgan Chase within the Network Rapid Response SME (Subject Matter Expert) Team, your endless curiosity about technology will help you propel innovation and your career. Working in a team of highly motivated people like you, you’ll work with customers and be accountable for production incidents, problems, change management, internal and external communications, lifecycle management and product evolution. You’ll help develop functional goals and priorities that align with our overall strategy. You’ll collaborate with our talented and dedicated problem-solving technologists across the JPMorgan Chase & Co. global network. Your expertise in various network technologies and standards will be counted on to troubleshoot, identify, and solve complex and mission critical problems internally and externally. The ideal candidate must have knowledge of, or be willing to learn, scripting languages (e.g. Python) required for the development of automations that will contribute to the improvement of our network support structure.

Job responsibilities

• Applies strong technical acumen and problem-solving methodologies to network operations of reasonable scope, with a focus on improving network operations, data and systems running at scale, and ensures end to end monitoring of network infrastructure and applications

• Applies technical expertise, problem-solving methodologies, drives a workstream or project consisting of one or more infrastructure engineering technologies

• Works with other platforms to architect and implement changes required to resolve issues and modernize the organization and its technology processes

• Executes creative solutions for the design, development, and technical troubleshooting for problems of moderate complexity

• Strongly considers upstream/downstream data and systems or technical implications and advises on mitigation actions

• Resolves most nuances, determines appropriate escalation path, executes conventional approaches to build or break down technical problems

• Partners with application and infrastructure teams to identify potential capacity risks and govern remediation statuses

• Be accountable for making significant decisions for a project consisting of multiple technologies and applications

• Be primary point of contact to support incident, problem, change management, risk, vendor and client relationship, internal and external communications, service delivery, lifecycle management and service evolution

• Acts independently and leverages critical thinking. Advocates for customer base when faced with Infrastructure or Business Critical issues

• Adds to team culture of diversity, equity, inclusion, and respect

Required qualifications, capabilities, and skills

• Bachelor’s Degree in Computer Science related disciplines

• Minimally 10 years of Infrastructure and networking related experience

• Deep knowledge of one or more areas of infrastructure engineering such as hardware, networking terminology, databases, storage engineering, deployment practices, integration, automation, scaling, resilience, or performance assessments

• Deep knowledge of site reliability engineering or related experience with focus on Networking on Data Center, Enterprise, Perimeter, Routing & Switching, Security and Application layer networking. Certification of CCIE or CCNP.

• Deep knowledge of one specific infrastructure technology and scripting languages (e.g., Scripting, Python, Ansible etc.)

• Drives to continue to develop technical and cross-functional knowledge outside of the product

• Deep knowledge of cloud infrastructure and multiple cloud technologies with the ability to operate in and migrate across public and private clouds.

• Ability to apply proficiency, articulate and share clear, concise complex technical findings to management in understandable terms.

• Drives to develop infrastructure engineering knowledge of additional domains, data fluency, and automation knowledge.

Preferred qualifications, capabilities, and skills

• Certification in automation is an advantage

To apply for this position, please use the following URL:

https://ars2.equest.com/?response_id=67d0170ebc263343f0960d9cd90f1778