Job Responsibilities

• Responsible for the design and development of CMOS and SOI analog Integrated circuit designs for mobile handset applications.
• The candidate will work within a group of analog/RF IC design experts and be assigned to a multi-chip module product team with typically 3 to 5 design engineers.
• The candidate will interface with design management and module design teams to create the detailed specification, report design progress, and to collect, track, and resolve any performance and circuit design issues.

Job Requirements

• Possess a BS degree (MS is preferred) and 2 years of experience in analog IC design.
• Demonstrate experience in analog or RF IC design at the chip level.
• Have understanding of the basic device physics with the ability to develop and use advanced linear and non linear models or simulation techniques
• Able to translate between the model, simulation, physical implementation, and the measured performance of a device.
• This job also requires experience in simulation tools, analog circuit test characterization techniques and equipment.
• Proven track record in using Cadence or similar analog IC design tools and hands-on experience with lab measurements and characterization equipment.

Our Company (Tigris) is a Singapore-based project development company, focusing on Environmental and Sustainability Projects, such as water/wastewater/waste treatment, energy optimization and efficiency systems, distributed renewable energy, etc.

Tigris is active in India, the Philippines, Indonesia and Singapore. Tigris works with environmental engineering firms in these countries to develop, finance, operate and maintain Environmental and Sustainability solutions to customers, including commercial, industrial and residential end-users.

www.tigris.com.sg

Job Description:

Primary Role: Responsible for techno-engineering work during the project cycle, from evaluation, implementation through to operations / maintenance, including:

• Pre-investment technical due diligence, such as review of engineering and process design, comparing capex/opex estimates to industry benchmarks, technical capabilities of EPC contractors, etc
• Supervision during implementation, such as:
  • Verify whether project-related EPC and investment agreements are being met.
  • Physical status of the work implemented on site.
  • Judge and report the quantum of finance contributed and used for the project.
  • Estimated expenditure for the project over observed progress.
  • Review and comment of Statutory Approvals and Clearances.
  • To check whether physical progress is in line with project implementation schedule and planned project timelines.
  • Review the drawdown schedule for the planned project activity.
• Oversee operations and maintenance of project investments, to ensure O&M contractors are performing their roles, and projects are being managed in line with budgets and contracts

Secondary Role: Support Business Development / Commercial / Investment work, i.e. identify and contact potential environmental projects which Tigris can invest in, including in India, Philippines, Indonesia, Singapore, and over time, to work with local partner companies on project development and business strategy.

Skills

Candidates should have the following:

• 5 to 10+ years of relevant work experience gained (e.g. in a Water, Engineering/Construction, or Consulting Company)
• Proven ability for critical / logical thinking and problem solving
• Strong co-ordinator & team player
• Self-motivated, well-organized and can-do attitude
• Strong communication skills. Ability to work very independently in a small team
• Evidence of high performance standards in previous position(s)

On job training to be provided

• Study and analyse utilization of the network capacity resources, plan and implement changes to optimise and expand the network.
• Generate monthly reports via digital inventory to monitor network utilization, analyse trends and provide suggestions for improvement.
• Ensure all inventory assets, utilization, circuit routings are updated in the digital inventory in a timely manner.
• Streamlined process for inventory control, to achieve leaner and efficient operations.
• Document network design, configurations topology diagrams for ongoing processes, references and training purposes.
• Collaborate with various internal stakeholders such as AM, CS, PM for capacity request and new sales order.
• To work with external parties including bilaterial partners and vendors.
• Perform Ad-hoc restoration during outage, plan restoration using existing available capacity within specific SLA.
• Manage different projects, monitor timeline and resources to ensure project delivery within specific timelines.
• To remain on standby via call during assigned week to support Operations and respond to urgent request and outages for circuit restoration.
• Go on site for assigned activities to work with vendors for system planning and implementation and migration activities.
• Perform all other duties and responsibilities as assigned by supervisor.

Skills for Success:

• Nitec / Diploma in Engineering/Telecommunications or in relevant field.
• Goal-oriented with good analytical skills to solve problem. Candidate must be committed and driven to deliver projects assigned on time.
• Able to work independently with minimum supervision.
• Experience in telecom environment with focus on transport network, optical transmission and ethernet technologies.
• Good understanding of transport network architectures including OTN and Ethernet, DWDM.
• Good technical skill set with knowledge of L2 and L3 networking and strong understanding of TCP/IP, IP addressing, and routing protocols.
• Experience with networking hardware from major vendors.

Overall Job Purpose

To independently determine and draft the Requisitions for packages of mechanical components and / or equipment that are required in a project, assists in evaluating the technical aspects of bids and executing in order to deliver the packages on time and to ensure that the packages meet the technical requirements.

Core Responsibilities

• Understands the specifications and requirements in the area of mechanical components and equipment (such as compressors, heat exchangers, pressure vessels, pumps etc.) of the assigned project.
• Independently develops technical specifications and attachments that are part of Requisitions.
• Independently evaluates the technical and engineering aspects as well as issues related to components delivery of bids received from suppliers and gives assessment to the Senior Engineer.
• Generally, Senior Engineers are assigned complex packages and / or medium risk equipment
• Upon award to the successful tenderers, executes the orders for complex and / or medium risk packages by ensuring that documents (such as data sheets, drawings etc.) provided by the suppliers are complete, accurate and in order.
• An example is the specifications and information related to the interfacing between the mechanical component and other components.
• Being the focal point in respect of those packages handled, liaises and coordinates with various internal stakeholders, other discipline engineers, quality team, Engineering contractors and suppliers, ensuring that their needs are met timely and according to the specifications.
• Periodically visits suppliers, checks and tests the packages and their components to ensure that they function as per specifications. Occasionally, has to work with the suppliers to rectify the components making sure that they comply with the specifications and are ready on time
• Provides technical/engineering support and advice to Construction/Commissioning work at site, trouble shoots and follows up with suppliers to rectify the defects or problems.
• Resolves technical issues independently that may arise during the execution of packages handled using expert knowledge and technical know-how, and takes part in HAZOP workshop related to the assigned package and ensures recommendations are incorporated in the completed package with appropriate HAZOP close out.
• Is responsible for capturing lessons learned in his/her functional area, entering in MIMS, and closing out project related MIMS actions.

Qualifications & Experience

• Bachelor in Mechanical Engineering
• 12 years or more of relevant working experience in Mechanical engineering in oil and gas sector.
• Is aware of

1. Applicable industry standards, Company standards, specifications and procedures for his functional area;
2. Expert knowledge in the application of mechanical components such as pressure vessels, heat exchangers, pumps, compressors, Generators etc and market practices in the oil and gas sector.

Brunel International S.E.A Pte. Ltd

UEN No: 199603098R

EA License No: 16S8067

Shinu Alexander: R1657042

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

ABOUT MONEYTHOR

Moneythor is an award-winning software company founded in 2013. We provide banks and fintech firms with a modern toolkit to enhance their digital banking services with the prime focus of generating data-driven personalised and contextual recommendations for their customers.

Since inception, Moneythor has set a mission for itself to make digital financial services more relevant, more personal and to wipe out the myth that you cannot get great financial insights when you visit your financial institution online.

Moneythor is headquartered in Singapore and with presence in Dubai, London, Paris, Sydney, Tokyo, and further expansion in progress. Our solution is currently used by financial institutions globally.

Overview:

Are you a driven professional with strong technical capabilities and storytelling skills who is looking to excel in enterprise sales? Do you believe that a great Pre-Sales Engineer can significantly enhance the sales process and drive better outcomes for our clients? If yes, then we want to hear from you!

Moneythor is currently seeking a talented Pre-Sales Engineer to join our Singapore-based team. In this role, you'll collaborate closely with Account Executives to navigate strategic deals through complex sales cycles. You'll shine in solution selling, financial modelling, delivering impactful presentations and product demos, managing technical & functional aspects of RFP/RFI responses, conveying client requirements to R&D teams, and gathering competitive intelligence. Your contributions will play a vital role in driving new customer acquisition, enhancing customer satisfaction, and lifting overall sales team performance.

This role is based out of our Singapore HQ, where we work in a hybrid (onsite and remote) model.

Role Summary:

As a Pre-Sales Engineer, your responsibilities include understanding client needs, designing robust scalable solutions, and delivering compelling proposals. You'll need a solid grasp of enterprise software and cloud technologies, effective communication skills, and the ability to collaborate with both technical and non-technical stakeholders. Your role involves presenting to diverse audiences, from lower-level influencers to high-level decision-makers, adjusting technical depth to suit each audience's needs.

Key Responsibilities:

• Provide pre-sales technical expertise through product presentations, demonstrations, and ongoing consultation.
• Drive adoption of our solutions within strategic accounts, translating technical features into value drivers.
• Develop and deliver materials to improve product knowledge among the sales teams and partners. Maintain up-to-date knowledge about our solution and competitor landscape to help craft effective sales strategies.
• Act as a reference point during pre-sales activities, showcasing in-depth technical & functional knowledge of our solutions.
• Respond to product inquiries and liaise with the solution & engineering teams as required.

Additional Role Breakdown:

1) Product Pre-Sales Consulting:

• Provide technical & functional direction and consulting to prospects and/or partners as part of the pre-sales process.
• Apply standardized approaches to contribute to commercial proposals.
• Maintain a broad understanding of the market to identify additional opportunities.

2) Product Demonstrations:

• Ensure out-of-the-box demonstration environments are available and tailored to client needs.
• Establish demo datasets and scripts for efficient responses to client inquiries.
• Innovate by creating advanced demonstration sets tailored to unique client requirements.

3) Product Innovation and Continued Expertise:

• Develop a learning path to deepen expertise in solution functionalities.
• Contribute to innovation efforts by understanding market trends and competition.
• Act as a liaison between sales and product teams for continual product improvement.

4) Product Bid Response Efforts:

• Lead RFP/RFI response efforts, collaborating on technical & functional responses and commercial proposals.
• Provide recommendations for proposal improvements and bid management strategies.
• Attend sales debriefs to provide feedback on the sales cycle and client engagement.

Requirements:

• 4+ years of solution engineering or pre-sales experience in SaaS/enterprise software sales.
• Proficiency in server-side technologies, data management as well as HTML, CSS, JavaScript, and SQL.
• Strong understanding of SaaS/enterprise software technical aspects, including integration, security and scalability.
• Excellent written and verbal communication and presentation skills in English, with the ability to engage effectively with various levels of internal and external stakeholders.
• Willingness to travel (<25%).

• Attend site walk and prepare quotation
• Budget calculation and inquiry quotation from sub-contractor and supplier like material
• Tender documents preparation
• Biding proposal preparation and present
• Client relationship maintenance and marketing analysis
• And other ad-hoc duties as assigned

Job Requirement

• 3 years of experience as Sales Engineer or similar technical Sales role
• Preferably knowledge in semiconductor industry
• Pay attention to detail and a high degree of confidentiality
• Proficiency in Microsoft Office, especially Excel
• Good written and verbal communication skills
• Bilingual (English & Mandarin), able to read & write due to the document from HQ (Taiwan) is in Mandarin
• Candidate will be based at office (Ark@Gambas)

Our client is a distributor of automotive and industrial solutions.

• Manage and configure infrastructure systems and applications, network devices, desktops, mobile devices, and remote devices.
• Ensure automatic system backups, successful execution of recovery and disaster recovery plans, application of patches, and closely monitor system resource usage.
• Collaborate with external vendors to ensure compliance with Service Level Agreements (SLA).
• Research and source products, solutions, and vendors for ongoing projects.

Requirements:

• Diploma in Computer Science/Information Technology or equivalent.
• At least 2 years of relevant working experience.
• Skilled in enterprise networking, with expertise in WAN, LAN, and VPN optimization, implementation, and support.
• Knowledgeable about Alcatel PABX, FortiGate devices, Cisco Systems, and Unifi Wireless AP Controllers.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND products.
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing CVD/PVD teams on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise R&D Films peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise R&D to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough solutions.

Requirements

• Master degree or higher in Materials Science, Chemical/Microelectronic Engineering, or Physics with minimum 2 years hands-on experience in leading edge film deposition/CVD deposition/implant technology work.
• A deep understanding of chemical kinetics, thermodynamics, physical phenomena and their direct application to CVD/PVD deposition in various deposition methods.
• An ability to understand and troubleshoot precursor depletion effects within three dimensional structures and come up with innovative ideas to mitigate the effects.
• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise R&D for 4-6 months at a stretch to work on technology development.

• Excellent communication skills

• Interpersonal skills, active listening

• 1 year previous Service desk or equivalent experience

• Attend to Phone, Email and any other online queries where applicable

• Excellent organisational skills

• Managing incidents including business expectations and communication

• Strong knowledge of Microsoft based operating systems, MS Outlook and MS Office

• ITIL Knowledge will be a plus

• Comply to process and procedures

• Administrative tasks

Must have Talent / Skills

• Minimum a diploma in Information Technology or equivalent

• Minimum 1 year of relevant working and technical IT experience

• Pleasant disposition and good social etiquette with good spoken and written English

• Good telephony and problem solving / troubleshooting skills

• Good customer service attitude

• Process Driven

• Able to liaise with Customer for daily operations

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description

• Prepare and submit MSRA prior to the commencement of work
• Liaise with SO team to clear off inspection.
• Lead the site supervisor in clearing off site inspection, and to check and ensure that the work is carried out safely as per drawing, and is of good quality.
• Coordinate with subcontractor to resolve the issues and to ensure that the work is carried out as per approved MSRA & design, and to meet the schedules.
• Check and ensure all the temporary work is carried out as per PE design.

Requirements

• Degree in Civil, Mechanical or Electrical, or a related field.
• Min 2 to 3 Years Relevant Work Experience (MEICA)
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a EQUIPMENT ENGINEER to be paart of our ETCH DEPARTMENTdiverse team of talent. You will be responsible for equipment preventive maintenance and equipment performance indices.

What you will be working on:

• Establish systems/guidance in sustaining and improving all equipment performance indices to meet operations goals.
• Perform shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production when requested.
• Perform scheduled equipment preventive maintenance (PM), calibration and troubleshoot equipment-related problems on a timely basis to minimize equipment downtime.
• Conduct installation and hook-up of new equipment.
• Perform task with zero error.
• Establish work procedures, corrective actions and preventions
• Oversee the preparation of consumables/preventive maintenance parts to ensure adequate provision.
• Participate in continuous improvement programs to improve productivity and output quality of the Module, and constantly monitor and feedback to the team to improve performance of equipment to meet Module objectives.
• Assist in implementing and managing process improvement projects.
• Ensure good housekeeping and safety practices in the Fab.
• Safe custody of tools, equipment and other properties belonging to the Module.
• Initiate, organize, develop and lead task-force for short term problem solving and long term continuous improvement.

More About You:

• Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics or equivalent
• 2-5 years semiconductor wafer fab experience as an Equipment Engineer
• Engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Familiar with TEL Unity DRM/ ME+ Platform and Dry Strippers
• Good Team Player
• Good Analytical & Problem-Solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities:-

• Assist Project Manager in all on-site technical/ engineering matters and authority submissions.
• Responsible for designing and detailing of Civil and Structural Engineering works to ensuring that the Structure sections of the works are constructed in accordance with the contract requirements
• Responsible for timely submission of reports and completion of projects for tender/submission with target dates
• Planning of micro scheduling with other trades/disciplines against Master program
• To update structural/architectural/M&E progress with scheduling tools.
• Manage projects to meet the time, cost and quality objectives
• Liaise with consultants, contractors and authorities from inception to completion of projects
• Supervise the structural works of sub-contractors and work closely with site operations staff to meet the project schedule.
• Coordinate and monitor work progress at site including periodical site
• Responsible for all inspection activities and attending meetings during course of construction of projects being carried out
• Monitor site safety and liaise with the Safety Engineer

Requirements:

• Degree in Civil or Structural Engineering recognized by PE Board/ BCA
• 4-5 years HDB experience in Building Engineering main-con companies
• Experience with Precast/PPVC/MET projects will be a plus
• Proficient in MS Office, AutoCAD, and BIM
• Able to work independently and a team player
• Good analytical, supervision, and communication skills

Responsible for planning and monitoring schedule for all projects.

Work closely with drafters and peform quality check of all drawings before production on site.

Prepare precast profile drawing to comply the authorities requirment and standards.

Liaise with Project teams, auhorities, client, architects and various contractors to ensure project work is carried out smoothly Conduct site inspection and coordination on site

Requires hands on design with detailed experience in 3-D environment, Experience in structural detailing seamless from 3-D mathematical design analysis to 3-D reinforcement detailing with the aid of Telka TSD and TS models etc.

Keen in 3-D modelling designs by using Tekla software.

S2T is an innovative Tech company that develops cutting edge cyber-intelligence solutions for Government and Enterprise Customers.

We're looking for a talented and passionate Javascript Software Engineer (Full Stack) who are looking for their next challenge to help us bring our vision to life!

You'll be responsible for:

• Design, develop, and maintain scalable web applications with an emphasis on both front-end and back-end development using JavaScript technologies.
• Write clean, modular, and efficient code across the stack (front-end: React, TypeScript; back-end: Node.js, Express, etc.).
• Able to perform query, create API to backend databases such as MongoDB, PostgreSQL, MySQL, Neo4J or Elasticsearch.
• Develop RESTful APIs and microservices to integrate front-end elements with server-side logic.
• Experience with cloud platforms (AWS, Azure, Google Cloud) and containerization (Docker, Kubernetes).
• Familiarity with CI/CD pipelines and DevOps practices.
• Work closely with the product team to design and implement user-centric UI/UX and ensure responsive designs.
• Perform debugging, troubleshooting, and optimizing existing applications for better performance.
• Participate in code reviews to ensure quality. Ensure that security, reliability, and scalability best practices are implemented.
• Write and maintain documentation for software development, processes, and API usage.

The ideal candidate would be:

Have a growth mindset where challenges aren't roadblocks but stepping stones to success, where failures aren't setbacks but opportunities for growth. And it's the key to unlocking your full potential!

• A degree in Computer Science from a recognized foreign or local university; a relevant master’s degree will be an added qualification.
• Minimum 3 years of relevant work experience in building real-world services and applications.
• Self-motivated and able to work well in a fast-paced environment.
• We want people who can help us continually evolve our stack.
• Great communication and coordination skills
• Excellent analytical thinking and problem-solving skills

Interested parties, please send your resume with current & expected salary & date available to [email protected] .

We regret only shortlisted applicants will be notified.

A building construction project engineer is responsible for overseeing and managing construction projects, ensuring they are completed on time, within budget, and according to specifications. Their duties typically include coordinating with architects, contractors, and subcontractors, managing project schedules, ensuring compliance with safety regulations, and addressing any issues that arise during the construction process.

Key Responsibilities:

• Design and develop electrical systems, components, and wiring diagrams.
• Design and oversee the electronics hardware design activities of the whole product.
• Select electrical/electronics components for new product development, and replacement for existing products as well.
• Conduct electrical testing and troubleshoot systems to ensure functionality.
• Collaborate with cross-functional teams (e.g., mechanical) on product development.
• Liaise with supplier and operation for design improvement.
• Provide technical support of products introduced into both the domestic and international markets.
• Work closely with a multidisciplinary team to drive cost optimization, manufacturability, quality and reliability.
• Provide technical support during installation, commissioning, and maintenance of systems.

Requirements:

• Bachelor’s degree in electrical engineering or related field.
• Proficient in electrical design software tools
• Strong knowledge of electrical systems, power distribution, control systems, and circuit design.
• Strong problem-solving skills and attention to detail.
• Hands-on experience with hardware testing, troubleshooting, and equipment commissioning.
• Experience in microcontroller platform hardware design is a plus
• Knowledge of HVAC systems is a plus.

Job Description

Requirements:

• Bachelor's or Master's degree in Computer Science, Engineering, or a related field.
• Proven experience as a Big Data Engineer or similar role.
• Strong proficiency in Apache Spark and Scala programming.
• Experience with big data technologies such as Hadoop, Hive, Kafka, etc.
• Familiarity with data warehousing concepts and tools.
• Knowledge of SQL and NoSQL databases.
• Excellent problem-solving skills and attention to detail.
• Strong communication and collaboration skills.

Preferred Qualifications:

• Experience with cloud platforms like AWS, Azure, or Google Cloud.
• Knowledge of machine learning frameworks and libraries.
• Experience with containerization and orchestration tools like Docker and Kubernetes.

EA Number: 11C4879

Key Responsibilities:

• Oversee and manage the day-to-day operations of low-voltage (LV) electrical installation projects, coordinating with contractors, suppliers, and on-site teams to ensure smooth execution of work.
• Conduct regular site inspections to monitor progress and ensure compliance with project plans, safety regulations, and quality standards.
• Review and interpret electrical schematics, layout drawings, and technical documents, while using AutoCAD software to create, update, and revise electrical drawings as required. Provide technical guidance and troubleshooting support for on-site electrical installations.
• Prepare work schedules, allocate resources to meet project timelines, and maintain accurate records of site activities, materials usage, and project milestones.
• Report progress and address any issues to project managers and stakeholders promptly.
• Ensure that all electrical installations meet regulatory and safety standards.
• Conduct regular safety briefings and enforce adherence to safety protocols on-site.
• Act as a point of contact between the project team and site personnel, effectively communicating with clients, consultants, and stakeholders to ensure mutual understanding and alignment on project goals.

Requirements:

• Diploma/Degree in Electrical Engineering or a related field.
• At least 2-3 years local LV (low voltage) electrical installation projects background.
• Proficiency in AutoCAD for electrical drawings is essential.
• Familiarity with local electrical codes, standards, and regulations.
• Strong organizational and problem-solving skills.
• Fluency in Chinese (spoken and written) is preferred to communicate with Chinese-speaking site personnel.
• Ability to work independently and as part of a team in a fast-paced environment.

Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Stay updated with the latest industry trends and technologies to continuously improve control
  system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• Minimum 3 years of experience in designing and implementing control systems for electrical machines.
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

Please include the following information in your resume.

• Current & Expected Salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only short-listed candidates will be notified.

EA License | 18C9251 WGT Group

Registration No | R22111484 Ketty Lim

The Electrical Engineer will be responsible for the detailed design, programming, and maintenance of electrical systems and controls. Key responsibilities include designing and sizing electrical components, programming PLC/HMI systems, and preparing technical documentation.

Responsibilities:

• Carry out detailed electrical design, including sizing and drawing preparation.
• Develop technical documents, including P&ID (Piping & Instrumentation Diagrams), I/O wiring diagrams, and technical data sheets.
• Program and configure PLC/HMI systems to meet project specifications.
• Perform electrical calculations and select components for ATEX environments, ensuring compliance with industry standards.
• Prepare pre-procurement documents and conduct technical evaluations of quotations.
• Provide engineering support for international projects, including troubleshooting and technical assistance.
• Assist in developing project schedules, creating work procedures and method statements, and preparing monthly progress reports.
• Understand hazardous area classifications and select appropriate instruments for hazardous zones (e.g., EX-d, EX-i certifications).

Requirements:

• Minimum Diploma in Electrical Engineering or Mechatronics.
• At least 5 years of hands-on experience in electrical design and programming.
• Proficiency in PLC/HMI programming, electrical calculations, and knowledge of ATEX standards.

Please include the following information in your resume.

• Current & Expected Salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only short-listed candidates will be notified.

EA License | 18C9251 WGT Group

Registration No | R22111484 Ketty Lim

Purpose:

To independently handle sustainability deliverables, manage various scope of works defined by corporate or project team effectively and efficiently according to the specified technical requirements, timelines and budget; assist lead engineer or manager in research and development task and resolve any arising issues during sustainability implementations.

Responsibilities:

• Coordinates with different disciplines to collect the Lessons Learnt and Life Cycle value improvement ideas, to sort out into different categories and to update/improve design standards.
• Proposes, conducts, and participates studies of new technology related to Company business, such as CO2 emission calculation and reduction, decarbonatization, Ammonia and so on.
• Assists his/her seniors in strategy planning for new products of Company business, i.e., offshore wind farm, H2 energy, Ammonia energy, carbon capture system (CCS) and so on.
• Coordinates the specialists from Core Team (Technical expert group) to solve the critical issues arising from EPC projects or offshore fleets.
• With sufficient experience accumulated, may assumes role of R&D lead of the assigned initiatives, and monitor the progress for research topics from both Company entities and external collaborators (universities, research institutes and consultants etc.).
• Independently communicates with all stakeholders, i.e., consultant, classification body, clients, internal engineering disciplines and implements the sustainability program as required by client specification or classification notation (ABS SUSTAIN and DNV ABATE etc.).
• Provides technical advice pertaining sustainability related topic during project bidding / FEED, EPCI and operational stage.

Requirements:

• Bachelor’s degree in civil/structural/mechanical/ship building/environmental/chemical/Electrical engineering/computer science etc. or above. Alternatively, Diploma in Engineering with relevant years of working experience.
• Minimum 7 years of relevant working experience in engineering in oil and gas sector or shipyard industries for bachelor’s degree holder, Minimum 5-year relevant experience for master’s degree holder, or minimum 3-years relevant experience for PhD degree holder or 12 or more years of relevant working experience for diploma holders.

R1552011

Peak Ocean EA License No. 18C9336

Overall Job Purpose

The AVEVA NET is responsible for configuring, implementing, and maintaining project-specific AVEVA Net/AIM and ISM systems. This role ensures efficient data capture, verification, and seamless handover processes, aligning with project requirements and corporate objectives.

Core Responsibilities

System Administration

1. Act as the single point of contact for setting up, maintaining, administering, upgrading, and troubleshooting AVEVA NET systems across all projects.
2. Configure and maintain AVEVA NET portals, including gateway configurations and ongoing updates.
3. Establish and manage Class Libraries, defining structures and mapping techniques in ISM.

Project Support

1. Coordinate with engineering disciplines, project management, procurement, HSE, QA/QC, operations, and construction teams to ensure project milestones are met.
2. Develop data capture, validation, loading, and handover workflows to meet project schedules and client requirements.
3. Generate Query Forms, SSRS, and BI reports to identify data discrepancies, omissions, and completion trends.
4. Create project portals that reflect client-defined class libraries, data structures, and handover requirements.

Training & Process Improvement

1. Train users on AVEVA NET applications, developing clear work instructions and guidance materials.
2. Promote a data-centric culture through effective portal deployment and information management advocacy.
3. Contribute to the continuous improvement of work methodologies and procedures.

Problem-Solving & Communication

1. Anticipate potential issues and implement preventive measures to ensure system reliability.
2. Interface with all project disciplines to clarify and explain AVEVA NET intent, suggesting alternatives when necessary.
3. Resolve open issues amicably and support the Product Manager in delivering AVEVA NET solutions.

Work Relationships

• Reports to the EDS Section Lead, receiving corporate guidance and support.
• Collaborates closely with AVEVA application engineers, E3D administrators, and the Information Management (IM) team.
• Coordinates with AVEVA Support Center to diagnose issues and implement fixes.
• Interfaces with pre-ops, operations, and client representatives as required.
• Develops strong relationships with client technical personnel, encouraging feedback and fostering collaboration.

Education & Certification

• Training and certification in AVEVA NET administration.

Experience

• At least 5 years of experience with AVEVA NET in onshore/offshore Oil & Gas projects or FPSO operations.
• Proficiency in AVEVA NET/AIM, AVEVA ISM, and associated gateway administration and implementation.
• Expertise in mapping company data structures to client requirements and managing FEED and Detailed Design deliverables.
• Prior experience in engineering information management for major capital projects.
• Experience with AVEVA Net Portal and ISM development and administration.

Technical Skills

• Strong knowledge of AVEVA registers, gateways, and their interfaces with client systems.
• Familiarity with Engineering Design software, including AVEVA E3D and AVEVA Engineering (preferred).
• Proficiency in MS Office, Power BI, and programming languages like Aveva PML and .NET.

Software Proficiency

• Software: AVEVA NET, AIM, ISM, MS Office, Power BI, Aveva PML, .NET.

Interested applicants are welcome to submit your MS Word resume to:

[email protected]

EA Personnel: R1109773

EA Licence: 07C3676

Accel Analytics Pte Ltd is a solution provider for analytical and measurement instrumentation products. We are looking for a Technical/Service Engineer to join our Technical Team.

Roles & Responsibilities:

- Provide comprehensive after-sales support, including installation & commissioning.

- Perform maintenance and troubleshooting of gas detectors, gas analyzers & liquid analyzers.

- Offer technical consultation to customers, addressing their inquiries and providing expert guidance.

- Efficiently troubleshoot and resolve problems within specified timelines, ensuring customer satisfaction.

- Prepare accurate and detailed service reports to document work performed.

Requirements:

Minimum ITE/Diploma in relevant field

- Fresh candidates without experience and willing to learn may apply.

- Relevant training and guidance will be provided.

- Independent, responsible and willingness to learn personality.

- Class 3 driving license will be an added advantage. (Transport may be provided upon confirmation of employment)

- Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv to [email protected] along your current and requested salary.

We regret that only shortlisted candidate will be notified.