Physical Design Engineer

Experience : 5+ Years

Salary Range :SGD 7000-10000

Skills & Technical Expertise Required:

Netlist to GDSII at block level, Subsystem Level and at Full chip.

Worked on multiple tapeouts on Netlist to GDSII

Hierarchical partitioning and budgeting of block-level subsystems.

Implementation of high performance (HP) cores, low power designs

Node experience upto 3nm,7nm, 10nm, 14nm, 28nm.

Timing Signoff in loop through STA and ECO cycle at block and at interface.

Block level floor planning, power planning and IR drop analysis.

Scan chain reordering / Scan Chain repartitioning

CTS expertise and clock tree constraints creation for meeting specifications

MMMC optimization at Block and Sub-System Level

Timing closure with Crosstalk and AOCV / POCV

TCL scripting to fundamentally understand tool usage.

Mandatory EDA Skills

PnR tools such as Synopsys ICC/ICC2 and/or Cadence Innovus

Job Responsibilities:

• Design, implement and administer security infrastructure and measures to protect against potential threats
• Test and evaluate security products and solutions
• Monitor and investigate systems and infrastructure activities for signs of unauthorized access or malicious activities
• Lead or participate in internal and external security audits and risk assessments to identify vulnerabilities in existing systems, develop and implement remediation plan for closure
• Review the technical design and facilitate onboarding process for new systems to ensure security compliance
• Develop security policies and procedures and manage compliance
• Create incident response plans; lead and manage incident response
• Promote security awareness and conduct routine social engineering tests for end users

Job Requirements:

• Bachelor’s degree or diploma in Computer Science, Information Technology, Cybersecurity, or a related field.
• 4-7 years of experience in IT or cybersecurity roles.
• Fundamental knowledge on IP networking (e.g. TCP/IP, routing, etc.) and Firewalls (e.g. FortiGate).
• Strong analytical and problem-solving skills.
• EPP/EDR product certification such as Trellix ePO, Symantec Endpoint Protection is an advantage.
• Experience in implementing security products such as SIEM, NIPS, EDR System is an advantage.
• Security Certifications such as GISA, GSEC, CISSP, CISM is an advantage.
• Proficiency in network security and encryption technologies.
• Knowledge of security frameworks and industry best practices (ISO 27001, NIST Cybersecurity Framework, and PCI DSS).
• Experience with vulnerability assessment and penetration testing.
• Strong understanding of secure coding practices.
• Expertise in configuring and managing firewalls, intrusion detection systems, and other security devices.
• Effective communication and collaboration skills to work with cross-functional teams.

The MRS ML Infra team will be focusing on ML Infra performance and efficiency for both large scale AI training and inference workflows in the recommendation domain.

In this role, the engineer works on optimizing the e2e stack for model training and inference for large scale recommendation models. The opportunities are from distributed systems, to model/system co-design, to GPU system optimizations.

We are looking for someone who has previous experiences on high performance infrastructure and performance optimization. We need the candidate to not only identify and lead the execution for short/mid term opportunities for perf/efficiency optimization, but also drive long term strategies on things like model/system co-design, performance automation, etc.

RESPONSIBILITIES

• Hands on driving performance and efficiency optimizations by identifying and delivering the large optimizations across MRS models and systems.
• Drive XFN collaborations and alignments with multiple partner or product ML teams.
• Lead technical directions and roadmap for the SGP perf and efficiency team.
• Providing mentorship and guidance to grow junior engineers on the team

MINIMUM QUALIFICATIONS

• BS/MS in Electrical Engineering, Computer Science or a related field or equivalent experience.
• 7+ years of experience on AI Infra or System performance.
• Hands on experiences on deep system performance optimization, for example, distributed systems, or high performance GPU/GPU systems, or memory/cache optimizations.
• Strong written and verbal communication skills to align XFN and driving team execution
• Previous experiences on mentoring and growing junior engineers as either a tech lead or a manager.
• Strong debugging skills in complex systems that are across multiple components or sub-systems.

PREFERRED QUALIFICATIONS

• Hands on experiences on large scale AI infra system (for example, GPU training system)
• Experiences on large models training and inference such as LLM or recommendation models.
• Experiences in high performance computing including communication optimization, CUDA kernel optimization, distributed training and inference, etc.

Meta builds technologies that help people connect, find communities, and grow businesses. When Facebook launched in 2004, it changed the way people connect. Apps like Messenger, Instagram and WhatsApp further empowered billions around the world. Now, Meta is moving beyond 2D screens toward immersive experiences like augmented and virtual reality to help build the next evolution in social technology. People who choose to build their careers by building with us at Meta help shape a future that will take us beyond what digital connection makes possible today—beyond the constraints of screens, the limits of distance, and even the rules of physics.

About EPAM :

EPAM is a leading global provider of digital platform engineering and development services. EPAM has been expanding in Singapore since 2013 and delivering the best solutions to our customers. As a recognized leader, EPAM Singapore achieved Great Place to Work® Certification in 2023 and is committed to providing our team with inspiring careers. You will have the opportunity to work with fellow talented technologists and accelerate your career by participating in our numerous upskilling, training, and certification programs. That is why EPAM Singapore was awarded Gold for Best In-House Certification Programmes in the Employee Experience Awards 2023 and Silver in the SkillsFuture Employers Awards 2022 for our efforts in championing employees' skills development and building a lifelong learning culture at the workplace. You can also look forward to developing holistically with the multiracial festivals and various wellness and cultural activities organized by our passionate colleagues here.

Why EPAM?

· By choosing EPAM, you're getting a job at one of the most loved workplaces according to Newsweek 2022 & 2023.

· Employee ideas are the main driver of our business. We have a very supportive environment where your voice matters.

· You will be challenged while working side-by-side with the best talent globally. We work with top-notch technologies, constantly seeking new industry trends and best practices.

· We offer a transparent career path and an individual roadmap to engineer your future & accelerate your journey. · At EPAM, you can find vast opportunities for self-development: online courses and libraries, mentoring programs, partial grants of certification, and experience exchange with colleagues around the world.

You will learn, contribute, and grow with us.

What You’ll Do :

· Lead the design, development and implementation of data pipelines, transformations and aggregations to support analytics and machine learning initiatives

· Collaborate with cross-functional teams to define data requirements and translate them into robust and scalable solutions

· Optimize Spark jobs for performance and scalability, ensuring efficient data processing and indexing in Elasticsearch

· Design and deploy data engineering solutions on OpenShift using containerization and orchestration techniques · Implement and maintain CI/CD pipelines for data engineering workflows, ensuring platform stability and efficient resource utilization

· Monitor and optimize data pipeline performance, troubleshoot issues and implement necessary enhancements · Establish and maintain data quality and integrity throughout the data processing lifecycle

· Document data engineering processes, workflows and infrastructure configurations

· Stay abreast of emerging technologies and best practices in data engineering and DevOps

· Mentor and guide junior team members, fostering a culture of continuous learning and innovation

What Will Make You Shine :

· Bachelor's degree in Computer Science, Data Engineering, Information Technology, or a related field

· 7+ years of experience as a Data Engineer with expertise in Hadoop, Spark, and related technologies (HDFS, Hive, Ranger)

· Strong proficiency in Spark, Python, Scala, or Java for data engineering tasks

· Experience with containerization (Docker, Kubernetes) and orchestration platforms like OpenShift

· Knowledge of DevOps practices, CI/CD pipelines, and automation tools (Jenkins, Ansible, BitBucket)

· Experience with monitoring and logging tools (Grafana, Prometheus, Splunk) is a plus

· Strong problem-solving, troubleshooting, and communication skills

· Ability to work effectively in a fast-paced, collaborative environment

· Experience with cloud platforms (AWS, Azure, GCP) is a plus.

How We Hire Here,

we summarize the typical journey to finding a job within EPAM:

1. Apply and tell us about yourself

2. Go through some standard interviews:

·General interview with a recruiter

·Technical interview with our technology experts

· Manager interview or Offer interview with a hiring manager

3. Get ready to join the team Not sure if you meet all the requirements?

No problem. Let’s talk anyway and find out more.

It takes 1 min of application to start the journey with us. Apply now!

Working Hours: Monday – Friday (10am – 7pm)

Location: Central

Salary: Up to $6,000 (VB + AWS)

We are seeking a skilled React Native Developer to create high-performance mobile apps for both Android and iOS platforms. Your role will involve designing, developing, and maintaining these applications in collaboration with cross-functional teams.

Responsibilities:

• Collaborate with product management and engineering teams to define app requirements and functional specifications.
• Develop business modules using React Native, ensuring robustness and high performance.
• Implement and maintain native modules and ensure seamless interaction with the JavaScript layer.
• Partner with QA teams to uphold quality standards and facilitate smooth product releases.
• Optimize mobile applications for maximum performance and scalability.
• Integrate third-party SDKs and manage multi-platform product releases.
• Engage in the technical decision-making process, addressing complex challenges and leading the selection of technological solutions.
• Contribute to the development of technical standards, documentation, and perform code reviews.
• Enhance and maintain mobile logging systems and Jenkins pipelines to boost development efficiency.
• Provide off-hours technical support for live mobile applications.

Requirements:

• Bachelor’s degree in computer science, Software Engineering, or related field.
• Minimum of 3 years' experience in mobile app development.
• Proficient with TypeScript, React, React Native, and Expo.
• Experience with state management libraries such as Redux, MobX, or Zustand.
• Proficiency in at least one native development language: Kotlin, Java, Swift, or Objective-C.
• Proficient in using Git for version control.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Elane Yap Theng Yu- R1989397

ScienTec Consulting Pte Ltd - 11C5781

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

The NPI / Production Process Engineer is required to collaborate with the Program Management Team

and be involved in New Product Introduction activities and the creation of manufacturing Work

Instructions as well as other process documents. The incumbent is also expected to improve the work

processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

 Early involvement in NPI (New Product Introduction) activities.

 Interpret technical information (documents, drawings, and data) and analyse the manufacturing

process elements.

 Create Bill of Materials structure.

 Create manufacturing Work Instructions and other process documents in collaboration with the

Program Management, Production and Quality Assurance Teams.

 Carry out time studies and update the process cycle times.

 Provide timely technical support to the Production Team pertaining to manufacturing process and

quality issues.

 Engage in DFM and Lean Line Design activities.

 Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

 Actively and continuously improve the work processes to improve work efficiency and quality.

 Work with Program Management, Production, and Quality Assurance Teams to identify potential

process risks and make recommendations to mitigate these risks.

 Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

 Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

Manufacturing/Production or industrial Engineering

 Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

harness. Candidates with less experience may be considered for the Asst. Engineer position

 Ability to read and interpret technical documents and drawings

 Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

 Experienced in the creation Bill of Materials structures

 Good knowledge on Solid Edge or SolidWorks preferred.

 Proficient with Microsoft Outlook, Excel, Word and PowerPoint

 Lean/Six Sigma certification is desirable

 Strong analytical ability

 Team player with good communication skills

Job Summary

Process & Mechanical design, design review, RFQ preparation, technical evaluation, site installation supervision and coordination.

Job Description

• Review engineering standards/specifications/drawings, tender, quotations and proposal documents.
• Preliminary and detailed process & mechanical design of chemical plant, incineration plant, food waste plant, water/wastewater plant, offsites & utilities, pollution abatement, etc. including mechanical specification, design calculation, equipment layout design, support design, etc.
• Collaborate with BIM team for 3D model development and ensure the model is according to design.
• Coordination of internal and external engineering activities and the interdisciplinary interfaces to ensure that the project objectives and needs are achieved and exceeded.
• Prepare mechanical equipment requisitions and to ensure that the items procured are in accordance with specifications and schedule to ensure timely delivery.
• Technical review of mechanical equipment/system vendors proposal and submission.
• Coordination with equipment/system vendors on mechanical design and installation work during project execution stage.
• Prepare mechanical technical submissions and work with design lead to liaise with stakeholders, not limited to client/project consultant for submission approval.
• Prepare method statement for all the equipment installation
• Support during construction, installation, start-up, testing and commissioning activities.
• Ensure compliance & perform any other duties as requested by design lead/ engineering management.

Requirement

• Bachelor’s degree in Chemical or Mechanical Engineering or related engineering discipline.
• 3 years and above in process & mechanical design in process plant (such as chemical plant, incineration plant, food waste, water/wastewater plant, offsites & utilities, ACMV, pollution abatement, etc) and hands on experience working in fast paced, diverse and multi-disciplined projects and O&M activities.
• Familiar with process & mechanical design code of practice and standards in Singapore, EN, ASME & PED.
• Experience with Revit/AutoCAD Plant 3D preferred & in other related design software/applications.
• Familiar with Microsoft Office software.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Willingness to take on responsibility and work overtime to meet deadlines.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Ability to uphold the use of standards and escalate issues in a timely fashion.
• Ability to work independently with minimal oversight.

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Qualification/ Requirements

1. Degree in Civil & Structure Engineer (recognized by PEB)

2. Minimum 5 years Experience in Civil & Structures Work

3. 6 Days work arrangement

Job Scope

1. To assist attend and prepare for tender/ quotation related matters

2. To plan and prepare for works as per required

3. To attend meeting with clients, authorities and others when necessary

4. To carry out work related to civil & structural such as construction building supervision, periodic structural inspections, road audit and any other jobs as per instructed.

5. To prepare reports and any other necessary paper works as required by clients, authorities or company.

6. To carry out other tasks/ instructions from Project Director and management of the company.

Softskill

1. Able to communicate and have good writing skill in English

2. Have good knowledge in computer skill such as Microsoft Office, Design softwares and Autocaad.

3. Able to deliver quality works under short deadline.

4. Post a positive work attitude such as able to perform task independently with minimum supervision, good team works and hardworking

5.Possess good leadership, planning and decision-making skills

6.Possess good communication and interpersonal skills

Responsibilities:

• Provide tier-3 technical support for robotic systems, including hardware, software, and firmware components.
• Diagnose and resolve technical issues reported by customers, collaborating with the technical team to escalate and address complex problems.
• Document and report recurring issues to the Technical team to support continuous improvement and product development.
• Facilitate knowledge transfer sessions, training, and technical briefings to empower the Customer Success team in providing top-tier support to customers.
• Participate in testing and validation of new robotic systems and updates, providing critical feedback to ensure customer needs and experiences are addressed.
• Maintain detailed records of technical issues, resolutions, and feedback from customers and the Customer Success team.
• Develop and update technical documentation, user manuals, and support guides to assist the Customer Success team and customers in effectively utilizing robotic systems.

Requirements:

• Bachelor’s degree in Robotics, Electrical Engineering, Mechanical Engineering, Computer Science, or a related field.
• 2+ years of experience in technical support
• Excellent problem-solving skills with the ability to diagnose and resolve complex technical issues.
• Strong communication and interpersonal skills, with the ability to effectively bridge gaps between technical and non-technical teams.
• This position may require occasional travel to customer sites.
• Good English communication skills (verbal and written).

Our client provides advanced instruments and systems designed for high performance across various industries.

• Prepare service and spare parts quotations to customer inquiries.
• Build and maintain strong customer relationships to ensure high-quality service and support.
• Perform in-house repairs and on-site commissioning for gas and water quality analysers, CEMS, and AQMS, troubleshoot issues.
• Collaborate with customers to address service concerns and offer technical solutions.
• Support the project team in conducting FAT and SAT and deliver product training to end users and distributors.

Requirements:

• Degree in Mechanical Engineering/Environmental Science Engineering or equivalent.
• At least 2 years of experience in the analytical instruments.
• Good knowledge of gas analyzers, CEMS, and water quality analyzers.
• Customer-oriented with a positive attitude, along with excellent planning and time management skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Job Duties & Responsibilities:-

• Overseeing the procurement of materials.
• Coordinating with the various clients , consultants, main-contractors , architects, sub contractors and specialist to ensure the smooth and timely execution of the project deliverables.
• Ensuring that all works are carried out in accordance with the project specifications.
• Ensuring that all works are carried out within the project budget given.
• Overseeing the various design elements of the project.
• Providing timely submissions for cash flow and progress claims.
• Procurement of materials and ensuring the timely delivery of the materials as per site requirement.
• Ensuring that all team members can deliver their daily works and that the team meets the project requirements.
• Monitoring and improving of overall project progress to meet critical milestone dates.
• Submission of monthly / weekly progress and safety reports.
• Reporting of all project matters to the management.
• Preparing and presenting of consolidated contractual claims to the client representives.
• Any other works/tasks given by the Management for the completion of the project and other Ad-hoc assignments.

Responsibilities：

1. Responsible for pre-sales support of products and problem solving solutions, assisting sales to research and analyze customer demand, formulating technical proposal and tender, expounding on technical solutions, demonstrating products and answering technical inquiries.

2. Assist sales to promote and sell products and problem solving solutions.

3. Collect and feed back customer’s opinions on products and technology to the technical department. Deepen solutions according to customer’s demand, and assist technical engineers to implement solutions.

4. Conduct relevant technical training for internal sales and pre-sales as well as external partners.

Requirements：

1. Bachelor degree or above; Computer, automatization or logistics majors are preferred.

2. Have three years and above experience in logistics automation, e-commerce or ERP-WMS; Experience in solution design, technical consultation, and project bidding is preferred.

3. Capable of analyzing, guiding demand and designing solutions in logistics, manufacturing storage, e-commerce and related IT systems.

4. Problem solving oriented , honest, pragmatic and responsible, highly enthusiastic and a team player.

5. Good communication and presentation skills, English can be used as working language; Proficiency in two or more foreign languages is preferred.

6. Willing to travel a lot.

...

• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programs.
• Liaise with Consultants on technical issues and coordinate the site activities with subcontractors.
• Maintain quality standards and carry out site inspections.
• Ensure compliance with EHS requirements, regulations, and best practices throughout the project lifecycle.
• To supervise and ensure works are in accordance to the contract drawings and specifications.
• Ensure site safety and proper execution of site work procedure on site
• Plan the sequences of the construction operations following the Project Quality Plan.

Requirements

• Minimum 5 years Local Experience in Construction Industry;
• Degree in Civil Engineering or Construction related field;
• Able to work independently, a strong team player and to handle fast paced projects.
• Good interpersonal, written and verbal communication skills for collaboration with stakeholders across all levels.
• Independent, diligent and highly motivated with excellent team spirit

Project Engineer

Job Detail:

• Basic salary $3,500 - $4,500 (Subject to the experiences)
• VB
• 5.5 days, Mon - Fri 8am - 6pm; Sat 8am - 12nn
• Full 6 days week for the first 6 months of employment
• Aljunied

Job Scope:

• Manage the transmission of documents and drawings to the client and subcontractor to ensure the updated drawings are issued
• Prepare method statements and work procedures
• Conduct weekly or monthly meetings with subcontractors to update the progress of work
• Ensure the quality of work is achieved and all government and safety regulations are complied with
• Oversee drawing management and control of technical documentation
• Manage the procurement of resources, monitor and control material usage on site to avoid unnecessary wastage or wrongful usage
• Assist the Project Manager or Senior Project Engineer in coordination with consultants on change orders issued & liaise closely with the Quantity Surveyor by providing necessary supporting documents on the change order
• Organize labor, equipment, and material for day-to-day site activities
• Carry out material receiving inspections and maintain material records
• All delivery orders are to be returned to the office for record
• Prepare daily and monthly progress reports, perform, and maintain inspection records
• Any other duties assigned

Job Requirements:

• Degree in Civil Engineering ONLY (Recognized Degree by BCA/PEB)
• Minimum 1-2 years of local experience with main-con

How to apply:

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only shortlisted candidates will be notified.

Kok Jean Ray
Registration Number: R22110935
EA Licence No: 16C8004 (Elitez Pte Ltd)

• Create ATE (Advantest SmarTest PS1600 & EXA Scale) test program and integrate various test functions in test flow to support First Silicon bring up for wafer and package in NPI phase.
• Perform design validation/characterization/experiment on ATE across process, voltage, frequency and temperature. Evaluate test and product margins, debug and communicate result/yield/analysis to various teams.
• Utilize ATE test tools and other test instrument to debug and analyze the test, design and product issue.
• Support ATE test hardware design (Including build instruction, SI/PI...etc.) and debug.
• Support test time reduction.
• Support proto demands/qualification for IP owner and customer requests.
• Complete test development, test program transfer and product release at respective milestones.
• Initiate, plan and execute multiple projects to achieve target.
• Good knowledge of product engineering, failure analysis and manufacturing test process.
• Interest in learning, researching, sharing and implementing new technology and test methodology.
• Good written/Oral communication skills.
• Result orientated and team work.

M&E Engineer

Job Detail:

• Basic salary $3,500 - $4,500 (Subject to the experiences)
• VB
• 5.5 days, Mon - Fri 8am - 6pm; Sat 8am - 12nn
• Full 6 days week for the first 6 months of employment
• Aljunied

Job Scope:

• Assist M&E Manager in coordinating M&E specific works on site
• Control site progress & installation quality as per approved Shop Drawings, Technical Submissions and Equipment/Material Procurement/Fabrication/Delivery Schedule for on-time completion
• Responsible for M&E drawing coordination and production of CSD and individual service drawings quality
• Responsible for conducting QA/QC inspection, managing RE, RTO and responsible for clearing QA/QC inspections to meet with construction schedule
• ⁠Responsible for variation order cost collection, cost verification of the VO works and make necessary recommendation of VO prices
• ⁠To check, evaluate and confirm work done and material supply quantity status for the purpose of M&E sub-contractor/NSC vendors progress payments incl. instruction of progress substantiation document preparation by sub-contractors and vendors
• ⁠⁠Responsible for site implementation of safety standards to comply with IMS safe work methods
• Responsible for attendance to daily site co-ordination meeting and provide detail co- ordination with sub-contractors

Job Requirements:

• Degree in M&E Engineering ONLY (Recognized Degree by BCA/PEB)
• Minimum 2-3years in construction related experiences
• Possess Electrical Trade experiences will be added advantage

How to apply:

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only shortlisted candidates will be notified.

Kok Jean Ray
Registration Number: R22110935
EA Licence No: 16C8004 (Elitez Pte Ltd)

Join Our Dynamic Team as a Senior Project Engineer!

Are you an experienced engineer with a passion for innovation and a track record of excellence? Do you thrive in dynamic environments where your expertise can drive impactful change? If so, we invite you to take your career to the next level with us!

We are seeking a highly skilled Senior Project Engineer to join our team and lead our mission of innovation and excellence. As a Senior Project Engineer, you will play a pivotal role in managing and executing a variety of projects across different facilities. You will collaborate with a team of dedicated professionals, leveraging the latest technologies and your extensive experience to deliver outstanding results.

Key Responsibilities:

• Work closely with Project Managers to plan and manage projects effectively, ensuring seamless execution and alignment with technical and engineering requirements.
• Collaborate with main contractors and consultants to diligently track work progress and adherence to the project schedule, ensuring engineering specifications and standards are met.
• Facilitate communication with subcontractors and suppliers, meticulously prepare all project costs, process claims, and monitor budgets to ensure financial efficiency and compliance with engineering requirements.
• Attend site meetings and perform detailed site inspections to ensure project milestones are met and technical standards are upheld.
• Oversee the daily activities of subcontractors, ensuring strict adherence to job site safety policies and procedures, with a focus on engineering safety standards.
• Monitor and inspect work progress, maintaining rigorous quality control and assurance standards, and promptly address any engineering issues that arise.
• Work closely with the team to meet all requirements and expectations during testing and commissioning with consultants, ensuring successful project outcomes that meet engineering criteria.
• Prepare and review technical documentation, reports, and specifications to ensure clarity and accuracy throughout the project lifecycle.
• Identify potential risks and develop mitigation strategies to ensure project objectives are achieved without compromising safety or quality.
• Aid the Project Manager and team in the efficient closure of projects, including the handover process, OMM, and as-built documentation submission, ensuring all engineering documentation is accurate and complete.
• Ensure the proper upkeep of documents and efficiently upload them to the server for organized record-keeping, maintaining the integrity of all engineering records.
• Participate in post-project reviews to identify lessons learned and recommend improvements for future projects.

Qualifications:

• Diploma / Bachelor's degree in Engineering or related field
• Excellent problem-solving skills and analytical thinking
• Effective communication skills with the ability to collaborate in a team environment
• Commitment to maintaining high standards of safety and quality.
• High adaptability
• Minimum of 3 years of experience in a related field.
• Proven experience in project management and execution.

Why Join Us:

• Opportunity to work on innovative projects that make a real impact
• Collaborative and supportive team environment with mentorship opportunities
• Continuous learning and professional development opportunities
• Competitive compensation and benefits package
• Exciting company culture with team outings, events, and more

Helpdesk or (Outsourced) – End-User Support

Working hours: Monday to Friday, 9:00 AM - 6:30 PM.

Responsibilities:

• Oversee maintenance, set-up, installation/re-installation, relocation and migration of IT peripherals.
• Provide support for hardware, software, and peripheral devices, including upgrades and patches.
• Onsite & remote support for clients/end-users on IT-related requests
• Diagnose and able to resolve technical issues related to desktops, laptops, and printers.
• Ensure issues are addressed and resolved in a timely manner.
• Assist in configuring and setting up new employee workstations
• Manage software administration (e.g. Microsoft 365), including password resets and account management.

Requirements:

• Minimum ITE / Diploma in IT or equivalent.
• Fresh graduate are welcomed to apply.
• Able to deliver IT support to in a end-user environment.
• Excellent verbal and written communication skills, with a strong focus on customer service.
• Take initiative and able to work in a fast-paced environment, independently and also as part of a team.
• Open to help out after office hours (OT) depending on projects

Job Description

1. Establish action plan for all sales promotions
2. Drive sales growth through maximization of resources and execution of market segment strategies
3. Secure active customer relation data management within the assigned area
4. Establish / Maintain campaign results report to track progress and impact of marketing initatives and take appropriate actions in case of deviation
5. Achieve sales target set by management in assigned area
6. Assist ASM in supporting channel partners technically
7. Provide market and competitor intelligence on monthly base
8. Monitor customer, competitor activity and gather general market information and feedback to headquarter.
9. Create and maintain strong customer relationship with top notch customer service.

Requirements

• Diploma/Degree in Mechanical / Electronics Engineering
• Minimum 5 years of sales experience in multi-national industrial environment, preferably with wire processing machines, and more than 3 years in sales management
• Good basic understanding in industrial machinery, automation and software
• Excellent communication, presentation, and negotiation skills
• Ability to work independently and as part of a team
• Willingness to travel overseas and visit clients (up to 30% of time)
• Singaporeansa and PR only

· Drive Technical and Maintenance support to all operating facilities in instrumentation and control systems, including ICSS / DCS / PLC

· Ensure the installations are maintained and managed with respect to regulatory requirements

· Actively contribute with technical and advisory support to Operations Managers / Maintenance Managers and offshore facilities in terms of Instrumentation and Control Systems

· Actively contribute to incident investigation and provide technical support to Emergency Response team as and when required

· Participate in planned shutdown as and when required

· Review and provide the engineering solutions for Management of Change Request from Facilities as per procedure

· Review the Shutdown / Breakdown Reports and verify / carry out Root Cause Analysis

· Update Lesson Learned Register based on Management of Change Request, Shutdown / Breakdown Reports review, Survey / Audit Reports etc.

· Provide in-house training for the offshore team as and when required

· Carry out competency evaluation for onboard E&I Supervisors and Instrument technicians as requested

· Provide budget requirements in terms of maintenance, long term plan and surveys

· Provide input for new project bids and variation orders, based on Lessoned Learned from operating facilities

· Act as a mentor and resource for new employees and less experienced colleagues

· Continuously make suggestions for improvements in all spheres of influence

· Additional responsibilities as required

What you will do:

As Senior Sales Engineer HVAC, you will be responsible for small accounts offering less technically complex solutions. Builds relationship with customers, which may be end users, to understand needs and offers solution within a standard framework or range on pricing and margin.

How you will do it:

• Study product knowledge and company working procedure, continuous to improve domain knowledge of product, company and industry.
• Plan annual secured order strategy aligned with Department goal. Achieve business sales target with YOY growth expectation in the region.
• Prepare and issue tenders and proposals to customers. Lead negotiation and/or bidding activity at optimum profit levels to the company. Close orders to achieve the goals and targets assigned. Responsible for payment collection.
• Provide monthly reporting on assigned vertical secured and revenue attainment as well as non-financial reporting to management team.
• Be proactive to liaise, develop relationship and influence customer(s) to maintain a long-term service relationship, ensure customer satisfaction at high level.
• Develop sales leads and identify customer requirements.
• Monitor and collect competitors’ activities in market and report periodically directed by company.
• Independently develop and follow up HVAC projects to provide solutions for customers.
• Responsible for the promotion of HVAC products and systems in design institutes, industry associations and integrators in the industry in the region.
• Conduct cold calls and new business development.
• Explore and execute end to end HVAC project, and provide product/industry solution to customer.

What we look for:

• Bachelor Degree or above, preferably in Mechanical engineering and HVAC engineering or Electrical / Electronic engineering
• Minimum 1-3 years working experience as sales/marketing position in direct selling industrial machineries
• Self-motivated, hardworking and positive, hunter personality
• Strong interpersonal, presentation and selling skills
• Good spoken and written in English

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects