Job Description:

• Assist HOD and supervise a team of technicians in delivering technical advices/ support to the various business units
• Actively involved in job estimation and WIP (Work-In-Progress) tracking
• Work with engineering support section on product design, tester design, maintenance service and implement hardware and software components to integrate into in-service systems
• Manage and supervise the Maintenance, Repair & Overhaul (MRO) tasks allocated to the section in supporting commercial products, company's proprietary and non-proprietary products
• Deliver allocated and ad-hoc tasks within stipulated timeline and cost
• Understand the concept of Reliability & Maintainability (R&M) tools such as FMEA so to achieve improvement in MRO effectiveness, reduced manpower requirements and minimized life cycle cost
• Conduct and lead failure investigations and prepare reports for problems or issues based on findings from facts, researches, studies and make necessary recommendations
• Submit investigation reports to relevant authority for approval
• Generate documents and engineering process plans to ensure operation requirements and safety standards are maintained
• Conduct technology search for MRO applications and introduce technology enablers to improve performance and quality of the repaired systems or components
• Participate in Customer meetings to gain insights to their needs and expectations, translating these requirements into deliverables where feasible
• Responsible for the training of technicians; planning, assigning, and directing work to a group of technicians; appraising, addressing complaints and resolving conflicts
• Perform other related duties as assigned

Job Requirements:

• Degree in Mechanical/ Mechatronic Engineering
• Experience in Component MRO in related industries
• Experience in effectively leading a team of Technicians
• Experience in SAP System is advantageous
• Knowledge in Army systems will be an added advantage
• Ability to read and interpret schematics and datasheets
• Strong technical skills in troubleshooting Engine, Transmission or Gearboxes
• Competent in Mechanical/Mechatronic system
• Familiar with components testing
• Ability to read and interpret Engineering Drawing and datasheets
• Good communication skills and a strong team player
• Able to work under pressure and tight timeline
• Good analytical and problem-solving skill
• Able to read Manual and Engineering Drawing for any re-engineering work required

Purpose of Position

• Provide maintenance and engineering support for process control systems to ensure safe and reliable operation of the plant.
• Provide technical and engineering support for projects and modifications related to control system to achieve business and operational objectives.

Principle Responsibilities

• Responsible for the maintenance and engineering of all process control systems which may be installed in the plant or externally at customers' site.
• Perform fine-tuning, troubleshooting, modification and programming of the Control System as needed to improve system performance and optimize process operation needs.
• Response to 24-hour emergency call-out and provide night-shift support during plant startup, shutdown and as requested by Operation Team.
• Work closely with the Instrument Team to troubleshoot and resolve instrumentation problems.
• Work with the Project Team to develop requirements and/or specifications of control system for projects and modifications; supervise & implement the project works according to the schedule and requirements.
• Plan and execute preventive and corrective maintenance works for plant turnaround.
• Perform strategy planning for control system expansion, upgrading and renewal.

Job Requirements

• Familiar and hand-on with the engineering tools and programming languages of control systems (Honeywell, Siemens PCS7 and Triconex), able to make program modifications and configuration changes confidently.
• Experienced and familiar with various phases of project works such as engineering, fabrication & construction and commissioning.
• Knowledge and experience with computer system networking, server/client and virtualization architectures.
• Degree in Electronics/Electrical Engineering, major in Control is preferred.
• Minimum 5 years relevant experience working and maintaining Honeywell DCS, Siemens PCS7, Triconex PLC and etc.

Job Description

The Quality Assurance Engineer is responsible to ensure that all products, processes, methods and equipment are validated and is the quality representative in Quality improvement projects. He/She handles external customer complaints and change management business processes. The QA Engineer expected to lead and drive cross functional team in day-to-day issues, global bench marking activities, internal process robustness and automations. He/She must be inclined to have hands-on understanding of tool and product functionality and production.

In this role, you will have the opportunity/responsibility to:

• Continuous improvement of Core Value Drivers and KPI’s in support of quality and business growth through the rigorous deployment of DBS tools
• Manage CAPA & 8D processes; assure root cause analysis and effectively implement robust CAPA in a timely manner. Follow-up and verification of CAPAs to assure no recurrence. Adhere to corporate escalation and reporting guidelines
• Strong focus on variation reduction using data driven approach and automotive core tools such PFMEA, Capability analysis/SPC. MSA etc.
• Proactively identify leading key Indicators and provide Manufacturing Quality Trend Charts/Analysis and suggest/implement improvements based on the trends.
• Support QMS to meet ISO 9001 requirements. Perform Internal Audits per the annual audit schedule, prepare report, follow-up and verification of completion of actions initiated from audit(s)
• Evaluates work methods, procedures and policies. Tracks progress of qualification status and reliability results & determine disposition of non-conforming processes.
• Lead and Support People engagement initiatives both site and global
• Drive efficiency, automation and digitalization in production & QM methods

The essential requirements of the job include:

• Minimum Bachelor’s degree in Engineering/Science
• Min 5 years relevant working experience in manufacturing with 3 years in Quality Control/Assurance in Semiconductor, Electronics or Automotive Manufacturing.
• Solid understanding of quality tools and methods. (FMEA, Control Plan, SPC, 5Why, FTA, 8D, 6 Sigma, Minitab/JMP)
• Certified Quality Engineer or Certified Lead auditor with thorough understanding of ISO 9001 2015 requirements
• Excellent English communication and Interpersonal skills.

It would be a plus if you also possess previous experience in:

• Previous exposure to the Manufacturing sector.
• Excellent problem-solving and analytical skills.
• Analytical and data visualization skills eg Tableau, Qlikview
• Lean / Kaizen proficiency/ black belt proficiency a plus

Job Description

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review Architectural drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Degree in Civil/Structural Engineering.
• Minimum 5 years Site/Working Experience.
• Good Organizational and planning skill.
• Able to work independently and as a team.
• Candidates with Marine Project experience preferred.

As a Facilities Mechanical Engineer, you will be leading engineering and maintenance works in the fields of Mechanical equipment and system on site, to achieve continual improvement to system robustness, reliability and efficiency with the necessary guidance and direction from Facilities organization, to achieve facilities department, site, facilities corporate and company goals.

Job Responsibilities

• Plan and implement preventive and corrective maintenance programs for Facilities mechanical systems including HVAC, exhaust systems, scrubbers, process cooling water, chillers, boilers, cooling towers, compressed air systems, Fire protection system and cleanroom air systems to ensure maximum equipment uptime and reliability.
• Plan, design and lead mechanical system expansion projects to facilitate tool utilities demand of future technology of manufacturing equipment.
• Plan, design and lead mechanical engineering projects includes new construction, system upgrading and quality improvement.
• Respond and problem solving of system issues and production interruptions to mechanical related systems.
• Perform capacity tracking and planning for mechanical systems.
• Enforce to company’s environmental safety health policy and procedure, standard operating procedure with risk assessment, good housekeeping standard and quality policy when performing work.
• Apply computer base software to document and analyses records of maintenance work order, equipment history and project tracking.
• Maintain maintenance record for system fault history traceability.
• Proficient in quality tool such as 8D & 5 WHY analysis for troubleshooting or incidents.
• Initiate and lead energy savings & sustainability projects.

Job Requirements

• Bachelor’s degree in Mechanical engineering.
• Design and Engineering background of mechanical system such as HVAC system and Exhaust system will be of good advantage.
• Ability to understand and use schematic, single-line drawing and related equipment and system documentation.
• Ability to work in a team environment with various professional level.
• Considerable knowledge and application of problem solving and data analysis methodology.
• Considerable knowledge of maintenance practices and procedure and installation work.

Position Overview:

We are seeking a motivated and detail-oriented Semiconductor Engineer to join our Tool Installation team. This position is ideal for recent graduates with a strong foundation in semiconductor technology, electrical engineering, or mechanical engineering. You will be responsible for installing, maintaining, and troubleshooting semiconductor tools used in the production of advanced semiconductor devices.

Key Responsibilities:

• Tool Installation & Commissioning: Support the installation and setup of semiconductor manufacturing tools and equipment, ensuring they meet operational standards and specifications.
• Technical Support: Provide troubleshooting and technical support for tool-related issues, collaborating with cross-functional teams to resolve problems efficiently.
• Maintenance & Calibration: Assist in the regular maintenance and calibration of tools, ensuring they operate at optimal performance levels.
• Documentation: Maintain detailed records of installations, modifications, maintenance, and performance data for tools and equipment.

Required Qualifications:

• Education: Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Semiconductor Technology, or a related field.
• Certification: Must have an Engineer certification (e.g., EIT or equivalent).
• Technical Skills: Familiarity with semiconductor fabrication processes and tools is a plus. Strong knowledge of electrical circuits, mechanical systems, and troubleshooting techniques.
• Problem Solving: Ability to diagnose and resolve technical issues effectively and efficiently.
• Communication: Strong written and verbal communication skills. Ability to document work processes clearly and collaborate effectively with team members.
• Team Player: Ability to work in a team environment and follow detailed instructions while taking initiative when needed.
• Attention to Detail: A keen eye for detail, ensuring that installations and processes are carried out according to established protocols and safety guidelines.

Preferred Qualifications:

• Internship or project experience related to semiconductor tool installation or maintenance is a plus.
• Familiarity with cleanroom environments and semiconductor manufacturing equipment is desirable but not required.

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Requirement:

• Strong technical aptitude and the ability to understand and explain complex products and solutions
• Excellent communication and interpersonal skills, with the ability to build and maintain relationships with customers
• Problem-solving skills and the ability to think creatively to overcome challenges
• Strong negotiation and presentation skills
• Proficiency in Microsoft Office Suite and customer relationship management (CRM) tools
• Willingness to travel within the region as needed

Job Description:

• Proactively identify and pursue new sales opportunities within your assigned territory
• Develop and execute targeted sales strategies to meet and exceed sales targets
• Provide technical expertise and support to customers, ensuring their needs are met
• Collaborate with cross-functional teams to deliver seamless customer experiences
• Continuously monitor market trends and competitor activities to identify new avenues for growth
• Maintain accurate records of all customer interactions and sales activities
• Represent the company at trade shows, conferences, and other industry events

Job Scope:

• Build something cool from scratch to final products & system
• Understand business needs, technical requirements and give innovative solutions
• Work smart instead of hard to solve all kind of funny issues
• Relax and think out of the box to create something innovative to make someone happy include yourself and who you really care
• Study latest technology in electronics, software, data analysis, AI etc.
• Identify prospective customers by using business directories, following leads from existing clients, participating in organizations and events, and attending trade shows and conferences.
• Initiate sales campaigns and follow marketing plan guidelines in order to meet sales and production expectations.
• Select the correct products and solutions or assist customers in making product selections, based on customers' needs, product specifications, and prepare quote prices, credit terms, or other bid specifications for customer
• Demonstrate and explain the operation and use of products and systems.
• Complete product and development training as required.
• Visit establishments to evaluate needs or to promote product or service sales.
• Prepare sales contracts for orders obtained, and submit orders for processing.
• Project coordination for project development, deployment,testing.

Requirement:

• Prefer Bachelor or Master Degree in Engineering (Electronics/Computing/Software) or equivalent.
• Prefer 5 Years or above experience in embedded system design, electronics hardware and software development or sales and marketing
• Candidate must have good understanding about electronics system, architecture and be able to understand clearly the hardware or software with less guidance. Knowledge with related developments tools and programming language like C, Python is basic requirement
• Candidate must be active and quick learner, and fearless of new things
• Candidates fluent in both English and Mandarin will be preferred, as they will be required to liaise with our R&D team in Shanghai & Fuzhou, China.
• Prefer ambitious, mature & good communicator

Inspection Engineer (Tankage)

Job Description:

Inspection on various tanks such as basic repair and maintenance.

Performed regular inspections to ensure Quality Assurance on the various installed materials in the facility.

Manage the inspection process regularly by determining the corrosion rate.

Perform internal/external inspections on storage tanks and to generate reports with repair recommendations.

Monitor the tank inspections on regular intervals.

Performed various quality assurance procedures on the tanks.

Maintain records of all inspection process carried in both hard copies as well as electronic copy.

Perform inspection asper various quality assurance procedures on the tank’s asper client criteria.

Perform internal and external inspections to determine if it meets the acceptance criteria of a specific code, standard or document.

Properly interpret regulations, codes, and industry standards.

Computer usage to compile and submit daily reports, inspection reports, and inter-office communications.

Pay attention to detail and be capable of recommending and approving repairs as well as performing visual inspection of completed work.

Maintains a positive relationship between client, facility, and customer; and promote a positive attitude towards co-workers.

Compile and submit completed inspection reports in a timely manner.

Inspection of various storage tanks in accordance with API inspection codes and Recommended practices asper API- 620, 650 and 653.

To provide technical expertise on all NDT matters as required on projects.

Qualifications:

Degree in any related engineering/science field from a recognized university

Candidates with a Diploma in Mechanical Engineering, preferably with more than 15 years of experience in the petrochemical industry working in fixed equipment or inspection related areas

Knowledge of materials selection, Non-Destructive Examination techniques, welding, and risk-based inspection procedures, would be an advantage

Familiarity with major API codes and specially API 650 for tankage will be an added advantage

Knowledge and ability to use computer programs such as MS Office, etc.

Willingness to work extended hours, not afraid of heights and working in confined spaces

A team player with strong communication and interpersonal skills

Capable of effectively driving milestone planning for Equipment Strategy development with key members from various functions

Candidates having work experience with ExxonMobil will be prioritized.

Job Description:

• Support engineers in conducting site acceptance tests, commissioning, and start-up for transformers and switchgear. Knowledge of UPS, Low Voltage/Medium Voltage Variable Speed Drives, and PLC systems is a plus.
• Perform preventive maintenance, breakdown repairs, fault investigation, and troubleshooting of electrical equipment.
• Provide field operations and technical support to customers, helping them identify their needs and offering post-sales service solutions.
• Address on-site repair and maintenance issues, troubleshoot, and effectively resolve technical problems.
• Deliver field feedback to engineering and manufacturing teams to assist in new product development and improvements to existing products.
• Manage the procurement of spare parts from Supplier

Job Requirements:

• Diploma/ITE in Electrical Engineering or a related field.
• Relevant experience in technical servicing roles.
• Hands-on experience in customer service with the ability to work independently on-site.
• 1 to 2 years of field service experience in a related industry.
• Strong communication & analytical skills.
• Must be ready to travel on business trips

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Apply Now” or aliceyap(a)hkmsvs.com

All applications will be treated in the strictest confidence and only shortlisted candidates will be notified

Yap Lay Choo

EA Licence No. 03C5391 | Registration No. R1987101

VFlowTech is excited to offer a PhD scholarship under the Industrial Postgraduate Programme, a fully funded initiative by the Singapore Economic Development Board and Enterprise Singapore. This program provides aspiring researchers with the opportunity to address critical challenges in Vanadium Redox Flow Battery technology, focusing on mitigating shunt currents, reducing losses, and enhancing system reliability and efficiency. Candidates will be full-time employees of VFlowTech while pursuing their PhD at Newcastle University (UK).

The research project aims to develop a hybrid energy storage system (HESS) by integrating flow battery and lithium-ion battery technologies into a single microgrid solution. The candidate will contribute to hardware development and advanced control algorithm creation, optimizing performance, efficiency, and reliability. This prestigious program offers a unique opportunity to drive innovation in energy storage systems.

Key Responsibilities:

1) Design and Simulation of Hybrid Energy Storage System (HESS):

• Determine suitable battery chemistries and sizes for the HESS.
  • Conduct simulation tests and analyze initial results to ensure optimal design and functionality.

2) Development and testing of HESS Hardware:

• Implement and integrate the simulated HESS design into the physical hardware.
  • Conduct intensive testing and validation of the HESS prototype to ensure performance standards are met.

3) Development of Energy MAnagement System (EMS) Algorithm:

• Develop a hybrid EMS to control and optimize the use of both battery technologies.
  • Implement smart charge and discharge control logic to enhance system efficiency, reliability, safety, cost-effectiveness, lifespan, and overall power and energy density.
  • Utilize state-of-the-art AI techniques to develop advanced EMS algorithms for efficient energy management.

Qualifications:

- Academic Background:

• An Undergraduate or master’s degree in electrical engineering, Power Electronics, Energy Systems, or closely related field.
  • Strong academic record and research experience in relevant areas.

- Technical Skills:

• Proficiency in power electronics and energy storage system design.
  • Experience with battery management systems (BMS) and energy management systems (EMS).
  • Familiarity with simulation software and tools used in power and energy systems.

- Research and Development:

• Demonstrated experience in designing, simulating, and testing energy storage systems.
• Ability to conduct independent research and develop innovative solutions to complex problems.
  • Strong analytical and problem-solving skills.

- Soft Skills:

• Excellent written and verbal communication skills.
  • Ability to work collaboratively in a multidisciplinary team.
  • Strong organizational and project management skills.

Benefits:

• Opportunity to work on a pioneering project with significant real-world applications.
• Access to state-of-the-art research facilities and resources.
• Collaboration with leading experts in the field of energy storage and power electronics.
• Competitive salary and funding for research-related expenses.
• Work and earn a PhD degree simultaneously with no tuition fee.

Application Process:

Interested candidates should submit the following documents:

• A detailed CV highlighting relevant experience and skills.
• A cover letter explaining your motivation for applying and your research interests.
• Academic transcripts and certificates.
• Contact information for at least two academic or professional references.

Deadline:

Applications will be reviewed on a rolling basis until the position is filled. Early applications are encourage.

Contact:

For further information or to submit your application, please contact: h[email protected] and [email protected]

Join us in advancing the future of energy storage technology and making a significant impact on the efficiency and reliability of micro-grid systems!

The EOS/ASE Geodesy Group at NTU is searching for a Research Engineer II to work under the supervision of Prof Emma Hill on the role of tectonics in modifying regional relative sea level (RSL). The successful candidate will analyse geodetic data and conduct numerical modelling to estimate RSL related to past and future earthquakes and other processes of land-height change in Southeast Asia.

Further to this, they will work on projects aimed at effective communication of these results to policymakers and other stakeholders. They will investigate best practices for communicating probabilistic estimates of potential future impacts of earthquakes on RSL. The successful candidate will have a Bachelors’ degree in Earth Science, natural hazards, remote sensing, geodesy, computer science, data science, or a related subject. Most importantly they will have enthusiasm to engage in the research work of our group, and a passion for making Southeast Asia a safer and more sustainable place for all communities in the region.

Key Responsibilities:

• Analyze and interpret geodetic and remote sensing data from regional observing networks and satellites to further our understanding of land-height change in Southeast Asia.
• Conduct numerical modeling of tectonic processes, including to use numerical modeling techniques to model deformation resulting from viscoelastic deformation of the Earth’s asthenosphere.
• Conduct probabilistic analysis for potential future impacts of earthquakes on RSL.
• Conduct studies into best practices for communication of results on RSL from tectonics to policymakers and other key stakeholders, including discussion with these groups to learn their needs.

Job Requirements:

• Bachelor’s degree in Earth or environmental science.
• At least 4 years of experience working in an Earth science field.
• Demonstrated experience in geodetic data analysis and numerical modelling of tectonic deformation.
• Demonstrated experience conducting scientific research.
• Demonstrated ability to write and present at the level of peer-reviewed scientific journals and international conferences, which will usually be in English.
• Collaborative mindset and strong teamwork skills.
• Evidence of lead authorship of papers submitted or accepted into peer-reviewed journals would be a plus.

EOS seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status and family responsibilities, or disability. Interested applicants should submit a CV and a statement of interests. Evaluation of application starts immediately until the position is filled. We regret to inform that only shortlisted candidates will be notified.

To apply, please submit a CV, cover letter, statement of research interests, and the names of three referees.

We regret to inform that only shortlisted candidates will be notified.

• Report to Construction Manager
• Manage and oversee construction activities near existing SPPG tunnel/GTP
• Coordination between client, consultant and sub-contractor(vendors)
• Ensure compliance with safety procedure and regulations
• Carry-out regular inspections and regular checks of concerned construction activities
• Resolve technical and engineering issue
• Ensure proper documentation (including Risk assessment/Method statement) and record-keeping of construction activities
• Ensure the activities comply with the local Authorities’ quality, environment, health & safety requirements and Clients’ General Specification
• Ensuring Permit to Work (PTW) is verified and valid for assigned duties.

Job Requirements:

• Degree in Civil Engineering from a recognized university, accredited by the Singapore PE Board
• Registered Resident Engineer with IES and valid certification in Singapore (Mandatory)
• Minimum of 1 year of Engineering experience
• 2 years of experience in the supervision of construction projects preferred
• Progress oriented, team player
• Technical expertise and knowledge in Civil Engineering Construction especially piling/RC works
• Proficient in Microsoft Offic and Auto CAD
• Attained CSCPM/BCSS/Confined space/Work At Height
• Good interpersonal skills and hardworking
• Location : Woodlands
• Project : Viaducts

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• He/She is required to prospect for new accounts, maintain existing accounts, and build relationships with newly acquired customers.
• Service corporate accounts and manage full sales cycles
• You are required to apply appropriate strategies to increase sales.
• Keep updated on market competition and prices
• Attend site meetings and responsible to liaise with our customers on their solution needs and after sales need.
• Follow up and process sales orders, sales report generation, project management and sales presentations.
• Corresponding with customers on quotations and purchase order related issues.
• Manage daily sales inquiries and quotations via email and phone for both existing and new clients.
• Work closely & coordinate with the indoor team to maximize sales figures.
• Liaise with operation team and ensure timely delivery of customers’ orders
• To prepare report after Job Done / Pump Repair Done. (Training will be provided)
• Carry out risk assessment; Make recommendations on risk control measures and Communication Risk Assessments (RA) to concerned parties and other Method of Statement. (Training will be provided)
• Any other ad hoc duties assigned

Requirements:

• A degree or diploma holder preferably in Mechanical Engineering or a related field.
• Applicants with no working experience are welcomed (Training provided)
• Strong knowledge of pumps and their applications is highly desirable
• Experience in engineering sales/customer service is a plus.
• Proficiency in AutoCAD, Excel, and PowerPoint
• Willingness to travel for business purposes as required
• Excellent communication and interpersonal skills.
• Willing to learn, pleasant personality, humble responsible, positive working attitude and hardworking.
• Ability to work independently and as part of a team.
• Proficiency in Mandarin to liaise with Mandarin-speaking clients and suppliers.
• Salary base on the working experience, additionally + Commission
• Flexible and able to Support on Saturday if required.
• Class 3 driving license with own vehicle.

ATTRACTIVE REMUNERATION PACKAGES WILL BE OFFERED TO THE RIGHT CANDICATE

Kindly send us your updated resume indicating your current and expected salary to: [email protected]

We regret that only shortlisted candidate will be notified.

Visit us at: https://www.acms.com.sg

Job summary

Attractive salary package

Learning & Development opportunity

Positive Working Environment Commission

• Assist in the planning and scheduling of construction activities.
• Coordinate with architects, subcontractors, and suppliers to ensure project specifications are met.
• Conduct site inspections to ensure compliance with safety and quality standards.
• Supervise and manage on-site construction activities.
• Monitor project progress and provide regular updates to the project manager.
• Ensure all materials and workmanship meet the required standards and specifications.
• Implement and enforce health and safety protocols on the construction site.
• Conduct safety audits and inspections to ensure a safe working environment.
• Prepare and submit reports on project status, costs, and any issues or delays.
• Liaise with clients, architects, engineers, and other stakeholders to ensure smooth project execution.
• Attend project meetings and provide updates on construction progress and challenges.

Requirements

• Required language(s): Chinese, English (in order to liaise with the English & Chinese speaking associates)
• Graduate with no experience welcome.
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.
• Good team player and problem solver.

Job Responsibilities

• Provide effective and timely services and support all existing scheduled projects
• Provide sales support on technical specification & information, data, drawings
• Project quotation specification confirmation and technical clarification
• Design accessories and create 3DCAD drawings for quotations and assemblies
• Provide consultation and offer workable solutions to help solve customers’ concerns
• Do on-site technical assessment and provide engineering solutions
• Presentation and training to internal and customers
• Ensures quality by completing all final inspections and repair reports

Requirements

• Degree/Diploma in Mechanical / Instrumentation / Mechatronics Engineering or equivalent
• Ability to operate 3DCAD (Solid Works)
• Good knowledge onl valves and instrumentation is preferred.
• Related experience in process & control or instrumentation service industry is preferred.
• Decisive, drive and ability to deliver effective, innovative solutions
• Good knowledge of Microsoft excel, word and powerpoint
• Be able to work long term with us
• English fluency (meeting and writing reports inside and outside the company)
• A person who has positive and can think and act for himself/herself (most important)
• A person who can act flexibly for sudden related work
• A person who can keep confidentiality
• Good people management skills with excellent communication and interpersonal skills at all levels.

Reporting Function

• Directly report to Engineering Manager/General Manager

• Site & office project management and daily operations including inspections, handover, site measurements, project management
• Handling technical and engineering issues
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Liaison and meeting with client's representatives, relevant authorities and consultants
• Site co-ordination, monitoring and report work progress
• Responsible for timely submission of reports and completion of projects including tender/submission with target dates
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of projects
• Conduct site check on the repair works, in accordance with approved methods and procedures proposed by the Qualified Person, specifications and instructions

Job Requirement:

• At least Diploma, Advanced Diploma, Bachelor’s Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent
• 0 - 2 Year(s) of experience in sales of products & services, preferably in Engineering Industry
• Good communication skills and networking skills
• Self-drive & motivated individual
• Salary will be paid based on experiences and qualifications

Job Summary

We are looking for a motivated Assistant Engineer to join our team. You will be responsible for servicing, troubleshooting, and testing of gas detector, ensuring minimal disruption to customer operations. Training and professional development opportunities will be provided.

Job Description

• Servicing of Gas Detectors and other measuring equipment.
• Ability to trouble-shoot of different brand Gas Detectors and other measuring equipment.
• Testing of Gas Detectors and other measuring equipment.
• Coordinate with customers to ensure committed service work scopes are executed without business interruption.
• Certificates generation and Report generating on all service-related activities.
• Adhere to all legal, customers' and company's safety protocol, rules, and regulations, ensuring the safety of personnel, equipment and property, and housekeeping.

For this role, you will need to maintain a good relationship with customers to always achieve positive customers’ satisfaction. The Department Manager and/or Snr. Lead Engineer will assign ad-hoc tasks as and when required.

A team player and work closely with the technical team.

On-the-Job training will be provided, and in-house/principal training will be arranged for the successful hired.

Job Requirement

• Min. Nitec in Electrical/ Electronic Engineering discipline.
• Preferably with 1 year of working experience in Gas Detector servicing or maintenance. However, fresh candidates with no relevant experience are welcome to apply!
• Good communication and interpersonal skills.
• Willingness to learn. Good working attitude. A team player.
• Possessing a Class 3 driving license is a plus.

We regret to inform you that only shortlisted candidates will be contacted.

Job Summary:

The Project Engineer is responsible for planning, coordinating, and executing engineering projects, ensuring they are completed on time, within budget, and to the required quality standards. This role involves working closely with project managers, engineering teams, and other departments to ensure successful project delivery. The Project Engineer will be involved in project planning, technical review, and site coordination, providing essential support throughout the project lifecycle.

Key Responsibilities:

• Project Planning and Coordination:Assist in defining project scope, objectives, and deliverables, ensuring alignment with client requirements and business goals.
  Develop and monitor project schedules, budgets, and work plans, using project management tools to track progress and ensure timely completion.
  Coordinate with engineering, procurement, and construction teams to ensure alignment on project milestones and deliverables.
  
• Technical Support and Design Review:Review and interpret technical drawings, specifications, and documentation to ensure engineering quality and compliance.
  Provide technical input to the design process, working closely with design teams to address any engineering challenges.
  Support project manager in evaluating design changes, assessing their impact on project schedules and budgets.
  
• Site Coordination and Quality Control:Conduct site visits as needed to monitor project progress, identify issues, and ensure compliance with design specifications and safety standards.
  Coordinate with contractors, vendors, and suppliers to ensure materials and equipment meet quality requirements and project specifications.
  Assist in conducting quality control inspections, ensuring that installations align with engineering and regulatory standards.
  
• Documentation and Reporting:Prepare and maintain project documentation, including status reports, meeting minutes, and technical documents.
  Provide regular updates to project managers on project progress, potential risks, and any adjustments needed to stay on track.
  Support procurement activities by reviewing material specifications and participating in vendor evaluations as necessary.
  

Qualifications and Experience:

• Bachelor’s degree in Engineering (Mechanical, Civil, Electrical, or a related field).
• 3-5 years of experience in a project engineering role, preferably in [specific industry, e.g., oil and gas, construction, manufacturing].
• Proficiency in project management software (e.g., MS Project, Primavera) and CAD software (e.g., AutoCAD).
• Familiarity with industry standards and codes relevant to engineering projects.

RESPONSIBILITIES & DUTIES

• Assist the Production Manager in the scheduling of all incoming jobs and ensure close monitoring and timely delivery.
• Assist the Production Manager in taking charge of all coating (HVOF and Armoloy) jobs and ensure delegation and coordination on the necessary works.
• Understand the full requirements of all manufacturing, servicing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.
• Ensure all budgets and plans are met.
• Assist the Production Manager to monitor and manage workshop loadings, direct labour hours, overtime, rework, scrap, on time deliveries, downtime, work efficiencies and ensure all measurements are within plans.
• Attend weekly production meeting to provide status update to all relevant departments and iron out related production issues.
• Assist the Production Manager to work closely with all Production Supervisors to formulate shop floor production plans and optimize production hours and weekly planned hours ensuring on time delivery.
• Identify the skill level of each reporting employees and distribute suitable work tasks to achieve higher throughput.
• Manage and resolve grievances and conflicts arising. Motivate employees to boost their morale.
• Work with Production Manager, Engineering Manager, General Manager and HR department to develop, implement and conduct training to enhance the competency or upgrading of skills for production employees.
• Conduct annual performance appraisal for all reporting employees.
• Work closely with the QHSE Manager/ MR to resolve quality issues.
• Perform review on PCR and work closely with the sales, engineering and quality department or customer to clarify all technical specifications and job requirements.
• Assist the Production Manager in resolving bottleneck situations and determining root cause, corrections and corrective actions for internal rejection and scrap.
• Assist the Production Manager in initiating purchase requisition for any requirements.
• Assist the Production Manager in preparing monthly reports whenever required.
• Work closely with all departments to resolve any arising issues.
• Assist the procurement department to deal with external providers on all technical issues.
• Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.
• Follow safe work practices and procedures.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Participate/ attend all functions, activities and meeting organized by the company.
• Perform other assignment and duties as and when required.

Accountability

• Control, lead, develop and motivate all reports.
• Monitor and ensure on time delivery of finished product.
• Minimize rework and rejection rate.
• Work with the team to achieve QHSE objectives.
• Maintain good housekeeping at all times.
• Report all unsafe acts, infrastructure and environment to his Manager.

QUALIFICATION & EXPERIENCE

· Degree preferably in Manufacturing/ Mechanical Engineering discipline or equivalent.

· Preferably 2 years of relevant experience in the metal machining or oil and gas industries.

RESPONSIBILITIES & DUTIES

§ Understand the full requirements of all manufacturing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.

§ Perform technical review on sales order and work closely with the sales department or customer to clarify all technical specifications and job requirements on the sales order.

§ Generate PCR and manufacturing process plan.

§ Generate engineering drawings and perform drafting.

§ Support Asst. Engineering Manager on the job costing.

§ Continuously explore for new manufacturing method or new external providers to support the production.

§ Work closely with the Production Supervisor to resolve any production issue.

§ Support the procurement department to deal with external providers on all technical issues.

§ Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.

§ Follow safe work practices and procedures.

§ Ensure company and QHSE policies and procedures are adhered to at all times.

§ Participate/ attend all functions, activities and meeting organized by the company.

§ Perform other assignment and duties as and when required.

§ Welcome Fresh Gradutes

Job Responsibilities

• Involve in the analysis, design, documentation, coding, and testing of our applications
• Performing unit and integration testing
• Conducting functional and non-functional testing
• Troubleshoots production problems related to software applications
• Resolves problems and responds to suggestions for improvements and enhancements
• Evaluating current applications to update or add new features
• Ability to work independently on assigned tasks.
• Assist with project plan time estimates and ensure development milestones are met
• Performs any additional duties assigned by the immediate supervisor or senior management

Job Requirements

• Candidate must possess at least a Diploma and above
• At least 1 Year(s) of working experience in the related field is required for this position
• Required Skill(s): Well-versed in ASP.Net (MVC) and knowledge of Microsoft SQL.
• Ability to thrive in a fast-paced environment