• Research, design, and develop new circuits, technology, modules, and devices
• Strategise on architectural and electronic designs, product pipelines, and new potential technology and devices
• Identify, analyse, recommend, and develop next-generation improvements for existing circuits, technology, modules, and devices
• Conduct evaluations and recommend modifications on existing designs and prototypes based on performance in quality test and customer feedback
• Ensure reliable and consistent performance and function of existing designs for circuits, technology, modules, and devices in operating environments
• Perform circuit analysis, run simulations, create schematic drawing and PCB layouts, and produce wiring programs using respective softwares
• Design, develop, and execute testing and investigation methods / procedures for circuits, technology, modules, and devices with the use of Automated Test Equipment (ATE)
• Prepare engineering sketches and specifications, design and test documentation, product specification or Bill of Materials (BOM), and product development timeline
• Coordinate with relevant teams to ensure design manufacturability and testability
• Keep updated on technology and regulation development

Requirements:

• Good understanding of electrical engineering codes, electronic systems, component materials and safety standards
• Possess hands-on experience using design and calculation software
• Strong analytical, problem solving and conceptualisation ability
• Strong interest in technology
• Ability to think outside the box and manage complexity
• Strong team player and customer-oriented with strong interpersonal and communications skills
• Proactive, enthusiastic with “can do” attitude
• Meticulous, self-reliant and strong sense of urgency
• Committed, motivated and able to handle multiple tasks simultaneously

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.

Job Requirement

• Degree in Civil Engineering or equivalent
• At least 6 years of working experience in the related field is required
• Having experiences in LTA Project would be bonus and advantageous
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• Willing to work in site office

Responsibilities:

• Work within the Quality Group and the Package Team and liaise with all project team members, such as Engineering, SCM Document Control and Vendor Inspection Coordinator etc.
• Participate in review Material Data sheets. development and issuance of Material Requisition/ RFQ.
• Understands and ensure quality requirements in built into the RFQs and POs documents as well as all the package specific Quality Requirements.
• Review the Technical Bid documents submitted by vendor
• Engages in the review and response to the Technical Clarification on Quality related issues
• Issues Quality Bid Technical Evaluation report for each Bid Package
• Participates in PO award recommendation
• Interfaces with the Vendor Inspection Coordinator wherever source inspection is required.

Requirements:

• Degree in Mechanical Engineering.
• Minimum of 5 years’ experience in equipment procurement for oil & gas/ offshore industries.
• Possess CompEx certified (Module 11), ISO 9001:2015 Lead Auditor, NORSOK / PED requirement, ASME / ASTM / API codes, DNV-GL codes and standards and basic knowledge of NDT

Our Addresses and Working Hours:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Resposibilities:

• Receive customer enquiries through customer portal or email.
• Download, update, and monitor customer product Bill of Material (BOM), drawings, and specifications and its revisions.
• Prepare Sales quotation/proposal/tender documents during RFQ/quotation stage.
• Check and ensure compliance to all specifications prior to providing customer the proposal.
• Calculate material, machining, cladding and other associated costs to quotations.
• Ensure quotations submitted are competitive and maintain a good profit margin.
• Follow-up on proposals with clients to secure orders.
• Prepare and distribute a Sales Order Job Launch when customer awards Purchase orders.
• Project Management on active Sales Orders and delivery schedules.
• Manage and build customer relationships and improve customer satisfaction.
• Coordinate with other departments to compile and submit documentations as required (e.g. pre-production/ final product documentations, concessions/non-conformances)
• Establish positive communications with customers regularly.

Requirements:

• Diploma/Bachelor’s Degree in Mechanical Engineering or related
• Highly motivated and driven
• Strong interpersonal and communication skills
• Team player
• Analytical, resourceful, and possess problem-solving capabilities
• Willing to undertake ad-hoc project assignments and be able to multi-task
• Proficient with MS Office tools
• Knowledge/interest in oilfield components and equipment will be an added advantage

What's in it for you?

• Bespoke training and development programs
• Fun & open working culture
• Staff parties and company events
• Recreation room - pool table, karaoke system, board games, gaming consoles
• On-site gym facilities
• Accessibility (2-mins walk from MRT)

Collaborate with cross-functional teams to develop and support business applications, adhering to company and industry best practices.

Actively participates in analysis, design, coding and testing phase.

Perform maintenance and troubleshooting of issue in existing solutions.

Participates in R&D effort on new and exciting technologies.

Requirements:

Diploma or Degree in Computer Science

Minimum 1 year of hands-on experience in Web Applications development.

Skilled in C#, ASP.Net, .Net Core, MS SQL, Angular, Jquery, Flutter.

Experience in mobile app development (Flutter) is an added advantage.

Attention to details, committed and responsible with strong working ethic, able to work on tight deadlines.

Self-motivated individual with the ability to learn and develop independently in a fast paced environment.

Strong analytical and problem-solving skills and good team player with good communication skills.

The research and development engineer will focus on developing both essential perovskite solar module structures including electrical and optical properties to maximize device performance and specific commercial products using perovskite photovoltaic technologies for clients.

Key Responsibilities are listed as following:

• Research and Development: Design, develop, and optimize high-efficiency perovskite solar cells and tandem architectures, ensuring scalability and manufacturability.
• Material Science: Investigate and select perovskite materials, charge transport layers, and encapsulation techniques to enhance stability and performance.
• Device Fabrication: Develop processes for device fabrication, including solution-based and vapor deposition techniques, and ensure reproducibility at scale.
• Characterization and Analysis: Conduct comprehensive electrical, optical, and structural characterization of materials and devices, using advanced techniques like IV testing, EQE, SEM, and XRD.
• Collaboration: Work closely with multidisciplinary teams, including material scientists, process engineers, and production teams, to align R&D goals with production strategies.
• Data Management: Document experimental procedures, analyze results, and prepare detailed technical reports and presentations.
• Innovation: Stay pdated with industry trends and advancements in perovskite solar technology and propose innovative solutions for performance enhancement.

· Master’s or Ph.D. in Materials Science, Physics, Chemistry, Electrical Engineering, or a related field.

· Proven experience in perovskite solar cell research, including material synthesis, device fabrication, and characterization.

· Proficiency in thin-film deposition techniques such as spin coating, thermal evaporation, and sputtering.

· Strong analytical skills with experience in advanced characterization tools and techniques.

· Familiarity with degradation mechanisms and strategies for improving device stability.

· Excellent problem-solving skills and a proactive approach to challenges.

· Strong communication and teamwork abilities.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

• Provide pre-sales and after-sales support to all HVAC/ACMV projects.
• Manage the Service Team in executing project plans, timelines, cost preparations and resources requirement.
• Provide technical support and clarifications to the Customer Service in producing comprehensive quotations to the clients.
• Address and resolve project administrative issues that may arise during project execution.
• Liaise with vendors and suppliers to prepare necessary equipment required for the project.
• Actively follow-up and resolve customer service-related issues / concerns.
• Attend internal and external meetings with stakeholders to resolve service operational matters.
• Oversee project execution and ensure service completion are within schedule.
• Ensure off-site operations are scheduled in accordance with customers' requirements.
• Ensure customers' requirements are clearly coordinated and communicated with the Service Team.
• Conduct site survey to accurately plan and allocate manpower resources for all Service jobs.
• Ensure Service projects are in compliance with all internal and project site SQE rules & regulations.

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or related/equivalent discipline
• Experience / knowledge in RTL, C/C++ programming and verification
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours
• C++/SystemC knowledge with High Level Synthesis experience is a plus.
• Experience / knowledge in CMOS Image Sensor is a plus

Job description

• Prepare drawings for the production line & provide design information to customers upon their requests.
• Follow up on customers’ requests & requirements. Provide on-site & off-site service to customers.
• To pick up any orders for fabrication or modification from customers.
• To abide by all contractual assignments and rules and regulations in any OEM maker contract.
• Require traveling or attached to overseas assignment and will be subjected to overseas allowance.
• To follow all duties and responsibilities assigned by the management or superiors.

Requirements

• Degree / Diploma in Mechanical Engineering or equivalent
• Proficient in CAD software, preferably in AutoCad & SolidWorks
• Preferably with knowledge in Jigs & Fixtures design
• Preferably with experience in the Semiconductor industry
• 3-5 years of relevant experience

Job Description:

- Conduct product development activities, such as product system & sub-system design and integration, technical evaluation, prototype preparation / testing, test analysis and system qualification.

- Review specifications and technical requirements with clients.

- Generate product technical documents, drawings, assembly drawings and bill-of-materials.

- Provide technical support to manufacturing, quality and marketing department.

- Work effectively in a multiple department project team to ensure that project schedule, budget and quality are met.

Job Requirements:

- Degree in Mechanical Engineering.

- Knowledge in 3D modeling software such as Solidworks is an advantage.

- Able to work hands-on and manage project deliverables individually.

- An effective team play.

- Excellent problem solving skills.

OMS has built a long-standing commitment to the upstream energy industry as we manufacture and distribute products from facilities and business units around the world. We are an equal opportunity employer and process all employment applications following the relevant regulations in the countries we operate in.

We are now looking for a Product Design Engineer, with strong background in Mechanical Engineering to join the Engineering Team. The individual is responsible to prepare and generate detailed engineering work instructions and procedural specifications, provide technical support to sales function, guide and supervise junior product engineers for day to day work order preparation and perform other assigned duties as and when required. Work scope covers all OMS locations across the region.

Individuals with relevant product design experience in Conductor/Pipe Connectors, Wellhead Systems, Valves, Actuators, Choke, and/or Downhole Systems will be highly considered for this role.

Job Descriptions:

* Familiar with analytical systems such as O2, Ammonia, pH, TOC, TRC, Conductivity and etc Analyzer, and instruments (PIT, TIT, FIT, etc)

* Coordinate with internal team, vendors, and contractors to ensure smooth project execution.

* Supervise and lead Installation and Commissioning and initial calibration of various Analyzer, instruments, sensors, etc. Troubleshoot and resolve any technical issues that arise during installation and commissioning.

* Perform Electrical & Pressure Tests, Factory Acceptance Test (FAT), Site Acceptance Tests (SAT)

* Perform site commissioning for instrumentation & Control System, analytical systems and project-related jobs

* Carry out preventive maintenance and corrective maintenance of analytics systems services

* Ensure all documentation is accurate and up-to-date, technical documents, not limited to installation report, testing and commissioning report, etc

* Ensure all installations & commissioning meet customer specifications and industry standards.

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Degree in Engineering (Mechanical, Environmental, Science, Electronics/Electrical Engineering or equivalent qualification)

* Strong analytical & troubleshooting skills

* Preferably 3 - 5 years of working experience or more in the analytical instruments or related field.

* Knowledge of analyzers, instrumentation would be advantageous.

* Able to work independently and write effective good service report

* Good work experience with Hart communicator, calibration, and PLC/SCADA would be advantageous

* Good planning and time management skills to achieve job efficiency.

* Customer orientated with a positive attitude

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Description

* Perform software development and/or Cloud / Virtual / Computer programming with Systems Development Life Cycle (SDLC) methodology

* Implemenmt Cloud Management, Cloud programming, Enterprise Server / Network / Cybersecurity Architecture and databases.

* Develop technical specifications, design, coding, data security, implementation, integration, support, documentation and user guide.

* Experience in Data Analysis and Data Integration

* Handle Design and deliver end-user training and training materials

* Install, configure, troubleshoot and administration of Cybersecurity / System infrastructure/ networking / Windows servers / Disk storage / Cloud Management.

* Provide technical support and management for Server and / or Cloud Application

* Integration & Engineering services

Job Requirements:

* Diploma or Degree in Computer Science, IT or Computer Engineering

* 1-2 Years of similar working experience, Fresh graduate are welcome

* Hands on experience in developing full stack applications in Cloud Computing (AWS, Azure, etc), Cloud Management, Web Application, Computer Application, Process Control Application using, JAVA, NoteJS, Python, etc

* Good technical skills in Database Design, Windows Server, Cloud Application Management;

* Cybersecurity Infrastructure / Networking / firewall implementation and experieice

* Possess positive attitude to learn, has initiative and independent

* Strong analytical skills and able to work under tight timelines

* Strong team player with excellent interpersonal and communication skills, and the ability to work independently Pro-active and able to work in a fast pace environment and handle multiple tasks when required

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Description

1. Perform hands-on Marine/ Electrical / Mechanical / Chemical / ervice & Maintenance and Repairs of Equipment / Instruments on outdoor field, canal, undergound, confine space, underwater, marine coastal

2. Involves working onboard vessel /work boat, canal, underground, river and field sites

3. Involve in integration of instrument / computer devices, programming, setup, configuration, testing and commissioning of remote access and control application.

4. Involve in instrument calibration, knowledge in chemical reagent

5. Planning maintenance schedule and product service report / analysis report / Maintenance Report

6. Involve in Ad-Hoc assignments as and when required

7. Willingness for Standby duties or work after office hour or during weekend and Public Holiday

Requirement:

1. Possess positive attitude to learn, has initiative and independent

2. Relevant educational qualifications in Marine/ Electrical / Mechanical / Structure Engineering (Degree/Diploma)

3. Willing to do field work (outdoor sites, onboard vessel /workboat, underground, canal, water coastal, etc.)

4. Team player

5. No prior experience may also be considered.

6. Confident in Marine Environment

7. Self-driven and motivated individual with critical thinking skill

Interested applicants, please email detail resume to [email protected]

Regret to inform only shortlisted candidates will be notified

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are looking for a highly motivated and skilled Project Engineer to execute site engineering projects. This role involves managing both process and non-process-related projects, such as Technology Transfer/New Product Introductions and Capital Projects (typically <$5M). The successful candidate will ensure these projects meet safety, quality, and technical requirements while maintaining alignment with corporate and site standards.

Key Responsibilities

• Collaborate with cross-functional teams (e.g., manufacturing, facilities, engineering, process development, and quality assurance) to successfully implement engineering projects.
• Oversee all phases of project execution, including initiation, change control, design coordination, procurement, construction, commissioning, qualification, and close-out activities.
• Ensure projects comply with corporate and site engineering standards, including Environmental Health & Safety (EHS) requirements.
• Lead safety initiatives such as pre-job safety briefings, permit management, contractor risk assessments (e.g., JHAs), and HAZOP reviews.
• Act as the technical lead for site capital projects, providing oversight of design, vendor, and contractor submissions.
• Partner with document controllers to ensure timely updates and compliance with document management SOPs.
• Support document archiving in the Amgen document management system.
• Utilize critical thinking to troubleshoot and solve complex issues efficiently.
• Leverage tools such as MS Project, SharePoint, Smartsheet, and Excel for project tracking and management.
• Represent project milestones and updates in daily cross-functional meetings.
• Manage all aspects of projects, including planning, budgeting, scheduling, risk management, resource allocation, and post-project follow-up.
• Identify and address high-priority risks proactively during project execution.
• Collaborate with external stakeholders such as engineering firms, construction management teams, and vendors to ensure seamless project delivery.
• Build strong relationships with internal and external partners to foster a collaborative working environment.
• Execute multiple projects simultaneously in a dynamic, fast-paced setting while maintaining high-quality outcomes.
• Demonstrate learning agility and technical leadership by breaking down complex challenges into actionable plans.

Required Qualifications

• Master’s degree with 3 years of experience in Engineering or Project Management.
• Bachelor’s degree with 5 years of experience in Engineering or Project Management.
• Engineering background with expertise in cGMP manufacturing and utilities projects for Biotech/API plants.
• In-depth knowledge of biotech/API manufacturing processes and supporting functions.
• Certifications in Project Management and Safety (e.g., WAH Manager).
• Proficiency in commissioning and qualification of GMP equipment and automation systems.
• Familiarity with regulatory environments (e.g., cGMP, OSHA, EPA).
• Excellent communication and facilitation skills to build consensus among stakeholders.

Why join us?

• Generous Leave Policy including 3 days to care for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions? If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

- Candidate will be required to Develop, design, program, upgrade software for Crane Safety Devise – Anti-Collision System.

- Troubleshoot & maintenance of Cloud & E-Platform for ACS.

- To provide software solution for our project specific requirements.

- Staying current with modern development practices, including continuously developing new skills as needs arise.

- Degree in Computer Science/Computer Engineering/Information Technology

- 3 years of experience in system analysis, design and programming.

- Ability to develop software in Java, C++, React or other programming languages

- Familiar with Autocad, PLC Programming & HMI Programming

- Strong analytical and problem solving skills.

• Reports to Construction Manager
• Ensure all relevant permits and clearances obtained from respective agencies prior any excavation works
• Ensure all resources provided (manpower/equipment) comply with stakeholder’s requirement
• Coordination and liaison works with relevant authorities / agencies on services /stakeholder for utilities and diversion works
• Facilitate Permit-to-dig application from Client / Stakeholders
• Attend the meeting with the stakeholder/client
• Generate and handle company reports, meetings and documents required
• Propose alternative work method or other way to increase productivity
• Provide advise on appropriate measures on services / utilities protection and adopt safe work procedure to prevent damage to utilities
• Ensure the activities comply with the quality, environment, health & safety requirements

Job Requirements:

• Degree in Civil Engineering or its equivalent
• Minimum of 5 years relevant experience in road construction projects
• Possess basic understanding of Permit-to-Dig process and application
• Proficient in Microsoft Office and AutoCAD
• Attained BCSS/Confined space
• Qualified as a Licensed Cable Detector Worker (LCDW), Licensed Telecommunication Cable Detection Worker (TCDW)
• Registered Earthwork Supervisor (RES) with EMA/SPPG
• Ability to perform task under pressure and multi-task
• Hardworking and willing to learn
• Good interpersonal skills
• Past experience in LTA project (NSC) is an added advanatge
• Project: Viaducts
• Location: Woodlands

Responsibilities:

- Review technical documents and work together with sales managers to close sales

- Prepare technical calculation and commercial proposal in timely manner

- Provides technical assistance to clients relating to the design and use of products

- Maintain good customer business relationship

- Coordinate with regional partners

- Provide support to Outside Sales and work closely to achieve the sales target

- Monitor and update status of sales quotes and proposals

- Various other sales related tasks as assigned.

Requirements:

- Diploma in Chemical/ Engineering/ Mechanical/ Mechatronics discipline or equivalent

- Good understanding in Mechanical Instrumentation & Controls or Valve Automation

- Good communication, interpersonal and customer service skills

- Willing to learn and a good team player

Job Description:

•Upkeeping test lab and adherence to the lab operational requirements in accordance to the Organisation Principle PQS

•Conduct testing accordance to applicable product standards, guidelines, regulations and dormakaba Corporate Standard (DCS)

•Conduct qualification test of new product or revised component with issuing of test report and recommendations to the test findings

•Develop test scripts, issues tracking and test management

•Prepare samples and coordinate with PQS EN or certification bodies for product certifications

•Manage annual notified body surveillance testing and follow up on non-conformance cases

•Support investigations of product failures

•Actively participate and manage projects to meet deadline

•Evaluation and analysis of competitors’ products – teardown analysis, VA/VE

Job Requirements

•Diploma/Degree in engineering with minimum 2 years of experience, preferably with working experiences in production quality or test lab environment

•Good hands-on skills in hand tools and able to handle installation of fixtures/machinery with weight up to 30kg

•Possess good knowledge in failure analysis of metals and materials related products

•Experience with testing or life cycle management tools an advantage

•Familiar with CAD software is preferable

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Familiar with AUTOCAD Software.

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.