Job Scope:

• Perform routine maintenance and troubleshooting of chiller systems to ensure optimal performance and efficiency.
• Provide exceptional customer service by addressing client inquiries and concerns regarding chiller operations and maintenance.
• Diagnose mechanical, electrical, and control system issues and implement effective solutions.
• Educate clients on proper operation and maintenance practices to extend the lifespan of their chiller systems.
• Prepare and submit detailed reports outlining service activities, findings, and recommendations for future improvements.
• Execute commissioning processes for new chiller installations, ensuring systems are installed correctly and functioning as designed.
• Other ad hoc duties assigned

Job Requirement:

• Min Diploma / Degree in Engineering
• Min 2 Years experience in chiller maintenance, commissioning, or related HVAC roles

All interested applicants, please send in your resume to: [email protected]

Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Senior Mechanical Engineer requirements:

- The project is a Power Plant at Jurong Island

- Familiar with Singapore's local technical standards, and acceptance process.

- Under the age of 35.

- Speak English

- Good health and strong safety awareness, good at communication

- Obey the Mechanical department management

- Have a qualified and valid skill certificate

- At least 5 years of mechanical work experience in Singapore, preferably as a mechanical engineer at the construction site of a Chinese company.

- Able to read Mechanical Installation drawings and guide site construction work drawings.

- Have a strong sense of responsibility, can take the initiative to work, reasonable planning, comprehensive consideration of work tasks

- Can communicate with owners, subcontractors, and other departments for permits and other works

- Able to start work on short notice will be an advantage

- Mechanical engineer with working experience in gas turbine power plant is preferred

- Adapt to our company's working hours

- Subcontractor management experience is preferred, have subcontractor management ideas

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Responsibilities:

The successful candidate will be responsible for the design and development of one or more devices that are part of an integrated e-payment Fare Collection System. The successful candidate will also be involved in the software development lifecycle from definition of requirements to design and development, and testing.

The activities required to be performed shall include the following:
•Requirements gathering.
•Design and develop software applications for embedded devices.
•Implement and optimize communication protocols (e.g.TCP/IP, HTTPS, FTPS/SFTP, MQTT-S) to establish secure and reliable connections between embedded devices and on-premises/cloud platforms.
•Conduct thorough testing, debugging and troubleshooting of embedded devices to identify and resolve issues related to functionality, connectivity, performance and reliability.
•Preparation and submission of deliverables throughout the Software Development Lifecycles (SDLC) such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual,
Training Manual and others documents as required in the SDLC processes.

•Assist day-to-day application support issues.
•Liaise with users on the requirement testing and production issues.

Qualifications & Requirements:

•Degree in Electrical / Electronics / Computer Engineering / Computer Science or a relevant discipline.
•Developed software in at least one full Software Development Lifecycle.
•Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object-oriented software design and UML modelling
•Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).
•Experience in multi-threading, socket programming and serial/USB communication.
•At least 5 years’ experience in object-oriented software development.
•Familiarity with docker container development and AWS Greengrass is a plus.
•Prior experience in following areas Scrum AGILE methodology process is a plus.
•Scrum AGILE methodology process.
•Develop and integrate embedded devices with cloud platforms.
•Strong analytical and problem-solving skills.
•Good written and verbal communication skills.
•Self-motivated, independent and a good team player.

• Sales Representative / Sales Engineer (Fire Pumps)
• Working hours: 8.30 am to 5.30 pm on weekdays and 8.30 am to 12.30 pm on Saturdays
• Work Schedule: 5.5 days work week during probation and upon confirmation: 5 days a week and one half Saturday a month
• Budget Up to $5,000 (Include $800 transport allowance + phone allowance)
• Entitled to AWS + Variable Bonus
• Office Near to Farrer Park MRT

Requirements:

1. Must be familiar with fire pump and the market for fire safety. In lieu of fire pump experience, must have at least experience with marketing of water pumps
2. Preferably have technical background in the relevant field at least at ITE level in specializations like electrical engineering, mechanical engineering, mechatronics etc.
3. Technicians / engineers with knowledge of the above product who keen to switch to sales role is welcome to apply.
4. Preferably have related sales experience and able to present to customer and consultant
5. Need to have at least class 3 driving licence and own vehicle.

Job Scopes

• Grow the fire pump portfolio
• Prepare quotations and tender submissions
• Attend to sales enquiries, sales support and site related matters
• Update management on the progress of projects
• Visit customers at their work place / office
• Any related ad-hoc duties
• Opportunity to handle the full spectrum of big projects

#SCR-carson-cheong

⭕ Cheong Kar Chun ⭕ Team Manager ⭕ R1980386

⭕ The Supreme HR Advisory ⭕ 14C7279

Responsibilities:

The successful candidate will be responsible for the design and development of one or more devices that are part of an integrated e-payment Fare Collection System. The successful candidate will also be involved in the software development lifecycle from definition of requirements to design and development, and testing.

The activities required to be performed shall include the following:
•Requirements gathering.
•Design and develop software applications for embedded devices.
•Implement and optimize communication protocols (e.g.TCP/IP, HTTPS, FTPS/SFTP, MQTT-S) to establish secure and reliable connections between embedded devices and on-premises/cloud platforms.
•Conduct thorough testing, debugging and troubleshooting of embedded devices to identify and resolve issues related to functionality, connectivity, performance and reliability.
•Preparation and submission of deliverables throughout the Software Development Lifecycles (SDLC) such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual,
Training Manual and others documents as required in the SDLC processes.

•Assist day-to-day application support issues.
•Liaise with users on the requirement testing and production issues.

Qualifications & Requirements:

•Degree in Electrical / Electronics / Computer Engineering / Computer Science or a relevant discipline.
•Developed software in at least one full Software Development Lifecycle.
•Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object-oriented software design and UML modelling
•Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).
•Experience in multi-threading, socket programming and serial/USB communication.
•At least 5 years’ experience in object-oriented software development.
•Familiarity with docker container development and AWS Greengrass is a plus.
•Prior experience in following areas Scrum AGILE methodology process is a plus.
•Scrum AGILE methodology process.
•Develop and integrate embedded devices with cloud platforms.
•Strong analytical and problem-solving skills.
•Good written and verbal communication skills.
•Self-motivated, independent and a good team player.

Job Description

• Industry/ Organization Type: Manufacturing/Electronic Components and Boards
• Position Title: R&D Engineer
• Working Location: Bedok
• Working Hours: Monday – Friday, 8.15 AM – 6.15 PM
• Salary Package: Basic Salary up to $4,000 + Transport Allowance + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Researching electronic components and designing new products to meet market needs.
• Supporting the complete R&D project life cycle and participating in all phases from concept to manufacturing through designing, prototyping, validation, and production of R&D products, taking into account the functionality, feasibility, quality, manufacturability, costs, and completion time.
• Giving concise and informative demos/presentations to other team members or product managers about design concepts.
• Finalizing a design and its deliverables to facilitate a smooth transition to the relevant stakeholders.
• Preparing product documentation like the bill of material, material specification, and process documentation.
• Evaluating processes and design improvements.
• Coordinating with the Global R&D team.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Bachelor’s Degree in Engineering or Technology (Electrical/Electronics) or equivalent
• Has a minimum of 2 years of experience with passive electronic components design
• Has understanding and work knowledge of AutoCAD Electrical
• A good understanding of product safety, environmental testing, and electromagnetic compatibility (EMC) will be advantageous

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69868 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description:

• Must be a Diploma/Bachelor's Degree holder.

• Hands-on implementation experience in building full-stack Restful web Applications.

• Experience in the following domain area/Technology/Programming languages

• Communication/Data Protocols: Modbus, OPC UA/AD, IEC 101/104, TCP/IP, SFTP, MQTT, AMQP

• Programming languages: JavaScript, Python, C/C++, SQL

• Experience in Linux, Docker, PostgreSQL, And Firewall management

• Experience in Code Management and Deployment

• Certified in Microsoft Technologies will be an added advantage

• Knowledge in Azure Devops, Azure IOT and Azure sphere will be an added advantage.

Roles and Responsibilities:

• The candidate will be responsible for designing and implementing data acquisition solutions and systems that meet the requirements of our clients.

• The successful candidate will be expected to have strong problem-solving skills and be able to troubleshoot and debug complex issues.

• The candidate will also be responsible for developing and maintaining documentation for solutions, including design specifications and test plans.

• End user support
• Assist in Operating Systems Migration and related support.
• Support, troubleshooting, diagnosis of hardware and software problems.
• Handle all problems associated to End User Equipment and Software.
• Installation of software/application.
• Provide accurate and timely documentation in IT Service Management Tool.
• Closing all assigned and resolved Incidents; focus on ticket resolution within SLA.
• Synchronizing application settings to environment requirement.
• Relocation of computer devices and peripherals.
• Setting up of the end users profiles for applications.
• To guide, update and follow up to end users.

Job Requirements

• Diploma in Information Technology, Computer Engineering, Electronics or related field
• At least 1 year of relevant experience
• Knowledge in IT Hardware
• Monday to Friday (9am to 6.30pm) work near Raffles Place MRT
• Bank working enviroment
• Salary $2700 to $3000
• Start work immediately or within short notice

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

JOB RESPONSIBILITIES

* To assist and support the Project Manager in handling and monitoring the progress of projects to ensure that work on site is on schedule

* To liaise and co-ordinate project site works with consultants, vendors/suppliers and sub-contractors

* Liaise and work with sub-contractos on shop drawings, equipment submission, site inspection and testing & commissioning matters

* Carry out site supervision and ensure work done on site is fully complied with specification and drawing

* Follow-up closely with sub-contractors on the progress of site works

* Ensure all work activities are carried out in a safe working environment

JOB REQUIREMENTS

* Degree or Diploma in Mechanical/Electrical Engineering or relevant disciplines from recognised institutions

* Min 5 years of working experience involving ACMV and M&E works in the construction industry

* Able to plan and co-ordinate M&E works and shop drawings

* Able to identify and follow-up site issues with the project team and sub-contractors

* Able to work independently and under tight schedule

Description

• Responsible for taking over the project from tender / sales team for execution
• Prepare PEPL’s Scope of work and create project schedule based on the scope - document submission list, material submission list, material lead time, installation and testing period
• Create Document submission & Material submission list and prepare submissions
• Design & review the drawings and documents for timely submission to customer
• Monitor submissions & follow up with customer for timely approval of the documents & material submissions
• Prepare Purchase Requisitions for purchase of necessary project materials on time and coordinate with purchase team and our subcontractor / supplier
• Plan the construction site manpower requirement together with Superintendent
• Coordinate with Superintendent / Construction Manager / Site supervisor for site work activities installation, testing & commissioning and progress report
• Maintain & update Project schedule regularly and prepare Weekly / Monthly Progress report for internal & customer
• Participate in regular customer meetings & proactively manage customer expectations by preparing necessary submissions / agenda / minutes of meeting etc.
• Manage the project cost within allocated budget
• Maintain Change Order Log and proactively manage change in scope. Prepare RFI / VOR and get VO from customer before executing the scope change.
• Prepare Progress Claims timely and follow up for approval and maintain Progress Claim Summary report
• Escalate challenges / issues to the Project Manager & management to resolve it on time
• Collaborate with Customer, Consultant, Owner, Third Parties, Suppliers & internal team members for successful project execution
• Organize & coordinate for Factory Acceptance Testing (FAT) of necessary equipment
• Perform pre-punch list walk thru with PM and Superintendent
• Clearing of punch list defects in collaboration with site team
• Prepare & provide training to customer for necessary equipment (as applicable)
• Responsible to collect all Handover & completion documents
• Manage & Comply with Workplace Safety & Health for project execution
• Organize necessary safety training for the project & site team members
• Comply with the PQP document for project execution

Requirement

• Diploma/Degree in Electrical Engineering or related studies
• More than 3 years of project management experience in related field
• Experienced in handling multiple projects
• Possess effective organizational and follow-up skills, meticulous
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Responsibilities

• Coordinate with internal team in Singapore liaise with customers / consultants on day to day basis
• Preparation of project documents including BQ
• Handling Design & Build projects
• Prepare optimised design solutions for projects
• Prepare Design drawings (Single Line Drawings & layout)
• Prepare design calculations incl voltage drop, short circuit current etc.
• Support multiple M&E projects concurrently
• Lead project meetings and work with team members to achieve the deliverables on-time
• Ensure drawings & documents are well maintained & stored in a timely manner
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Electrical Engineering
• Minimum 2 yrs of relevant hands-on M&E experience in construction industry, LTA projects, mixed development etc
• Need to be familiar with Singapore codes such as SS638 (CP5), SS650, SS555 etc
• Hands-on experience in AutoCAD drawings is preferred
• Familiarity in BIM (Revit / Navisworks) is advantageous
• Having consultancy experience is preferred
• Possess effective organizational and follow-up skills, meticulous
• Good communication skills
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Project Engineer (Mechanical / Electrical Engineering)

We are currently seeking a highly organized and detail-oriented individual to join our team as a Project Engineer. In this role, you will be responsible for overseeing and managing various engineering projects from conception to completion. You will work closely with cross-functional teams to ensure projects are delivered on time, within budget, and meet the required standards.

As a Project Engineer, your role will involve analysing project requirements, developing project plans, conducting feasibility studies, and coordinating project resources. You will also be responsible for monitoring project progress, identifying potential issues, and implementing corrective actions when necessary. Additionally, you will collaborate with external stakeholders, such as clients and contractors, to ensure effective communication and successful project outcomes.

To excel in this position, you must possess strong project management skills, technical expertise, and excellent problem-solving abilities. You should be able to work well under pressure and manage multiple projects simultaneously. Exceptional communication and interpersonal skills are also essential for effectively collaborating with various stakeholders.

Responsibilities

• Develop and implement project plans based on project scope and objectives
• Conduct feasibility studies and perform risk assessments to ensure project viability
• Coordinate and allocate project resources, including personnel, materials, and equipment
• Monitor project progress and ensure adherence to timelines, budget, and quality standards
• Collaborate with cross-functional teams to identify and resolve project issues
• Conduct regular project meetings to provide updates, discuss challenges, and make decisions
• Prepare and present project reports, including status updates and performance metrics
• Maintain effective communication with clients, contractors, and other external stakeholders
• Good knowledge or certified in WSH.

Requirements

• Bachelor's degree in electrical/electronic/mechanical engineering with 2 years of experience
• Excellent communication and interpersonal skills, both verbal and written in English.
• Good skills in using MS Office application and AUTOCAD
• Proven experience in project management, preferably in an engineering or construction setting
• Strong knowledge of project management methodologies and tools
• Solid understanding of engineering principles and construction processes
• Exceptional problem-solving skills and the ability to think critically.
• Strong organizational and time management skills with the ability to prioritize tasks effectively.
• Ability to work well under pressure and meet tight deadlines.
• Detail-oriented and able to maintain a high level of accuracy in all work activities.
• Excellent team player with the ability to collaborate effectively with cross-functional teams.
• Professional certification in project management is a plus.
• Familiar with relevant WSH certification courses for commercial and industrial areas.

• Assist to manage IT functions including hardware maintenance, software application and hardware upgrades, data migration and system installation. Provide hardware support for printers, monitors, Desktop PCs, Laptops, smartphone devices.
• Work with the team to plan and execute the selection, installation, configuration and testing of Company’s IT Hardware.
• Manage, maintain and back up company’s IT network and desktop systems on a regular basis.
• Identify, investigate and research user questions and problems as well as isolating and resolving information systems problems.
• Manage/participate in new setup or upgrade of systems, and monitor system utilization.
• Perform problem management (analysis for frequently occurred incident – solve root cause) and troubleshooting of network operating problems, desktop applications, hardware cause identification and resolution.
• Maintain and up-keep IT equipment inventory and documentation, in compliance with IT policies and procedures. Responsible for hardware and software licensing and compliance.
• User management and general support of application systems and work closely with application and infrastructure teams.
• Any other ad-hoc duties as required by the company from time to time.

Requirements

• Degree in Computer Science/Information Technology or related discipline.
• 3-4 years of prior experience (Previous experience working in technical support role (user and system support), within a Microsoft environment)
• Proficient in setting up Windows 2016/2019 servers with good knowledge in hardening and securing of Wintel systems.
• Competent in the administration of Active Directory, Group polices, DNS, DHCP.
• Competent in supporting Windows 10/11 OS, Microsoft 365 services, and other common desktop applications.
• Relevant experience in the installation and administration of VMware ESXI and vCenter.
• Relevant experience in configuring and troubleshooting firewalls and network switches. Sound knowledge of networking concept or CCNA certification would be beneficial.
• Good knowledge of PowerShell/Batch scripting.
• Good knowledge of identifying security related issues such as computer viruses, worms, and spyware.
• Ability to relate to users from all levels to understand users’ requirements and balance with system capabilities.
• A good team player as well as ability to work independently.
• Enjoy providing both phone and face support.
• Possess a strong customer-focused attitude.
• Willing to work beyond office hours or on weekends to support occasional maintenance or operational needs.

Electrical Engineer (Satellite, Radio Frequency)

The Electrical Engineer is required to attend to pre-sale electrical matters and provide suggestions on project specification and give calculation on the amount of electricity consumption.

Responsibilities:

• To conduct and lead design reviews for Radio Frequency/ Satellite, Network communication systems.
• Responsible for SATCOM/Micro Wave system and network configurations, acceptance, interface and performance testing and commissioning of SATCOM/Microwave systems.
• Understand contractual and project requirements and specifications, propose and generate (SATCOM/MW) system architecture and designs.

Requirements:

• Good in handling Electrical Engineering skills and provide calculation on electricity consumption.
• Ability to calculate on the amount of Electricity required.
• Expert in electrical engineering.
• Good in handling Single diagram and sizing; SLD
• Responsible in handling Electrical Input and output of the equipment and Sizing of electrical equipment
• Good in handling Modulators and Voltage regulator
• Experience in handling Low noise amplifier and Electrical wiring.
• Good in handling Electricity Calculation, Drawing, Design and management of electrical specification with cost and time line.
• Strong knowledge of Radio Frequency, Microwave, Satellite (Satcom) and Microwave.
• Diploma/Degree in Electronics/Electrical Communication Engineering.
• Experience in handling Radio Frequency/ Satellite and Network.
• Proficient in operating RF and electronics test and measuring equipment such as signal generator and spectrum analyzer
• Experience in Satellite/Microwave Communications and Network is an added advantage.

We respect your privacy and all communication will be treated with confidentiality.

If you have meet the job requirements that we are looking for or wish to find out more on this role, please contact us or apply in-confidence to us with your updated resume in MS Words format to : [email protected]

*Only shortlisted candidate will be notified.

Lee Kelvin No. R1872625)

STAR CAREER CONSULTING PTE. LTD (EA License: 20C0353)

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

The TikTok Account team provides identity and access related services to TikTok and TikTok ecosystem businesses (Ecommerce, Business, Music, Live). We are building Account as a foundation service to empower business innovations.

As a product and platform team, we build robust and reliable systems to facilitate the company's various directions, also proactively facilitate user account access growth and security. We are facing engineering challenges across scalability, reliability, security and system performance, as well as a wide variety of business challenges.

On this team, you're a big-picture thinker and strategic team-player with a passion for doing what’s right.

Responsibilities:

1. Design, test, deploy and maintain backend services and core components of distributed systems.

2. Conduct system designs and code reviews.

3. Collaborate with other engineering teams to elevate technology and consistently apply best practices.

4. Constantly evaluate and improve efficiency, scalability, and stability of our systems.

Qualifications

Minimum Qualifications

1. BS degree in Computer Science, Electrical Engineering, Computer Engineering or related areas.

2. Experience in one or more programming languages such as Go, Java, C++, Python etc.

3. Abilities to quickly ramp up on new technologies, tools and domain knowledge.

4. Experience in backend server development and database solutions.

Preferred Qualifications

1. Good problem-solving, analytical thinking capabilities and exceptional attention to details.

2. Good communication and collaboration skills.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Job Description:

1. Design, build, and deploy back/front end software applications using C# and Typescript (or JS).
2. Employ LINQ for data interaction and process optimization.
3. Oversee Microsoft SQL databases, carry out SQL programming tasks, and enhance system performance.
4. Engage in all stages of the Software Development Life Cycle (SDLC), including requirement gathering, design, coding, testing, deployment, and maintenance.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers

Requirements:

• Bachelor’s Degree in Computer Science, Information Technology or Mechatronics or equivalent
• Demonstrable experience (at least 2 years) in software development.
• Profound knowledge of C#, LINQ, and Angular. Experience with Microsoft SQL database programming using Entity Framework & SignalR.
• Acquaintance with the Software Development Life Cycle (SDLC).
• Familiarity with OPC-UA and Industrial 4.0 technologies is advantageous.
• Exceptional problem-solving abilities and meticulous attention to detail.
• Excellent communication skills and a strong team player.

about company

I am currently working with a software consultancy firm that provides premium software development and strategy expertise to a wide spectrum of clients. Projects are about Gaming/Gambling/Blockchain.

Salary structure: Base + AWS + variable bonus. 2 rounds of interview process. Hybrid working arrangement. Office at CBD.

about job

• Develop, construct, test and maintain data architectures such as databases, data warehouses and large-scale data processing systems

• Design and develop data pipelines/systems for data modelling, mining and production

• Make raw data clean and highly available for use in descriptive and predictive modelling

• Recommend and implement ways to improve data quality, reliability, flexibility and efficiency

• Ensure data assets and data catalogs are organized and stored in an efficient way

• PL/SQL and SQL Tuning and optimization

skills and requirements

• Min 3 years in data architecture, data warehousing, data processing, data modelling and ETL/ELT, familiarity with real-time streaming solutions

• Experience in Kubernetes-based DevOps practices, with experience in container orchestration, CI/CD pipelines, and microservices deployment.

• Experience in database development (Oracle SQL/PLSQL)

• Working experience in AWS cloud environment, familiar with solutions such as EC2, S3, EMR, Redshift, Athena, Kinesis • Programming knowledge in Python, R, SQL for data cleaning, processing and aggregation

• Mandarin speaking required as you need to liaise with Chinese counterparts who can only speak and write in Mandarin

To apply online please use the 'apply' function, alternatively you may contact Stella at 96554170 (EA: 94C3609 /R1875382)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

At TikTok, our people are humble, intelligent, compassionate and creative. We create to inspire - for you, for us, and for more than 1 billion users on our platform. We lead with curiosity and aim for the highest, never shying away from taking calculated risks and embracing ambiguity as it comes. Here, the opportunities are limitless for those who dare to pursue bold ideas that exist just beyond the boundary of possibility. Join us and make impact happen with a career at TikTok.

Our team is responsible for providing TikTok search users with first-class search experience by building a strong and robust infrastructure and platform to support product fast iteration and key feature development. In our team, you'll have the opportunity to take part in developing the key features on TikTok Search, understand how TikTok Search could be evolved to be a multi-billion-user product and first-handed experience how user request varies on this giant from time to time. We encourage a culture of self-driven, intellectual curiosity, openness and problem-solving.

Detailed responsibilities include but not limited to:

1. Product Development: Support fast iterations of TikTok Search business and further enable the product growth.

2. Performance & Stability: Build a fast and robust Search product by keeping optimizing system performance and improving service stability.

3. Search Engineering Infrastructure: Guarantee reasonable Search architecture governance to ensure that the overall system operates smoothly.

4. Search offline processing: Construct a high freshness multi-media index and provide a reliable offline data support for Search Engine.

5. Backend engineering team building, management and development.

Qualifications

Job Requirements

- BS degree in Computer Science, Computer Engineering, or other relevant majors.

- Excellent problem-analysis and -solving skills, have industry experience in building backend services for large-scale consumer-facing applications.

- Good at coding, data structure and basic algorithm

- Good team communication and collaboration skills.

Preferred Qualifications

- Good understanding on how modern Search system is built or/and how modern Search product should be evolved.

- Industry experience in building a consumer-facing Search product.

- Experience in building a medium-size backend technical team from scratch.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Job Description

• Industry/ Organization Type: Security System Service Provider
• Position Title: Project Engineer (IT)
• Working Location: East (Nearest MRT: Tai Seng)
• Working Hours: 5 days (Monday-Friday, 9 am to 6 pm)
• Salary Package: Up to SGD 3500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Set up equipment for various systems and conduct testing and commissioning.
• Install electronic systems, including cabling and storage devices.
• Perform troubleshooting, repairs, and preventative maintenance on electronic systems.
• Manage projects and follow up with clients.
• Provide onsite support to diagnose and resolve technical issues.

APPLY NOW!!!

• Min. Diploma in IT or Engineering field
• Min. 1 year of working experience in Project Management or related field
• Familiar with Windows, Word, PowerPoint, Excel, and Access

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66287 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Purpose: Responsible for establishing process steps to produce in-house-made parts and meet customer expectations concerning quality, lead time, cost, and technological needs. Process Engineer drives improvements in process methods to enhance performance and output.

Key Area of Responsibilities:

• Establish process steps to produce in-house-made parts and meet customer expectations in terms of quality, lead time, cost, and technological needs, without compromising health and safety.
• Create process routing (work instructions) & BOM in BaaN, and prepare an Inspection Method Sheet (IMS)/checklist.
• Read and interpret 2D drawing, 3D model and customer specifications on drawing.
• Ensure process routing is ready for both the first article and volume production.
• Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
• Monitor process performance (quality, cost, lead time) and yield using tools (e.g.: SPC).
• Monitor First Article (FA) progress and resolve technical issues in a timely manner to ensure smooth production flow from FA to volume production.
• Drive improvements to process methods to enhance performance and output.
• Take accountability in leading special projects and processes, treating it like a specialist in the identified process assigned by a superior.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 3 years of working experience in the precision machining industry.
• Strong knowledge of manufacturing processes
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Problem Solving and Continuous Improvement

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Planning Engineer /Project Engineer/Project Manager

- Civil / Building / Interior Design Project Coordinator

Senior Project Engineer (Civil/Building) - $4.5K-$6.5K

Visit https://ourengineers.com to apply or submit your CV for more job opportunities.

Develop, maintain and manage working relationships with clients and all related parties.

Manage and implement overall project.

Coordinate with Project Manager on project matters

Supervise and provide advice to junior Project Engineer(s)

Check working drawing, identify discrepancies for resolution

Keeping track on variation and claims of contract

Perform project cost review on a regular basis and on identified areas.

Plan and manage project schedule to ensure timely delivery.

Perform incoming inspection on project materials delivered on site by suppliers or vendors.

Site coordination with subcontractors, supervisors and clients.

Ad-hoc duties as assigned by superior(s).

Job Requirements

Degree in Civil & Structural Engineering (Certificates must be recognized by PE Board).

Possess skills, knowledge and ability to supervise and manage project effectively

Independent, resulted-oriented and self-driven team player with good communication skills

Class 3 driving license will be added advantage.

Asst Project Manager/Project Manager ($5.5K-$7.5K)

Reporting to senior management, you will have overall responsibility for the effective implementation and successful completion of construction projects undertaken by the Group within schedule, cost and quality.

You will liaise closely with subcontractors, architects, consultants and authorities.

Set guidelines and provide expertise and supervision to the team.

You will effectively manage each phase of the project from design to completion and ensure efficient use of resources and enhance cost-effectiveness.

Requirements

Candidates must possess a Degree in Civil Engineering with at least 5 years relevant working experience in a managerial position.

Other pre-requisites are excellent team spirit, strong technical competence, good interpersonal skills and with a "can-do" attitude.

Planning Engineer (Civil/Interior/Building) Responsibilities

· Developing and preparing Tender Plans, Pre-construction programs / Labor Histograms .

· Develop Baseline Program including EPS, OBS, WBS, Phasing / Zoning Strategy Plan and Key Dates/ Milestones, of the project assuring that the Program is fulfilling all the contractual requirements.

· Detailed Planning & scheduling for various stages of the projects that involved works related to various disciplines such as Contracts, Engineering ,Procurement and Construction

· Assigning Recourses to the project, monitoring the resources allocation and taking actions if there are any conflicts or peaks.

· Developing Cost Breakdown Structure and produce the project cash flow, making sure that the project is always within the budget / Cost control.

· Proactively monitoring the overall Work progress & Contractors Performance.

· Review the progress status reports of all the contractors on board.

· Prepare and issue monthly reports of project progress.

· Update & Monitor the overall Baseline Schedule & Key Dates.

· Preparation and updating of S-Curves, Resources Histogram and monthly Cash Flow.

· Managing the program’s Resources Histograms, monitoring the progress against Planned Figures and realized benefits as the program progresses.

· Responsible for supporting the Senior Project Manager, highlighting the areas of concerns, Issues or order to take corrective actions and implementing the preventive actions in order to avoid similar issues in the future.

· Review of major scope changes, ensuring that any impact on time is assessed.

· Responsible for assessing time extension requests and provide recommendations against the same.

· Travel to the site offices for visiting the projects / updating the progress when its needed

· Preparation of Time Impact Analysis

· Recognised qualification in Building Services Engineering or other appropriate engineering subject is preferred. Candidates without formal engineering qualifications may be considered if they have acquired sufficient experience (minimum 4 years in the role of a relevant construction management position) to demonstrate competence in the skills necessary to fulfil the role.

· Membership of professional body preferred

· Computer literate – Prima Vera/Microsoft Office

· 4 years of industry relevant experience

Project Coordinator

To manage projects by supervising and coordinating the site activities

Monitoring of work progress, attending project meetings, liaising with clients and consultants

Assist Project Manager in carrying out all shop drawings, method statements submission

Ensures the timely preparation of project progress reports, inspection records, handover records, defects list etc.

Record all defects of works, ensure proper documentation for all variation orders and others

Ability to complete and hand over projects within tight timeline and quality expectation

To make pro-active response on site problems and resolved immediately with the Project team

To ensure all aspect of QA and QC matters

Observe proper construction safety measures and ensure safety compliance at site

Requirements:

Minimum Diploma Holder or other relevant qualifications

Min 3 years of relevant working experience in interior fit-out works or construction field is required

Able to work independently and under tight schedule

Good project coordination and management skill

Able to read architectural & technical drawings thus translates to construction activities

Good working knowledge of MS Office and Outlook

Visit https://ourengineers.com to apply or submit your CV for more job opportunities.

Job Description

• Industry/ Organization Type: Security System Service Provider
• Position Title: Project Engineer (IT)
• Working Location: East (Nearest MRT: Tai Seng)
• Working Hours: 5 days (Monday-Friday, 9 am to 6 pm)
• Salary Package: Up to SGD 3500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Set up equipment for various systems and conduct testing and commissioning.
• Install electronic systems, including cabling and storage devices.
• Perform troubleshooting, repairs, and preventative maintenance on electronic systems.
• Manage projects and follow up with clients.
• Provide onsite support to diagnose and resolve technical issues.

APPLY NOW!!!

• Min. Diploma in IT or Engineering field
• Min. 1 year of working experience in Project Management or related field
• Familiar with Windows, Word, PowerPoint, Excel, and Access

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66287 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694