Job Description :

• Responsible for all the handshake tests, writeup creation, demo arrangement, sample graphic submission, ICONICS license handling, server arrangement.
• Responsible for Writeup and GUI preparation, Backend development monitoring, server arrangement.
• Designing network architecture, VLAN, network switches and firewall selection, server selection, procurement on network devices, IP assignment, rack assignment, rack power calculation and UPS selection, port assignment
• Monitoring project progress, attending to technical discussions, providing technical support, arranging Software requirement (EMS and MMS), implementing Smart solution
• Getting quotations, PR arranging, PI arranging with BM team, product delivering, attending technical discussions, project progress monitoring, resolving issues
• Selection of licenses, getting quotation from HQ, approving PR, optimizing license requirements, distributing license keys, holding all the license details for past and current projects
• Contacting ICONICS support team, raising tickets to clarify issues, updating status of the issues, arranging monthly meeting with ICONICS, meeting minutes creating and sharing, distributing details of critical fixes, testing new requirements
• Referring technical specs, providing server and license requirement, attending to tender meetings
• Creating and amending technical guidelines for ICONICS, G5, third party integration, graphic creation, project management, D&A, network designing, license selection, server selection, training manual

Requirement :

• Candidate must possess Diploma or Bachelor's Degree in Mechatronic or Electrical & Electronic Engineering
• Possess good interpersonal and communication skills
• Positive working attitude with pleasant personality
• Knowledge of C++/ Phyton/ PLC is needed
• Knowledge in HVAC systems, SCADA software, Building Management systems would be an added advantage

We regret that only shortlisted candidate(s) will be contacted.

• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings, and other documents prepared for the different stages of a project.
• Supervise the installation, testing, and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Correspond with project experience acquired and individual competency in technical knowledge/skills, project management, and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognized by the Professional Engineers Board, Singapore
• Registered with the Professional Engineers Board, Singapore.
• Minimum 3 years of relevant experience in Mechanical engineering design for building services and infrastructure works. Those with more than 5 years of relevant experience may considered for a Senior role.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational, and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You are responsible for identifying, assessing and advising on risks arising from the workplace health, environmental and/or work processes, recommending measures to eliminate or minimize and control the risks and implementing the measures.

Key Responsibilities

• Conduct job and environment hazard and risk assessments, perform workplace evaluations, and implement corrective and preventive actions
• Apply relevant licenses, conduct tests and provide necessary inspection reports on environment and safety to drive improvement
• Lead and continually review existing and new Fab processes and equipment for EHS compliance, including managing waste, air, water, chemicals, gas and others
• Manage semiconductor process safety, establish Environment, Health and Safety (EHS) culture, implement and enhance the EHS program for employees and contractors
• Perform regular and ad-hoc inspections. audits and supervise hazardous operations safely
• Lead and facilitate ERC (Emergency Response Committee) related activities such as factory emergency response, fire, gas leak and others
• Collaborate with relevant departments for ISO14001, ISO45001, ISO14064, and ISO50001 management systems certification and compliance
• Provide technical, regulatory and process guidance to address emerging EHS issues

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Engineering or Science background including Occupational Safety, Chemical Engineering or Chemistry, environmental science and emergency response or management
• Minimum of 3 years of experience in semiconductor, electronics manufacturing, or other chemically intensive manufacturing industries and regulatory compliance preferred.
• Possess industrial safety, environmental protection, and fire protection related certificates
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months

Key Skills and Attributes

• Strong analytical skills and able to work under pressure in a fast-paced environment
• Good interpersonal, leadership and communication skills to work effectively across functions and geographical teams with diverse background
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible for successful customers’ product full lifecycle, including but not limited to, technology transfers, new products introduction, device performance, yield, and reliability of our advanced technologies

Key Responsibilities

• Take charge for successful new products qualification and technology transfers from motherfab
• Complex data analysis to identify process design weaknesses and/or manufacturing tool issues.
• Design and execute experiments, analyse complex data sets and derive actionable insights to improve yield and performance for each specific technology and/or products
• Collaborate with the engineering teams to maintain process stability and provide technical solutions to customers

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 4 years of experience in silicon process flow enhancements and managing process shifts, changes with design rules and product layout, ensuring optimal yield, electrical test and product performance with short-and long-term reliability implications considerations
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

Responsibilities

Prepare project management plan and its sub-plans, such as: work scope statement, schedule plan, manpower plan, tools and equipment plan, procurement plan and OHSE plan

• Provide engineering support in project or plant maintenance • Coordinate internal and external audit review

• Engineering calculations associated with current carrying capacity of cables, wires, fuses and other circuit protective devices.

• Procedures for inspection, testing and certification of electrical fixed installations.

• Industrial hazards, safety and health precautions, and environmental concerns.

• Installation practice and regulations, and relevant codes of practice.

Requirements & Professional Skills•

Min. Diploma in Electrical Engineering or equivalent

Min. 0-1 year of relevant experience in electrical work

Responsibilities

• Undertake detailed design in Building Structures
• Execution of projects and liaison with the Client, Client’s Consultants, Contractors, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Prepare design report & attend meeting to resolve technical issue

Requirements

• Degree in Civil and Structural Engineering or its equivalent that is recognized by the Professional Engineers Board of Singapore
• Well versed with local authority codes and regulations
• Minimum 4 years of relevant building structure with civil experience
• Involve in large scale building (HDB/ Condominium/ Commercial) structural design project
• Good exposure in the analysis and design of PPVC, Precast and concrete structures, steel structures
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

We regret that only the shortlisted candidates will be notified

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Good interpersonal and communication skills

Job Description:

• Lead metal Additive Manufacturing process, materials and application development and service projects, including material selection, part design, parameterization, prototyping and manufacturing of AM parts
• Scoping, managing, and executing of customer projects within budget and schedule, ensure deliverables, objectives and customer requirements are met
• Provide technical consultation and support to customer enquiries relating to metal AM application
• Operation of metal AM machines and auxiliary equipment, including maintenance, troubleshooting, risk assessment, and managing of AM lab
• Documentation of project reports, engineering reports, technical data, process know-hows; development of SOPs and best practices for AM equipment and processes
• Support market promotion and customer engagement; participate in local or overseas industry exhibitions, tradeshows, conferences, and seminars; facilitate lab tours, demos and presentations
• Provide technical content to support creation of marketing collaterals such as demo parts, product videos, whitepaper, etc.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers
• New hire is required to undergo specific tests for who are exposed to certain occupational hazards.

Requirements:

• Bachelor's Degree / Master / PHD in Engineering, Mechanical, Materials, Aerospace or equivalent
• Min 5 years of working experience with metal Additive Manufacturing process and application development
• Hands-on experience with LMD/DED machine operation
• Proficient in data preparation, CAD/CAM and toolpath generation for LMD/DED process
• Strong understanding of LMD/DED process, materials, and key process variables
• Experience with parameters development, material characterization, or process simulation
• Familiar with metal AM process chain
• Keen on hands-on work
• Fast learner and agile, able to adapt to dynamic work environment
• Able to work independently and self-motivated

SPECIFIC RESPONSIBILITIES:

• ensures all drawings, bills of materials, purchase requisitions and quality checks are completed as per project schedule and ISO 9001 & 14001 processes.
• conducts design reviews to analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• confers with customer representatives to review specifications and answer questions pertaining to installation of systems.
• supports during manufacturing, assembly, de-bug, and customer buy-off.
• writes technical reports, manuals and technical support documentation
• performs a wide variety of additional functions to meet project schedules and product deliveries
• reads, understands, and acts upon mechanical drawings including piece part and assembly drawings, work instructions, and procedures
• determines manufacturing methods, techniques, and procedures as required to perform tasks as required for to ensure designs perform as required
• designs test fixtures and setups as needs arise
• communicates with vendors to support procurement and to address issues
• Responsible for any other role as assigned by the Project Manager

QUALIFICATIONS & EXPERIENCE:

• Diploma or Degree in Mechanical / Manufacturing Engineering or an equivalent degree in related technical field desired
• 3 to 5 years relevant experience in mechanical engineering and material handling systems across various industries.
• AutoCAD and solid works proficiency
• Knowledge of design techniques, tools, and principle involved in production of precision technical drawings, and models
• Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to design and production
• Knowledge of design principles, steel and aluminum part creation, sub assembly and pneumatics.
• Ability to work independently in designing and liaising with customers on technical specifications and requirements
• Participate in and effectively communicate in group discussions and meetings
• Ability to work well in a team environment
• MS Office proficiency

Roles & Responsibilities

The responsibility of this position is to lead the project assigned to successful completion within the project schedule & scope as well as obtain the targeted profit and achieve high customer satisfaction.

The incumbent shall carry out the following responsibilities, but not limited to:

• Resolve complex issues with clients & consultants, JV partners, and/or sub-contractors which are not able to be handled by subordinates.
• Direct project team members to achieve targets of safety, quality, profit and timely completion of the project. To monitor the progress of the project according to the targets set.
• Identify key staff to lead the project and delegate responsibilities. Provide guidance and direction to staff for them to work towards the targets set.
• Personnel management and development.
• Oversee the tender works including providing directions on planning, construction technique, quality of tender submission documents, risk and issue management, tender price negotiation with suppliers and subcons for finalization.

Requirements:

• Candidate must possess at least a Bachelor's Degree majored in Civil Engineering recognised
• Minimum 6 years of local experience in construction industry
• Experience in Road Works / Building Works Project will be preferred
• Proven working experience in project management
• Excellent client-facing and internal communication skills
• Independent and organised with positive work attitude
• Possess strong written
• Good decision maker and team player
• Auto Cad designing
• Class 4 with Forklift licence

Their duties and responsibilities include:

• Preparing and interpreting blueprints, technical drawings, and plans
• Collaborating with architects, contractors, and other construction professionals
• Planning, directing, and managing the site workforce and subcontractors
• Ensuring that all building procedures and materials comply with building codes, regulations, and standards
• Carrying out surveys and assessing the suitability of construction sites
• Performing quality control tasks on budgets, plans, materials, and the final product
• Inspecting and reviewing projects to monitor compliance with building and safety codes, and other regulations
• Assessing potential risks and drafting mitigation plans
• Providing technical advice and solving problems on site
• Ordering and managing resources and materials to meet project deadlines
• Preparing reports regarding job status and progress to stakeholders

Responsibilities:

· Design and coordinate assigned Civil and Structural projects.

· Perform structural analysis and design in building or on any structures as required by the project.

· Liaise with clients & consultants to meet C&S requirements.

· Coordinate to ensure civil and structural requirements meet project tender, submission and construction schedule.

· Assist Project Director to manage and provide guidance to Design Engineers

· Provide Technical Leadership

Requirements:

· Good degree in Civil / Structural Engineering from a recognized University.

· Minimum 5 years working experience in Civil & Structural consultancy firm

· Strong technical background

· Fully conversant with Singapore Codes of Practice, Eurocodes and structural programs such as STAAD, TEKLA, ETABS, RAPT, etc

· Ability to work independently.

· PE will have advantage

1. Minimum 5 years of experience in the supervision of structural & architectural works. Experience in commercial and / or institutional projects will be an advantage

2. Relevant experience in Bored piles, RC works and structural steel works.

3. Relevant experience in architectural building works, ID finishing fit out works and coordination.

4. Must be fully conversant with Building Control Act and Regulations.

5. Possession of a valid practicing certificate from ACES/IES for RE and Bachelor degree in Civil Engineering

Responsibilities:

· Design and coordinate assigned Civil and Structural projects.

· Perform structural analysis and design in building or on any structures as required by the project.

· Liaise with clients & consultants to meet C&S requirements.

· Coordinate to ensure civil and structural requirements meet project tender, submission and construction schedule.

Requirements:

· Recognized degree in Civil and Structural Engineering.

· Minimum 3 year of local relevant working experience.

· Conversant with structural programs such as STAAD, TEKLA, ETABS, RAPT would be advantages.

· Ability to work independently.

· Assist Project Manager

Our client is transforming the cleaning industry with advanced robotic solutions that tackle manpower challenges. Their innovative robots are already making a difference in 30 countries! As they continue to grow, they are seeking a Production Engineer to join their team.

Key Responsibilities:

• Design, implement, and optimize manufacturing processes to enhance efficiency and product quality.
• Troubleshoot and resolve production issues, identifying root causes and implementing corrective actions.
• Ensure production processes comply with quality standards and regulatory requirements.
• Drive continuous process improvements using Lean, Six Sigma, or other methodologies.
• Collaborate with cross-functional teams to meet production goals and improve operational performance.
• Develop and maintain standard operating procedures (SOPs), work instructions, and project documentation.
• Perform data analysis and reporting, including FMEA, testing reports, and BOM management.
• Support the introduction of new products or production techniques, ensuring smooth transitions.

Requirements:

• Bachelors degree in Mechanical, Industrial, Manufacturing Engineering, or a related field.
• 2-5 years of experience in a manufacturing or production environment.
• Comprehensive understanding of manufacturing processes, techniques, and materials.
• Proficiency in CAD software and familiarity with ERP and MES systems.
• Excellent technical writing skills (SOPs, work instructions, FMEA, testing reports, project documentation).
• Strong problem-solving abilities and experience with Lean, Six Sigma, or similar continuous improvement methodologies.
• Strong communication and teamwork skills.
• Ability to manage multiple projects and meet deadlines effectively.

Interested candidates are invited to send in your Resume in MS Word Format stating your past work experience, reasons for each leave, past and expected remuneration.

We regret to inform that only shortlisted candidates will be notified.

By submitting an application to us, you will be deemed to have agreed for us to collect, use, and disclose your personal data which you have submitted to your prospective employers, for the purpose of job search, and/or other services which you have consented us to perform on your behalf.

Attn: Woo Gu Ming (R24123795)

Cultivar Asia Pte Ltd (MOM EA License: 19C8782)

Job Description & Requirements

Job Responsibilities:

Supervise architectural works and ensure all works are carried out in compliance with standards, safety & environment regulations
Coordinate with Civil/Structural and M&E parts to handle technical issues
Attend meetings about progress, technical issues, etc for architectural works with all relevant parties
Arrange inspections by Consultants and other relevant authorities, if necessary
Assist to Architectural RI inspection
Plan and Manage Architectural work progress scheduling

RequirementsMinimum 5 years of experience with Degree/Diploma in relevant architectural field in the construction supervision of architectural works for projects
LTA / Building experience will be beneficial
Relevant experience in construction company
Good knowledge of structure and architectural details

We require an experienced Engineer for our ACMV division.

Job Scope

1)Project Planning and Project execution including documentation and budgeting for Service,Repair and Installation Costing

2) Installation/ Service and Repair on the following brand and systems

1. GUNTNER
2. SABROE
3. MUNTERS
4. EVAPCO

3) Material procurement for project

4) Liaise with clients on projects

5) Complete vendor evaluation

6) Supervise at site for installation and safety compliance

6) Testing and commission for ACMV systems

Job Requirements

1) Degree in Engineering or Equivalent

2) At least 8 years of work experience in projects wit focus on ACMV

3) Speaks English well to communicate to clients

4) Proficient in Microsoft Word, Excel

5) Experience in Projects for ACMV

Site Engineer specialising in post-tensioning, structural repair, bearing replacement, and heavy lifting plays a critical role in assisting project manager in specialized construction projects within these domains. This role requires independence, strong multitasking abilities, technical aptitude, cost control skills, scheduling proficiency, and a commitment to safety and quality.

Key Responsibilities:

1. Independent Work:

· Demonstrate the ability to work independently on assigned tasks and projects.

· Take initiative in problem-solving and decision-making within your areas of responsibility.

· Seek guidance from senior engineers when necessary and report progress regularly.

2. Multi-tasking:

· Manage multiple tasks and responsibilities across various construction projects.

· Prioritize tasks efficiently to ensure timely project progress.

· Adapt to changing project conditions and address emerging challenges effectively.

3. Method & Technical:

· Develop and apply construction methodologies and techniques specific to post-tensioning, structural repair, bearing replacement, and heavy lifting.

· Collaborate with senior engineers to understand and implement project-specific technical requirements.

· Participate in specialized construction tasks independently and under supervision.

· Troubleshoot technical issues and contribute to solution development.

4. Cost Control:

· Assist in preparing project budgets and cost estimates, seeking guidance from senior team members.

· Monitor project expenses and proactively identify potential cost-saving opportunities.

· Support procurement activities related to materials and equipment.

· Participate in contract management tasks for subcontractors and suppliers.

5. Schedule & Program:

· Collaborate with senior engineers to develop project schedules and programs tailored to specialized construction activities.

· Independently update and maintain project schedules to ensure timelines and milestones are met.

· Identify scheduling conflicts and propose potential solutions.

· Facilitate communication and coordination within project teams.

6. Safety & Quality:

· Adhere to and promote safety protocols and standards specific to specialized construction tasks.

· Participate in safety assessments, identify potential hazards, and report findings to senior team members.

· Assist in implementing quality control and assurance measures to meet project specifications.

· Support quality assurance teams in inspections and documentation of compliance.

Qualifications:

· Bachelor's degree in Civil Engineering, Structural Engineering, or a related field.

· Strong self-motivation and the ability to work independently.

· Basic knowledge of construction techniques, equipment, and materials.

· Interest in developing project management skills, including cost control and scheduling.

· Familiarity with safety regulations and a dedication to maintaining safety in construction practices.

· Effective communication skills and the ability to collaborate within project teams.

· A proactive attitude, a strong work ethic, and the willingness to take ownership of tasks.

A Junior Construction Engineer in this specialized role serves as an integral team member, contributing to the successful execution of complex construction projects. Independence, multitasking abilities, technical skills, and a commitment to safety and quality are key attributes for success in this role, with a focus on post-tensioning, structural repair, bearing replacement, and heavy lifting projects.

Candidates are expected to:-

• Take lead of the shipboard engineering department and engineers in the maintenance, operations, and repairs of the vessel’s mechanical and electrical systems, equipment, and installations;
• Ensure seaworthiness and readiness of the vessel’s mechanical and electrical systems, equipment and installations in accordance to voyage schedule;
• Plan and maintain inventory of spare parts, fuel, and lubricating oil;
• Take charge of emergency drills and situations related to the vessel’s mechanical and electrical systems, equipment, and installations;
• Develop and control plans for the maintenance of technical installations and equipment throughout the vessel;
• Deploy vessel staff in close consultation with the Chief Mate and Second Engineer;
• Appraise the performance and potential of the vessel's staff in accordance with established company procedures
• Ensure the vessel has sufficient freshwater supply for the voyage;
• Oversee bunkering procedure and liaise with relevant stakeholders for the delivery of bunker vessel;
• Ensure compliance to all local, national and international environmental laws relating to maritime safety, pollution, and domains where applicable; and
• Perform survey work in accordance with Classification Society regulations.

The ideal candidate must:-

• Possess a valid Certificate of Competency (Marine Engineer Officer) Class 1; and
• Possess at least 3 years of experience as a Chief Engineer onboard a container vessel.

• Oversee the continuous operation of the organisation’s IT Infrastructure, including networks, servers, email security and backup systems.
• Develop and implement strategies to enhance infrastructure resilience, particularly for planned maintenance and power outages.
• Lead cybersecurity initiatives, including the development and execution of phishing simulations and cybersecurity awareness programs.
• Act as a liaison to facilitate IT related communication across departments, adapting technical information for non- technical stakeholders.
• Provide technical support and guidance to employees across all levels, ensuring efficient problem resolution and minimal disruption to daily operations.
• Continuously research and evaluate new technologies and solutions that can drive efficiency, enhance security and support the organization’s evolving needs.
• To support Digitalisation Transformation team members in the areas of IT/ OT cyber security measures including assessment of project scopes, budgetary and proposal.
• To be trained to maintain up-to-date knowledge of the IT Security industry, including awareness of new or revised security solutions, security standards, trends/best practices, offensive techniques and tools.
• Perform other tasks as assigned by the supervisor.

Education/ Experience/Skills

• Minimum Diploma qualifications ( e.g. NIE, SIM, LaSalle-SIA, NAFA ) or equivalent.
• Minimum 2 years’ of experience in Computer Science.
• Knowledge in ERP system like Microsoft Navision is an added advantage

Job Highlights

• Good Salary Package, Performance Bonus, Allowance
• 5 Day Work Week
• SAFE Working Environment

Job Description

Responsibilities

• Break new grounds and penetrate the key industries as in; Food Packaging, Medical, Petrochemical, Chemical, Pharmaceutical, Semiconductor etc.
• Undertake the role to develop new and key accounts and strive towards achieving sales goals and objectives.
• Propose improved materials or products to customers and explain the benefits of the changes.
• Engage the customers on a day-to-day basis to initiate and coordinate sales activities.
• Preparation of sales proposal, quotations and attending customer’s enquiries
• Responsible for Sales target for Singapore region.
• Track and report sales activities; submit reports promptly.
• Be competent to undertake hands-on related issues arising from aftersales including onsite trouble-shooting.
• Create sales leads, follow up on sales opportunities and take ownership to follow up on quotations.
• Contract review prior to order entry – Evaluate and interpret customers’ specification against our offer. Clarify with customer where necessary to resolve unclear requirements. Be responsible to coordinate with Order Administration team on shipment update and information going back to the customer up to the point of delivery.
• Working closely with customers to find application possibilities and propose suitable technical solutions.
• Conduct competitive analysis and identify market price for various suppliers and market segments in Singapore.
• Conduct product and application training if necessary.
• All other ad-hoc duties as assigned by the company.

Requirements:.

• Degree/Diploma in business, marketing, engineering or any relevant field.
• 1 to 2 years of sales engineering experience.
• Excellent communication, sales, and customer service skills.
• Salary depends on experience.
• Prefer with vehicle ownership.
• Self-motivated and ability to work in a team or independently with minimum supervision.
• Meticulous, organized and great interpersonal skills.
• Cheerful and pleasant personality.
• Excellent written and verbal communication skills.
• Able to converse and write in English and Mandarin.
• Mandarin language will be an advantage to communicate with Mandarin-speaking clients and suppliers occasionally.
• Computer literate, knowledge of Microsoft Office software. Outlook, Word, Excel and PowerPoint is a must.
• 2 years contract subject to convert full time staff.

Job Type

2 Years Contract

Cohesive working environment

Flexible working arrangement

Growing Team with Development Opportunities

Competitive Commission

Exposure to new developments and tooling improvements

Job Responsibilities:

 Identifying customers’ needs and engineering adaptations of products, equipment, and services.

 Prepare and deliver equipment presentations explaining products or services to existing and prospective customers

 Communicate with customers and engineers to assess equipment needs and to determine the requirements.

 Collaborate with sales/admin team to understand customer requirements and provide sales support

 Secure and renew orders and arrange delivery

 Recommend improved materials or equipments to customers, showing how technology changes or increase productivity

 Offering after-sales support services

Requirements:

 Required own transportation

 1-2 Years working experiences preferred

 Entry level candidates are welcome to apply

 Familiar / Experience in Survey Equipments will have added advantage

 Training on products will be provided

 Works well under pressure

Duties & Responsibilities:

IT Infrastructure

• Windows server configuration and support
• Experience in configuring and troubleshoot Firewalls, Switches, network routing and WIFI Access Point to maximize network efficiency and security
• Maintain and updating network equipment to the latest firmware releases
• Experience in Office 365, Teams, One Drive and SharePoint support
• Cloud experience in Azure and Amazon Web Services (AWS) would be an added advantage
• End-user, computer and software support
• Knowledge of SD-WAN technology
• Regional countries remote support is required

Technical Talent Specialization

• Good knowledge on Windows servers and routing protocol
• Preferable those possess CCNA / CCNP / CCIE / CompTIA Network & Security
• Good knowledge on Firewalls (Palo Alto)
• Good understanding of LAN/WAN and TCP/IP networks
• Good knowledge on Azure or AWS cloud technology
• Good knowledge on Office365

Experience & Skill-set required:

• Diploma/Degree in Computer Engineering/Science, Information Technology or related field or a combination of education and experience
• At least 5 years’ experience in IT networking support related experience
• Strong IT Technical understanding and a hands-on person
• Fast learner and able to adapt to frequent changes in business environment
• Able to multi task, work independently and prioritize workloads effectively
• Team player

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are looking for a skilled Process Engineer to design, implement, and optimize processes. Key responsibilities include reviewing process design documents, participating in safety and design reviews, managing change control, vendor relations, and quality risk assessments. You will oversee commissioning, qualification, and validation activities while ensuring HSE compliance. Additionally, you'll troubleshoot process issues, manage deviations, and provide SME input. Collaboration with stakeholders, SOP generation, and completing training on time are essential for success in this role.

Key Responsibilities

• Lead Process Design: Develop and review key process design documents (P&IDs, PFDs, URS, data sheets) to ensure optimal system performance and compliance.
• Drive Safety & Design Excellence: Contribute to safety and design reviews (3D models, HAZOP, DQ) to guarantee robust and safe process designs.
• Manage Project Changes: Oversee site and project change control, ensuring smooth transitions and effective execution of process improvements.
• Vendor Relationship Management: Cultivate strong vendor partnerships, ensuring timely and high-quality deliverables.
• Engage in Quality Risk Assessments: Actively participate in risk assessments to enhance process quality and minimize operational risks.
• Review & Approve Documents: Ensure all relevant technical documents are thoroughly reviewed and approved, maintaining high standards.
• Monitor & Report Progress: Track and report the status of assigned projects and tasks, ensuring transparency and alignment with timelines.
• Coordinate Field Work & Commissioning: Lead and coordinate field work, including commissioning, qualification, and validation activities, ensuring smooth implementation of processes.
• Champion Health, Safety & Environment (HSE): Take full ownership of HSE responsibilities in your designated area, ensuring strict adherence to safety standards.
• Solve Process Issues: Troubleshoot and resolve process-related issues, applying your expertise to maintain smooth operations.
• Manage Deficiencies & Deviations: Effectively address any deficiencies or deviations, working proactively to resolve them.
• Provide Expert Input: Offer Subject Matter Expert (SME) input as needed, driving improvements and operational excellence.
• Support SOP Creation: Contribute to the development and refinement of Standard Operating Procedures (SOPs) to streamline operations.
• Collaborate with Stakeholders: Coordinate with key stakeholders to ensure alignment and successful project outcomes.
• Ongoing Learning: Complete required training on time, keeping up to date with the latest tools, technologies, and industry standards.

Required Qualifications

• Minimum Degree in Engineering or Science Disciplines
• Minimum 3 years’ experience in a related field / Pharmaceutical Industry
• Proven track record in following and promoting Safety in all aspects of your role
• Strong process and automation knowledge, adequate knowledge in utility and HVAC
• Project management / coordination experience
• Proactive and self-motivated
• Adequate knowledge on cGMP and other regulatory requirements, guidelines and industry best practices
• Be IT literate and familiar with Microsoft office suite of applications
• Demonstrated proficiency of written and verbal communication skills in English (including technical writing and presentations) with ability to communicate and collaborate effectively with technical and senior management staff

Why join us?

• Generous Leave Policy including Elderly Care Leave for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions?
If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.