Job Description & Requirements

UTILITY ENGINEER (LTA Tunnelling Construction)

- Report to Site Mgr/Construction Mgr/Coordination Mgr/PM/PD

- Provides coordination of construction of the project t pertaining to the utilities.

- Ensure the project needs are met without compromising the reliability of the utility system

- Ensure all utility documents are properly submitted and filed

- Conduct routine site inspections to ensure adherence to relocation plan

- Review project documentation from consultant for compliance with all relevant regulations, codes, guidelines and policies

- Schedules and attends all necessary and related pre-construction conferences for utility relocations

- Reviews utility relocation plans as compared to project construction plans to identify and correct potential utility conflicts prior to construction

- Coordinate with engineering and design consultants in order to find the best solution cost-frame time

- Liaise with construction manager to ensure that the utility work supports construction sequencing and respective deadlines are met and on schedule

- Resolve site inquiries, attending site meetings and performing site inspections during construction

EDUCATIONAL QUALIFICATION:

- Minimum Diploma/ Degree in Engineering technology

EXPERIENCE / SKILL REQUIRED

- Must have at least 5 years of engineering working experience in the relevant field (ideally with LTA projects)

- With 2 years experience in the Coordination with utility agencies for similar projects

- Good interpersonal and communication skills and able to interact with people of all levels

- Experience with utility design or utility construction activities (gas, water, sewer, telecom)

- Experience in coordinating and scheduling installation of utilities

Conduct primary technical reviews of the contractors work and ensure approvals are obtained where relevant

Evaluate and advise on electrical related design changes and non-conformances to ensure fulfilment of the requirements

Identify new business opportunities and have involvement in bids/tenders etc

Provides guidance and direction on department design guides, standards, systems, applicable engineering codes and policies

Independently applies knowledge and complies with quality program relative to assigned tasks

Oversees collection, assimilation, and management of data for engineering work

May offer other services to the clients

Provide electrical engineering and technical expertise to ensure the safe and reliable operation of electric power systems in processing facilities worldwide

Originate plans and develop strategies for power systems worldwide to ensure electrical reliability and safety in the most cost effective manner

Participate in engineering design through all phases of the process

Preparation or supervision of drawings for plant general arrangements, power single line diagrams, cable block diagrams, instrumentation loop diagrams, P&IDs, control system architecture drawings, and cable, instrument and I/O schedules at detailed design level.

Some electrical design will also be required for integration and system development of electro-mechanical systems

Assist in design and documentation of vehicle electrical architecture

Develop Project Timelines in support of Program milestones

Development and Release of Engineering Component and Assembly Drawings

Resolve Test Issues and Document Through the use of the PDCA Process

Test and certification report generation

Provides electrical engineering and project management expertise in support of projects, to ensure stated quality, operational, safety, schedule and budget objectives are met

Provide training to electricians on safety

Ensure complete and current electrical prints for all machines

Maintain documentation for all electrical components used

Organize documentation and electrical prints

Design Circuit Card Assemblies (CCA) using Altium Designer for Schematic, and layout

A working knowledge of cost estimating, code review, field investigation, report and memo writing and other similar electrical engineering related tasks

Power distribution, essential power systems including generators and UPS, Substations, transformers, metering, primary and secondary switchgear, motor control and motor control centers Life Safety including Fire Alarm system design

Prepare reports, proposals, and tender/bid submissions, budgets, project plans and other supporting documentation as required

Develop standards related to our electrical engineering practice, ensuring best practices for project delivery, and when applicable sustainable building constructions

Lighting, Lighting Control systems.

Manage internal and external stakeholders - Support and run the commercial and contractual side of projects

Evaluates and test components

Ensures design, fabrication, maintenance and repair methods/processes are developed executed in a manner, which supports all quality standards

Develops, designs low voltage (600V) and medium voltage (15kV) and high voltage (115kV) electrical distribution systems for building, industrial and utility facilities

Performs electrical system design for switchgear, switchboards, motor control centers, variable frequency drives, generators, transformers, distribution panels and various raceway systems

Designs underground medium voltage distribution systems and sizes electrical low voltage (600V) and medium voltage (15kV) and high voltage (115kV) equipment

Serves as the Engineer of Record for drawings, specifications and reports prepared under their direction

Performs field investigations, field inspections and witnesses start-up/acceptance testing activities

Works effectively in a collaborative environment with Architects, Mechanical Engineers, Civil Engineers and Structural Engineers on large multi-discipline projects

Coordinates with Mechanical, Fire, Architecture, Structural and Civil disciplines for comprehensive building design or modification.

Provide instruction on electrical drawing and using AutoCAD electrical

Work with PCB Fabrications houses to develop the stack-ups, dieletric materials, routing guidelines, and any Design For Manufacturing (DFM) suggestions

Write AFCEs

Determine project specifications

Compare equipment and select manufacturer

Work with on-shift maintenance personnel to find and fix problems on down equipment

Engineer solution to fix root cause and prevent recurring failures

Create and conduct training, if required, to prevent future downtime

Design equipment upgrades to optimize machine performance

Estimate total project costs and estimate project payback

Responsible for designing, testing, supporting, and troubleshooting components of low-voltage and medium-voltage electrical systems operating up to several megawatts

Develop system-level and/or physics-based models of components and devices in support of new technology development, project engineering, and test & evaluation

Develop and/or improve the test methods and procedures

Write test procedures and technical papers

Responsible for the design, analysis, and testing of advanced power electronic systems for both military and commercial applications

Will lead and direct small technical teams (engineers, designers and technicians) in solving complex problems

Responsible for writing requirements, specifications, and design reports

Act as an expert and advisor in power electronics engineering and electrical engineering area

Advises and directs the activities of assigned programs and/or projects to achieve technical objectives

Responsible for digital and analog design with power electronics emphasis and must be able to do system level design and analysis

Requirement:

Degree in Electrical and Electronics Engineering.

Knowledge of international codes & standards IEC, ANSI / IEEE

Significant experience in the power generation industry strongly desired

Prepare Electrical Engineering deliverables such as calculations, equipment specifications, datasheet

Working knowledge of “AutoCAD” or equivalent CAD system, MS Project, and MS Office

Track record of launching high volume electronics products, especially low power platforms

Knowledge of the PCB design process and tools experience with Cadence or Altium products

Proficiency with EE lab instruments and their use in verification and troubleshooting

Experience with ODM, JDM, or CM models of product development

Self-starter and creative problem-solver

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes. Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernising key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernisation.

Logicalis Group has an annualised revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

As we continue to grow as a business, our people are our key differentiator with our competitors, and developing and retaining our talent is a key priority for all of our businesses.

Accountabilities:

• Understand the customer’s network structure and become familiar with the Customer’s network implementation and support processes and procedures to ensure supporting a network with proper SLAs.
• Carry out migrations of existing setup, features, and configuration as required by the customer in a production/testing environment and help improve plans to implement new features to increase the network stability or user requirements.
• Perform IOS upgrades and patches to fix software and ensure that the environment is bug/vulnerable free by keeping system with up to date software.
• Troubleshoot production issues and network problems to fix any user related issues and work with principal vendors and customer to provide the resolution with in the proposed timelines.
• Raise equipment Return Material Authorizations (RMA’s) and to track till problem resolution and produce incident report for any severity issues that was reported by customers or end users.
• Be available for customers’ questions in assisting their needs to support network related issues and monitor customer network leveraging appropriate monitoring tools as well for special scheduled activities performed during non-business hours or public holidays due to system upgrades.
• Perform the wireless testing across customer’s different locations and identifying or fixing if there are any performance issues or slowness in network for wireless users.
• Identify the principal vendor best practices and only perform changes with customer approval to improve the security levels.
• Co-ordinate between his/her own Global Network Centre for any escalations or major issues and bridge between customer / senior resources / vendor / etc

The Individual and their Experience:

• Minimum 2-3 years of relevant experiences in network operations including wireless technologies.
• Hands on experience in fixing user issues in production environment is essential
• CCNA certified plus any other networking certifications preferred
• Basic understanding about Routing / switching protocols.
• In-depth knowledge on Stacking / L2 technologies / STP / IP Addressing.
• Proficient at performing local / remote IOS upgrades on different products and RMAs for faulty devices in production
• Good understanding about different monitoring tools like Cisco PI / PRTG / Spectrum / Syslog / etc and TCP/IP structure and IP scheme
• Strong knowledge on Wireless / ARP / MAC / L2 loops / Switching.
• Understand DNS / DHCP / Security knowledge is an added advantage.
• Eagerness and willingness to pick up & adapt new technologies and automation.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Job Description & Requirements

• Working hour: 9am – 6pm (Mon – Fri)

• Variable Bonus + Excellent Welfare

• Well Established Equipment Manufacturing Company

• On-Job-Training Provided

(Two-way company transport provided from Jurong East Mrt)

Job Descriptions

• Build and install offshore generator/fire pump systems;
• Onsite planning and managing of installation teams, sub-cons;
• Supporting assistant to project manager and ad-hoc;
• Project Management, including effective cost, time and quality control, manpower planning, Material Take Off & etc
• Overall project schedule and expertise to meet project objectives and deliverables;
• Involve in negotiation with subcontractors and suppliers with commercial personnel where necessary;
• Liaise with clients and consultants on project requirements and attending meetings;
• Complete assigned projects on schedule and within budget;
• Identify any potential safety risks within projects and putting in place strategies to mitigate any risks;
• Prepares for engagement reviews and quality assurance procedures;
• Ensure that Health, Safety and Environmental Safety standards are met;
• Supervision of project engineers and other project team members;
• Ensure smooth delivery of the project completion/site commissioning

Requirements:

• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechatronics), Engineering (Mechanical), Engineering (Electrical/Electronic) or equivalent.
• Minimum 5 years as Project Engineer in oil & gas industry, Energy industry and must have experience in M&E
• Completed medium sized projects from start to finish
• Previous project experience in relevant fields e.g. offshore projects, marine projects etc.
• Commercial knowledge
• Offshore general Safety Course for Project Manager
• Managing Work at Height Course
• Workplace Safety and Health Risk Management Course
• Possess high level of integrity, good interpersonal and strong leadership skills.
• Good communication skill
• Knowledge in energy modelling software (PVsyst), Autocad and construction modelling software
• A team player who is results and customer oriented, independent, creative, and passionate about energy generation
• Singaporeans/PRs only.

Interested and suitable candidate kindly click quick apply. Resume will be routed to HR Department. We regret that only suitable candidate will be notified.

Resident Engineer

Available job sites at various locations:

- Ang Mo Kio

- Jurong West

- Bugis

- Hougang

-West Coast

Description:

-To assist Qualified Person (Supervision) in ensuring the works is carried out in accordance to approved drawings

- Manage a team of Resident Technical Officer(s) in performing their duties on site supervision

- Liase and conduct inspection with Contractor and Consultant

- Oversee all aspects of the project and keep record of works, materials, attend meetings, keeping minutes of meetings and discussions etc.

Requirements:

- Accredited as a Resident Engineer with IES/ACES

-Degree in civil and structural engineering from a University accredited by the Professional Engineers Board, Singapore

-Literate in English and have a good knowledge to use computer softwares. E.g. Microsoft office

-Experience in LTA project sites would be a plus

Summary

Responsible for designing, developing, and maintaining automated systems to enhance production efficiency and accuracy. Strong analytical and problem-solving skills are essential.

Responsibilities

• Design, develop, and implement automated systems to improve production efficiency and accuracy.
• Work closely with cross-functional teams to identify automation opportunities in manufacturing and assembly processes.
• Program and maintain PLCs, robots, and other automated equipment.
• Develop user-friendly interfaces and dashboards for monitoring and controlling automated systems.
• Conduct troubleshooting, debugging, and performance tuning for automated equipment.
• Stay updated on advancements in automation technology to recommend and implement innovative solutions.

Requirements

• Recognized degree in Mechanical Engineering, Electrical Engineering, or Automation Engineering.
• At least 5 years of experience in industrial automation, including hands-on experience with PLCs, robotics, and sensors.
• Proficiency in programming languages such as Python, C++, or ladder logic for PLCs.
• Knowledge of Industry 4.0 principles and IoT integration.
• Strong analytical and problem-solving skills.

1. JOB DESCRIPTION

Job Title

Sales Engineer

Occupation

Sales & Marketing Engineer

Job Description & Requirements

Job Description:

We are seeking a highly motivated and skilled Mechanical Sales Engineer to join our team. As a Mechanical Sales Engineer, you will be responsible for driving sales and promoting our mechanical products and solutions to customers in Singapore. Your primary focus will be on developing new business opportunities, managing customer relationships, and achieving sales targets.

Responsibilities:

1. Develop and implement effective sales strategies to promote mechanical products and solutions.
2. Identify and target potential customers, including conducting market analysis and research.
3. Build and maintain strong relationships with existing and new customers, ensuring customer satisfaction.
4. Collaborate with the engineering team to provide technical support and product knowledge to customers.
5. Prepare and deliver professional sales presentations and demonstrations to potential clients.
6. Negotiate and close sales deals, ensuring profitable business growth.
7. Monitor market trends and competitor activities to identify new business opportunities.
8. Collaborate with the business development team to develop and execute sales plans.
9. Provide regular sales reports and updates to management.

Requirements:

1. Diploma in Mechanical Engineering or related field.
2. Proven experience in technical sales, preferably in the mechanical industry.
3. Strong customer relationship management (CRM) skills.
4. Excellent negotiation and communication skills.
5. Ability to analyze market trends and identify business opportunities.
6. Knowledge of mechanical engineering principles and products.
7. Demonstrated ability to achieve sales targets and drive business growth.
8. Proficient in presentation skills and delivering persuasive sales pitches.
9. Self-motivated and able to work independently as well as in a team.
10. Singaporean citizenship or valid work permit.

If you are a dynamic and ambitious individual with a passion for sales and mechanical engineering, we invite you to apply for this exciting opportunity. Please submit your resume, along with a cover letter highlighting your relevant experience and achievements.

We are seeking a skilled and motivated Middleware Engineer to design, implement, and maintain middleware solutions that enable seamless integration between applications, services, and systems. The ideal candidate will have a deep understanding of middleware technologies, system architectures, and enterprise integration patterns. You will collaborate with cross-functional teams to ensure the performance, reliability, and scalability of middleware platforms.

Key Responsibilities:

1. Middleware Design & Implementation:Design and deploy middleware solutions to support enterprise application integration.
   Install, configure, and manage middleware technologies, such as WebLogic, WebSphere, Apache Kafka, or Oracle Fusion Middleware.
   
2. Integration & Automation:Develop and implement integration solutions using APIs, messaging, or event-driven architecture.
   Automate middleware deployment, monitoring, and maintenance using scripting or orchestration tools.
   
3. Monitoring & Troubleshooting:Monitor middleware performance and ensure high availability and reliability.
   Diagnose and resolve middleware-related issues in a timely manner.
   Conduct root cause analysis and implement preventive measures.
   
4. Security & Compliance:Ensure middleware solutions are secure and compliant with organizational policies and standards.
   Apply patches, updates, and security configurations to middleware components.
   
5. Collaboration & Support:Work closely with application developers, system administrators, and DevOps teams to align middleware solutions with business needs.
   Provide technical support and training for middleware technologies.
   
6. Documentation:Maintain accurate and comprehensive documentation for middleware configurations, processes, and standards.
   

Required Qualifications:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Proven experience as a Middleware Engineer or in a similar role.
• Hands-on experience with middleware technologies (e.g., IBM WebSphere, Apache Kafka, Oracle WebLogic, or similar).
• Strong knowledge of enterprise integration patterns, API management, and service-oriented architecture (SOA).
• Proficiency in scripting languages (e.g., Python, Bash, or PowerShell).
• Familiarity with cloud platforms (e.g., AWS, Azure, Google Cloud) and containerization technologies (e.g., Docker, Kubernetes).
• Excellent troubleshooting and problem-solving skills.

Preferred Qualifications:

• Certifications in relevant middleware or cloud platforms (e.g., AWS Certified Solutions Architect, Oracle Middleware Certification).
• Experience with CI/CD tools (e.g., Jenkins, GitLab CI/CD).
• Knowledge of database systems and SQL.

Key Competencies:

• Strong communication and interpersonal skills.
• Ability to work independently and collaboratively in a team environment.
• High attention to detail and commitment to delivering quality solutions.

Role & Responsibility:

• Set design requirements based on information from internal teams and user research.
• Identify new product improvement opportunities.
• Analyze how a new product satisfies business needs and user preferences.
• Modify and revise existing designs to meet changing customer preferences.
• Work closely with product engineers to suggest improvements for products and processes.
• Present product design ideas to cross-functional teams
• Help development teams create components by ensuring its built according to design and interaction specifications.
• Maintain the design system, create, and update documentation, and library components.
• Establish design standards and principles accompanying the design system for scalability, efficiency, and consistency.

Skillset Requirements

• Proven experience in all phases of the design process including user research, copywriting, wireframing, prototyping, visual design, interaction design, and usability testing.
• Proficiency and mastery of standard design tools (Figma, Sketch, Adobe CS and XD).
• Demonstrable experience in building design systems, component libraries, and/or UI Kits.
• An intuitive eye for customer needs beyond the obvious.
• Excellent attention to detail.
• Ability to collaborate with cross-functional team members.
• Ability to collect and interpret both qualitative and quantitative feedback.
• A well-rounded portfolio of client work, demonstrating a strong understanding of client objectives.
• Ability to effectively communicate and persuade around design concepts.
• Passion for design, not satisfied with the status quo and always thinking of ways to improve.
• Creative problem-solving skills.
• Dynamic, creative personality, effective at engaging and influencing a variety of audiences.
• Provide assistance to product engineers when needed.
• Recommend new tools and technologies by staying abreast of the latest trends and techniques.

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Roles & Responsibilities

• Site & office project management and daily operations including inspections, handover, site measurements, project management.
• Handling technical and engineering issues.
• Overall project planning, scheduling, monitoring and updating to meet project completion targets.
• Liaison and meeting with client's representatives, relevant authorities and consultants.
• Site co-ordination, monitoring and report work progress.
• Responsible for timely submission of reports and completion of projects including tender/submission with target dates
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of projects
• Conduct site check on the repair works in building structures, in accordance with approved methods and procedures proposed by the Qualified Person, specifications and instructions.

Requirement:

• Degree or Diploma in Civil/ Structural Engineering or equivalent
• Incumbent with working experience on Singapore LTA / Rail project preferred
• Possessing 2 years of working experience in the related field will be advantageous.

Job Description

• Liaise with clients to identify and define project requirements
• Coordinate between authorities, management and relevant stakeholders on project implementation
• Liaise/ negotiate with suppliers and sub-contractors
• Carry out sit surveys and submitting proposal for cabling works, project planning, etc.
• Develop or update project plans including information such as objectives, technologies, schedules, costing, and staffing
• Monitor and manage project milestones and deliverables
• Inspection of inventory to ensure working conditions of machines and equipment
• Monitor store inventory, carry out stock take and ensure quality control of project materials
• Ensure project claims are carried out in a timely manner and projects are closed successfully
• Report project status, such as budget, resources, technical issues, customer satisfaction, etc.
• Utilize industry best practice, techniques, and standards throughout the project execution

Requirements

• At least 3 years of experience in telecommunication/ fiber related fields (OSP & ISP)
• Possess at least a diploma in any engineering field
• Possesses a Class 3 driving license
• Able to commit to a 5.5-day work week

We value all applicants and thank you for your interest. However, please be advised that only shortlisted candidates will be contacted.

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Role

As our Sales Engineer, you will play a vital role in the company’s revenue growth through obtaining new sales from existing and new customers, as well as maintaining strong business relationship with customers.

Your Calling

· Plan and carry out sales activities (quotation, price negotiation, delivery, etc.)

· Hunter role need to exploring new potential customers and obtain new businesses

· Execute sales and marketing strategies to improve/increase sales revenue

· Liaise with customers and address their feedbacks/issues

· Establish and maintain strong business relationships with existing and potential customers

· Provide sales and technical/engineering support to customers

· Prepare and deliver technical presentation to explain and promote company’s services

· Keep track of orders and ensure timely delivery

· Monitoring competition by gathering current market information on pricing, delivery lead time etc.

· Any other ad-hoc duties as assigned

Your Success Factors

· Min. Diploma Holder in Precision/Manufacturing Engineering or similar field

· Able to read and interpret technical drawings

· Experience in Precision Engineering or related field advantageous

· Have experience in using ERP Systems advantageous

· Outgoing personality with strong interpersonal hunger for success and communication skills

· Initiative and results driven

· Entry level candidate are welcome

Job Description:

• Ability to design and create custom circuits and PCBs for products/projects by selecting suitable components (Interface with Sensors/Actuators/Relays etc.)

• Design the communications protocol between hardware and software modules.

• Knowledge/experience in PCB layout software (eg. KiCAD)

• Knowledge/experience in ESP32 microcontrollers (Platform IO/ C++)

• Knowledge/experience in Raspberry Pi, Linux, Node-Red, Docker

• Knowledge in communications protocols such as MQTT, Web Sockets, REST API

• Be a team player.

Responsibilities :

• Attending sites survey, precon survey, site inspection and handover
• Handling Contractor, assigning sites to subcons
• Draft technical proposal
• Liaise with other authorities such as HDB, LTA, Building Owner for Private sites
• Material & equipment acquisition, project coordination, progress monitoring, site technical support and as-built preparation and submission.
• Site handover with Client
• Coordinate with subcon and customer for site installation work.
• Follow up with contractors and update the status to client and Project Manager
• Attending site meeting and survey with Building Owner.

Requirements :

• Diploma / Bachelor’s Degree in Telecommunication or equivalent
• Preferred 2 years experience in telecommunication field
• Good communication skills, able to interact with people of all levels
• 5.5 days work week
• Woodland area

JOB DESCRIPTION

• Provide coordination, supervision, and leadership responsibilities for the repairs and maintenance of all Mechanical & Electrical equipment, engineering services, building installations, and facilities.
• Review the irregularity observed during the shift and discuss the corrective actions/preventive actions with the Chief Engineer.
• Conduct shift briefing on maintenance, control processes, and procedures stipulated in the Engineering Plan Manual.
• Review critical daily and weekly events of the Guestrooms and F&B Banquets to ensure that engineering support actions are taken or are being taken as planned.
• Inspect the works carried out by contractors and ensure that they work in accordance with the procedure stipulated in the service contract agreement.
• Conducting routine checking on all Mechanical & Electrical Services in accordance with the Engineering Maintenance Programmes.
• Monitor and ensure that all maintenance programmer activities are carried out as planned.
• Prepare the Engineering Checklists and work request forms for shift staff to conduct routine servicing & maintenance on all Mechanical & Electrical Services in accordance with the preventive maintenance plan.

JOB REQUIREMENTS

• ITE or NTC-2 with minimum 6 Year(s) of working experience.
• Diploma with 4 years of working experience.
• Sound knowledge in Building Services and Project management.

BENEFITS

• Company Transport / Uniform / Duty Meals / Medical & Dental Coverage provided
• Employee Discount Rate for F&B Dine-In and Hotel Room Stay Globally
• Learning & Development Opportunities and Staff Recognition Awards

COMPANY DESCRIPTION

We are one of the largest one-stop Underground Utilities Infrastructure companies based in Singapore. We provide Underground Utilities Infrastructure construction and maintenance, sewer pipeline rehabilitation, road and airfield construction and maintenance as well as asphalt pre-mix production and construction waste recycling.

RESPONSIBILITIES

• Developing in-depth understanding of project scope and particulars i.e. timeframes, financials, outcomes, plan and manage team goals, project schedules and new information.
• Communicate with clients to identify and define project requirements, scope and objectives, regularly schedule and attend meetings between stakeholders, clients, employees and the Project Manager.
• Getting necessary approval (NCE, LTA Approval, NPark and Special Approvals) for the site teams, and special approvals like GTP, MPA and LPB clearances and request for, TPOM Officers coordination for standing supervision.
• Maintain records and renew any expired approvals/permits that are required (C&G NCE, Telecom, GTP, LPB LOAs).SP Officers coordination regarding the following schedule of works (ROA Schedules, Reinstatement) for Distribution Projects.
• Coordinating with LTA and NPark officers regarding the ROA queries raised by authorities, and get approval on time.
• Providing support to project managers and operation team when requested.
• Participate in project design meetings and propose improvements if necessary, and sharing relevant documentation and reports with project teams.
• Communicate with clients to identify and define project requirements, scope and objectives.
• Plan and manage team goals, project schedules and new information.
• Adhere to budget by monitoring expenses and implementing cost-saving measures.
• Supervise current projects and coordinate all team members to keep workflow on track.
• Regularly schedule and attend meetings between stakeholders, clients, employees and the Project Manager.
• Direct project correspondences by preparing and reviewing project proposals, meeting minutes and emails.
• Providing support to project managers and operation team when requested.
• Being point of contact for various working groups.
• Manage project-related paperwork by ensuring all necessary materials are current, properly filed and stored.
• Perform other duties or tasks as assigned by immediate supervisor or HOD.

• Degree in Civil Engineering recognized by Singapore Professional Engineers Board (PEB)
• Minimum 3 year of experience in constructions or civil engineering
• Those with experience in underground utilities especially gas pipes will be advantageous
• Possess excellent interpersonal and communication skills
• Service-oriented client relationship and people
• Self-motivated and able to work independently
• Preferably possess a valid Class 3 license

Other Information

• 6 days work week
• Working location: Sungei Kadut (with company transportation provided at Woodlands and Kranji MRT Station)

Other Benefits

• Provided company lunch bus
• Medical Teleconsult
• Portable Medical Benefit Scheme (PMBS) - additional monthly contribution direct to Medisave account
• Medical benefits (applicable for dental and company provider health screening)

Why Join Us

• Opportunity to work in a dynamic and fast-paced environment
• Engage in diverse tasks that keep each day unique and interesting
• Be part of a team that values communication, efficiency, and security
• Supportive work culture with opportunities for growth and development

A technology is only as good as people's ability to use it. As a Senior Software Engineer at Padlet, you can own the full stack (hence the name) of taking our amazing technology at the back end, and making it usable on the front end.

As a Software Engineer at Padlet, you will work on both the frontend and backend components of our product.

ABOUT PADLET

We are building more beautiful and fun alternatives to traditional documents. They're less of a pain-in-the-ass to create, and a lot less waterboard-y to view. Think Microsoft Office, but not as soul crushing.

Over ten million people use Padlet, making it one of the largest sites in the world. The company is profitable and well-funded. Our office is on Boat Quay, overlooking the Singapore River which wends past our city's financial district. We've gotten this far with just twenty six people. Some special people work at this company.

TECH STACK

Rails, Node, VueJS, and code copy-pasted from Stack Overflow.

IT'S A GOOD TIME TO JOIN

Because we're small, there's a lot of energy. And because we have tremendous traction, your first commit touches millions. This combination is rare and quite satisfying.

1) The Design Engineer (DE) shall be an engineer in the civil/structural discipline with educational qualifications recognised by the Professional Engineers

Board of Singapore,

2) with at least five (5) years in the design of geotechnical works for deep excavation projects of a similar size and complexity.

3) Familiar with submission procedures to BCA, LTA and other agencies.

4) Capable of drafting or BIM modeling using Autocad or equivalent software

5) Capable of using Plaxis, Staadpro, MS Office Words, EXCEL and VBA.

6) Familiar with local codes and Eurocode.

7) Familiar with LTA Civil Design Criteria and Materials & Workmanshop Specifications.

8) 44 hours work week, including alternate Saturday.

9) Located in city central, near to Bugis MRT.

Job Responsibilities

• Report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals.
• Assist Project Manager in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.
• Prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.
• Manage day to day project activities including scheduling, coordinating and monitoring and reporting update of projects
• To supervise the execution of the works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract document
• To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist in verifying progress payments and claims from Contractors.
• Attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule
• Establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications.
• Be responsible for any other duties that may be assigned from time to time as your superior/management deem fit.
• Be the primary focal point between various parties

Qualifications & Experience

• Diploma or Bachelor’s Degree in Electrical Engineering/Electronics/Control Systems Engineering or related disciplines

Preferred Skills & Characteristics

• Self-starter and ability to self-manage strong interpersonal and leadership skills
• Demonstrated oral and written communication skills
• Must have high level of integrity, able to generate trust and build alliances with co-workers
• Able to communicate effectively & diversely for prompt resolution to site matters
• Able to work independently, take initiative and willing to work overtime/weekends (when needed)
• Ability to foresee and resolve issues before surfacing would be an added advantage
• Familiar with Job Safety Analysis, Work Method Statement and Permit to Work application requirements and procedures
• Ability to maintain good project documentation and is familiar with ISO documentation requirements
• Safety certifications such as Working at Height, Construction Safety Orientation Course etc. preferred
• Mandarin speaking preferred as will be liaising with overseas vendors
• Basic knowledge on Industrial Control Real Time Systems such as PLC/SCADA/IoT
• Basic programming skills in VB, C, C++, Java, C# etc is advantageous
• Additional skills in AutoCAD, Revit and Microsoft Office are advantageous

Position Overview: We are seeking a dedicated and detail-oriented Quality Engineer to join our team. The successful candidate will be responsible for ensuring the quality of low voltage switchboard panels to meet industry standards and client requirements. This role requires a strong understanding of electrical systems, testing procedures, and quality assurance.

Key Responsibilities:

• Conduct comprehensive testing of low voltage switchboard panels, including insulation resistance tests, contact resistance tests, high voltage tests and function tests.
• Perform inspections and audits of electromechanical assemblies to ensure compliance with applicable standards and specifications.
• Document test results and prepare detailed reports for internal and client review.
• Collaborate with design and manufacturing teams to identify and resolve any issues or discrepancies.
• Ensure all testing equipment is calibrated and maintained in good working condition.
• Participate in continuous improvement initiatives to enhance testing processes and procedures.
• Train production staff on quality control processes and provide guidance on quality-related matters.
• Stay updated with industry standards and advancements in testing methodologies.
• Ensure the quality of products meets the required standards and specifications.
• Support onsite testing, FAT, SAT and troubleshooting activities, if necessary.

Qualifications:

• Minimum Diploma in Electrical Engineering or a related field.
• Minimum of 2 years of experience in testing low voltage switchboard panels or similar electrical equipment.
• Strong knowledge of electrical testing procedures and standards (e.g., IEC 61439).
• Proficiency in using testing equipment and tools.
• Excellent analytical and problem-solving skills.
• Strong attention to detail and accuracy.
• Good communication and teamwork skills.
• Ability to work independently and manage multiple tasks effectively.

Preferred Qualifications:

Certification in electrical testing or quality control.

Employment Type: 6-12 months contract with the potential for permanent conversion

Job Responsibilities:

• Lead the setup and commissioning of test processes and machinery for new devices, ensuring equipment is fully operational and meets testing requirements.
• Optimize and maintain testing machines during the engineering phase to ensure efficient and accurate test execution.
• Analyze test results and perform post-build activities such as failure analysis and corrective actions (FACA) to address yield loss and improve processes.
• Collaborate with external vendors and internal teams to develop and deliver testing solutions for new optical modules during the engineering phase, particularly for small-scale production.
• Provide technical support in the development and refinement of test procedures, continuously improving testing methodologies and equipment.
• Ensure regular maintenance, calibration, and repair schedules are followed to maintain high performance and minimal downtime of test equipment.
• Generate clear and concise reports on test results, findings, and recommendations for process improvement.

Job Requirements:

• 3+ years of experience in a Test Engineer role or a similar position, with a focus on optical modules or related technologies.
• Bachelor’s or Master’s degree in Engineering, Physics, Materials Science, or a related field.
• Hands-on experience in functionality testing of optical devices, such as cameras, projectors, range finders, flashlights, and proximity sensors.
• Proven ability to operate, maintain, and troubleshoot test machines, with experience in tooling and configuring machines for new device testing.
• Familiarity with automated test equipment (ATE) and test software, including the ability to develop and refine testing processes.
• Proficiency in analyzing test data, conducting failure analysis, and applying corrective actions to improve yield and product quality.
• Strong understanding of statistical analysis tools and techniques for data interpretation.
• Knowledge of FMEA (Failure Modes and Effects Analysis) and root cause analysis methodologies.
• Excellent written and verbal communication skills, with the ability to work effectively with cross-functional teams.

- Requires a candidate that can perform a cross-platform experience in systems administration, including analyzing, designing, installing, maintaining, and repairing hardware, software, peripherals, and networks.

- Superior troubleshooting and technical support abilities with migrations, network connectivity, and security and database applications.

- Develop exceptional relationships with co-workers, management and end users.

- Requires onsite troubleshooting and management.

-Requires to perform labour work when necessary to ensure safety and efficacy of work rendered by peers.

- Committed to finding innovative solutions to a variety of IT problems, such as security, database management, software programming and technical troubleshooting.

- Knowledge in executing sales pitch and digital marketing experience will be advantageous.

- Driving licence of minimum class 3 will be advantageous.

- Shift working hours

- A minimum of Bachelor's Degree in IT/ Electrical Engineering/ Computer Engineering

- Other Engineering qualifications will be assessed before consideration

Job Responsibilities:

• Manage Workers and site progress.
• Prepare Waterproofing Safety Risk Assessment (RA), Method of Statement (MOS), and Safe Work Procedure (SWP).
• Draw waterproofing sub-drawing using AutoCAD and MicroStation software.
• Ensure that the waterproofing procedures comply with specifications, quality standards, and requirements.
• Liaise with Authorities and Main-contractors.
• Take site measurements and prepare monthly progress claims and monthly progress reports.
• Ensuring Supervisors & Foremen meet client & regulatory work requirements.
• Ensure that works are carried out according to specifications, drawings, and programmes without compromising on quality and safety.
• Maintain project schedule by monitoring project progress, coordinating activities, and resolving problems.
• Maintain safe & clean working environment by enforcing rules & regulations.
• Lead a team of supervisors to ensure full-time supervision of works on site.

Job Requirements:

• Bachelor's Degree in Civil Engineering or equivalent
• BCSS Certificate
• Proficient in AutoCAD and MicroStation
• Knowledge of Waterproofing works & Technical
• Knowledge of working at Height
• Minimum 1-year experience in waterproofing works
• Applicants with LTA project experience will be an added advantage
• Good oral and written communication skills

Key Responsibilities

Functional and Automation testing experience including tools such as Selenium, UFT, JIRA, Postman
• Degree in software engineering, computer engineering, electrical engineering or infocomm-related discipline
• Must have professional software quality testing experience with hands-on automation
• Strong understanding of testing techniques, risk analysis
• Strong understanding of test-driven development, continuous integration and continuous delivery
• Experience with automation scripting (i.e. Python and shell scripts)
• Experience with open-source automated testing frameworks (i.e. RobotFramework, Selenium Webdriver)
• Experience with open-source performance testing tools (i.e. JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)
• Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)
• Working experience in Agile environment will be an added advantage
• Excellent verbal communication and listening skills
• Proactive, self-driven and motivated

GitHub, Jenkins/ Ansible, Jfrog, Nexus, SonarQube and AWS Services
● Must have relevant DevOps experience
● Hands-on experience working on AWS
● Hands-on experience with containerization using Docker, and Kubernetes
● Good understanding of virtualization and networking concepts
● Hands-on experience with configuration management systems such as Terraform, Packer and Ansible
● Hands-on experience with production deployments such as Kubernetes and automating provisioning with IaC best practices.
Hands-on experience in linux server administration, and shell scripting with Bash, and good to have other scripting languages.
● Knowledge in system architecture is a plus
● Has knowledge with tools such as Prometheus, Thanos, Grafana, ELK
● Experience with highly scalable distributed systems
● Breadth of knowledge - OS, networking, distributed computing, cloud computing
● Manage the operations of cloud infrastructure and application services
● Strong technical aptitude including excellent troubleshooting and communications skills
● Good understanding and working knowledge of Agile projects such as SCRUM and KANBAN