Key Responsibilities:

• Responsible for MEP Design, taking off BOQ, sourcing the quotation and prepare quotation.
• Lead the development and submission of high-quality M&E tenders, ensuring compliance with all client requirements and deadlines.
• Attend site visit for tender briefing.
• Interpretation of tender specifications, client requirement, drawings and any other relevant documents; not limited to Project Presentation, Schedule of Rates, Technical Data, Risk Assessment, Bill of Quantity and documents needed for Tender Submissions.
• Understand how to do MEP design to comply with Singapore Standard.
• Liaise with suppliers and contractors to get proposals/quotations and carry out evaluation.
• Able to assist client for Value Engineering.
• Conversant with Singapore building codes and regulations.
• Demonstrate effective communication and consultative skills.
• Strong in communication skills and a team player.
• Provide guidance and support to project teams in the implementation of successful M&E practices.
• Ensure adherence to company policies and procedures throughout the tender process.

Job Requirements:

• Preferably hold a Diploma or Degree in Electrical Engineering
• At least 2 years of relevant working experience in Interior Fitting Out M&E Works
• Preferably have knowledge on how to prepare M&E technical design, technical write-up, prepare tender specifications and presentation slide for tender interviews
• MUST understand the process of tender preparation and submission
• MUST have experience in project costing and estimating
• MUST know BCA Green Mark Requirement
• Strong in Tender Presentation Skill
• Highly self-motivated, good working attitude with high level of professionalism & integrity
• Well-versed in MS offices tools i.e. Words, Excel and PowerPoint
• Strong understanding of M&E methodologies and best practices.
• Excellent written and verbal communication skills.
• Requires travelling to various worksites in Singapore
• Requires to perform night work/weekends when need arises.
• This position is only open to Singapore citizens and Permanent Residents.

Primary Purpose:

To implement process commissioning, warranty support and customer training and as well work closely with Customer Service Team and ensure that OIPT new installed tool can meet PA specifications well and be fully functional and available for customer use. Also, to involve regular extensive travel across Japan and Asia areas.

Key Responsibilities:

1. Process Commissioning: Follow SOP to implement process commissioning works and continuously improve SOP to shorten days to acceptance time.

2. Process Acceptance: Make a process summary report after process commissioning work is completed and assist to negotiation tool acceptance sign off.

3. Warranty Process Support and Training: Support warranty process issues troubleshooting to meet the requirements of Research/mass production customers and offer and promote process training to the customers.

4. Lateral Support: Assist to collect Research/mass production tools performance, e.g. MTBC/MWBC, uptime, thru-put, yield performance to support the tools sales and CIP upgrades.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

We are seeking an experienced IT Storage Engineer to join a dynamic team, responsible for post-sales support and solution design for enterprise IT products. The ideal candidate will have hands-on experience in IT solutions for storage systems, servers, and virtualization technologies, with the ability to collaborate effectively across local, regional, and HQ teams

Responsibilities

• Provide post-sales support for enterprise IT storage products, ensuring customer satisfaction and system optimization
• Collaborate with internal teams to deliver solutions and meet deliverables
• Design and provide low-level IT solutions tailored to meet the needs of local office, channel partners, and key account customers
• Develop Bill of Quantities (BOQ) and technical proposals, ensuring they meet customer requirements and high-quality standards
• Present technical solutions to customers professionally and conduct training sessions for local partners and customers
• Assist in the development of strategies for data protection, disaster recovery, and data migration within storage systems
• Continuously learn and adapt to new IT technologies and storage solutions

Requirements

• Bachelor’s Degree in Computer Science, Engineering, Telecommunications, or a related field
• Minimum of 2 years of experience in IT product design, delivery, and maintenance, especially in x86 servers, SAN/NAS storage, virtualization (VMware), and Windows/Linux/Unix operating systems
• Strong knowledge in x86 server architecture, SAN/NAS storage, data protection, disaster recovery, and data migration
• RedHat RHCE, HCIA/HCIP/HCIE, or other relevant IT certifications are an added advantage
• Experience in IT post-sales support for FSI (Financial Services Industry) or government sectors is preferred
• Familiarity with OpenStack, Oracle DB, and related technologies would be a plus

Interested candidates, who wish to apply for the advertised position, please click on "Apply Now". We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Job Scope:

• Create and analyze structural designs for buildings and infrastructure
• Oversee construction projects, ensuring timelines and budgets are met
• Conduct visits to assess compliance with design specifications
• Perform calculations for loads and stresses on structures
• Prepare design drawings, specifications, and reports
• Work with architects and engineers to integrate designs
• Ensure adherence to building codes and safety standards
• Address structural issues with innovative solutions
• Stay updated on materials and construction techniques
• Liaise with clients for project updates and requirements

Requirements:

• Minimum PhD or Master's degree in Civil and Structural Engineering (or equivalent)
• At least 2 years of relevant experience in Civil and Structural Engineering design
• Proficiency in steel 3D modeling, analysis, and design software (e.g., Rhino, Grasshopper)
• Proficiency in programming languages (C++, Python, Fortran)
• Ability to produce detailed layout drawings
• Experience in Tensile Membrane, ETFE Skylight, and Steelwork design is a plus

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• In-charge of submission and review of documentation

• To prepare cost estimation, budget & control & to check sub- contractor’s progress claim

• To plan manpower, tools and materials for the work

• Ensuring project meet deadlines

• Coordination of structural works during construction process

• Liaise with Clients, Consultants, main contractor, Subcontractors & authorities to ensure work progression is on schedule

• To assist Project Manager on coordination work, planning and monitoring site's workforce and multi-disciplinary works from inception to completion, inclusive of project documentation, plans and reports etc.

• To ensure the project team complies with safety regulation

· Reviewed shop drawings, submitted from sub-contractor and made submission to consultants

Overview of Role

A highly skilled and motivated Cloud DevOps Engineer, having a strong background in designing, building, and maintaining CI/CD pipelines, along with a deep understanding of automation solutions and best practices in cloud environments.

Responsibilities

• Design, build, and maintain CI/CD pipelines using various CI/CD platforms to streamline cloud deployments.
• Integrate automation solutions across applications to enhance operational efficiency.
• Ensure best practices and security are prioritized when developing CI/CD pipelines.
• Continuously improve operational workflows through task automation.
• Collaborate with subject matter experts to ensure automation solutions meet business requirements.
• Act as an innovative, hands-on DevOps engineer, focusing on both the technological and strategic aspects of the platform.

Requirements

• Proven experience with Kubernetes and containerization technologies.
• Experience working in multi-cloud environments, including AWS, Azure and GCP
• Hands-on experience with Infrastructure as Code (IaC) tools like Terraform and CloudFormation.
• Strong understanding about DevOps and DevSecOps terminology.
• Proficiency in automation tools such as Jenkins, GitLab Runner, AWS Lambda, AWS CodePipeline, and AWS CodeBuild.
• Management configuration tool like Ansible, Puppet.
• Familiarity with scripting languages such as Python, Bash, and PowerShell.
• Cloud certification (AWS, Azure or GCP) is highly desirable.
• Excellent communication and collaboration skills.

CCTV SYSTEM

• Involve in the project and maintenance services related with CCTV Systems, Access Control Systems, PA Systems, Alarm Systems and Server & Network Infrastructure and whenever required.
• Perform Installation, Implementation, Configuration and testing of system/storage equipment & setup.
• Troubleshoot Problem encountered on site.
• Develop implementation plan, migration plan, and acceptance test plan for the project.
• Work closely with Project/Maintenance Managers in Planning the implementation tasks.

ACCESS CONTROL SYSTEM

• Installation: Install and configure access control systems, including electronic locks, card readers, biometric scanners, and control panels.
• Maintenance: Perform routine inspections and preventive maintenance on access control systems to ensure optimal performance.
• Troubleshooting: Diagnose and resolve issues with access control hardware and software, including system malfunctions, wiring issues, and connectivity problems.
• Software Management: Install, update, and manage access control software, ensuring that all systems are up-to-date and compliant with security protocols.
• Customer Support: Provide technical support and training to clients on the operation and management of access control systems.

NETWORK

• Perform Installation and troubleshooting on network devices like Cisco, Aruba and Allied Telesis.
• Knowledge of Routers/Switches architecture and software upgrade procedure
• Support Network infrastructure Projects.
• Provide support to resolve network incidents and issues.
• CCNA/CCNP Certification

As a Service Engineer, you have to attend to equipment fault at customers’ premises. Liaise with the customer and sub-contractors regarding all aspect on the add-on project activities. Monitor the progress of the work done closely in order to ensure that the schedule and quality of work are met. Also to ensure that all materials and equipment are delivered on time as per schedule for site installation or rectification of fault. To carry out periodic maintenance for our customers.

You should possess a Diploma in Electronics and/or Electrical Engineering with 2-3 years’ hands-on experience in troubleshooting of card access systems, alarm systems, CCTV, etc. With good interpersonal communication skills and a valid Class 3 license. Stand-by duty is required.

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

• Analysis of project requirements and propose the solutions accordingly.

• Development of system technical specifications.

• Development of system architectures and integration with 3rd parties' systems.

• Technical interface with customers and other contractors.

• Realization of testing and commissioning works onsite.

• Network troubleshooting for wired and wireless systems both.

• Technical support to systems once into operation after commissioning.

• Onsite testing and commissioning.

Requirements:

•Tertiary qualification in Electrical and Electronics Engineering

•Minimum 6 years experience working on various communication systems technologies such as fibre-optic transmissions, digital trunked radio, public address and telephony, CCTV surveillance, access management and travel information systems.

•Experience in implementing railway-related projects.

Mon to Fri - 8am to 5.30pm

Responsibilities:

- Responsible for daily basis service work and handling new installation projects and testing commissions for air-cooled and water-cooled chiller.

- Routine servicing of Commercial Chillers (Air-cooled & Water-cooled chillers) onsite.

- Routine duties includes maintenance, troubleshooting and repair to commercial chillers, AHU, FCU, VRV CRAC, VRV Systems, including tear down and rebuild (overhauling).

- Able to read specifications and drawings by contractors.

- Inspecting and testing systems to verify system compliance with plans and specifications and to detect/locate malfunctions.

- Organise and keep up with records and report all faults, deficiencies and other unusual occurrences, as well as the time and materials expended on work orders.

- Responsible for adjusting system controls to settings recommended by manufacturer to balance systems handling for all types of refrigerant.

Requirements:

- Diploma/Degree in Mechanical Engineering

- Minimum 2 years of technical experience with knowledge in air-conditioning, Chiller, ACMV or HVAC systems

- Resourceful with good analytical and interpersonal skills

- Strong communication skills

- Good team player with ability to lead and multi-task

- Possess Class 3 driving license will be an added advantage

• Work with Project Manager to manage project related tasks to achieve the project objectives on time and within the cost target by strictly enforcing quality, safety, and customer satisfaction throughout the entire duration of the project.

• Ensure performance targets are achieved.

• Provide regular site progress update status to project manager.

• Ensure compliance to Organizational Norms, policies, procedures and requirements of the process and quality hold points defined in the work instructions of the Top Range Excellence / Fulfilment Plus process.

• Ensure product line-based installation checklists are progressively checked, signed and filed

• Conduct toolbox meeting minimum 2 times / month

• Monitor and review overall installation and T & C timeline and preparation of catch-up proposal, if applicable.

• Conduct weekly site progress meeting with subcontractors, monitor and supervise to ensure the subcontractors comply to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.

• Preparation of detailed program for the site team to follow accordingly & completed in time.

• Resolve drawing discrepancies & technical difficulties with Drawing team.

• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.

• Liaise with the Consultants on the submission related to structural works and Drawing Department.

• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.

• Adherence to safety practices in the workplace.

Requirements:

• Diploma / Degree in Engineering, Civil Engineering or Construction Management
• Experienced for more than three years in similar roles in building / civil projects or in the elevator and escalator industry.
• Experience in construction, installation, and site co-ordination management.

Angela Teh Ling Wei (CEI No.R1104464)

Contact Number:67860100

Email Address:[email protected]

Recruit Express Pte Ltd / EA Licence No: 99C4599

We regret only shortlisted candidates will be contacted

Degree or diploma in Civil Engineering or project management.

Please email your CV to: [email protected]

Our business:

Professional Engineer (PE Civil)

1. PE endorsement for any temp works

2. PE endorsement for wall hacking, submission to HDB/MCST;

3. Building structure crack/safety assessment

4. Scaffolding/shoring/formwork design

5. ECM design and submission to PUB / QECP inspection to site

6. A&A work design and submission to URA/BCA/HDB/LTA/JTC

7. SCDF submission for shop / factory partition works

8. LTA prompt submission for road opening;

9. PUB POWS submission

10. PUB Form B1 endorsement for sewer connection

11. SCDF FSC02 form endorsement.

12. HDB SED 054M form endorsement.

13. Project management

14. Design for Safety (DfSP) Services

15. Building structural inspection (PSI) to BCA requirements

16. Façade inspection to BCA requirements

17. Earth returning structure design and submission (ERSS)

M & E Work (PE Mechanical)

18. Design and PE endorsement to piping / ducting support

19. Design and PE endorsement to piping trenching excavation work

20. Endorsement to FSC02 form

21. Mechanical PE work

Geotechnical Consultancy

22. Deep Excavation

23. Slope Protection

24. Soil Improvement

25. Foundation Design

26. Soil Interpretation Report

Others

27. Land Survey

28. Pre-con survey

29. Technical clearance to Npark, PUB, LTA, JTC etc.

30. Traffic diversion design, LTA prompt submission

31. Design for Safety Professional (DfSP)

We are seeking a skilled Observability Principal Engineer with at least 2-3 years of experience in observability to join our dynamic team. In this role, you will be responsible for implementing, managing, and optimizing observability tools. You will work closely with cross-functional teams to ensure that our systems are monitored effectively, and issues are identified and resolved proactively.

Key Responsibilities:

• Design, implement, and maintain observability frameworks using tools such as Prometheus, Grafana, ELK Stack, tableau or similar.
• Design, implement, and maintain Monitoring tools such as BMC, CA, SolarWinds, SCOM, Dynatrace, Datadog or similar.
• Create and manage dashboards, visualizations, and reports to communicate system health and performance metrics.
• Collaborate with the sales team to understand client requirements and demonstrate how our observability solutions can address their specific needs.
• Prepare and deliver presentations, demos, and workshops to potential clients showcasing the capabilities and benefits of our observability tools.
• Troubleshoot and resolve tools-related issues in a timely manner.
• Assist in the training and mentoring of team members on observability and monitoring tools and practices.

Job Requirements:

• Bachelor’s degree in computer science, Engineering, or a related field.
• 2-3 years of experience in software development, Implementation, operations, or a related field with a focus on observability tools.
• Proficiency in implementing and managing observability tools.
• Solid understanding of cloud platforms (AWS, Azure, GCP) and containerization technologies (Docker, Kubernetes).
• Experience with scripting languages (Python, Bash, etc.) for automation tasks.
• Knowledge of best practices in monitoring, logging, and incident management.
• Strong analytical skills with the ability to diagnose issues and propose effective solutions.
• Excellent communication and collaboration skills, with a proactive approach to problem-solving.
• Technical experience in Enterprise Monitoring tools such as Dynatrace, Grafana, BMC,
• Knowledge of Automation tools, Cloud Technologies and DevOps Concepts, Open systems and Networking Technologies
• Good knowledge in various monitoring tools e.g. BMC, SolarWinds, CloudWatch and Azure.
• Experience with configuration management tools (Ansible, Terraform, etc.).
• Familiarity with APM (Application Performance Management) tools such as New Relic, Dynatrace, or similar.
• Understanding of network protocols and architectures.
• Experience with orchestration tools (e.g., BMC, Kubernetes, Apache Airflow, Jenkins) to create and manage automated workflows for deploying, monitoring, and scaling observability solutions.

Preferred Qualifications:

• Proficiency in observability tools (e.g., Grafana, ELK Stack, Datadog, Prometheus etc).
• Proficiency in ITOM tools (e.g., BMC, Dynatrace, CA, SCOM, IBM, SolarWinds etc).
• Strong understanding of monitoring and logging frameworks.
• Experience with distributed systems and microservices architecture
• Ability to write scripts for automation and data analysis.
• Experienced in cloud platforms (AWS, Azure, GCP) and their monitoring services.
• Experience with CI/CD pipelines and infrastructure as code (IaC) tools like Terraform or Ansible
• Relevant certifications in cloud computing, DevOps, or observability tools can be a plus.

Able to design the electrical system in the construction projects.

Must ensure compliance in the electrical systems.

Able to do coordinate installation.

Able to do maintenance and test activities.

Able to solve the issues in the electrical projects in the construction projects.

Able to lead the team of workers and site supervisors.

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in diffusion furnace equipment tools
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

(a) Responsibilities:

The candidate is responsible for the end-to-end testing activities of an integrated e-payment system. The primary responsibilities would include carrying out the activities in the testing lifecycle including the test

planning, and analyzing business and system requirements.

The candidate will also be responsible for:

• Preparing the test environment, designing, and developing the test cases.

• Preparing the test environment, and executing the test procedures.

• Automating the test solution based on the system design using scripting or programming languages as well as performance tuning.

• Create traceability to requirements, analyze gaps and address them.

• Logging and tracking defects to closure

• Conducting test reviews with internal and external stakeholders.

• Perform root cause analysis for production and user acceptance defects, and address test gaps to ensure test efficiency.

• Develop design documents and user manuals that would effectively describe and provide clear instructions on the test automation solution to the end users including testers and stakeholders.

(b) Qualifications & Requirements:

• Tertiary qualification in Information Technology or Engineering

• At least 3 years’ relevant experience in executing testing and

developing test automation solutions involving devices (UI-based

or embedded) and/or back-office systems with familiarity on the full

system development lifecycle from requirement, development, to

testing and deployment;

• Good written and verbal communication skills;

• Able to work well both independently as well as in a team;

• Certification in software testing preferred;

• Experience in micropayments Fare Collection systems using Smart Cards and in diverse test execution phases (System Integration Testing, User Acceptance Testing, Performance testing) would be an advantage;

Job Description

• Diagnose and resolve problems that occur in daily production lines/machines to minimise downtime and quality loss costs.
• Liaise with other departments to develop improvement plans to reduce quality loss costs and other cost savings activities.
• Develop process documentation and operating instructions for new/revised processes and/or products.
• Conduct the planned maintenance work for production machines & equipment to maintain optimum operating conditions.
• Manage Process Change control documents when implementing process and/or location changes on the assigned production process

Requirements

• Diploma or Degree in Mechanical / Mechatronic Engineering
• Min. 2 years experience in electronics connectors manufacturing environment
• Hands-on, enjoy solving problems
• A collaborative teammate
• A strong communicator and an active listener
• Strong analytical skill

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

Job Responsibilities:

• Plan, design, and oversee the constructionprojects.
• Review project specifications and designs to ensure they meet safety, structural, and aesthetic requirements.
• Manage project timelines and budgets, including procurement of materials and coordination with contractors.
• Implement and enforce safety procedures and regulations on construction sites.
• Review and approve construction plans, technical drawings, and engineering calculations.
• Provide technical guidance to construction crews and assist with resolving on-site issues.

Job Requirements:

• At least 5 years of working experience in construction / manufacturing industry
• At least Diploma & above in any discipline
• Possess Class 3 driving license with own transport

Job Description & Requirements

Job Description

• To assist in contract administration which include cash flow/ budgetary forecasts, cost estimates, cost data analysis, tender evaluation, processing of payments, claims, variation orders and preparation of reports and approval papers
• To ensure that contracts are administered in accordance with executed contract documents

Responsibilities:

• Coordinate with internal operation, M&E and Design team for interfacing works affecting architectural items
• Attending meeting with client, consultants or sub-con to discuss all architectural related issues.

Requirements:

· Have experience in engineering life cycle of Power Projects and have gone through all phases of project starting from FEED stage to conceptual and basic design to detailed engineering, procurement, tendering, construction to commissioning.

· Programing skills PLC, SCADA, AUTO CAD

· At least 6 years’ experience in local project

Your responsibilities include:

• Conceptualize M&E designs and execute the project with the detailed designs.
• Manage and engage client/consultant/ contractors and local authorities to drive project execution, submission to authorities and overall on-site construction supervision.

What you will need:

· A recognized university degree Mechanical or Electrical Engineering or Building Services.

· Minimum 2 years’ of relevant experience in design and implementation of building services.

· Strong team-working, communication and interpersonal skills. Able to build good working relationships with client and key stakeholders.

· Open to opportunities to be trained on a wide range of technical and management topics.

• Manage & attend to specific customers to achieve company sales budget
• Account management for assigned customers
• To support and meet the department objectives and business goals
• Attend to all customer enquiries
• Provide sales forecast to plant for raw materials and production capacity planning
• Work closely with oversea representative for new customers development activities
• Assist in implementing and execute plan in developing new customers
• Provide short- and long-term plan on market demand
• Survey and analyses market information for management

Requirements:

• Degree in any Engineering discipline with 2 years of experience in similar industry
• Outgoing personality and ability to work independently
• Good knowledge of general market information
• Good marketing strategy and analysis
• Strong negotiation, interpersonal and problem-solving skills
• No experience requires if able to meet the above requirement may apply

5 days work week

Electronics Manufacturing Co.

Loyang Area (Designated pick-up point)

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

Summary

This position is accountable for preparing the detailed Construction plans in accordance with the JGCAP’s company policies as the key person under the direction by JGCAP’s Site In-charge/ Project Manager and coordinating all construction activities on site among all JGCAP’s disciplines including subcontractors using his technical experiences and construction know-how and ensuring the completion of the work on schedule.

The detail plans as described above are as follows:

• Execution formation with the direction by JGCAP’s Site In-charge/ Project Manager.
• Outline of the Construction & sequence of work.
• Temporary facilities plan (If require) and subcontracting Plan.
• Manpower mobilization plan.
• Construction equipment mobilization plan.
• Work closely with the project scheduler on construction schedule and progress reporting.
• Constructability studies and plans, coordinate with Project Engineers and other related discipline as and when necessary.
• Scaffolding plan.
• Reflect the constructability plans in the inquiry for subcontracting.
• Preparation of documents such as specifications, procedures, manuals and etc.
• Erection plan of extra heavy equipment, inclusive of haulage plan.
• HSSE work control plan including rules and promotion plan together with JGCAP’s Site HSSE personnel.
• Coordinate with Project team of vendor specialists for work which need vendor specialist support.

Duties & Responsibilities:

• Initiate the subcontractors sourcing, inquiry package issuing, work scope clarification, sub-contractors evaluation & selection, cost negotiation and PO issuance.
• Work scope clarification & confirmation, BQ verification and construction direct & indirect cost estimation.
• Initiate Project’s Kick off meeting with the selected subcontractor and coordinating with selected subcontractors to ensure they are in line with company or project strategies and planning. Discussing and clarifying the detail of scope of work, execution plan, commercial issue and technical issue to minimize potential future conflict.
• Carry out constructability studies, construction activities planning and execution plan for the job.
• Coordinating with all engineering disciplines to ensure design, cost and client’s requirement can be achieved.
• Handling of issued drawings or field change sheet to ensure latest drawings to be applied.
• Work closely with the team member and subcontractor to prepare all the MSRA required for the project.
• Working closely with scheduler, subcontractors and clients to plan ahead and schedule critical work paths in order to avoid delays or obstructions on mechanical completion.
• Day to day management of the site, including supervising and monitoring the work progress, site labour force and any work of subcontractors.
• Overseeing quality control and health and safety matters on site.
• Maintain knowledge on all contract terms and legal requirements for project to avoid any delay in projects.
• Identify and resolve all technical issues in Construction process.
• Liaising with clients and company project team, including attending regular meeting and submitting reports to keep them informed of progress and construction issues.
• Liaising with any vendors, consultant, supervisors, subcontractors and the general workforce involved in the project.
• Assist the JGCAP’s Site In-charge/ Project Manager to monitor and manage the overall construction cost, including subcontractors’ progress billing, construction expenses and cost of variation order.
• Prepare and submit the weekly and monthly progress/construction reports to management.

Education Qualifications & Other Requirements:

• Degree in Mechanical engineering or equivalent.
• Over 3 years’ relevant experience in construction management field.
• Candidate with vast experience is also encouraged to apply.
• Experience in oil and gas or chemical projects.
• Knowledge in construction planning.
• Knowledge and experience in sub-contracting work.
• Proficient in MS Office, MS Powerpoint and schedule reporting.
• Clear awareness of construction management tools and method of execution.
• Familiar with Construction Practices.

Interested parties, please send in your detailed resume.

[Order Number: 671284-R]

Responsibilities

• Assist customer engineers in improving machine performance and processes.
• Develop and adjust process methods, equipment setups, and production techniques.
• Work with teams to troubleshoot issues, enhance processes, and implement automation solutions.

Requirements

No experience candidates are welcome to apply.

• Must be comfortable working in a cleanroom environment.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Tan Sin Rou
EA Personnel Registration Number: R22106434
EA License no.: 07C5771