This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

About the Role:

To maintain the service education system for trainers and distributors. This includes training on repair processes, installation, maintenance, and troubleshooting, as well as introducing new products by preparing training schedules and materials. The role also involves promptly tracking technical inquiries and providing remote support to other Business Centres and distributors, ensuring that all administrative documentation is accurate and complete to enhance efficiency and service quality. Additionally, it includes planning and reviewing the Quality Management System to improve repair quality in the repair centre.

Roles and responsibilities:

• ·Conduct in-service training on medical devices and related products for trainers in other Business Centres and distributors, including:

o Repair processes (assembly and disassembly)

o Installation and maintenance processes

o Troubleshooting

• Prepare service training and manage the introduction of new product repairs, including training materials and schedules.
• Establish a service education system for medical devices and related products for engineers in other Business Centres.
• Address technical inquiries and provide technical support (installation, maintenance, etc.) to Business Centres and distributors, both remotely and on-site (e.g., at hospitals).
• Ensure proper documentation, notification, tracking, and follow-up on all technical inquiries.
• Support Business Centres and distributors with all service and technical-related inquiries and activities.
• Escalate issues to higher-level support when necessary and act as a contact point between Business Centres and headquarters.
• Plan and review the Quality Management Systems of repair centers to secure and enhance repair quality.
• Perform any other tasks as assigned.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Diploma or Degree in any Electrical/Electronics/Mechanical Engineering Discipline
• At least 3 years of related experience in the medical device industry is highly preferred.
• Experience in technical support, including technical training.
• Experience with lean manufacturing and Six Sigma is preferred
• Strong hand-on skills and good eyesight.
• Willingness to travel to the Asia Pacific region if required.
• Proficient in the use of MS Office and its applications.
• Possess strong communication and troubleshooting skills.
• Able to work in a team environment and collaborate with staff across different age groups.
• A team player with enthusiasm for learning and the ability to work with minimal supervision.
• Strong troubleshooting and analytical skills.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

Job Scope

· Act as the primary point of contact for customers regarding shipment inquiries, order status, and

delivery timelines.

· Handle customer complaints and provide effective solutions in a professional and timely manner.

· Monitor and manage the end-to-end logistics process, including order entry, tracking, invoicing

and confirmation.

· Ensure that customer orders are processed accurately and within the expected timeline.

· Work closely with warehouse, transportation, and 3PL to ensure timely and efficient delivery of goods.

· Communicate with carriers and freight providers to resolve any issues related to shipments, such as delays

or damages.

· Prepare, verify, and maintain shipping documents, invoices, and customs clearance papers when required.

· Generate regular reports on delivery performance, customer feedback, and operations efficiency.

· Identify potential bottleneck in the supply chain and propose corrective actions.

· Escalate critical issues to appropriate departments or management when necessary.

· Gather feedback from customers to improve service quality and logistics processes.

· Stay updated on industry trends and best practices in logistics and customer service.

· Any other duties as assigned by the Reporting Officer

General information

As a Service Engineer, you will be responsible for executing Service work with low to medium complexity according to work instructions and in accordance with ABB standard processes, quality standards and safety guidelines.

Reporting to Service Manager, you will be delivering quality customer service to satisfy customers. In close co-operation with customer and other ABB teams, take actions to identify new Service business opportunities for ABB.

Health and Safety

• Apply safety rules and safe practices as well as environmental responsibilities
• Report unsafe practices and incidents

Service Delivery

• Execute after sales business activity preventive & condition based maintenance, trouble-shooting, repairs and commissioning.
• Actively coordinate with operation supervisors for optimal service potentials from regular customer interactions.
• Proactively involve in self learning and practical exposure for continuous competence and productivity improvement.
• Maintain high level of personal leadership on safety and quality on work performed as well as documentations.
• Reports early any technical/contract/quality/program/cost issues to management, along with recommendations for resolution.

Additional Requirement

• Understand customer needs & manage customer relationships
• Co-operate actively with other ABB units to achieve common targets
• Support sales team

Leadership

• Provide leadership and coordination for the service team
• Create and develop good team spirit

Continuous improvement

• Proactively identify area of improvement eg. Self-technical knowledge, job safety and etc
• Participate in discussion, meeting, training and e-learning

Your background

• Diploma, ITC or equivalent in Electrical/Electronics engineering with at least 3 years hands on repair and service experience on electrical equipment.
• Experience on LV & MV VFD will be an advantage
• Strong electrical or electronics engineering fundamental knowledge. Knowledge on theory, structure, application, testing methodology and component fault diagnosis/analysis will be added advantage.
• Strong self-discipline with initiative and learning spirit with positive attitude, team work and responsibility.

EMQ2 is seeking a highly qualified Service Delivery Lead to join our team and work on projects that impact the lives of many. Our products, including Enterprise Login, Payment Gateways, and Training and Learning Management Systems, are used by over 1,000,000 users. We're looking for passionate professionals to grow and learn with us. If youhave more experience, you may be considered for a senior role.

Job Overview

The Service Delivery Lead leads and supports programs and projects using different frameworks such as Agile, Hybrid, or Waterfall. They organize and facilitate meetings and events, gather business requirements from stakeholders, and prioritize change requests and bugs to optimize business value. They also remove any impediments for the project team, manage the risk plan and client expectations, and motivate the team to deliver the service according to schedule and quality.

The Service Delivery Lead is responsible for overseeing the entire service delivery life cycle from start to finish, including design, resource allocation, and software development. They also support the execution of test plans and bug fixes and work with different parties within the client organization to accelerate service delivery progress. They also key player in team development and responsible for holding teams accountable for their commitments and maintaining a good relationship with clients, users, and stakeholders. Additionally, they also work with the finance department on COC sign-off and payment milestones.

Good to have:

• Great organizational, planning, and problem-solving skills
• Great interpersonal skills, collaborating and team playing
• Excellent communication and presentation skills in English
• Excellent adapting way of working to environmental constraints
• Good analytical and listening skills
• Ability to translate business requirements into functional requirements
• Excellent understanding of how user centricity is incorporated into SDLC
• Excellent understanding of how product backlog, user stories, acceptance criteria and user flows fit within the development process
• Knowledge and use of Jira and Confluence
• PMI PMP or PRINCE2 certification preferred
• PMI Disciplined Agile / SCRUM certification is a plus

Should have:

• Experience delivering complex projects with multi-squad teams and timelines of up to 24 months.
• Experience working with Singapore Government agencies is preferred.
• Experience in bidding preparation and submission process.
• Experience orienting teams to deploying a service-oriented attitude in dispute situations.
• Experience in presenting to project sponsors and morale management of teams.
• Strong working knowledge of Jira, Confluence, and Microsoft Office tools,including Excel, PowerPoint, and Word.
• Experience in implementing project management tools, SmartSheet, Figma, and graph drawing is a plus; ability to maintain good documents and artifacts is crucial.

Personal traits:

• Resourceful, independent, and able to find creative solutions to problems even under pressure.
• Meticulous in approach, paying close attention to detail and ensuring high-quality work.
• Self-motivated, self-driven, and takes the initiative to take on new tasks and responsibilities.
• Empathetic towards others and able to communicate effectively to managestakeholders' expectations.
• Proven track record of being able to grow, learn, and take on more responsibilities over time.
• Bonus for being able to immerse in the company culture, understand the values and how things work, and adapt to thework environment.

Our Benefits:

• Competitive remuneration package
• Flexible work schedule and remote work options
• Career progression opportunities
• Medical Insurance Coverage
• Open & Transparent Culture with a flat hierarchy

How to Apply

Interested candidates, please send your resume to [email protected]

Our Recruitment Process

As a Service Delivery Lead, if you submit your resume, it will be personally reviewed. Qualified candidates will be invited for an interview with the hiring manager. The interview will be an opportunity for us to discuss your experience and expertise in the field and will last for 30 minutes.

Based on the outcome of the interview, the hiring manager will decide if you are a suitable fit for the position. If that is the case, the HR team will reach out to you with an offer and provide next steps.

Job Scope:

• Perform routine maintenance and troubleshooting of chiller systems to ensure optimal performance and efficiency.
• Provide exceptional customer service by addressing client inquiries and concerns regarding chiller operations and maintenance.
• Diagnose mechanical, electrical, and control system issues and implement effective solutions.
• Educate clients on proper operation and maintenance practices to extend the lifespan of their chiller systems.
• Prepare and submit detailed reports outlining service activities, findings, and recommendations for future improvements.
• Execute commissioning processes for new chiller installations, ensuring systems are installed correctly and functioning as designed.
• Other ad hoc duties assigned

Job Requirement:

• Min Diploma / Degree in Engineering
• Min 2 Years experience in chiller maintenance, commissioning, or related HVAC roles

All interested applicants, please send in your resume to: [email protected]

Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Job Description

• Industry/ Organization Type: Manufacturing – Air Compressor
• Position Title: Service Technician/ Field Service Engineer
• Working Location: Islandwide (Office at Tuas)
• Working Hours: 5.5 days (Mon – Fri: 9.00am – 6.00pm, Sat 9.00am – 1.00pm)
• Salary Package: Up to $4000 + OT + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Provide on-site support including the installation, start-up, testing, and commissioning of compressor and dryer units.
• Conduct troubleshooting, preventive maintenance, and repair of air compressors and refrigeration dryers, focusing on mechanical, electrical, and pneumatic systems.
• Respond to service calls and perform routine servicing at customer sites.
• Assist in overseeing the production process to ensure minimal breakdowns.
• Prepare and submit detailed repair and maintenance quotations for service and spare parts sales.
• Efficiently plan and coordinate individual service jobs on a weekly and daily basis.
• Conduct technical training to customers as necessary.
• Other ad-hoc duties which may be assigned.

APPLY NOW!!!

• Minimum NiTEC, Diploma or Bachelor’s Degree in Engineering (Mechanical) or Engineering (Mechatronics/Electromechanical).
• At least 2 years of relevant experience.
• Possess Class 3 driving license.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71131 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Assistant Service Engineer/ Service Engineer
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $3800 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair & maintenance of commercial cleaning equipment; e.g. road sweepers, ride-on auto-scrubbers etc.
• Must be able to perform troubleshooting on various electrical circuitry.
• Able to lead a team of technicians to provide excellent service support.
• All other assigned duties.

APPLY NOW!!!

• Minimum Diploma (Electrical Engineering) with expertise in AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Minimum 1 year of experience in customer support and in repairing heavy industrial equipment.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65054 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Highlights

• Friendly and positive working environment & work life balance
• Good Location Stations- CBD area and nearly MRT
• Genuine Career Growth & Competitive Medical Benefits
• Immediate Hiring and Full-time permanent job role
• NO OVERTIME AND NIGHT SHIFT

Job Description

Responsibilities

• Responsible for the aspects of the day-to-day operations of the e-commerce platform including but not limited to user experience, order fulfillment, customer service.
• Listening to clients’ concerns and handling complaints and returns
• Consolidate clients' feedback such as technical issues or any other requests then report to the relevant department accordingly.
• Keep track of clients’ membership status, order status and prepare agreements/ contracts.
• Manage and consolidate clients’ profiles, reports, orders and other required information.
• Provide professional service and advice to achieve customer satisfaction throughout the whole transaction.
• Notify clients of any change of policy.
• Keep clients updated on the latest promotion, latest services, latest features, etc.
• Explore and experiment with new digital features of the company’s new E-commerce platform.

Requirements:

• Ability to speak Mandarin to handle our Chinese-speaking customers
• Analytical, data-driven person with strong problem-solving skills.
• Have prior experience running online marketplaces
• Ability to work in a team setting
• Proactive and able to learn new knowledge.
• GCE A level or above with 1 years of experience in customer service
• fresh grade also welcome and

Additional Information:

Working hour: Mon-Fri (9 am-6 pm / office)

Every alternative Saturday 09:00-13:00( WFH) , Only require you to be at work on Saturdays if necessary.

Working Location:

• Orchard MRT

Salary Range:

Negotiable based on candidates' actual working experience.

Kindly indicate your availability for work commencement, the reason for leaving, expected salary, Birthday etc.

We regret that only shortlisted applicants will be notified.

Position Overview:

We are seeking a dynamic and customer-focused individual to join our team as a Customer Service Executive specializing in Order Management. The successful candidate will play a pivotal role in ensuring a seamless order processing experience for our customers. The primary responsibility will be to manage and oversee the end-to-end order fulfilment process, ensuring accuracy, efficiency, and exceptional customer satisfaction.

Key Responsibilities:

1. Order Processing:

• Receive and review customer orders, ensuring accuracy and completeness.
• Input orders into the system accurately and in a timely manner.
• Coordinate with various departments to ensure order fulfilment within specified timelines.
• Lead and see-through end-to-end delivery process of orders (from arrangement of deliveries to delivery date)
• Handle returns enquiries and provide clear guidance to customers on return process.
• Handle all claim matters on defects and wrong pricings, etc.

2. Customer Communication:

• Communicate with customers regarding order status, delivery timelines, and any relevant updates.
• Handle customer inquiries and concerns professionally and efficiently.
• Provide proactive communication to customers regarding any potential delays or issues.
• Follow up to resolve any issues that arises.

3. Issue Resolution:

• Investigate and resolve order-related issues promptly and effectively.
• Collaborate with cross-functional teams to address any challenges in the order fulfilment process,
• To resolve feedback and address operation challenges.
• Proactively identify opportunities for process improvement to enhance overall customer satisfaction.

4. Documentation and Record Keeping:

• Maintain accurate and up-to-date records of customer orders, interactions, and resolutions.
• Prepare and maintain reports related to order processing metrics.

5. Collaboration:

• Work closely with the Sales, Warehouse, and Logistics teams to optimize order fulfilment processes.
• Collaborate with internal stakeholders to ensure alignment on customer expectations and delivery commitments.
• Foster a positive work environment.

Qualifications:

• Possess a Degree (Fresh graduate), Diploma or equivalent
• 5 years of proven experience in customer service, order management, or a related role.
• Excellent communication and interpersonal skills. Strong proficiency in written and spoken English.
• Strong organizational and multitasking abilities.
• Attention to detail and a commitment to accuracy.
• Problem-solving skills with a proactive and customer-centric approach.
• Proficiency in using order management systems and related software.

Preferred Skills:

• Familiarity with order processing systems.
• Prior experience in a fast-paced customer service environment.
• Knowledge of supply chain and logistics processes.
• Ability to adapt to changing priorities and thrive in a dynamic work environment.

Responsibilities:

• Service existing accounts, obtain orders, and establish new accounts by planning and organizing daily work schedule to call on existing or potential sales outlets and other trade factors.
• Development and performance of all sales activities in the assigned territory (i.e. lead generation, cold calling, and appointment setting).
• Provide technical support such as troubleshooting, performance improvement and other request to customers.
• Engage in continual improvement, productivity and efficiency with customer by performing data and performance analysis, reporting and following up actions
• “Hands-on” servicing of accounts which includes but is not limited to; chemical testing, calibration and repair of chemical feed related equipment, and visual inspections of systems when necessary.
• Schedule service and sales calls – includes daily, weekly and monthly reporting
• Identify new business needs and opportunities, and develop and implement customized solutions for our customers

Requirements:

• Diploma Degree, or above. Preferred degree in engineering (chemical, environmental, biological, etc.) and sciences (biology, chemistry, etc.)
• Minimum of 3-5 years technical sales or field sales support work with a proven successful track record.
• Those with experience in water treatment, water hygiene, environmental health and safety, and/or secondary disinfection will be an added advantage.
• Possess great team work and demonstrated leadership, organizational, and management skill.
• Strong communication skills (both written and verbal) with experience working on teams from multiple locations.
• Knowledgeable in MS Office applications (Word, Excel and Outlook).
• MUST be Highly Motivated and a Self-Starter.
• Must be willing to work in chemical, noise and hot & cold environment.
• MUST be in good physical ability – the job requires frequent walking to and from worksite.
• Ability to work flexible schedule, some weekends required depending on the servicing of accounts

Stork Gears & Services Asia Pte Ltd are an ISP for Rotating equipment from Europe which focuses mainly on Inspections, Repairs, Modifications and Overhaul of Gearboxes for both the Marine and Land based Applications. We have an OEM background, Rademakers, Conrad, Brevo, Kuypers, Jahnel Kesterman, but with an Independent service provider mind-set.

Stork is known for:

• Highly qualified and experienced engineers
• Highly Price competitive vs OEM
• In-house manufacturing critical parts
• On-site reverse engineering

Our service portfolio consists of:

• Diagnostics services
• Onsite services 24/7
• In-house engineering: design of gearboxes,
• Parts manufacturing (Impellors, shafts, gears)
• Custom built
• Workshop repair

Job description: (Field) Service Engineer

Purpose of the job

Responsible for the technical realization of projects, during the disassembly, assembly, inspection and repair, installation and commissioning of equipment, installations and related components.

Characterization

• Performs assignments/projects on the basis of requests from the project manager and project planning.
• Technical lead of the project team consisting of mechanics, (field) service engineers and subcontracted staff.
• Is responsible for maintaining the overview and ensures that the project is executed safely, in a structured manner, with a high quality standard and within planning and budget.
• Projects are performed at client sites (worldwide) or in the workshop. Often under time pressure and in unexpected or hectic circumstances.
• Flexibility: reachable and deployable, also on irregular hours.
• Realizes the most optimal technical solution and report on progress and the (technical) end result to the customer.
• Fulfills a leading role in respect of compliance with safety and environmental instructions, guidelines and policies of Stork and the client.
• Is highly specialized in installation & equipment technology and product knowledge.
• Service—oriented professional.

Tasks/Responsibilities

1. Authorizations

• Independently performing inspections, measurements, repairs, disassembly and assembly of installations, equipment and related components.
• Authorized to operate specialist machines and tools.
• Competent to specialist work based on required training.

2. Execution

• (dis)Assembly, inspection and repair of installations, equipment, related components and connected installations onsite, according to work instructions. Sets priorities on location and specific approach to the work; on site troubleshooting.
• Searches for the technical optimal solution with regard to costs and downtime.
• Responsible for the overview of the progress of the project on-site, ensuring that the project is carried out safely, in a structured manner, with a high quality standard and within planning and budget.
• Communicating the status and progress of the project to the project manager, adequately reporting possible scope changes.
• Self-starting and able to fully prepare, execute and complete the work independently both technically and administratively.
• Can deal very well with tight deadlines and can very well structure work in hectic and/or unexpected circumstances.
• Makes adequate protocols (if necessary) and technical reports.
• Works closely with other relevant departments so that the project can be delivered to the customer in accordance with the scope.
• Monitor and manage technical intellectual property if appropriate.
• Technical assistance and advice to internal and external stakeholders on use, maintenance, repairs, risks and possibly renewal of the installation.

3. Leading the team

• Managing the project team (on-site), ensuring that the project is carried out safely, in the agreed manner, with high quality and within the agreed timeframe.
• Detection of deviations, intervening if a deviation is detected.
• Coaching, supporting and guiding the project team on-site.
• Responsible for timely and adequate internal and external reporting and administration.
• Making and/or supervising correct use of: tools, machines, measuring instruments and other means of production.
• Maintaining equipment in good condition under applicable norms and regulations, timely reporting and/or solving in case of imperfections and malfunctions.
• Proactive in personal development and knowledge sharing within the team and organization.

4. Safety, quality and environment

• Is accountable for safety and quality aspects within the project.
• Meeting and monitoring the correct safety measures for a safe working environment.
• Report safety incidents and / or near misses in accordance with applicable procedure.

5. Others

• Responsible for maintaining contact with the client at an operational level.
• Actively participate in realization of additional work during development and execution of projects, technically assisting the sales department.
• Proactive relationship management; as ambassador encourage clients to purchase more services and / or products.
• Keeps knowledge up to date within his area of expertise (i.e. through keeping track of technological developments and/or professional literature).
• Assists in development of and test new methods, techniques and new services.

Knowledge and Skills

• Relevant technical education, i.e. mechanical engineering
• Relevant technical education; mechanical engineering or related
• Preferably services background
• Possesses required certifications
• Able to read schedules and mechanical engineering drawings
• Use and application of auxiliary tools and measuring instruments
• Fluent in English

ROLES & RESPONSIBILITIES: -

Perform monitoring activities using tools provided as well as reviews of transactions flagged out

Ensure that all tasks are completed/submitted in accordance to Standard Operating Procedures within the agreed timelines/SLA. -

Ensure proper documentation, notification, escalation, tracking and follow up of all interactions with client

Handle ad hoc duties as required

REQUIREMENTS:

- Minimum 1 year of experience working in an administrative role

- Fast learner and good team player

- Demonstrates good communication skills and comfortable to work in a fast-paced environment

- Working/shift hours are 10am-10pm, 4 days a week

- Able to work rotating shift hours including weekends and public holidays

- Basic F&B operations.

- Assist to set and clear tables.

- Assist to serve customers.

- Able to commit at least 2 shifts a week

Job Description

Handle customer appointments booking, incoming call & register customers

Handle check out transactions on the computer system

Provide excellent customer service and treatment recommendation to customers

Relationship building with existing and new customers to maximize sale opportunities

Handle customer problem and feedback

Deliver professional consultation and evaluation of customers’ needs

Follow up consultation with customers with regards to their treatments and products purchased

Job Requirement

Pleasant personality and have great patience

Able to handle counter system

Good in communication

Relevant work experience preferred

Must be able to work on weekends and public holidays

Job Description & Requirements

Key Accountabilities

• handle enquiries via phone, email and social media platform
• prepare sales proposals for existing and new customers
• execute order processing and order fulfilment tasks
• collate monthly sales report
• prepare invoices and work with Accounts Department to ensure prompy payments
• schedule work for technical teams to meet customers timelines
• liaise with external vendors : suppliers, contractors and business partners
• other adhoc duties assigned by Management

Requirements

• minimum 2 years of working experience in the Sales/Customer Service field
• minimum OA level or equivalent
• excellent spoken and written English skills
• proficient in MS Excel, Words & powerpoint

Job Description:

We are looking for a passionate and customer-oriented Junior Customer Service Officer to join our dynamic team. In this role, you will be responsible for providing exceptional customer service to our clients, ensuring their inquiries are addressed and their issues are resolved in a timely and professional manner.

Key Responsibilities:

• Respond to customer inquiries via phone, email, and chat.
• Provide accurate information about shipment status.
• Maintain a positive and professional attitude in all interactions with customers.
• Collaborate with other team members to improve customer service processes.
• Perform any other duties as assigned by the Supervisor or Manager.

Requirements:

• Fresh graduates or candidates with no experience are welcome.
• Excellent communication skills (both written and verbal).
• Strong problem-solving abilities and attention to detail.
• Ability to work in a fast-paced and dynamic environment.
• Positive attitude, adaptable, and willing to learn.

As a Service Engineer, you have to attend to equipment fault at customers’ premises. Liaise with the customer and sub-contractors regarding all aspect on the add-on project activities. Monitor the progress of the work done closely in order to ensure that the schedule and quality of work are met. Also to ensure that all materials and equipment are delivered on time as per schedule for site installation or rectification of fault. To carry out periodic maintenance for our customers.

You should possess a Diploma in Electronics and/or Electrical Engineering with 2-3 years’ hands-on experience in troubleshooting of card access systems, alarm systems, CCTV, etc. With good interpersonal communication skills and a valid Class 3 license. Stand-by duty is required.

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

After Sales Service Engineer (Perm)

Experience: 3-5 years in HVAC or chiller

Salary Budget: $3500 to $4500 (Basic)

Work location: Gateway West, Site, can WFH on certain days too, depending on work schedule.

Perform routine maintenance and troubleshooting of chiller systems to ensure optimal performance and efficiency.

Provide exceptional customer service by addressing client inquiries and concerns regarding chiller operations and maintenance.

Diagnose mechanical, electrical, and control system issues and implement effective solutions.

Educate clients on proper operation and maintenance practices to extend the lifespan of their chiller systems.

Prepare and submit detailed reports outlining service activities, findings, and recommendations for future improvements.

Execute commissioning processes for new chiller installations, ensuring systems are installed correctly and functioning as designed.

Collaborate with agent, customer and contractors to verify system performance and compliance with specifications.

Foster a collaborative working relationship with contractors, encouraging teamwork and shared problem-solving.

Work closely with the contractor to share knowledge, improve processes, and enhance overall service delivery.

Adhere to safety protocols and regulations while performing service tasks to ensure a safe working environment.

Conduct safety briefings and ensure all parties understand their responsibilities regarding safety.

May involve working in various environmental conditions, including outdoor settings.

Field-based role with travel to client sites.

Available to respond to chiller breakdown calls during assigned standby shifts.

How to Apply:
Send your resume to Jocelyn Chan at [email protected] or contact via Telegram @jocelynchan.

Jocelyn Chan | Consultant | Recruit Express Pte Ltd (Healthcare & Lifescience)
Company EA Licence Number: 99C4599
Personnel EA License: R1331820

The title holder will lead a team at a worksite to maintain the ACMV equipment and system at the design efficiency and functionality. He/She will ensure that the team conducts themselves with professionalism and provide a high-level of quality service to our customers. He/she will be responsible for the following:

Daily Operations

• To execute the maintenance regime for site equipment to keep the equipment functioning at the required plant and airside efficiency
• Troubleshoot technical issues and thereafter organise and carry out the necessary rectification works
• Schedule, plan and assign the monthly duties of the team
• Conduct skills training to new team members
• Maintain a high degree of safety standards and create a safety concious workplace
• Conduct daily toolbox meetings

Customer Service and Management

• Attend discussions and meetings with building management and tenants
• Prepare proposals/quotations and routine service reports
• Co-ordinate the resolution of technical faults within the committed timeline
• Audit and maintain high consistency of work methods and work quality delivered by the team

The Ideal candidate is a self-driven leader who has good technical knowledge and the determination and energy to drive himself and his team to deliver excellent service to customers. To excel, he should have the following attributes:

• Diploma in a relevant Engineering/Sustainability field
• Interest in energy efficiency and optimisation
• Related work experience will be an advantage
• Good written and spoken English
• Excellent planning and organizing skills
• Flexible, analytical, and efficient in problem solving
• Able to perform shift work

Summary of Responsibilities

• Conduct outlet briefings
• Ensure that outlet logbooks are up to date
• Ensure colleagues' grooming standard are being met and maintained to demonstrate a professional image for our guests
• Establish and maintain a monthly training plan according to the standards required
• Respond proactively to guest queries and to ensure appropriate action is taken in the absence of the manager
• Guide the operations to ensure that guest satisfaction is monitored and where appropriate, rectified
• Ensure that the restaurant is staffed according to operational needs at all times
• Assist the manager in liaising with other departments to ensure that outlet features are in good and clean condition
• Ensure that the place of work and surrounding area is kept clean and organized at all times
• Handle all guests’ requests and complaints politely, promptly and professionally

Job Requirements

• Minimum three (3) years of F&B experience in a same capacity in international luxury hotel groups
• Able to do shifts and work on weekends, 5 day work week
• Service-oriented team player with excellent interpersonal and communication skills
• Able to multi-task and work under pressure in a fast pace environment

About the Company

Founded in 2016, Car Choice Group is one of the largest pre-owned automotive dealerships in Singapore with over 6 showrooms islandwide. Our diversified entities include Bike Choice Singapore, SK Magic (Singapore), GEM Credit, and Auto Infinite.

Mission & Vision: Driving Progress

• Mission: Redefine car buying, nurturing long-term relationships, and ownership.
• Vision: Be the preferred destination for car buying in Singapore while upholding our commitment to sustainability and social responsibility.

Core Values: Our Pillars

• People-Centric: Elevating customer experiences, empowering staff.
• Transparent & Genuine: Delivering clear, systemic information.
• Ethical Excellence: Upholding the highest ethical standards.

Responsibilities

• Serve as main liaison between customers and service team.
• Manage queue system, greeting customers professionally and ensuring a seamless service experience.
• Complete and maintain accurate records via job sheets.

Skills Required

• Minimum 1 year of working experience in customer service or related fields.
• Prior working experience in the automotive experience would be advantageous.

Other Requirements

• Possess strong interpersonal and communication skills.
• Service oriented with a passion for customer service.
• Patient and empathic.

About the company

Founded in 2016, Car Choice Group is one of the largest pre-owned automotive dealerships in Singapore with over 6 showrooms islandwide. Our diversified entities include Bike Choice Singapore, SK Magic (Singapore), GEM Credit, and Auto Infinite.

Mission & Vision: Driving Progress

• Mission: Redefine car buying, nurturing long-term relationships, and ownership.
• Vision: Be the preferred destination for car buying in Singapore while upholding our commitment to sustainability and social responsibility.

Core Values: Our Pillars

• People-Centric: Elevating customer experiences, empowering staff.
• Transparent & Genuine: Delivering clear, systemic information.
• Ethical Excellence: Upholding the highest ethical standards.

Responsibilities

• Serve as main liaison between customers and service team.
• Manage queue system, greeting customers professionally and ensuring a seamless service experience.
• Complete and maintain accurate records via job sheets.

Skills Required

• Minimum 1 year of working experience in customer service or related fields.
• Prior working experience in the automotive experience would be advantageous.

Other Requirements

• Possess strong interpersonal and communication skills.
• Service oriented with a passion for customer service.
• Patient and empathic.

Responsibilities:

• Communicate with customers, understand their needs and attend to their queries
• Handle and resolve customers’ feedbacks and concerns
• Ensure a wonderful salon experience for our customers to increase customer retention
• Handling phone enquiries with etiquette
• Serving light refreshments to customers and attending to their needs
• Schedule customers’ appointments and other ad-hoc duties as assigned
• Gather customer satisfaction levels and feedback on customer services for continuous improvement
• Provide feedback and ideas to improve operations and enhance customer experience
• Comply with data protection regulation and organizational security procedures for customer registration and credit and cash transactions

Qualifications & Requirements:

• Well-groomed and maintain a professional self that suits our salon image
• Good and precise communication skills
• Service oriented and passionate about serving customers
• Prior experience in the beauty line would be advantageous