Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 24 months
• Start from: End January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 4 years of relevant experience in supervision of factory OR commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Job Summary:

The HPC Storage Engineer will be responsible for managing the storage infrastructure within HPC environments. This role involves monitoring storage performance and optimizing through tuning and troubleshooting. Successful candidate with demonstrated experience in the HPC storage field may be considered for a Senior position.

Responsibilities:

Storage administration and optimization

• Work with Managed Services teams in managing and administering the storage infrastructure.
• Ensure storage reliability and availability within HPC system.
• Provide support on technical queries and troubleshooting storage-related issues.
• Implement best practices for storage monitoring and reporting.
• Monitor utilization rate, allocation and analyse the report for capacity planning.
• Conduct storage performance test and analysis.
• Collaborate with other teams for enhancement of storage performance and scalability.
• Develop and maintain comprehensive documentation for HPC storage infrastructure and processes.

Data management

• Create and execute a data placement strategy to optimize storage performance.
• Maintain data protection and disaster recovery strategies.
• Implement and maintain security measures to protect data integrity and prevent unauthorized access.

Designing and planning

• Assess future requirements and plan for storage expansion.
• Assist in the designing of future HPC system acquisition.
• Explore and evaluate emerging solutions in HPC storage technology.

Qualifications:

• Degree in a Computer Science, Engineering, IT or other relevant areas.
• At least 3 years of experience in managing storage infrastructure.
• Proficient in UNIX/Linux environments and command line interface (CLI).
• Good knowledge of HPC storage principles.
• Experience in managing parallel file system (Lustre, GPFS, BeeGFS).
• Good knowledge of RDMA-based interconnect (InfiniBand, RoCE).
• Demonstrate ability to analyse complex issues and develop effective solutions.
• To be considered for Senior position, candidates should have at least 5 years of experience in roles that involve the deployment of HPC storage infrastructure, covering key areas such as designing, installing, configuring, documentation and providing admin/user training.

Job scope

As a Senior RF application engineer, you will be responsible for developing/testing the evaluation board and product board for RF SoC targeting at UWB and BLE applications. Your responsibilities will include collaborating closely with chip designers to understand the chip function and testing requirement, and optimize the performance of the solution at a system level. Additionally, you will provide direct support to end customers in integrating the chip into their products.

Key responsibilities:

1. Develop and test EVBs for RF SoC targeting at UWB and BLE application

2. Develop and test product board including RF SoC, flash, power supply, filter, antenna, etc.

3. Conduct test and work with certification bodies for FCC, CE, CCC certification

4. Provide support to end customer for chip integration

Key Knowledge Requirements:

1. Familiar with typical power supply circuit e.g. DCDC, LDO, and the design principles of power integrity and isolation

2. Understanding of signal integrity for high-speed digital signals

3. Knowledge of transmission line impedance, matching, filter, EMC/EMI, antenna

4. Familiar with the requirement and testing of FCC, CE, CCC certification

5. Proficiency in PCB design software PADS/Altium Designer/Allegro for schematic design, PCB design, BOM generation

6. Experience with RF testing equipment including spectrum analyser, signal generator, oscilloscope, network analyser

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.

We are looking for people who

• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

Job Description

About the role

Works closely with and have impact on: Manufacturing Engineering, Supplier Quality

Reports to: Senior Molding Engineering Manager

Function: Global Research & Development

Work Location/Site: Singapore / Global Headquarters

Role Overview

This position is responsible for the plastic injection tooling and molding project management of new product developments, transferred projects, capacity expansion, as well as continuous improvement for production tooling.

Duties and Responsibilities

> Plan and manage molding engineering budget

> Support all molding engineering related projects

> Lead projects related to quality, yield, process efficiency, and capacity improvement

> Lead end-of-life issues pertaining to product materials and components

> Lead qualifications of 2nd source of materials or equipment for business continuity

In New Product Development Support,

> To be accountable as project leader for tooling development from prototype until mass production stage. Tasks are included but not limited to below aspects:

• Manage the tooling project to ensure project timeline, capital investment and tooling performance target are consistently met
• Review and provide valuable input to Design For Manufacturing (DFM) documents from mold maker, and to assist R&D product designers to optimize product design from tooling scalability and best molding production cost perspective
• Analyze and understand product design, generate mold specification and acceptance criteria, conduct mold design review
• Oversee mold, equipment, process testing and debugging, conduct testing result review and drive mold performance improvement
• Document and transfer tooling knowledge from 1 cav prototype to multi cav mass production tooling
• Molding supplier factory molding validation IQ/OQ/PQ review

> Collaborate with in-house manufacturing and quality team to qualify new tooling. The tooling are for injector parts, IOL optical PP mold, and process aids for material production

> Compile tooling and molding related documentation in accordance to the regulatory requirements, and maintain the quality of molded components

> Initiate the Change Control submission and review, conduct Risk Assessment, draft and get Validation Plan, Validation Protocol/Report reviewed and approved based on the project master plan

In Sustaining Engineering

• Monitor and evaluate production tooling performance at vendor sites and lead the project to develop new tooling for capacity expansion and replacement/renewal
• Trouble shoot IOL and injector defects potentially related with injection molding production which occurs in the vendor’s manufacturing site (Japan, Singapore, Malaysia, etc.), drive solutions with data analysis and fact-based approach
• Be involved in sourcing of alternative vendor of plastic tooling and molding production for long term business sustainability

Requirements

Experience

• At least 3 years of technical experience in medical device/pharmaceutical industry
• Understand IQ/OQ/PQ validation requirement in accordance with IS013485 standard
• Able to write, review and coach validation protocol and report
• Track record of successful tooling and molding project management, tool makers and molding suppliers handling experience in the region
• At least 3 years of hands on experience in tooling design and Design For Manufacturing (DFM) for product and tooling design
• Solid molding process knowledge is required, and with at least 3 years of Scientific Molding practitioner

Skills/Accreditations

• Preferably Lean 6 sigma green belt trained, understand DMAIC approach, Failure Mode Effect Analysis (FMEA), Gauge R&R and Design of Experiment for trouble shooting and process improvement
• Strong technical writing skills
• Quick learner with logical thinking, good communication skills in English, customer focused, ability to drive results
• Able to read and speak Japanese is a plus

Academic Qualifications

• Bachelor‘s degree in mechanical or chemical engineering field related to plastic injection molding, or diploma in Engineering with more than 3 years experience in project management of customized mold design

Travel requirements

• 10 – 25%

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

Job Description:

• Administer project planning and project execution;
• Ensure all project activities are peformed productively and are in accordance to specification and schedule, in the most efficient and cost effective manner;
• Coordinate the mobilisation/demobilisation of construction equipment to suit construction schedules;
• Assist with cost control and estimating activities;
• Check and verify subcontractor claims and variations;
• Maintain close liaison and communication with field operations team;
• Ensure all company reports and documentation are completed accurately and on time;
• Perform any other related duties as and when assigned by Manager.

Job Requirements:

• Diploma/Degree in Mechanical Engineer or related Engineering field;
• Min. 3 years of related field experience;
• Knowledge of Autocard will be advantageous;
• Dynamic and good team player;
• Able to travel overseas as and when required.

Locations:

1. Tekong Camp (1 position)
2. SAFTI Camp (West) (1 position)

Salary:

• Tekong Camp: Basic: Up to S$2400
  Allowance: S$100
  Mobile: S$20
  
• SAFTI Camp (West): Basic: Up to S$2600
  

Contract: 2 years (Renewable) - No Bond
Eligibility: Locals only
Security Clearance: G50 clearance (approximately 6 months process)

Scope of Services:

• Perform asset management for infrastructure and computing devices.
• Provide computer support services, including troubleshooting, patching, configuration, testing, and maintenance for supported software and hardware.
• Collaborate with third-party vendors.
• Conduct training, coaching, and orientation for users on how to use computing devices.
• Complete assigned tasks on time and ensure user satisfaction.
• Handle helpdesk duties as needed.
• Assist the Team Leader with Windows Server patching and report extraction duties.

Requirements:

• Recognized Nitec/Diploma in Computer Science/IT or equivalent.
• At least 1 year of experience in an IT-related role.
• Technical skills and experience supporting computing devices (Windows, iOS, and Android platforms).
• Ability to work independently and without supervision.
• Strong communication skills.
• Proactive and initiative-driven.
• Ability to multitask effectively.
• Good problem-solving abilities.
• Customer service-oriented.

For interested applicant, click 'apply'

EA Reg no: R1328476
EA License No: 16C8443
EA Personnel Name: Melody
EA Personnel No: R2095899

Responsibilities:

1、Responsible for the research and development of wireless communication system, positioning system, radar system, motor control system, baseband algorithm, positioning algorithm, bioradar algorithm, and motor control algorithm.

2、Complete design documents, support hardware development, participate in testing, analyze and solve various problems encountered in actual development.

Requirements:

1. Majors in signal processing, microelectronics, communication, computer, control, automation, applied mathematics, etc.

2. Master's degree or above.

3. Exposure to IC design is a plus.

4. Good English skills, communication skills, and willingness to work with a global team;

5. Good learning competency, self-motivated, and ability to work in diverse areas in a flexible and dynamic environment.

6. Fresh MS graduates are welcome.

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem-linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the role

You will be part of a cross-functional agile engineering team (squad) responsible to build, deploy and run (support) one or more of our digital products, focusing on full-stack experience to build robust & resilient systems (front-end & back-end).

You will work closely with Engineers, Product, Design, and other stakeholders, collaboratively ensuring quality gets built in the product, get to see your impact in everyday lives of many people, and have great fun while doing it.

You will share your learnings within and beyond your team (squad) and mentor budding engineers for good engineering practices

What will you do

• Working with engineering+product owners to design, refine and develop the product, from concept to implementation.
• Main contributor in creating best in-class product & experience for our customers by designing, building, scaling, and evolving our platforms, services, and tools
• Communicate, collaborate and work effectively across cross functional teams in a multicultural environment
• Mentor a team of highly talented and motivated engineers
• Ensure the performance, security, and responsiveness of applications built
• Continuously improve code quality, product execution, automatization and customer delight

What you need to have

• You have at least 10+ years of professional experience in a similar role developing highly scalable applications
• Good written and spoken English
• Hands on expertise in Java / Javascript or its derivatives (Typescript, NodeJS, Scala, Kotlin, Springboot, etc)
• Have hands on experience on one of this front-end development (Flutter Preferred)
• Experience to Lean/XP practices (TDD, Pair Programming, Continuous Integration/Delivery for both Mobile & Back-end)
• Experience working in Agile Software development
• Communicate, collaborate, and work effectively across distributed teams in a multicultural environment.
• You’re excited about delivering end-to-end experiences and care about your software architecture across the front-end, back-end, and the APIs that glue them together
• A passion for quality and best practices but with a pragmatism that understands the
  balance between perfection and delivering value in a timely manner.
• Enjoys mentoring more junior engineers on good engineering practices & share knowledge

Salary: Up to $2,900

Working Days: Monday to Friday
Working Hours: 9:00 AM to 6:00 PM
Contract: 1-year renewable contract (No bond)
Location: Currently at Pasir Panjang, relocating to Tai Seng at the end of December 2024

Job Responsibilities:

• Provide maintenance support to clientele, ensuring SLA commitments and requirements are met.
• Attend to incident calls and allocate tasks from the Helpdesk Team.
• Troubleshoot printers and projectors.

Requirements:

• Well-versed in the technical aspects of field projects, including equipment.
• Strong analytical and problem-solving abilities.
• Minimum 1 year of relevant experience.

For interested applicant, click 'apply'

EA Reg no: R1328476
EA License No: 16C8443
EA Personnel Name: Melody
EA Personnel No: R2095899

We are looking for a self-motivated candidate with expertise in high performance digital design and system level architecture modeling to join our Heterogeneous System design team. This candidate will work closely with IME's advanced packing team and contribute to the exploration, optimization and development of multicore & multi-chip system using IME's heterogeneous integration platform.

Job Description:

Digital IC Design and system-level exploration:

• Contribute to the design and development of digital integrated circuits, ensuring they meet performance and functionality requirements.
• Emphasize a system-level perspective in the design process, considering overall system architecture and functionality.
• Incorporate Edge AI principles into digital IC designs, enabling efficient and intelligent processing at the edge of the network.
• RTL implementation for custom circuit design using Verilog/SystemVerilog
• Derive specs and implement necessary customized and highly efficient building blocks such as systolic array, data path controller, scheduler, integer and floating-point processing engine, FFT, etc which are frequency used in various computing architectures.

Simulation, Verification, and Implementation:

• Conduct thorough simulation and verification of digital designs to validate functionality and performance.
• Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration
• Perform timing analysis and collaborate with the team to optimize designs for timing closure.
• Contribute to power analysis activities and implement power-efficient design techniques.

Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II.

Prepare detailed design documentation, including specifications, test plans, and reports.

Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues.

Bring creative and innovative solutions to design challenges, staying abreast of industry trends and emerging technologies.

Requirements:

• Master's, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

We are looking for a self-motivated candidate with expertise in high performance digital design and system level architecture modeling to join our Heterogeneous System design team. This candidate will work closely with IME's advanced packing team and contribute to the exploration, optimization and development of multicore & multi-chip system using IME's heterogeneous integration platform.

Job Description:

Digital IC Design and system-level exploration:

• Contribute to the design and development of digital integrated circuits, ensuring they meet performance and functionality requirements.
• Emphasize a system-level perspective in the design process, considering overall system architecture and functionality.
• Incorporate Edge AI principles into digital IC designs, enabling efficient and intelligent processing at the edge of the network.
• RTL implementation for custom circuit design using Verilog/SystemVerilog
• Derive specs and implement necessary customized and highly efficient building blocks such as systolic array, data path controller, scheduler, integer and floating-point processing engine, FFT, etc which are frequency used in various computing architectures.

Simulation, Verification, and Implementation:

• Conduct thorough simulation and verification of digital designs to validate functionality and performance.
• Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration
• Perform timing analysis and collaborate with the team to optimize designs for timing closure.
• Contribute to power analysis activities and implement power-efficient design techniques.

Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II.

Prepare detailed design documentation, including specifications, test plans, and reports.

Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues.

Bring creative and innovative solutions to design challenges, staying abreast of industry trends and emerging technologies.

Requirements:

• Master's, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

Responsibilities:

• Design, develop, and test electronic circuits for embedded systems.
• Develop and debug embedded software using C/C++ or other relevant programming languages.
• Implement software solutions and design interfaces to support robot integrations
• Perform circuit simulations and PCB layout design.
• Optimize power consumption, performance, and reliability of embedded systems.
• Collaborate with cross-functional teams to define system requirements and specifications.
• Conduct design reviews, testing, and validation of hardware and software.
• Provide technical support and troubleshooting for product development and production teams.
• Assist robot field testing, evaluate the performance of our systems, and create performance reports.
• Contribute to overall architecture design and documentation.

Requirements:

Technical qualifications:

• Background in Computer Science/Electrical Engineering/Mechanical Engineering with focus in robotics, mechatronics, or related fields
• Proficient in ROS or C++ or Python and embedded programming
• Strong knowledge of robotic platforms, robotics hardware (sensors, actuators), and networks (Ethernet, Ethercat, CAN, Modbus, RS232, etc)
• Experience in circuit design, PCB layout, and debugging using tools like oscilloscopes, logic analyzers, and multimeters.
• Familiar with Linux platform, its configuration, and command line operations

(1) Overview and purpose of the position*

1) Responsible in overseeing the performance of outsourced maintenance service providers in mechanical services and systems for the hospital and ensure functionality as well as serviceable at all times.

2)To audit and monitor service standards rendered by specialist vendor and outsourced maintenance service provider.

3)To provide support to Head of Department and Building Managers in capital nature replacements, systems and building improvement projects.

4)To coordinate and support hospital’s A&A and minor works.

(2) Accountabilities*

(2) Related Performance Indicators

1) Strong culture of staff and leadership accountability

• Work closely with FM Institution Lead and Mechanical Lead, in building clear scope, expectations and deliverables for the Mechanical team as well as planning for specialty training and develop the capabilities of Mechanical Team members.
• As a Subject matter expert to assist the Mechanical Lead in ensuring team members understands their scope.
• Work closely with team members, service provider and specialist vendors on system breakdown investigations, inspections, audits, review of maintenance program, etc.
• To lead / provide support in the investigation of incident/system failure to determine root cause of failure as needed.
• To participate and support in audits that the hospital subscribes to.

2) Contract management, evaluation, negotiation, and execution

• Manage Mechanical systems contracts to ensure timely renewals and contract requirements are fulfilled.
• Ensure timely renewal of authority licencing.
• Ensure processes are in accordance and compliance with Audit Compliance, NUHS Contract Management, Procurement and Finance Policies and Process.

3) Manage Managing Agent, vendors and liaison with authorities as well as communication to stakeholders

• To respond and support the maintenance agent and vendors in mitigating and recovery of critical system failure or incident.
• Work closely with Admin on compilation of contract documents, such as agreement, checklist, warranties, etc.
• Monitor vendors’ performance, deliverables and Key Performance Indicators (KPIs) are as per contract awarded.
• Perform invoice verification against works completed for timely processing of invoices.
• To ensure repair to reported system fault and breakdown are carried out in a timely manner.
• To carry out monthly analysis to Mechanical systems breakdown and recommend improvement plan as needed.
• Filing and documentation recording of all authorities’ correspondences.
• Conduct internal audits to check on non-compliances, identify gaps and follow-ups till closure.
• Represent Mechanical Team as the liaison party on authority matters.

4) Developing and implementing procedures, policies and checklists

• Review and update Standard Operating Procedures (SOP) and working instructions on a regular basis.
• Develop and harmonise trade related SOPs, Preventive Maintenance Checklists and working instructions with the cluster institutions for alignment to prevailing Singapore Standards / Code of Practices and/or industry best practices for benchmarking.

5) Asset Management

• Plan and oversee Mechanical system upgrades/improvements or replacements before their expiration or its end of life.

6) Projects

• Project Manager or render support to Project Managers for improvement works to existing hospital facilities such as renovation and retrofitting, replacement of system infrastructure and improvement initiatives to existing specialized systems and hospital facilities.
• Prepare Approval To Purchase (ATP) and Approval To Award (ATA) papers for Preventive Maintenance Contracts and projects.

7) Knowledge management

• Maintain good documentation (e.g records of all contracts, reports, agreements, check lists) with FM Admin team to ensure full compliance.

Required Competencies and Capabilities (Skills, Experiences and Professional Licences)

• Minimum three (3) years of relevant experience in management of mechanical systems operations. (Note: Minimum 8 years for Diploma Holders)
• Experience in Fire Safety/ Alarm System, Medical Gas/ Vacuum System, Lift and Escalator System, Pneumatic Tube System, Mechanical Automation system is advantageous.
• Health care experience is advantageous.
• Good interpersonal skills and customer service oriented.
• Positive work attitude, ability to work with all levels of staffs and strong team player.

Responsibilities

· Functional blocks and/or subsystems of digital ASICs from design to silicon verification. This includes RTL coding, verification, silicon validation, and qualification.

· Proactively work with other team members and partners to align on specifications, conduct reviews, and complete documentation.

· Contribute to ASIC roadmaps and future innovation.

· Develop technical leadership skills.

· Participate in co-development activities to help prototype ASIC designs in FPGA or other software models to support pre-silicon firmware development and verification.

Education And Experience Required

· BS or MS degree in electrical engineering or equivalent with focus on VLSI design experience

· Fresh MS graduates are welcome.

Knowledge And Skills

· Knowledge of submicron semiconductor technology

· Familiar with digital ASIC/SOC design flow from RTL to silicon characterization

· Familiar with Synopsys and Cadence EDA tools for Simulation, Synthesis, Timing (STA), Formal and Assertion based verification, etc.

· Familiar with design and programming languages: Verilog, System Verilog, Python, Perl, C, C++, etc.

· Ability to apply analytical and problem-solving skills

· Strong written and verbal communication skills, ability to negotiate design features and options

· Knowledge of embedded system design, verification, and product development lifecycle

· Deep knowledge and domain know-hows in ARM/RISC-V microprocessor subsystem

Job Description

• Prepare and execute testing activities

1. in support to one or several Projects on railway signalling systems under the direction of his / her hierarchy
2. according to the testing procedure / documentation and following Sub-system T&C Leader and / or PrCOM instructions

• Ensure defects identification and correction (trouble shooting)
• In the event of a non-conformity observed during the commissioning phase, make a return experience (REX) towards the project, and ensure that all design related issues are correctly reported in the adequate tools, including the defect description and associated test context
• Ensure follow-up of detected issues and deliver the commissioning reports.
• Check that the test tools are in perfect working order and calibrated.
• Support V&V team and perform test in lab as per request
• Deliver the committed performance in terms of Quality, Costs and Deadlines and in compliance with client policies, local standards and regulations (in particular EHS and Railway Safety)

Requirements

• This role would suit an energetic and experienced quality engineer who has worked with main and subcontractors for over 10 years
• Master's degree in engineering (preferably electronics or embedded systems) or equivalent experience.
• Railway and signaling knowledge, Previous Engineering, V&V, T&C or Maintenance for Railway Signaling is an asset.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Electrical and Computer Engineering (ECE) Department at the National University of Singapore (NUS) is seeking qualified applicants for the position of Research Engineer to join our team and contribute to our ongoing research projects related to IC design.

Responsibilities:

• Explore heterogeneous systems with silicon chips being integrated on unconventional substrates such as flexible and stretchable, for ultra-low power always-on and intelligent silicon platforms.
• Work on innovative circuit techniques with very wide power-performance scaling to minimize the system energy while providing targeted levels of performance on demand. Such techniques will be investigated for digital sub-systems in advanced technologies.
• Be responsible to conduct research at the circuit level, defining and validating design options and defining new integrated circuit techniques.

We offer a competitive salary commensurate with qualifications and experience, along with a stimulating research environment and access to state-of-the-art facilities. This is a full-time position with an initial contract duration of 12 months, with potential for renewal based on performance and funding availability.

Qualifications

The candidate must possess:

• Possess a Bachelor/Master’s degree in either Electrical Engineering or strictly related (e.g., Computer, Communication, or Information Engineering).
• Activity performed in multiple research environments and industrial experience are highly valued.
• Expertise on the project scope, ultra-low power always-on and intelligent silicon platforms.
• Knowledge on circuit and system-level chip design is valued.
• Analytical and problem-solving skills.
• Open to fixed term contract.

Responsibilities:

1. Engage in firmware/software development for communication systems, positioning systems, bioradar systems, and related products.

2. Engage in V-model development, which includes requirement analysis, high-level design, low-level design, implementation, unit testing, integration testing, and system testing.

Requirements (Firmware):

1. Bachelor’s degree or above, majoring in computer engineering, electronic engineering, communication, automation, applied mathematics, or other relevant fields.

2. Solid experience in C and C++ in the context of memory management and low-level driver development. Capabilities to build the toolchain with Python would be advantageous.

3. Experience with embedded operating systems such as RTOS would be appreciated. Knowledge of pre-emption, IRQ, and embedded communication protocols such as I2C, UART, and SPI is mandatory.

4. Experience with wireless communication technologies like UWB, BLE, WiFi, NFC, etc., is advantageous. Candidates with expertise in MAC and Link Layer will have an added advantage.

5. Preferred experience includes ARM Cortex-M series hosted microcontrollers. Candidates with solid experience in ESP32, Raspberry Pi, Arduino, STM32, or similar platforms will have an advantage.

6. Competency in using debugging equipment such as oscilloscopes, logic analysers, and FW debuggers is mandatory.

Requirements (Software):

1. Bachelor’s degree or above, majoring in computing, software engineering, computer science, applied mathematics, or other relevant fields.

2. Solid experience in C and C++ in the context of memory management (static, stack, heap) and GUI. Candidates with hands-on experience in creating Windows based application with IMGUI will have an advantage. Capabilities to build the toolchain with Python would be mandatory.

3. Candidates with experience in building applications that facilitate TCP/IP, UDP, etc., will have an added advantage. Knowledge and proficiency in data structures management are essential, including sorting algorithms, linked lists, stacks, queues, trees, and hash tables.

4. Knowledge or hands-on experience with multithreading concepts such as IPC, MUTEX, Time Slicing, and Pre-emption will provide a significant advantage.

5. Experience with wireless communication technologies like UWB, BLE, WiFi, NFC, etc., is advantageous. Candidates with expertise in MAC and Link Layer will have an added advantage.

6. Experience with software pipeline automation tools such as Jenkins is appreciated.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Responsibilities:

1. Circuit and system design of RF/analog transceiver IC based on CMOS technology

2. Schematic design, behavioral and circuit-level simulation, circuit implementation, layout design and test

Job Requirements:

1. A master's degree or above in microelectronics, communications, electronic engineering and other related majors; more than 3 years of relevant experience

2. Good know-how on RF/analog circuit theory and analysis; Good understanding of design process of RF/analog IC

3. Solid experience in the following module/block design and test: VCO, PLL, LNA, PA, MIXER, PMU, ADC, DAC, etc.

4. Good communication skills and team spirit.

5. Fresh MS graduates are welcome.

Responsibilities:

• Provide 2nd level onsite troubleshooting support in response to escalation from helpdesk to ensure consistently meet customer response / resolution times and objectives based on SLA
• Coordinate with equipment vendors and 3rd part suppliers to resolve issues
• Attend to customer enquiries (through phone and email) and follow-up on outstanding issues closely while ensuring that customers are kept updated on the progress
• Maintain call log database system and ensure all unresolved problems are escalated to the senior engineers
• Participate in adhoc projects when required

Requirements:

• Possess NITEC certification or Diploma in IT or relevant discipline
• Experience in desktop support and good working knowledge in Windows OS, Basic Network experience
• Minimum 2 to 3 years experience in customer support environment will be an added advantage
• Able to work under pressure and independently in a team environment
• Must be able to work in a fast-paced and dynamic environment
• Willing to travel around Singapore to multiple sites
• Able to work on rotating shifts

Responsibilities:

• Architect and implement scalable control and navigation solutions for AMRs utilizing your expertise in ROS, C++, and Python. Your focus will be on robustness, efficiency, and adaptability in real-world environments.
• Evaluate and integrate third-party systems (HW/SW) to enhance KABAM robots' capabilities.
• Conduct rigorous field tests to validate the reliability and performance of navigation systems in diverse outdoor conditions. Leverage insights gained to iteratively improve and optimize navigation algorithms, incorporating SLAM, motion planning, and perception techniques.
• Maintain comprehensive documentation of design, development, and deployment processes. Foster a culture of knowledge sharing within the team by presenting insights and lessons learned in regular sessions.
• Provide expert support for remote robot deployments at customer sites worldwide. Your troubleshooting skills and hands-on assistance will ensure seamless integration and operation of our solutions.
• Stay abreast of the latest advancements in robotics technology. Engage in continuous R&D efforts to explore new methodologies and technologies that can elevate the capabilities and performance of our AMRs. Implement findings to enhance existing systems and processes, keeping KABAM at the forefront of technological innovation.

Requirements:

• Education – Bachelors or Masters in Computer Science/Electrical Engineering/Mechanical Engineering with a focus in robotics, mechatronics, or related fields
• Experience – Bachelors (with at least 3 years relevant experience) or Masters (with at least 1 years relevant work experience)
• Industry – Previous experience in a robotics company preferred
• Supervisory – Personnel management is nice to have. Project management/technical lead experience is preferred
• Language – English (required), Mandarin (desirable)
• Technology – C++/Python, Linux, git, ROS; SLAM, motion planning, or perception techniques
• Coordinating the Work and Activities of Others — Yes
• Guiding, Directing, and Motivating — Yes
• Making Decisions and Solving Problems — Yes

1. Primary Responsibilities

• Quality Planning & Documentation: Develop, implement, and maintain a project-specific Quality Assurance (QA) and Quality Control (QC) plan that aligns with BCA CONQUAS standards, ensuring all quality processes meet assessment criteria.
• CONQUAS Compliance Monitoring: Monitor construction activities to meet CONQUAS requirements, ensuring each component (structural, architectural, and M&E works) adheres to the system’s quality benchmarks and detailed criteria.
• Material Inspection & Testing: Oversee the inspection and testing of materials used on-site, ensuring conformity with BCA-approved materials and standards under CONQUAS. This includes managing third-party testing agencies when required.
• Site Audits & Inspections: Conduct frequent site inspections and audits focused on CONQUAS criteria, including workmanship, material application, and defect minimization in structural, architectural, and M&E works.
• Non-Conformance Management (NCR): Identify, document, and address non-conformances, particularly those impacting CONQUAS scoring. Recommend corrective actions, ensuring rectifications align with quality standards to avoid future issues.

2. Collaboration with Project Team

• Coordination with Site Engineers & Supervisors: Work closely with site engineers and supervisors to ensure construction methods comply with CONQUAS specifications, providing guidance on quality protocols and rectifications as needed.
• Client & Consultant Interaction: Act as the primary quality liaison with clients and consultants, updating them on QA/QC matters and addressing quality concerns directly related to CONQUAS scoring.

3. Reporting & Documentation

• Quality & CONQUAS Reports: Prepare quality and assessment reports, including checklists and summaries that reflect compliance with CONQUAS scoring standards, inspection records, and non-conformance resolutions.
• Record Management: Maintain comprehensive QA/QC records, including BCA CONQUAS documentation, material certificates, inspection logs, and testing results.

4. Technical Skills and Knowledge

• CONQUAS Standards & Guidelines: In-depth knowledge of BCA’s CONQUAS standards, especially in structural, architectural, and M&E works criteria, assessment scoring, and inspection guidelines.
• Inspection Techniques & Tools: Proficiency in inspection techniques and tools that align with CONQUAS criteria, including non-destructive testing (NDT) and visual inspection practices.

5. Training & Development

• CONQUAS Training for Team: Train the construction team on CONQUAS requirements, quality assessment protocols, and best practices to enhance work quality and scoring.
• Continuous Improvement: Promote continuous quality improvement initiatives that reflect CONQUAS requirements, addressing observed quality gaps with updates to procedures.

6. Qualifications

• Education: Diploma/ bachelor’s degree in civil engineering, construction management, or related field
• Experience: 3-5 years of experience in a QA/QC role within the construction industry, with added experience in managing Quality Marks assessment processes or certifications a significant advantage
• Certifications: BCA-Approved CONQUAS training or relevant quality certification such as ISO 9001:2015 in Quality Management Systems.
• Skills: Strong analytical skills, attention to detail, and the ability to assess and improve quality standards.

7. Key Competencies

• Attention to Detail: Strong focus on details in line with CONQUAS quality metrics for structure, architecture, and M&E works.
• Communication Skills: Ability to clearly communicate quality standards, updates, and CONQUAS requirements to all team members and stakeholders.
• Problem Solving & Decision-Making: Effective in resolving quality issues that may affect CONQUAS scoring, ensuring timely solutions.
• Adaptability: Ability to adjust processes to meet dynamic project needs while adhering to CONQUAS standards.

Primary Objectives of Position

• Manage and maintain the NEL OCS System so as to ensure that the safety, reliability and availability of such services meet all regulatory requirements for MRT operation.

Major Responsibilities

• Liaise with external agencies on all matters pertaining to the NEL OCS system and equipment.
• Meet Operational targets for availability and reliability of Power Supply
• Ensure all equipment is operated and maintained in accordance with manufacturer recommendations and in compliance with legislative requirements.
• Procure all necessary tools, spares and services pertaining to the operation of the system.
• Plan and implement a cost effective and comprehensive maintenance program.ss
• Prepare and review maintenance contracts. Certifying outsourced maintenance contractor’s work, invoices, purchase order and variation order
• Develop and maintain Work Instructions in accordance with approved documented procedures.
• Ensure safe work and access for Main line and Depot maintenance activities.
• Lead in Failure Review and Corrective Action implementation.
• Responsible for the management of staff including participation in the selection, discipline and performance review processes.
• Responsible for the formulation of asset management plans, preparation of associated budgets and asset performance
• Participate in testing and commissioning of equipment.
• Implement and maintain Quality Management System
• Recruit, develop and supervise relevant Assistant Engineers and Technicians
• Undertake tasks and projects as assigned by the HOD or Section Head.

Specific Safety Responsibilities

• Responsible for maintaining the technical standard for Electrical Power Distribution equipment so as to ensure the highest level of operational safety for the MRT system.
• To enforce Departmental Works Instruction system and all Rail related safety rules and procedures.
• Responsible for the safety of departmental staff, related contractors and others working on the Electrical Distribution system in the NEL MRT premises

Job Specifications

Minimum Education / Qualifications

• Degree/Diploma in Electrical and Electronic or Mechanical Engineering

Minimum Years of Relevant Experience

• Preferably at least 5 years of working experience in both LV and HV environment, preferably in a rail transportation environment.
• Electrical Power System background
• Preferably EMA Licensed Electrical Worker (Technician Grade)

Knowledge/Skill

• Strong interpersonal skill
• Possess strong technical skills

Attributes

• Strong people, planning and organizing skills.
• Resourceful, self-motivated and result oriented.

Job Description:

• 5+ years of experience in software testing.
• Strong experience in web services testing using SoapUI or Postman.
• Experience in web application testing is required.
• Familiarity with automation testing using Selenium, Cucumber, or QTP is a plus.
• Hands-on experience in testing activities, with a willingness to write and execute test cases on a daily basis.
• Proficiency in at least one test management tool and one defect management tool is required.
• Experience in sanity testing, regression testing, and system integration testing (SIT).
• Knowledge of the Software Testing Life Cycle (STLC) and testing processes is essential.
• Good attitude and strong communication skills are required.
• Willingness to learn and adapt during the ramp-up period; must be able to become hands-on quickly.
• Exposure to Selenium automation development is preferred.

Education:

Bachelor’s in computer science, Computer Engineering or equivalent/higher

Language:

Fluent written and spoken English