Responsibilities

• Ensuring all sub-contractors comply fully with the relevant recommendations of LTA M&W requirements
• Preparing and submitting the Weekly & Monthly Quality reports.
• Follow up with conformity certificate, calibration certificate and plant calibration certificate from other agency.
• Maintaining the RIN Register and follow up with QPS for closing.
• Review daily inspection report and issuance of observation or NCR (Non Conformity Report) according to concerned department.
• To arrange QPS for inspection including the reinforcement cages, sitting out, guide wall, slurry quality (powder moisture, slurry density, viscosity & gel strength), final depth pf trench,trench profile check (koden alignment check), stop end, inserts, concrete slump, temperature, casting duration, cut-off level, ground level, backfilling (LSS) and lean concrete.
• To be physically present during Asphalt pavement work for Road diversion work.
• Study Shop drawing and liaise with design department on the design issue that may cause difficulty in production.
• To conduct mould inspection for every new mould and mould in use.
• Materials ordering
• To arrange production based on Daily Production Planning from planning department.
• Responsible for achieving the daily planned volume/productivity.
• To prep our inspection together with production supervisor and RTO

Requirements

• Degree in any Engineering Discipline
• Minimum 5 years experience in QA/QC works in railway construction, with at least 1 year LTA MRT experience.
• Experience in structural steel works or precast RC works
• Good interpersonal skills and communication skills
• Open to 6D work week with long working hours to meet tight project deadline.

Location: Jurong East

Working hours - Mon – Fri, 8.30am – 5.30pm

Requirements

• Handling of equipment for military and security (eg Chemical Detector, Radiation detector, Biological Detection Systems for Military , Acoustic Hailing Equipment / System etc)
• IT software installation and configuration.
• Handling enquiries on products such as post-sales delivery of equipment
• Carry out maintenance,diagnostic analysis, trouble shooting and repair work for equipment.

Requirements

• Higher Nitec / Diploma in Electrical & Electronics Engineering with min 5 years relevant experience
• Experience in customer relations.
• Able to do Stand-by duty if required

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Job Requirements:

§ Degree in Information Technology or equivalent

§ Must have minimum 6-8 years of experience in developing software solutions for Java EE web application and Java UI frameworks

§ Must have 5-7 years of experience in Java/J2EE, Spring and Hibernate

§ Must have experience in Agile Development with a good understanding of Agile delivery

§ Good to have Certifications in Java, Java EE etc

§ Excellent written and verbal communications skills

Job Description

• Industry/ Organization Type: Manufacturer – Metal Stamping
• Position Title: Principal Tooling Engineer /Principal Engineer – Tool & Die
• Working Location: West (Transport provided at Boon Lay/Pioneer)
• Working Hours: 5 days (Mon – Fri, 8.30 am – 5.30 pm)
• Salary Package: Basic up to $6000 + AWS Variable Bonus + $30 Mobile Claim
• Duration: Permanent Role

Key Responsibilities

• To lead the tooling team in problem-solving, identifying issues, and conducting root cause analysis.
• Analyze and improve stamping processes for cost reduction and quality enhancement.
• Investigate technical issues and analyze defects.
• Provide technical support to Sales and ensure tooling feasibility for customers.
• Lead cross-functional teams to streamline operations, reduce cycle times, and cut down on waste.
• Manage all documentation to comply with ISO9001, IATF16949, ISO14001, and ISO13485 standards.
• Enforce safety protocols and ensure a safe working environment while complying with industry standards.
• Develop and implement preventive maintenance plans to prolong tool life and reduce downtime.
• Promote a culture of continuous improvement using Lean Manufacturing and Six Sigma methods.
• Regularly monitor and report on key performance indicators (KPIs).
• Maintain detailed records of all tooling modifications and maintenance.
• Collaborate with Production, NPI, Quality Control, and Operations teams to optimize tooling effectiveness.
• Handle additional responsibilities as assigned by management.

APPLY NOW!!!

• At least 3 years of relevant experience.
• Minimum Diploma in Precision Engineering or equivalent technical qualification in Tool and Die making required.
• Strong commitment to safety and regulatory compliance.
• Proficient in Lean Manufacturing and process optimization.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69620 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Role: Environment Build Engineer
Job Level: More than 10 years of relevant experience
Duration: 12 months
No. of resources needed: 1

Key responsibilities:

• Lead and oversee the environment readiness, review, track and report the overall infra delivery and environment delivery for MPP Program
• Actively manage the dependencies and coordinate with infrastructure and application teams to resolve dependencies.
• Coordinate with Infrastructure Build teams to assign resources (cluster, storage, network) to build MPP Program
• Discuss and finalize the environment strategy and end to end integrated environment approach.
• Perform environment assessment and collate the details in environment inventory covering connections across all applications.
• Co-ordinate with core infrastructure team to ensure readiness of servers / databases, prepare requirement document.
• Drive the low-level design for application middleware infrastructure for critical applications.
• Orchestrating the environment connectivity setup activities with sever build engineers.
• Gathering requirement and setup connectivity between file gateway, file store to target migration environments work with internal departments.
• Actively manage the dependencies and coordinate with infrastructure and application teams to resolve dependencies.
• Track and report the migration environment build to program management office and provide daily update on the progress to
• Coordinating with application stream leads to review the data refresh requirement for migration environments and plan releasing the end-to-end integrated environment.
• Act as one of the main points of contact for MPP Build delivery coordinating across managed service partner resources and update the status and highlight the risks.
• Manage environments demand management of all other dependent upstream and downstream applications and Environments.
• Define the monitoring requirement and coordinate with monitoring team to implement the container service status and platform specific monitoring.
• Support application specific monitoring and enable platform to support environment planning, assessment, and approach for Troubleshoot server and network related problems.
• Prepare the system and database backup/restore procedures.
• Working experience in application integration platform (MQ, Connect Direct)
• Technical hands-on experience in building application middleware platforms
• Familiar with system and database backup/restore, disaster recovery procedures and Load balancers.
• Troubleshoot Control M job failures and assist in re-run as appropriate.

Key Skills :

• Middleware: JBOSS, WebLogic, WebSphere, Apache, Iplanet
• Messaging Platforms: WebSphere MQ, Sterling CD, SFTP and API's
• Infrastructure: Solaris, Linux, Oracle DB
• DevOps Tooling: Jenkins
• Scripting / Coding: Shell Scripting, PYTHON, Groovy

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Job Responsibilities:

• Preparing the test environment, designing, and developing the test cases.
• Preparing the test environment, executing the test procedures.
• Automating the test solution based on the system design using scripting or programming languages as well as performance tuning.
• Create traceability to requirements, analyze gaps and address them.
• Logging and tracking defects to closure
• Conducting test reviews with internal and external stakeholders.
• Perform root cause analysis for production and user acceptance defects, address test gaps to ensure test efficiency.

Job Requirements:

• Tertiary qualification in Information Technology or Engineering
• At least 3 years’ relevant experience in executing testing and developing test automation solutions involving devices (UI-based or embedded) and/or back-office systems with familiarity on the full system development lifecycle from requirement, development, to testing and deployment;
• Good written and verbal communication skills;
• Able to work well both independently as well as in a team;
• Certification in software testing preferred;
• Experience in payments industry and automation testing is a plus

• Design, develop, implement, and maintain software systems.
• Collaborate with team leads to understand client needs, assess technical implications, and estimate project timelines.
• Create, update, and review technical documentation.
• Oversee offshore teams, ensuring adherence to quality standards and technical guidelines.
• Review code for potential issues, conduct unit and integration testing, and support user acceptance testing.
• Develop deployment strategies, support production environments, troubleshoot issues, and implement corrective actions.
• Perform other tasks as assigned.

Job Requirements:

• Bachelor's degree in Computer Science or Information Technology with at least 5 years of software development experience using Java (J2EE, Spring Framework) and frontend technologies (JavaScript, Angular, AngularJS), preferably in a banking or financial setting.
• Experience working with offshore teams.
• Hands-on experience with deploying and managing cloud-native Java applications on Microsoft Azure.
• Knowledge of the Newgen BPM system.
• Strong understanding of software development life cycle methodologies, including Waterfall and Agile.
• Excellent communication, presentation, and interpersonal skills.
• Self-motivated, proactive, and able to work independently or as part of a team. Demonstrates a strong sense of responsibility and ownership.

To apply, please visit www.gmprecruit.com and search for Job Reference: 24991

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

• Carry out Level 2 systems administration tasks, including system monitoring, management, disaster recovery, and capacity planning.
• Support the management of on-premises and cloud systems across Microsoft, AIX, Virtual (VMWare or Hyper-V), Amazon Web Services (AWS), Azure, and Microsoft 365 infrastructure such as Entra ID, Exchange Online, SharePoint, and Teams.
• Contribute to the design, setup, configuration, implementation, and deployment of new server environments and cloud technologies on Azure or AWS.
• Plan and allocate IT resources for tasks or projects, including budget preparation and capacity planning.
• Maintain and update technical documentation related to systems administration for on-premises systems, AWS, Azure, and Microsoft 365 cloud infrastructure.
• Perform system maintenance, upgrades, patch management, and resolve incidents during non-business hours as required.

Requirements

• At least 4 years of experience in system support and server administration, including implementing and managing cloud infrastructure, with a strong understanding of Azure and Amazon Web Services (AWS) cloud technologies.
• Practical experience in implementing and configuring Azure and AWS services such as virtual machines, application services, load balancers, SQL Managed Instances, site-to-site VPNs, storage solutions, networking, security, logging, and monitoring.
• Hands-on experience in managing on-premises environments, including Windows Server, VMware vSphere, and Hyper-V.
• Proficient in administering Microsoft 365 cloud technologies such as Exchange Online, Entra ID, SharePoint Online, Microsoft Defender, and Microsoft Intune.
• Familiarity with AIX/Unix systems and other IBM products (e.g., IBM WebSphere MQ, WebSphere, Tivoli Storage Manager Backup) is a plus.
• Relevant certifications in Azure, Microsoft 365, or AWS technologies (e.g., Azure Administrator Associate, Endpoint Administrator Associate, or AWS SysOps Administrator) are advantageous.
• Skilled in project and people management, capable of working both independently and collaboratively within a team.

To apply, please visit www.gmprecruit.com and search for Job Reference:24690

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

Job Responsibilities:

Test Planning and Strategy

• Lead the development of comprehensive test strategies and plans in collaboration with stakeholders.
• Define test objectives, criteria, and priorities based on software requirements and business goals.
• Ensure alignment of testing efforts with project timelines.

Test Execution

• Execute hands-on testing, including manual and automated testing, to verify software functionality, performance, and security.
• Conduct rigorous regression testing, exploratory testing, and user acceptance testing (UAT).
• Review and approve test cases and test scripts for accuracy and coverage.

Test Automation

• Develop and maintain automated test scripts using industry-standard tools and frameworks.
• Champion test automation best practices and contribute to the growth of automation coverage.
• Continuously improve the test automation infrastructure for efficiency and scalability.

Defect Management

• Establish and maintain a defect-tracking system.
• Ensure defects are documented, prioritized, and resolved in a timely manner.
• Communicate defects and testing progress to stakeholders.

Collaboration and Communication

• Collaborate closely with software developers, product managers, and other stakeholders to resolve issues and improve product quality.
• Communicate testing status, results, and recommendations to senior management.

Test Documentation

• Create and maintain test documentation, including test plans, test cases, and test reports.
• Ensure that testing documentation is up-to-date and accessible to the team.

Job Requirements:

• Proven experience as a Software Test Engineer, with a focus on automation and leadership.
• Strong knowledge of software testing methodologies, tools, and best practices.
• Proficiency in programming/scripting languages (e.g., Typescript, Svelte, Golang).
• Extensive experience with test automation tools and frameworks (e.g., Playwright, Testify, Selenium).
• Excellent problem-solving skills and attention to detail.
• Strong communication and collaboration skills.
• ISTQB or similar certification is a plus.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Our Client is in the Manufacturing Industry. Due to their current expansion plan, they are looking for an Automation Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Manage and maintain site automation systems, including ABB 800xA, Control Builder, Schneider Quantum, ProWORX 32, and industrial network infrastructure.
• Administer VMware setups, server/workstation configurations, FIX32 database/graphics, MES/DCS/SCADA/PLC systems, label applicators, and ABB robotic palletizer systems.
• Implement automation and control solutions for plant modifications, capital projects, and improvement initiatives in alignment with specifications, budgets, and procedural guidelines.
• Provide expert advice and support for troubleshooting, optimizing processes, and improving systems.
• Ensure compliance with safety and operational standards, maintain inspection readiness, and participate in audit activities as required.
• Lead, mentor, and develop junior staff to enhance their skills and contribute to achieving departmental goals.
• Assist in preparing the section’s annual operating budget to meet operational and strategic objectives.
• Plan and execute maintenance schedules, manage resources during maintenance activities, and address breakdowns effectively, including engaging external expertise when needed.
• Support facility master planning to ensure compliance with engineering standards, address obsolescence, and manage asset replacements.
• Monitor and maintain automation systems to ensure seamless plant operations and minimize production disruptions.
• Address customer complaints and deviations by ensuring timely implementation of corrective engineering actions.
• Any ad-hoc duty as given

Requirements

• Min degree in the relevant engineering discipline
• Min 3 years of relevant experience in the process/food industry
• PLC experience in ABB 800xA, Scheider or Siemens
• Good understanding of local codes and requirements
• Experience in Control systems both in maintenance and plant commissioning

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Company:

Sopra Steria is a listed European tech leader specializes in Consulting, Digital Service, and Software. We have 60,000 employees worldwide located in different regions (Europe, North America and Asia), whereby Singapore is the HQ for APAC. EvaGroup Asia Pacific is part of Sopra Steria I2S APAC, in charge of Infrastructure, Cloud and Cybersecurity services.

Descriptions:

For this position, we are looking for an ICT Security Engineer proficient in Elastic Stack to assist one of our clients – a leading global investment bank.The team is looking for an ICT Security Engineering professional to increase its capability to improve the detection & reaction to Cyber Threats by:

• Deploying, maintaining and improving the new SIEM infrastructure

The new joiner will work in close collaboration with Production Infrastructure & Observability teams. Finally, the new joiner will fully be part of the Production CSIRT / SIEM Engg team with the opportunity to expand the scope of activities within the team.

Responsibilities:

• Install and administrate the servers of the SIEM Infrastructure
• Develop automation on the different tasks and self-service tool
• Participate to the integration of new technologies logs
• Support logs parsing using custom parser/GROK development
• Project management
• Be a full time member of the Production CSIRT / SIEM Engg team and participate to the various activities of the team
• Contribute to the Permanent Control framework for implementation of policies and procedures in day‐to‐day business activities, such as Control Plan.
• Comply with regulatory requirements and internal guidelines.
• Contribute to the reporting of all incidents according to the Incident Management System

Requirements:

Production experience across the following technologies:

• Working knowledge of Elastic stack (Elasticsearch / Logstash / Kibana / Beats) including data ingestion, management, monitoring & analytics. (Mandatory)
• In-depth experience with Kafka
• Good working knowledge of Linux (RedHat/Ubuntu)
• Programming skills (Python or Bash) is appreciated.
• Experienced production support engineer
• Platform integration skills are a plus - Experience in installation, configuration, documentation and administration of multiple pre-production and production platforms in both virtual and physical environments.
• Experience & skills in automation tools (e.g. Ansible) & DevOps pipelines are appreciated.

Specific Requirements:

• Candidate must have a overall 7 or more years of experience with minimum 4-5 years on relevant scope ie. Expertise in handling ELK stack for large platform or architecture.
  

JOB DESCRIPTION

1. Perform concept design studies, sketch plans, and criteria/facilities programs for projects as required

2. Perform technical review of drawings and required design submission on assigned projects, and to ensure conformance with company design standards

3. Participate inter-department coordination on all project related issues

4. Provide design guidance to client and their consultants, as well as internal design and construction staff to adapt company design standards

5. Conduct site visits.

6. Maintain and update project review templates and quality control checklists

7. Provide recommendation for design changes to address customer satisfaction, operational concerns, company standard, and development strategies

8. Assist and to maintain and develop company standard documents and work flow

9. Maintain on policy, methods, and systems support matters

10. Any other relevant tasks as assigned by Project Manager

JOB QUALIFICATION

1. Minimum Bachelor Degree in related / Engineering profession

2. A minimum of 5 years of progressive experience in semicon-related project.

3. Good design skills, technical and communication skills.

4. Be confident, assertive and independent

5. Possesses intermediate knowledge of applicable codes, and implications on design

6. Advanced ability to work in team environment and supervise others

7. Ability to plan and manage design team efforts to effectively meet deadlines

8. Good interpersonal skill and attention to detail

9. Ability to work well in high volume, fast-paced environment as a member of a collaborative team

10. Proficient in electronic mark-up software, MS Office, MS Project, Sketchup, AutoCAD, BIM and other relevant 3d softwares.

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Controls Engineer (PLC)
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 8.30 AM – 6 PM)
• Salary Package: Basic Salary up to $5,000 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Responsible for assisting the design of controls system and programming coding to meet the budget and time expectations as defined by the Project Manager.
• Modify controls design and other documents according to the compliance with industry standards according to customer URS.
• Develop specific program per customer and project requirements based on Company's Coding Standard.
• Participate in controls and validation activities, conduct test and debug, internal buy-off, FAT and SAT.
• Work together with the Customer, Project Manager, Assistant Project Manager, Process Manager, Design Engineers and other project team members as required.
• Communication with Customer as per project requirements.
• Collaborate with suppliers as needed.
• Update PCT and task completion accordingly.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 3 years of working experience with controls systems and programming
• Knowledge of Allen Bradley and Siemens-S7 programming

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69404 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Building & Construction
• Position Title: Site Engineer
• Working Location: Pioneer
• Working Hours: 5.5 working days (Mon to Fri 8 AM – 5 PM, Sat half day)
• Salary Package: Basic Salary up to $6,500 + AWS + Variable Bonus + Transport Allowance
• Duration: Permanent

Key Responsibilities

• Handle daily construction activities, ensuring works progress according to the project schedule, design, and safety standards.
• Provide technical support and guidance to construction workers, subcontractors, and other engineers on-site.
• Ensure that construction methods and materials used meet project specifications and quality standards.
• Coordinate with project managers, contractors, and other team members to ensure smooth and successful execution of the project.
• Conduct regular inspections of construction activities to ensure the quality of work meets industry standards and the specific requirements of the project.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum Diploma in Civil Engineering or related qualification
• Has experience with the Land Transport Authority (LTA), Strategic Planning Policy Group (SPPG), or Defence Science and Technology Agency (DSTA)
• Prior experience with road and airfield runway construction and resurfacing is required
• Proficient in MS Office
• A class 3 driving license is required

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69580 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/Organization Type: Supply of Environmental Systems
• Position Title: Sales & Project Engineer
• Working Location: Boon Lay
• Working Hours: Monday – Friday, 8.45 AM – 6.15 PM
• Salary Package: Basic Salary up to $4,500 + HP Allowance + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and understanding clients’ requirements and assessing equipment needs, preparing and delivering sales proposals, technical presentations.
• Maintain relationships with suppliers and stakeholders.
• Provide continuous after-sales support such as aiding clients to identify problems with installed equipment (if any), recommending improved material, machinery or parts for replacement and maintenance.
• Direct and monitor daily activities to align the project progress and quality goals.
• Implement and adhere to the sales plan set by the manager with the aim of expanding the company’s customer base.
• Collaborate with team to compile information for tender submissions.
• Actively enhance personal knowledge of supplier’s products to introduce technology that adds value to the clients.
• Evaluate sales activities with the management weekly, including the status of prospective customers, plans to meet sales targets and status on deadlines.
• Collaborate with Sales Manager, producing reports regularly to communicate with supplier on sales activities and status of project.

APPLY NOW!!!

• Minimum Diploma in any engineering field.
• Candidates with at least 1 year of Sales experience will be advantageous.
• Candidates without experience are welcome to apply as training will be provided.
• With prior experience with tender systems such as Gebiz
• With Class 3 Driving License.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69796 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Key Responsibilities

1. Deployment & Integration

Lead the deployment of SHIP and HATS solutions in government cloud environments such as AWS, Microsoft Azure Government, or Google Cloud for Public Sector.

Develop and implement Infrastructure-as-Code (IaC) templates for secure and automated deployments using tools like Terraform, CloudFormation, or Ansible.

Integrate SHIP with existing Continuous Integration/Continuous Deployment (CI/CD) pipelines to enhance development and testing workflows.

2. Secure Testing Solutions

Deploy and manage Hive Agile Testing Solutions (HATS) to support end-to-end automated testing for secure applications.

Configure testing environments for load testing, performance testing, and vulnerability assessments.

Ensure seamless integration between SHIP and HATS for secure, agile development processes.

3. Security & Compliance

Implement and enforce security controls in alignment with government standards such as FedRAMP, FISMA, and NIST 800-53.

Manage Identity and Access Management (IAM) policies and role-based access controls (RBAC) for secure resource access.

Conduct regular security audits, vulnerability scans, and compliance checks on SHIP and HATS deployments.

4. Performance Optimization

Monitor and optimize the performance of the SHIP pipeline and HATS testing environments to ensure high availability and scalability.

Identify and resolve bottlenecks in the pipeline to maintain efficient workflows.

Ensure robust logging, monitoring, and alerting solutions are in place for proactive issue management.

5. Collaboration & Reporting

Collaborate with cross-functional teams, including development, testing, security, and infrastructure teams, to ensure smooth deployment and integration.

Create and maintain detailed documentation, including architecture diagrams, deployment guides, and system configurations.

Provide regular updates to government stakeholders on project progress, performance metrics, and compliance status.

Preferred Skills

Prior experience working in a government (GCC and GCC+) environment.

Familiarity with DevSecOps practices and security automation.

Proficiency in Infrastructure-as-Code (IaC) and automation tools like Terraform, CloudFormation, and Ansible.

Responsibilities:

• Part of the VSAT product development team involved in designing LNA, Power Amplifier, Up/Down Converter operating up to Ka band frequencies

Requirements:

• Bachelor's Degree in Electronics Communication Engineering
• At least 3 years of experience in any RF system/sub-system design
• Experience in RF circuit design like LNA, PA, Up/Down Converter, Synthesizer etc
• Working knowledge of RF test and measurement equipment
• Experience in using simulation software such as AWR, ADS, HFSS etc
• Experience in VSAT system or subsystem design is an added advantage
• Monthly basic salary: S$4000 - $6800
• Working hours: 8.30am to 6pm
• 5 days work week
• Singaporean or PR only

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

Alternatively, you may send your application and resume in MS Words format to [email protected] or Whatsapp to 8767 9648

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

K N Tan
Registration Number: R1768143
EA Licence No: 17C8778 (JIH SUN EMPLOYMENT AGENCY)

R:4YDw1YA18

Job Summary

A great opportunity as a Data Engineer to work in cloud based data engineering, analytics and data management team in a well established company.

Mandatory Skill-set

• Bachelor's Degree in Computer Science or equivalent;
• Minimum 5 years of experience in data engineering and data management;
• Hands on technical experience in Azure Data Factory, Databricks, Synapse, SQL Server Integration Services;
• Strong experience in Python / SAS / R along with Tableau / Power BI;
• Strong experience in gathering business requirements and translating into technical specification;
• Strong analytical skills with high curiosity to deep dive into root cause of problems and suggest solutions;
• Has good stakeholders management experience;
• Attention to technical details;
• Ability to deliver tasks on time with high quality outcome;
• Self motivated and ability to take ownership;
• Strong written and spoken communication skills.

Desired Skill-set

• Azure Data Engineer Certified;
• ITIL certified;
• Prior experience in Python, R or Machine Learning tools.

Responsibilities

• Design and develop data models, ETL pipelines, data integration process while ensuring data accuracy and quality;
• Perform data analysis of structured and unstructured data and perform business intelligence initiatives such as build user friendly reports using data visualization tools;
• Analyze ETL requirements from users and provide solutions accordingly;
• Responsible for planning and executing data profiling and data quality analysis;
• Monitor data pipelines, databases and analytical processes to ensure smooth operations;
• Identify and resolve data-related issues, performance bottleneck and data quality problems;
• Design and document data catalogs and data architectures;
• Perform regular data cleansing exercise to ensure that data is of high quality and relevant to the business needs;
• Execute data transformation, correction and aggregations to ensure compliance with business / regulatory requests;
• Build and maintain reports and dashboards using suitable data visualization tools;
• Conduct analysis on the reports and translate the findings into valuable insights to business users;
• Prepare data for prescriptive and predictive modelling;
• Perform database monitoring and performance tuning.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

Job Description

• Industry/ Organization Type: Manufacturing / Construction
• Position Title: Project Engineer
• Working Location: Senoko
• Working Hours: 5 days (Monday to Friday, 8.30 AM – 6 PM)
• Salary Package: Basic Salary up to $2,800 + Transport Reimbursement + Mobile Allowance + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Report to the Project Director on the financial aspects, timelines, and resource allocation for project operations.
• Keep thorough records and verify the precision of all drawings and plans to meet project and client demands.
• Participate in meetings with clients and site visits.
• Build and nurture positive relationships with clients.
• Perform additional duties as directed by superiors.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum Diploma in Electrical Engineering or equivalent
• Has 1-2 years of relevant working experience
• Proficiency in AutoCAD and/or Microsoft Project is an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67096 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• To provide onsite technical and troubleshooting services covering below support activities within the required SLA time frame.
• Hardware support: Technical diagnosis and coordination with OEM vendors for repair of defective hardware for a variety of devices including desktops/laptops/workstations, mobile devices, tablets, meeting room equipment, printers etc.
• Software support: diagnosis and resolution of software functionality for both the operating system and standard desktop applications
• IMACD: physical installations, moves, adds, changes, and de-installs for a wide variety of supported hardware devices including desktops/laptops/workstations, mobile devices, tablets, meeting room equipment, printers and etc. and supported software
• Enhanced support for VIP users
• Coordinate with infrastructure teams to resolve issues with network, servers or other infrastructure devices or services that impact the normal work of end users
• Support hardware and software changes (e.g. hardware device change/refresh, system upgrade/migration, patch update, etc.) for end users
• Asset management support for end user devices by following defined processes
• Provide smart hand support for all kinds of hardware such as printers, servers, network devices, backup devices, meeting room equipment, scientific devices etc.
• Onsite support for events such as trade shows or special meetings
• Regular checks for IT Room devices and Meeting Room equipment when required
• Deployment services for large-scale efforts include asset auditing and discovery, project support, image integration, on-site installation, user self-installation, migration, and asset recovery governed with full project status and reporting

Job Requirements

• Diploma / Nitec in Information Technology, Computer Engineering, Electronics or related field
• 1 to 2 years of IT experience in Corporate work environment
• 5 days work at Raffles Quay
• MNC work environment
• Salary $2700 - $3100

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Assistant Engineer / Mechatronics Assistant Engineer
• Working Location: Woodlands
• Working Hours: 5 days’ work (Mon – Fri: 8am to 6pm)
• Salary Package: Up to $3000 + AWS
• Duration: Permanent Role

Key Responsibilities

• Perform electrical wiring including installation, servicing and troubleshooting of machine equipment
• Identify and document issues in assembly and testing phases
• Conduct on-site machine commissioning and client training
• Complete in-house automation machine assembly and wiring
• Analyze and solve machinery issues during testing and commissioning

APPLY NOW!!!

• ITE/Diploma in Engineering or related field
• Individuals without experience but with a keen interest in engineering are encouraged to apply

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66189 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Key Responsibilities:

• Manage and optimize cybersecurity solutions including IDS/IPS, email defenses, EPP, DLP, vulnerability management, PAM (Cyberark, Beyondtrust), IAM/IGA, DAM, proxy, and NGFW.
• Oversee daily operations and security solution design, implementation, and documentation.
• Implement and refine cybersecurity solutions; ensure secure-by-design principles are followed.
• Support security incident response, containment, and recovery; conduct cybersecurity awareness training.
• Stay updated on industry trends and support team and cross-department needs as required.

Requirements:

• Degree/Diploma in Computer Science, Engineering, or Information Security.
• Experience administering solutions like Cyberark, Beyondtrust, Trendmicro, Tenable, and IMPERVA; strong knowledge of Linux, Unix, and Windows.
• Familiarity with scripting (Python, PowerShell) and AWS security operations; security and product certifications (e.g., GSEC, GCIA) are advantageous.
• Understanding of regulatory standards (MAS Cyber Hygiene, Technology Risk Management) and cybersecurity practices.
• Strong problem-solving, communication, and project management skills.

Visual Analytics Platform Engineer

Full Description of Position

Our company is a global health care leader with a diversified portfolio of prescription medicines, vaccines, and animal health products. The difference between potential and achievement lies in the spark that fuels innovation and inventiveness; this is the space where we have codified its legacy. Our success is backed by ethical integrity, forward momentum, and an inspiring mission to achieve new milestones in global healthcare.

Our Information Technology organization partners with colleagues across the business to help serve our patients and customers around the world. Ours is a high energy team of dynamic, innovative individuals dedicated to advancing our contribution to global medical innovation by leveraging information and technology to efficiently advance the business by driving revenue and productivity.

One of the key priorities for us is a significant focus on data and its utilization as a strategic asset to drive insights-driven decisions.

The Visual Analytics team, which is under Consumption & Insights Generation organization, part of the Central Data & Analytics within Chief Technology Office, is responsible for creating a seamless experience for analytics experts to harness the potential of data and interactive analytics through a unified platform across the enterprise – from scientific/clinical to commercial across all company's locations.

Part of the Visual Analytics team are a group of Platform Engineers who are responsible for managing components that form the company enterprise analytics platforms. In this role, you will act as platform engineer for the Visual Analytics platform that serves a diverse group of. The role will require the ability to technical engineering of the platform and hands on working knowledge creating data visualizations as a user of the platform.

You may have a software development background, or an engineering background or you were raised in a modern data analytics culture from the start of your career. You will have the ability to work with technology vendors, support resources, delivery partners, stakeholders, and apply emerging and traditional technologies for analytics improvements in support of enterprise analytics platform strategy.

Primary job responsibilities include:

• Support architecting, designing, planning, building and operating activities related to Visual Analytics platforms.
• Coordinate geographically distributed teams in support of platform engineering activities; automation, upgrade and patch coordination, platform administration guidance, monitoring, troubleshooting and performance analysis.
• As a subject matter expert drive the definition of best practices, platform governance and platform delivery guidelines.
• Support Visual Analytics technology roadmap and future state capabilities.
• Write technical documentation including, but not limited to configuration artifacts, infrastructure/technical diagrams, installation qualification and validation documentation.
• Maintain current industry knowledge of Visual Analytics best practices and procedures.

Qualifications, Skills & Experience

We are seeking professionals with the following qualifications, skills and experience:

Education Minimum Requirement:

• BSc in IT, Engineering, Computer Science, or related field.

Required Experience and Skills:

• 6+ years’ experience with at least 4+ years of demonstrated platform engineering area using Agile methodologies.
• Experience in building and supporting large scale visual analytics platforms and solutions using modern cloud technologies.
• Excellent interpersonal and communication skills, with the ability to quickly establish credibility and trust with a variety of stakeholders.
• Familiarity with Release Management, Problem and Incident Management, Software Development Life Cycle best practices and project methodologies such as Waterfall and Agile.
• Confident individual who is organized, able to coordinate teams and activities in a complex international environment.
• Demonstrated ability to clearly communicate technical and non-technical information verbally and in writing.
• Excellent interpersonal and communication skills, with the ability to quickly establish credibility and trust with a variety of stakeholders.

Desired Experience and Skills:

• Familiarity with Spotfire, Qlik Sense, Power BI, Planning Analytics or other Visual Analytics tools
• Agile and/or Product Management Certifications.
• Prior experience in Enterprise SaaS product management with successful traction in development, launch and growth of products.
• Certifications in one or more cloud technologies
• Prior experience in developing and launching multi-tenant platforms that cater to technical user base
• Previous experience in Life sciences and Pharma domain.

Responsibilities:

• Liaise with appointed engineering firm and internal stakeholders
• Responsible for end-to-end project delivery, execution and documentation
• Participate in cross functional internal/external discussions for project execution
• Responsible for timely delivery and completion of project milestones and updates
• Ensure project completion within allocated budget expenditure

About You:

• Minimum 4 years of experience in the pharmaceutical industry
• Clean Utilities experience is preferred

Duration : 12 months. Option to extend/convert subject to performance review.