Roles & Responsibilities:

To assist in ensuring the smooth operation of site activities

To provide logistical support (site utilisation) when needed, as requested by sub-contractors

To be the liaison for the coordination of different trades within the same discipline

Responsible for all on-site engineering issues pertaining to site matters

To assist in coordinating with sub-contractors and attend to clients' queries to ensure timely work arrangements

To be involved in the day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule and the local authorities’ quality standard

To assist in managing project documentation and maintain accurate records

Ensure compliance with all health and safety regulations

Requirements:

Degree/Diploma in Design/Structural/Architectural/Civil Engineering/Building Construction or any equivalent qualification

Experience or knowledge in Bridge Construction/Crosshead/Lifting Frame/Launching Gantry Operation/Pre-cast Segment Method/MRT/LTA will be an advantage

More than 3 years of site experience in the Construction sector, preferably in superstructure crosshead/precast segmental bridge and Launching Gantry operation or similar

Good team player and able to work independently

BCSS certificate

Please include your current and expected Salary in your resume.

· Provide technical supports before & after sales

· Sourcing, compiling of costing, preparation of proposals

· Reviewing of sales inquiries, tender specifications, drawings etc.

· Corresponding with supplier and customers

· Prepare/submit quotations/proposals after reviewed & approved

· Handle ordering processing

· Reviewing of purchase orders against drawings, specifications, BOM and/or RFQs

· Diploma in Mechanical/Electrical/Mechatronics with experience preferred

· Higher Nitec/Nitec in Engineering with experience are welcome

· Outspoken personality, able to work independently as well as a team player in pressurized environment

· Transport provided in Boon Lay

· Training will be provided

· Work in customer’s site if requires

· Entry level candidates are welcome

· Both genders may apply

· Estimate Monthly Salary : SGD2,500.00 to SGD3,200.00

JOB DESCRIPTION

• Plan and co-ordinate on the project progress and schedule and ensure timely completion
• Attend project meeting and prepare report for project progress update
• Prepare project budget and cost estimation
• Coordinate and plan to achieve project milestones, project deliverables and schedule monitoring
• Manage, control and monitor all project activities such as engineering design, site execution, testing and commissioning of project
• Prepare / review as built iso for claim purpose, follow up with client for any outstanding DO issue
• To prepare progress claim report and submit progress claim documents according to client requirement
• To prepare operations and maintenance manual after project completion
• To coordinate with inter-departments for operations matters (procurement, engineering, group office)

Competency Requirements

• Diploma or Degree in Mechanical Engineering
• At least 3 years of working experience in the related field
• Familiarity with semi-conductor/construction industry
• Proficient in Microsoft Office
• Knowledge of QA/QC procedure (PQR/WPS) will be an added advantage
• Multi-tasking team player with excellent interpersonal and communications skills
• Attended QEHS related awareness training

Job Responsbilities

• Prepare of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Perform technical proposal c/w PFD, P &ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new product technical evaluation

Job Qualifications

• Degree in Chemical/Mechanical/ Electrical Engineering
• Technical knowledge (i.e. Process Design and calculation) in membrane (MF/UF/RO/MBR), Ion Exchange (2B3T, MB, CPU, EDI) and pretreatment processes (coagulation/ flocculation, sedimentation, clarification, filtration)
• Relevant project management / plant testing & comissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details

Job Description

We are seeking a dedicated Support Engineer professional to join our team to ensure the smooth operation of our systems and applications. The ideal candidate will have strong technical skills and be able to collaborate with various departments to support and maintain our software systems.

Responsibilities:

Monitor and troubleshoot production issues (Linux VMs, Vendor Product, SFTP).

Collaborate with cross-functional teams to identify and resolve production issues.

Perform root cause analysis and provide solutions to prevent future issues.

Create and maintain documentation related to production issues and resolutions via JIRA.

Implement and maintain processes and procedures to improve production support.

Provide daily, weekly, and monthly reports on system performance and issue status.

Ensure proper deployment and release of software updates & infrastructure patches/upgrades.

Participate in on-call rotation and respond to production issues after business hours. There are two shifts, Morning (7 AM to 4 PM) and Afternoon (2 PM to 11 PM), running 7 days a week.

Deployments during silent hours.

Development work within the vendor product (about 10%-20% of time).

Preferred Qualifications:

Bachelor’s degree in Computer Science or related field.

2–4 years of experience in Production Support or related role.

Strong technical skills in Java, SQL, UNIX, and scripting languages.

Ability to troubleshoot and resolve complex production issues efficiently.

Excellent problem-solving and analytical skills.

Effective communication skills to collaborate with cross-functional teams effectively.

Willingness to participate in on-call rotation.

Responsibilities:

• Support the Project Director (PD) in project functions, including project management, site management, and risk control to achieve project goals.
• Lead and mentor the project team by setting guidelines, providing advice, and supervising as needed.
• Oversee all project management activities from planning and coordination to completion within budget, schedule, and quality standards.
• Assist PD in compiling project progress reports (e.g., Monthly Report, VO Management, EOT Assessment, Project Progress Updates).
• Monitor the project schedule and manage daily operations, setting short- and long-term goals, coordinating with other contractors.
• Conduct technical reviews to ensure contract compliance and adherence to completion timelines.
• Liaise with clients, consultants, and contractors, attending regular meetings to ensure project progress.
• Supervise site labor and subcontractors, resolving construction issues as they arise.
• Oversee quality control, safety, and EHS practices on-site, identifying high-risk activities before construction and approving Method Statements.

Requirements:

• Degree in Civil Engineering or equivalent, recognized by the Singapore Professional Engineers Board (PEB).
• At least 10 years of experience in the construction industry.
• Experience in LTA, roadworks, MRT, and viaduct projects.

_____________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities:

* Project Engineering, Project Planning and Project Coordination for BMS / Environmental / Water Quality System

* Develop detail proposal, specification, project plan and scheduling

* Prepare coordinating, and monitoring the assigned engineering projects

* Attend Project / site site meetings and inspections

* Provide technical support and guidance to the project team members

* Supervise daily activities such as quality, safety and project delivery carried out on site.

* Work closely with the contractors and the authorities for access, task and troubleshoot site issues.

* Manage project and monitor project progress to ensure smooth completion.

* Provide project status update to management accurately and in a timely manner.

* Attend maintenance issues during warranty period.

* Ensure safe work procedures and environmental control measures are implemented at work site.

* Handle project risk management and issues escalation.

* Prepare and manage project costing, proposal and quotations. Sourcing for material and parts

Requirement:

1. Diploma in Mechatronic / Mechanical / Electrical / Environmental.

2. Min. 2 years experience in project engineering and management

3. Possess positive attitude to learn, has initiative and independent

Interested candidates are to forward your detailed resume stating current & expected salary to [email protected].

We regret that only shortlisted candidates will be notified.

Job Descriptions:

* Development & Implementation of IoT Application, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Implementation of IoT, Robotics, Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in IoT implementation

* Knowledge of Building Automation & Process Control

* Experience in IoT, BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in embeded programming, Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

* Willing to travel to overseas on short notice and work after office hour, weekend and public holiday.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Description

• Manage the company’s projects
• Coordinate between client, company, factory and work site staff
• Work on ensuring good quality and maintain delivery schedules
• Liaise with QA/QC for the third party/client inspections, class survey certification, etc

Requirements

• Degree in structural / marine / naval architecture / civil / mechanical engineering
• Min 4 years of working experience in similar industry
• Good written and spoken English
• Experience in quality assurance and project management, preferably in the construction, marine, or offshore industry
• Leadership qualities expected
• Able to plan and manage project independently
• Come and convince us why you are the best person for the job

• Manage & develop new customers based for spare part sales in the industrial, Marine & Offshore/Oil Gas market.
• Responsible for maintaining a high standard level of customer services and good customer relation.
• Responsible for maximizing a high level of profit margin and ensure meeting the pre-set sales target.
• Executing sales & marketing strategies to maximize opportunities in both domestic and international markets.
• Make sales presentation and provide technical support to customer
• Gather information on market demand, competition and latest technologies.
• Submission of weekly, monthly and quarterly reports.

Roles and Responsibilities:

• Responsible for preparation and delivery of process calculations, design drawings and other documents for water, wastewater treatment, and air treatment projects.
• Aware the requirements for full compliance to local authorities
• Conduct process calculations such as treatment unit sizing, pipe or ducting pressure losses for above mentioned projects.
• Design PFD, P&ID drawings for these projects.
• Select equipment or propose the parameters for selection of equipment such as pumps, fans.
• Design the layout and section views of the overall treatment system including process treatment units, equipment, and pipings and ductings with the help of drafters.
• Prepare other textual documents in process discipline such as control philosophy, datasheets.
• Evaluate technical documents from subcontractors and suppliers.
• Coordinate the works with mechanical engineers, and electrical, control and instrument engineers.
• Provide technical support to sales and project teams.
• Develop or provide design recommendations, value engineering and training to clients or co-workers
• Liaising with other departments (Project, QAQC or Commissioning) on schedule and deliverables timeline.
• Report to engineering manager.

Requirements:

• A recognized degree in environmental engineering, chemical engineering, mechanical engineering, or all other process related engineering.
• 3 years above work experience in water, wastewater treatment, or air treatment.
• Master degree holders with less experience will be considered.
• Proficiency in CAD, MS office or other design softwares.  Strong analytical and problem solving, critical thinking skills.
• Experiences in ultrapure water treatment, air treatment scrubbers, and thermal oxidizers are preferred.
• Good writing and communication skills.

ACMV Design/Site Engineer - Job Description

1. System Design: Create and optimise air-conditioning and mechanical ventilation systems, including load calculations and equipment selection.

2. Site Supervision: Oversee the installation, testing, and commissioning of ACMV systems on-site to ensure they meet design specifications and quality standards.

3. Technical Support: Provide on-site troubleshooting and technical guidance during construction, resolving any issues related to HVAC systems.

4. Regulatory Compliance: Ensure all designs and installations adhere to local and international codes and standards (e.g., ASHRAE,Green Mark).

5. Project Coordination: Collaborate with architects, contractors, and other stakeholders to ensure seamless integration of ACMV systems into the overall building design.

6. Client Communication: Interface with clients to address their needs, provide updates, and ensure satisfaction throughout the project lifecycle.

7. Minimum Requirements: Bachelor's degree in Mechanical Engineering, 3-5 years of experience in HVAC design and site supervision, proficiency in design and project management tools, and strong problem-solving skills.

ACMV Engineer Minimum Requirements

1. Education: Bachelor’s degree in Mechanical Engineering or related field; a diploma with extensive experience may be considered.

2. Professional Accreditation: Registration with the Professional Engineers Board (PEB) Singapore; Green Mark Accredited Professional (GMAP) is advantageous.

3. Experience: 3-5 years of relevant experience in HVAC or ACMV design, preferably within Singapore.

4. Technical Skills: Proficiency in HVAC design software (e.g., AutoCAD, Revit MEP); strong understanding of Singapore's SS 553, SS 530, and SS 531 standards.

5. Regulatory Compliance: Knowledge of local building codes, fire safety regulations, and BCA standards, including Green Mark Certification requirements.

6. Soft Skills: Strong communication, problem-solving, and project management abilities.

7. Continuing Education: Commitment to Continuous Professional Development (CPD) as required by professional bodies like IES or PEB

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

We are seeking an Electric System Design Engineer to design hydraulic and electric systems for Ro-Ro equipment. As a key team member, you will be responsible for developing high-performance systems that meet safety, regulatory, and operational requirements in Marine Industry. Fresh graduates from Electrical, Mechatronics, or Mechanical Engineering backgrounds are encouraged to apply, as we provide training and development opportunities to enhance your skills.

Qualifications:

• Bachelor’s degree or higher in Electrical, Mechatronics or Mechanical Engineering.
• Strong problem-solving skills and active communication skills.
• Excellent interpersonal and collaboration skills.
• Experience in the design of hydraulic and electric system add value.
• Experience in both of Shipbuilding and Marine industry will be a significant plus.

Job Description:-

1. Responsible for all aspects of drafting electrical and structural drawing of switchboard & control panels for marine and industrial use, incorporating the company's key circuit breaker products.

2. Based on abundant practical experience and extensive knowledge on circuit breakers, produce high class switchboard and control panels drawing according to company’s standard.

3. Manage and lead the project for timely and accurate production of software engineering, electrical drawing and structural drawing.

4. Based on software management skill and rich experience of programming language and software development tools, construct software for control system.

5. By communicating closely with the clients both in Singapore and Japan, responsible for accurately understanding their needs and make sure that the products delivered are perfectly designed to meet their demand.

6. During the periodic inspection of products after delivery, responsible for supervising the on-site inspection to ensure that it is carried out correctly.

7. Take the lead of investigation to solve the issue rapidly in case of any software or system issues, by closely liaising with HQ in Japan.

8. Based on the extensive knowledge of switchboard, circuit breakers and software for railway, marine, cogeneration system, power plant and biomass plant projects, liaise closely with engineers’ team in Japan HQ and clients in Singapore to ensure solutions.

Job Requirement:-

1. More than ten (10) years of experience as software and electrical design engineer in electric power system industry.

2. More than ten (10) years of experience in drawing electrical circuit and outline drawing of switchboard using AUTOCAD.

3. More than five (5) years of experience in using software programming tools for power management system in industrial cogeneration system, specifically with PLC (Omron, Fuji, Mitsubishi, Schneider product etc.).

4. More than five (5) years of experience in communicating with clients as software and/or electrical design engineer, explaining technical details to clients in an easy-to-understand manner.

5. Understand “TERASAKI” products that include circuit breaker, marine and industrial switchboard.

6. Certified as a power generation equipment specialist or equivalent and more than five (5) years of practical experience in power generation of switchboard & control products.

Skills Required:-

・Problem-solving skills in challenging and complex situations

・Project management skills from concept, prototype to implementation

・Excellent communication skill to explain technical matters to clients

・Conversant with Autocad, Software for PLC (Omron, Fuji, Mitsubishi, Schneider product).

・Certificate of 1st grade Electrical drafting specialist or equivalent

・Certificate of power generation equipment specialist

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:

• Attends and records the daily quality assurance related inspections for mechanical and HVAC installations
• Coordinates with other production departments, clients, and surveyors for Inspection & testing requirements
• Assigns the systems to be tested to the various supervisors and technicians involved in the operation
• Ensures that the Quality work processes to enhance efficiency and productivity
• Reports on non-conformance and issue Improvement notes, where necessary
• Ensures timely completion of project
• Ensures that all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements
• Any other assigned duties and responsibilities

Requirements:

• Degree in Marine and Offshore / Mechanical Engineering
• Minimum 5-10 years’ experience with 3 years in marine construction and installations
• Must have ASME PCC-1
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Overall Job Purpose

Responsible for configuring, implementing, and maintaining Project AVEVA Net/AIM and ISM instances. The incumbent will play a pivotal role in Project data capture, verification, and handover.

Core Responsibilities

• Be the Single Point of Contact for all matters related to setting up, maintaining, administering, upgrading, and troubleshooting the AVEVA NET system deployed on all MODEC

• Coordinate with the engineering disciplines assigned to the project and work closely with project management, procurement, HSE, QA/QC, operations, and the construction team. Meet or, where possible, exceed on-time deliverables while maintaining quality and safety in each activity.

• Establish and maintain the creation of a Class Library and define its structure and mapping techniques in ISM.

• Develop efficient data capture, validation, loading and handover work processes to meet Client/Project schedule requirements.

• Establish new project portals that effectively reflect client/project class libraries, data structure, and handover requirements.

• Ongoing Gateway configuration, maintenance, and development of AVEVA NET portals.

• Generation of Query Forms, SSRS and BI reports communicating data discrepancies, omissions, completion trending and status

• Raise the profile of information management and create a data-centric culture via effective portal development and deployment.

• Shall be capable of developing work instructions for users of AVEVA NET.

• Must understand company goals and implement management directives and policies.

• Anticipate potential problems and take preventive actions.

• Support the Product Manager in planning and delivering AVEVA NET solutions on projects.

• Shall train the MODEC users on the AVEVA NET application in projects.

• Interface with all disciplines to clarify/explain AVEVA NET intent and suggest alternatives when

• Contribute to continuous improvement of company work methodology/procedures.

• Conclude all open issues amicably.

Educational Qualification:

Certification(s):

• Training in AVEVA NET administration

Relevant Experience:

a) 5-10 years’ experience applying AVEVA NET in onshore/offshore Oil & Gas areas or FPSO line(s).

b) AVEVA NET/AIM and AVEVA ISM administration and implementation.

c) Be fully proficient in exception handling between the AVEVA system with associated Gateways and the Client system

d) Have extensive knowledge of AVEVA registers gateway interface with Client system

e) Experience in mapping Company data and document structures to Client structures. Have an in-depth understanding of FEED & Detailed Design deliverables, their execution methodology and their interdependencies with one another.

f) Have previous experience in engineering information management.

g) Possess previous experience with AVEVA Net Portal and ISM development and administration skills on Oil & Gas Projects, specifically for Major Capital Projects.

h) Knowledge of Engineering Design software like AVEVA E3D and AVEVA Engineering is a plus.

i) Possesses good working knowledge of the Oil & Gas Industry, including EPCs and owner-operators (preferred but not mandatory).

j) Shows evidence of good organizational skills.

k) Demonstrates ability to take the lead.

l) Good communication skills.

m) Commitment to take responsibility.

JOB DESCRIPTION

· Embedded system software development

· IoT related protocol and software development

· Peripheral device driver and Wi-Fi related software development

· Customer issues support

JOB REQUIREMENTS

· Bachelor’s degree or above in Computer Engineering, Electronics or Networking engineering

· Familiar with C/C++

· Familiar with embedded system and experience in driver-related development is an advantage

· Peripheral and Wi-Fi-related experience is an advantage

· Good communication and team working skills

Basic information:

• Location: Toh Guan Road
• Monday – Friday, 8.30am – 5.30pm
• Stand-by duty is required

Job Scope:

• Oversee, manage, and coordinate project activities alongside a team of Engineers and Technicians to ensure successful project completion.
• Track and manage project progress to meet timelines, stay within budget, and maintain quality standards.
• Collaborate closely with consultants and clients to ensure project requirements are met.
• Conduct system programming and troubleshooting during the project implementation phase.

Job Requirement:

• Diploma/Higher Nitec in Electrical and/or Electronics or any Engineering related courses
• 1-2 years’ experience in site supervision and coordination with main contractors and subcontractors
• Possess a class 3 driving license

For interested candidates, please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484

JOB DESCRIPTION:

• UAT testing of existing products and driver/firmware
• Perform functional test, regression test, performance test, sanity test and other tests
• Liase with internal teams (e.g. project lead/developer/team members) to on bugs and product quality
• Co-work with R&D team to reproduce customer issues and verify fixes
• Track and isolate problems, verify resolutions, and qualify bug fixes

JOB REQUIREMENTS:

• Any engineering diploma holder or any engineering bachelor's degree holder who are interested in the testing field
• Good problem solver, ability to troubleshoot and think out of box
• Inquisitive mind, paying attention to small details and good observer
• Strong attention to detail, able to identify discrepancies during the test process
• Analytical mind to correctly judge product behaviour
• Excellent time-management skills and commitment to meet deadlines
• Good communication skills and a team player

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

We are seeking a dynamic Software Engineer (Python) to join our growing global team, Recommendations domain to work on exciting projects like implementation of our own machine learning framework, integrating a feature store for supporting real-time data science requirements and the creation of complex data ingestion pipelines to support this!

Join us in creating an engaging and personalized shopping experience for our users. Every feature and improvement you develop will enhance customer choice and app performance, making it easier for users to find and enjoy the products they love. Your work will have a lasting impact on customer satisfaction and loyalty across diverse markets.

Responsibilities

• Working closely with Data Scientists and Product Managers to run experiments on new recommendation features.
• Deploying low latency databases and datastores to support operational requirements of the recommender models.
• Working with senior engineers to maintain our API Gateway.
• Deploying and maintaining ML models on our deployment framework that power recommendations on all pages of the application.
• Enabling and actively managing observability tools on all touch points within our systems.