Primary Responsibilities:

• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 3 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

MAIN RESPONSIBILITIES:

The Field Service Engineer is responsible for providing technical field assistance in maintenance, operation, equipment installation and startup and/or shutdowns for all CPM processes. The Field Service Technician must have strong business and communications skills to establish and maintain strong relationships with the customer. Analytical and problem-solving skills are just as essential to this position.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Provide technical field assistance, in maintenance, installation, operation, and startup for CPM equipment; prepare customer field report after each trip.

· Perform inspections of existing CPM equipment during plant shutdowns, assist plant/contractors with recommended repairs/parts and provide each customer with a field report.

· Evaluate fabricated product when asked; prepare non-conformance report when necessary and work with internal and external customers to resolve issues.

· Provide technical training to relevant customer and responsible for tracking customer claim.

· Work integrally with internal employees and external customers to promote the CPM Aftermarket service, to meet group initiatives and objectives.

· Assist contractors in the erection of CPM equipment at customer site.

· Identify customer's needs and sales opportunities to help future growth.

· Participate in company meetings in order to increase communication, understanding, and teamwork.

· Cross train with engineers/technicians to learn technical processing information.

· Observe all customer and OSHA safety rules.

· Perform other related duties as required and assigned.

QUALIFICATION AND SKILLS:

· Associate degree or equivalent from a two-year college or technical school, preferably in Engineering.

· A minimum of 2 years of experience in animal feed or biomass related manufacturing industry.

· Good written and verbal communication skills.

· Establish and maintain effective working relationships with co-workers, customers, and vendors.

· High integrity and ethics.

· Working knowledge in AutoCAD.

· Required knowledge of Microsoft Office.

· Be able to communicate in English fluently and at least one local language.

· Ability to travel on need basis – domestically or internationally and up to 50% of the time.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Engineer

Internal Code: A24013

What will you do?

• We develop the Smart Nation infrastructure and applications and facilitate collaboration with citizens and businesses to co-develop technologies.
• Join us as we support Singapore's vision of building a Smart Nation - a nation of possibilities empowered through info-communications technology and related engineering.
• Our objective is to catapult our government infrastructure into the new digital era with faster time to market, operational agility, automated deployment and scalability.
• We are an agile development and operations house that is bold, agile and collaborative.
• The team is responsible for designing, prototyping, building and operating different products and services.
• As a Software Engineer (frontend), you will help to level up the team's competency with your valuable past experiences.
• Experiences of failure are just as important as those of success.
• You will drive, implement, deploy, maintain and operate products or key components of your products. You will work closely with different teams to deliver the best possible and impactful solutions.
• If you are looking for opportunities to collaborate with leading industry experts and be surrounded by highly motivated and talented peers, we welcome you to join our team. Make a difference by taking up the key role and be part of the passionate and inspirational team.
• Ownership over feature design and implementation, with a focus on sound technical choices and maintainability. At times, this would be in collaboration with other software engineers.

What are we looking for?

• From 3 - 5 years of relevant experience
• Proficient in JavaScript, TypeScript
• Experience in frontend technologies (HTML & CSS etc) as well as any web framework (React Preferred), understand their design principles and application scenarios; and have good practise and understanding of common web compilation and bundling frameworks, including Webpack/Rollup/Babel/AST.
• Familiar with various front-end related debugging and testing tools, and have independent problem-solving skills
• Contribute in technical discussions and solutioning sessions.
• Possess good coding and documentation habits, pay attention to code style, familiar with basic design patterns and principles, and continuously focus and optimize projects
• Autonomy to drive the direction of the product
• Chance to work on creating developer tooling systems from the ground up, from research all the way to implementation.
• Chance to work with different development teams while enabling them to be more productive at the same time
• Excellent teamwork and communication skills; communicating technically complex ideas to non-technical people effectively is a plus
• Having a growth mindset and willing to share knowledge to grow together with the team
• Enjoy making data driven decisions
• Understand that problems can be solved in different ways, sometimes not with engineering; understand how these solutions can and should be evaluated.
• Willing to learn and own fullstack

If would be a plus if you have:

• Experience in fullstack or backend JavaScript (Node.js)/TypeScript or other backend frameworks
• Experience with automated testing
• Experience with deployments cloud infrastructure such as AWS, Azure, or Google Cloud
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is strongly preferred.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Engineer

Internal Code: A24121

What will you do?

• Build prototypes to demonstrate technology opportunities
• Design system architectures
• Write production quality code
• Manage deployments to cloud and (occasionally) on-premise infrastructure
• Learn and share knowledge in a multi-disciplinary team

What are we looking for?

• Experience with modern web applications in JavaScript (ES 5/6) is a must-have
• Experience in creation/maintenance of APIs using Node.js is highly advantageous
• Experience in front-end development with React.js is highly advantageous
• Experience in automated testing using JavaScript testing frameworks/libraries such as Karma, Mocha, Chai and Sinon is highly advantageous.
• Experience with database management/usage (both relational and non-relational), and handling of data in different environments is highly advantageous.
• Experience in feature testing using a Selenium-based framework is a nice bonus.
• Experience in tooling processes for modern web applications using Webpack and Gulp is a nice bonus.
• Experience in using Docker containers, development of CI/CD pipelines, and deployment using cloud services such as AWS/PasSes/your own private servers is a nice bonus.
• Experience in the software development lifecycle in an Agile context is a plus point.
• Experience in Scrum is a plus point.
• Passion for creating products
• Keen sense of learning and self discovery
• Willingness and capability to impart knowledge
• High level of self awareness
• Ability to self manage
• Growth mindset
• Minimum 2 years experience (or equivalent level of skill/confidence) with modern web applications using JavaScript.
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is strongly preferred.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

The Advanced Remanufacturing and Technology Centre (ARTC) is a public-private partnership consortium of more than 80 industry members. Our core mission is to develop and deploy advanced manufacturing solutions and upskill the workforce to drive local industry competitiveness.

Smart Virtual Systems (SVS) Group is seeking a highly motivated Senior or Lead Research Engineer to implement highly available and scalable microservices-based applications and platforms for autonomous manufacturing applications. He/she is expected to be independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges. We are seeking a talented and experienced Software Engineer with experience in MLOps/AI to join our dynamic team. In this role, you will play a key role in software development and focusing on deploying machine learning models, implementing MLOps best practices. You will closely work with our cross-functional research teams to streamline model deployment, improve scalability and reliability of systems.

The key roles and responsibilities include the following:

-Develop, test, and maintain enterprise system and applications, with a focus in ML/AI systems.

-Implement MLOps best practices to automate model training, deployment, and monitoring processes.

-Optimize and Implement machine learning algorithms and deep learning architectures.

-Collaborate with data scientists and software engineers to integrate machine learning solutions into existing systems and deliver high-quality software products.

-Optimize AI pipelines for scalability, reliability, and better performance.

-Conduct performance analysis and optimization to improve model efficiency and accuracy.

-Stay updated on the latest advancements in software engineering, AI/ML technologies and best practices.

Job Requirements

-Bachelor or Master's Degree in Computer Science/Engineering or relevant Disciplines

-Must have a minimum of 8 years of experience as a Software Developer/Engineer

-Hands-on experience in Cloud Native Technologies such as in micro-services, DevSecOps, and Containerization Technologies

-Proficiency in designing and developing microservices and software systems using C# .NET, Python and angular

-A good understanding of CI/CD Pipelines in a distributed environment using Git, Artifactory, Jenkins, SonarQube, Docker registry, etc.

-Hands-on experience with deploying and managing microservices using container orchestration platforms (on-prem/public cloud)

-Can do attitude and happy to interface with multiple stakeholders

-Excellent troubleshooting, follow-through, and problemsolving skills, with attention to detail

-Excellent verbal and written communication skills

-Familiarity with deep learning architectures and natural language processing (NLP) techniques.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Overview

We are seeking an experienced Plant Engineer to join our central kitchen manufacturing plant. With a highly energetic technical team, the Plant Engineer is a pivotal role in the central kitchen who will be responsible for overseeing the highly automated packaging operations, serviceability of all production equipment and constantly improving the automation systems within the plant. The successful candidate will have a strong foundation in engineering and experience in managing and maintaining a high-volume food manufacturing plant.

Responsibilities

· Conceptualize systems and equipment to build capabilities for mass production of a wide range of ready meals.

· Constantly improve current automated production system through mechanical, electronic, automation, digital control enhancements and configuration.

· Daily setup and run the production system to meet with time-sensitive order demand

· Maintain highest level of hygiene standard in the plant

· Develop and implement preventative maintenance programs

· Ensure compliance with all safety regulations and policies

· Collaborate closely with other central kitchen teams to ensure smooth end-to-end operation

· Prepare documentation, conduct training and submit reports

Requirements:

· Diploma/degree in Automation, Mechatronics, Electrical or Industrial Engineering or related field

· Min 3 years of hands-on experience in large scale food production environment

· Extensive knowledge of food manufacturing processes and equipment

· Ability to lead a team and run a production process independently with a tight schedule

· Strong capabilities in design, implementation and troubleshooting of automation systems

· Has own transport

Job Description

• Oversee in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc.
• Manage ACMV design coordination with other trades with BIM coordination.
• Liaise with ACMV suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for ACMV equipment and materials to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required.
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based ACMV experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in ACMV calculations including heat load, pump sizing, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more.
• Experience of design and coordination skill.
• Familiar to ACMV, Green Mark and fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage.

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

As a Sales Engineer / Senior Sales Engineer, you will join our dynamic sales force in developing new businesses and providing professional solutions to our potential clients. Identify new sales opportunities through prospecting.

Job Description:

• Originate and close opportunities to develop new market segments, product groups and channels.
• Identify and canvass new sales opportunities and market through prospecting.
• Develop and plan sales strategies to meet monthly sales targets and progressive KPIs.
• Respond efficiently to customers’ technical or commercial queries and consistently meets customers’ expectation.
• Work closely with General Manager to develop and implement sales and service strategies to achieve committed sales target.
• Work closely within Sales Department to manage and expand existing business and contribute to meet sales KPI.
• Travelling to be expected.

Requirements:

• Diploma or Degree in Engineering, preferably in Marine, Mechanical or Mechatronics field.
• Have a strong and successful sales experience for more than 5 years in marine industry.
• Positive working attitude and self-motivated.
• Preferred who are familiar with 2-Stroke & 4-Stroke Engines, Engine Components MRO.

Additional Information:

• 5 days’ work week
• Transport provided from Choa Chu Kang and Pioneer MRT and vice-versa.
• Variable bonus and better medical benefits.
• Career growth & learning opportunity.

The role will work as a member of the Global Cybersecurity organisation - Security Architecture team, which is focused on improving technology and architecture decision-making through collaboration with management, staff and customers on technology strategy, enterprise architecture, and investments in strategic security technology.

The individual, with a broad cybersecurity plus systems and network architecture knowledge and experience, will deliver security assessments while supporting our direction, lifecycle management and leadership for security architecture and technology. The individual will perform a key role in Security assessments while supporting various critical initiatives through the identification, analysis, evaluation, lifecycle management and adoption of security architectures and technologies. The Security Architect will work closely with other security functions and will provide guidance to ensure that there is coordination with their activities in technology choices. In addition, the Security Architect will be involved with education and mentorship, supporting the delivery framework, development of technical architecture and associated documentation, as well as advanced topics of research.

Essential Functions:

• Be a product security champion by driving Security Architecture and Design, implementation and optimization for Web, API and Mobile backend applications across Visa.

• Applying security design principles to develop security solutions architectures

• Engage in the initial requirements definition including analysis of threats and risks and alignment with Visa security, Engineering, IT and Architecture standards.

• Conduct and facilitate security reviews, threat modelling including deep design reviews throughout the development lifecycle.

• Facilitate 'table-top'/red-team/scenario analysis exercises in conjunction with other SMEs. Plan the resolution of any identified vulnerabilities/issues.

• You’ll be working on enabling/building security controls which protect the applications from attacks on various platforms and technologies, like:

  • Linux, Windows, VMWare, Openstack, SDN, Public cloud like AWS, Google

  • Cybersecurity tools like IDS, SIEM, Tripwire, Tanium, Netwitness, Netflow, WAF

  • HSMs, Tokenization systems, data encryption solutions from Safenet, Vormetric etc

  • Web technologies like HTTP, SOAP, REST services, AJAX

  • Databases like Oracle, MS SQL, Redis, Cassandra

  • Programming languages like Java, C, C++, .Net, Javascript, GoLang, ErLang, etc

  • Caching services like Hazelcast, Coherence, and messaging systems like Kafka, MQ

  • Web Access Management solutions like Forgerock, Siteminder, Custom/in-house Security Frameworks

• Help business and product team to achieve various compliance certifications like PCI, FFIEC  etc.

• Identify and analyse system and application level vulnerabilities to provide recommended counter measures or mitigating controls that reduce risk to an acceptable and manageable level.

• Driving security technologies evaluations, proof-of-concepts, and production pilots

• Building strong cross-organisational relationship through integration with the teams, in order to effectively influencing staff across the IT organisation and product groups

• Managing the lifecycle of security technologies

• Staying current with security technologies, as well as development techniques and methodologies in order to make recommendations for use based on business value

• Maintaining oversight of the design and implementation of IT systems to ensure appropriate and effective security controls are included.

• Contribute to the definition of overall IT architecture from a cybersecurity lens.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for experienced Senior Engineer – Mechanical / Environmental Sustainability to join our Building Services team in Singapore.

You will be joining our Centre of Excellence (CenEx) team, led by one of our Technical Director who was recently conferred the SGBC-BCA Professional Leadership in Sustainability Award.

Senior Engineer – Mechanical (ESD)

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• Leading mechanical services design and environmental sustainability design for building projects.
• Assume responsibility and undertake engineering tasks of increasing scope and complexity.
• Carry out site condition assessment, feasibility studies, energy audits and technical due diligence.
• Responsible for analysis of information, production of design, tenders, proposals and technical report writing.
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants.
• In charge of jobs control, planning, monitoring, progress and job cost reporting.
• Communicate effectively with the client, sub-consultants, contractors, and other parties relevant to the job.
• Assist in assessment and review of designs prepared by others on behalf of the clients.
• Liaise with authorities on plans submission and compliance.

Pre-Requisites

• Degree in a Mechanical Engineering recognised by Professional Engineers Board, Singapore.
• Minimum 5-7 years relevant working experience in the design & supervision of building service projects and Fire Protection.
• Experience in leading roles for design & design management of residential, commercial, institutional or hotel projects will be an advantage.
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures.
• Understanding of energy efficient mechanical systems and equipment with Green Building design experience and knowledge of Green Mark/ LEED is an added advantage.
• Competent user of relevant engineering software and simulation tools.
• Excellent written & spoken communication skills in English.
• Able to work independently & exercise initiative.
• Excellent delegation and communication skills, which sees you enlist the help of others to meet objectives
• A team, client and delivery focused working style
• Experience in a consulting environment

Job Highlights

• Career Advancement
• Medical & Telecommunication Allowance
• AWS & Variable Bonus

Why Beca?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

● Education background

● Work experiences

● Reason(s)for leaving

● Current and Expected salary

● Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Responsibilities:

• Support the Project Director (PD) in project functions, including project management, site management, and risk control to achieve project goals.
• Lead and mentor the project team by setting guidelines, providing advice, and supervising as needed.
• Oversee all project management activities from planning and coordination to completion within budget, schedule, and quality standards.
• Assist PD in compiling project progress reports (e.g., Monthly Report, VO Management, EOT Assessment, Project Progress Updates).
• Monitor the project schedule and manage daily operations, setting short- and long-term goals, coordinating with other contractors.
• Conduct technical reviews to ensure contract compliance and adherence to completion timelines.
• Liaise with clients, consultants, and contractors, attending regular meetings to ensure project progress.
• Supervise site labor and subcontractors, resolving construction issues as they arise.
• Oversee quality control, safety, and EHS practices on-site, identifying high-risk activities before construction and approving Method Statements.

Requirements:

• Degree in Civil Engineering or equivalent, recognized by the Singapore Professional Engineers Board (PEB).
• At least 10 years of experience in the construction industry.
• Experience in LTA, roadworks, MRT, and viaduct projects.

_____________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Duties & Responsibilities

• Prepare the equipment list
• Prepare the specification and data sheet as per codes / standards, project and client’s requirement, for pump, loading arm, lifting cranes, marine gangway, air compressor, nitrogen package, hot oil package, oily water system, vapor recovery system and etc equipment for Oil & Gas industries
• Prepare the specification and data sheet for cryogenic pump, BOG compressor, condenser, LPG heater, seawater strainer, flare and etc equipment for LPG industries
• Prepare the requisition and RFQ documents for vendor enquiry
• Prepare the technical clarification and technical bid evaluation of vendor proposal
• Review and check the drawings, designs specification, materials and equipment from vendor for conformity with project technical requirements
• To liaise effectively with vendor and inter-departments to resolve engineering technical issue
• To resolve and response to client comment.
• Prepare information drawing for interface design work whenever is necessary
• Prepare bill of material for cost estimation of bid project
• Provide engineering support for the equipment installation and commissioning activities at site
• Provide engineering support for maintenance works.
• To carry out any other duties as and when assigned by the immediate supervisor or principle engineer

Qualification & Experience Generally Required

• Bachelor Degree in Mechanical Engineering or its equivalent
• Min. 1 to 2 years engineering knowledge in mechanical disciplines in Oil & Gas and Petrochemical industries.
• Experienced in equipment engineering specifications and standards
• Familiar with industrial standards and local codes
• Strong communication skills and the ability to stay organised and multi-task
• Proficient in using MS Word, Excel, Autocad

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures.
• Witness and provide contractor resources to support FAT as required.
  Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

Job Info:

• Basic: $3000 - $4000 + Phone Allowance + OT + Performance Bonus
• Working Hour: Monday - Friday (9am - 6pm)
• Location: Tampines

Job Scope:

• Take the lead on AV initiatives and provide input for project procurement
• Offer expert advice on project plans and layouts
• Assist in the procurement of AV hardware and software, ensuring project needs are met
• Plan, maintain, and monitor project timelines, intervening when necessary, and managing equipment storage and transportation
• Perform rack and stack, onsite installation, upgrades, troubleshooting, and repair of AV equipment, networking, and other in-house projects at customer premises
• Complete electrical wiring, trunking, programming, and basic construction setups (may require the use of a ladder)
• Manage, test, and commission CCTV, door access, ELV equipment, Bluetooth devices, and other necessary devices
• Ensure timely completion of testing, configuration, staging, and upgrades for assigned projects
• Liaise with clients to understand their requirements
• Conduct quality control analysis prior to events
• Diagnose and resolve technical issues, both hardware and software, as needed
• Respond to service calls related to equipment breakdowns
• Provide on-site support and user training at end-users' premises.
• Ensure production and updating of documentation such as user guides, etc
• Follow up with the finance department regarding costing and billing

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Qualification:

-Degree in Electrical.

- 3-5 yrs experience at Electrical Equipment.

Job Description:

Improved JD:

• Oversee the maintenance, monitoring, and uptime of EV charging stations to ensure seamless customer experiences. Lead a service team.

• Manage the lifecycle of technology assets, including chargers, software platforms, and network security, ensuring system reliability and scalability.

• Establish and implement SOPs for troubleshooting and preventive maintenance, optimizing network performance.

• Implement data analytics solutions to monitor and analyze charging station performance, driving continuous improvements in operational efficiency.

- Collaborate with key vendors, suppliers, and partners to secure and manage essential hardware, software, and support services. Oversee the design, testing, and implementation of new chargers, including setting up Router, LAN or SIM. Set up API.

- ⁠Ensure that all technology solutions comply with local regulations and industry standards for safety, environmental impact, and cybersecurity.

• Oversee the implementation of cybersecurity protocols to protect customer data and infrastructure from potential threats.

- Work closely with the customer support team to address technical issues and improve customer satisfaction.

• Evaluate and manage relationships with Factory & technology providers, ensuring cost efficiency and quality.

Purpose Statement:

• Ensures reliability and mechanical integrity of equipment for processes, utilities, facilities and controls with an objective to constantly improve site production and cost performance.
• Develops engineering solutions for repetitive failures and all other problems that adversely affect plant operations including capacity, quality, cost or regulatory compliance issues.
• Promotes, supports, co-ordinates and facilitates multi-disciplinary, multi-level teamwork (reliability) improvement activities, both reactive and proactive, and assist in implementation and follow-up of action items

Major Responsibilities:

• Ensures reliability and maintainability of equipment, processes, utilities, facilities and controls with an objective to constantly improve site production and cost performance
• Lead and drive mechanical integrity program in compliance with regulations
• Take a lead to troubleshoot equipment reliability issues and carryout RCFA for the repeated failures and failures that has an impact to production, quality and safety.
• Lead RCM studies for critical assets/systems and implement the action items generated.
• Run online/offline condition monitoring program site wide.
• Promotes, supports, co-ordinates and facilitates multi-disciplinary, multi-level teamwork (reliability) improvement activities, both reactive and proactive, and assist in implementation and follow-up of action items.
• Works with project engineering teams to ensure reliability/ maintainability of new/modified installations.
• Perform analysis of asset performance including: Asset utilization, Overall equipment effectiveness, remaining useful life and capital replacement plans as well as other parameters that define Site MEP KPIs such as availability, maintenance performance, reliability and R&M costs of assets.
• Develop SOPs, equipment job aids, checklist to assure no equipment reliability issue after repair work.
• Evaluate content of maintenance plans in CMMS including methods, maintenance frequencies and spare parts needed

Qualifications:

Education

• A bachelor’s degree or a diploma in Mechanical engineering discipline.

Experience

• Mechanical engineering degree with at least 5 years work experience or a diploma with a minimum of 15 years of relevant work experience in pharmaceutical/ biological/ chemical/ oil & gas industries.
• Experience driving RCM studies and RCFA
• Experience/Knowledge in Asset Integrity Management
• Sound technical knowledge coupled with hands-on experience in maintenance of processing equipment

Skills

• Comfortable working in a team and matrix environments with high degree of initiative and self-motivation
• Scientific approach to solving problems and makes data-based decisions.
• Keen in driving and adopting new technologies.
• Knowledge of CMMS, Reliability, and proficiency in MS Office products (Excel, Outlook, PowerPoint, Word, Project)
• Knowledge on vibration analysis, RCM and RBI
• API 510/570/580 certification will be an added advantage
• Good written and oral communication skills
• Interpersonal skills and a "hands-on" attitude
• cGMP experience is a plus

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

Position Overview: Customer Success Engineer provides technical support and ensures the success of our client's post-implementation. He/she is to be highly knowledgeable and skilled in all aspects of Tunity’s product architecture, showcasing individual expertise in software and adept knowledge of its integration with hardware. Acting as the technical contact point for our clients, he/she ensures a seamless and cohesive experience of service support for our clients.

Key Responsibilities:

• Product Expertise: Develop a deep understanding of Tunity's products, from software to hardware, to provide comprehensive support across our product and solution suite.

• Software Support: Provide expert software support, resolving issues swiftly at the root cause to maintain high levels of client satisfaction.

• Maintenance Management: Implement and manage software maintenance processes, actively monitoring and analysing activities to identify improvement areas, and managing preventative maintenance schedules.

• Solution Maintenance: Oversee the ongoing maintenance of software and platform solutions, ensuring they are current, optimized, and operating effectively within the client's infrastructure.

• Hardware Liaison: Collaborate closely with the hardware team, addressing hardware-related concerns, and providing timely resolutions to clients.

• Client Communication: Work in tandem with Customer Success Specialists in client engagements and communications, such as guiding clients on resolution processes, conducting training, participating in and contributing to client meetings, etc.

• Documentation and Analysis: Create and maintain technical documentation, conduct regular system performance and cost analysis, and prepare reports that inform strategic decisions.

• Technical Assessments and Implementation: Lead in-depth technical reviews and strategically recommend solutions to address client change requests, ensuring optimal outcomes and seamless integration of modifications. Implement and perform coding of the approved solution.

Qualifications:

· Tertiary qualification in Computer Science, Information System, Computer Engineering or a related field.

· At least 3 years of professional experience as a developer

· Proficiency in back-end development using Entity Framework, C#, .NET Core, .NET Framework, MS SQL, and RESTful Web API.

· Proficiency in front-end development using Angular 2+.

· Solid understanding of databases, both SQL and NoSQL.

· Experience with version control systems (e.g., Git).

· Knowledge of containerization and orchestration technologies (e.g., Docker, Kubernetes) is a plus.

· Knowledge of Single sign-on (SSO) (e.g Microsoft Entra ID, AWS IAM) via SAML/OAuth is a plus.

· Familiarity with cloud platforms (e.g., AWS, Azure, GCP) is a plus.

· Experience in Inventory Management System, Warehouse Management System and SAP is a plus.

· Excellent problem-solving and communication skills.

· Ability to work effectively in a collaborative team environment.

We are looking for candidates who possess a robust understanding of RACF, rather than those primarily knowledgeable in MF application development. Our ideal candidate should demonstrate deep expertise in RACF and its related functionalities.

Responsibilities:

Manage and drive z/OS Unix (Mainframe Access Management operations and audits).

Lead the completion of z/OS initiatives such as MFA and straight through processing for IDM processing requests.

Automate manual processes through scripting or via zSecure.

Possess strong knowledge of designing and reviewing RACF access groupings.

Bachelor’s degree in IT or equivalent. A major in IT security or related areas would be an added advantage.

Experienced in managing Mainframe security projects, operations and implementation

Minimum of 5 years of experience in Mainframe Security (RACF) administration/operations provided by z/OS UNIX system services (USS), CICS, DB2, and WebSphere MQ with hands-on regulatory compliance knowledge.

Solid experience in mainframe security, RACF access controls, IBM zSecure, MFA

Good to have strong experience with using zSecure Admin and zSecure Audit modules.

Good working knowledge of Access Management lifecycle and processes.

Experience in banking or financial services institutions preferred

Manages and monitors all installed systems and infrastructure for the organization to be in line with company guidelines or SOP (standard operating procedure).

Assists in the coordination of various teams testing and evaluating for the development of design and its implementation of the best output.

Installs, configures, and tests operating systems, application software, and system management tools.

Ensures the highest level of systems and infrastructure availability.

Evaluates the existing systems and provides the technical direction.

Plans and implements system automation as required for better efficiency.

Deals with work process, optimization methods, and risk management tools in the given projects for the successful accomplishments according to the requirements of the stakeholders.

Computer science degree

Scripting and programming proficiency

OS and Network experience

Certification may be helpful

Operating systems Linux, IBM AIX & Solaris

Configuration Management Tools: Ansible and Puppet

Monitoring tools: ELK, Prometheus, Grafana

APM Tools:  Dynatrace & AppDynamics

Cloud Platforms: AWS, Microsoft Skytap, Azure and GCP

Scripting Languages:   SHELL BASH

IaaC Tools: Terraform, Dockerfile

Containerization:  Docker, PCF & Kubernetes.

UNIX System Administration (RHEL, AIX & Solaris), Problem Determination and solving, and experience on GPFS, PowerHA System Mirror, and VIO.

Experience in Observability and Monitoring including APM tools

The PTO Lead Process Engineer leads new product introductions and the transfer of drug products to other facilities of moderate/high complexity independently and is a coach for his/her colleagues on the commercialization and manufacture of all drug products. He/ she typically will assume the responsibilities of a technical product steward and leads/supports all technical/ process activities (for example) investigations, validation and qualification processes, risk assessments and process safety management activities under his/ her responsibilities. The PTO Lead Process Engineer also leads/supports continuous process improvement activities to enhance site performance metrics and provides advanced/expert knowledge to the site and across our global technical network (while leveraging on other site experiences / knowledge) and continuously expands on personal expertise. He/ she will also provide technical supply support independently. The PTO Lead Process Engineer is expected to possess advanced/expert knowledge of at least one process/platform technology and supports the objectives of his/her seniors and the direct supervisor.

WHAT YOU WILL DO

MAIN RESPONSBILITIES

• Leads new product introductions to the site by conducting process and equipment comparisons, new raw materials introduction, development studies, clinical supplies manufacturing, cleaning processes development/ validation and training of technicians as required. Identifies and implements strategies for PPQ matrixing, novel technologies and new products etc. Authors PPQ protocols, reports and other associated documentation related to a new product introduction. Expected to have an advanced knowledge of product development, scale-up and technical transfer, key supporting documentation and associated regulatory requirements. Anticipates and remediates quality issues and challenges from the technology transfer process. Demonstrates advanced knowledge in technical writing for investigations, change request, PPQ reports and CMC sections.
• Leads and/or supports the design and execution of small/ full scale experiments using appropriate methodology and/or simulations for products/ processes to evaluate the impact of proposed changes to validated equipment/ processes.
• Proactively identify solutions independently to address issues that arose during experiment/ evaluation
• Leads/ provides technical guidance in support of site and divisional capital projects and new facility start-up activities. Ensures that the process design is well thought-out and robust for routine manufacturing. Provide technical input independently to the process design to ensure its fit for purpose for routine manufacturing. Responsible to transfer the knowledge of the project and facility to IPT colleagues.
• Provides technical expertise related to the product, equipment and manufacturing/cleaning processes in response to deviations/ product complaints/ adverse events to identify point of occurrence, root cause and corrective/ preventative actions. Demonstrates ability to lead and resolve complex technical issues and investigations and resolve with minimal supervision.
• Provides technical expertise for compliance activities such as audit and regulatory support. Acts as primary regulatory representative with business partners and regulatory agencies for moderately complex products/ programs/ issues.
• Manages product portfolio activities and is expected to manage a project team for activities associated with the product portfolio. Examples (but not limited to) include managing documentation updates (e.g. SOPs, batchsheets, recipes), quality risk assessments, change control management/ filing support (if applicable) and validation activities such as equipment qualification, simple process validation and cleaning validation/monitoring activities. Expected to have an advanced knowledge of respective compliance topics related to the above-mentioned activities. Demonstrates good project management skills (e.g. define core team and activities, project scheduling, stakeholder management and issues escalation etc), and demonstrates the ability to manage/ influence the project team.
• Supports routine supply manufacture by providing on going technical support to the IPT, participates in Tier processes and implements opportunities for improvement utilizing MPS (Our Production Systems) tools. Ensures optimum production runs, identifies constraints and non-conformances and troubleshoots to resolve complex issues in production systems. In addition, conceptualizes process designs to troubleshoot and resolve complex operational or manufacturing issues and recommend enhancements to improve production runs and enable the continuously improvement of the product cost structure.
• Manages and performs the proactive monitoring of the performance of process parameters, critical quality attributes and equipment/module(s)/unit operation(s) performance during manufacturing and cleaning. This could involve leading/participating in Prospective Process Analysis (PPA), statistical analysis and response to shifts and trends in process performance. Undertakes responsibilities as an active site product steward and is a member of the Value Chain Technical Team where applicable.
• In addition, leads Continued Process Verification and participates in Annual Product review activities as part of product lifecycle management. Applies moderately complex statistical and risk analysis tools to evaluate actions required to ensure product robustness across applicable manufacturing equipment and processes.
• Demonstrates advanced understanding of product CPP, CQA, Cpk and sterile boundary of the current validated processes. Has good knowledge of the raw materials and PCC (product contact components) used for the products under his/her responsibility.
• Actively participates and shows commitment to collaboration and sharing of best practices across the global S&T network. Typically possesses advanced and/or expert knowledge in at least one platform technology/ process.
• Complies with all divisional and site-specific policies, guidelines and procedures.
• Demonstrates and promotes Environmental, Health & Safety (EHS) leadership behaviors, ensuring that all activities are carried out in accordance with EHS requirements. Actively participates in GEMBA safety walks. Leads/ participates process hazards analyses (PHA) and applicable Process Safety Management (PSM) activities related to new/inline products.
• Where applicable, develops SOPs, gap analyses and procedures for Quality/EHS subsystems/ topics in compliance with regulatory requirements, divisional and corporate policies and guidelines. Typically possesses advanced and/or expert knowledge in at least one compliance topic.
• Demonstrates leadership behaviors in alignment with our leadership standards (Individual Contributor). Practices Inclusion as the How.
• Leads personal career development with manager assistance through annual Performance Management Process (PMP), Employee Development Plan (EDP) and career mapping.
• Any other duties as assigned by the Supervisor.

WHAT YOU MUST HAVE

Qualification:

• Bachelor's degree in a technical field, including Chemical or Mechanical Engineering, Chemistry or Pharmaceutical Sciences

Experience:

• Minimum 5 to 10 years technical experience in related pharmaceutical manufacturing industry.
• Demonstrated capability to successfully lead teams in complex projects.
• Expert knowledge of core technology/unit operations relevant to active pharmaceutical ingredient, Biotech and/or Non-Sterile manufacturing.

Leadership, Professional and Functional Competencies

• Demonstrate leadership skills in alignment with our Leadership Standards, focusing on build talent, fostering collaboration and drive results.
• Effective communication skills, both oral and written. Ability to work effectively on cross- functional teams as a leader or a core member.
• Strong Leadership capabilities, with desire for active people development in the organization.

Who we are

We are known as Merck & Co., Inc., Rahway, New Jersey, USA in the United States and Canada and MSD everywhere else. For more than a century, we have been inventing for life, bringing forward medicines and vaccines for many of the world's most challenging diseases. Today, our company continues to be at the forefront of research to deliver innovative health solutions and advance the prevention and treatment of diseases that threaten people and animals around the world.

What we look for

Imagine getting up in the morning for a job as important as helping to save and improve lives around the world. Here, you have that opportunity. You can put your empathy, creativity, digital mastery, or scientific genius to work in collaboration with a diverse group of colleagues who pursue and bring hope to countless people who are battling some of the most challenging diseases of our time. Our team is constantly evolving, so if you are among the intellectually curious, join us—and start making your impact today.

As a member of the Control & Instrumentation team, you will be responsible for the effective maintenance of control systems and instrumentation in the power plant to achieve high reliability and availability in accordance with statutory, regulatory, and safety requirements.

Responsibilities:

• Ensure maintenance work is executed effectively, efficiently and complied with safety and regulatory requirement.
• Respond and attend to plant failures and forced outages to ensure timely and proper rectification and restoration.
• Plan and ensure safe and timely execution of plant overhaul activities.
• Recommend and implement modification, upgrading and installation plans for plant system and equipment for enhancement, availability and reliability improvement.
• Manage the procurement of parts and services to meet the maintenance needs of the section, including spare parts and external services for routine and breakdown maintenance.
• Lead and manage a team of technical officers and technicians.
• Development of staff.

Requirements:

• Degree in Electronic & Electrical Engineering or equivalent recognised by the Professional Engineers Board.
• Possesses sound knowledge of Control and Instrumentation and good working knowledge of safety and statutory requirements.
• Driven self-starter with strong work ethics.
• Team player with strong analytical, technology and communication skills.
• Is available on standby after office hours for emergency calls.
• Knowledge in cyber security will be advantageous.
• Have a safety mindset and display good workplace safety behaviour.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures.
• Witness and provide contractor resources to support FAT as required.
  Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.