Headquartered in Singapore, Bluefield Renewable Energy Pte Ltd (BRE) is a Decarbonization Platform Transforming Waste into Valuable Resources and Capturing Carbon for a Sustainable Future.

We utilize our proprietary and patented cutting-edge thermo-chemical conversion technology to transform waste into valuable resources instead of channeling them to incineration or landfill conventionally.

Our technologies are endorsed by National Research Foundation of Singapore (part of Prime Minister’s Office of Singapore) and our products are certified by European Biochar Commission (EBC) and International Biochar Initiative (IBI). Be part of driving Net Zero Targets with us!

Job Description

• Support R&D efforts
• Support system audit and certification
• Support operations of systems and production
• Support the controlled tests on various feed stock types
• Perform studies on outputs by systems – i.e. quality of syngas and biochar, energy regeneration etc.
• Aid in system design and optimization, check the compliance with local and international regulations
• Participate in Hazard and Operability Analysis (HAZOP) and Hazard Identification Study (HAZID) in all system implementations
• Support in writing Standard Operation Procedures (SOPs) and operation manuals
• Support system installations and operations as required
• Support other tasks as directed by the supervisor

Requirements

• Diploma in Chemical Engineering or Bachelor's Degree in Chemical Engineering
• Fresh graduates eligible
• Knowledge in pyrolysis, syngas and biochar (good to have)
• Hands-on personality, and able to work on the ground operating/fixing the systems
• Knowledge on simulation using Aspen HYSYS (good to have)

Additional Skill Sets/Attributes

• Diligent, self-motivated and a collaborative team player
• Good interpersonal and communication skills (oral and written)
• Able to plan with gantt chart and manage on time completion of task.
• Ability to read, analyze, and interpret technical information
• Possibility of travel may arise

OUR COMPANY

RegASK is an AI-driven solution enabling end-to-end intelligent regulatory workflow orchestration: automating regulatory intelligence with curated content and actionable insights, smart documentation and a connected community of over 1,700+ subject matter experts for streamlined regulatory execution globally. RegASK augments Regulatory Affairs teams, combining AI efficiency and community-driven intelligence to streamline compliance across the product lifecycle. The RegASK team is highly diverse, with more than 10 nationalities across 3 continents, entrepreneurial and very agile, We are currently recruiting highly motivated individuals to expand its team and support its ambitious growth plans.

If you are a doer who enjoys working across industries and continents, autonomous in your working style, and eager to problem solve, we would love to hear from you.

THE POSITION

Title: Senior Full Stack Engineer

We are seeking a Senior Full Stack Engineer to work closely with the product team in order to translate their requirements and stories to web applications and functionalities in the platform.

In this role, you will benefit from the mentorship of highly skilled experts and you will be working in a fast-paced environment managing multiple projects at once, which involve stakeholders across the company.

Responsibilities:

• Join the product development team to help translate the requirements and designs into web applications or services using Node.js, Express, React, Mongo and other tools/frameworks as required
• Build scalable architectures to meet different use cases
• Work with QA team to create unit and integration tests to ensure code quality
• Weigh in on feasibility and timelines for feature development and development milestones
• Take charge of existing code base and help refactoring to meet standards where required
• Ensure proper and adequate documentation
• Align to the company’s Culture and show great team work abilities

Requirements:

• 8-10 years of experience, building web applications and services
• 3-5 years of experience with MERN stack, Python a plus
• Experience with production grade deployment a plus
• Ability to work collaboratively
• An eye for detail and the ability to develop adaptive code that can keep up with new requirements
• Strong communication skills

If you are excited about this opportunity and believe you have the skills and qualifications to excel as our Senior Full Stack Engineer, please submit your resume for consideration.

We appreciate all applications, but only selected candidates will be contacted for an interview.

Thank you for considering joining the RegASK team. We look forward to reviewing your application!

Responsibilities:

• Provide excellent customer service.
• Provide IT technical onsite support for end user services problem which includes identification, diagnosis, rectification and escalation.
• Support on desktops, notebooks, printers, scanners hardware components.
• Installation,re-installation, troubleshooting and reconfiguration of Microsoft Windows and Microsoft applications that are found in the Desktop PCs and Notebook PCs. Examples of such software are Windows 10 OS or any standard desktop OS, MS Office, Internet Explorer, MS Outlook, MS Outlook Express, etc.
• Installation of Apple IPad software’s.
• Provide support for queries, escalation, problem determination, resolution and MAC – move, add and change.
• Printer Maintenance.
• Take on and resolve complex calls or tasks the other engineers could not resolve.
• Responsible for learning and working independently.
• Responsible for providing excellent support and timely service.

Requirements:

• At least a Professional Certificate, Diploma or advanced /Higher /Graduate Diploma.
• Prefer minimum 3 years healthcare environment experience.
• Good attitude.
• Willing to learn and work in a team.
• Strong problem-solving skills.
• Excellent client-facing skills.
• Professional presence and excellent communication skills.

Skill Sets:

• Hardware Skill – Desktop, Laptop, Printer and Scanner
• Windows OS (Must know Windows 10)

* Working Days : 5.5

The Opportunity:

Adecco is partnering with a global leader in tobacco manufacturing, and we are seeking a Electrical Engineer Manager to join their business permanently! Reporting to the Director, this is an individual contributor role (part of a team) to play a key role in providing technical support to external contract manufacturer to ensure consistent production and quality of small/portable electronic devices. This role will require frequent travel (2-3 times per week) to neighboring countries to work closely with the contract manufacturers on-site.

• Full-time, permanent opportunity
• Work location: South West region (overseas travel will be borne by company)
• Work hours: Mon-Fri, 9am - 6pm
• Salary: up to $9,000 / month + AWS + VB

The Job:

• Provide technical guidance and assistance to external contract manufacturers to resolve electronic engineering-related issues encountered during production.
• Work closely with manufacturers to implement and uphold stringent quality control measures, ensuring consistent and reliable product standards.
• Identify and implement opportunities to enhance manufacturing processes and improve operational efficiency.
• Investigate and address electronic engineering challenges to minimize production delays and defects.
• Collaborate with design and development teams to incorporate design changes that improve product quality and ease of manufacturability.
• Support investment audits in coordination with other departments and conduct periodic physical asset inspections.
• Assist with annual inventory checks.

The Talent:

• Bachelor's degree in Mechanical Engineering or any related field.
• At least 5 years in EMS (Electronics Manufacturing Services) with a strong understanding of overall supply chain, manufacturing technology, process set-up, process validation and SOP support.
• Knowledge of electrical device assembly is a must.

Next Steps:

• Prepare your updated resume (please include your current salary package with full breakdown such as base, incentives, annual wage supplement, etc.) and expected package.
• To ensure your application is reviewed, attach your resume and email [email protected] or apply directly here. We'd love to hear from you!
• We regret that only shortlisted candidates will be notified.

Dependable Solutions Partner Pte Ltd

· We are a well-established growing company, ready for the next phase of expansion.

· We offer a work culture where everyone wins as a team, through trust, support and respect.

Responsibilities

• Responsible for the overall, coordination, implementation and execution of projects ensuring consistency with company commitments and goals

• Good organisation and time management skill, able to work independently with minimum supervision

• Perform project co-ordination works between client, suppliers and sub-contractor pre and post project implementation

• Monitor and report the progress of the projects to all stakeholders

• Able to work under tight deadlines

Assistant Project Engineer/Project Engineer (M&E)

Visit https://ourengineers.com to apply or submit your CV for more job opportunities.

Responsibilities:

· Maintains project team accomplishments by communicating essential information; coordinating actions; obtaining expert input; reviewing open issues and action items; contributing information to team meetings and reports; escalating project completion impediments.

· Day-to-day management on site, including supervising and monitoring the site and co-ordinate sub-contract works.

· Liaise with clients and consultants on project.

· Produce proper reports and documentation before and after project completion.

· Complies with codes and regulations by complying with requirements; preparing permit applications, plans, and compliance reports.

· Assist to update of As-Built drawing on site.

· And all other General Administration works as instructed.

Requirements:

· Minimum Diploma or equivalent.

· Min 2 years working experience in M&E at Interior Design Fit up(Electrical / ACMV / Plumbing / Fire Protection)

· Able to work independently and possess good interpersonal skills.

· Able to start work immediately or within short notice

Visit https://ourengineers.com to apply or submit your CV for more job opportunities.

Responsibilities

• Coordinate with internal team in Singapore / India & liaise with customers / consultants on day to day basis
• Preparation of project documents including BQ
• Handling Design & Build projects
• Prepare optimised design solutions for projects
• Prepare Design drawings (Single Line Drawings & layout)
• Prepare design calculations incl voltage drop, short circuit current etc.
• Support multiple M&E projects concurrently
• Lead project meetings and work with team members to achieve the deliverables on-time
• Ensure drawings & documents are well maintained & stored in a timely manner
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Electrical Engineering
• Minimum 5 yrs of relevant hands-on M&E experience in construction industry and LTA projects
• Need to be familiar with Singapore codes such as SS638 (CP5), SS650, SS555 etc
• Hands-on experience in AutoCAD drawings is preferred
• Familiarity in BIM (Revit / Navisworks) is advantageous
• Having consultancy experience is preferred
• Possess effective organizational and follow-up skills, meticulous
• Good communication skills
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Responsibilities:

• Report to Project Director on project management, site management, and risk control to achieve project goals.
• Handle construction planning, scheduling, baseline programs, and coordinate with consultants, contractors, and suppliers.
• Monitor project schedules and report progress according to the baseline program.
• Assist PD in preparing project reports (e.g., monthly reports, VO management, EOT assessments).
• Liaise with clients, authorities, consultants, subcontractors, and suppliers on project matters, providing technical and non-technical solutions.
• Conduct technical reviews to ensure contractual compliance and timely completion.
• Support the Contracts Department with tenders, including drawings, method statements, proposals, and claims preparation.
• Attend meetings with clients, consultants, and contractors to ensure progress remains on schedule.
• Oversee quality control, safety, and EHS practices on-site, identifying high-risk activities and approving method statements.
• Undertake additional duties as assigned by management.

Requirements:

• Diploma and above in Civil Engineering or equivalents.
• Minimum of 5 years of relevant working experience.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Planning, co-ordination and execution of LTA and SMRT projects

To attend all interface and co-ordination meetings with different stakeholders and contractors

Installation, monitoring, supervision, testing and troubleshooting of RTU at site

Preparation of project documents and drawings

Requirements:

Relevant Diploma in Electrical Engineering/Computer Engineering from a recognised Polytechnic

Strong interpersonal skill with a positive attitude

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

The School of Mechanical & Aerospace Engineering (MAE) is a robust, dynamic and multi-disciplinary international research community comprising of world-class scientists and bright students. MAE prides itself in its excellent research capabilities in areas including advanced manufacturing, aerospace, biomedical, energy, industrial engineering, maritime engineering, robotics, etc. The school is equipped with state-of-the-art research infrastructure, housing a comprehensive range of cluster laboratories, test bedding facilities, research centres/institutes and corporate laboratories. Cutting-edge research in MAE addresses the immediate needs of our industries and supports the nation’s long-term development strategies. In the new era of industrial 4.0 and sustainable living, MAE is rigorous in developing new competencies to support the growth and competitiveness of our engineering sector in the global landscape. MAE has grown to be leader in Engineering Research, ranking amongst the top engineering schools in the world.

For more details, please view https://www.ntu.edu.sg/mae/research.

Research Engineer, Algorithm and Operation Researcher for VR/AR system development

• Support the development of advanced VR/AR systems to enhance research. This position focuses on developing Unity-based applications, designing and integrating virtual environments with real-time tracking data for immersive visualization.

Key Responsibilities:

• Join the team to development of advanced VR/AR systems:
• Develop Unity-based applications for dynamic visualization and seamless user interaction.
• Design and implement immersive VR environments.
• Create and enhance high-resolution 3D models of animal and terrains, adding articulated joints for realistic movement and animation of animal model.
• Complete necessary technical documentation writing, summarizing and recording according to project progress.
• Collaborate with the team to achieve project milestones and undertake additional tasks required for successful project completion.

Job Requirements:

• Bachelor’s degree/master’s degree/PhD in computer science, electrical engineering, mechanical engineering or relevant area.
• At least 2 years of experience in Unity or Unreal Engine development.
• Experience with 3D modelling software (e.g., Blender, Maya).
• Proficiency in C# programming.
• Familiarity with VR hardware, especially Meta Quest Pro or equivalent devices.
• Hands-on experience with VICON tracking systems or similar technologies is advantageous.
• Relevant project experience in VR/AR development.

We regret that only shortlisted candidates will be notified

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Planning, co-ordination and execution of LTA and SMRT projects

To attend all interface and co-ordination meetings with different stakeholders and contractors

Installation, monitoring, supervision, testing and troubleshooting of RTU at site

Preparation of project documents and drawings

Requirements:

Relevant Diploma in Electrical Engineering/Computer Engineering from a recognised Polytechnic

Strong interpersonal skill with a positive attitude

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Planning, co-ordination and execution of LTA and SMRT projects

To attend all interface and co-ordination meetings with different stakeholders and contractors

Installation, monitoring, supervision, testing and troubleshooting of RTU at site

Preparation of project documents and drawings

Requirements:

Relevant Diploma in Electrical Engineering/Computer Engineering from a recognised Polytechnic

Strong interpersonal skill with a positive attitude

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Planning, coordination, and execution of substation automation projects.

Design, costing and integration of substation automation systems according to project requirements.

Installation, testing and troubleshooting of substation automation systems at site.

Preparation of project documents and drawings.

Requirements:

Diploma in Electrical Engineering/Computer Engineering

Knowledge of data communication and Automation Systems for Electrical Network

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Responsibilities:

• Identifies, troubleshoot problems and performs root cause analysis study of equipment failures, recurring breakdown, and equipment defects in order to take effective corrective and preventive
• Liaises closely with Engineering on technical specifications required for machinery fitting, documenting the project requirements for the arrangement of machinery, equipment and system installation work
• Assists with the preparation of procedures, risk assessment, HSE work method statement and etc. under the supervision of senior team members and Project Manager to ensure all the requirements have been fulfilled
• Prepares job-list, work schedule and planning of manpower resources (i.e. yard and contractors) and facilities, working closely with the team members
• Participates in project meeting with Project team members and stakeholders to note on project specifications and report on the status of the work progress
• Liaises closely with HSE department and subcontractors for proper on-site coordination, working with QA/QC team members, owners, statutory and classification authorities on inspection arrangement and compliance review
• Maintains the equipment/ machineries at the workshop and on-board, ensuring the proper working condition, timely calibration, repair, or servicing as required
• Understands emerging engineering practices by participating in educational opportunities, professional organisations; reading professional publications and maintaining personal networks
• Recommends changes to work method/ process by reviewing the workflow and work process to implement changes for improvement and to achieve operational effectiveness and functionality

Requirements:

• Bachelor’s degree in Mechanical Engineering/ Marine Engineering or related engineering disciplines
• Entry Level candidates are welcome to apply (On Job Training will be provided)
• Excellent proficiency in English (written and spoken)
• Must be able to board ships, enter confined spaces with limited visibility and have the ability to climb up and down stairs and/or ladders of varying heights.
• Good in planning, organizing, and interpersonal skills and able to work independently

Working hours & locations:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide Transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Process Equipment – CQV Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Experience in conducting equipment/facility FAT/SAT, IQ/OQ/PQ protocols, and serving as both author and executor of QSR (KAYE validator).

· Proficient in writing PQ, cleaning, development/study protocols, SOPs, and work instructions.

· Responsible for raising Change Control requests, identifying tasks, and performing impact assessments, with a focus on processes and process equipment.

· Experienced in writing deviations related to processes, cleaning, and process equipment (PQ).

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

Possess extensive knowledge of power plant systems and operations, along with strong leadership skills to lead a small team of engineers and technicians. This role is crucial for ensuring that all plant engineering tasks are executed correctly. The successful candidate will oversee plant engineering designs to guarantee that the plant operates efficiently and safely.

Key Responsibilities:

• Responsible for plant engineering design activities for power plant project including cable sizing calculation, cable routing, connection drawing, loop drawings, termination diagrams
• Work with 3D design team for 2D deliverables
• Lead, mentor, and manage a small team of engineers and technical staff
• Collaborate with different parties for plant engineering coordination and support site inspection
• Provide technical support for project manager for project engineering milestone deliveries
• Support purchasing team for technical evaluation and price optimization

Desired Characteristics:

• Knowledge of onshore power plant design engineering, prefer to have work exp in Singapore.
• Experience in coordination, leading and managing plant engineering teams.
• Familiar with complicated cable tray route, cable tray support engineering design, equipment layout, installation materials, cable glands selection, cable drum schedule, cable route schedule, cable termination material, and so on.
• Proficiency in relevant engineering software and tools, such as Revit, Navisworks, Autocad
• Min 6 years experience in Electrical composite plant project

Duration: 6 months (may be extendable)
Work Location: Ayer Rajah
Working hours: 8hours a day, 5 days a week

• Responsible for the Energy meter market and sales of HVAC BTU meter to the industrial and commercial building as part of Building Management & Monitoring System.
• Selling and marketing of our wide range of Electromagnetic Flow meter, Ultrasonic clamp-on flow meter, Turbine Flow meter , Thermal Mass flow for air/gas application , Coriolis Mass flow, PD meter, Variable Area flow meter, Vortex Flow meter, Loadcell based or Radioactive base Conveyor Belt mass flow meter ,Venturi and Orifice flow meter and flow switches
• Selling and marketing of a wide range of complementary flow computer, flow controller , batch controller, flow display monitor, process and digital panel meters.
• Selling and marketing of a wide range of Magnetic level gauge, displacer , Magnetostrictive and float operated level transmitter, Non Contact Radar, Guided-Wave Radar and ultrasonic Level transmitter, capacitance & RF /Admittance level Transmitter , DP ( include Bubbling DP ) & Immersion pressure type level transmitter, Radioactive based Level measurement , Level switch and Sensor to detect overflow/ overfill of liquid and bulk solid storage tank.
• Selling and marketing a wide range of Pressure and temperature sensor c/w thermowell for use with flow computer, ACMV / HVAC BTU meter.
• Selling and marketing of a wide range of chart and paperless recorder, digital display & controller, Modbus display and monitor, signal generator and signal conditioner , Lightning Protection Unit ( LPU ) , Signal Surge Arrestor, Intrinsically safe barrier and isolating amplifier.
• Selling and marketing a wide range of analytical instruments such as Oil on water alarm for pollution monitoring, air leak alarm , PH/ REDOX / TSS , Microwave based moisture and total % weight / concentration meter and density meter etc…

As our Brands and type of Products we carry is very wide , you will be assigned for the products that suits your strength and experience

Job Requirements

• Engineering Degree, Technical Diploma in ICA ( Instrumentation Control & Automation ), Mechatronics /Electrical and Electronics, candidates strong in Physics & Chemistry, ITE graduate with proven track record are welcome.
• Strong in oral and written presentation skills coupled with customer centric service mindset is likely to excel
• Require a basic understanding of IOT / SCADA / Building Management Monitoring & Control System will be very helpful
• Candidate who is inclined towards hands on and practical is likely to excel

This is a Field Sales position, candidates with prior field sales or service experience will be helpful although training will be provided

Company’s Profile:

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for Software Engineers to join their team and contribute to their ongoing success.

Location: Ang Mo Kio/Yio Chu Kang area

Job Responsibilities:

• Design solutions that meet functional requirements.
• Develop end-to-end specifications for solution components.
• Perform testing and implementation of the solution.
• Participate in impact analysis of encountered issues.
• Contribute to continuous improvement of software development best practices in the areas of coding tools, languages and APIs, as well as software design and development processes.

Participate in UX activities such as:

• Conduct user research/interviews
• Develop user stories, storyboards to articulate current and future concepts
• Create wireframes, detailed visual mock ups and interactive prototypes
• Create style guides and digital assets for production

Requirements:

• At least 3 - 4 years’ Software Engineer experience, with strong expertise Java / C++ languages
• Good understanding of software development lifecycle processes
• Proficiency in Web Technologies such as HTML, CSS
• Diploma or Degree in any IT discipline or equivalent

Interested candidates may whatsapp your resume to 6421 4965. Only shortlisted applicants will be contacted.

Cassie Chan | R2197426

Talentsis Pte Ltd | EA No: 20C0312

Assistant Engineer (Project Management )

Summary:

• Equipment set up for various systems, conduct testing & commissioning

• Follow up with clients in a timely manner

• Assist sales team with site survey & system design

• Provide support and manage project

• Perform troubleshooting & repair / replace faulty parts

• Provide onsite support to diagnose and rectify technical issue

• Ad hoc duties as required

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science , Electrical / Electronic / Mechanical / Mechatronic or engineering field

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Must have at least 1 year experience in handling cable wiring / electrical project

• Good working attitude and self-motivated

Mon to Fri 9am to 6pm

The role is responsible for Equipment Package Ownership (full lifecycle – Engineering Design, Build, Testing (FAT), Installation and Commissioning), including experience in commissioning and qualification of process equipment.

Responsibilities:

● Experience in upstream / downstream / Central services process operation, (experience in equipment design for process equipment will be an advantage).

● Project scheduling and able to come up solutions to keep the schedule on track when there are hiccups.

● Responsible for basic and detailed design, commissioning and qualification activities, including URS development, FAT, SAT, DQ, IQ, OQ and PQ.

● Review industry practices for best-in-class approach.

● Ensure that the appropriate Quality standards are applied consistent with best practice and internal Quality Standards and expectations.

● Deliver the project from conceptual through implementation phase, encompassing support for a wide range of engineering and construction requirements.

● Coordinates with different functions like manufacturing, safety, MSAT, validation and quality for implementation of changes associated with the project.

● Work independently and/or with the project manager to complete the engineering projects within schedule, budget and quality constraints.

● Agile response to equipment issue, troubleshoot and come up with solutions swiftly.

● Any other task as assigned by Supervisor/Manager.

About You:

● Diploma/Degree in Chemical Engineering, Chemistry or equivalent with at least 5 yearss experience in a process engineering role or similar role with a biologics manufacturing plan.

● At least 5 years of relevant working experience in the Pharmaceutical / Biologics manufacturing industry with experience in Process Engineer.

● In Biologics industry with understanding of cGMP requirement.

● Should have Design experience at various stages of project (Base, Detailed design).

● Able to support Installation, Commissioning & Qualification activity at site.

● Must be able to drive project.

● Any other task given related to Process.

Contract length: 12 Months. Option to extend depending on performance and business needs.

• Formulate and implement sales strategies to increase market share for specialty gases in the semiconductor foundry industry.
• Interact with semiconductor clients to identify their technical and operational requirements and propose suitable products.
• Deliver technical presentations, product demonstrations, and address customer inquiries to ensure comprehensive product understanding.
• Collaborate with relevant internal and external parties to manage the delivery and storage of specialty gases.
• Establish and nurture strong relationships with customers, prospects, and key industry figures.
• Create and present sales proposals, pricing options, and negotiate contracts.
• Keep abreast of industry trends, competitor activities, and emerging technologies to uncover new business opportunities.
• Achieve sales targets and key performance indicators (KPIs).

Requirement:

• Bachelor’s degree in science, engineering, or related field.
• 1-2 years of experience in sales, technical support, or engineering roles within the semiconductor industry.
• Proven track record in sales, with strong problem-solving and customer interaction skills.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

EA License No: 20C0270

EA Personnel No: R22110981

EA Personnel Name: Law Mei Fong

Position: Service Engineer (Product: Microscopes)
Location: Tai Seng, Singapore
Salary: $2,800 - $3,300, commensurate with experience and educational background
Additional Benefits: Monthly mobile and commuting allowance

Key Requirements:

• Education: Diploma in Engineering
• Experience: 1-2 years in field service, ideally in medical device servicing, with exposure to small, delicate parts
• License: Class 3 driving license preferred

Job Responsibilities:

• Visit clients’ sites to perform servicing and maintenance on microscopes
• Handle small microscope parts with care and precision

How to Apply: Send your resume to Jocelyn Chan at [email protected] or contact via Telegram @jocelynchan

Jocelyn Chan | Consultant | Recruit Express Pte Ltd (Healthcare & Lifescience) Company EA Licence Number: 99C4599 Personnel EA License: R1331820

Working within the Embedded SRE organisation, the Application Support Analyst will be handling the day-to-day operations including handle, triage and escalate on alarms and issues that may arise.

Job Responsibilities

• Provide Level 1 troubleshooting support and response, and be on standby up to 12h a day during the week of standby.
• Log, escalate and follow through with issues, ensuring that issues are resolved.
• Review and improve our alarms and alarm response.
• Periodic reviews and submission of the capacity needs of the business.
• Support and/or drive disaster recovery response drills.
• Deploy new versions of the software.
• Generate reports on the operational workloads, review capacity needs of the business, support and/or drive disaster recovery response drills.

Requirements

• Diploma/Bachelor's Degree in Computer Science or other related discipline.
• 2-5 years of Technical/Application Support experience on various technology platforms.
• Responsible and proactive approach to resolving problems, and being able to have a structured approach to problem-solving.
• Open to work shift work and be on on-call rotation.

About EPAM

EPAM is a leading global provider of digital platform engineering and development services. EPAM has been expanding in Singapore since 2013 and delivering the best solutions to our customers. As a recognized leader, EPAM Singapore achieved Great Place to Work® Certification in 2023 and is committed to providing our team with inspiring careers.

You will have the opportunity to work with fellow talented technologists and accelerate your career by participating in our numerous upskilling, training, and certification programs. That is why EPAM Singapore was awarded Gold for Best In-House Certification Programmes in the Employee Experience Awards 2023 and Silver in the SkillsFuture Employers Awards 2022 for our efforts in championing employees' skills development and building a lifelong learning culture at the workplace. You can also look forward to developing holistically with the multiracial festivals and various wellness and cultural activities organized by our passionate colleagues here.

Why EPAM?

• By choosing EPAM, you're getting a job at one of the most loved workplaces according to Newsweek 2022 & 2023.
• Employee ideas are the main driver of our business. We have a very supportive environment where your voice matters.
• You will be challenged while working side-by-side with the best talent globally. We work with top-notch technologies, constantly seeking new industry trends and best practices.
• We offer a transparent career path and an individual roadmap to engineer your future & accelerate your journey.
• At EPAM, you can find vast opportunities for self-development: online courses and libraries, mentoring programs, partial grants of certification, and experience exchange with colleagues around the world. You will learn, contribute, and grow with us.

What You’ll Do

• Drive the delivery of global components and solutions, design and integrate them in various stages of software development life cycle.
• Coordinate your work with other developers to deliver first-class technology solutions.
• Work closely with other Product and Technology teams, internal and external, to bring technology solutions and perspectives to the product development process.
• Provide input on, follow and evangelize code quality guidelines and standards.
• Participate in code reviews to highlight best-of-breed solutions.
• Identify/troubleshoot application code-related issues, and review and provide feedback to any required final user documentation.

What Will Make You Shine

• A minimum of 6 to 9 years of experience in software engineering.
• Degree in Computer Science or equivalent.
• Proficiency in Java programming language for both backend and front-end development is essential.
• The ability to adopt and integrate evolving technologies and frameworks to contribute effectively to the development of Retail Banking solutions.
• Strong collaboration skills with team members, and the capacity to engage effectively with third-party vendors to ensure successful project delivery.
• A demonstrated enthusiasm for embracing new tasks and overcoming challenges.
• A proactive approach and commitment to embracing a culture of continuous learning, along with the ability to adapt rapidly to new tools, languages, and methodologies.
• The expectation to actively participate in the creation of solutions from scratch, utilizing input from analysts and product owners.
• The ability to undertake research and development activities to explore innovative solutions and technologies.

How We Hire

Here, we summarize the typical journey to finding a job within EPAM:

• Apply and tell us about yourself
• Go through some standard interviews:

1. General interview with a recruiter
2. Technical interview with our technology experts
3. Manager interview or Offer interview with a hiring manager

• Get ready to join the team

Not sure if you meet all the requirements? No problem. Let’s talk anyway and find out more.

It takes 1 min of application to start the journey with us. Apply now!

Responsibilities:

The successful candidate will be responsible for the design and development of one or more devices that are part of an integrated e-payment Fare Collection System. The successful candidate will also be involved in the software development lifecycle from definition of requirements to design and development, and testing.

The activities required to be performed shall include the following:
•Requirements gathering.
•Design and develop software applications for embedded devices.
•Implement and optimize communication protocols (e.g.TCP/IP, HTTPS, FTPS/SFTP, MQTT-S) to establish secure and reliable connections between embedded devices and on-premises/cloud platforms.
•Conduct thorough testing, debugging and troubleshooting of embedded devices to identify and resolve issues related to functionality, connectivity, performance and reliability.
•Preparation and submission of deliverables throughout the Software Development Lifecycles (SDLC) such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual,
Training Manual and others documents as required in the SDLC processes.

•Assist day-to-day application support issues.
•Liaise with users on the requirement testing and production issues.

Qualifications & Requirements:

•Degree in Electrical / Electronics / Computer Engineering / Computer Science or a relevant discipline.
•Developed software in at least one full Software Development Lifecycle.
•Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object-oriented software design and UML modelling
•Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).
•Experience in multi-threading, socket programming and serial/USB communication.
•At least 5 years’ experience in object-oriented software development.
•Familiarity with docker container development and AWS Greengrass is a plus.
•Prior experience in following areas Scrum AGILE methodology process is a plus.
•Scrum AGILE methodology process.
•Develop and integrate embedded devices with cloud platforms.
•Strong analytical and problem-solving skills.
•Good written and verbal communication skills.
•Self-motivated, independent and a good team player.