To liaise with consultant, client, and sub-contractors on the progress of M&E works.

To prepare method of statement, shop drawings, sample units, T&C sheets, work progress report, and other relevant documents for M&E related works.

Equipment design including Air Handling Units, Computer Room Air Handling Units, Cooling towers, Chillers, Sequence of Operations, Control Systems, Fire Detection/Suppression system

To coordinate with sub-contractors and consultants on preparation and submission of shop drawings and material/ samples

To coordinate, prepare, and check the technical submission for resolving of site issues and drawings issues.

Develop and keep up to date all site mechanical procedures including EOPs, SOPs, MOPs, and APs. All documentation should be consistent with current client standards.

Assist Technical Manager and all M&E issues including the preparation of M&E master and T&C schedule.

Manage and arrange for M&E progress inspection (R1, Fire Audit, etc), documentation for audit, use of resources and coordination works from the beginning until completion.

Requirement:

Bachelor Degree in Electrical / Mechanical Engineering accredited with PEB

8 years of experience as a Senior Engineer or M&E Manager

@ [email protected]

Job Description:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies.

We are seeking a Senior Engineer with system integration expertise with design oversight to join our team. As a vital member of our team, you will be involved in the design, development, and testing of medical devices, ensuring compliance with regulatory standards and industry best practices.

Your role will involve collaborating with cross-functional teams to create innovative solutions encompassing hardware, software and chemistry by conducting verification and validation activities, and providing technical support throughout the product lifecycle.

The ideal candidate will have a solid understanding of system integration principles, best practices in verification and validation testing, and knowledge of medical device regulations (such as ISO 13485).

Join our dynamic team and contribute to the development of cutting-edge medical devices that improve patient care and well-being.

Job Roles and Responsibilities:

• Develop high-level system architectures that meet user requirements while considering design feasibility.
• Ensure that all system components are compatible and can be integrated seamlessly.
• Design and implement integration strategies and validate the functions as intended while adhering to design principles.
• Lead collaborative teams for the design, implementation, and validation while is capable to perform hand-on testing independently if required to complete engineering or verification studies.
• Lead creating innovative solutions that align with both technical specification and user needs for medical products.
• Coordinate between design, engineering, assay, project manager, and other disciplines to ensure cohesive product development.
• Author or oversee the writing of protocols and reports.
• Foster collaboration among team members to address challenges from both a technical and design perspective.
• Creating and maintaining technical documentation, including design specifications, test protocols, and reports, ensuring compliance with regulatory requirements such as ISO 13485.

Job Requirements:

• Experience in system integration and innovation.
• Bachelor’s degree in Engineering, Design or equivalent engineering or science background.
• Comfortable with navigating uncertain situations without clear guideline.
• Adaptability to changing work conditions and project requirements.
• 5-10 years’ experience in cross-functional product development roles and completed one full product development cycle.
• Track record in working effectively with diverse teams, including engineering, design, and marketing.
• Strong interpersonal skills to facilitate communication between technical and non-technical stakeholders and ability to summarize and communicate complex problems in simple terms.
• Strong analytical skills to troubleshoot integration issues while considering design implications.
• Able to break down complex system in simple steps and identify interfaces between modules and generate system diagrams, workflows and reports.
• Curious and proactive approach to gather information necessary for decision-making.
• Knowledge of statistical tools for data analysis such as (Python/Matlab/Origin/LabView) will be a strong advantage.
• Experience with design software. Experience with CFD simulation software such as ANSYS is advantageous.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description

• Industry/ Organization Type: IT Communications Service Provider
• Position Title: System Support Engineer (Telecommunication/ PABX)
• Working Location: Central (Nearest MRT: Mattar)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Basic + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Configuration of Voice/Network peripherals, VoIP/ Cloud PABX, Network Switches etc.
• Provide helpdesk and remote support to customers, as well as onsite technical troubleshooting.
• Validate System Design Documents to ensure alignment with customer requirements.
• Build and maintain strong customer relationships through a proactive approach and positive attitude.
• Continuously acquire and update product knowledge in line with industry trends.

APPLY NOW!!!

• At least ITE with minimum 1 year of related working experience.
• Experience in deploying and managing Voice/Data project, supporting VoIP telecommunication systems, network switches, troubleshooting LAN/VoIP systems is an advantage.
• Good knowledge in IT and communication system/PABX is required
• Alcatel, Mitel and Yeastar PABX knowledge will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71498 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

We are representing a leading HVAC equipment manufacturer with over 30 years of industry presence in Singapore to look for an experienced Electrical / Mechanical Engineer.

Location: Kembangan
Working hours: Mon to Fri, 8am to 5pm & Sat, 8am to 3pm
Salary: Basic up to $4000, depending on experience

Job scope:
- Perform diagnosis, testing, repair, and overhaul of mechanical, electrical, and electronic components of chillers
- Assist with product improvement / R&D design of existing chillers through redesign of PCB & PLCs
- Liaise with internal & external stakeholders such as production, sales & marketing, customers and contractors

Requirements:
- Min. Diploma in Electrical / Mechanical Engineering or any relevant discipline
- Licensed Electrician will be a bonus
- Able to use AutoCAD to create engineering & electrical drawings
- Class 3 license would be advantageous

To apply, submit your updated resume to [email protected] and quote "Chiller / HVAC Engineer".

Sylvie Yong (R1769137)
The HR Ecology Pte Ltd (13C6391)

Responsibilities

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Mumbai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

At TikTok, our people are humble, intelligent, compassionate and creative. We create to inspire - for you, for us, and for more than 1 billion users on our platform. We lead with curiosity and aim for the highest, never shying away from taking calculated risks and embracing ambiguity as it comes. Here, the opportunities are limitless for those who dare to pursue bold ideas that exist just beyond the boundary of possibility. Join us and make impact happen with a career at TikTok.

About the Team:

The TikTok Fundamental team will focus on frontend development. We will also focus on understanding our users, identifying opportunity areas, prioritizing the problems we must solve, and rapidly creating innovative user experience solutions. We are looking for experienced frontend engineers to develop web/hybrid applications.

1. To develop user-interfaces for TikTok Live on PC/ Mobile Devices, including Middle platform, Operating platform, Products for users, Events with Multi-scales and etc.

2. To develop infrastructures such as engineering solutions that will be supporting TikTok Live's business and productivity tools and platforms.

3. Create the ultimate user experience and support the growth and development of the TikTok Live Ecosystem with high-quality design and coding.

4. Explore and implement efficient collaboration methods to enhance the efficiency of remote and cross-regional communication and support the iteration of our business.

Qualifications

1. Solid front-end programming skills with experience in solving browser compatibility issues and optimizing front-end performance.

2. Understand front-end engineering and component development, having a certain design skill set and familiar with at least one MV* framework.

3. Having excellent service awareness, learning ability, communication and collaboration ability and english language skill to use in communication and collaboration.

4. Good to have experience in multi-end (Native/PC/Server) development.

5. Good to have experience in participating or leading large-scale projects and open source projects.

6. Good to have experience in writing tech articles or tech blogs.

Preferred Qualification

Minimum 3 years relevant work experience from a large-scale internet business

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

• 5 days, 8.30am- 5.50pm
• Salary: $3500 + Allowance
• Location: East, and clients site whenever required

Job scope:

• To provide support on maintenance project.
• Handle system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.
• Hands on experience in managing LAN / WAN / Routers / Switches / DNS / VPN and Firewall is preferred.

Requirements:

• At least a Diploma in Engineering (Electrical/Electronic), Computer Science/Information Technology or equivalent.
• Must have at least 1-2 years of Server experience
• Able to work on scheduled standby on rotating weeks

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

*Entry Level* Quality Assurance Engineer | Java | Whitebox

Working Hours: Monday - Friday (Hybrid)

Working Location: Central

Remuneration Package: Up to $4,000 + AWS + Performance Bonus

Join our team as a Quality Assurance Engineer (Whitebox) where you'll play a critical role in ensuring the quality and reliability of our software products. Collaborate closely with development and project management teams, create comprehensive test plans, execute automated scripts, and track bugs to drive continuous improvement.

Responsibilities:

• Review requirements, specifications, and technical design documents to provide timely and meaningful feedback.
• Develop detailed, comprehensive, and well-structured test plans and test cases.
• Estimate, prioritize, plan, and coordinate testing activities.
• Design, develop, and execute automation scripts using automated testing tools.
• Identify, document, and track bugs thoroughly, ensuring proper resolution and regression testing.
• Monitor debugging process results and track quality assurance metrics such as defect densities and open defect counts.
• Stay updated with new testing tools and test strategies.
• Coordinate with the development and project management teams for smooth System Integration Testing (SIT) and User Acceptance Testing (UAT) processes.

Requirements:

• Bachelor's degree in Computer Science, Engineering, or related field.
• Good to have experience software quality assurance with strong knowledge of QA methodologies, tools, and processes.
• Good to have experience in writing clear, concise, and comprehensive test plans and test cases.
• Familiarity with Agile/Scrum development processes.
• Good to have hands-on experience with both white box and black box testing is a plus.

"By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

Contact you about potential opportunities.

Delete personal data not required at this application stage.

To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Aloysius Tan Sheng Rong - R22110441

ScienTec Consulting Pte Ltd - 11C5781

Job Summary

You will be working with a team of professional engineers to challenge status quo, think different, thrive in ambiguity to meet mission objectives of our customers. You will lead a team of software engineers and work closely with other cross functional teams, Service Delivery Managers and Project Managers to deliver quality satellite ground software systems to our customers.

Job Responsibilities

• Drive the design and architecture of satellite ground control and antenna management software systems.
• Lead software team in implementing design, testing, verification, and validation of all software components.
• Implementation of cybersecurity measures for software applications
• Generate and maintain software development documentation.
• Plan and provide necessary software maintenance, training, and consultancy to users on the deployed software.
• Continuously develop new skills & techniques in software technologies to improve and reduce software development time and effort.
• Participate in the definition and development of future products.
• Collaborate with various stakeholders including customers, and engineering teams across organizations.
• Able to challenge the status quo, think different, thrive in ambiguity, care for team members and being ever curious.

Job Requirements

• Knowledge in Computer Engineering or related field.
• At least 8 years’ experience in mission critical system software development.
• Proficient in developing full stack applications, preferably with C#, JS.
• Experience with database, API design, network architecture, message broker, and cloud technologies.
• Experience with core engineering infrastructure tools such as GIT servers, CI/CD pipelines, Container Technologies.
• Familiar with agile software development lifecycles.
• Good understanding of hardware.
• Able to communicate in English and work in a fluid, innovative environment.
• Singaporean only

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Responsibilities

• Outline detailed requirements and scope of work for contractors.
• Manage the startup, testing, commissioning, and troubleshooting of equipment.
• Create and oversee the development of Single Line Diagrams, control schematics, and PLC/HMI programming.
• Ensure projects are executed efficiently and within established timelines.
• Provide preparation and support for installation teams.
• Open to traveling and taking on assignments internationally.
• Collaborate with the support team to deliver control software solutions.
• Identify and resolve system issues to minimize downtime and ensure smooth operations.

Requirements

• Degree Electronic/Electrical/ Mechatronic Engineering or related discipline
• At least 5 years of relevant working experience in process industries such as Food Manufacturing, Chemical Manufacturing industries.
• Experience in building of whole plant design.
• Control Panel Design Knowledge
• Candidate must be comfortable working in Tuas
• Candidate must be open for 1 year contract with possibility of converting to a permanent staff depending on the individual and project performance.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting,

using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Responsibilities:

• To follow strict instituted workplace security policy at the customer premises.
• Provide Level 1 and Level 2 technical support, perform networking routing and switching problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem, escalate to next level of support, track and get the issue resolved within the specified time as agreed with the customer.
• Perform configuration change activities as per instructions & guidelines.
• Provide problem status to the Service Desk and/or update into the ticketing tool according to the Procedures Manual.
• Perform day-to-day Network operation for the Network Infra-structure and Network Equipment at the customer/IBM premises, including performance monitoring, bandwidth monitoring.
• Work with customer's vendor to perform testing and preventative maintenance according to the schedule provided by the customer for the Network Equipment
• Perform periodic OS upgrade and Patching as and when required.
• To perform 24X5 rotational 12 hours shift onsite availability and 24X7 standby / remote support availability as and when needed for critical incidents.
• Provide proactive incident reports for all Network related problems, faults, events.
• Respond to all fault calls inclusive of emails and other forms of communications for Firewall related issues and problems reported
• Provide multi-vendor equipment support across a wide range of models and types of networking equipment
• Perform security activities like hardening/periodic health check/ ID validation and other compliance activities as per customer’s security policies and standards.
• Maintain/Update IT hardware and software inventory list and compliance related databases or similar Databases.
• Maintain the device inventory list for the customer when needed, Maintain the software/firmware for all the devices up to date. Maintain the inventory of certificates/license file and install/update/renew certificates/licenses as and when required.
• Subscribe to vendor notifications for the managed devices for vulnerabilities and review/validate/apply security patches pro-actively.
• Perform device activation / deactivation as per customer’s service activation and deactivation process.
• Maintain the IP address inventory and allocate new IP address when required by business.
• Engage third part vendors to resolve hardware issues and follow up till closure
• Monitor vendor End of Life / End of Support notifications for all In Scope Devices and inform the client.

Requirements:

• Diploma or Bachelor’s degree in in Information Technology, Computer Science, Engineering or equivalent.
• At least 5 years work experience providing Level 1 and Level 2 networking technical support in a 24x5 Network Operation Center environment.
• Must be able to work on 12 hours rotational shift on a 24X5 onsite and 24X7 standby / remote support team setup.
• CCNP certification preferred.
• Expert level knowledge in implementation and maintenance of Cisco Routers and Switches of all series.
• Good knowledge in Cisco IOS
• Good knowledge in implementation and operations support of NAC (network access control)
• Good knowledge in Aruba Clear Pass / Cisco ISE
• Good knowledge in Wireless Network / Access Points / Controllers support and troubleshooting
• Expert level understanding of the OSI or TCP/IP model
• Hands-on experience with monitoring, network diagnostic, Packet Tracers and network analytics tools
• Good knowledge on Firewall Products like Cisco ASA, FortiGate, Palo Alto, Checkpoint
• Good knowledge on Aruba ClearPass/Cisco ISE, Cisco wireless controllers
• Knowledge on F5 load balancers.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible and focus on improving tool performance and availability, in charge if maintenance, diagnosing failures and implementing effective solutions to meet uptime and cycle time requirements in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD); or Physical Vapor Deposition.

Key Responsibilities

• Maintain equipment performance in cleanroom environment for quality production.
• Handle on-duty tasks and conduct fundamental alarm troubleshooting; identify root cause and problem-solve critical equipment issues with urgency
• Install and qualify new tool sets on schedule to increase capacity promptly
• Continually improve tool uptime availability, drive defect reduction and enhance hardware capability
• Develop defense and monitoring system to prevent equipment failure or performance lost.
• Analyze complex data sets and derive actionable insights to optimize equipment parameters and controls
• Actively collaborate with equipment suppliers and partners to identify tool deficiencies; develop, evaluate, and validate corrective and preventive solutions

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Job Description

• Industry/ Organization Type: IT / Software
• Position Title: Desktop Support Engineer (L1 / L2)
• Working Location: West (Jurong / Tuas)
• Working Hours: 5 days (Monday to Friday, 8 AM – 5 PM)
• Salary Package: Basic Salary up to $3,300 + AWS + Bonus + Transport Allowance
• Duration: Permanent Role

Key Responsibilities

• Provide first/second level contact and problem resolution for customer issues.
• Work with Third Party Vendors to remediate complex AV issues as needed.
• Provide timely communication on issues status and resolution.
• Maintain ticket updates for all reported incidents.
• Install, upgrade, support and troubleshoot XP, Windows 7, Windows 8.1, Windows 10 and Microsoft Office 2010, Cisco Jabber, another authorized desktop application.
• Should have basic knowledge of Mac operating system to support Apple PC users.
• Install, upgrade, support and troubleshoot for printers, computer hardware.
• Performs general preventative maintenance tasks on computers, laptops, printers.
• Performs remedial repairs on Desktops, laptops, printers and any other authorized peripheral equipment.
• Use diagnostic tools to troubleshoot problems associated with network connectivity, and workstation hardware/software.

APPLY NOW!!!

• Bachelor’s degree or equivalent in Computer Science or related field
• Minimum 1 year of IT experience or equivalent
• Candidates with CompTIA A+, Microsoft Certified Professional (MCP) qualifcations or equivalent would be an added advantage
• Broad experience in IT with basic understanding of Networks, Servers, Audio/Visual, Smart Devices and Telecoms
• Experience with Windows 7-10, Microsoft Active Directory, utilization GPOs, MS Office 365, PC hardware installation and troubleshooting, Enterprise anti-virus solutions or Helpdesk ticketing systems is preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66041 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• An upcoming technology company enhancing AI efficiency for applications.
• Exposure to industrial trends and technology

About Our Client

The client is a semiconductor company specializing in in-memory computing (IMC) technology. They leverage a novel form of memory to create AI accelerators that promise to significantly improve the efficiency and performance of artificial intelligence applications. Their technology is designed to mimic the way the human brain processes information, offering potential advantages in terms of speed, power consumption, and overall performance for AI tasks.

Job Description

Key Responsibilities:

• Develop and implement mixed-signal verification and coverage plans based on design architecture and specifications.
• Design and build verification test benches using industry-standard tools and methodologies.
• Write and execute test cases to verify the functionality, performance, and reliability of mixed-signal circuits.
• Analyze verification results and provide feedback to design teams to resolve issues effectively.
• Collaborate with cross-functional teams, including design and layout, to identify and address design challenges.
• Innovate and develop new verification methodologies, tools, and techniques to improve scalability and efficiency.
• Perform design sign-off for tape-out readiness.

The Successful Applicant

Requirements:

• Bachelor's degree in Electrical Engineering (B.S. EE) with at least 7 years of relevant industry experience or equivalent.
• Strong understanding of analog and mixed-signal circuit design and verification principles.
• Hands-on experience with verification tools and methodologies, including simulators, waveform viewers, and automation techniques.
• Excellent debugging, problem-solving, and analytical skills.
• Proven ability to write detailed test plans, present results, and communicate effectively with cross-functional teams.
• Strong teamwork and communication skills.
• Familiarity with analog behavioral modeling is a plus.

What's on Offer

The client offers candidates the opportunity to work at the forefront of cutting-edge technology, contributing to innovative solutions in analog in-memory computing that are shaping the future of AI. You'll work alongside some of the brightest minds in the industry, tackling complex challenges in IC design and verification. The company fosters a collaborative and dynamic work environment, encouraging innovation and professional growth. Additionally, employees benefit from being part of a fast-growing organization that values creativity, problem-solving, and teamwork, offering competitive compensation, opportunities for career advancement, and the chance to make a tangible impact in the rapidly evolving tech landscape.

Contact

Timothy Huang (Lic No: R1980928/ EA no: 18S9099)

Quote job ref

JN-122024-6626534

Phone number

+65 6416 9863

Michael Page International Pte Ltd | Registration No. 199804751N

Company’s Profile

Our client is an international technology and engineering company that specialises in providing innovative solutions to their esteemed clients. They are dedicated to quality delivery standards with thousands of engineers globally supporting projects. They have an international presence worldwide and are looking out for Senior and Experienced System Engineers to join their team and contribute to their ongoing success.

Location: AMK/Bukit Merah/Science Park

Working hours: Monday to Friday, Standard Office Hours

Responsibilities:

• Provide technical consultancy advice on system configuration and overall design
• Implement system infra expansion design and configure Monitor System Performance
• Assist clients to verify, isolate and provide a temporary work around for the incident/problem logged.
• Resolve system incident/ problem onsite.
• Escalate unsolvable problems and service requests to the System or Software Engineer and report escalations to Operation/ Project Manager.
• Generate relevant administrative records and reports.
• Apply operating system updates, patches, and configuration changes.
• Upkeep and maintain configuration of the system.
• Contacting OEM/Vendor/subcontractor for technical support.

Requirements:

• Min. Diploma / Degree in Computer Science, Computer Engineering or equivalent
• Min. 4-7 years working experience as a System engineer in operations environment.
• Good grasp of technical skills (System) and Infra system design.
• Keen sense of urgency for service performance issues.
• Able to handle demanding service response and recovery turnaround.
• Able to manage daily support tasks to meet stringent SLA requirements.
• Past working experience in Cloud environment is an advantage
• ITIL certification will be an added advantage.
• Good knowledge of Windows Server OS 2019, Active Directory/DNS, HYPER-V and/or VMWARE ESXi

Your recruiter for this job: WhatsApp Celine @ 6421 4966 for a quicker response.

Connect with me on LinkedIn: www.linkedin.com/in/your-recruiter-celine-chan

Celine Chan | R21103433

Talentsis Pte Ltd | EA No: 20C0312

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition. Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging it sector expertise and global track record.

For more information, please visit www.sembcorp.com.

Purpose and Scope:
The Electrical Engineer plays a pivotal role in managing the Electrical aspects of the projects which is crucial to the successful delivery of building projects.

Responsibilities:

• Responsible for projects management, planning and the design of electrical building systems
• Meeting clients & services providers on scope of service and conduct field surveys
• Handling project evaluation, budgets, documentation, technical specification and coordination
• Conduct analysis and selection of systems, evaluate project budgets
• Complete design documents & technical specifications
• Work Coordination with other teams as well as coaching and lead junior staff
• Responsible for making e-submission to authorities for utilities services and related building regulatory submissions

Requirements:

• Degree in Electrical Engineering accredited by Professional Engineer Board, Singapore
• 3 - 8 years of experience in the industry
• Able to work independently with minimal supervision
• Singaporean only

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

Institution-first Mindset – Put the interest of the Group ahead of individual interests.

Collaboration – Deliver through collaborating across markets, businesses, and functions.

Accountability – Hold team and self-accountable to deliver on our commitments.

· Work to obtain excellent business knowledge of the full transaction cycle within a multi-commodity energy trading environment such that they can converse directly with users and other stakeholders with minimal hand-holding from Business Analysts.

· Work within a hybrid internal/consultant/vendor team to deliver a backlog of new features, enhancements, bug fixes and integrations to support the ongoing needs of the LNG and Coal trading businesses. Demonstrate a strong ability to self-organise when required.

· Work collaboratively with the rest of the CLIENT technical team, whilst also demonstrating end-to-end ownership of entire problems where required.

· Apply their strong software engineering skills to:

o Improve the ability to integrate vendor systems together.

o Improve the ability to unit test customisations of vendor systems.

o Improve the structure the source of such customisations.

· Demonstrate a broad set of technical skills including expert database development and administration, .NET/C# development and Powershell Automation/Devops skills.

· It is most important that they have the ability and desire to rapidly pick up a diverse range of technical skills to support challenges as they arise. For example, whilst not a prerequisite for the role, they are likely to be presented with challenges using technologies such as Azure IaaS/PaaS, Power BI, Tableau, SSRS and Crystal Reports.

· Show a highly proactive attitude in learning and immersing themselves in the vendor platforms with the aim of gaining an expert knowledge of how to develop and support extensions and integrations.

· Work with CLIENT IT to evaluate the quality of the existing vendor system customisations and build out a prioritised backlog of improvements. Work to then safely improve the code estate to improve its flexibility and maintainability.

· Support efforts to introduce end-to-end test automation across the application estate.

· Have a strong engineering focus and eye for high quality delivery. They will be expected to deliver high quality software and adhere to modern software engineering practices. They must also be driven to automate everything as this is ingrained in the culture of the team.

· Have strong systems and business analysis skills, particularly in understanding the complexities of existing software systems.

· Be comfortable with agile delivery modes such as Scrum or Kanban but also be flexible to work with whichever delivery approach works best for the problem at hand.

· Provide 3rd line production support.

Skills and Experience required

• Extensive experience with C# .NET
• Very strong understanding of the core language and framework
• Service oriented development (WCF, Web API or ASMX)
• Data access development (ADO.NET, EF or equivalent such as NHibernate)
• Extensive SQL Server database design and development skills (excellent SQL skills assumed). A good working knowledge of database performance optimisation is also required.
• Experience with PowerShell
• Experience with Windows Server infrastructure
• Experience working with agile delivery methodologies such as SCRUM or Kanban.
• Experience with Microsoft-based BI stack, including SSIS, SSRS and Power BI is desirable.
• Experience with Azure PaaS and IaaS and corresponding automation toolkits is desirable.
• Strong academic background, educated to degree level and/or equivalent professional qualification or relevant business experience.
• Highly motivated to continually develop skills and techniques to ensure the best tools are used for the job. Support, resources and technical mentoring will be provided by CLIENT as required.

What you need to do now

If you're interested in this role, click 'apply now'.

EA Reg Number: R21103035

EA License Number: 07C3924 | Company Registration No: 200609504D

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition. Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging it sector expertise and global track record.

For more information, please visit www.sembcorp.com

Purpose and Scope

Manages the overall preparation of mechanical engineering designs, drawings, specifications, schedules, quantity and cost estimates for assigned projects.

Key Roles & Responsibilities

• Main Mechanical Lead for the checking and design of mechanical works from concept to detailed design for projects
• Conversant in local code and authority requirements, ensuring project compliance to the requirements.
• Able to perform analysis and guide engineers to analyze and provide technical advice and solutions when working with stakeholders
• Carry out project management, planning, financial management of project, contract administration, ensure key deadlines are met and team work together effectively
• Liaise with multiple stakeholders for civil & structure, architectural, mechanical and electrical works
• Preparation of tender documents and specifications
• Design management, coordination with contractors, subcontractors and external consultants
• Proactive communication, mentoring and guiding the reporting Engineers and Designers for learning and development
• Ensure the smooth completion of the project within schedule and budget
• Possibly assigned as Assistant Project Manager

Requirements

• Degree in Mechanical Engineering, or equivalent
• More than 6 years in the industry
• Experience in both construction management and design
• Conversant in Engineering analysis design software, BIM software, CFD simulations tools and other mechanical/fire engineering software.
• On track to qualify as a Registered Professional Engineer with PEB Singapore/ Specialized Professional Engineer
• Only Singaporean

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:
Instituition-first Mindset – Put the interest of the Group ahead of individual interests.
Collaboration – Deliver through collaborating across markets, businesses, and functions.
Accountability – Hold team and self-accountable to deliver on our commitments.

About the Opportunity

This role in our Technology squad is embedded in a high caliber, cross functional team that develops and executes our exciting technology strategy to deliver better outcomes for our business and customer.

As a Software Engineer, you will be working with an agile and innovative team and build on your technical expertise with a myriad of technologies, projects and platforms to deliver our business priorities and conquer technical challenges.

What You'll be Doing

• Support the delivery of projects in all aspects of Software Development Life Cycle including system analysis, design, development, quality assurance, UAT, maintenance and ongoing support.
• Contribute to Agile software development lifecycle and be familiar with DevOps processes.
• Develop pragmatic and fit for purpose solutions of high technical quality.
• Work with stakeholders to define and clarify functional requirements and scope to deliver robust cost-effective solutions.
• Maintain software design, engineering processes and quality standards.
• Identifying and addressing bottlenecks in the application or broader infrastructure.
• Assist with ad-hoc duties assigned by Manager.

What We Are Looking for

• Diploma/Degree in Information Technology/Computer Science or related fields.
• 2 years’ experience in full stack software development.
• Required skills: C#, .NET Core framework, Angular.
• Knowledge in DEVOPS, Docker Container, Cloud Implementation, Secured Webservice will have an added advantage.
• Highly collaborative team player, detail-oriented and passionate with technology.
• Ability to thrive in fast-paced, exciting environment.

We regret that only shortlisted applicants will be notified for an interview.

To learn more about our Organization, please visit https://www.alliancehealthcare.com.sg.

Responsibilities:

Incident Management

• Respond to escalated incidents from L1 support, providing timely and effective resolution.
• Diagnose and troubleshoot complex technical problems across various technologies.
• Perform root cause analysis to prevent recurring incidents.
  Document incident resolution steps and maintain knowledge base articles.

Problem Management

• Investigate and resolve underlying problems affecting IT services.
• Proactively identify potential issues and implement preventative measures.
• Collaborate with other teams to address complex problems.

Change Management:

• Implement approved changes to IT systems, following established procedures.
• Ensure changes are implemented with minimal disruption to services.
• Validate successful implementation and document changes.
  

System Monitoring & Maintenance:

• Monitor the health and performance of IT systems.
• Perform routine maintenance tasks to ensure system stability and security.
• Identify and address performance bottlenecks.
  

Technical Expertise:

• Maintain in-depth knowledge of BMC Control-M, AWS cloud services, Windows and VMS operating systems, and security technologies.
• Stay current with industry best practices and emerging technologies.
• Provide technical guidance and mentorship to L1 support engineers.

Qualifications:

• Bachelor's degree in Computer Science, Information Technology, or a related field.
• 3-5 years of experience in IT support, with a focus on AWS, Windows, VMS, and security. BMC Control-M experience will be an added advantage.
• Strong understanding of ITIL framework and service management principles.
• Excellent analytical, problem-solving, and troubleshooting skills.
  Strong communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Relevant certifications (e.g., AWS certification) is a plus.
  

Key Skills:

• BMC Control-M administration and troubleshooting
• AWS cloud services management and support
• Windows and VMS operating system administration
• Security best practices and implementation
• Incident and problem management
• Change management
• System monitoring and maintenance
• Communication and collaboration
  

Sales Engineer (Junior Executive / Senior Executive

• Salary : SGD3,000 - SGD 6,000 + Commission
• Working hours: Monday - Friday 830am to 6pm
  (once a month half Saturday 9am to 12pm)
• Location: Woodlands

Job Responsibilities

• Develop close working relationship with customers championing products.
• Identify niche market segments locally, create market awareness, new product positioning and launch, develop and implement effective marketing programs with the timely support to penetrate, expand and accelerate business growth.
• Understand market trends, competitions, local market culture/customer expectations in order to achieve the organizations’ goals.
• Liaise with management and on various matters – develop jointly common marketing goals/strategies, share marketing information, obtain courses information

Job requirements

• With relevant experience, preferable with Semiconductor industry
• Cert /Nitec / Diploma in engineering background
• Possess own transportation is an added advantage

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Responsibilities

• Collaborate closely with engineers to support Dry Etch process development.
• Analyze test data and set parameters for material and process specifications.
• Lead and coordinate reviews with engineering/scientific teams to ensure processing techniques align with design requirements.
• Innovate and implement new or enhanced process formulations, defining equipment needs and assessing production methods for effectiveness.
• Plan and lead projects focused on introducing new concepts, advanced automation technologies, and improved process strategies.
• Partner with cross-functional engineering teams to identify and resolve integration and process issues.

Requirements:

• Bachelor’s degree in Chemical Engineering, Materials Science Engineering, or a related field.
• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication abilities with good interpersonal interactions.
• Detail-oriented, organized, and a resourceful team contributor.
• Self-driven and capable of working with minimal supervision.
• Project management skills are highly advantageous.
• Comfortable working in a cleanroom environment.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QVRX6Y98

We are seeking a highly skilled Senior Software Developer We're seeking a skilled developer with expertise in Golang, React.js, and TypeScript to join our dynamic team and contribute to significant government projects!

• Join a team that utilizes technology to enhance the lives of Singaporeans.
• Agile development culture to promote continuous learning and growth.
• Competitive remuneration package. Hybrid working arrangement.

Responsibilities:

• Backend Development: Design and implement scalable backend solutions using Golang.
• Frontend Development: Create intuitive user interfaces with React.js and TypeScript.
• Collaboration: Work with cross-functional teams to deliver high-quality software products.
• Agile Practices: Engage in sprint planning, daily standups, and Scrum activities such as code reviews and unit testing.
• DevOps & Deployment: Deploy applications to production, streamline build and release processes, and support ongoing improvements using DevOps principles and automation tools.
• Problem-Solving: Troubleshoot and resolve technical issues efficiently.
• Continuous Improvement: Identify and implement opportunities for process enhancements.

Job Requirements:

• Singaporean only.
• Minimum of 5 years of experience in Software development, with expertise in Golang, ReactJS and NodeJS.
• Prior hands-on experience in handling highly scalable distributed system, configuring automated build, test, and deploy pipelines to streamline the software delivery process.
• Proficient in REST and SOAP API.
• Experience in cloud-native technology, such as AWS (Related certification will be an added advantage.
• Hands-on experience with databases like Postgres, MySQL, and Redis.
• Proficiency with development tools like Visual Code and CI/CD tools (e.g., Git, Jira, Jenkins).
• Working experience in Agile environments or projects (Scrum/Kanban).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781