Job Description

• Oversee ICA (Instrumentation, Control and Automation) related design for process plant (water/wastewater plant, incineration plant, etc.), from concept to implementation, ensuring project is delivered on time, within specifications and meeting industrial standards.
• Ensure ICA designs adhere to relevant safety standards (such as SIL, IEC 61511) and cybersecurity protocols to mitigate operational risks.
• Collaborate with process team to optimize the processes through intelligent control strategies, adaptive algorithms, and data-driven insights.
• Review project specifications, technical proposal/design documentations from the ICA subcontractor/supplier and liaise with project consultant / client for the approval of technical documentations/drawings.
• Support ICA related procurement work, develop cost estimates for ICA products and ICA works, and prepare the schedule for ICA works.
• Oversee project coordination, ensuring project is on schedule and is running smoothly, including handling technical matters at site, managing ICA subcontractor/supplier and working on site with clients and other stakeholders.
• Supervise installation and testing and commissioning of ICA works.
• Perform other duties as assigned by the management.

Requirements

• Minimum 4 years of experience in process plant electrical EPC work with Degree in Electrical , Electronic or Instrumentation Engineering or related Engineering Discipline. For Diploma holder, minimum 6 years of experience is required. For senior position, candidate must have at least 8 years of experience.
• Familiar with relevant code of practice and standards in Singapore
• Experience with Revit/AutoCAD Plant 3D/Bentley is preferred.
• Familiar with Microsoft Office Suite.
• Excellent communication skills in English, both verbal and written.
• Extensive hands-on experience in designing and implementing complex ICA systems in industrial environments.
• In-depth knowledge of control system architectures, such as PLC-based systems.
• Familiar with industry standards and protocols (e.g., OPC-UA, Modbus, HART, Profibus, Ethernet/IP).
• Strong understanding of process control theory, PID tuning, and adaptive control strategies.
• Excellent problem-solving and troubleshooting skills for resolving complex technical issues.
• Strong communication skills to guide technical discussions and collaborate with diverse teams.
• Good technical understanding of water, wastewater or incineration related control system.
• Relevant experience in ICA design and site work for water, wastewater treatment and incineration works.
• Able to work in Tuas area.

Responsibilities

• Collaborate closely with engineers to support Dry Etch process development.
• Analyze test data and set parameters for material and process specifications.
• Lead and coordinate reviews with engineering/scientific teams to ensure processing techniques align with design requirements.
• Innovate and implement new or enhanced process formulations, defining equipment needs and assessing production methods for effectiveness.
• Plan and lead projects focused on introducing new concepts, advanced automation technologies, and improved process strategies.
• Partner with cross-functional engineering teams to identify and resolve integration and process issues.

Requirements:

• Bachelor’s degree in Chemical Engineering, Materials Science Engineering, or a related field.
• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication abilities with good interpersonal interactions.
• Detail-oriented, organized, and a resourceful team contributor.
• Self-driven and capable of working with minimal supervision.
• Project management skills are highly advantageous.
• Comfortable working in a cleanroom environment.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QVRX6Y98

We invite highly motivated, dynamic professionals to join our growing Information Technology Services team.

Information Technology Services is dedicated to creating and delivering value to our business by leveraging on IT technologies. The team is responsible for delivering customer-focused solutions and high-quality IT services internally to enable our business.

The role involves:

• Design, implement, and maintain network and firewall infrastructure across both on-premises and cloud environments, ensuring optimal performance and reliability.
• Ensure compliance with internal standards, policies, guidelines, and information security protocols regarding network infrastructure. Implement best practices and industry standards.
• Drive diagnosis and resolution of complex network and application connectivity issues. Oversee technical support escalations and assist Tier 2 teams when necessary.
• Lead and mentor junior engineers, guiding them in the completion of tasks and helping to develop their problem-solving skills. Collaborate with cross-functional teams to achieve strategic objectives.
• Oversee network infrastructure projects, from planning to implementation, ensuring timely delivery and resource optimization. Engage with external vendors for managed services or new project implementation.
• Maintain detailed documentation of network configurations, policies, and procedures. Conduct semi-annual reviews of these materials to ensure accuracy and compliance.
• Act as the primary point of contact for escalated issues, providing timely updates to senior management and stakeholders. Work closely with the IT leadership to align network strategies with business goals.

⠀

The ideal candidate should possess:

• Degree in Computer Science, Information Technology/Security, or Systems Engineering.
• At least 5 years of relevant experience in cloud environments and network technologies, with 3 years managing projects related to connectivity engineering.
• In-depth knowledge of Cisco and Palo Alto firewall technologies, with a strong understanding of network infrastructure, services (TCP/IP, Routing, DNS), and cloud connectivity (AWS, Azure).
• Proven ability to diagnose and resolve complex network issues efficiently, providing timely and effective solutions.
• Excellent communication skills, with the ability to convey technical information clearly to stakeholders and team members. Demonstrated experience leading technical teams and managing cross-functional collaborations.
• Ability to analyse situations rigorously, logically, and systematically.
• Ability to contribute to continuous improvement of processes and services.
• A proven track record ensuring the proper functioning of operational services.
• Understanding of, and practical experience with, ITIL processes is an advantage.
• Ability to multi-task independently, while also working effectively in a team within a dynamic, fast-paced environment.
• Strong technical experience with Palo Alto security product such as (Prisma Access and Palo Alto Next Generation Firewall).
• Strong technical experience with Palo Alto security products, such as Prisma Access and Palo Alto Next Generation Firewall. Relevant certifications like Palo Alto Prisma Certified Cloud Security Engineer (PCCSE), Palo Alto Networks Certified Network Security Engineer (PCNSE), and optionally Cisco certifications, are highly desirable.

Only shortlisted candidates will be contacted by KPMG Talent Acquisition team, personal data collected will be used for recruitment purposes only.

At KPMG in Singapore we are committed to creating a diverse and inclusive workplace. We believe that diversity of thought, background and experience strengthens relationships and delivers meaningful benefits to our people, our clients and communities. As an equal opportunity employer, all qualified applicants will receive consideration for employment regardless of age, race, gender identity or expression, colour, marital status, religion, sexual orientation, disability, or other non-merit factors. We celebrate the different talents that our people bring and support every staff member in their journey to achieve personal and professional growth. One of the ways we do this is through Take Charge: Flexi-work, our flexible working framework which enables agile and innovative teams to help deliver our business goals.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• Design and synthesis of organic functional materials with persistent luminescence
• Design and synthesis of organic functional materials for theranostic applications
• Design and synthesis of nanomaterials for theranostic applications
• Cellular and bacteria studies to evaluate fluorescent probes
• Responsible for conducting high quality research, writing academic papers and collaboration with other researchers

Job Requirements

• Bachelor degree in Chemistry, Materials, Polymers and Chemical Engineering.
• Good knowledge in synthesis and characterization.
• Have good publication record and relevant research experience.
• Highly motivated and independent, strong problem-solving skills
• Good written and spoken communication
• Open to fixed-term contract

Company’s Profile

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for Junior Construction Engineers to join their team and contribute to their ongoing success.

Location: East

Working hours: Monday to Friday, Standard Office Hours

Responsibilities:

• Be well-informed and understand MEP or construction drawings.
• Discuss with PM/HOD for site problems and technical difficulties.
• Monitor sub-contractors / vendors work, conduct quality checks on their work daily and ensure safety practices are followed.
• Track materials to ensure sufficient materials are readily available for installation.
• Inspect incoming materials and equipment deployed to work sites.
• Go for site inspections with client/main contractors representatives and update progress.
• Keep drafter updated on site changes and as-built drawings.
• Arrange and attain permit to work before execution of site.

Requirements:

• Min. NITEC/ Higher NITEC in Electrical Engineering or other engineering fields.
• Min. 1 year experience in building, construction or engineering industry.
• Electrical engineering background is preferred.
• Possess BCSS certification - Building Construction Supervisor Safety or Supervise Construction Work for WSH is a plus.

Your recruiter for this job: WhatsApp Celine @ 6421 4966 for a quicker response.

Connect with me on LinkedIn: www.linkedin.com/in/your-recruiter-celine-chan

Celine Chan | R21103433

Talentsis Pte Ltd | EA No: 20C0312

Product Integration Engineering team strives to deliver pioneering process capability, best-in-class bits per wafer (Yield) with highest quality and fastest speed through innovation and collaboration with multi-functional team. With the diversity of technology in DRAM/NAND and geography (TD development sites – Boise/Japan, 5 manufacturing sites – US (F6), Taiwan (F11/F16), Japan (F15) and Singapore (F10)), Frontend Central PIE team will be responsible to identify best-known-method holistically, align best-known-method timely and implement improvement systematically across the network. As FE Central PIE Standardization & Metrics Senior Engineer you will be responsible to lead the the team on:

• Drive for alignment and standardization across various fabs on Best-Know-Methods (BKMs)
• Develop Metrics to measure the standardization, sustainability, scalability and synchronization of the BKMs.
• Identify gaps in current programs and use SMART metrics to drive effectiveness and efficiency on program deliverables.
• Transform yield SEAL and SWATs to achieve cPIE missions, improving network resource/talent leverage.
• Constantly drive productivity and eliminate inefficiency / ineffectiveness through metrics and reports automation, drive data to be accurate, accessible and comprehensive.
• Collaborate with various multi-functional teams on yield reports, develop business process to optimize current system with clear roles and responsibility.
• Promotes cPIE teams alignment and collaboration with crtical metrics /metrics definition.
• Collaborate with WFD to standardize network PIE training curriculum, connect with cPIE and network PIE to build training courses.
• Develop human resource strategies to attract, retain and reward talent and effectively deploy them to enhance every individual’s potential
• Engage team members and drive accountability, performance driven culture through clear communication, formal and informal feedback, goals and critical metric
• Drive diversity, equality, and inclusive working environment and foster teamwork and trust in the organization
• Effectively manage team’s internal and worldwide meeting structure. Ensure meetings are efficient, effective and targeted to achieve required outcomes.
• Maintain knowledge of equipment and materials safety concerns. Take a proactive approach to safety, and apply corporate and site safety resources for partner concern issues as appropriate.
• Maintain a strong and open relationship with peer group and managers in other functional areas within CPIE and outside organizations such as Fab, FE PMO/SIC/OCT and Global Quality.
• Travel to Micron sites as necessary for face to face collaboration.

Requirements:

• Bachelor’s Degree in Engineering and related field of study
• 2 years experience in engineering field
• Applicants must have a proven ability to collaborate globally and influence by indirect leadership to drive resourcing to critical projects across Micron
• Applicants must have a proven capability in dealing with complexity and an ability to use resources effectively to bring clarity to required actions
• Applicants must hold a record of performance excellence for current area of responsibility; and are recognized as having demonstrated successful leadership characteristics both in present and past jobs
• Applicants must have demonstrated the ability to solve problems across multi-functional groups, both within and outside their department/Site

Job Description:

• Review technical specifications/drawings from client;
• Coordinate internal and external engineering activities and the interdisciplinary interfaces to ensure that the project objectives and needs are met and meet project schedules;
• Develop cost estimates for equipment and works.
• Prepare technical submissions and liaise with client/project consultant for submission approval;
• Ensure technical requirements defined in the contract are properly incorporated in the project deliverables;
• Handle and resolve all site technical relating matters.
• Support on the testing and commissioning work.
• Collaborate with internal stakeholders, clients, consultants, vendors and contractors.
• Assist the Managers in engineering co-ordinations and in administrative duties (management of sub-contractors / vendors, etc.);
• Perform other Duties assigned by the direct supervisor

Requirement

• Bachelor Degree in Electrical / Mechanical / Chemical / Civil/ Building Structure/ Environmental Engineering
• Team player with good interpersonal skills.
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Proficient in Microsoft Office

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gcwKsApK

• Lead digital transformation through AI
• Engagement with senior business stakeholders

About the company

Our Client is one of the most established companies within their industry. They have a well-established presence of more than 15 years with a global footprint of more than 5 countries. With aggressive plan in investing in IT, they are now looking hire their AI Engineer to be based here in Singapore.

About the job

Your role involves:

• Collaborate with cross-functional teams to identify problems and deliver AI-powered solutions.
• Work with large datasets, preprocess data, and select appropriate algorithms for training.
• Continuously improve models by iterating, fine-tuning, and implementing state-of-the-art techniques.
• Contribute to the design and architecture of AI platforms and pipelines.
• Research and integrate new AI methodologies, tools, and frameworks to stay ahead in the field.
• Implement and test models, ensuring high quality and performance.
• Communicate complex AI concepts and results to non-technical stakeholders.
• Engaging with business stakeholders, translate business and technical requirements into data transformation jobs and design data models that powers data lake solutions to support AI/ML initiatives.

Skills and experience required

As a successful applicant, you will have at least 2 years of experience in AI/Machine learning. Exposure to regression models / decision tree regression and Gen A will be of added advantage.

Whats on offer

This is an excellent opportunity to led AI transformation with a leading company.

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gcwKsApK (EA: 94C3609/ R1219669)

Tasks:

● Develop and implement SLAM algorithms for accurate simultaneous localization and

mapping of autonomous robots in outdoor environments..

● Integrate sensor data from various sources (lidar, cameras, IMUs, wheel encoders) to

improve SLAM performance and accuracy.

● Utilize calibration techniques to ensure accurate sensor data fusion for SLAM.

● Collaborate with other team members to ensure overall system integration and

functionality.

Education:

● A bachelor's or master's degree in Robotics, Computer Science, Electrical

Engineering, or a related field is typically required.

Technical Skills:

● SLAM algorithms: Proficiency in developing and implementing SLAM

techniques such as EKF-SLAM, Graph SLAM, or FastSLAM.

● Sensor fusion: Experience with integrating data from sensors such as lidar,

cameras, IMUs, and wheel encoders for accurate localization and mapping.

● Robotics: In-depth understanding of robotic systems, kinematics, dynamics,

and control theory.

● Programming languages: Proficiency in languages commonly used in

robotics, such as C++, Python, or ROS (Robot Operating System).

● Simulation tools: Experience with robotic simulation frameworks like Gazebo

or V-REP.

● Problem-solving and analytical skills: Strong analytical and problem-solving

abilities are vital for identifying issues, debugging complex systems, and

proposing effective solutions.

● Communication and teamwork: Excellent verbal and written communication

skills to collaborate with cross-functional teams, document technical

specifications, and present findings effectively.

Experience:

● SLAM implementation: Prior experience in developing SLAM algorithms and

systems for autonomous robots.

● Sensor integration: Knowledge of integrating sensor data from various

sources to improve SLAM performance.

● ROS: Practical experience with the Robot Operating System (ROS) for robotic

software development and integration.

Responsibilities

• Ensuring all sub-contractors comply fully with the relevant recommendations of LTA M&W requirements
• Preparing and submitting the Weekly & Monthly Quality reports.
• Follow up with conformity certificate, calibration certificate and plant calibration certificate from other agency.
• Maintaining the RIN Register and follow up with QPS for closing.
• Review daily inspection report and issuance of observation or NCR (Non Conformity Report) according to concerned department.
• To arrange QPS for inspection including the reinforcement cages, sitting out, guide wall, slurry quality (powder moisture, slurry density, viscosity & gel strength), final depth pf trench,trench profile check (koden alignment check), stop end, inserts, concrete slump, temperature, casting duration, cut-off level, ground level, backfilling (LSS) and lean concrete.
• To be physically present during Asphalt pavement work for Road diversion work.
• Study Shop drawing and liaise with design department on the design issue that may cause difficulty in production.
• To conduct mould inspection for every new mould and mould in use.
• Materials ordering
• To arrange production based on Daily Production Planning from planning department.
• Responsible for achieving the daily planned volume/productivity.
• To prep our inspection together with production supervisor and RTO

Requirements

• Degree in any Engineering Discipline
• Minimum 5 years experience in QA/QC works in railway construction, with at least 1 year LTA MRT experience.
• Experience in structural steel works or precast RC works
• Good interpersonal skills and communication skills
• Open to 6D work week with long working hours to meet tight project deadline.

Job Description

• Industry/ Organization Type: Manufacturing/ Production (Precision Engineering)
• Position Title: Procurement Engineer
• Working Location: Kaki Bukit
• Working Hours: 5 days (Mon – Fri, 8am – 5.30pm)
• Salary Package: Up to $4,500 + AWS
• Duration: Permanent

Key Responsibilities

• Report to Operations Manager.
• Obtain quotations and purchase raw materials, components, and assign secondary processes to subcontractors.
• Update approved machining subcontractor quotations in the system.
• Issue and manage Work Orders and Purchase Orders.
• Source materials, components, and plating for cost reduction.
• Perform evaluations for company purchases and assist with assigned duties.
• Collaborate with the group sourcing team on procurement evaluations.
• Develop and manage the Supply Chain Management plan.

APPLY NOW!!!

• At least Diploma in Mechanical Engineering with 1 year of related working experience. Preferably from the Manufacturing industry.
• Proficient in Microsoft Office is a must.
• Experience with CRM tools (such as Salesforce) would be beneficial.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71172 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: QA Engineer / Quality Assurance Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that ISO13485 and FDA 21 CFR Part 820 systems are adequately maintained, and continuous improvements are implemented
• Coordinate with various functions to ensure awareness and understanding of the Quality Management System.
• Plan and coordinate gap analysis exercises and provide advice on bridging the gap
• Manage and oversee quality audits by plan and ensure quality audits findings and recommendations are rectified and implemented
• Apprise management of quality audit findings and corrective actions taken
• Ensure that the procedures and processes prescribed by the Quality Management System are in place and implemented per requirement
• Review the Quality Management System periodically to assess continued suitability and areas of possible improvement
• Arrange for ISO13485, ISO14971 and FDA 21 CFR Part 820 awareness training and further refresher training as needed
• Coordinate and plan work of external audit such as Customer, ISO certification and Regulatory bodies
• Ensure that systems and procedures are in compliance with ISO13485, ISO14971, FDA 21CFR Part 820, and GDP requirements
• Mentor / supervise as assigned and ensure timely and accurate completion of quality projects
• Support Plant wide audit/ inspection activities and special projects, as assigned
• Able to travel for suppliers/customers visits
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Quality Management or Electronics Engineering
• At least 3 years of working experience in Quality Management Systems, and in a manufacturing environment
• Excellent hands-on knowledge of Quality Management Systems primarily in ISO 13485 and FDA 21 CFR Part 820
• Lead, mentor and facilitate problem-solving and quality improvements
• Establish controls system required in ISO13485 & FDA registered facility
• Strong communication and interpersonal skills
• FDA Inspection experience preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65191 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

- Conduct routine inspection and evaluates their condition and recommend proper execution during work activities.

- Prepare project schedule and presentation of project.

- Lead the kick of meeting.

- Resposible of project management and quality control.

- Prepare & review Civil and Structural drawing.

- Prepare Quantity Take-off of Civil and Structural Materials for BOQ.

- Prepare bid documents for Civil and Structural Project.

- Witness Dimensional Checking during erection & construction.

- Control and check all fabrication activities.

- Maintain welder performances and welders repair.

- Conduct final walk through inspection and monitor rectification of final punch list item. Safety aspects on construction is defined in safety assurance, procedure and thoroughly implemented.

Requirement:

- Minimum 4 years Experiences in Civil and Structural sector in SG process plant.

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Lead development of new process to recycle and reuse metal scraps.
• Research and develop process of upcycling metal scraps (titanium/aluminum alloy).
• Research recycling of 3DP metal powders and reduction of raw material cost.
• Provide development plan and risk mitigation for projects to management.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new material or new technology development.

Requirements:

• Masters / PhD in Materials Science, Metal Material Engineering or Analytical Chemistry.
• 2 years of relevant R&D working experience preferred.
• Have experience in metal material development and qualification in either mold, fixture or product.
• Possess knowledge in material characterization and metal powder production process.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

Leading provider of semiconductor equipment

Senior Design Engineer

Responsibilities:

• Manage mechanical design team

• Ensure mechanical design process meets schedule

• Conduct transforming, conceptualization and design review session with internal design team

• Continuous review, development, enhance and improve company products

• Provide technical support and solutions to products inquiry

Requirements:

• Degree in Mechanical, Mechatronics Engineering or equivalent

• Minimum 8 years of design experience in factory automation design

• Minimum 3 years in design supervisor experience

• Experience in semiconductor equipment handler will be an added advantage

• Analytical minded with strong organizational skills

• Proficient in using 3D software

• Able to effectively, interact with a variety of personnel at all organizational level and customers

Interested applicants, please email detailed updated resume in MICROSOFT WORD format and indicating your current salary and expected salary to:

[email protected]

David Lim

Principal Consultant/Manager

Registration No.: R1102027

[email protected]

FA Search Pte Ltd (lic no. 07C4794)

Imagine how your ideas and expertise can change a patient’s life. Our Global Supply Chain team plays a central part in ensuring our products are delivered to patients with cardiovascular disease and critical care needs. You’ll partner cross-functionally with manufacturing operations and sales teams, delivering thoughtful solutions to complex challenges all while developing your knowledge of the medical device industry. Whether your work includes strategic inventory planning, labeling, warehouse management, material handling, or any of our other supply chain opportunities, you will be making a meaningful contribution to our team and to patients all over the world.

How you will make an impact:

• Develop protocols for, and implement, package design, packaging process validation, and package shelf life testing, as well as driving new packaging technologies and strategies to improve time to market and advance the technology of package engineering at Edwards
• Develop plans for moderately complex projects working closely with cross-functional team members and outside suppliers
• Validate packaging equipment and packaging manufacturing processes to determine appropriate sourcing, purchasing, installation planning and specifications
Identify and develop operations packaging projects (e.g., cost improvements, qualify new suppliers and product transfers)
• Design and optimize packaging for moderately complex projects, including new product launches and existing products throughout all stages of product development from concept to launch, including clinical trials, global and limited market releases, as well as key operations initiatives

• Other incidental duties assigned by Leadership

What you'll need (Required):
• Bachelor's Degree in Engineering or Scientific field

What else we look for (Preferred):

• Good computer skills in usage of MS Office Suite; CAD experience preferred
• Good documentation, communication (e.g., written and verbal) and interpersonal relationship skills including consultative and relationship management skills
• Basic understanding of statistical techniques
• Previous experience working with lab/industrial equipment required
• Solid understanding and knowledge of principles, theories, and concepts relevant to Engineering
• Solid problem-solving, organizational, analytical and critical thinking skills
• Solid understanding of processes and equipment used in assigned work
• Knowledge of and adherence to Edwards Environmental Health and Safety and Quality guidelines as they relate to department clean room medical device manufacturing
• Strict attention to detail
• Ability to interact professionally with all organizational levels
• Ability to manage competing priorities in a fast paced environment
• Must be able to work in a team environment, including the ability to manage vendors and project stakeholders
• Ability to build productive internal/external working relationships
• Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control

Job Description

• Industry / Organization Type: Manufacturing
• Position Title: QC Engineer / Quality Control Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Work with Process Engineer & Engineering team on QC requirement
• Document inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

APPLY NOW!!!

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirements in PCB Assembly, quality requirements of plastic molding, die casting, extrusion, metal stamping and machining parts
• Able to converse with overseas suppliers

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65192 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Description

• Industry/ Organization Type: Manufacturing/Construction Machinery
• Position Title: Service Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8.15 am – 5.15 pm
• Salary Package: Up to $4,000 + AWS + Meal Allowance + Company Transportation/Transport Allowance + OT
• Duration: Permanent

Key Responsibilities

• Conduct product delivery training for distributors and customers.
• Provide diagnosis guidance and analysis of fault found to Distributor / End-user, remotely via emails and/or calls.
• Carry out field services at sites in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team in locating correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.

APPLY NOW!!!

• Minimum Diploma in Mechanical/Mechatronics Engineering or relevant studies.
• With at least 2 years of relevant working experience in construction machinery industry.
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram.
• Process valid Class 3 Driving License.
• Comfortable with travelling internationally within Asia (Entitled to travelling allowance).

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65794 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description:

- Conduct routine inspection and evaluates their condition and recommend proper execution during work activities.

- Prepare project schedule and presentation of project.

- Lead the kick of meeting.

- Responsible of project management and quality control.

- Prepare & review Civil and Structural drawing.

- Prepare Quantity Take-off of Civil and Structural Materials for BOQ.

- Prepare bid documents for Civil and Structural Project.

- Witness Dimensional Checking during erection & construction.

- Control and check all fabrication activities.

- Maintain welder performances and welders repair.

- Conduct final walk through inspection and monitor rectification of final punch list item. Safety aspects on construction is defined in safety assurance, procedure and thoroughly implemented.

Requirement:

- Minimum 2-4 years Experiences in Civil and Structural sector process plant.

Job Description:

• Responsible for electrical control, electrical schematic design, electrical cabinet wiring, standard component selection, and development of related PLC programs.
• Accurately release BOMs, electrical schematics, and layouts, and estimate labor hours.
• Develop work instructions for electrical cabinet assembly and implement process improvements.
• Complete other tasks assigned by the leadership.

Job Requirements:

• Diploma or higher, CET-4 or above in English, with a background in Mechatronics, Electrical Automation, or related fields.
• Familiarity with electrical cabinet development processes, working principles, and knowledge of electrical automation.
• Proficiency in software such as AutoCAD and EPLAN.
• Strong communication and coordination skills, with a responsible, meticulous work ethic, a spirit of innovation, and excellent teamwork abilities.
• 
  
• Diploma or higher, CET-4 or above in English, with a background in Mechatronics, Electrical Automation, or related fields.
• Familiarity with electrical cabinet development processes, working principles, and knowledge of electrical automation.
• Proficiency in software such as AutoCAD and EPLAN.
• Strong communication and coordination skills, with a responsible, meticulous work ethic, a spirit of innovation, and excellent teamwork abilities.

1. Diploma in mechanical engineering, three years or more of equipment hoisting, pressure pipeline installation, painting engineering, thermal insulation engineering, welding related work experience.

2. Skilled use of MS office

3. Need to write MSRA, preferably trained in RA writing

4. Sort out the workflow

Senior/Design Engineer (C&S) (A1 main con, iconic building project)

Our client is a leading reputable A1 main contractor renowned for their impressive portfolio of iconic mixed development, residential and industrial building projects across Singapore. They’re embarking on an exciting new institutional building project in the CBD and are now looking for a Senior/C&S Design Engineer to join them during an exciting time in their development.

Job Responsibilities

• Provide technical expertise in the design and coordination of the civil and structural aspects of our construction projects.
• Work closely with project teams to ensure that all structural elements are designed to meet project specifications, regulations, and quality standards.
• Coordinate and liaise with relevant stakeholders to ensure the design complies with all requirement
• Prepare and present technical engineering reports, calculations, drawings, and specifications for project designs.
• Participate in the value engineering process to ensure cost-effective and efficient design solutions.

Requirements

• Degree in Civil/Structural Engineering, Construction Management, or related field
• Minimum 5 years of relevant building project/steel structures experience
• Possess knowledge of preparing construction sequencing drawings
• Experienced in resolving site issues too

Location: Central

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

• Position title: Sales Engineer
• Location: Loyang Way, Loyang Industrial Estate
• Working Days: Mon - Fri
• Working hours: 830 a.m. to 530p.m.
• Salary: $3,000 - $4,500 (depends on experience)

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Position Overview:
We are seeking a motivated and experienced Sales Engineer to join our team. The Sales Engineer will play a critical role in driving sales and delivering technical solutions that meet our clients’ needs. This role requires a blend of technical expertise and sales acumen, as you will work closely with customers to understand their requirements, present tailored solutions, and support the sales process from inception through to implementation.

Key Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up to date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Requirements

• Education: Bachelor’s degree in engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Experience: Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel: Required to support regional customers in Southeast Asia (30-40%).

Project Sales Engineer

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Assistant Service Engineer/ Service Engineer
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $3800 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair & maintenance of commercial cleaning equipment; e.g. road sweepers, ride-on auto-scrubbers etc.
• Must be able to perform troubleshooting on various electrical circuitry.
• Able to lead a team of technicians to provide excellent service support.
• All other assigned duties.

APPLY NOW!!!

• Minimum Diploma (Electrical Engineering) with expertise in AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Minimum 1 year of experience in customer support and in repairing heavy industrial equipment.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65054 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641