Job Description:

• Support and assist the SRE / RE / RA
• Undertake all or part of the duties and responsibilities of the SRE / RE / RA as instructed by the appointed project manager in consultation with the project consultants if no SRE / RE / RA are appointed for the project
• Review all project drawings and specifications, and raise any discrepancies and/or possible problems before construction work commence on site and progressively throughout the entire course of the project
• Supervise the construction and related works, maintain quality control and ensure that the works are carried out in accordance with the project specifications, drawings, approved sketches, product or system specifications, contractor’s method statements, installation and working procedures, and site instructions, supervising Qualified Persons and project consultants
• Ensure that the contractors carry out their work in compliance with Building Control Act and Regulations, Codes of Practices and requirements of building authorities and government agencies, such as BCA, LTA, NEA, NParks, PUB, SCDF and public utility agencies/service providers such as SPPG, SingTel, StarHub, etc
• Report to the supervising Qualified Persons any work that are not constructed according to the building approved plans, project drawings including shop drawings
• Report to the appointed project manager and/or project consultants any work that are not constructed according to the specifications and drawings
• Liaise with the supervising Qualified Persons and their engineers/architects / specialists on the review and approval of revised designs, amended drawings, specialist drawings, sketches, etc
• Assist in the review of contractor’s method statements and working procedures, and to ensure that they are followed on site
• Monitor contractors’ schedules, day works, site progress, etc
• Verify progress payment claims, all other claims and reports submitted by the contractors
• Check shop and construction drawings, samples, etc. submitted by contractors and their sub-contractors / suppliers / vendors and to report any discrepancies between these and the project drawings and specifications
• Preparation and submission of daily progress report

Job Requirements:

• Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post-Graduate Diploma/Professional Degree in relevant field.
• Must be registered as Resident Technical Officer (RTO) with BCA/IES/ACES
• Shall have a certificate in Building Construction Supervisors Safety (BCSS) Course
• Possess relevant working experience in the related field is required for this position

Senior Software Developer (Banking Applications)

Position Overview:
We are seeking a highly skilled and experienced Senior Software Developerwith expertise in VB.NET/.NET and database technologies such as MSSQL and Oracle. The ideal candidate will have a proven track record of developing banking applications and a solid understanding of the banking domain. This position requires at least 10+ years of overall development experience and familiarity with working in Singapore's dynamic tech ecosystem.

Key Responsibilities:

• Design, develop, and maintain robust, scalable, and secure banking applications using VB.NET and/or .NET frameworks.
• Develop and optimize database structures, queries, and performance on MSSQL and/or Oracle platforms.
• Collaborate with cross-functional teams to gather and understand requirements, ensuring alignment with business objectives.
• Ensure software meets high-quality standards through rigorous testing, debugging, and performance tuning.
• Engage in code reviews and participate in the software development lifecycle from requirements to deployment.
• Provide support for deployed applications, troubleshoot issues, and implement enhancements based on user feedback.
• Stay updated on industry trends, emerging technologies, and regulatory changes in the banking domain.

Required Qualifications and Skills:

• Technical Expertise:
  • Hands-on experience with VB.NET and/or .NET technologies for at least 5 years.
  • Proficiency in database design and development using MSSQL and/or Oracle.
• Experience:
  • 10+ years of overall development experience in software development.
  • 5+ years of experience in banking application development, with a solid understanding of financial workflows, compliance, and security standards.
• Domain Knowledge:
  • Prior work experience in Singapore, with a good understanding of its technology and banking ecosystem.

Education and Certifications:

• Bachelor's degree in Computer Science, Information Technology, or a related field.

Professional certifications in .NET, MSSQL/Oracle, or banking technologies are a plus

Technical Engineer

Key Responsibilities

1. System Design and Development

· Design and implement solutions involving barcode scanners, RFID readers, and card-based access control systems.

· Develop integration plans for speedgates with these technologies to ensure seamless functionality.

· Evaluate and recommend appropriate hardware and software solutions to meet project requirements.

· Create technical documentation, including schematics, workflows, and system architecture.

2. Installation and Configuration

· Configure and install barcode scanners, RFID readers, and access control card systems.

· Oversee the physical installation of speedgates and their associated components.

· Calibrate devices for optimal performance and accuracy.

· Ensure compliance with safety and security standards during installation.

3. Integration

· Integrate barcode, RFID, and card systems with speedgates and other access control systems.

· Implement software and firmware updates for all components.

· Develop APIs or use existing interfaces to connect devices with management software or enterprise systems.

4. Troubleshooting and Maintenance

· Perform diagnostics on malfunctioning devices or systems to identify and resolve issues.

· Conduct regular maintenance on barcode scanners, RFID readers, card systems, and speedgates.

· Monitor system performance and propose upgrades or replacements when needed.

· Respond to technical support queries and provide on-site or remote assistance.

5. Testing and Quality Assurance

· Conduct tests to validate the accuracy and reliability of barcode and RFID readings.

· Ensure the synchronization of all integrated systems, including speedgates.

· Perform stress testing to confirm the system's ability to handle high traffic and loads.

6. Project Management and Collaboration

· Collaborate with architects, developers, and security teams to deliver integrated solutions.

· Manage timelines, budgets, and deliverables for related projects.

· Train end-users and provide documentation for system operation and troubleshooting.

7. Innovation and Research

· Stay updated on emerging technologies in barcodes, RFID, and access control systems.

· Explore opportunities for automation and efficiency improvements using these technologies.

· Recommend innovative solutions that enhance operational efficiency and user experience.

---

Required Skills

· Strong understanding of barcode technologies (e.g., QR codes, linear codes) and RFID systems (active, passive tags).

· Proficiency in card system technologies, such as smart cards and magnetic stripe cards.

· Knowledge of speedgate mechanics and automation.

· Programming skills for system integration (e.g., Python, C++, Java, or relevant API languages).

· Familiarity with networking and data communication protocols (TCP/IP, Wi-Fi, NFC, etc.).

· Hands-on experience with diagnostic tools and troubleshooting.

Responsibilities:

• Assist Project Manager in site supervision and management.
• Responsible for planning, scheduling, forecasting, conducting and coordinating the technical and management aspects of projects.
• Controlling the cost of the materials and labour.
• Coordination and checking of engineering deliverables.
• Attend site meeting, inspection, and monitoring of project progress with Main Con and Sub-cons.
• Liaising and coordinating with all parties involved in the projects such as consultants, main contractors, sub-contractors, suppliers, local authorities, environmental agencies, and federal entities to ensure successfully implementation of the project.
• To manage daily operation of the project execution.
• Solving construction problems as soundly as possible.
• Acting as the quality control and assurance to ensure that the project objectives are met.
• To ensure that project paper works are properly kept and up to date.
• Ensure safe work procedures are implemented to control risk.
• Familiar with the relevant legal requirement.
• Other ad-hoc duties as assigned

Job Requirements:

• Degree in Civil Engineering recognised by the Professional Engineers (PE) Board or qualifications accepted by the Commissioner of Building Control for registration as Resident Engineer.
• At least five (5) years relevant experience including in planning the construction of vehicular structures and roads involving stage diversions.
• Self-motivated, dynamic and goal orientated candidate
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Able to start work within short period

1) Devising and establishing software systems to support the implementation of strategies set by company’s management .

2) Development and maintenance of all our internal software systems and database.

3) Offer training to the company staff on the software and technical hardware usage.

4) Liaising with external vendors regarding network related matters and website hosting.

5) Staff support and maintaining hardware systems (CCTV, PCS/Laptops/Printers etc.) .

6) Server Maintenance & configurations.

7) Internet /Router Maintenance Requirements.

8) Bachelor’s Degree in Computer Science or equivalent 2+ yrs Experience in Programming Language Asp.Net C#, Sql Server 2012 or above Well verse in getting Requirements, Programming & Testing accordingly.

Purpose: Responsible for supervising staff, ensuring health and safety regulations at work are followed, making sure adequate training has been provided to the workers in the usage of equipment, and identifying deficiencies to be improved in production.

Key Area of Responsibilities:

• Supervising the man and assembly process, ensuring quality work is done safely and efficiently.
• Organize and motivate the mini-companies to perform daily production activities.
• Draw up training, and job rotation plans to develop manpower to be more flexible and competent and stimulate continuous productivity improvement.
• Liaising with other Engineers to develop plans that improve productivity, in terms of costs and manpower required.
• Support engineering/manufacturing teams, draw up safety protocols, report issues to the manager, and develop strategies to improve efficiency and profit.
• Take part in quality meetings with QA and process, conduct production CAB meetings, and ensure corrective actions are carried out.
• Conduct daily supervisor and production meetings to achieve delivery reliability.
• Record and report on the department’s activities and production results regularly in each productivity review meeting.
• Manage consumables and non-capitalized equipment spending.
• Maintain and ensure 5S housekeeping on the shop floor.

Qualification & Experiences:

• Diploma/bachelor’s in engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering).
• At least 3 years of experience as an engineer in the manufacturing assembly environment.
• Good communication skills to perform mentoring and coaching to production staff.
• Good knowledge in problem-solving methodology.
• Ensure the safety standards and process safety management is duly followed.

Job Responsibilities:

- Prepare and develop design and technical specifications of projects

- Prepare tender documents for bidding and submissions to authorities (Risk assessments, Method statements etc.)

- Overall project planning, scheduling, monitoring and updating to meet project completion targets

- Conduct site checks on repair works in building structures

- Coordinate and monitor work progress at site (periodical site inspection and attending meetings)

Job Requirements:

- Degree in civil engineering discipline preferably recognized by PEB

- At least 8 years of working experience in related field

Job Description:

- Responsible for the supervision of Electrical Equipment testing and commissioning at site, review and

submission of site acceptance test reports.

- Review Single Line Diagrams and Electrical Schematic Drawings.

- Assist in Electrical Equipment Installation Inspections.

- Attend to Site Activities and Meetings involving clients and contractors.

- To undertake tasks / assignments as and when directed by the Project Lead.

Job Requirements:

- Candidate must possess at least Diploma in Electrical Engineering.

- At least 2 Years of local working experience in the related field is required for this position.

- Possess initiative and capable of multi-tasking in a fast paced environment.

- Experience in MV / LV Electrical Equipment (Site Installation, Testing and Commmissioning,

Maintenance Testing) will be an added advantage.

Responsibilities:

• To perform engineer’s role on method statement, implement cost & time efficiency on operation
• To checking plans, drawings and quantities for accuracy of calculations
• To supervise site works compliances and inspection requirement
• To carry out daily site supervision, coordination and quality assurance of all trades implementation on site
• To work closely with sub-contractors on project progress and ensure timely work arrangements
• To scheduling materials and equipment purchases and deliveries
• To liaise with consultant and carry out site inspection
• Attend all site's meeting on work progression
• To prepare monthly meeting progression report

Requirements:

• Possess Degree in Civil Engineering
• 3 years working experience in Construction
• Able to work independently
• Have positive attitude

Job Description

· Assist in project planning and scheduling.

· Review engineering designs, drawings, and specifications to ensure compliance to project requirements and industry standards.

· Assist construction manager & quantity surveyor in project progress claim.

· Coordinate with project stakeholders, contractors and suppliers.

· Track project progress, identify risks, and implement mitigation strategies.

· Provide technical support and resolve engineering issues.

· Any ad-hoc duties assigned.

Requirements

· Possess excellent interpersonal skills and communication skills and a leader to influence.

· Efficient, Good Analytical Skills and Able to work independently.

· Diploma/Degree/Master in Civil & Engineering or equivalent, recognized universities under the BCA, possess quantity surveying skills is a plus.

· Experience in a marine construction company is favorable, however, fresh graduates may apply.

· Proficient in Microsoft Office, MS Project and AutoCad.

· Able to start work immediately.

· Singaporeans / Singapore PR / Malaysians or those holding relevant residence status may apply.

Job Scope:

• Supervise site operations and daily activities on construction or engineering sites
• Manage project timelines to ensure the project stays on schedule
• Coordinate with contractors, subcontractors, and suppliers for timely delivery of materials and services
• Ensure quality control by conducting site inspections and monitoring work to meet design specifications
• Monitor and enforce safety standards to comply with health and safety regulations
• Manage resources, including manpower, equipment, and materials for project efficiency
• Provide technical support and troubleshoot issues as they arise on-site
• Review plans, blueprints, and technical drawings, offering feedback and solutions
• Prepare daily and weekly progress reports for senior engineers or project managers
• Maintain accurate project documentation, including records of site activities and materials used
• Assist in cost control by monitoring project expenses and tracking material usage
• Supervise the installation of systems or equipment as required
• Collaborate with design engineers, architects, and other stakeholders to ensure project alignment with design
• Conduct and participate in site meetings to discuss progress, challenges, and next steps

Requirements:

• Degree in Civil Engineering or equivalent
• 3-5 years of relevant experience, with at least 2-3 years in LTA underground or MRT projects
• Experienced in managing underground projects, including D-wall, borepiling, and other structural works in Singapore.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 5 years’ experience or Diploma holders with 8 years’

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

• Well Established Company
• Basic $4000 - $5500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 5.30pm
• DCS | PLC | SCADA

Job Responsibilities:

• Understand / develop technical design specification / requirements and associated document relevant to project
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and System Commissioning on site
• Product test document and training material
• Conduct training to customer
• Provide technical support to sales and maintenance team
• Others ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent with 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Technical Sales Engineer/ Product Sales Engineer

Location: Bukit Batok

Working Days: 5 Days

Working hours : 9am - 6pm

Salary : SGD2,200-3,500 (not inclusive of transport allowance, bonus/commission)

Job Responsibilities:

• Develop a thorough understanding of our complete range of product
• Responsible for preparing quotations, proposal according to customers' requirements
• Plan sales visits, customer calls
• Service existing clients and proactively identify and develop new customers and markets
• Conduct product training and presentation to customers
• Follow up on sales lead, sales orders and deliveries
• Provide application/product support to customers and internal sales team
• Provide post sale and presale application and sales support by analyzing and recommending solutions to meet customer’s needs.
• Using technical skills to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products.
• Industry: Electrical & Electronics

Requirement:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic/
• Passion for automation, with creative and adaptive approaches

Skills

• PLC programmable logic controller programming, touch panel, Control And Automation

https://wa.me/6596420989

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

• Well Established Company
• Basic $ 2700 to $ 3500 + AWS + VB
• No Experience Welcome – Training will be provided
• Working Location: Tuas, Singapore (Company Transport Provided)
• Normal Working Hours

Job Responsibilities:

• Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out incoming process inspection
• Authorise the rejection of parts if found unsatisfactory
• Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers
• Perform factory routine test and check of switchboards completed in the workshop
• Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints
• Maintain good housekeeping in the QA department
• Observe and adhere to safety rules during the performance of every task
• Initiate, recommend, or provide solutions to problem detected
• Control further processing and delivery of non-Conforming products until the deficiency has been corrected
• Follow the procedures of Quality Management System for effective implementation and control
• Carry out other responsibilities as and when assigned by the superiors

Requirements:

• Diploma in Electrical Engineering or equivalent
• Training will be provided for candidate without / with less experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Employer Background:
The employer is a prominent player in the precision engineering sector, specializing in the manufacturing of high-quality metal components. They are known for their advanced engineering capabilities and commitment to delivering tailored solutions to meet customer needs.

Overview:
Join a dedicated team as a Design Engineer, where you will contribute to the design and development of precision engineering solutions, focusing on automation systems and custom fixtures.

• Position: Design Engineer
• Industry: Precision Engineering
• Department: Design and Engineering
• Employment Type: Full-Time
• Working Days & Hours: 5 Days, Monday to Friday, 9:00 AM to 6:10 PM
• Work Location: Within Central Location at Macpherson
• Salary Range: Up to $4,500 Monthly Basic (Based on Relevant Experience)

Job Responsibilities:

• Create schematic diagrams and manufacturing drawings for automation systems and jigs & fixtures, utilizing AutoCAD and/or SolidWorks.
• Collaborate closely with engineers and coordinate with customers to ensure that manufacturing drawings meet specifications and requirements.
• Assist in the design and engineering process to enhance manufacturing efficiency and product quality.

Requirements:

• Experience: Minimum 1 year of relevant working experience, preferably in the manufacturing automation or jig & fixture industry. Entry-level candidates are welcome to apply; training will be provided.
• Education: Minimum educational qualification: Nitec / Higher Nitec / Diploma / Degree in Engineering (Any Major).

Recruit Lync Pte Ltd | EA License Number: 22C1000
Poon Weng Teik (Wilson) | EA Personnel License: R1657737

Job Description

- Manage the daily operation and

maintenance of the Engine Department.

- Manages & verifies efficiency of SMS

(engine department), including conducting

familiarization and training of engine

personnel.

- Plans and prepares maintenance

schedule for the Engine Department.

- Minimum 3 years of experience on board

as Chief Engineer

- Good leadership, teamwork,

management and communication skills

- Must be willing to follow Company

planned working schedule on board vessel

As a Software Engineer

• Work with cross-functional teams which consists of Software Engineers, Quality Engineers, User Experience Designers and Product Owners to deliver technical solutions.
• Drive adoption of relevant, up-to-date technologies, practices and tools in modern software development lifecycle
• Participate in Scrum ceremonies, such as Sprint Planning, Review and Retrospective
• Participate in regular tech-sharing and solutioning sessions.
• Write code that is clean and maintainable.
• Practice code reviews
• Working in highly collaborative teams and building quality environments.
• Ability to effectively prioritize and execute tasks in a fast paced environment
• Able to work independently with little supervision or guidance.

What we are looking for:

• Degree or Diploma in Computer Science, Electronics Engineering, Information Technology or related disciplines
• Experience in modern web applications development using ReactJS, NextJS, TypeScript and Kotlin/Java
• Experience in development of CI/CD pipeline and applications deployment using cloud services such as AWS
• Experience in database migration will be an added advantage
• Working experience in an Agile/SCRUM setup will be an added advantage
• Excellent verbal communication and listening skills
• Strong Analytical and problem solving skills
• Proactive, self-driven and motivated

Job Description:

• Contribute to Life Science projects for Antaes Asia clients
• Ensures the smooth operation and optimization of the production process while upholding Good Manufacturing Practice (GMP) requirements.
• Identify opportunities for operational improvements and implement optimization strategies.
• Assist and guide Standard Users with system-related queries and issues.
• Collaborate with the production team to ensure the stability of production processes and the execution of operations.
• Respond to atypical production situations and emergencies, such as process outages, critical alarms, or equipment failures, diagnose issues and take immediate corrective actions or perform manual interventions together with Manufacturing supervisor/delegate, to restore normal operations and prevent any potential safety or quality incidents.
• Participate in manual intervention remediation projects. Identify, implement, and perform test execution for changes made to the system.
• Responsibility to adhere to any applicable EHS requirements.
• Attend to urgent requests and ensure timely resolution of issues. This involves providing support for manufacturing operations that may as and when be outside of regular office hours.
• Able to work on holidays and overtime as required. May also be required to adjust work schedule to meet production targets and demands.
• Any other duties as assigned by supervisor.
• Contribute to the promotion of Antaes services on top of assistance provided to client.

Job Requirements:

• Diploma in Applied Chemistry / Biomedical Sciences / Chemical Engineering / Bioengineering and other related fields.
• Possesses 3 – 5 years of relevant experience in the biotechnology or pharmaceutical industry.
• Skilled in navigating and utilizing PCS7 systems.
• Self-motivated team player with hands-on attitude and good communication skills
• Problem-Solving Skills with the ability to respond quickly and effectively in emergency situations.
• Good interpersonal skills for effective communication and teamwork.
• Experience in optimizing processes and providing user support.
• Capability to work independently and manage support requests outside of regular office hours.
• Working hours:
• Onsite: 2 weekdays, 8 hours each day
• Remote (WFH): Saturday and Sunday, 12 hours each day

Job Description & Requirements

· Responsible for planning and monitoring schedule for all projects

· Work closely with drafters and perform quality check of all drawings before production on site.

· Ensure the execution of works, products and services are in accordance with the customers’ requirements, drawings and specifications, etc and direct the carrying out of remedial measures to any non-conformances immediately upon discovery.

· Liaise with Project teams, authorities, client, architects and various contractors to ensure project work is carried out smoothly.

· Conduct periodic inspection of structural works.

Requirements:

· Degree in Civil/Structural Engineering recognized by P.E. Board

· Min. 3 years relevant experience in building and construction related field

· Able to work independently and in a team

Job Overview

The world will become more and more intelligent and automated in the future. Are you interested in automation?

UMC will expand production capacity and will build the first 22-nanometer production line in 'Garden City' Singapore. You'll have the opportunity to use your passion and expertise in semiconductors to turn your ideas into world-changing products.

We are looking for automation engineers to join our newly expanded fab in Singapore. You will have the opportunity to lead new technology transfer, new line setup, maintenance, quality and productivity improvements to ensure production runs smoothly.

Responsibilities

• Manage AMHS (Automatic Material Handling system), Sorter and FOUP performance metric
• Lead in AMHS daily operation, maintenance & troubleshooting and vendor liaison
• Create new function or tune system to optimize EQ/system performance
• Interact with various groups such as IT, manufacturing, EQ/Process owner and vendors to minimize downtime and maximize throughput.
• Initiate project management on cost, quality, scope and schedule to ensure timely delivery

Qualifications

• Possess at least a Bachelor in related Engineering (Electrical engineering /mechanical engineering / mechatronics / computer management)
• Possess good communication skills in working as a team
• Is self-demanding and committed to innovative solutions to complete task
• Able to think critically with strong problem solving skills
• Possess prior experience in basic IT infrastructure setup / maintenance / troubleshooting / (mainly windows based IPCs) will be an advantage
• Candidates with relevant AMHS hardware commissioning and maintenance experience may be considered for a senior position

Job Responsibilities:

• Manage and ensure updated documents and drawings are issued to the client and subcontractor
• Monitor the progress and keep track of the project timelines.
• Conduct weekly or monthly meeting with sub-contractors to update progress of work
• Ensure quality of work is achieved and all government and safety regulation are complied.
• Oversee drawing management and control of technical documentation
• Oversee and manage procurement of resources, control material usage on site.
• Organize labor, equipment and material for day to day site activities
• Any other duties assigned

Our client is looking for an experience cloud enginner. Strong knowledge in cloud ( AWS/Azure). able to deliver professional timely and effective expertise on Premise and cloud technologies. Your role including support L3 IT share service infrastructure and cloud operation,by analyze issues through root cause , implement change , develop and maintain system up to standards

Lufthansa Technik (LHT) is currently seeking a highly capable candidate for the position of Customer Engineer to join our growing team in the APAC region, based in Singapore. This position is the technical interface between the LHT engineering organisation and our airline customers, and will be responsible for:

• Interfacing to Customer Engineering teams within APAC with frequent interaction within this matrix organisation
• Representing the Customer Engineering team for the inquiries from component customers within APAC
• Maintaining & expanding good working relationship with technical departments of our airline customers
• Coordinating with the Quality Department, Process Team, etc.. Act as an extended arm of the existing APAC customer engineering team
• Preparing and presenting technical presentations. Support other existing customer engineering leads with documentation, technical analytics reports, and regular reviews
• Obtaining customer feedback regularly and identify systematic process weaknesses
• Providing technical support to customer service and sales teams (contractual contents / customer acquisition / contractual routine phase)
• Evaluating technical trends in the MRO market (such as documentation standards, etc.) and deriving customer requirements and bring insights / feedback into the organization
• Performing special tasks, participating in international projects. Be an individual contributor and support APAC customer engineering team on various value-added services and ideation. Support in strengthening LHT’s customer engineering services to meet global industry standards
• With the help of global APAC Customer Engineering team, launch internal campaigns to focus on critical topics like Reliability Engineering, Value Engineering, Predictive Analysis, Data Quality, Component removal behavior analysis, Digitalization, etc.
• All other duties as assigned or required

Your Profile

• University or technical college degree, in Engineering, Aircraft/Aeronautical Engineering or Electronics and Electrical Engineering
• Minimum 5 years of proven professional experience in the field of component overhaul and/or aircraft maintenance, reliability and technical services, ideally also a certified Design/Verification Engineer. Working experience in Part-145, CAMO, Part 21J Organization is preferred.
• Excellent spoken and written English. Knowledge of an Asian language or German is advantageous
• Proficient computer skills, Microsoft Office Suite (Word, PowerPoint, Outlook, and Excel)
• Working experience with global regions and stake holders
• High degree of intercultural competency and strong understanding of Asian cultures
• Excellent customer service skills with customer-oriented attitude, and a strong ability to build close relationships with customers
• Like working with people, solving problems, and developing yourself by being challenged in your day-to-day work
• Ability and self-driven motivation to adapt and solve complex challenges and new ways of business
• Possess a strong character with the distinction to develop and drive business and customer relationships forwards
• Ability to represent Lufthansa Technik in a consistent and professional way
• Able to travel to Germany and within Asia occasionally

If this is you, please send us your detailed resume, including your current and expected remuneration. We regret only shortlisted candidates will be notified.

Responsibilities:

• Supervise and coordinate subcontractors works to achieve daily work schedules and to ensure compliance with specific requirements
• Assist the Project Manager in planning and monitoring of construction activities and production of shop drawings
• Liaise with relevant consultants and authorities on technical and engineering matters
• Monitor and coordinate the work of Sub-cons and Supervisors
• Coordinate the inspection of Civil and Structural works

Requirements:

• Candidate must possess Bachelor's Degree in Civil Engineering
• Preferably with working experience in foundation works
• Proficient in Microsoft Office and knowledge of AUTOCAD
• Independent, diligent and highly motivated with excellent team spirit
• Willing to work overtime including weekends and public holidays when necessary

Applicants are to email to [email protected]